Relevant bibliographies by topics / Orthodontic appliance

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Orthodontic appliance'

Author: Grafiati
Published: 4 June 2021
Last updated: 12 June 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Orthodontic appliance.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Orthodontic appliance"

1

Premkumar, Sridhar, and Varun Peter. "Lingual orthodontics with customized functional appliance." Orthodontic Update 12, no. 4 (2019): 151–56. http://dx.doi.org/10.12968/ortu.2019.12.4.151.

Full text
Abstract:
Every treatment technique in the orthodontic specialty has its own set of advantages. Combining the techniques in an effective manner could result in a synergistic effect. Two such techniques are lingual orthodontics and functional orthopaedic appliances. This case report shows the effective and efficient use of a customized functional appliance, along with lingual orthodontics, in the management of Class II division 1 malocclusion. It emphasizes the importance of combining the benefits of different strategies of orthodontic treatment. CPD/Clinical Relevance: The use of a customized functional appliance along with lingual orthodontics can produce desirable changes in Class II division 1 cases and clinicians should be aware of these advantages.
APA, Harvard, Vancouver, ISO, and other styles
2

Salmi, Mika, Jukka Tuomi, Rauno Sirkkanen, Tuula Ingman, and Antti Mäkitie. "Rapid Tooling Method for Soft Customized Removable Oral Appliances." Open Dentistry Journal 6, no. 1 (2012): 85–89. http://dx.doi.org/10.2174/1874210601206010085.

Full text
Abstract:
Traditionally oral appliances i.e. removable orthodontic appliances, bite splints and snoring / sleep apnea appliances are made with alginate impressions and wax registrations. Our aim was to describe the process of manufacturing customized oral appliances with a new technique i.e. rapid tooling method. The appliance should ideally be custom made to match the teeth. An orthodontic patient, scheduled for conventional orthodontic treatment, served as a study subject. After a precise clinical and radiographic examination, the approach was to digitize the patient’s dental arches and then to correct them virtually by computer. Additive manufacturing was then used to fabricate a mould for a soft customized appliance. The mould was manufactured using stereolithography from Somos ProtoGen O-XT 18420 material. Casting material for the mould to obtain the final appliance was silicone. As a result we managed to create a customized soft orthodontic appliance. Also, the accuracy of the method was found to be adequate. Two versions of the described device were manufactured: one with small and one with moderate orthodontic force. The study person also gave information on the subjective patient adaptation aspects of the oral appliance.
APA, Harvard, Vancouver, ISO, and other styles
3

Pruzansky, DP, and JH Park. "Quality of Lab Appliances in Orthodontic Offices." Journal of Clinical Pediatric Dentistry 40, no. 6 (2016): 506–9. http://dx.doi.org/10.17796/1053-4628-40.6.506.

Full text
Abstract:
Lab appliances are an integral part of orthodontics, from active treatment to retention. The quality and fit of an appliance can affect the treatment result and stability. AIMS: This study aims to determine common points of failure in orthodontic appliances, and suggest methods to reduce this rate. METHODS: A survey consisting of 23 questions was distributed to active members of the American Association of Orthodontists (AAO) via Survey Monkey. RESULTS: The most common appliance to need an adjustment was the wrap-around retainer, with the Hawley retainer as a close second. The least common appliance needing adjustment was the Essix/clear retainer. Respondents were asked which component of each appliance was most commonly responsible for an ill-fit. For Hawley and wrap-around retainers, clasps were the most common problem at 50%, whereas spring aligners had two components - clasps and labial bows, both at 38%. Ill-fitting Essix/clear retainers had gingival impingement (52%) closely followed by poor posterior seating (43%). CONCLUSIONS: Communication between the orthodontist and lab technician can be improved by establishing a quality assurance protocol for outgoing and incoming cases. The labial bow of Hawley's, wrap-arounds and spring aligners should be clearly demarcated on the casts. Impressions should be free of distortion and casts should be inspected for accuracy. Clear retainers and positioner should be trimmed to avoid gingival impingement. The type of clasp should be selected based on the anatomy of the teeth, and bands should be checked for accuracy of fit.
APA, Harvard, Vancouver, ISO, and other styles
4

Lindawati, Yumi, Erliera Sufarnap, and Wihda Munawarah. "The Effect of Fixed Orthodontic Treatment on Salivary Component." Dentika Dental Journal 22, no. 2 (2019): 30–33. http://dx.doi.org/10.32734/dentika.v22i2.1073.

Full text
Abstract:
Saliva is a complex oral fluid that has an important role on maintaining oral health. Mechanical stimulation such as fixed orthodontic appliance can alter saliva characteristics. The objective of this study is to recognize the components of saliva in a fixed orthodontic treatment. This study in an observational analytic study with a cross sectional approach, the sample is stimulated saliva of 44 subjects (18-25 years of age) consisting of subjects without orthodontic appliance and subjects with orthodontic appliances. Sample is obtained by purposive sampling based on inclusion and exclusion criteria. The result of this study is to understand significant differences in salivary flow, pH, buffer capacity and calcium between subjects between subjects with and without orthodontic appliances (p=0,001). The conclusion in this study is that fixed orthodontic appliance can increase salivary flow, pH, buffer capacity and calcium.
APA, Harvard, Vancouver, ISO, and other styles
5

Faruk, SM Omar, and Md Zakir Hossain. "A dissertation on adolescent compliance with oral hygiene instruction during orthodontic treatment." Bangladesh Journal of Orthodontics and Dentofacial Orthopedics 3, no. 2 (2015): 18–24. http://dx.doi.org/10.3329/bjodfo.v3i2.24007.

Full text
Abstract:
Objectives: To determine the level of compliance with Oral Hygiene Instruction ( OHI) of 12 to 18 years old adolescent patient receiving orthodontic treatment at Dhaka Dental College and Hospital.Materials and Methods : In this descriptive observational study, a total number of 100 patients (37 boys & 63 girls) were selected (with convenient sampling) from Orthodontics and Dentofacial Orthopedics Department in Dhaka Dental College & Hospital. As the number of female patient is higher than that of male patient at Orthodontics and Dentofacial Orthopedics Department in Dhaka Dental College & Hospital and the samples were selected with convenient sampling, the number of female patient was higher in this study.Results: This was an observational study conducted among 100 patients in the department of Orthodontics and Dentofacial Orthopedics, Dhaka Dental College and Hospital. The result of this study indicates that after five month of insertion of orthodontic appliance, 76% patients were good complier with Oral Hygiene instruction (OHI).Conclusion: The insertion of orthodontic appliances can result in changes in the oral environment, such as causing higher concentration of acid-producing bacteria due to the difficulty of performing oral hygiene after the insertion of appliance. Orthodontic appliances can also be associated with white spots, enamel decalcification, periodontal breakdown, and development of carious lesions. Continual plaque build-up may thus jeopardize the continuity of orthodontic treatment and the achievement of successful treatment outcome. So it is very important to give Oral Hygiene Instruction (OHI) at the commencement of orthodontic treatment and close supervision of the patient during treatment.Ban J Orthod & Dentofac Orthop, April 2013; Vol-3, No.2
APA, Harvard, Vancouver, ISO, and other styles
6

Cunningham, Susan J., Steven P. Jones, Samantha J. Hodges, et al. "Advances in Orthodontics." Primary Dental Care os9, no. 1 (2002): 5–8. http://dx.doi.org/10.1308/135576102322547458.

Full text
Abstract:
There has been tremendous progress in orthodontics since Edward Angle first popularised the fixed orthodontic appliance at the turn of the century. Recent years have seen an increased demand for orthodontic treatment from both adolescents and adults and, in addition, patient and clinician expectations of treatment outcomes continue to rise. A desire for more aesthetic materials has resulted in both smaller and ‘tooth-coloured’ appliances. Improvements in technology, often outside orthodontics, have also led to the development of new materials. The best example of this was the development of nickel titanium alloy by the NASA space programme, which was subsequently adapted for use in nickel titanium archwires. Other technological advances adopted for use in orthodontics include magnets, computerised imaging systems and distraction osteogenesis. This review paper looks at some of the innovations in the fields of materials as well as in techniques and appliance systems.
APA, Harvard, Vancouver, ISO, and other styles
7

Bernabé, Eduardo, Aubrey Sheiham, and Cesar Messias de Oliveira. "Impacts on Daily Performances Related to Wearing Orthodontic Appliances." Angle Orthodontist 78, no. 3 (2008): 482–86. http://dx.doi.org/10.2319/050207-212.1.

Full text
Abstract:
Abstract Objective: To assess the prevalence, intensity, and extent of the impacts on daily performances related to wearing different types of orthodontic appliances. Materials and Methods: A total of 1657 students, 15 to 16 years old, were randomly selected from those attending all secondary schools in Bauru, São Paulo, Brazil. Only those wearing orthodontic appliances at the time of the survey were included. Face-to-face structured interviews were done to collect information about impacts on quality of life related to wearing orthodontic appliances, using the Oral Impact on Daily Performances (OIDP). Adolescents were also clinically examined to assess the type of orthodontic appliance they were wearing. Comparisons, by type of orthodontic appliance and covariables, were performed using nonparametric statistical tests. Results: Three hundred fifty-seven adolescents (36.1% boys and 63.9% girls) undergoing orthodontic treatment participated in the study. The prevalence of condition-specific impacts related to wearing orthodontic appliances was 22.7%. Among adolescents with impacts related to wearing orthodontic appliances, 35.8% reported impacts of severe or very severe intensity and 90.1% reported impacts on only one daily performance, commonly eating or speaking. The prevalence, but not the intensity or the extent, of condition-specific impacts differed by type of orthodontic appliance (P = .001). Conclusions: One in four Brazilian adolescents undergoing orthodontic treatment reported side effects, specific impacts on daily living, related to wearing orthodontic appliances. Such impacts were higher among adolescents wearing fixed rather than removable or a combination of fixed and removable orthodontic appliances. This information could help to inform patients about the frequency and intensity of sociodental impacts during the course of their treatment.
APA, Harvard, Vancouver, ISO, and other styles
8

Mittal, Anil Kumar, Ruchi Sharma, Pratibha Garg, and Amit Sidana. "Single Tooth Intrusion simplified with New Removable Orthodontic Appliance: Report of Two Cases." World Journal of Dentistry 5, no. 4 (2014): 232–36. http://dx.doi.org/10.5005/jp-journals-10015-1296.

Full text
Abstract:
ABSTRACT Intrusion of single anterior tooth done by fixed orthodontic appliance is a tedious procedure for orthodontist as well as for the patient which may be quite expensive and time consuming. The use of a new modified removable orthodontic appliance is illustrated in two case reports in this article which is especially beneficial for such cases. This removable appliance is comprised of a labial bow of 21 gauge stainless steel wire with soldered high labial bow of 19 gauge stainless steel wire which has a soldered hook permitting the use of elastic. Adams clasp and pinhead clasps are used for retention of the appliance. During intrusive force application, one component is for intrusion of tooth and other component is for labial movement. This appliance is fabricated in such a manner that the labial movement is prevented by labial component of wire and is converted into pure intrusive force as much as possible. Force levels used for tooth movement are kept within physiologic limits while using this appliance. A though, this appliance is advantageous over fixed orthodontics due its simpler and quicker chair-side procedure and low cost of treatment associated with patient comfort, patient co-operation is must for the success of this therapy. How to cite this article Mittal AK, Sharma R, Garg P, Sidana A. Single Tooth Intrusion simplified with New Removable Orthodontic Appliance: Report of Two Cases. World J Dent 2014;5(4):232-236.
APA, Harvard, Vancouver, ISO, and other styles
9

Karkhanechi, Marzieh, Denise Chow, Jennifer Sipkin, et al. "Periodontal status of adult patients treated with fixed buccal appliances and removable aligners over one year of active orthodontic therapy." Angle Orthodontist 83, no. 1 (2012): 146–51. http://dx.doi.org/10.2319/031212-217.1.

Full text
Abstract:
Abstract Objective: To compare the periodontal status of adults treated with fixed buccal orthodontic appliances vs removable orthodontic aligners over 1 year of active therapy. Materials and Methods: The study population consisted of 42 subjects; 22 treated with fixed buccal orthodontic appliances and 20 treated with removable aligners. Clinical indices recorded included: plaque index (PI), gingival index (GI), bleeding on probing (BOP), and probing pocket depth (PPD). Plaque samples were assessed for hydrolysis of N-benzoyl-DL-arginine-naphthylamide (BANA test). Indices and BANA scores were recorded before treatment and at 6 weeks, 6 months, and 12 months after initiation of orthodontic therapy. Results: After 6 weeks, only mean PPD was greater in the fixed buccal orthodontic appliance group. However, after 6 months, the fixed buccal orthodontic appliance group had significantly greater mean PI, PPD, and GI scores and was 5.739 times more likely to have a higher BANA score. After 12 months, the fixed buccal orthodontic appliance group continued to have greater mean PI, GI, and PPD, while a trend was noted for higher BANA scores and BOP. Conclusions: These results suggest treatment with fixed buccal orthodontic appliances is associated with decreased periodontal status and increased levels of periodontopathic bacteria when compared to treatment with removable aligners over the 12-month study duration.
APA, Harvard, Vancouver, ISO, and other styles
10

Jian Lau, Matthew Wen. "Comprehensive orthodontic treatment in an adolescent patient with Class II Division 1 malocclusion and ankylosed maxillary central incisors." APOS Trends in Orthodontics 9 (September 28, 2019): 190–97. http://dx.doi.org/10.25259/apos_52_2019.

Full text
Abstract:
While uncommon in orthodontics, the extraction of central incisors may be indicated when such teeth are of poor prognosis. This report details orthodontic treatment of a 13-year and 5-month-old Chinese female, who presented with Class II/1 malocclusion on a Class II skeletal jaw base relationship. Her maxillary central incisors were ankylosed and had undergone severe external root resorption following a previous traumatic episode. Orthodontic treatment involved removal of the maxillary central incisors and the mandibular first premolars. Pre-adjusted edgewise appliances with MBT prescription were used. To enhance anterior esthetics, prosthetic buildup of the four maxillary anterior teeth was performed before appliance removal. Tight intercuspation of teeth and optimal facial esthetics were achieved at appliance debond and maintained at 2-year follow-up.
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Orthodontic appliance"

1

Do-deLatour, Thuy B. "Effective maxillary protraction hyrax expansion appliance vs. double-hinged expansion appliance /." Morgantown, W. Va. : [West Virginia University Libraries], 2009. http://hdl.handle.net/10450/10287.

Full text
Abstract:
Thesis (M.S.)--West Virginia University, 2009.<br>Title from document title page. Document formatted into pages; contains viii, 99 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 83-90).
APA, Harvard, Vancouver, ISO, and other styles
2

Walton, Daniel K. "Orthodontic Appliance Preferences of Children and Adolescents." The Ohio State University, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=osu1268236105.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gupta, Vikas, and James Chen. "Removable Appliance Therapy for Interceptive Orthodontic Treatment." Scholarly Commons, 2021. https://scholarlycommons.pacific.edu/dugoni_etd/16.

Full text
Abstract:
Introduction: Socioeconomically disadvantaged children have limited access to orthodontic services not only because of their families’ competing needs for limited resources, but also because of the limited availability of orthodontists in their communities and a shortage of orthodontists who are willing to treat patients enrolled in Medicaid. We will systematically explore the hypothesis that an early interceptive treatment protocol using removable appliances provides the same treatment outcome but better cost-effectiveness than a traditional fixed-appliance protocol. Methods: Interim data on a prospective study with patients being treated either in private practice with rational fixed Phase I orthodontic treatment (n=11) or in a community clinic with removable interceptive orthodontic treatment (n=10). Initial and post treatment study models were acquired along with pretreatment PAR and clinical photos. PAR and ICON scores were assessed on all initial and final casts. Cost effective analyses were performed comparing the two treatment groups as well as comparing the removable group to no treatment. Sensitivity analyses were performed to assess the robustness of our data while manipulating certain treatment outcome variables. Results: For the fixed group the average PAR score at T2 was 7.6 with a 68% reduction from T1 to T2, while the ICON average score was 16.2 with a 67% reduction. In the removable group the average PAR score at T2 was 13.4 with a lesser reduction from T1 to T2 than the fixed group at 48% (p=0.20), while the ICON average score was 25.3 with a significantly lower reduction of 39% when compare to the fixed group (p=0.037). Cost effectiveness analyses showed that the removable appliance treatment protocol was cost effective when compared to no treatment but not cost effective when compared to 3 the traditional fixed Phase I treatment using the studies measured probabilities of success. Conclusion: The removable appliance protocol used at the Fruitvale community clinic can effectively reduce the severity of malocclusions. However, in order for this treatment to be cost effective when compared to a traditional fixed Phase I protocol it needs to demonstrate consistent clinical results and minimize the probability of “No Improvement”.
APA, Harvard, Vancouver, ISO, and other styles
4

Karl, Paul James. "The comparison of centric relation records obtained with and without the use of an anterior deprogrammer appliance." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp04/mq21090.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Miller, Kevin Blaine. "A comparison of treatment impacts between invisalign and fixed appliance therapy during the first seven days of treatment." [Gainesville, Fla.] : University of Florida, 2005. http://purl.fcla.edu/fcla/etd/UFE0010291.

Full text
Abstract:
Thesis (Ph.D.)--University of Florida, 2005.<br>Typescript. Title from title page of source document. Document formatted into pages; contains 36 pages. Includes Vita. Includes bibliographical references.
APA, Harvard, Vancouver, ISO, and other styles
6

Jambi, Safa Abdulsalam A. "Investigations into orthodontic anchorage." Thesis, University of Manchester, 2014. https://www.research.manchester.ac.uk/portal/en/theses/investigations-into-orthodontic-anchorage(b3769a47-e782-4b85-b8b4-21cb186e0fdd).html.

Full text
Abstract:
Background and objectives: The control of anchorage is integral to successful orthodontic treatment. The objective of this research was to undertake three related projects to evaluate methods of increasing anchorage with the aim of adding to orthodontic knowledge and improve methods of treatment delivery. Methods: Two Cochrane systematic reviews were undertaken according to the methods published in the Cochrane Handbook for Systematic Reviews of Interventions, version 5.1.0. The influence of functional appliances on tooth position and the extraction decision was performed as a retrospective study using participants from a completed multicentre randomized trial. Results: 1- Statistically and clinically significant differences were found between the mean values of distal molar movement when surgical anchorage and conventional anchorage were compared. 2- Statistically significant differences were found between the mean values of distal molar movement and mesial upper incisor movement when intraoral distalising appliances and cervical headgear were compared.3- Fixed and removable functional appliances are equally effective in anchorage preparation. The type of functional appliance and time spent in Phase I treatment influenced the amount of lower incisor proclination. Conclusions: 1- Surgical anchorage is more effective than headgear without the inherent risks and compliance issues. However, intraoral appliances used in adolescence for distalisation of upper molars do not appear to have any advantages over cervical headgear. 2- Functional appliances reduce the anchorage requirements of a case primarily by reduction of the overjet, both fixed and removable functional appliances are equally effective in obtaining this. However, fixed functional appliances result in greater lower incisor proclination than removable functional appliances. 3- The type of functional appliance (removable or fixed) does not influence the extraction decision, however, this is influenced by overall space requirements.
APA, Harvard, Vancouver, ISO, and other styles
7

Wucher, Tim. "The development of a new orthodontic appliance using non-conventional electromechanical methods." Thesis, Stellenbosch : Stellenbosch University, 2013. http://hdl.handle.net/10019.1/80041.

Full text
Abstract:
Thesis (MScEng)--Stellenbosch University, 2013.<br>ENGLISH ABSTRACT: Orthodontics is the eld of dentistry concerned with the treatment of maloc- clusion and anomalies of the dento-facial complex. This thesis is concerned with studying the underlying biomechanical principles of orthodontic tooth movement. It aims to develop a novel treatment approach and an orthodontic appliance to facilitate said approach by employing advanced technologies. A thorough review of the literature is used to form a comprehensive knowledge base pertaining to the factors a ecting orthodontic tooth movement. It is hypothesised that an electromechanical orthodontic appliance could improve treatment by characterising orthodontic cases based on the relationship be- tween the applied mechanical stimulus and the resulting changes to the af- fected structures, which can then be sensed by the appliance. A prototype is built using electronically controllable linear actuators and a custom built force transducer system for measuring orthodontic forces. Electronic circuits are de- veloped to connect the appliance to a USB port and allow it to be controlled from a graphical user interface (GUI). This further facilitates real-time viewing of important orthodontic parameters. Experiments are carried out to evaluate the appliance functionality with regard to the proposed hypothesis. To con- clude, the relevance of the results to the orthodontic eld is highlighted and recommendations for further development of an electromechanical orthodontic appliance are provided.<br>AFRIKAANSE OPSOMMING: Ortodonsie is die vakgebied in tandheelkunde gemoeid met die behandeling van wanpassing en abnormaliteit van die tand- en gesig-area. Hierdie tesis bestudeer die onderliggende biomeganiese beginsels van ortodontiese tandbeweging om sodoende 'n nuwe benadering sowel as 'n ortodontiese apparaat te ontwikkel om die genoemde benadering te fasiliteer deur gebruik te maak van gevorderde tegnologie. 'n Deeglike oorsig van die literatuur word gebruik om 'n omvattende kennisbasis op te bou rondom die faktore wat ortodontiese tandbeweging a ekteer. Die hipotese word gestel dat 'n elektromeganiese ortodontiese apparaat behandeling kan verbeter deur ortodontiese gevalle te identi seer/- karakteriseer gebaseer op die verhouding tussen die toegepaste meganiese stimulus en die gevolglike veranderinge aan die gea ekteerde strukture wat deur die apparaat aangevoel word. Elektronies-beheerbare lineêre aandrywers en 'n pasgemaakte krag-oordraerstelsel vir die meet van ortodontiese kragte word gebruik om 'n prototipe te vervaardig. Elektroniese stroombane word ontwikkel om die apparaat te koppel aan 'n USB poort sodat dit beheer kan word d.m.v. 'n gra ese gebruikerskoppelvlak. Eksperimente poog om die apparaat funksioneel te evalueer volgens die voorgestelde hipotese. Ter afsluiting: die toepaslikheid van die verwerfde resultate in die ortodontiese vakgebied word beklemtoon en aanbevelings word gemaak vir toekomstige/verdere ontwikkelings m.b.t. 'n elektromeganiese ortodontiese apparaat.
APA, Harvard, Vancouver, ISO, and other styles
8

Casellas, Clemente. "Skeletal and dental changes with the acrylic splint Herbst appliance." Morgantown, W. Va. : [West Virginia University Libraries], 2001. http://etd.wvu.edu/templates/showETD.cfm?recnum=1868.

Full text
Abstract:
Thesis (M.S.)--West Virginia University, 2001.<br>Title from document title page. Document formatted into pages; contains vii, 73 p. : ill. Vita. Includes abstract. Includes bibliographical references (p. 64-69).
APA, Harvard, Vancouver, ISO, and other styles
9

Van, Laecken Ryan. "Treatment effects of the edgewise Herbst appliance a cephalometric and tomographic investigation /." Morgantown, W. Va. : [West Virginia University Libraries], 2002. http://etd.wvu.edu/templates/showETD.cfm?recnum=2452.

Full text
Abstract:
Thesis (M.S.)--West Virginia University, 2002.<br>Title from document title page. Document formatted into pages; contains x, 155 p. : ill. (some col.). Vita. Includes abstract. Includes bibliographical references (p. 116-124).
APA, Harvard, Vancouver, ISO, and other styles
10

Chaowakitcharoen, Kurupin. "Dento-facial changes during stage 1 orthodontic treatment with the Begg appliance /." Title page, contents and summary only, 1996. http://web4.library.adelaide.edu.au/theses/09DM/09dmc461.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Orthodontic appliance"

1

P, McLaughlin Richard, ed. Orthodontic treatment mechanics and the preadjusted appliance. Wolfe or Mosby, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bennett, John C. Orthodontic management of the dentition with the preadjusted appliance. Mosby, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Bastien, Gill B. Applied orthodontic therapy, the straight arch appliance. Ortho Organizers, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Brandhorst, William S. A color atlas: The flexible appliance : a removable orthodontic appliance. Espaxs, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Luther, Friedy. Removable orthodontic appliances and retainers: Principles of design and use. Wiley-Blackwell, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Luther, Friedy. Removable orthodontic appliances and retainers: Principles of design and use. Wiley-Blackwell, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Malaysia. Kementerian Kesihatan. Health Technology Assessment Unit. Prefabricated myofunctional appliance for early orthodontic treatment. Health Technology Assessment Unit, Medical Development Division, Ministry of Health Malaysia, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Andrews, Lawrence F. Straight wire: The concept and appliance. L.A. Wells, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Andrews, Lawrence F. Straight wire: The concept and appliance. L.A. Weels, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Yahya, Tosun, ed. Biomechanics in orthodontics: Principles and practice. Quintessence Pub. Co., 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Orthodontic appliance"

1

Breuning, K. Hero. "Custom Appliance Design." In Digital Planning and Custom Orthodontic Treatment. John Wiley & Sons, Inc., 2017. http://dx.doi.org/10.1002/9781119087724.ch6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Breuning, K. Hero. "Custom Appliance Fabrication and Transfer." In Digital Planning and Custom Orthodontic Treatment. John Wiley & Sons, Inc., 2017. http://dx.doi.org/10.1002/9781119087724.ch7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Grigolato, Luca, Stefano Filippi, Daniela Barattin, et al. "Conceptual Design of a Functional Orthodontic Appliance for the Correction of Skeletal Class II Malocclusion." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-31154-4_28.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Melsen, Birte, Giorgio Fiorelli, Delfino Allais, and Dimitrios Mavreas. "Appliance Design." In Adult Orthodontics. John Wiley & Sons, Ltd., 2013. http://dx.doi.org/10.1002/9781118702925.ch7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Mossey, Peter A., and Colin Larmour. "The role of genetics and environmental factors on the condyle in mandibular growth." In Orthodontic Functional Appliances. John Wiley & Sons, Ltd, 2016. http://dx.doi.org/10.1002/9781119004332.ch3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Miles, Peter. "Rigid fixed functional appliances." In Orthodontic Functional Appliances. John Wiley & Sons, Ltd, 2016. http://dx.doi.org/10.1002/9781119004332.ch6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Miles, Peter. "Flexible fixed functional appliances." In Orthodontic Functional Appliances. John Wiley & Sons, Ltd, 2016. http://dx.doi.org/10.1002/9781119004332.ch7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

DiBiase, Andrew. "The use of functional appliances in the correction of Class III malocclusion." In Orthodontic Functional Appliances. John Wiley & Sons, Ltd, 2016. http://dx.doi.org/10.1002/9781119004332.ch9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Gill, Daljit S., and Farhad B. Naini. "Lingual Appliance Techniques." In Orthodontics: Principles and Practice. John Wiley & Sons, Ltd,., 2013. http://dx.doi.org/10.1002/9781118785041.ch36.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Gill, Daljit S., and Farhad B. Naini. "Functional Appliances." In Orthodontics: Principles and Practice. John Wiley & Sons, Ltd,., 2013. http://dx.doi.org/10.1002/9781118785041.ch35.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Orthodontic appliance"

1

Tilli, Jacopo, Alessandro Paoli, Armando V. Razionale, and Sandro Barone. "A Novel Methodology for the Creation of Customized Eruption Guidance Appliances." In ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/detc2015-47232.

Full text
Abstract:
Within the orthodontic field, malocclusion problems are usually treated by using different types of appliances. In particular, Eruption Guidance Appliances (EGAs) are recommended for early orthodontic treatment or prevention of malocclusion problems. The traditional approach with EGAs is based on the use of standard prefabricated appliances. Experts in the orthodontic field believe that the customization of the EGAs would strongly enhance the results of malocclusion treatments. This paper presents an innovative methodology for the design and manufacturing of fully customized EGAs. The methodology is based on an extensive integration between traditional orthodontic procedures with advanced computer aided design processes. The methodology moves from the digitalization of the plaster models obtained by optical scanning techniques. The patient morphology is then exploited, under dental practitioner supervision, for the design of the appliance geometry through CAD modeling tools. Medical guided assessment is required throughout the most of the data elaboration processes, in order to design the EGAs accordingly to the patient’s clinical conditions. Low-pressure injection molds for the physical manufacturing of the appliances are then 3D printed by using rapid prototyping techniques. The proposed methodology allows the production of patient customized appliances guaranteeing low cost manufacturing and high quality standards, similar to those typically obtained by in series productions. Moreover, the presented approach offers a high integration level with numerical and finite element methods, which can be used for evaluating the stress applied on the EGA, thus allowing the reinforcement of the appliance prior its manufacturing.
APA, Harvard, Vancouver, ISO, and other styles
2

Setiawan. "Dental Implant Placement With Horizontal Bone Augmentationand Space Regainer Using Partial Orthodontic Fix Appliance." In The 7th International Meeting and The 4th Joint Scientific Meeting in Dentistry. SCITEPRESS - Science and Technology Publications, 2017. http://dx.doi.org/10.5220/0007296602810284.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Li, Shuning, and Jie Chen. "Quantification of Tooth Displacement From Dental Casts." In ASME 2008 Summer Bioengineering Conference. American Society of Mechanical Engineers, 2008. http://dx.doi.org/10.1115/sbc2008-192058.

Full text
Abstract:
In orthodontics, patients are treated by moving teeth to improve esthetics and occlusion. Tooth displacement is one of the most important outcomes, and can be used to evaluate treatment strategies and orthodontic appliances. Thus, an accurate and reliable method for quantification of the three dimensional (3D) tooth displacements is of high interest [1].
APA, Harvard, Vancouver, ISO, and other styles
4

Savignano, Roberto, Sandro Barone, Alessandro Paoli, and Armando V. Razionale. "FEM Analysis of Bone-Ligaments-Tooth Models for Biomechanical Simulation of Individual Orthodontic Devices." In ASME 2014 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/detc2014-34912.

Full text
Abstract:
In the last decades, research in the orthodontic field has focused on the development of more comfortable and aesthetic appliances such as thermoformed aligners. Aligners have been used in orthodontics since the mid 20-century. Nonetheless, there is still not enough knowledge about how they interact with teeth. This paper is focused on the development of a Finite Element Method (FEM) model to be used in the optimization process of geometrical attributes of removable aligners. The presented method integrates Cone Beam Computed Tomography (CBCT) data and optical data in order to obtain a customized model of the dental structures, which include both crown and root shapes. The digital simulation has been focused on analyzing the behavior of three upper frontal teeth. Moreover, the analyses have been carried out by using different aligners’ thicknesses with the support of composite structures polymerized on teeth surfaces while simulating a 2 degrees rotation of an upper central incisor.
APA, Harvard, Vancouver, ISO, and other styles
5

Lindawati, Yumi, Erliera Sufarnap, and Wihda Munawwarah. "Effects of Fixed Orthodontic Appliances on Salivary Conditions." In International Conference of Science, Technology, Engineering, Environmental and Ramification Researches. SCITEPRESS - Science and Technology Publications, 2018. http://dx.doi.org/10.5220/0010075804910494.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Benjamin, Ellis, Ashleigh Augello, and Earl Benjamin. "Designing Caspase-1 kinase inhibitors to control acute inflammation of Orthodontic Appliances." In The 17th International Electronic Conference on Synthetic Organic Chemistry. MDPI, 2013. http://dx.doi.org/10.3390/ecsoc-17-e019.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Zegan, Georgeta, Daniela Anistoroaei, Alina Sodor, and Cristina Gena Dascalu. "Structural changes of the human saliva chemical composition at wearers of orthodontic appliances." In 2017 E-Health and Bioengineering Conference (EHB). IEEE, 2017. http://dx.doi.org/10.1109/ehb.2017.7995403.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography