Relevant bibliographies by topics / Orthodontics Orthodontics

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Orthodontics Orthodontics'

Author: Grafiati
Published: 4 June 2021
Last updated: 15 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Orthodontics Orthodontics.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Orthodontics Orthodontics"

1

Bagga, Dinesh K. "Adult Orthodontics Versus Adolescent Orthodontics: An Overview." Journal of Oral Health and Community Dentistry 4, no. 2 (2010): 42–47. http://dx.doi.org/10.5005/johcd-4-2-42.

Full text
Abstract:
ABSTRACT The scope of orthodontics has widened to include not only children and adolescents but also adults, thereby abolishing the upper age limit. With growing esthetic conscience among the society, a great number of young adults are seeking orthodontic treatment primarily for esthetic reasons. They undergo comprehensive orthodontic treatment involving major occlusal changes to get the utmost esthetically pleasing face. The older adults with poor dental conditions requiring perio-restorative treatment undergo adjunctive orthodontic treatment to attain a long-term prognosis. The orthodontist faces challenges to practice adult orthodontics due to various issues being under considerations, which are quite different than routine orthodontic treatment oriented to children and adolescents. This article highlights the difficulties and limitations faced by the orthodontist while practicing adult orthodontics with remedies to overcome them.
APA, Harvard, Vancouver, ISO, and other styles
2

Nanda, Ravindra, and Philippe Amat. "Une orthodontie contemporaine fondée sur l'harmonie esthétique et sur la biomécanique. Un entretien avec Ravindra Nanda." L'Orthodontie Française 88, no. 4 (2017): 297–317. http://dx.doi.org/10.1051/orthodfr/2017029.

Full text
Abstract:
Le Pr Ravindra Nanda a obtenu une licence et une maîtrise en dentisterie et en orthodontie du King George's Medical College, Lucknow University. En 1967, il a intégré l'Université Catholique de Nimègue, aux Pays-Bas, où il a obtenu un doctorat en philosophie en 1969. Il a rejoint la nouvelle école dentaire de Loyola à Chicago en 1970, après avoir occupé le poste de Professeur assistant en orthodontie dans le service dirigé par Frans van der Linden. En 1972, il fut promu au Département d'Orthodontie de l'Université du Connecticut à Farmington, CT, et y reçu son certificat en orthodontie sous la direction de Charles Burstone. Professeur adjoint, puis professeur titulaire à partir de 1979, il a assumé le poste de Chef du Département d'Orthodontie à partir de 1992 et a été promu pour diriger le Département des Sciences Craniofaciales en 2004, dont les divisions de chirurgie orale et maxillo-faciale, de dentisterie pédiatrique, de l'enseignement supérieur en dentisterie générale et en orthodontie. Il est membre et ancien président de la composante Atlantique Nord de la Edward H. Angle Society of Orthodontists. Il occupe actuellement la fonction de rédacteur en chef de Progress in Orthodontics, de rédacteur associé du Journal of Clinical Orthodontics et est membre du comité éditorial de neuf revues d'orthodontie nationales et internationales. Il est membre de l'Association dentaire américaine, de l'Association dentaire de l'État du Connecticut, de la Hartford Dental Society, de l'Association américaine des orthodontistes, de la Société européenne d'orthodontie, de l'Association internationale de recherche dentaire et du College of Diplomates of American Board of Orthodontists. Il a rédigé et publié sept manuels et plus de 200 articles dans des revues à comité de lecture. Il a donné des conférences magistrales dans plus de 40 pays et a reçu de nombreux prix et honneurs pour ses contributions en dentisterie et en orthodontie, aux États-Unis et de la part d'organisations internationales d'orthodontie. Il est membre d'honneur des Jordan Orthodontic Society, Czech Orthodontic Society, Taiwanese Orthodontic Society, Central American Orthodontics Society et membre d'honneur à vie de l'Indian Orthodontic Society. Ravindra Nanda a été honoré du Life Time Achievement Award (University of Connecticut Foundation), et il est Senior Research Fellow (Japan Promotion for Science, Sendai, Japan − Tohoku University). Il a prononcé de nombreuses conférences d'honneur : la John Taylor Lecture, lors de la réunion annuelle de l'Australian Society of Orthodontics Foundation, la Sheldon Friel Memorial Lecture lors de la réunion annuelle de l'European Orthodontic Society, la Gordon Kirkness Memorial Lecture lors de la réunion annuelle de l'Australian Society of Orthodontics, la John Mershon Memorial Lecture, Boston, Massachusetts lors de la réunion annuelle de l'American Association of Orthodontics et la Wendell L. Wylie Memorial Lecture, à l'Université de San Francisco, Californie.
APA, Harvard, Vancouver, ISO, and other styles
3

Jawad, Zynab, Sophy Barber, Monty Duggal, and Nadine Houghton. "Tooth autotransplantation 2: the interdisciplinary approach with emphasis on the orthodontic aspects." Orthodontic Update 12, no. 3 (2019): 98–105. http://dx.doi.org/10.12968/ortu.2019.12.3.98.

Full text
Abstract:
Autotransplantation relies on successful interdisciplinary teamwork, utilizing the skills of each team member to optimize the outcome. During treatment planning, orthodontic input is required to determine whether orthodontic treatment is indicated and if a suitable donor tooth will be available. The orthodontist has a role in providing pre-surgical orthodontics to prepare the recipient site for the donor tooth and post-surgical orthodontics to correct the malocclusion fully and achieve the treatment goals. This article will outline the role of the interdisciplinary team members with an emphasis on the orthodontic aspects of treatment planning and the orthodontic treatment components of the autotransplantation pathway. CPD/Clinical Relevance: Orthodontists have a key role in the autotransplantation team for both planning and provision of care. This article provides information for clinicians who wish to refer patients for autotransplantation or provide orthodontic care as part of the interdisciplinary team.
APA, Harvard, Vancouver, ISO, and other styles
4

Smorthit, Kelly, David Sawbridge, and Rhian Fitzgerald. "Eating disorders and the orthodontist: Diagnosis, considerations and referral." Journal of Orthodontics 48, no. 3 (2021): 313–22. http://dx.doi.org/10.1177/1465312521993491.

Full text
Abstract:
Background: Eating disorders are relatively common mental health disorders in Western European and North American populations. The peak incidence occurs within the adolescent years, which correlates with the largest orthodontic patient population. The morbidity associated with these psychological conditions is significant, and has a direct impact upon patient well-being, orthodontic outcomes and the success of treatment. Therefore, it is of relevance to the orthodontist to be aware of potential presenting features of these conditions, when and where to seek advice, and how such disorders may impact upon orthodontic outcomes. Methods: Articles published on PUBMED and MEDLINE relevant to orthodontics and eating disorders were reviewed. Key information was extracted, and the relevant evidence for the orthodontist summarised. Results: Eating disorders may present to the orthodontist in specialist or hospital practice, either undiagnosed or as a co-morbidity. Orthodontists may benefit from an appreciation of these potential diagnoses, the orthodontic implications and to have the confidence to refer their patients to the necessary services. Limitations: There is little existing research in this area. Conclusions: These conditions have a significant impact on patient morbidity and mortality. This cohort of patients is not suitable for orthodontic treatment while their disease is active. The impact of a developing eating disorder can adversely affect orthodontic treatment.
APA, Harvard, Vancouver, ISO, and other styles
5

Das, Surya Kanta, Sanjay Labh, and Ashish Kumar Barik. "Lingual orthodontic education: An insight." APOS Trends in Orthodontics 6 (July 15, 2016): 185–90. http://dx.doi.org/10.4103/2321-1407.186432.

Full text
Abstract:
Despite increasing demand for lingual orthodontics, the technique is not very popular among the orthodontists in general. Lingual orthodontics differs from the conventional labial technique in all aspects. Lack of comprehensive training in this field is a major obstacle in popularizing this science of invisible orthodontics. At present, short-term courses and part-time degree programs are the means to learn this technique and the demand for more comprehensive lingual orthodontic education is on a rise among orthodontists. Lingual orthodontics as a super specialty discipline with full-time residency program can be a step forward. This will groom orthodontists to acquire the finest skills to finish lingual cases but also help to the science to grow with dedicated research work.
APA, Harvard, Vancouver, ISO, and other styles
6

Ditmarov, A. "Orthodontics: Orthodontics vs orthodontiya." British Dental Journal 225, no. 1 (2018): 2. http://dx.doi.org/10.1038/sj.bdj.2018.549.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Anindita Mallik, Yagyeshwar Malhotra, Amita Badhan, Parul Uppal Malhotra, and Deepali Rasila. "Current Trends in Orthodontics." International Healthcare Research Journal 4, no. 8 (2020): RV1—RV4. http://dx.doi.org/10.26440/ihrj/0408.11285.

Full text
Abstract:
The scope for orthodontics increases as recent innovative ideas becomes successfully demonstrated and applied. The emphasis nowadays in on the holistic correction of the face rather than the dentition. In the field of orthodontics new innovations have not only increased the efficiency of an orthodontist to produce better results but at the same time, reduced the treatment duration, thus positively influencing the patient compliance. So it seems a win-win state for both the orthodontist and the patient. New solutions for the old problems have resulted in advancements in orthodontic materials and their cascading effect on appliance design and treatment strategies. This article briefly embraces us about the recent trends being followed by an orthodontist to achieve better results in shorter duration.
APA, Harvard, Vancouver, ISO, and other styles
8

Marques, Leandro Silva, Nacler de Freitas Junior, Luciano José Pereira, and Maria Letícia Ramos-Jorge. "Quality of orthodontic treatment performed by orthodontists and general dentists." Angle Orthodontist 82, no. 1 (2011): 102–6. http://dx.doi.org/10.2319/061311-389.1.

Full text
Abstract:
AbstractObjective:To perform a blind comparative evaluation of the quality of orthodontic treatment provided by orthodontists and general dentists.Materials and Methods:Sixty cases of orthodontic treatment were evaluated—30 treated by specialists in orthodontics and 30 treated by general dentists with no specialization course. Orthodontists were selected randomly by lots, in a population of 1596 professionals, and recordings were performed based on the guideline established by the Objective Grading System proposed by the American Board of Orthodontics. Each participant was asked to present a case considered representative of the best outcome among the cases treated, regardless of the type or initial severity of the malocclusion. Statistical analysis involved the chi-square, Wilcoxon, and Mann-Whitney tests. The level of significance was set at P = .05 for the statistical tests.Results:The results showed that 29 orthodontists (96.7%) presented cases considered satisfactory and would be approved on the qualification exam, whereas only 15 dentists (50%) had cases considered satisfactory. Moreover, treatment time was significantly shorter among the orthodontists (P = .022), and the posttreatment comparison revealed that orthodontists achieved better outcomes considering all the variables studied.Conclusions:Orthodontists spend less time on treatment and achieve better quality outcomes than cases treated by general dentists who have not undergone a specialization course in orthodontics.
APA, Harvard, Vancouver, ISO, and other styles
9

Mesaros, Anca, Michaela Mesaros, Diana Dudea, Alexandrina Muntean, and Mandra Badea. "Ceramics and Orthodontics." Key Engineering Materials 587 (November 2013): 343–48. http://dx.doi.org/10.4028/www.scientific.net/kem.587.343.

Full text
Abstract:
Introduction: An orthodontist has two clinical situations in which he is confronted with ceramics: 1. Use of ceramic brackets 2. Applying brackets on teeth with ceramic restorations. Aim: The present study wishes to emphasize the advantages and the disadvantages that the use of ceramics has brought to the orthodontic profession. Material And Method: 75 consecutive adult orthodontic patients after being presented with their treatment plan were administered a questioner to motivate their choice in the type of braces and the cases with aesthetic braces or which had ceramic restorations prior to orthodontics received a special follow-up threw-out their treatment. Results: Ceramic braces are chosen for aesthetic reasons but sometimes they create other type of problems during treatment. Adhesion between braces and ceramic restorations rests problematic. Conclusions: The use of ceramics in orthodontics was indispensable but dental materials still need to be perfected.
APA, Harvard, Vancouver, ISO, and other styles
10

Tekale, Pawankumar D., Arun R. Mhaske, Vishwas Diwakar Acharya, Harshal A. Patil, Chetankumar O. Agarwal, and Bharti M. Aru. "Clinical Management and Guidelines for Infective Endocarditis in Orthodontics." World Journal of Dentistry 6, no. 4 (2015): 226–28. http://dx.doi.org/10.5005/jp-journals-10015-1348.

Full text
Abstract:
ABSTRACT The fixed orthodontic treatment is not contraindicated in systemic disorders, where orthodontist reveals the diagnosis from medical practitioner and plan the orthodontic treatment, oral hygiene maintenance and necessary prophylaxis. Due to privation of practical guidelines and fear of advancing the contagion, many orthodontist do not treat patient potentially at the risk of developing endocarditis. This review article highlights the sign, symptoms, orthodontic guidelines and prophylaxis modalities for infective endocarditis (IE). How to cite this article Tekale PD, Mhaske AR, Acharya VD, Patil HA, Agarwal CO, Aru BM. Clinical Management and Guidelines for Infective Endocarditis in Orthodontics. World J Dent 2015;6(4):226-228.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Orthodontics Orthodontics"

1

Fergus, Kelly-Gwynne Mason. "Esthetic evaluation of edgewise orthodontic treatment in matched class II, division 1 subjects, with and without a MARA." View the abstract Download the full-text PDF version, 2008. http://etd.utmem.edu/ABSTRACTS/2008-022-Fergus-index.html.

Full text
Abstract:
Thesis (M.S. )--University of Tennessee Health Science Center, 2008.<br>Title from title page screen (viewed on July 30, 2008). Research advisor: Edward F. Harris, Ph.D. Document formatted into pages (xi, 174 p. : ill.). Vita. Abstract. Includes bibliographical references (p. 103-112).
APA, Harvard, Vancouver, ISO, and other styles
2

Vargas, Deborah Bayer Ferraz. "Estudo comparativo da retenção das bandas ortodônticas Grip Tite, convencional e convencional com a superfície interna microjateada por óxido de alumínio /." Araraquara : [s.n.], 2007. http://hdl.handle.net/11449/95778.

Full text
Abstract:
Orientador: Lídia Parsekian Martins<br>Banca: Dirceu Barnabé Raveli<br>Banca: Ana Cláudia de Mello<br>Resumo: O objetivo do presente trabalho foi avaliar in vitro, por meio de um ensaio mecânico, a força necessária para a remoção das bandas ortodônticas Grip Tite (C), Convencional (A) e banda Convencional com a superfície interna microjateada por óxido de alumínio (B). Também analisar visualmente a quantidade de cimento residual, e classificar usando uma escala de incrementos a 25%. Após, verificar, por meio de MEV, a superfície com melhores características para a retenção. Os resultados obtidos mostraram que a média de carga do Grupo B, bandas microjateadas internamente por óxido de alumínio, foi significantemente maior que as médias dos Grupos A, bandas Convencionais, e C, bandas Grip Tite. Quanto a quantidade de cimento remanescente nas bandas, o Grupo B apresentou 100% das bandas com índice 4, indicando a presença de mais de 75% de cimento residual nas bandas, enquanto que nos Grupos A e C, houve a predominância do índice 1, indicativo de menos de 25% de cimento residual nas bandas, sem diferença significativa entre esses dois grupos. Os resultados foram confirmados pela MEV, onde observou-se uma superfície com melhores características para a retenção do cimento nas bandas onde foi realizado o processo de microjateamento. Conclui-se que o processo de microjateamento por óxido de alumínio, na superfície interna das bandas convencionais, aumenta a força necessária para a remoção das bandas e aumenta a quantidade de cimento residual preso à superfície da banda. Quando analisada pela MEV, essa superfície apresenta-se como a mais áspera e rugosa, com a maior quantidade de cimento de ionômero de vidro aderido à banda.<br>Abstract: The purpose of this study was to evaluate in vitro, the necessary force for the removal of Grip Tite, Conventional and Sandblasted orthodontics molar bands, as well as, to analyze and to classify the amount of residual cement in the internal surface of these bands. After that, checking through scanning electron microscopy, the surface with better characteristics for the retention. The obtained results showed that the load average of the group B, Sandblasted bands, was significantly higher than the group A, Conventional bands, and C, Grip Tite bands. Observing the amount of remaining cement in the bands, group B presented 100% of the bands with index 4, indicating the presence of more than 75% of residual cement in the bands, while in the groups A and C, had the predominance of index 1, indicative of less than 25% of residual cement in the bands, without significant difference between these two groups. The results were confirmed by the scanning electronic microscopy, where the surface with better characteristics for the retention of the cement was observed, in the bands where the sandblasted process was carried through. It was concluded that the process of sandblasted, in the internal surface of the conventional bands, increases the necessary force for the removal of the bands and increases the amount of residual cement in the internal surface of the band. When analyzed by the scanning electronic microscopy, this surface appeared rougher and corrugated, with great amount of glass ionomer cement adhered to the band.<br>Mestre
APA, Harvard, Vancouver, ISO, and other styles
3

Porter, Jason L. "Comparison of intraoral and extraoral scanners on the accuracy of digital model articulation." VCU Scholars Compass, 2017. http://scholarscompass.vcu.edu/etd/4881.

Full text
Abstract:
Introduction: Orthodontists increasingly rely on digital models in clinical practice. The ability of modern scanners to articulate digital models must be scientifically evaluated. Methods:Twenty five digital articulated models were produced from four digital scanners in five experimental groups. The resulting inter-arch measurements were compared to the gold standard. An acceptable range of 0.5mm more or less than the gold standard was used for evaluation. Results: iTero® and iTero® Element yielded all acceptable inter-arch measurements. The 3M™ True Definition and Ortho Insight 3D® with Regisil® bite registration produced four of six acceptable inter-arch measurements. The Ortho Insight 3D® with Coprwax ™ bite registration yielded three of six acceptable inter-ach measurements. Conclusions: The iTero® and iTero® Element produced the most accurately articulated models. The 3M™ True Definition and Ortho Insight 3D® with Regisil® were the next most accurate. The Ortho Insight 3D® scanner with Coprwax ™ was the least accurate method tested.
APA, Harvard, Vancouver, ISO, and other styles
4

Du, Raan Frederick Johannes. "Influence of orthodontic caregiver behaviour on the perceived satisfaction of patients during orthodontic treatment." Thesis, University of the Western Cape, 2014. http://hdl.handle.net/11394/4247.

Full text
Abstract:
Magister Scientiae Dentium - MSc(Dent)<br>Influence of orthodontic caregiver behaviour on the perceived satisfaction of patients during orthodontic treatment. Dr. F.J. du Raan M.Sc. (Orthodontics) thesis, Department of Orthodontics, University of the Western Cape. In this thesis I interviewed patients that are busy with orthodontic treatment, as well as those that have undergone orthodontic treatment at the department of Orthodontics at the University of the Western Cape, with the aid of four questionnaires. Patients completed questionnaires to provide general and demographic information, quantify their satisfaction with the orthodontic treatment process, their perception of the orthodontic clinician's behavioural traits and lastly they completed the NEO-FFI personality questionnaire to determine their own personality profile. All these questionnaires were used in previous studies, or they were slightly modified to be applicable to orthodontics. The information gained was used to determine if there are correlations between the patient’s perceived satisfaction of the treatment process with patient specific treatment variables (as acquired from the General information and Demographics Questionnaire ), demographic factors, clinician's behavioural traits and patient specific personality traits and any combination of the above mentioned. We wanted to determine which behavioural traits of the orthodontic caregiver influences the perceived satisfaction with the treatment to the greatest extent. Furthermore, we wanted to determine if certain personality traits of the patients would influence their perceived satisfaction with the treatment process or their perception of the clinician's behavioural traits. The only aspect from the General Information and Demographics Questionnaire that had any correlation to satisfaction with the treatment process or the perception of the clinician's behavioural traits, was whether the patient was treated by a single registrar or multiple registrars. Patients treated by multiple clinicians had a lower average score for satisfaction and orthodontist behaviour. Results from the study shows that all the clinician's behavioural traits do have statistically significant influence on the perceived satisfaction with the treatment process, but certain behavioural traits have a greater influence. Result showed Empathy and Care to have the strongest influence on perceived satisfaction, whereas Motivation has the lowest influence. The NEO-FFI personality questionnaire was used to register each patient's personality profile. Scoring for the following personality traits created the personality profile: Neuroticism, Extraversion, and Openness to Experience, Conscientiousness and Agreeableness. Patient personality profiles were shown to have no significant influence on the patient's perceived satisfaction with the treatment process.Neuroticism was shown to have a weak negative correlation with the Professionalism sub-category of the Orthodontic Clinician Behaviour Questionnaire. Conscientiousness has been shown to have a weak positive correlation with all categories of the Orthodontic Clinician Behaviour Questionnaire It is put forth by the researcher that more time and effort has to be put into improving all aspects of the clinician's behaviour, as it will positively influence the perceived satisfaction of the orthodontic treatment process.Even though there are no significant correlations, patients needs to be screened to determine their personality profiles, as this may lead to slight improved scoring on certain behavioural aspects which may in turn lead to greater patient satisfaction. It may be especially worthwhile to recognise the neurotic patient and treat them on a more personal level, as this may improve their overall satisfaction.
APA, Harvard, Vancouver, ISO, and other styles
5

Tse, Lap Kee Edmond. "A comparative study of the skeletal and dental effects of a modified herbst and the traditional herbst appliances in Southern Chinese a prospective cephalometric study /." Click to view the E-thesis via HKUTO, 1994. http://sunzi.lib.hku.hk/HKUTO/record/B38628454.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Almandaey, Abdulhakim Ahmad Q. A. "Surgical exposure, bonding and orthodontic traction of impacted maxillary anterior teeth a retrospective study /." Click to view the E-thesis via HKUTO, 2007. http://sunzi.lib.hku.hk/hkuto/record/B39766135.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Almandaey, Abdulhakim Ahmad Q. A. "Surgical exposure, bonding and orthodontic traction of impacted maxillary anterior teeth: a retrospectivestudy." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2007. http://hub.hku.hk/bib/B39766135.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

謝立祺 and Lap Kee Edmond Tse. "A comparative study of the skeletal and dental effects of a modified herbst and the traditional herbst appliances in Southern Chinese: a prospective cephalometric study." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1994. http://hub.hku.hk/bib/B38628454.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Trohatos, Emily. "An evaluation of changes to the referral base of one orthodontic specialist over a 24-year period." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape8/PQDD_0005/MQ41641.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Vargas, Deborah Bayer Ferraz [UNESP]. "Estudo comparativo da retenção das bandas ortodônticas Grip Tite, convencional e convencional com a superfície interna microjateada por óxido de alumínio." Universidade Estadual Paulista (UNESP), 2007. http://hdl.handle.net/11449/95778.

Full text
Abstract:
Made available in DSpace on 2014-06-11T19:27:54Z (GMT). No. of bitstreams: 0 Previous issue date: 2007Bitstream added on 2014-06-13T18:56:43Z : No. of bitstreams: 1 vargas_dbf_me_arafo.pdf: 680704 bytes, checksum: b86da5b28576f3b91eb2292fc618c8b8 (MD5)<br>Universidade Estadual Paulista (UNESP)<br>O objetivo do presente trabalho foi avaliar in vitro, por meio de um ensaio mecânico, a força necessária para a remoção das bandas ortodônticas Grip Tite (C), Convencional (A) e banda Convencional com a superfície interna microjateada por óxido de alumínio (B). Também analisar visualmente a quantidade de cimento residual, e classificar usando uma escala de incrementos a 25%. Após, verificar, por meio de MEV, a superfície com melhores características para a retenção. Os resultados obtidos mostraram que a média de carga do Grupo B, bandas microjateadas internamente por óxido de alumínio, foi significantemente maior que as médias dos Grupos A, bandas Convencionais, e C, bandas Grip Tite. Quanto a quantidade de cimento remanescente nas bandas, o Grupo B apresentou 100% das bandas com índice 4, indicando a presença de mais de 75% de cimento residual nas bandas, enquanto que nos Grupos A e C, houve a predominância do índice 1, indicativo de menos de 25% de cimento residual nas bandas, sem diferença significativa entre esses dois grupos. Os resultados foram confirmados pela MEV, onde observou-se uma superfície com melhores características para a retenção do cimento nas bandas onde foi realizado o processo de microjateamento. Conclui-se que o processo de microjateamento por óxido de alumínio, na superfície interna das bandas convencionais, aumenta a força necessária para a remoção das bandas e aumenta a quantidade de cimento residual preso à superfície da banda. Quando analisada pela MEV, essa superfície apresenta-se como a mais áspera e rugosa, com a maior quantidade de cimento de ionômero de vidro aderido à banda.<br>The purpose of this study was to evaluate in vitro, the necessary force for the removal of Grip Tite, Conventional and Sandblasted orthodontics molar bands, as well as, to analyze and to classify the amount of residual cement in the internal surface of these bands. After that, checking through scanning electron microscopy, the surface with better characteristics for the retention. The obtained results showed that the load average of the group B, Sandblasted bands, was significantly higher than the group A, Conventional bands, and C, Grip Tite bands. Observing the amount of remaining cement in the bands, group B presented 100% of the bands with index 4, indicating the presence of more than 75% of residual cement in the bands, while in the groups A and C, had the predominance of index 1, indicative of less than 25% of residual cement in the bands, without significant difference between these two groups. The results were confirmed by the scanning electronic microscopy, where the surface with better characteristics for the retention of the cement was observed, in the bands where the sandblasted process was carried through. It was concluded that the process of sandblasted, in the internal surface of the conventional bands, increases the necessary force for the removal of the bands and increases the amount of residual cement in the internal surface of the band. When analyzed by the scanning electronic microscopy, this surface appeared rougher and corrugated, with great amount of glass ionomer cement adhered to the band.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Orthodontics Orthodontics"

1

Thurow, Raymond C. Edgewise orthodontics. GAC, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Parkhouse, Richard. Tip-edge orthodontics. Mosby, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

P, McLaughlin Richard, ed. Orthodontic treatment mechanics and the preadjusted appliance. Wolfe or Mosby, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bennett, John C. Orthodontic management of the dentition with the preadjusted appliance. Mosby, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

E, Moyers Robert, ed. Handbook of orthodontics. 4th ed. Year Book Medical Publishers, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Lawson, Harvey W. Bench-top orthodontics. Quintessence Pub. Co., 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Orthodontics with fixed appliances. Quintessence Pub. Co., 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Andres, Uribe Flavio, ed. Temporary anchorage devices in orthodontics. Mosby, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Orton, Harry S. Functional appliances in orthodontic treatment: An atlas of clinical prescription and laboratory construction. Quintessence Pub. Co., 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Richard, Parkhouse, ed. Tip-edge orthodontics and the plus bracket. 2nd ed. Mosby, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Orthodontics Orthodontics"

1

Warshawsky, Neil, Henry Schupert, and Howard Aduss. "Orthodontics." In Ferraro's Fundamentals of Maxillofacial Surgery. Springer New York, 2014. http://dx.doi.org/10.1007/978-1-4614-8341-0_28.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Sedeño, Eddy J., Melissa Alfonso, and Calogero Dolce. "Orthodontics." In The Dental Reference Manual. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-39730-6_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hartsfield, James K. "Personalized orthodontics." In Biological mechanisms of tooth movement. John Wiley & Sons, Ltd, 2015. http://dx.doi.org/10.1002/9781118916148.ch12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Krishnan, Vinod, and Ze'ev Davidovitch. "Biologic orthodontics." In Biological mechanisms of tooth movement. John Wiley & Sons, Ltd, 2015. http://dx.doi.org/10.1002/9781118916148.ch14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Gill, Daljit S., and Farhad B. Naini. "Interceptive Orthodontics." In Orthodontics: Principles and Practice. John Wiley & Sons, Ltd,., 2013. http://dx.doi.org/10.1002/9781118785041.ch20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Dalbah, Lana. "Digital Orthodontics." In Digitization in Dentistry. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-65169-5_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Melsen, Birte. "Potential Adult Orthodontic Patients - Who Are They?" In Adult Orthodontics. John Wiley & Sons, Ltd., 2013. http://dx.doi.org/10.1002/9781118702925.ch1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bindslev, Dorthe Arenholt. "Material-Related Adverse Reactions in Orthodontics." In Adult Orthodontics. John Wiley & Sons, Ltd., 2013. http://dx.doi.org/10.1002/9781118702925.ch10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Melsen, Birte. "Patients with Periodontal Problems." In Adult Orthodontics. John Wiley & Sons, Ltd., 2013. http://dx.doi.org/10.1002/9781118702925.ch11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Janer, Jaume. "A Systematic Approach to the Orthodontic Treatment of Periodontally Involved Anterior Teeth." In Adult Orthodontics. John Wiley & Sons, Ltd., 2013. http://dx.doi.org/10.1002/9781118702925.ch12.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Orthodontics Orthodontics"

1

Li, Shuning, and Jie Chen. "Quantification of Tooth Displacement From Dental Casts." In ASME 2008 Summer Bioengineering Conference. American Society of Mechanical Engineers, 2008. http://dx.doi.org/10.1115/sbc2008-192058.

Full text
Abstract:
In orthodontics, patients are treated by moving teeth to improve esthetics and occlusion. Tooth displacement is one of the most important outcomes, and can be used to evaluate treatment strategies and orthodontic appliances. Thus, an accurate and reliable method for quantification of the three dimensional (3D) tooth displacements is of high interest [1].
APA, Harvard, Vancouver, ISO, and other styles
2

Ryzhkova, Anastasia V., Nina G. Lebedeva, Alexey V. Sedykh, Sergey S. Ulyanov, Alexander V. Lepilin, and Natalia A. Kharish. "Laser diagnostics in orthodontics." In SPIE Proceedings, edited by Valery V. Tuchin. SPIE, 2003. http://dx.doi.org/10.1117/12.518848.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Bani-Hani, Muath, M. Amin Karami, Nikta Amiri, and Mostafa Tavakkoli Anbarani. "Piezoelectric Teeth Aligners for Accelerated Orthodontics." In ASME 2018 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/smasis2018-8199.

Full text
Abstract:
In this paper, a new prototype is proposed for accelerated orthodontic tooth treatment. In contrast to conventional methods, where heavy vibration generators are used, the proposed design is light and small and may remain into patient’s mouth without obstructing his daily activities. To do that, a PVDF Piezoelectric actuator layer is incorporated into a bio-compatible flexible structure which is to be excited by an external electric source. Generally, application of cyclic loading (vibration) reverses bone loss, stimulates bone mass, induces cranial growth, and accelerates tooth movement. This reduce the pain experience and discomfort associated with the treatment and also enhances the patient compliance with the treatment. Vibration has the advantage of minimal side effects in comparison to medicinal treatments. This configuration enables the operator to adjust the vibration frequency as well as the orthodontic force exerted on the tooth.
APA, Harvard, Vancouver, ISO, and other styles
4

Xu, Hongyu, and Yuanjun Wang. "Application Research of CBCT in Orthodontics." In Proceedings of the 2018 4th International Conference on Social Science and Higher Education (ICSSHE 2018). Atlantis Press, 2018. http://dx.doi.org/10.2991/icsshe-18.2018.61.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Schneider, Neblyssa, Maura S. Milczewski, Valmir de Oliveira, Odilon Guariza Filho, Stephani C. P. S. Lopes, and Hypolito J. Kalinowski. "Cantilevers orthodontics forces measured by fiber sensors." In International Conference on Optical Fibre Sensors (OFS24), edited by Hypolito J. Kalinowski, José Luís Fabris, and Wojtek J. Bock. SPIE, 2015. http://dx.doi.org/10.1117/12.2196259.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Varkonyi-Koczy, A. R., B. Tusor, and E. Segatto. "Fuzzy logic supported 3D modeling based orthodontics." In 2017 IEEE International Symposium on Medical Measurements and Applications (MeMeA). IEEE, 2017. http://dx.doi.org/10.1109/memea.2017.7985868.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Yi, Yaxing, Zhongke Li, Suyuan Wei, Fanglin Deng, and Sen Yao. "Orthodontics: computer-aided diagnosis and treatment planning." In Optics and Optoelectronic Inspection and Control: Techniques, Applications, and Instruments, edited by Hong Liu and Qingming Luo. SPIE, 2000. http://dx.doi.org/10.1117/12.403952.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Savignano, Roberto, Sandro Barone, Alessandro Paoli, and Armando V. Razionale. "FEM Analysis of Bone-Ligaments-Tooth Models for Biomechanical Simulation of Individual Orthodontic Devices." In ASME 2014 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/detc2014-34912.

Full text
Abstract:
In the last decades, research in the orthodontic field has focused on the development of more comfortable and aesthetic appliances such as thermoformed aligners. Aligners have been used in orthodontics since the mid 20-century. Nonetheless, there is still not enough knowledge about how they interact with teeth. This paper is focused on the development of a Finite Element Method (FEM) model to be used in the optimization process of geometrical attributes of removable aligners. The presented method integrates Cone Beam Computed Tomography (CBCT) data and optical data in order to obtain a customized model of the dental structures, which include both crown and root shapes. The digital simulation has been focused on analyzing the behavior of three upper frontal teeth. Moreover, the analyses have been carried out by using different aligners’ thicknesses with the support of composite structures polymerized on teeth surfaces while simulating a 2 degrees rotation of an upper central incisor.
APA, Harvard, Vancouver, ISO, and other styles
9

Wang, Shu-Li, Shin-Lian Wang, and Fan Wu. "Decision Support System for Cephalometric Analyses of Orthodontics." In 2009 2nd International Conference on Biomedical Engineering and Informatics. IEEE, 2009. http://dx.doi.org/10.1109/bmei.2009.5302080.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Gu, Xiaoqi, Dong Li, Lihua Zhang, and Jing Guo. "Clinical analysis on orthodontics of adult and teenager." In 2011 International Conference on Human Health and Biomedical Engineering (HHBE). IEEE, 2011. http://dx.doi.org/10.1109/hhbe.2011.6028394.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Orthodontics Orthodontics"

1

Molina, Edith, Silvia Torrejón, Gerardo Mendoza, Rolando Vernal, and Emilio Cafferata. Supracrestal circumferential fibrotomy as a treatment strategy for recurrence in patients with orthodontics: a systematic review. INPLASY - International Platform of Registered Systematic Review and Meta-analysis Protocols, 2021. http://dx.doi.org/10.37766/inplasy2021.3.0044.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Savchenko, Olena. LASER TECHNOLOGIES IN ORTHODONTIC PRACTICE – ACHIEVEMENTS AND PROSPECTS. Intellectual Archive, 2019. http://dx.doi.org/10.32370/iaj.2141.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Guo, Runzhi. Alveolar bone changes in maxillary and mandibular anterior teeth during orthodontic treatment: A systematic review and meta-analysis. INPLASY - International Platform of Registered Systematic Review Protocols, 2020. http://dx.doi.org/10.37766/inplasy2020.4.0174.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Savchenko, Olena. ANALYSIS OF THE APPLICATION OF LASER RADIATION IN THE PROCESS OF ORTHODONTIC TOOTH MOVEMENT AND SUGGESTIONS ABOUT THE IMPROVEMENT OF TECHNOLOGY. Intellectual Archive, 2019. http://dx.doi.org/10.32370/iaj.2148.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Woolley, Julian, Oladapo Akintola, Julian Yates, Monica Calasans-Maia, Jose Calasans-Maia, and Roberto Sacco. The risk of osteonecrosis of the jaw (ONJ) and adverse outcomes in patients using antiresorptive drugs undergoing orthodontic treatment, A protocol for a systematic review. INPLASY - International Platform of Registered Systematic Review and Meta-analysis Protocols, 2020. http://dx.doi.org/10.37766/inplasy2020.7.0124.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Orthodontics Orthodontics' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography