Log in

Relevant bibliographies by topics / Outer diameter

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Outer diameter'

Author: Grafiati

Published: 28 May 2022

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Outer diameter.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Outer diameter"

1

Zhao, Min, Lin Zhang, and Bin Wu. "Study on the Dynamic Characteristics of the Large Diamond Circular Saw Blade." Advanced Materials Research 945-949 (June 2014): 781–84. http://dx.doi.org/10.4028/www.scientific.net/amr.945-949.781.

Full text

Abstract:

Large diamond circular saw blade is a plane with large diameters and thin thick, so there are serious vibration problems in the process of sawing stone under the high-speed. By using the force hammer producing incentive experiment method, the effect of the inner and outer diameters to the vibration modal and frequency of diamond circular saw blade are analyzed. Through comparing inner and outer diameter, it can be found that the inner diameter has greater influence on the natural frequency, while the outer diameter has greater influence on the amplitude. The result supplies reliable data for e

APA, Harvard, Vancouver, ISO, and other styles

2

Kishimoto, Takuma, Hayate Sakaguchi, Saki Suematsu, et al. "Deformation Behavior Causing Excessive Thinning of Outer Diameter of Micro Metal Tubes in Hollow Sinking." Metals 10, no. 10 (2020): 1315. http://dx.doi.org/10.3390/met10101315.

Full text

Abstract:

The deformation behavior of microtubes during hollow sinking was investigated to clarify the mechanism of the excessive thinning of their outer diameters. Stainless-steel, copper, and aluminum alloy tubes were drawn without an inner tool to evaluate the effect of Lankford values on outer diameter reduction. Drawing stress and stress-strain curves were obtained to evaluate the yielding behavior during hollow sinking. The observed yielding behavior indicated that the final outer diameter of the drawn tube was always smaller than the die diameter due to the uniaxial tensile deformation starting f

APA, Harvard, Vancouver, ISO, and other styles

3

Qu, Yongtao, Wenwen Yu, Nana Niu, Shaocen Liang, Guibao Li, and Guangzhe Piao. "Fullerene C60 Nanotubes Fabricated with Light Irradiation as a Critical Influence Factor." ISRN Condensed Matter Physics 2012 (September 26, 2012): 1–7. http://dx.doi.org/10.5402/2012/140842.

Full text

Abstract:

Crystalline fullerene C60 nanotubes were prepared simply via liquid-liquid interfacial precipitation using the mixture of C60-saturated pyridine and isopropyl alcohol. C60-saturated pyridine solution was exposed to visible light to promote the growth of fullerene C60 nanotubes. The average diameters of the fullerene particles in C60-pyridine colloid solution after irradiation were characterized by dynamic light scattering. After light irradiation, an outer separated layer of pyridine surrounds the fullerene particles because of the charge transfer complexes formation. The mean ratios of inner

APA, Harvard, Vancouver, ISO, and other styles

4

Wu, Jiehao, Qi Zong, and Ying Xu. "Experimental Study of the Dynamic Tensile Mechanical Properties of a Coal Sandstone Disc with a Central Hole." Advances in Civil Engineering 2020 (November 28, 2020): 1–9. http://dx.doi.org/10.1155/2020/8851575.

Full text

Abstract:

Deep mine rocks are often subjected to rock burst induced by dynamic load. The existence of initial holes will reduce the mechanical properties of rocks and affect the stability and safety of the tunnel excavating. In order to study the effect of the ratios of inner and outer diameter on disc specimen dynamic mechanical properties and failure modes, we use cylindrical sandstone specimens of Φ50 × 25 mm to process center holes of different diameters, and a series of dynamic splitting test were carried out with a system of split Hopkinson pressure bar (SHPB) with the diameter of Φ50 mm when the

APA, Harvard, Vancouver, ISO, and other styles

5

Villota, Isabella, Paulo C. Calvo, Oscar I. Campo, and Faruk Fonthal. "Microneedles: One-Plane Bevel-Tipped Fabrication by 3D-Printing Processes." Molecules 27, no. 19 (2022): 6634. http://dx.doi.org/10.3390/molecules27196634.

Full text

Abstract:

This article presents microneedles analyses where the design parameters studied included length and inner and outer diameter ranges. A mathematical model was also used to generalize outer and inner diameter ratios in the obtained ranges. Following this, the range of inner and outer diameters was completed by mechanical simulations, ranging from 30 μm to 134 μm as the inner diameter range and 208 μm to 250 μm as the outer diameter range. With these ranges, a mathematical model was made using fourth-order polynomial regressions with a correlation of 0.9993, ensuring a safety factor of four in wh

APA, Harvard, Vancouver, ISO, and other styles

6

Kizuka, Tokushi, Kun'ichi Miyazawa, and Takayuki Tokumine. "Young's Modulus of Single-Crystal Fullerene Nanotubes." Journal of Nanotechnology 2012 (2012): 1–5. http://dx.doi.org/10.1155/2012/969357.

Full text

Abstract:

We performed bending tests on single-crystal nanotubes composed of fullerene C70molecules byin situtransmission electron microscopy with measurements of loading forces by an optical deflection method. The nanotubes with the outer diameters of 270–470 nm were bent using simple-beam and cantilever-beam loading by the piezomanipulation of silicon nanotips. Young's modulus of the nanotubes increased from 61 GPa to 110 GPa as the outer diameter decreased from 470 nm to 270 nm. Young's modulus was estimated to be 66% of that of single-crystal C60nanotubes of the same outer diameter.

APA, Harvard, Vancouver, ISO, and other styles

7

Mitra, Manu. "Characteristics of Carbon Nanotube Relay." Scientific Journal of Research and Reviews 1, no. 4 (2019): 1–9. https://doi.org/10.5281/zenodo.2642490.

Full text

Abstract:

Relays are electromechanical switches which are normally used to control high power electrical machineries. It is very important part for a control a single circuit or multiple circuits either with a low power signal or high-power signals. In this paper Carbon nanotube Relay has been used with trench of gold as electrode material and characteristics of carbon nanotube relay such as histogram of outer diameters, histogram of inner diameters, histogram of lengths, pull in voltage vs outer diameter, pull back voltage vs outer diameter, pull in voltage vs length, pull back voltage vs length, pullb

APA, Harvard, Vancouver, ISO, and other styles

8

Liu, Kaichen, Junrui Chai, Yao Zhang, Ying Tian, and Ruiqing Li. "Study on Seepage Characteristics of Radial Flow in Rock Mass Based on Radius Effect." Geofluids 2022 (January 30, 2022): 1–18. http://dx.doi.org/10.1155/2022/5368690.

Full text

Abstract:

The radial fluid flow in fractures is affected by the size of the inner diameter and the position of the outer diameter, but the influence of the two factors on the flow velocity remains unclear. This study reveals the relationship through the coupled shear flow experiments and numerical simulations. Experimental results show that the fracture aperture is decreased by 0.175 mm under the unit effective stress, with the increase of 0.902 MPa in the shear stress. COMSOL is used to simulate the seepage of fractures under different inner and outer diameters. Simulation results show that the transit

APA, Harvard, Vancouver, ISO, and other styles

9

Akar, Mustafa Atakan, and Mehmet Kucuk. "Vortex shedding control on a bare cylinder using hexagonal perforated outer cylinder." Canadian Journal of Physics 95, no. 1 (2017): 69–84. http://dx.doi.org/10.1139/cjp-2016-0549.

Full text

Abstract:

The aim of the study is to observe the effect of outer hexagonal perforated cylinder surrounding an inner cylinder on vortex structure behind bluff body. Vortex shedding characteristics from bluff body are experimentally studied by particle image velocimetry (PIV) in deep water. The inner cylinder had seven different diameters (Di), varied from 30 to 90 mm with an increment of 10 mm and the hexagonally perforated outer cylinder placed outside of the inner cylinder was used as a control element. Experiments were carried out with six perforated cylinders with a diameters of 100 mm (Do) and six p

APA, Harvard, Vancouver, ISO, and other styles

10

Cho, Soonmo, Euntaek Lee, Seunggi Jo, Gyu Man Kim, and Woojin Kim. "Extrusion Characteristics of Thin Walled Tubes for Catheters Using Thermoplastic Elastomer." Polymers 12, no. 8 (2020): 1628. http://dx.doi.org/10.3390/polym12081628.

Full text

Abstract:

As the market for minimally invasive surgery has grown, the demand for high-precision and high-performance catheters has increased. Catheters for the diagnosis and treatment of cardiovascular or cerebrovascular disease mainly use a braided wire tube with a polymer inner liner and outer jacket to improve the pushability and trackability. The outer jacket should have an accurate inner and outer diameter and while maintaining a wall thickness of 150 µm or less. In this study, we designed and manufactured a tip and die capable of extruding an outer jacket with a wall thickness of 150 µm or less us

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Outer diameter"

1

Vanadia, David S. "Mapping the Outer Margin of the Serpent Mound Impact Structure to Assess the Outer Limit of Deformation: Adams, Highland, and Pike Counties, Ohio." Ohio University / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1503092648273144.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Сорін, В. Д. "Вихровий компресор для наддуву повітря в топку згорання на ТЕЦ". Master's thesis, Сумський державний університет, 2021. https://essuir.sumdu.edu.ua/handle/123456789/86615.

Full text

Abstract:

У роботі виконано розрахунок одноступеневого вихрового компресора та визначено діаметр робочого колеса. З метою зменшення габаритних розмірів виконано розрахунок двоступеневого вихрового компресора з різними діаметрами робочих коліс першого та другого ступенів. Виконано аналіз отриманих результатів та вибрано оптимальну конструкцію для пропонованих вихідних даних. У розділі охорони праці виконано аналіз шкідливих та небезпечних факторів при експлуатації вихрових компресорів та виконано розрахунок шумоглушника.<br>В работе выполнен расчет одноступенчатого вихревого компрессора и определен диаме

APA, Harvard, Vancouver, ISO, and other styles

3

Huang, Shu-Lin, and 黃叔林. "Study for Reducing Outer Diameter of 161kV XLPE Underground Cables." Thesis, 2003. http://ndltd.ncl.edu.tw/handle/fuppn4.

Full text

Abstract:

碩士<br>崑山科技大學<br>電機工程研究所<br>91<br>A procedure is studied for reducing outer diameter of 161kV XLPE. In Taiwan, XLPE (cross-linked polyethylene) cables are being used more widely as 161kV underground transmission lines owing to the superior electrical characteristics, quick installation and easy maintenance when compared to OF (oil-filled) cables. The transmission lines are divided into two categories, one is overhead lines, the other is underground lines. The underground transmission lines are laid out cater for metropolis of high density population because urban space is occupied by lots of bu

APA, Harvard, Vancouver, ISO, and other styles

4

Li, Chun-Ming, and 李俊明. "Development of a novel measuring system for measurement of the three-dimensional tip position and outer diameter of a micro-drill." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/745c2h.

Full text

Abstract:

碩士<br>國立虎尾科技大學<br>光電與材料科技研究所<br>96<br>In the study, a non-contact three-dimensional micro-drill tip position and outer diameter optical measuring system has been developed. The measurement system is only composed of a laser diode and a quadrant detector. The focused laser beam is projected on the quadrant detector. The measuring principle uses knife-edge scanning method and diffraction method to measure the energy distribution between the micro-drill position and the quadrant detector. Using the diffraction method, the resolutions of spatial coordinates of X- and Y-axial measurement are both e

APA, Harvard, Vancouver, ISO, and other styles

5

Martini, Nadia. "Räumliche und zeitliche Untersuchungen zum Teilungsapparat der äußeren Mitochondrienmembran mit hochauflösender Fluoreszenzmikroskopie." Doctoral thesis, 2004. http://hdl.handle.net/11858/00-1735-0000-0006-ADE6-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Outer diameter"

1

McDougall, Jason J., and Joel A. Vilensky. The innervation of the joint and its role in osteoarthritis pain. Oxford University Press, 2016. http://dx.doi.org/10.1093/med/9780199668847.003.0007.

Full text

Abstract:

Diarthrodial joints possess an extensive network of sensory and sympathetic nerve fibres whose physiological functions are varied and complex. Nerves are primarily located in the synovium but also innervate the subchondral bone, the outer third of menisci, and the superficial surface of tendons and ligaments. Large-diameter, myelinated neurons are involved in joint position sense while small-diameter neurons with thin or no myelin typically sense pain. The small-diameter nerves in conjunction with sympathetic fibres control synovial blood flow and maintain joint homeostasis. In patients with o

APA, Harvard, Vancouver, ISO, and other styles

2

Skiba, Grzegorz. Fizjologiczne, żywieniowe i genetyczne uwarunkowania właściwości kości rosnących świń. The Kielanowski Institute of Animal Physiology and Nutrition, Polish Academy of Sciences, 2020. http://dx.doi.org/10.22358/mono_gs_2020.

Full text

Abstract:

Bones are multifunctional passive organs of movement that supports soft tissue and directly attached muscles. They also protect internal organs and are a reserve of calcium, phosphorus and magnesium. Each bone is covered with periosteum, and the adjacent bone surfaces are covered by articular cartilage. Histologically, the bone is an organ composed of many different tissues. The main component is bone tissue (cortical and spongy) composed of a set of bone cells and intercellular substance (mineral and organic), it also contains fat, hematopoietic (bone marrow) and cartilaginous tissue. Bones a

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Outer diameter"

1

Corless, Joseph M. "A Minimum Diameter Limit for Retinal Rod Outer Segment Disks." In Cell and Developmental Biology of the Eye. Springer New York, 1986. http://dx.doi.org/10.1007/978-1-4612-4914-6_6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Yedidiah, Sam. "The Effects of Speed and Impeller Outer Diameter on Pump Performance." In Centrifugal Pump User’s Guidebook. Springer US, 1996. http://dx.doi.org/10.1007/978-1-4613-1217-8_25.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Hou, Dong-Xu, Xiao Liu, Liu-Jie Wang, et al. "Study on Axial Compressive Performance of Prefabricated FRP-Steel-Concrete Composite Column." In Novel Technology and Whole-Process Management in Prefabricated Building. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-5108-2_24.

Full text

Abstract:

AbstractThis paper adopts the method by combining the experimental research and theoretical analysis to study the axial compressive performance of prefabricated composite columns. The research is mainly focus on two type of composite column, called ISFTC and IFSTC, composed by FRP, steel tube and concrete. Finite element analysis was carried out to study the influence of inner and outer tubular diameter on the constraining effect. Based on the unified strength theory of double shear and experimental data collected from former literature, the bearing capacity of composite column and the section

APA, Harvard, Vancouver, ISO, and other styles

4

Cherepanov, Vasily, Evgeny Zubkov, Hubertus Junker, et al. "Ultra-Compact Multitip Scanning Probe Microscope with an Outer Diameter of 50 mm." In Advances in Atom and Single Molecule Machines. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-28172-3_2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Ruan, Minghua, Hang Luo, and Di Wu. "Study of the Construction Technique of Reinforced Bar Product on Large and Variable Section Pylon." In Novel Technology and Whole-Process Management in Prefabricated Building. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-5108-2_34.

Full text

Abstract:

AbstractWith the development of large span bridges, the height of the pylon is getting higher and higher, and the cross-sectional form of the pylon is getting more and more complicated, the construction of the pylon is a high-risk operation. The traditional pylon reinforcement construction uses manual asembling on the pylon, which is a labor-intensive high-altitude operation with high labor intensity, low construction efficiency, and not easy to guarantee quality. The pylon of Yanji Yangtze River Bridge is in the form of an octagonal outer cavity with a circular cross section, and the main rei

APA, Harvard, Vancouver, ISO, and other styles

6

Salvatori, Carlotta, Diego Trucco, Ignazio Niosi, Leonardo Ricotti, and Lorenzo Vannozzi. "A Novel Steerable Catheter Controlled with a Biohybrid Actuator: A Feasibility Study." In Biomimetic and Biohybrid Systems. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-39504-8_26.

Full text

Abstract:

AbstractTargeted therapies allow increasing the efficacy of treatments for several diseases, including cancer. The release of drugs or chemicals directly in the site of interest will be beneficial for maximizing the therapy and minimize side effects.Here, we report the concept and a preliminary analysis of an innovative intravascular steerable catheter guided by an on-board biohybrid actuator, aiming to release drugs into deep and tortuous regions within the cardiovascular systems. The catheter performance has been estimated through analytical and numerical analyses, varying catheter diameter,

APA, Harvard, Vancouver, ISO, and other styles

7

Li, Shenghua, Yuqi Wang, Qing Wang, Shuowei Bai, and Jiale Li. "Machine Vision-Based Measurement of Inner and Outer Diameter Parameters of Circular Saw Blades." In Proceedings of the UNIfied Conference of DAMAS, IncoME and TEPEN Conferences (UNIfied 2023). Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-49413-0_90.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Rana, Ajay Singh, Talwinder Singh Bedi, and Vishwas Grover. "A New Permanent Magnet Type Magnetorheological Finishing Tool for External Cylindrical Surfaces Having Different Outer Diameter." In Lecture Notes in Mechanical Engineering. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-5519-0_17.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Hiromoto, Kana, Yuta Naruse, Fumio Ito, Jun’ichi Watanabe, and Taro Nakamura. "Rotary Push-in Mechanism for Variable Outer Diameter PIGs with Multiple-Connected Using Pneumatic Artificial Muscles." In Lecture Notes in Networks and Systems. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-70722-3_11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Ramos-Grez, Jorge Andrés, Maximiliano López Norambuena, Ignacio Jeria Pérez, Domingo Gallardo Saavedra, and Matías González Aguilera. "Development of Powder Bed Laser 3D Printing in Polar Coordinates and Its Comparison with Conventional Cartesian Laser 3D Printing." In Proceedings of the XV Ibero-American Congress of Mechanical Engineering. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-38563-6_53.

Full text

Abstract:

AbstractPowder bed laser 3D printing performed using polar coordinates, called Spiral Growth Manufacturing (SGM), allows manufacturing axisymmetric revolution parts in less time compared to conventional cartesian laser printing or Selective Laser Melting (SLM). In this work, a device to perform SGM operating under polar coordinates is presented. The study considered the manufacture of rings by 3D laser printing, both polar (SGM) and cartesian (SLM), from AISI 316L steel powder. These were compared dimensionally and with regards to density and build rate efficiency of the process. The rings hav

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Outer diameter"

1

Hao, Yifei, Shuaizheng Yan, Zhengxing Wu, Bingwei He, Chenghua Li, and Junzhi Yu. "A Vision-Based Two-Stage Fruit Outer Diameter Detection Method." In 2024 IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE, 2024. https://doi.org/10.1109/robio64047.2024.10907381.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Yin, Zicheng, Xiaoyan Huang, Ang Liu, Xuanyuan Huang, Ye Ma, and Zhuo Chen. "The Evaluation of Optimal Ratio of Outer Diameter to Axial Length on Torque Density for the External Rotor PMSM." In 2024 International Conference on Electrical Machines (ICEM). IEEE, 2024. http://dx.doi.org/10.1109/icem60801.2024.10700195.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Koishi, Yudai, and Hiroki Goto. "Influence of Ratio of Outer Diameter and Axial Length on Torque density in Axial Wound Field Flux Switching Motor with Segmental Rotors." In 2024 27th International Conference on Electrical Machines and Systems (ICEMS). IEEE, 2024. https://doi.org/10.23919/icems60997.2024.10921040.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Halvorsen, Helge, Eirik Enerstvedt, and Øyvind Sundem. "Small Outer Diameter, Big Bore Permanent Straddle System." In SPE/ICoTA Coiled Tubing Conference and Exhibition. Society of Petroleum Engineers, 2004. http://dx.doi.org/10.2118/89659-ms.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Zhang, Yun, Zhixiang Li, and Xianyao Weng. "Measurement of the outer diameter of rotator in operation." In International Conference on Sensors and Control Techniques (ICSC2000), edited by Desheng Jiang and Anbo Wang. SPIE, 2000. http://dx.doi.org/10.1117/12.385599.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Sutaria, A., A. Jones, J. Medina, et al. "Association of Endotracheal Tube Outer Diameter With Reintubation Rates." In American Thoracic Society 2023 International Conference, May 19-24, 2023 - Washington, DC. American Thoracic Society, 2023. http://dx.doi.org/10.1164/ajrccm-conference.2023.207.1_meetingabstracts.a2878.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Pier, Bradley F., and Chetan P. Nikhare. "Outer Diameter to Thickness Ratio Effect on Tube Flaring Behavior." In ASME 2018 13th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/msec2018-6486.

Full text

Abstract:

Tube forming is one of the main manufacturing techniques for processing of tubular components. This process is subdivided depending on the processing i.e., tube end forming either to expand or reduce the section. One of these tube end forming techniques is a flaring process. Most applications for flaring tube ends, utilizes a conical tool for flaring the tube either till a particular deformation to achieve a desired shape or till failure to characterize the material properties. The relationship between the flaring behavior during the process based on the outer diameter and thickness of the tub

APA, Harvard, Vancouver, ISO, and other styles

8

Dong, Shuai, Xi-Qiang Ma, Wei Ma, Ji-Shun Li, and Yu-Jun Xue. "A New Method for Measuring Outer Diameter of Thin-Walled Bearing." In 2018 Chinese Automation Congress (CAC). IEEE, 2018. http://dx.doi.org/10.1109/cac.2018.8623110.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Saotome, Yasunori, Nozomu Toghashi, Yukiharu Shimizu, and Akihisa Inoue. "Development of a Micro Geared Motor with 0.9 mm Outer Diameter." In 9th International Conference on Multi-Material Micro Manufacture. Research Publishing Services, 2012. http://dx.doi.org/10.3850/978-981-07-3353-7_277.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Kotov, L., V. Temyanko, M. Bubnov, et al. "45 micron outer diameter Yb-doped fiber for efficient 976 nm lasers." In 2020 International Conference Laser Optics (ICLO). IEEE, 2020. http://dx.doi.org/10.1109/iclo48556.2020.9285898.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Outer diameter"

1

Vollaro, Mary B. Development of Laser Beam Delivery and Welding Head for the Inner and Outer Diameter Joints of the AGT 1500 Recuperator. Defense Technical Information Center, 1986. http://dx.doi.org/10.21236/ada225446.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Tao, Gang, and Brian Wagg. PR-244-16704-R01 Casing Corrosion Logging Tool Test. Pipeline Research Council International, Inc. (PRCI), 2019. http://dx.doi.org/10.55274/r0011626.

Full text

Abstract:

Pipeline Research Council International, Inc. (PRCI) contracted C-FER Technologies (1999) Inc. ("C-FER") to conduct a laboratory testing program to evaluate the performance of various casing corrosion logging techniques and tools. An additional objective of this test program was to evaluate the influence of the wellhead and outer casing strings on the response of magnetic flux leakage tools, and to evaluate the thru-tubing logging technique. A test well was set up with a string of 4.5 inch diameter tubing joints (~150 ft total length) hanging concentrically inside a string of 7 inch diameter c

APA, Harvard, Vancouver, ISO, and other styles

3

Boyle, Maxwell. Terrestrial vegetation monitoring at Cape Lookout National Seashore: 2022 data summary. National Park Service, 2024. http://dx.doi.org/10.36967/2303636.

Full text

Abstract:

Parks within the Southeast Coast Network (SECN) host a diverse assemblage of plants and terrestrial vegetation communities. Vegetation communities are dynamic entities whose species composition, abundance, distribution, and structure are influenced by environmental factors and impacted over time by natural and anthropogenic disturbances. Determining trends in vegetation communities over time and identifying plant stressors is vital to understanding the ecological health of terrestrial ecosystems within SECN parks. Like most barrier islands along the southeastern coast, the vegetation communiti

APA, Harvard, Vancouver, ISO, and other styles

4

Granot, David, Scott Holaday, and Randy D. Allen. Enhancing Cotton Fiber Elongation and Cellulose Synthesis by Manipulating Fructokinase Activity. United States Department of Agriculture, 2008. http://dx.doi.org/10.32747/2008.7613878.bard.

Full text

Abstract:

a. Objectives (a) Identification and characterization of the cotton fiber FRKs; (b) Generating transgenic cotton plants overproducing either substrate inhibited tomato FRK or tomato FRK without substrate inhibition; (c) Generating transgenic cotton plants with RNAi suppression of fiber expressed FRKs; (d) Generating Arabidopsis plants that over express FRK1, FRK2, or both genes, as additional means to assess the contribution of FRK to cellulose synthesis and biomass production. b. Background to the topic: Cellulose synthesis and fiber elongation are dependent on sugar metabolism. Previous resu

APA, Harvard, Vancouver, ISO, and other styles

5

STUDY ON THE ULTIMATE SHEAR PERFORMANCE OF CONCRET- FILLED STEEL TUBULAR COMPOSITE COLUMNS. The Hong Kong Institute of Steel Construction, 2024. http://dx.doi.org/10.18057/ijasc.2024.20.3.3.

Full text

Abstract:

The shear performance of three concrete-filled steel tubular (CFST) composite columns was investigated via single-point shear tests, considering shear-span ratios of 0.75, 1, and 1.5. The findings indicated that the failure mode of the CFST composite column transitioned from oblique compression shear failure to localized shear failure in the joint areas as shear-span ratio decreased. An extended analysis of the parameters was carried out utilizing the ABAQUS finite element model. The analysis indicates that the ultimate shear resistance capability of steel-concrete composite columns increases

APA, Harvard, Vancouver, ISO, and other styles

6

DISTRIBUTION OF RESIDUAL STRESS IN THE SPHERE-PIPE CONNECTION WELDS OF WELDED HOLLOW SPHERICAL JOINTS. The Hong Kong Institute of Steel Construction, 2023. http://dx.doi.org/10.18057/ijasc.2023.19.3.7.

Full text

Abstract:

Welded hollow spherical joint is widely used in large-span spatial structures due to its simple structure, clear mechanical behavior and convenient connection. However, a large number of sphere-pipe connection welds at the joints will inevitably produce complex welding residual stress, which will have adverse effects on the stiffness of the joints and the overall safety of the structure. Focusing on the sphere-pipe connection welds on the hollow spherical joints, this paper keeps track of the whole process of sphere-pipe welding, analyzes and summarizes the distribution law and specific distri

APA, Harvard, Vancouver, ISO, and other styles

7

FINITE ELEMENT SIMULATION FOR ULTRA-HIGH-PERFORMANCE CONCRETE-FILLED DOUBLE-SKIN TUBES EXPOSED TO FIRE. The Hong Kong Institute of Steel Construction, 2022. http://dx.doi.org/10.18057/icass2020.p.263.

Full text

Abstract:

Ultra-high-performance concrete (UHPC) or ultra-high-strength concrete (UHSC) are alternatively used to reduce construction materials, thereby achieving more sustainable constructions. Moreover, engaging the advantages of concrete cores and outer steel tubes in concrete-filled steel tubes (CFST) or ductile concrete-filled double-skin tubes (CFDST) is of great interest for the better performance of such members under fire. Nevertheless, current design provisions do not provide design models for UHPC-filled double-skin tubes under fire, and existing finite-element (FE) methodologies available in

APA, Harvard, Vancouver, ISO, and other styles

8

STABILITY PERFORMANCE AND WIND TUNNEL TEST OF STEEL HYPERBOLIC COOLING TOWER CONSIDERING SKINNED EFFECT. The Hong Kong Institute of Steel Construction, 2023. http://dx.doi.org/10.18057/ijasc.2023.19.3.10.

Full text

Abstract:

With the development of industry, cooling towers play a very important role in thermal power generation, and steel cooling towers are being used more widely. The surface of cooling towers is covered with profiled panels, and the skinned effect on the mechanical performance and stability of the structure should be considered. At present, most studies on steel cooling towers have not considered the skinned effect. In steel cooling towers, the skin panels are usually connected to members by self-tapping screws., the shearing test of self-tapping screw connection is carried out considering differe

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!