Relevant bibliographies by topics / Overlapping joint

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Overlapping joint'

Author: Grafiati
Published: 4 June 2021
Last updated: 11 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Overlapping joint.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Overlapping joint"

1

Lin, Minghong, Li Zhang, Adam Wierman, and Jian Tan. "Joint optimization of overlapping phases in MapReduce." Performance Evaluation 70, no. 10 (October 2013): 720–35. http://dx.doi.org/10.1016/j.peva.2013.08.013.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Lin, Minghong, Li Zhang, Adam Wierman, and Jian Tan. "Joint optimization of overlapping phases in MapReduce." ACM SIGMETRICS Performance Evaluation Review 41, no. 3 (January 10, 2014): 16–18. http://dx.doi.org/10.1145/2567529.2567534.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Takashima, Yasuhito, Tomo Washio, and Fumiyoshi Minami. "Evaluation of Tensile Shear Strength for Lap Joint of Dissimilar Steels." Materials Science Forum 1016 (January 2021): 1454–59. http://dx.doi.org/10.4028/www.scientific.net/msf.1016.1454.

Full text
Abstract:
The influence of different thickness combinations was investigated on the strength of the lap joint of dissimilar steels. In this study, lap joints of dissimilar steels were welded by laser welding. The tensile shear test was conducted for the lap joints. Rotational deformation process around the weld bead of the lap joint was observed by a digital video camera during the test. Motion analysis from the video of the tensile shear test indicated that the rotation angle around the weld bead was reduced by overlapping higher strength grade steel. Three-dimensional elastic-plastic finite element analysis was performed for the tensile shear test of the lap joint. The numerically calculated deformation behavior of the lap joint subjected to tensile shear loading showed reasonable agreement with the experimental record. It was found that the rotation angle was reduced and tensile shear strength of the lap joint increase by overlapping higher strength grade steel sheet.
APA, Harvard, Vancouver, ISO, and other styles
4

Wetzel, Johannes, Astrid Laubenheimer, and Michael Heizmann. "Joint Probabilistic People Detection in Overlapping Depth Images." IEEE Access 8 (2020): 28349–59. http://dx.doi.org/10.1109/access.2020.2972055.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Chen, Tie-yun, and Wei-min Chen. "The Stress Analysis and Experimental Research of Tubular K-Joints With Overlap." Journal of Offshore Mechanics and Arctic Engineering 109, no. 4 (November 1, 1987): 375–80. http://dx.doi.org/10.1115/1.3257034.

Full text
Abstract:
The geometry of overlapping tubular joints, the equations of intersection curves and the coordinate of the intersection point are introduced first. The variational method for simple tubular joints is extended to the stress analysis of tubular K-joints with overlap. The computer program is compiled. The stress concentration factor and the position of the hot spot of an overlapping joint are found. For the sake of proving the feasibility of our analysis and program, the computed results are compared with experimental data of our photoelastic experiment and other experiments.
APA, Harvard, Vancouver, ISO, and other styles
6

Liu, Xige, Wancheng Zhu, Qinglei Yu, Shijiang Chen, and Kai Guan. "Estimating the Joint Roughness Coefficient of Rock Joints from Translational Overlapping Statistical Parameters." Rock Mechanics and Rock Engineering 52, no. 3 (November 7, 2018): 753–69. http://dx.doi.org/10.1007/s00603-018-1643-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Liem, Martijn C., and Dariu M. Gavrila. "Joint multi-person detection and tracking from overlapping cameras." Computer Vision and Image Understanding 128 (November 2014): 36–50. http://dx.doi.org/10.1016/j.cviu.2014.06.003.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Dhir, Anish, and Ciaran M. Lee. "Integrating Overlapping Datasets Using Bivariate Causal Discovery." Proceedings of the AAAI Conference on Artificial Intelligence 34, no. 04 (April 3, 2020): 3781–90. http://dx.doi.org/10.1609/aaai.v34i04.5789.

Full text
Abstract:
Causal knowledge is vital for effective reasoning in science, as causal relations, unlike correlations, allow one to reason about the outcomes of interventions. Algorithms that can discover causal relations from observational data are based on the assumption that all variables have been jointly measured in a single dataset. In many cases this assumption fails. Previous approaches to overcoming this shortcoming devised algorithms that returned all joint causal structures consistent with the conditional independence information contained in each individual dataset. But, as conditional independence tests only determine causal structure up to Markov equivalence, the number of consistent joint structures returned by these approaches can be quite large. The last decade has seen the development of elegant algorithms for discovering causal relations beyond conditional independence, which can distinguish among Markov equivalent structures. In this work we adapt and extend these so-called bivariate causal discovery algorithms to the problem of learning consistent causal structures from multiple datasets with overlapping variables belonging to the same generating process, providing a sound and complete algorithm that outperforms previous approaches on synthetic and real data.
APA, Harvard, Vancouver, ISO, and other styles
9

Knopp, T., K. Them, M. Kaul, and N. Gdaniec. "Joint reconstruction of non-overlapping magnetic particle imaging focus-field data." Physics in Medicine and Biology 60, no. 8 (March 24, 2015): L15—L21. http://dx.doi.org/10.1088/0031-9155/60/8/l15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Valencia, Mark J., and Masahiro Miyoshi. "Southeast asian seas: Joint development of hydrocarbons in overlapping claim areas?" Ocean Development & International Law 16, no. 3 (January 1986): 211–54. http://dx.doi.org/10.1080/00908328609545791.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Overlapping joint"

1

Blackman, Donna K. "Axial structure of fast spreading mid-ocean ridges : implications for overlapping spreading centers." Thesis, Massachusetts Institute of Technology, 1986. http://hdl.handle.net/1721.1/55308.

Full text
Abstract:
Thesis (M.S.)--Joint Program in Oceanography (Massachusetts Institute of Technology, Dept. of Earth, Atmospheric, and Planetary Sciences; and the Woods Hole Oceanographic Institution), 1986.
Includes bibliographical references (leaves 88-91).
by Donna Kay Blackman.
M.S.
APA, Harvard, Vancouver, ISO, and other styles
2

Vasconcelos, Thiago Delfino Lima. "Estudo numérico do comportamento de emendas de barras por meio de laço em juntas de estruturas de concreto armado." Universidade de São Paulo, 2017. http://www.teses.usp.br/teses/disponiveis/18/18134/tde-30032017-104346/.

Full text
Abstract:
O surgimento de juntas é inevitável em certas construções em concreto armado e para garantir que a estrutura trabalhe de forma monolítica, deve-se proporcionar uma adequada transferência de esforços entre os elementos, para isso, faz-se necessário dispor de uma emenda adequada entre os elementos. Emendas com barras retas ocupam muito espaço devido ao comprimento de traspasse necessário, dessa forma, em situações em que há uma limitação de espaço para a emenda, uma armação que constitui uma boa solução é a emenda por meio de laço, que, apesar de ter poucos estudos relacionados, vem sendo bastante difundida na construção civil. O objetivo desse trabalho é estudar o comportamento de emendas em laço em juntas de estruturas de concreto armado submetidas à tração. Para isso, realizam-se simulações numéricas no software DIANA® em modelos numéricos 3D. Inicialmente, fez-se a calibração do modelo numérico com base em ensaios experimentais da literatura, depois foi realizada uma análise paramétrica variando parâmetros geométricos das peças e da armação em laço. Os resultados mostraram que traspasses menores que o diâmetro de dobra dos laços e espaçamentos maiores que 100 mm se mostram insuficientes para a formação de bielas de compressão entre laços. Dessa forma, ao se utilizar emendas em laço em juntas de concreto armado, recomenda-se dispor as barras o mais próximo possível até um espaçamento máximo de 60 mm entre eixos, como também um traspasse mínimo igual ao diâmetro de dobra dos laços.
The appearance of joints is inevitable in certain constructions of reinforced concrete and aiming to guarantee that the structure works monolithically, it is important to provide an appropriate transfer of stresses between elements, for that, it is necessary using a proper overlapping between them. Straight bars overlappings take up too much space due to the required overlapping length, therefore, in limited space situations, a reinforcement that represents a good solution is the loop joint, which has spread a lot in civil construction, although there are very few studies about it. The aim of the present work is to study the loop joint behaviour in reinforced concrete structures under tension. In order to do so, numerical simulations with numerical 3D models are made using the software DIANA®. Initially, it was made the calibration of the numerical model based on experimental tests of the literature, after that, parametric analyses were performed, varying geometric parameters of the elements and of the loop reinforcement. The results showed that overlapping lengths smaller than the loop diameter and distances between loops axes greater than 100 mm are not sufficient for the development of compression struts between loops. Thus, when the loop joint in reinforced concrete structures is used, it is recommended that the bars are placed as near as possible until a distance between the loops axes of 60 mm and a minimum overlapping length equal to the loop diameter of the reinforcement.
APA, Harvard, Vancouver, ISO, and other styles
3

Constantinou, Marios, and Michael Gehde. "Infrared Welding of Continuous Glass Fiber-Reinforced Thermoplastics – Approaches to use the Fibers in the Joint." Technische Universität Chemnitz, 2018. https://monarch.qucosa.de/id/qucosa%3A21293.

Full text
Abstract:
Thermoplastic prepregs that are also known as organo sheets are processed in presses and formed to half shells. Larger components can be produced by joining the half shells, which results in hollow bodies. However, current manufacturing technologies allow only cap profile shaped joints, which cause fiber deflections in the joint plane. This paper shows that overlapping infrared welds in organo sheets enable weld strengths close to the interlaminar shear strengths of the unwelded materials and thus a fiber utilization across the joint plane. By using high welding pressures, a matrix depletion and a change of the fiber alignment in the weld plane may occur which causes low weld strengths. Therefore, criteria for the successful welding were defined and various possibilities to optimize the weld strengths were investigated.
APA, Harvard, Vancouver, ISO, and other styles
4

Constantinou, Marios, and Michael Gehde. "Manufacturing Hollow Bodies made of Continuous Glassfiber-reinforced Thermoplastics by Infrared Welding." Technische Universität Chemnitz, 2018. https://monarch.qucosa.de/id/qucosa%3A21287.

Full text
Abstract:
Thermoplastic prepregs that are also known as organo sheets are processed in presses and formed to half shells. Larger components can be produced by joining the half shells, which results in hollow bodies. However, current manufacturing technologies allow only cap profile shaped joints, which cause fiber deflections in the joint plane. This presentation shows that overlapping infrared welds in organo sheets enable weld strengths close to the interlaminar shear strengths of the unwelded materials and thus a fiber utilization across the joint plane. By using high welding pressures, a matrix depletion and a change of the fiber alignment in the weld plane may occur which causes low weld strengths. Therefore possibilbites to optimize the weld strengths are shown and one possible process variants for the manufacturing of hollow bodies by infrared welding is introduced.
APA, Harvard, Vancouver, ISO, and other styles
5

Porteous, Alexander. "The structural behaviour of timber joints made with fully overlapping nails." Thesis, Edinburgh Napier University, 2003. http://researchrepository.napier.ac.uk/Output/2787.

Full text
Abstract:
An integrated programme of experimental and analytical work was carried out to evaluate the nonlinear semi-rigid characteristics of timber connections using fully overlapping nails subjected to short duration lateral loading and moment. The investigation is part of a continuing programme of research at Napier University into the behaviour of timberjoints using fully overlapping nails as the connecting Z -1 mechanism. The effects of the factors and material properties that influence the behaviour of nailed joints were addressed in a structured and controlled way allowing semi-empirical models to be developed for the lateral load behaviour of rnulti-nailed timber joints using steel and plywood gusset plates. A quality control procedure was established for the testing programme and consistent standards were applied to the preparation and testing work. The semi-empirical models that were developed included for the effect of timber density: crussept late material effect- nail strength; number of nails: nail diameter; row spacing and the effect of the moisture content in the timber. They covered joints assembled with and without a gap between the timber and the gusset plates and for joints assembled with steel gusset plates, the effect of the predrill size used in the gusset plate was also investigated. The model results compared very well with the results from tests, accurately predicting the non-linear behaviour of the joints up to failure. An extensive analytical and experimental study was carried out to investigate the moment-rotation behaviour of these types ofjoints. Two linear arýd four non-linear models were developed for each type of joint and the efficiencies of the models were compared to detennine the one that best simulated the joint behaviour. The linear models consistently underestimated the capacity of the joint, giving conservative results. The best solutions were obtained by applying the torsion formula used for steel connections and incorporating the nail behaviour models developed for the non-linear lateral load joints. Account was taken of the non-linear behaviour of the connection and alternative models using fixed and moveable centres of rotation were developed. Very good comparisons were achieved between these models and the test results. A detailed comparison was made between the behaviour of the joints using the lateral load displacement models and Eurocode 5 (EC5) and it was concluded that EC5 rules did not accurately simulate the behaviour of this type of joint. It was concluded that the nail spacing rules in the code did not apply to fully overlapping nails. A limit state design method based on the principles used in EC5 has been developed from the models for the design of joints using fully overlapping nails and subjected to lateral loading or moment. The semi-rigid behaviour of the joints was also investigated and it was concluded that to safely predict the response of structures assembled with fully, overlapping nails. the semi-rigid behaviour must be included for in the analysis procedure. Rigidity factors, end fixing moment reduction factors and the secant rotational stiffness coefficients for the joints were derived. It was also shown that where the analysis was limited to the serviceability limit state. a modified elastic method of analysis could be used and where it was beyond this state a non-linear method of analysis was required.
APA, Harvard, Vancouver, ISO, and other styles
6

Constantinou, Marios, and Michael Gehde. "Infrared welding of continuous fibre-reinforced thermoplastics – Investigations on overlapping joints." Universitätsbibliothek Chemnitz, 2017. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-226689.

Full text
Abstract:
Continuous fibre-reinforced thermoplastics often are offered as impregnated and consolidated semi-finished products which are known as organic sheets. The thermoplastic matrix leads to several advantages including the thermoformability and weldability. Parts made of organic sheets are frequently produced by forming the semi-finished product into half-shells and stiffening those shells in the course of the process e.g. by the injection moulding of ribs. Larger and more complex parts with hollow body structures can be manufactured e.g. by forming the semi-finished products into half-shells and joining the half-shells. However, the currently available manufacturing technologies for parts made of organic sheets have cap profile shaped joints which prevent the use of the reinforcing fibres across the joint plane. Investigations have proven that overlapping weld joints in organic sheets show much higher strengths than cap profile shaped joints which can be explained by the fibre use across the joint plane. Furthermore, the infrared welding technology was verified as an appropriate process for the welding of organic sheets since no need for additional welding material is given, short heating times can be realized and no contact of the infrared emitters to the joining parts is required. Therefore, the present study shall reveal the high potential of the overlapping welding of organic sheets. Influences on the weld strengths of infrared welded organic sheets are described and potential improvements concerning the materials to be welded as well as the welding process are shown.
APA, Harvard, Vancouver, ISO, and other styles
7

Constantinou, Marios, and Michael Gehde. "Überlappendes Infrarotschweißen von Organoblechen zur Herstellung von Hohlkörperbauteilen – Verbindungseigenschaften und mögliche Verfahrensvarianten." Universitätsbibliothek Chemnitz, 2017. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-231121.

Full text
Abstract:
Endlosfaserverstärkte Thermoplaste werden oftmals als imprägnierte und konsolidierte Halbzeuge angeboten. Solche thermoplastischen Prepregs werden üblicherweise als Organobleche bezeichnet. Die thermoplastische Matrix ermöglicht unter anderem die Warmformbarkeit und Schweißbarkeit von Organoblechen. Organobleche sind, durch die ausschließliche Möglichkeit sie mittels Thermoformen umzuformen, in ihrer Formgebung auf halbschalige Strukturen beschränkt, welche begrenzte Torsions-, Verwindungs- und Beulsteifigkeiten aufweisen. Um die Steifigkeiten dieser schalenförmigen, offenen Bauteile zu erhöhen, können z. B. versteifende Rippen oder Verstärkungssegmente eingebracht werden. Aufgrund des Thermoformprozesses sind mit Organoblechen, verglichen mit duroplastischen Systemen, jedoch nur kleine und einfache Bauteilgeometrien realisierbar. Um neben der Steifigkeitserhöhung auch größere und komplexere Bauteile herzustellen, können die schalenförmigen Organobleche während des Umformvorgangs gefügt werden. Auf diese Weise werden Hohlkörper in Doppelhutprofilform gefertigt. So werden, auch ohne Einbringung von Rippen o. ä., hohe Bauteilsteifigkeiten erreicht. Die Doppelhutprofilform hat jedoch eine nicht optimale Nutzung der Faserverstärkung über die Fügeebene hinweg zur Folge, da die Fasern von der Belastungsrichtung abweichend umgelenkt werden. Im vorliegenden Beitrag wird daher das überlappende Infrarotschweißen von Organoblechen behandelt, was eine Faserverstärkung über die Fügeebene hinweg ermöglicht. Die Prozess- und Werkstoffeinflüsse auf die Verbindungseigenschaften werden beschrieben und Möglichkeiten zur Optimierung der Schweißnahteigenschaften dargestellt. Des Weiteren werden Optimierungskriterien für überlappende Infrarotschweißungen an den untersuchten Organoblechen festgelegt. Die im Verlauf der Forschungsarbeiten umzusetzenden Verfahrensvarianten zur Herstellung von Hohlkörperbauteilen aus Organblechen werden zudem vorgestellt.
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Overlapping joint"

1

Ludwig, Kirk. Status Functions as Agentive Functions. Oxford University Press, 2017. http://dx.doi.org/10.1093/oso/9780198789994.003.0008.

Full text
Abstract:
Chapter 8 begins the analysis of status functions by locating them within the broader category of agentive functions. It starts with a taxonomy of agentive functions that relies on the different bases on which we attribute them and places them in relation to the overlapping category of artefacts. Then it identifies status functions as a subcategory and analyzes them as arising from the need for agents to coordinate on, or collectively accept, the same things as filling roles in joint activities defined by constitutive rules. It distinguishes between status functions attached to types and to tokens. Finally, it considers the status of counterfeits, how we understand activities into which they are introduced, and what to say when an agent intends to introduce a counterfeit but mistakenly uses the real thing.
APA, Harvard, Vancouver, ISO, and other styles
2

Burgos-Vargas, Ruben, and Shirley M. L. Tse. Juvenile-onset spondyloarthritis. Oxford University Press, 2016. http://dx.doi.org/10.1093/med/9780198734444.003.0015.

Full text
Abstract:
Juvenile-onset spondyloarthritis (JoSpA) refers to the group of HLA-B27-associated paediatric rheumatic diseases that involves the synovium and entheses of peripheral joints in the initial years and, in some patients, the sacroiliac and spinal joints several years later. Patients with JoSpA may also have extra-articular manifestations, including anterior uveitis, psoriasis and inflammatory bowel disease (IBD), and this represents a disease continuum with adult-onset SpA. JoSpA might include patients with enthesitis-related arthritis (ERA) and PsA categories of juvenile idiopathic arthritis (JIA), according to the International League of Associations for Rheumatology (ILAR). The opposite does not occur, since ILAR JIA classification does not allow the possibility of clinical overlapping among the different categories, one of the most important features of SpA.
APA, Harvard, Vancouver, ISO, and other styles
3

Rogler, Gerhard. Gastrointestinal system. Oxford University Press, 2013. http://dx.doi.org/10.1093/med/9780199642489.003.0021.

Full text
Abstract:
Rheumatic diseases and diseases of the gastrointestinal (GI) tract are connected in two ways. The extraintestinal manifestations of inflammatory GI diseases such as inflammatory bowel disease affect joints in up to one-third of patients. On the other hand, several rheumatic diseases such as vasculitis or systemic lupus erythematosus (SLE) induce a wide spectrum of gastrointestinal manifestations. The GI tract constitutes a huge area in contact with the environment. It is exposed to billions of food antigens, commensal bacteria, and potential pathogens. Some of those antigens are thought to play a role in the pathogenesis of rheumatic diseases. The intestinal barrier function and the gut immune system are tightly regulated, as on one hand tolerance for food antigens and the resident commensal flora needs to be maintained, and on the other hand pathogens need to be rapidly and effectively eliminated. Non-infectious, chronic inflammatory diseases of the small and large intestine with rheumatic manifestations have been well known for decades. Among the susceptibility genes for Crohn's disease and ulcerative colitis are some that also cause susceptibility to rheumatoid arthritis or SLE, indicating a shared susceptibility and overlapping pathological mechanisms. Subsequently, similar therapeutic principles have successfully been applied in autoimmune GI and rheumatological diseases such as steroids, immunosuppressants, and anti-TNF (tumour necrosis factor) antibodies.
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Overlapping joint"

1

Becker-Weinberg, Vasco. "Joint Development Agreements in Areas of Overlapping Claims: Legal Regime." In Joint Development of Hydrocarbon Deposits in the Law of the Sea, 93–140. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-662-43570-0_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Becker-Weinberg, Vasco. "Joint Development Agreements in Areas of Overlapping Claims: State Practice." In Joint Development of Hydrocarbon Deposits in the Law of the Sea, 141–65. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-662-43570-0_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Chen, Hao, Xianchao Zhang, Wenxin Liang, and Feng Ding. "Manifold Regularized Symmetric Joint Link Model for Overlapping Community Detection." In Lecture Notes in Computer Science, 53–65. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-25660-3_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Rotili, Rudy, Emanuele Principi, Stefano Squartini, and Francesco Piazza. "Real-Time Joint Blind Speech Separation and Dereverberation in Presence of Overlapping Speakers." In Advances in Neural Networks – ISNN 2011, 437–46. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-21090-7_52.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Luo, Yuchen, Zhenjie Huang, Kai Zheng, and Tianyong Hao. "Systematic Analysis of Joint Entity and Relation Extraction Models in Identifying Overlapping Relations." In Neural Computing for Advanced Applications, 17–31. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-5188-5_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Hamdan, Safarina Haslimawaty, Anwar Zainal Abidin, and Zakiah Ahmad. "Tensile and Interlaminar Shear Strength of Unidirectional Kenaf Fibre Reinforced Polymer with Overlapping Joint." In InCIEC 2013, 689–700. Singapore: Springer Singapore, 2014. http://dx.doi.org/10.1007/978-981-4585-02-6_59.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Azevedo, Leonardo Guerreiro, Geraldo Zimbrão, Jano Moreira de Souza, and Ralf Hartmut Güting. "Estimating the Overlapping Area of Polygon Join." In Advances in Spatial and Temporal Databases, 91–108. Berlin, Heidelberg: Springer Berlin Heidelberg, 2005. http://dx.doi.org/10.1007/11535331_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

"4003 overlapping joint [n]." In Encyclopedic Dictionary of Landscape and Urban Planning, 657. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-540-76435-9_8980.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kindler, Stefan, and Marike Bredow-Zeden. "Considering Depression and Anxiety as Risk Factors for Temporomandibular Joint Disorder." In Overlapping Pain and Psychiatric Syndromes, edited by Martin D. Cheatle, Simmie L. Foster, and Nicole K. Y. Tang, 152–59. Oxford University Press, 2020. http://dx.doi.org/10.1093/med/9780190248253.003.0011.

Full text
Abstract:
Temporomandibular joint disorder (TMD) is a painful functional disorder of the temporomandibular joint, masticatory muscles, and associated musculoskeletal structures of the head and neck. TMD is a type of chronic pain and is widely used as a model for chronic pain. The etiology of TMD pain is multifactorial. Biological, behavioral, environmental, social, emotional, and cognitive factors can contribute to TMD. TMD can manifest with musculoskeletal facial pain complaints and with different forms of jaw dysfunction. Biobehavioral studies suggest an association between TMD pain and coexisting psychopathology, including depression and anxiety. This chapter presents practical clinical recommendations on how to treat patients with symptoms of depression, anxiety, and TMD pain. The authors underline the importance of considering depression and anxiety as risk factors for TMD.
APA, Harvard, Vancouver, ISO, and other styles
10

Balachandran, Jyoti Gulati. "Networks of Community Formation." In Narrative Pasts, 129–63. Oxford University Press, 2020. http://dx.doi.org/10.1093/oso/9780190123994.003.0005.

Full text
Abstract:
By the time of Mughal presence in Gujarat, the textual inscription of the personal and social networks of Sufis and other learned men in texts like Miṣbāḥ al-‘Ālam and Ṣaḥā’if al-sādāt intersected with an identity that was clearly regional and specific to Gujarat. In the seventeenth century, these networks were organized in texts in overlapping and contrasting ways: long chains of spiritual initiation and practice (silsilahs); distinct familial genealogies (silsilat al-naṣab), families (khānwādas), and tribes (qabīlas). This chapter demonstrates that the textual organization of Suhrawardi networks, in particular, was influential in communicating that the joint enterprise of state, community and region formation had been pre-determined: the Suhrawardi Sufis were pre-ordained to inspire and sanctify the entire region of Gujarat with the message of Islam and Sufism. Such historiographical interventions, representing the second narrative moment, were in turn a testimony to the successful expansion of the Suhrawardi lineage in Gujarat.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Overlapping joint"

1

Atyabi, Adham, Sean Fitzgibbon, and David M. W. Powers. "Biasing the overlapping and non-overlapping sub-windows of EEG recording." In 2012 International Joint Conference on Neural Networks (IJCNN 2012 - Brisbane). IEEE, 2012. http://dx.doi.org/10.1109/ijcnn.2012.6252465.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Lin, Chao-Feng, and Shan-Li Hu. "Multi-task overlapping coalition parallel formation algorithm." In the 6th international joint conference. New York, New York, USA: ACM Press, 2007. http://dx.doi.org/10.1145/1329125.1329380.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Iacob, Ionut E., and Alex Dekhtyar. "Processing XML documents with overlapping hierarchies." In the 5th ACM/IEEE-CS joint conference. New York, New York, USA: ACM Press, 2005. http://dx.doi.org/10.1145/1065385.1065513.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Maniadakis, Michail, Manolis Hourdakis, and Panos Trahanias. "Modeling Overlapping Execution/Observation Brain Pathways." In 2007 International Joint Conference on Neural Networks. IEEE, 2007. http://dx.doi.org/10.1109/ijcnn.2007.4371138.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Mamakos, Michail, and Georgios Chalkiadakis. "Probability Bounds for Overlapping Coalition Formation." In Twenty-Sixth International Joint Conference on Artificial Intelligence. California: International Joint Conferences on Artificial Intelligence Organization, 2017. http://dx.doi.org/10.24963/ijcai.2017/47.

Full text
Abstract:
In this work, we provide novel methods which benefit from obtained probability bounds for assessing the ability of teams of agents to accomplish coalitional tasks. To this end, our first method is based on an improvement of the Paley-Zygmund inequality, while the second and the third ones are devised based on manipulations of the two-sided Chebyshev’s inequality and the Hoeffding’s inequality, respectively. Agents have no knowledge of the amount of resources others possess; and hold private Bayesian beliefs regarding the potential resource investment of every other agent. Our methods allow agents to demand that certain confidence levels are reached, regarding the resource contributions of the various coalitions. In order to tackle real-world scenarios, we allow agents to form overlapping coalitions, so that one can simultaneously be part of a number of coalitions. We thus present a protocol for iterated overlapping coalition formation (OCF), through which agents can complete tasks that grant them utility. Agents lie on a social network and their distance affects their likelihood of cooperation towards the completion of a task. We confirm our methods’ effectiveness by testing them on both a random graph of 300 nodes and a real-world social network of 4039 nodes.
APA, Harvard, Vancouver, ISO, and other styles
6

Bestak, R., and M. Sedlacek. "Overlapping cells in femtocell environment." In 2013 6th Joint IFIP Wireless and Mobile Networking Conference (WMNC 2013). IEEE, 2013. http://dx.doi.org/10.1109/wmnc.2013.6549011.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kumatani, Kenichi, Rita Singh, Friedrich Faubel, John McDonough, and Youssef Oualil. "Joint constrained maximum likelihood regression for overlapping speech recognition." In ICASSP 2013 - 2013 IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP). IEEE, 2013. http://dx.doi.org/10.1109/icassp.2013.6637621.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zheng, Huanyang, Ziqi Wan, and Jie Wu. "Optimizing MapReduce Framework through Joint Scheduling of Overlapping Phases." In 2016 25th International Conference on Computer Communication and Networks (ICCCN). IEEE, 2016. http://dx.doi.org/10.1109/icccn.2016.7568555.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bronzi, Mirko, Valter Crescenzi, Paolo Merialdo, and Paolo Papotti. "Wrapper Generation for Overlapping Web Sources." In 2011 IEEE/WIC/ACM International Joint Conferences on Web Intelligence (WI) and Intelligent Agent Technologies (IAT). IEEE, 2011. http://dx.doi.org/10.1109/wi-iat.2011.160.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Silva, Thiago C., and Liang Zhao. "Detecting overlapping structures via network-based competitive learning." In 2012 International Joint Conference on Neural Networks (IJCNN 2012 - Brisbane). IEEE, 2012. http://dx.doi.org/10.1109/ijcnn.2012.6252787.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Overlapping joint' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography