To see the other types of publications on this topic, follow the link: Oxirane Content.

Journal articles on the topic 'Oxirane Content'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Oxirane Content.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Perez-Arce, Jonatan, Ander Centeno-Pedrazo, Jalel Labidi, Jose R. Ochoa-Gomez, and Eduardo J. Garcia-Suarez. "Lignin-Based Polyols with Controlled Microstructure by Cationic Ring Opening Polymerization." Polymers 13, no. 4 (2021): 651. http://dx.doi.org/10.3390/polym13040651.

Full text
Abstract:
Lignin-based polyols (LBPs) with controlled microstructure were obtained by cationic ring opening polymerization (CROP) of oxiranes in an organosolv lignin (OL) tetrahydrofuran (THF) solution. The control on the microstructure and consequently on the properties of the LBPs such as hydroxyl number, average molecular weight, melting, crystallization and decomposition temperatures, are crucial to determine the performance and application of the derived-products. The influence of key parameters, for example, molar ratio between the oxirane and the hydroxyl groups content in OLO, initial OL concent
APA, Harvard, Vancouver, ISO, and other styles
2

Musik, Marlena, Eugeniusz Milchert, and Kornelia Malarczyk-Matusiak. "Technological Parameters of Epoxidation of Sesame Oil with Performic Acid." Polish Journal of Chemical Technology 20, no. 3 (2018): 53–59. http://dx.doi.org/10.2478/pjct-2018-0038.

Full text
Abstract:
Abstract The course of epoxidation of sesame oil (SO) with performic acid formed „in situ” by the reaction of 30 wt% hydrogen peroxide and formic acid in the presence of sulfuric acid(VI) as a catalyst was studied. The most advantageous of the technological independent parameters of epoxidation are as follows: temperature 80°C, H2O2/ C=C 3.5:1, HCOOH/C=C 0.8:1, amount of catalyst as H2SO4/(H2O2+HCOOH) 1 wt%, stirring speed at least 700 rpm, reaction time 6 h. The iodine number (IN), epoxy number (EN), a relative conversion to oxirane (RCO) and oxirane oxygen content (EOe) were determined every
APA, Harvard, Vancouver, ISO, and other styles
3

Jalil, Mohd Jumain, Noorfazlida Mohamed, Siti Khatijah Jamaludin, Ayub M. Som, and Ahmad Rafizan Mohamad Daud. "Epoxidation of Palm Kernel Oil-Based Crude Oleic Acid." Advanced Materials Research 906 (April 2014): 125–30. http://dx.doi.org/10.4028/www.scientific.net/amr.906.125.

Full text
Abstract:
Most vegetable oils have high content of unsaturated bond and can be converted into epoxidized fatty acids. These days, epoxidized vegetable oils are great concern as they are obtained from sustainable, renewable natural resources and are environmental friendly. The epoxidation of palm oleic acid was carried out by using in situ generated performic acid (HCOOOH) to produce epoxidized oleic acid. The degree of temperature, the molar ratio of formic acid or hydrogen peroxide and types of catalyst was considered. Epoxidation results were based on complete conversion oxirane, rate of epoxidation a
APA, Harvard, Vancouver, ISO, and other styles
4

Bakhtin, S.G., and A.V. Charyarov. "SPECTROPHOTOMETRIC DETERMINATION OF THE CONCENTRATION AND NUCLEOPHILICITY OF QUATERNARY AMMONIUM AND PHOSPHONIUM SALTS BASED ON THE REACTION OF NUCLEOPHILIC OPENING OF THE EPOXIDE RING." Bulletin of Donetsk National University. Series А. Natural Sciences, no. 4 (December 3, 2024): 26–32. https://doi.org/10.5281/zenodo.14276568.

Full text
Abstract:
A new spectrophotometric method for determining the content of tetraalkylammonium or phosphonium salts is proposed, based on the chromogenic S<sub>N</sub>2 reaction of oxirane ring opening in the systems "epoxide &ndash; salt R<sub>4</sub>N<sup>+</sup><strong>X</strong><sup>&ndash;</sup> or R<sub>4</sub>P<sup>+</sup><strong>X</strong><sup>&ndash;</sup> &ndash; proton donor reagent". Formal kinetic patterns of the epoxide ring opening reaction in the proposed systems are investigated. <strong><em>Keywords:</em></strong><strong> </strong>tetraalkylammonium, tetraalkylphosphonium, oxirane, epoxid
APA, Harvard, Vancouver, ISO, and other styles
5

Neswati, N. Nazir, S. Arief, and Yusniwati. "Combination of temperature and time of oxirane rings opening reaction for producing palm oil polyol as raw material of flexible polyurethane foam." IOP Conference Series: Earth and Environmental Science 1059, no. 1 (2022): 012077. http://dx.doi.org/10.1088/1755-1315/1059/1/012077.

Full text
Abstract:
Abstract Flexible polyurethane foams can be synthesized using polyols having a hydroxyl value of less than 100 mg KOH/g. The value of the hydroxyl value is affected by the temperature and time of the oxirane rings opening reaction. The purpose of this study was to examine the combination of temperature and time of the best oxirane rings opening reaction to produce polyols with a hydroxyl value of less than 100 mg KOH/g. Epoxidized palm oil was treated with temperature (50°C, 60°C, 70°C, and 80°C) and time (1 hour, 2 hours, 3 hours, and 4 hours). Parameters observed were hydroxyl value, hydroxy
APA, Harvard, Vancouver, ISO, and other styles
6

Derawi, Darfizzi, and Jumat Salimon. "Optimization on Epoxidation of Palm Olein by Using Performic Acid." E-Journal of Chemistry 7, no. 4 (2010): 1440–48. http://dx.doi.org/10.1155/2010/384948.

Full text
Abstract:
The epoxidation process of palm olein (POo) was carried out by usingin situgenerated performic acid (HCOOOH) to produce epoxidized palm olein (EPO). HCOOOH was produced by mixing of formic acid (HCOOH) as oxygen carrier and hydrogen peroxide (H2O2) as oxygen donor in various ratio of POo: HCOOH: H2O2. The effect of HCOOH and H2O2concentration, temperature, stirring effect and reaction time were studied. The presence of oxirane ring of EPO was characterised by fourier transformation infra-red (FTIR), proton and carbon nuclear magnetic resonance (1H-NMR and (13C-NMR) spectra. The results showed
APA, Harvard, Vancouver, ISO, and other styles
7

Thuy, Nguyen Thi, Nguyen Thanh Liem, and Vu Minh Duc. "Epoxidation of soybean oil by using Na2WO4/H2O2/H3PO4 based catalyst." Vietnam Journal of Chemistry 60, no. 3 (2022): 398–406. http://dx.doi.org/10.1002/vjch.202100216.

Full text
Abstract:
AbstractThis paper presents epoxidation using a Na2WO4/H2O2/H3PO4‐based complex catalyst, which is formed from in aqueous phase in situ during the process. The success of the epoxidation was demonstrated by the FTIR investigation results. A variety of factors such as reaction conditions, reactant and composition of catalyst system that influence the epoxidation reaction was examined through the oxirane content, yield, conversion, and catalyst selectivity. In which, the rate of addition of reactants as well as the catalytic complex is one of the influencing factors studied. The optimal ratio of
APA, Harvard, Vancouver, ISO, and other styles
8

Hambali, R. A., M. A. Faiza, and A. Zuliahani. "Non-Isocyanate Polyurethane (NIPU) based on Rubber Seed Oil Synthesized via Low-Pressured Carbonization Reaction." Sains Malaysiana 50, no. 8 (2021): 2407–17. http://dx.doi.org/10.17576/jsm-2021-5008-22.

Full text
Abstract:
Epoxidised rubber seed oil (ERSO) was successfully synthesized into non-isocyanate polyurethane via carboxylation method whereas peroxoformic acid was formed by in-situ reaction for epoxidation. The effects of temperature and ratio of hydrogen peroxide and formic acid to rubber seed oil carboxylation were studied. The optimum temperature for the epoxidation reaction was found at 50 °C to avoid ring opening reaction of epoxy whilst the optimum ratio of hydrogen peroxide and formic acid is equal molar of double bond: formic acid at 1:2 and 1:1, respectively. At a lower concentration of hydrogen
APA, Harvard, Vancouver, ISO, and other styles
9

Silva, Juliana, Aline Faria, Geraldo Oliveira, and Fernando Lage. "ANÁLISE COMPARATIVA ENTRE COMPÓSITOS REFORÇADOS COM BAGAÇO DE CANA-DE-AÇÚCAR PRODUZIDOS A PARTIR DE ÓLEO DE SOJA EPOXIDADO COMERCIAL E ÓLEO DE SOJA PROVENIENTE DE FRITURAS." LUMEN ET VIRTUS 15, no. 43 (2024): 9245–57. https://doi.org/10.56238/levv15n43-117.

Full text
Abstract:
Commercial epoxy is produced from petroleum derivatives and is widely used as a matrix in the production of composites due to its simple processing. Epoxidized soybean oil makes it possible to produce a more sustainable matrix. With a view to sustainability, the present work aims to produce composite materials produced from commercial epoxidized soybean oil and epoxidized residual frying soybean oil. The characterization of the epoxidized oils was carried out by determining the oxirane oxygen content (OOe), infrared spectroscopy by Fourier transform and tensile test. As epoxidized soybean oils
APA, Harvard, Vancouver, ISO, and other styles
10

Yenni Listiana, Hilde Rosa Tampubolon, and Mersi Suriani Sinaga. "PENGARUH KONSENTRASI KATALIS DAN WAKTU REAKSI PADA PEMBUATAN EPOKSI MINYAK GORENG BEKAS." Jurnal Teknik Kimia USU 6, no. 3 (2017): 28–33. http://dx.doi.org/10.32734/jtk.v6i3.1586.

Full text
Abstract:
Epoxy is produced from an epoxidation of vegetable oil or natural oil with au nsaturated bond. Epoxy can be applied as a stabilizer, plasticizers in polyvinyl chloride (PVC) and can be used as an antioxidant in natural rubber processing, as a surfactant, anti-corrosive additive agent in lubricants and pesticide raw materials. The purpose of this research was to evaluate epoxy production from waste cooking oil. In this research, waste cooking oil was reacted with hexane as solvent, sulfuric acid as catalyst, glacial acetic acid and hydrogen peroxide. The catalyst concentration was varied from 1
APA, Harvard, Vancouver, ISO, and other styles
11

Beltrán Osuna, Ángela Aurora, and Luis Alejandro Boyacá Mendivelso. "Two-phase kinetic model for epoxidation of soybean oil." Ingeniería e Investigación 30, no. 2 (2010): 188–96. http://dx.doi.org/10.15446/ing.investig.v30n2.15749.

Full text
Abstract:
A two-phase kinetic model was implemented for analysing conventional epoxidation, using a percarboxylic acid generated in situ through adding hydrogen peroxide in a two-phase system having a homogeneous catalyst. Data was adjusted using the least square method (0.88 correlation coefficient). The simulation closely predicted oxirane oxygen content values, especially during the first stage of reaction and deviation at the end of epoxidation due, possibly, to different degradation reactions.
APA, Harvard, Vancouver, ISO, and other styles
12

Aniket, E. Kale, Goswami Disha, S. Zade Preeti, and B. Mandake Manoj. "Recent Advances in Epoxidation of Vegetable oils." International Journal of Emerging Technologies and Innovative Research Volume 4 Issue 4, Volume 4 Issue 4 (2017): 171–75. https://doi.org/10.5281/zenodo.579681.

Full text
Abstract:
Vegetable oils are among the most promising renewable raw materials because of their ready availability, inherent biodegradability, and their many versatile applications. Vegetable oils are the fats and lipids containing triglyceride molecules. Due to the increase in environmental issues like waste disposal problems, non-biodegradable resources, greenhouse effect, etc. and the reduction of petroleum oil resources, renewable oils from vegetable origin have become an important issue. The lubricants from renewable resources are a successful reality in many parts of the world. Vegetable oils have
APA, Harvard, Vancouver, ISO, and other styles
13

Hilton, James L., and Parthasarathy Pillai. "Thioproline Protection of Crops Against Herbicide Toxicity." Weed Technology 2, no. 1 (1988): 72–76. http://dx.doi.org/10.1017/s0890037x00030128.

Full text
Abstract:
Thioproline (L-thiazolidine-4-carboxylic acid) partially protects sorghum [Sorghum bicolor(L.) Moench. ‘DK 42Y’] seedlings against the herbicides tridiphane [2-(3,5-dichlorophenyl)-2-(2,2,2-trichloroethyl)oxirane] and alachlor [2-chloro-N-(2,6-diethylphenyl)-N-(methoxymethyl)acetamide] in controlled environment chambers. Thioproline alone inhibits plant growth at concentrations above 10−5M. Its phytotoxicity is intermediate between the two herbicide antidotes OTC (L-2-oxothiazolidine-4-carboxylic acid) and flurazole [phenylmethyl 2-chloro-4-(trifluoromethyl)-5-thiazolecarboxylate]. The two thi
APA, Harvard, Vancouver, ISO, and other styles
14

ANDILA, PUTRI SRI, I. PUTU AGUS HENDRA, PUTRI KESUMA WARDANI, I. GEDE TIRTA, SUTOMO SUTOMO, and DEDEN FARDENAN. "The phytochemistry of Cymbopogon winterianus essential oil from Lombok Island, Indonesia and its antifungal activity against phytopathogenic fungi." Nusantara Bioscience 10, no. 4 (2018): 232–39. http://dx.doi.org/10.13057/nusbiosci/n100406.

Full text
Abstract:
Andila PS, Hendra IPA, Wardani PK, Tirta IG, Sutomo, Fardenan D. 2018. The phytochemistry of Cymbopogon winterianus essential oil from Lombok Island, Indonesia and its antifungal activity against phytopathogenic fungi. Nusantara Bioscience 10: 232-239. Cymbopogon winterianus Jowitt ex Bor [Sereh Wangi] is a plant producing essential oil that has been extensively used in perfumery, mosquito repellent, medicinal, and cosmetic industry. In Indonesia, the accession of C. winterianus plant had been collected from natural forest in Sembalun, Lombok, West Nusa Tenggara (NTB) Province. However, the ph
APA, Harvard, Vancouver, ISO, and other styles
15

Zhang, Fengyan, Yonglu Dong, Shudong Lin, Xuefeng Gui, and Jiwen Hu. "Optimization of production process of epoxidized soybean oil with high oxygen content through response surface methodology." Polish Journal of Chemical Technology 25, no. 2 (2023): 21–29. http://dx.doi.org/10.2478/pjct-2023-0013.

Full text
Abstract:
Abstract The epoxidation process of soybean oil (SBO) and peracid produced by 50 wt% hydrogen peroxide (H2O2) and formic acid (FA) was studied with sulfuric acid (H2SO4) as a catalyst. Three reaction parameters, including reaction temperature, FA-to-SBO ratio, and H2O2-to-SBO ratio, were investigated, along with the combined effect on oxirane value (OV). Based on response surface methodology (RSM), the Box-Behnken design (BBD) was used to optimize the process parameters. According to the results, the calculated OV (7.34%) and the experimental OV (7.31%) were signifi cantly in agreement. The pr
APA, Harvard, Vancouver, ISO, and other styles
16

Salih, Nadia, and Jumat Salimon. "Optimization of High Yield Epoxidation of Malaysian Castor Bean Ricinoleic Acid with Performic Acid." Indonesian Journal of Chemistry 22, no. 1 (2022): 609. http://dx.doi.org/10.22146/ijc.68592.

Full text
Abstract:
Epoxidized castor oil (ECO) has shown high potential for industrial applications as value-added products such as polymer coating, plasticizer, and biolubricant. Epoxidized ricinoleic acid recovered from ECO has potential for industrial usage. In this work, epoxidized ricinoleic acid (ERA) was synthesized through in situ generated performic acid epoxidation of ricinoleic acid (RA). The epoxidation process was optimized by several reaction parameters, such as the molar ratio of formic acid to ethylenic unsaturation, the molar ratio of hydrogen peroxide to ethylenic unsaturation, and reaction tem
APA, Harvard, Vancouver, ISO, and other styles
17

Nwosu, Obieogu, Felix Aguele, and Linus Chiemenem. "Synthesis of acrylated epoxidized biobased resin from groundnut seed oil." Poljoprivredna tehnika 46, no. 4 (2021): 49–57. http://dx.doi.org/10.5937/poljteh2104049n.

Full text
Abstract:
In this study, groundnut seed oil was epoxidized in situ using hydrogen peroxide (30%) and formic and acetic acid. The reaction conditions were monitored at a temperature of 70oC, stirring speed of 750 rpm and time of 6 hours. After epoxidation, a further modification was done using acrylic acid in the presence of hydroquinone at a temperature of 120oC. Comparatively, peroxyformic acid performed more effectively than the peroxyacetic acid during epoxidation with an iodine value (26.4 gl/100g oil) and oxirane content(3.27%). FTIR analysis of the raw, epoxidized, and acrylated groundnut seed oil
APA, Harvard, Vancouver, ISO, and other styles
18

Okieimen, F. E., T. O. Egbuchunam, and D. Balköse. "The effect of bio-based plasticizer on the permanence and water vapor transport properties of PVC plastigels." Chemical Industry and Chemical Engineering Quarterly 14, no. 1 (2008): 11–15. http://dx.doi.org/10.2298/ciceq0801011o.

Full text
Abstract:
Novel formulations of PVC plastisols based on blends of bio-based and synthetic plasticizers were prepared and characterized. A traditional phthalate plasticizer, dioctylphthalate, was replaced in the plastisols studied by the epoxidized rubber seed oil (4.5 % oxirane content). The plastisols formed were processed into plastigels and characterized in terms of permanence properties using leaching and migration tests and water vapour barrier properties. It was found that the permanence properties of PVC/DOP plastigels were maintained in the presence of up to 50 % ERSO, and that blending with DOP
APA, Harvard, Vancouver, ISO, and other styles
19

Perez-Nakai, Aina, Alejandro Lerma-Canto, Ivan Dominguez-Candela, Jose Miguel Ferri, and Vicent Fombuena. "Novel Epoxidized Brazil Nut Oil as a Promising Plasticizing Agent for PLA." Polymers 15, no. 9 (2023): 1997. http://dx.doi.org/10.3390/polym15091997.

Full text
Abstract:
This work evaluates for the first time the potential of an environmentally friendly plasticizer derived from epoxidized Brazil nut oil (EBNO) for biopolymers, such as poly(lactic acid) (PLA). EBNO was used due to its high epoxy content, reaching an oxirane oxygen content of 4.22% after 8 h of epoxidation for a peroxide/oil ratio of 2:1. Melt extrusion was used to plasticize PLA formulations with different EBNO contents in the range of 0–10 phr. The effects of different amounts of EBNO in the PLA matrix were studied by performing mechanical, thermal, thermomechanical, and morphological characte
APA, Harvard, Vancouver, ISO, and other styles
20

Dominguez-Candela, Ivan, Alejandro Lerma-Canto, Salvador Cayetano Cardona, Jaime Lora, and Vicent Fombuena. "Physicochemical Characterization of Novel Epoxidized Vegetable Oil from Chia Seed Oil." Materials 15, no. 9 (2022): 3250. http://dx.doi.org/10.3390/ma15093250.

Full text
Abstract:
In this study, a novel epoxidized vegetable oil (EVO) from chia seed oil (CSO) has been obtained, with the aim to be employed in a great variety of green products related to the polymeric industry, as plasticizers and compatibilizers. Previous to the epoxidation process characterization, the fatty acid (FA) composition of CSO was analyzed using gas chromatography (GC). Epoxidation of CSO has been performed using peracetic acid formed in situ with hydrogen peroxide and acetic acid, applying sulfuric acid as catalyst. The effects of key parameters as temperature (60, 70, and 75 °C), the molar ra
APA, Harvard, Vancouver, ISO, and other styles
21

Peng, Yuan Huai, and Hua Di Lin. "Preparation of Environment-Friendly Epoxidized Corn Oil as a Plasticizer." Advanced Materials Research 852 (January 2014): 256–61. http://dx.doi.org/10.4028/www.scientific.net/amr.852.256.

Full text
Abstract:
An environment-friendly plasticizer, epoxidized corn oil was prepared by the epoxidation of corn oil with peroxyacetic acid which was generated in situ from hydrogen peroxide and glacial acetic using acidic ion exchange resin modified by zinc chloride as catalyst. The product with an epoxy oxygen content of 6.40 w% and a percent conversion to oxirane of 87.67 % was obtained under the following optimized conditions: 15 % modified ion exchange resin feed relative to the weight of corn oil, the molar ratio of 1.7 to 1 with hydrogen peroxide to double bonds, 18% acetic acid feed relative to the we
APA, Harvard, Vancouver, ISO, and other styles
22

Siti Munira, Yahaya, Ahmad Faiza Mohd, and Mohamed Rahmah. "Synthesis and Characterization of Palm Oil Based Polyol." Advanced Materials Research 812 (September 2013): 275–80. http://dx.doi.org/10.4028/www.scientific.net/amr.812.275.

Full text
Abstract:
In this study, palm oil-based polyols were prepared and characterized. In order to prepare the polyol, Epoxidized palm oil (EPO) was reacted with glycerol and undergoes ring opening reaction. The synthesized oil was characterized by oxygen oxirane content titration (OOC), hydroxyl value test (HV), fourier transform infrared (FTIR) and nuclear magnetic resonance (NMR). Based on the FTIR spectrum of polyols, the disappearance of epoxy groups at 825cm-1, 843cm-1 and the emergence of hydroxyl group at 3394cm-1 are obvious indicating that hydroxyl group of the polyols formed. In NMR, the presence o
APA, Harvard, Vancouver, ISO, and other styles
23

Dong, Lina, Wenying Zhou, Xuezhen Sui, et al. "Thermal, mechanical, and dielectric properties of epoxy resin modified using carboxyl-terminated polybutadiene liquid rubber." Journal of Elastomers & Plastics 49, no. 4 (2016): 281–97. http://dx.doi.org/10.1177/0095244316653261.

Full text
Abstract:
Epoxy (Ep) resin modified with carboxyl-terminated polybutadiene (CTPB) liquid rubber was investigated in this study. Fourier transform infrared verified the chemical reactions between oxirane ring of Ep and carboxyl groups of CTPB using benzyldimethylamine as a catalyst. The decrease of the thermal stability could be due to the lower thermal stability of CTPB compared with that of pure Ep. The mechanical results showed that CTPB-modified Ep was superior to that of the pure Ep, and the best overall mechanical properties were normally achieved with 20 phr of CTPB content. The impact strength of
APA, Harvard, Vancouver, ISO, and other styles
24

Hilton, James L., and Parthasarathy Pillai. "L-2-Oxothiazolidine-4-Carboxylic Acid Protection Against Tridiphane Toxicity." Weed Science 34, no. 5 (1986): 669–75. http://dx.doi.org/10.1017/s0043174500067667.

Full text
Abstract:
Tridiphane [2-(3,5-dichlorophenyl)-2-(2,2,2-trichloroethyl)oxirane] inhibited growth of seedling corn (Zea maysL. ‘DK T 1100’), wheat (Triticum aesetivumL. ‘Arthur’), and sorghum (Sorghum vulgarePers. ‘DK 42Y’) in growth chamber experiments. These inhibitions were partially circumvented by simultaneous treatment with OTC (L-2-oxothiazolidine-4-carboxylic acid). Tridiphane, atrazine [6-chloro-N-ethyl-N′-(1-methylethyl)-1,3,5-triazine-2,4-diamine], and OTC each increased levels of low molecular weight thiols (glutathione) in intact roots of treated corn seedlings, but only OTC did in excised roo
APA, Harvard, Vancouver, ISO, and other styles
25

Alamri, M. S., A. A. Mohamed, S. Hussain, M. A. Ibraheem, and Akram A. Abdo Qasem. "Determination of Moisture Sorption Isotherm of Crosslinked Millet Flour and Oxirane Using GAB and BET." Journal of Chemistry 2018 (December 11, 2018): 1–8. http://dx.doi.org/10.1155/2018/2369762.

Full text
Abstract:
Epoxy resin was prepared by crosslinking epoxidized oil and millet flour. The reaction was carried out at three different temperatures (25, 40, and 55°C) and zinc chloride levels (1, 2, and 3%). Moisture sorption isotherms were determined at 0.1 to 0.9 water activity (aw) using a gravimetric sorption analyzer (Q 2000). The sigmoidal shape (type II) of the resin isotherms exhibited lower equilibrium moisture content (EMC) at higher temperature. The experimental data were modeled using GAB (Guggenheim–Anderson–de Boer) and BET (Brunauer–Emmett–Teller). The EMC of the resin was significantly lowe
APA, Harvard, Vancouver, ISO, and other styles
26

., Meenu, Tarun Virmani, Lubhan Singh, and Rahul Kaushik. "Phytochemical Screening, GC-MS Analysis and Total Phenolic Content Determination of Bioactive Compound of Propolis." INTERNATIONAL JOURNAL OF DRUG DELIVERY TECHNOLOGY 13, no. 03 (2023): 884–93. http://dx.doi.org/10.25258/ijddt.13.3.18.

Full text
Abstract:
India is a hub for a large variety of natural products that have proven their therapeutic efficacy in various ailments and disorders. Despite it, a lot of natural products are yet to be explored, and Indian propolis is one of them. Indian propolis is a waxy natural product obtained from beehives. In this research, phytochemical constituents present in Indian propolis were qualitatively analyzed using phytochemical screening, gas chromatography-mass spectroscopy (GC-MS), and quantitatively using total phenolic content. Phytochemical screening results revealed the presence of total phenolic cont
APA, Harvard, Vancouver, ISO, and other styles
27

Kirpluks, Mikelis, Edgars Vanags, Arnis Abolins, Slawomir Michalowski, Anda Fridrihsone, and Ugis Cabulis. "High Functionality Bio-Polyols from Tall Oil and Rigid Polyurethane Foams Formulated Solely Using Bio-Polyols." Materials 13, no. 8 (2020): 1985. http://dx.doi.org/10.3390/ma13081985.

Full text
Abstract:
High-quality rigid polyurethane (PU) foam thermal insulation material has been developed solely using bio-polyols synthesized from second-generation bio-based feedstock. High functionality bio-polyols were synthesized from cellulose production side stream—tall oil fatty acids by oxirane ring-opening as well as esterification reactions with different polyfunctional alcohols, such as diethylene glycol, trimethylolpropane, triethanolamine, and diethanolamine. Four different high functionality bio-polyols were combined with bio-polyol obtained from tall oil esterification with triethanolamine to d
APA, Harvard, Vancouver, ISO, and other styles
28

Prociak, Aleksander, Michał Kucała, Maria Kurańska, and Mateusz Barczewski. "Effect of Selected Bio-Components on the Cell Structure and Properties of Rigid Polyurethane Foams." Polymers 15, no. 18 (2023): 3660. http://dx.doi.org/10.3390/polym15183660.

Full text
Abstract:
New rigid polyurethane foams (RPURFs) modified with two types of bio-polyols based on rapeseed oil were elaborated and characterized. The effect of the bio-polyols with different functionality, synthesized by the epoxidation and oxirane ring-opening method, on the cell structure and selected properties of modified foams was evaluated. As oxirane ring-opening agents, 1-hexanol and 1.6-hexanediol were used to obtain bio-polyols with different functionality and hydroxyl numbers. Bio-polyols in different ratios were used to modify the polyurethane (PUR) composition, replacing 40 wt.% petrochemical
APA, Harvard, Vancouver, ISO, and other styles
29

Tosto, Claudio, Lorena Saitta, Alberta Latteri, and Gianluca Cicala. "Epoxy-Based Blend Formulation for Dual Curing in Liquid Crystal Display 3D Printing: A Study on Thermomechanical Properties Variation for Enhanced Printability." Polymers 16, no. 3 (2024): 358. http://dx.doi.org/10.3390/polym16030358.

Full text
Abstract:
The aim of this study was to explore the thermal properties of epoxy–acrylate blends for the liquid crystal display (LCD) 3D printing technique. Starting from an epoxy–acrylate blend with a ratio of epoxy to acrylate of 50:50, the effect of adding a reactive monofunctional epoxy diluent was evaluated. The diluent was a resin composed by oxirane, mono[(C12-14 alkyl) methyl] derivatives selected for its low viscosity (i.e., 1.8 Poise) at room temperature and its reactivity. The diluent content varied from 15 to 25 wt% and, for all the formulation, double curing cycles, where thermal curing follo
APA, Harvard, Vancouver, ISO, and other styles
30

Lubguban, Arnold A., Zuleica R. Lozada, Yuan-Chan Tu, Hongyu Fan, Fu-Hung Hsieh, and Galen J. Suppes. "Isocyanate Reduction by Epoxide Substitution of Alcohols for Polyurethane Bioelastomer Synthesis." International Journal of Polymer Science 2011 (2011): 1–8. http://dx.doi.org/10.1155/2011/936973.

Full text
Abstract:
A phosphate ester-forming reaction was carried out by mixing epoxidized soybean oil with up to 1.5%o-phosphoric acid.In situoligomerization took effect almost instantly producing a clear, homogeneous, highly viscous, and a low-acid product with a high average functionality. The resulting epoxide was used as a reactant for urethane bioelastomer synthesis and evaluated for rigid foam formulation. Results have shown that with a number of catalysts tested phosphoric acid significantly enhances a solvent-free oxirane ring cleavage and polymerization of the epoxidized soybean oil via phosphate-ester
APA, Harvard, Vancouver, ISO, and other styles
31

Nor, Nurazira Mohd, Nadia Salih, and Jumat Salimon. "Optimization of the Ring Opening of Epoxidized Palm Oil using D-Optimal Design." Asian Journal of Chemistry 33, no. 1 (2020): 67–75. http://dx.doi.org/10.14233/ajchem.2021.22938.

Full text
Abstract:
In the presence of a catalyst, p-toluenesulfonic acid (PTSA), the ring of epoxidized palm oil (EPO) was opened using oleic acid (OA). The optimization effects of different process variables including the mol ratio of EPO/OA, reaction temperature, PTSA percentage and reaction time was performed by response surface methodology (RSM). To assess the effects of process variables and interactions among them, a D-optimal design was used as an RSM tool to acquire the maximum response value. The following are the optimum conditions achieved at the reaction time of 4.73 h in the RSM study: 1.02% PTSA, 3
APA, Harvard, Vancouver, ISO, and other styles
32

Kirpluks, Mikelis, Ugis Cabulis, Maria Kurańska, and Aleksander Prociak. "Three Different Approaches for Polyol Synthesis from Rapeseed Oil." Key Engineering Materials 559 (June 2013): 69–74. http://dx.doi.org/10.4028/www.scientific.net/kem.559.69.

Full text
Abstract:
Three different kinds of polyols from rapeseed oil were synthesised and characterized during this study. Afterwards, using these polyols rigid polyurethane foams were produced, which are used as thermal insulation material in construction industry and in production of refrigerators. Polyols from rapeseed oil were synthesised by epoxidation, transamidization and transesterification methods. One rapeseed oil based polyol was synthesized by partial epoxidation of the double bonds in fatty acid chains and overall opening oxirane rings by using diethylene glycol. Other two methods transamidization
APA, Harvard, Vancouver, ISO, and other styles
33

Liu, Qi Mei, Dang Quan Zhang, Wan Xi Peng, and Kuan Peng. "Identification of Chemical Components of Waste Leaves from Cinnamomum camphora by Py-GC/MS." Advanced Materials Research 230-232 (May 2011): 842–46. http://dx.doi.org/10.4028/www.scientific.net/amr.230-232.842.

Full text
Abstract:
In order to better utilize and recover the productive waste leaves from the Cinnamomum camphora, pyrolysis- GC/MS technology was used to analyze the possible top value-added components of benzene/ethanol extractives of Cinnamomum camphora leaves. Relative content of each component was determined by area normalization. 95 compounds from 102 peaks representing 99.216% of the benzene/ethanol extractives of Cinnamomum camphora leaves were identified, and the main constituents were Hexadecanoic acid, 4-nitrophenyl ester (17.336%), Vitamin E (4.804%), Oxirane, hexadecyl- (4.639%), 2,6-Bis(3,4-methyl
APA, Harvard, Vancouver, ISO, and other styles
34

de, Haro Juan Carlos, JUAN F. RODRIGUEZ, Martínez Angel Pérez, and Franco Manuel Carmona. "Incorporation of azide groups into bio-polyols." Journal of Cleaner Production 138 (December 1, 2016): 77–82. https://doi.org/10.1016/j.jclepro.2016.05.012.

Full text
Abstract:
The synthesis of polyols from renewable resources, primarily unsaturated vegetable oils, is increasing in importance in the polyurethane market. In this work, previously epoxidized grape seed oil was transformed&nbsp;into an azide-functionalized bio-polyol through a ringeopening reaction with sodium azide. The&nbsp;effectiveness of the ringeopening reaction was confirmed by analysing the depletion of the oxirane&nbsp;group content in the bulk mixture and by Fourier transform infrared spectroscopy (FT-IR). A pseudo-firstorder&nbsp;model was proposed for predicting the evolution of epoxide group
APA, Harvard, Vancouver, ISO, and other styles
35

Tavassoli-Kafrani, Mohammad Hossein, Frederik R. van de Voort, and Jonathan M. Curtis. "The use of ATR-FTIR spectroscopy to measure changes in the oxirane content and iodine value of vegetable oils during epoxidation." European Journal of Lipid Science and Technology 119, no. 7 (2017): 1600354. http://dx.doi.org/10.1002/ejlt.201600354.

Full text
APA, Harvard, Vancouver, ISO, and other styles
36

Raden Siti Amirah, Hambali, Mohd Ahmad Faiza, and Azemi Samsuri. "Synthesis and Characterization of Non-Isocyanate Polyurethane from Epoxidized Linoleic Acid – A Preliminary Study." Advanced Materials Research 812 (September 2013): 73–79. http://dx.doi.org/10.4028/www.scientific.net/amr.812.73.

Full text
Abstract:
Non-isocyanate polyurethane (NIPU) was synthesized from epoxidized linoleic acid (ELA) from rubber seed oil. In this study, carboxylation method was used to synthesize a new monomer, carboxylated linoleic acid (CLA) to produce urethane inter-linkage polymer. ELA with tetrabutylammonium bromide (TBABr) as catalyst was purged with carbon dioxide as gas reactant. Pressure and temperature reactions were controlled at 10 psi and 150 °C. CLA was mixed with ethylenediamine (EDA) and the viscous mixture was cured in a covered mold in an oven at 100 °C and curing was performed after 12 hours. Tacky tes
APA, Harvard, Vancouver, ISO, and other styles
37

Sharma, Neha, Lekha Charan Meher, Krishna Chandra, Anjali Kumari, and Madhu Bala. "Chemical Modification of Camelina Oil based Unsaturated Fatty Acid for Renewable Biolubricant Base Stock." Asian Journal of Chemistry 33, no. 1 (2020): 37–42. http://dx.doi.org/10.14233/ajchem.2021.22910.

Full text
Abstract:
A green and eco-friendly method for preparation of oleochemicals from Camelina oil was developed for possible application for bio-lubricant basestocks, The steps involved are consisting of epoxidation of Camelina oil based fatty acid followed by further branching with wide range of alcohol such as 2-propanol, n-butanol, isoamyl alcohol and 2-ethylhexanol. These products were evaluated with physico-chemical properties such as acid value, oxirane oxygen content (OOC), hydroxyl value, low temperature properties, viscosity at 40 and 100 °C, viscosity index and characterized by FTIR, 1H NMR. The ap
APA, Harvard, Vancouver, ISO, and other styles
38

Pomilovskis, Ralfs, Inese Mierina, Hynek Beneš, et al. "The Synthesis of Bio-Based Michael Donors from Tall Oil Fatty Acids for Polymer Development." Polymers 14, no. 19 (2022): 4107. http://dx.doi.org/10.3390/polym14194107.

Full text
Abstract:
In this study, the synthesis of a Michael donor compound from cellulose production by-products—tall oil fatty acids—was developed. The developed Michael donor compounds can be further used to obtain polymeric materials after nucleophilic polymerization through the Michael reaction. It can be a promising alternative method for conventional polyurethane materials, and the Michael addition polymerization reaction takes place under milder conditions than non-isocyanate polyurethane production technology, which requires high pressure, high temperature and a long reaction time. Different polyols, th
APA, Harvard, Vancouver, ISO, and other styles
39

Jalil, Mohd Jumain, Nurul Hasna Asniera Rasnan, Aliff Farhan Mohd Yamin, et al. "Optimization of Epoxidation Palm-Based Oleic Acid to Produce Polyols." Chemistry & Chemical Technology 16, no. 1 (2022): 66–73. http://dx.doi.org/10.23939/chcht16.01.066.

Full text
Abstract:
Optimization of epoxidation by using response surface methodology (RSM) based on three-level three-factorial central composite design (CCD) was used. Response percentage of relative oxirane content (%RCO) was studied to determine the optimum reaction condition for production of polyols. The predicted value of model (85 %) was excellent in accordance to experimental value (81 %). All parameters (temperature, molar ratio of formic acid to oleic acid and molar ratio of hydrogen peroxide to oleic acid) were significant in influencing the course of epoxidation reaction (p &lt; 0.05). The interactio
APA, Harvard, Vancouver, ISO, and other styles
40

Salimon, Jumat, Nadia Salih, and Bashar Mudhaffar Abdullah. "Production of Chemoenzymatic Catalyzed Monoepoxide Biolubricant: Optimization and Physicochemical Characteristics." Journal of Biomedicine and Biotechnology 2012 (2012): 1–11. http://dx.doi.org/10.1155/2012/693848.

Full text
Abstract:
Linoleic acid (LA) is converted to per-carboxylic acid catalyzed by an immobilized lipase fromCandida antarctica(Novozym 435). This per-carboxylic acid is only intermediate and epoxidized itself in good yields and almost without consecutive reactions. Monoepoxide linoleic acid 9(12)-10(13)-monoepoxy 12(9)-octadecanoic acid (MEOA) was optimized using D-optimal design. At optimum conditions, higher yield% (82.14) and medium oxirane oxygen content (OOC) (4.91%) of MEOA were predicted at 15 μL of H2O2, 120 mg of Novozym 435, and 7 h of reaction time. In order to develop better-quality biolubricant
APA, Harvard, Vancouver, ISO, and other styles
41

Zhou, Yanqiu, Junjie Chen, Limin Zhang, Hui Huang, Rufang Peng, and Bo Jin. "Synthesis and Characterization of Random Block Hydroxyl-Terminated Polyfluoroether-Based Polyurethane Elastomers with Fluorine-Containing Side Chains." Polymers 15, no. 2 (2023): 288. http://dx.doi.org/10.3390/polym15020288.

Full text
Abstract:
Polype ntafluoropropane glycidyl ether (PPFEE), a new random block hydroxyl-terminated polyfluoroether, was synthesized successfully by cationic ring-opening polymerization of 2-(2,2,3,3,3-pentafluoropropoxymethyl) oxirane, and its molecular structure was confirmed by Fourier transform infrared spectroscopy, nuclear magnetic resonance spectrometry, and gel permeation chromatography. The PPFEE-based polyurethane elastomers featuring fluorine in their side chains were prepared using PPFEE as soft segments, polyisocyanate polyaryl polymethylene isocyanate as hard segments, and dibutyltin dilaurat
APA, Harvard, Vancouver, ISO, and other styles
42

Gorbach, L. A., N. V. Babkina, O. G. Purikova, A. V. Barantsova, V. К. Grischenko, and O. O. Brovko. "Physics-mechanical and viscoelastic properties of polymer compositions based on synthetic oligomer ED-20 and epoxidized soybean oil." Polymer journal 43, no. 2 (2021): 95–102. http://dx.doi.org/10.15407/polymerj.43.02.095.

Full text
Abstract:
The work was aimed at studying the effects of combining epoxidized soybean oil (ESO) with standard bisphenol type A epoxy resin (ED-20). The ED-20 / ESO ratios were 100/0, 90/10, 95/15 and 80/20 (wt%). The system was cured with amine hardener mono(cyanethyl) diethylenetriamine (MCDT), triethanolamine (TEA) and mixture thereof (TEA + MCDT) at different curing temperatures. The choice was based on the hardener’s ability to open oxirane cycles, form a spatial network and initiate several parallel reactions. The viscoelastic properties, mechanical properties (tensile strength and elongation) were
APA, Harvard, Vancouver, ISO, and other styles
43

Nor, Nurazira, Nadia Salih, and Jumat Salimon. "Chemically modified Jatropha curcas oil for biolubricant applications." Chemical Industry 75, no. 2 (2021): 117–28. http://dx.doi.org/10.2298/hemind200809009n.

Full text
Abstract:
Jatropha curcas oil is one of interesting renewable resources for preparation of biolubricants. However, direct application of this oil as a biolubricant is restricted due to its low oxidative stability. This drawback can be overcome by molecule structural redesign through a chemical modification process at its unsaturated functional groups. Jatropha curcas oil was modified via epoxidation, ring opening and esterification processes. Its conversion to the epoxidized oil was performed by using in situ performic acid as a catalyst, then reaction with oleic acid in the presence of p-toluenesulfoni
APA, Harvard, Vancouver, ISO, and other styles
44

Santos, Bruna Celeida Silva, Andressa Soares Pires, Célia Hitomi Yamamoto, et al. "Methyl Chavicol and Its Synthetic Analogue as Possible Antioxidant and Antilipase Agents Based on the In Vitro and In Silico Assays." Oxidative Medicine and Cellular Longevity 2018 (2018): 1–11. http://dx.doi.org/10.1155/2018/2189348.

Full text
Abstract:
This study investigated the in vitro and in silico biological properties of the methyl chavicol (MC) and its analogue 2-[(4-methoxyphenyl)methyl]oxirane (MPMO), emphasizing the antioxidant and antilipase effects. MPMO was synthesized from MC that reacted with meta-chloroperbenzoic acid and, after separation and purification, was identified by 1H and 13C NMR and GC-MS. The antioxidant activity was investigated by DPPH, cooxidation β-carotene/linoleic acid, and thiobarbituric acid assays. With the use of colorimetric determination, the antilipase effect on the pancreatic lipase was tested, while
APA, Harvard, Vancouver, ISO, and other styles
45

Soni, D. K., A. Maithani, and P. K. Kamani. "Synthesis and Characterization of Non-Isocyanate Polyurethanes using Diglycidyl Ether of Bisphenol Acetone (DGEBPA) Epoxy Resin." Asian Journal of Chemistry 34, no. 8 (2022): 2155–60. http://dx.doi.org/10.14233/ajchem.2022.23855.

Full text
Abstract:
Present work focuses on synthesis of non-isocyanate polyurethane (NIPU) using the conventional epoxy resin, diglycidyl ether of bisphenol acetone (DGEBPA). The conventional polyurethanes (PUs) are prepared by reaction of the toxic diisocyanates and polyols. The epoxy resin contains two epoxy groups which are converted to cyclic carbonate groups when reacted with carbon dioxide. In this work, the epoxy resin (ER) was converted into the cyclocarbonated epoxy resin (CCER) using methyltriphenylphosphonium iodide (MePh.I) as the catalyst and ethyl cellsuolve as the reaction medium. The reaction was
APA, Harvard, Vancouver, ISO, and other styles
46

Cappello, Miriam, Sara Filippi, Damiano Rossi, et al. "Waste-Cooking-Oil-Derived Polyols to Produce New Sustainable Rigid Polyurethane Foams." Sustainability 16, no. 21 (2024): 9456. http://dx.doi.org/10.3390/su16219456.

Full text
Abstract:
Polyurethanes (PUs) are one of the most versatile polymeric materials, making them suitable for a wide range of applications. Currently, petroleum is still the main source of polyols and isocyanates, the two primary feedstocks used in the PU industry. However, due to future petroleum price uncertainties and the need for eco-friendly alternatives, recent efforts have focused on replacing petrol-based polyols and isocyanates with counterparts derived from renewable resources. In this study, waste cooking oil was used as feedstock to obtain polyols (POs) for new sustainable polyurethane foams (PU
APA, Harvard, Vancouver, ISO, and other styles
47

Mohamed, Abdellatif A., S. Hussain, M. S. Alamri, M. A. Ibraheem, and Akram A. Abdo Qasem. "Thermal Degradation and Water Uptake of Biodegradable Resin Prepared from Millet Flour and Wheat Gluten Crosslinked with Epoxydized Vegetable Oils." Journal of Chemistry 2019 (November 29, 2019): 1–12. http://dx.doi.org/10.1155/2019/7050514.

Full text
Abstract:
The degradation temperatures (DTs), heat stability (IPDT), degradation kinetics, and water uptake of epoxy resin were investigated using thermogravimetric analysis. Epoxy resins were prepared by crosslinking epoxydized oils with vital wheat gluten (VG) and millet flour. The reactions included three oils (cottonseed, sesame, and sunflower) and three levels of zinc chloride (ZC) (1, 2, and 3%). The apparent activation energy (Ea) was calculated using the Flynn–Wall–Ozawa method. The DT increased at higher heating rates within the same ZC level of the same oil type. Cottonseed oil exhibited the h
APA, Harvard, Vancouver, ISO, and other styles
48

Shelukhin, M. A., A. R. Khokhryakov, M. A. Podshibnev, et al. "Electrodeposition of Zinc-Nickel Alloy from Alkaline Amine-containing Electrolyte." Practice of Anticorrosive Protection 30, no. 2 (2025): 40–55. https://doi.org/10.31615/j.corros.prot.2025.116.2-4.

Full text
Abstract:
This work proposes a method for synthesizing an amine-containing compound from polyamine (PA-10) and an oxirane series compound (M-10) capable of forming strong, alkaline-stable complexes with Ni2+ ions. The effect of the ratio of the initial monomers for synthesizing the complexing component of the alkaline electrolyte for the process of electrodeposition of zinc-nickel alloy, as well as the molar ratio of Ni2+ and the complexing component (PA-10M1.5) in the solution on the Ni content in the alloy and the appearance of the resulting coatings was studied. It was established that the optimal mo
APA, Harvard, Vancouver, ISO, and other styles
49

Chai, Kai Ling, Min Min Aung, Hong Ngee Lim, Ikhwan Syafiq Mohd Noor, Luqman Chuah Abdullah, and Hiroshi Uyama. "Synthesis, Characterisation, and Electrochemical Impedance Spectroscopy Study of Green and Sustainable Polyurethane Acrylate from Jatropha Oil Using a Three Step Process." Pertanika Journal of Science and Technology 30, no. 3 (2022): 2127–38. http://dx.doi.org/10.47836/pjst.30.3.21.

Full text
Abstract:
Bio-based polymer is a promising candidate to substitute conventional petroleum-derived polymer as it is sustainably produced from renewable resources, which helps reduce the production process’ carbon footprint. It also helps reduces humankind’s dependability on fossil fuel-based feedstock. In this work, a sustainable jatropha oil-based polyurethane acrylate (PUA) was successfully prepared and synthesised using a 3-steps process; epoxidation (formation of an epoxy group), hydroxylation (addition of–OH group to opened ring), and acrylation (addition of acrylate group into polyol). The yellowis
APA, Harvard, Vancouver, ISO, and other styles
50

Robota, Liudmyla, OLENA AKHRANOVYCH, OLEKSANDRA BRYKOVA, and YURII SAVELIEV. "Polyurethane based on modifi ed soybean oil." Polymer journal 46, no. 3 (2024): 177–85. https://doi.org/10.15407/polymerj.46.03.177.

Full text
Abstract:
New polyurethanes with more than 70 % plant-derived polyol content were prepared using soybean polyol (SP) as a diisocyanate extender castor oil precursor, and aqueous dispersions using SP (1 and 5 wt.%) mixed with polyoxytetramethylene glycol (PF) as the polyester component. Soybean polyols reactive in urethane formation reactions were obtained by hydroxy functionalization of epoxidized soybean oil (ESO) with diethanolamine without the use of a catalyst. Comparative IR spectroscopic studies of their structure with the structure of the starting materials revealed incomplete amidation of ESO wi
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!