Log in

Relevant bibliographies by topics / Package of plates

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Package of plates'

Author: Grafiati

Published: 28 May 2022

Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Package of plates.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Package of plates"

1

Zivkovic, Predrag, Mladen Tomic, Jelena Janevski, Zana Stevanovic, Biljana Milutinovic, and Mica Vukic. "Experimental and analytical research of the heat transfer process in the package of perforated plates." Thermal Science 20, suppl. 5 (2016): 1251–57. http://dx.doi.org/10.2298/tsci16s5251z.

Full text

Abstract:

The need for compact heat exchangers has led to the development of many types of surfaces that enhance the rate of heat transfer, among them the perforated plate heat exchangers, also known as matrix heat exchangers. The perforated plate heat exchangers consist of a series of perforated plates that are separated by a series of spacers. The present study investigates the heat transfer characteristics of the package of perforated plates. Perforated plates were 2 mm thick, with holes with 2 mm in diameter and porosity of 25.6%. The package of one, two, and three perforated plates was set in the c

APA, Harvard, Vancouver, ISO, and other styles

2

LUCHANSKY, JOHN B., ANNA C. S. PORTO, F. MORGAN WALLACE, and JEFFREY E. CALL. "Recovery of Listeria monocytogenes from Vacuum-Sealed Packages of Frankfurters: Comparison of the U.S. Department of Agriculture (USDA) Food Safety and Inspection Service Product Composite Enrichment Method, the USDA Agricultural Research Service (ARS) Product Composite Rinse Method, and the USDA-ARS Package Rinse Method†‡." Journal of Food Protection 65, no. 3 (2002): 567–70. http://dx.doi.org/10.4315/0362-028x-65.3.567.

Full text

Abstract:

This study compared three methods for the recovery of Listeria monocytogenes from commercially prepared and vacuum-packaged frankfurters that were inoculated with a five-strain mixture of this pathogen at averages of 22 and 20,133 CFU per package over three trials. The presence and levels of the pathogen were determined by (i) the U.S. Department of Agriculture (USDA) Food Safety and Inspection Service (FSIS) product composite enrichment method, involving the selective enrichment of a 25-g composite of product and the subsequent plating of this product onto selective agar plates; (ii) the USDA

APA, Harvard, Vancouver, ISO, and other styles

3

Torres-Londoño, Gabriel Andrés, Mary Hausbeck, and Jianjun Hao. "ECX: An R Package for Studying Sensitivity of Antimicrobial Substances Using Spiral Plating Technology." Plant Health Progress 17, no. 3 (2016): 188–94. http://dx.doi.org/10.1094/php-rs-16-0020.

Full text

Abstract:

Spiral plating technique is reliable, repeatable, and more efficient than dilution plating methods in studying the efficacy of antimicrobial products. In this method, the concentration of chemicals can be varied at different positions on agar plates, but its calculation requires using a commercial software. To establish a user-friendly and cost-free platform, the R package ECX was developed to calculate chemical concentrations in spiral plating technique. Mathematical models were established for calculating dispensed volume on agar plates using variables (molecular weight and agar height) that

APA, Harvard, Vancouver, ISO, and other styles

4

Kozak, R. O., and I. I. Kusniak. "Modeling of the plywood making process glued with thermoplastic polymer." Forestry, Forest, Paper and Woodworking Industry 45 (December 30, 2019): 95–98. http://dx.doi.org/10.36930/42194511.

Full text

Abstract:

A promising variety of the wood composite materials is plywood glued with thermoplastic polymers. However, making such a wood composite requires adjustment of the pressing modes, because there is a slightly difference between the hot method of the veneer packages pressing glued with thermoplastic films and the method of the veneer packages pressing glued with thermosetting adhesives. Among the main processes that occur in the gluing plywood process are heat and mass transfer. The availability of the thermoplastic film between the veneer sheets is going to change the thermal conductivity of the

APA, Harvard, Vancouver, ISO, and other styles

5

Kovtun, Igor, Juliy Boiko, Svitlana Petrashchuk, and Tomasz Kałaczyński. "Theory and practice of vibration analysis in electronic packages." MATEC Web of Conferences 182 (2018): 02015. http://dx.doi.org/10.1051/matecconf/201818202015.

Full text

Abstract:

The paper represents theoretical and experimental vibration analysis of electronic packages. The research objectives are bearing parts, such as printed circuit boards, walls of the cases and electronic components, in enclosed electronic packages subjected to vibration during their operation. The theoretical model of the oscillation system representing electronic package installed on the support subjected to vibration is described. Vibration transmission from the shaker to the tested electronic package is explained as the complex problem to solve. The experimental measurement verified significa

APA, Harvard, Vancouver, ISO, and other styles

6

Schastlivtsev, V. M., Yu V. Khlebnikova, D. P. Rodionov, and L. Yu Egorova. "Analysis of the crystallogeometry of tetragonal martensite in indium-cadmium alloys by the method of electron back scattering diffractions." Доклады Академии наук 486, no. 1 (2019): 44–48. http://dx.doi.org/10.31857/s0869-5652486144-48.

Full text

Abstract:

It was shown in the work using electron back scattering diffractions analysis that when cooling lower than temperature of the martensitic fcc-hct transformation in the alloy In - 4.5 wt% Cd a packet structure is formed consisting of colonies of tetragonal lamella plates. At the next packages there are always three grades of the plates of a tetragonal martensite which are in twinning situation and differing with the direction of the tetragonality axis. Each martensitic plate consists in turn of a set of more shallow submicrotwinning plates alternating in the direction of an axis of tetragonalit

APA, Harvard, Vancouver, ISO, and other styles

7

CALICCHIA, MELISSA L., JANICE D. REGER, CONNIE I. N. WANG, and DARYL W. OSATO. "Direct Enumeration of Escherichia coli O157:H7 from Petrifilm™ EC Count Plates Using the Petrifilm™ Test Kit — HEC Without Sample Pre-Enrichment." Journal of Food Protection 57, no. 10 (1994): 859–64. http://dx.doi.org/10.4315/0362-028x-57.10.859.

Full text

Abstract:

Enumeration of Escherichia coli O157:H7 from Petrifilm™ E. coli (PEC) Count plates was studied incorporating the Petrifilm™ -HEC kit without sample pre-enrichment. Samples containing various E. coli O157:H7 inoculum levels were plated according to PEC package insert instructions. Plates were incubated at 32°C for dairy products and at 35°C for other samples. Total coliform, E. coli and E. coli O157:H7 levels were quantified in both control and inoculated samples. The average recovery from various food matrices was 74.8%. Food samples included retail soft cheese, clams, ground beef, chicken, sa

APA, Harvard, Vancouver, ISO, and other styles

8

Kasimov, A. T. "INVESTIGATION OF LAYERED ORTHOTROPIC STRUCTURES BASED ON ONE MODIFIED REFINED BENDING THEORY." Eurasian Physical Technical Journal 18, no. 4 (38) (2021): 37–44. http://dx.doi.org/10.31489/2021no4/37-44.

Full text

Abstract:

In the article, constructions made of orthotropic multilayer composite material, in particular, layered orthotropic plates are considered. Numerical modeling and analysis of the stress-strain state for the plates are carried out on the basis of one version for the refined theory of layered plates. The bending problems for plates of medium thickness and thin multilayer plates of symmetric and asymmetric structures are investigated. All studies are conducted taking into account the properties of orthotropy and multilayering for the composite material from which the plates are made. The general a

APA, Harvard, Vancouver, ISO, and other styles

9

Kryshchuk, Mykola, Egor Ovcharenko, and Hanna Us. "Determination of elastic characteristics for a package of monolayers thin-walled plates from composite fibrous materials." Mechanics and Advanced Technologies 7, no. 2 (98) (2023): 155–59. http://dx.doi.org/10.20535/2521-1943.2023.7.2.287711.

Full text

Abstract:

An analytical method for calculating the equivalent elastic characteristics of anisotropic multilayer plates made of composite fibrous materials is laid out. The main assumptions taken into consideration when calculating elastic moduli and Pousson's coefficients are that fibers are elastic materials with orthotropic mechanical characteristics that deform together when multilayer plates are loaded. Analytical methods for calculating effective modulus of elasticity most common in practical applications of applied mechanics are laid out in the list of cited publications. These include the rules o

APA, Harvard, Vancouver, ISO, and other styles

10

Stefani, G. G., N. S. Goel, and D. B. Jenks. "An Efficient Numerical Technique for Thermal Characterization of Printed Wiring Boards." Journal of Electronic Packaging 115, no. 4 (1993): 366–72. http://dx.doi.org/10.1115/1.2909345.

Full text

Abstract:

Thermal modeling of Surface Mount Technology (SMT) microelectronics packages is difficult due to the complexity of the printed wiring board (PWB) plates through hole (PTH) structure. A simple, yet powerful finite difference based approach, called EPIC (Equivalent Parameter for Interfacial Cells), for modelling complex 2-D and 3-D geometries with multiple materials is used to model the PTH structure. A technique for computing an effective thermal conductivity for the PWB is presented. The results compare favorably with those from a commercially available finite element package but require far l

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Package of plates"

1

Chen, Songqing. "Development of a neural network based software package for the automatic recognition of license plate characters." Ohio : Ohio University, 1992. http://www.ohiolink.edu/etd/view.cgi?ohiou1172092299.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Freeman, Lora B. "Development of an optimized short-span steel bridge package." Morgantown, W. Va. : [West Virginia University Libraries], 2005. https://eidr.wvu.edu/etd/documentdata.eTD?documentid=4310.

Full text

Abstract:

Thesis (M.S.)--West Virginia University, 2005.<br>Title from document title page. Document formatted into pages; contains xv, 141 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 139-141).

APA, Harvard, Vancouver, ISO, and other styles

3

Na, Nanju. "Modeling and simulation of planes in electronic packages." Diss., Georgia Institute of Technology, 2001. http://hdl.handle.net/1853/14812.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Liu, Lilin. "Materials science in pre-plated leadframes for electronic packages /." View abstract or full-text, 2006. http://library.ust.hk/cgi/db/thesis.pl?MECH%202006%20LIUL.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Zhao, Ping. "Creep corrosion over plastic encapsulated microcircuit packages with noble metal pre-plated leadframes." College Park, Md. : University of Maryland, 2005. http://hdl.handle.net/1903/3009.

Full text

Abstract:

Thesis (Ph. D.) -- University of Maryland, College Park, 2005.<br>Thesis research directed by: Mechanical Engineering. Title from t.p. of PDF. Includes bibliographical references. Published by UMI Dissertation Services, Ann Arbor, Mich. Also available in paper.

APA, Harvard, Vancouver, ISO, and other styles

6

Knott, Danielle M. "Friends in High Places: Measuring the Effects of Compensation Committee Characteristics on CEO Pay Packages in 2013." Scholarship @ Claremont, 2015. http://scholarship.claremont.edu/cmc_theses/1050.

Full text

Abstract:

In the past decade, public scrutiny surrounding rising levels of executive compensation has led to more stringent independence requirements for compensation committees. However, there is little research studying the effects of compensation committees on executive pay from the time these new requirements were implemented. My paper studies the effects of compensation committee chair personal ties to the CEO, economic interests, and group committee characteristics on both the level and structure of CEO compensation. My findings suggest that certain committee chair personal ties to the CEO are ass

APA, Harvard, Vancouver, ISO, and other styles

7

Choi, Jae Young. "Modeling and simulation for signal and power integrity of electronic packages." Diss., Georgia Institute of Technology, 2012. http://hdl.handle.net/1853/45885.

Full text

Abstract:

The objective of this dissertation is to develop electrical modeling and co-simulation methodologies for signal and power integrity of package and board applications. The dissertation includes 1) the application of the finite element method to the optimization for decoupling capacitor selection and placement on a power delivery network (PDN), 2) the development of a PDN modeling method effective for multidimensional and multilayer geometries, 3) the analysis and modeling of return path discontinuities (RPDs), and 4) the implementation of the absorbing boundary condition for PDN modeling. The

APA, Harvard, Vancouver, ISO, and other styles

8

Chung, Tevanui. "Les lieux de refuge." Thesis, Aix-Marseille 3, 2011. http://www.theses.fr/2011AIX32072.

Full text

Abstract:

Principe de droit coutumier longtemps honoré, le droit de refuge n’est plus. Les catastrophes de l’« Erika » et du « Prestige », et entre les deux, le périple du « Castor », ont largement mis en lumière cette réalité. À l’origine de ce déclin, les progrès techniques. Certains ayant permis la sauvegarde des marins en perdition sans nécessiter le déroutement du navire vers un abri. D’autres ayant eu pour conséquence de rendre dangereux et polluants la navigation.Le phénomène dit de « lèpre maritime » fut la constante, la pratique adoptée par les États côtiers confrontés à des navires en difficul

APA, Harvard, Vancouver, ISO, and other styles

9

Bharath, Krishna. "Signal and power integrity co-simulation using the multi-layer finite difference method." Diss., Atlanta, Ga. : Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/28155.

Full text

Abstract:

Thesis (M. S.)--Electrical and Computer Engineering, Georgia Institute of Technology, 2009.<br>Committee Chair: Madhavan Swaminathan; Committee Member: Andrew F. Peterson; Committee Member: David C. Keezer; Committee Member: Saibal Mukhopadyay; Committee Member: Suresh Sitaraman.

APA, Harvard, Vancouver, ISO, and other styles

10

Ye, Qiao-Ling, and 葉巧齡. "Multimedia Thermal CAD Package for Electronics Multilayer Structures with Compact Cold Plates." Thesis, 2001. http://ndltd.ncl.edu.tw/handle/09244142932161991383.

Full text

Abstract:

碩士<br>國立清華大學<br>動力機械工程學系<br>89<br>A new user-friendliness multimedia thermal CAD system for thermal design of electronics multilayer structures integrated with a compact cold plate has been successfully developed on Microsoft Windows 98 system. New multimedia technologies, such as voice helper, graphical illustrations, and animated Graphics Interchange Format, employed in the present developed CAD system provide a very friendly and interactive interface for users. The fundamental design concepts for the developed pre-processor, thermal analyzer, and post-processor on Microsoft Windows 98 sys

APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Package of plates"

1

Chow, L. C. Safety review package for University of Central Florida flat-plate heat pipe experiment. National Aeronautics and Space Administration, 1998.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Land, Brenda. Surface water package treatment plant: The MIOX P-3 unit. U.S. Dept. of Agriculture, Forest Service, Technology & Development Program, 1998.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

L, Willing D., U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Regulatory Applications., and Argonne National Laboratory, eds. Replacement energy cost analysis package (RECAP): User's guide. Division of Regulatory Applications, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1994.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

L, Willing D., U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Regulatory Applications., and Argonne National Laboratory, eds. Replacement energy cost analysis package (RECAP): User's guide. Division of Regulatory Applications, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1994.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

W, Bolander T., Idaho National Engineering Laboratory, and U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research., eds. Verification and validation of the SAPHIRE version 4.0 PRA software package. Division of Safety Issue Resolution, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1994.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Pyper, Gordon Richardson. Slow sand filter and package treatment plan evaluation: Operating costs and removal of bacteria, giardia, and trihalomethanes. U.S. Environmental Protection Agency, Water Engineering Research Laboratory, 1985.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Pyper, Gordon Richardson. Slow sand filter and package treatment plan evaluation: Operating costs and removal of bacteria, giardia, and trihalomethanes. U.S. Environmental Protection Agency, Water Engineering Research Laboratory, 1985.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Schwabe, Paul. IEA Wind Task 26: Work package : multi-national case study of the financial cost of wind energy. National Renewable Energy Laboratory, 2010.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Bay Area Air Quality Management District. Major facility review public comment package: Including proposed permit, compliance report, permit evaluation/statement of basis, permit application : for facility #A0026, Mirant Potrero, LLC. Bay Area Air Quality Management District, 2004.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Bay Area Air Quality Management District. Major facility review public comment package: Including proposed permit, compliance report, permit evaluation/statement of basis, permit application : for facility#A0024, Pacific Gas & Electric. Bay Area Air Quality Management District, 2004.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Package of plates"

1

Hejazi, Farzad, and Hojjat Mohammadi Esfahani. "Explosive Loading on a Sandwich Plate." In Solving Complex Problems for Structures and Bridges Using ABAQUS Finite Element Package. CRC Press, 2021. http://dx.doi.org/10.1201/9781003213369-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Hejazi, Farzad, and Hojjat Mohammadi Esfahani. "Analysis of Steel Rectangular Plate with Circular Hole." In Solving Complex Problems for Structures and Bridges Using ABAQUS Finite Element Package. CRC Press, 2021. http://dx.doi.org/10.1201/9781003213369-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Hejazi, Farzad, and Hojjat Mohammadi Esfahani. "Post-Buckling Analysis of Steel Plate Shear Wall." In Solving Complex Problems for Structures and Bridges Using ABAQUS Finite Element Package. CRC Press, 2021. http://dx.doi.org/10.1201/9781003213369-9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Lee, Sung Jun, Ji Hyun Park, Chang Hyun Lim, Won Kyu Jeong, Seog Moon Choi, and Yong Soo Oh. "MEMS Based Metal Plated Silicon Package for High Power LED." In Experimental Mechanics in Nano and Biotechnology. Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-415-4.309.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Santos, Marcos F., Marcelo C. Santos, Leonardo C. Oliveira, Sonia A. Costa, João B. Azevedo, and Maurício Galo. "ProGriD: The Transformation Package for the Adoption of SIRGAS2000 in Brazil." In Geodesy for Planet Earth. Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-20338-1_109.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Suhir, E., and X. J. Fan. "Failure Criterion for Moisture-Sensitive Plastic Packages of Integrated Circuit (IC) Devices: Application and Extension of the Theory of Thin Plates of Large Deflections." In Moisture Sensitivity of Plastic Packages of IC Devices. Springer US, 2010. http://dx.doi.org/10.1007/978-1-4419-5719-1_10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Orlov, Denis, Valeria Serdakova, Maxim Evtushenko, Ekaterina Khnyryova, and Alexandra Nikolaeva. "Investigating the Features of Various Plate Models Under the Thermal Shock in the ANSYS Package." In XV International Scientific Conference “INTERAGROMASH 2022”. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-21432-5_340.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Luescher, Andreas, and Sujata Shetty. "The Packard Plant as a Testament to Automotive Heritage." In Urban Shrinkage, Industrial Renewal and Automotive Plants. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-030-03380-4_3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Aghalovyan, Lenser A., and Mher L. Aghalovyan. "On One Non-classical 3D Problem for a Layered Package of Isotropic Plate and the Problem of Earthquakes Prediction." In Solid Mechanics, Theory of Elasticity and Creep. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-18564-9_1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Beatrice, Carlo, Armando Cartenì, Ennio Cascetta, et al. "A Feasibility Study on the Italian Road Transportation Capability to Meet the 2030 EU Decarbonization Targets." In Lecture Notes in Mobility. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-89444-2_7.

Full text

Abstract:

Abstract This work focuses on the analysis of future feasible 2030 scenarios of the Italian vehicle fleet in view of the decarbonization targets agreed within the “Fit for 55” package. This was done through a calculation model of the Italian road fleet’s Well-to-Wheel GHG emissions and energy consumption of the energy carrier supply chains. The same EU targets for the sectors covered by the Emission Trading System was assumed (−43.7% GHG emissions compared to 2005). In a deep uncertainty contest, two different scenarios have been built up to represent the upper and lower bound of a range in wh

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Package of plates"

1

Hung, Sheng-Hsi, Tz-Wun Wang, Chien-Wei Cho, et al. "Field Plate and Package Optimization for GaN Devices and Systems." In 2024 IEEE Symposium on VLSI Technology and Circuits (VLSI Technology and Circuits). IEEE, 2024. http://dx.doi.org/10.1109/vlsitechnologyandcir46783.2024.10631457.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Gordo, Jose´ Manuel. "Effect of Initial Imperfections on the Strength of Restrained Plates." In ASME 2011 30th International Conference on Ocean, Offshore and Arctic Engineering. ASMEDC, 2011. http://dx.doi.org/10.1115/omae2011-49161.

Full text

Abstract:

Most common studies on the strength of plates under compressive longitudinal loading are related to plates having unrestrained edges which lead to a zero net load in the transverse direction. In ships, the framing system and the continuity of the plating in the transverse direction tend to induce rather different boundary conditions on the ‘unloaded’ edges, which results in a completely different state of stresses when the external loads are applied. This is due to the surge of a significant level of induced membrane stresses in the direction perpendicular to loading. In this work, the behavio

APA, Harvard, Vancouver, ISO, and other styles

3

Cheok, B. T., and A. Y. C. Nee. "Algorithms for Nesting of Ship/Offshore Structural Plates." In ASME 1991 Design Technical Conferences. American Society of Mechanical Engineers, 1991. http://dx.doi.org/10.1115/detc1991-0122.

Full text

Abstract:

Abstract This paper discusses the development of a set of algorithms for the automatic nesting of ship/offshore structural plates. The algorithms are developed to take advantage of the peculiarity of most ship/offshore structural plates with the aims of optimising material usage and minimising computer search time. The parts to be nested are first processed by a shape processing routine which employs a simple feature extraction approach to classify the plates according to predefined rules specially adopted for ship/offshore structural shapes. The most appropriate search path for each class of

APA, Harvard, Vancouver, ISO, and other styles

4

Peng, Fujun, Alfred Ng, and Yan-Ru Hu. "Adaptive Vibration Control of Flexible Plate Structures With Actuator Placement Optimization." In ASME 2003 International Mechanical Engineering Congress and Exposition. ASMEDC, 2003. http://dx.doi.org/10.1115/imece2003-41085.

Full text

Abstract:

This paper investigates piezoelectric actuator placement optimization on a rectangular plate structure and the vibration control of the structure. In the first part, an actuator placement optimization method is developed based on maximizing the controllability grammian. It is then implemented using Structuring Analysis in ANSYS Finite Element Analysis Package and Genetic Algorithm. In the second part, a filtered-x LMS-based multi-channel adaptive control is used to suppress vibration response of the plate. Numerical simulations are performed in suppressing tri-sinusoidal response at three poin

APA, Harvard, Vancouver, ISO, and other styles

5

Bobbili, Prabhakara Rao, and Bengt Sunden. "Steam Condensation in Parallel Channels of Plate Heat Exchangers." In ASME 2010 International Mechanical Engineering Congress and Exposition. ASMEDC, 2010. http://dx.doi.org/10.1115/imece2010-39974.

Full text

Abstract:

An experimental investigation has been carried out to find the nature of temperature profiles of the process and cooling fluids during steam condensation across the port to channel in plate heat exchangers (PHEs). In the present study, low corrugation angle (30°) plates have been used for different plate package of PHEs with 41 and 81 plates. The process steam entered at 1 bar with a small degree of superheat. Water has been used as the cold fluid. A traverse temperature probe is inserted into both inlet and outlet ports of the plate heat exchanger. The temperature of the process steam and coo

APA, Harvard, Vancouver, ISO, and other styles

6

Li, Ze-Hui, Zhen-Hai Chen, Fu-Peng Zhou, Xue-Zhi Zhao, and Wen-Bin Shangguan. "Heat Dissipation Performance Analysis of Liquid-Cooled Plate in Battery Package System." In WCX SAE World Congress Experience. SAE International, 2024. http://dx.doi.org/10.4271/2024-01-2674.

Full text

Abstract:

<div class="section abstract"><div class="htmlview paragraph">A liquid-cooled plate is an important component for cooling batteries inside a battery package system. The structure of the liquid-cooling plate significantly affects the temperature conditions of power batteries and the energy consumption of the liquid-cooling system. However, there is a lack of precise knowledge regarding the specific factors that contribute to these impacts. In this study, the influence of structural parameters of flow channel on the heat dissipation performance is studied to solve above problems. A t

APA, Harvard, Vancouver, ISO, and other styles

7

Jeffers, N., J. Punch, and E. Walsh. "An Experimental Characterization of Miniature Scale Cold Plates for Electronics Cooling Applications." In ASME/JSME 2007 Thermal Engineering Heat Transfer Summer Conference collocated with the ASME 2007 InterPACK Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/ht2007-32537.

Full text

Abstract:

Contemporary electronic systems are currently constrained by the high heat fluxes in which they generate at component level. It is evident that heat fluxes are currently approaching the limits of forced air cooling, and that liquid cooling is now under consideration. In this paper five commercially-available and one custom-made cold plates were characterised experimentally. The six cold plates utilized different geometries which included: an array of jets impinging onto a pin matrix; a fin structure; a pin fin structure; a large serpentine channel structure; a slot jet impinging onto wave shap

APA, Harvard, Vancouver, ISO, and other styles

8

Miller, Samuel J., and Hakan Ozaltun. "Evaluation of U10Mo Fuel Plate Irradiation Behavior via Numerical and Experimental Benchmarking." In ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-89588.

Full text

Abstract:

This article analyzes dimensional changes due to irradiation of monolithic plate-type nuclear fuel and compares results with finite element analysis of the plates during fabrication and irradiation. Monolithic fuel plates tested in the Advanced Test Reactor (ATR) at Idaho National Lab (INL) are being used to benchmark the performance of proposed fuel for several high power research reactors. Post-irradiation metallographic images of plates sectioned at the mid-plane were analyzed to determine dimensional changes of the fuel and the cladding response. A constitutive model of the fabrication pro

APA, Harvard, Vancouver, ISO, and other styles

9

Chien, Chi-Hui, Shih-Chun Li, Wei-Tsung Hsu, and Chih-Wei Lin. "Effect of Bolts Locking Sequence on Flow-Channel Plate in Micro-PEMFC." In ASME 2008 6th International Conference on Fuel Cell Science, Engineering and Technology. ASMEDC, 2008. http://dx.doi.org/10.1115/fuelcell2008-65162.

Full text

Abstract:

The design and method of cell assembly play important roles in assessing the performance of PEM fuel cell. The cell assembly will affect the contact behavior between the bipolar plates, flow-channel plates, gas diffusion layers (GDLs) and membrane electrode assembly (MEA). From the past studies, it is noted that the flow-channel plates in the cell will be deformed while the cell was assembled by locking with bolts. This phenomenon may lead to leakage of fuels, high contact resistance and malfunctioning of the cells. The main aim of this research is to study the variation of the deformation mod

APA, Harvard, Vancouver, ISO, and other styles

10

Dedijer, Sandra, Magdolna Pál, Ivana Tomić, et al. "Statistical analysis of the influence of print run on surface roughness of digital flexo printing plates’ solid tone areas." In 10th International Symposium on Graphic Engineering and Design. University of Novi Sad, Faculty of technical sciences, Department of graphic engineering and design,, 2020. http://dx.doi.org/10.24867/grid-2020-p30.

Full text

Abstract:

In this study we have aimed to present statistical evaluation of changes in the surface roughness of the solid tone areas on CtP flexo printing plate in dependence of print run. Changes in flexo plate surface roughness is influenced by the plate-making process, printing pressure and speed, the interaction with the ink and printing substrate and by the wear of the printing plate due to long print-runs. Thus, the aim of this research was to evaluate the changes in the amplitude surface roughness parameters (Ra, Rp, Rv and Rz), between the printing plates used for different print runs. In the exp

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Package of plates"

1

J.M. Scaglione. 21-PWR WASTE PACKAGE WITH ABSORBER PLATES LOADING CURVE EVALUATION. Office of Scientific and Technical Information (OSTI), 2004. http://dx.doi.org/10.2172/841280.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Nichols, William, and M. Oostrom. Model Package Report: Central Plateau Vadose Zone Models. Office of Scientific and Technical Information (OSTI), 2020. http://dx.doi.org/10.2172/1714362.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Springer, Sarah D. Model Package Report: Central Plateau Vadose Zone Geoframework Version 1.0. Office of Scientific and Technical Information (OSTI), 2018. http://dx.doi.org/10.2172/1432798.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Budge, Trevor, and Will Nichols. Model Package Report: Plateau to River Groundwater Model Version 8.3. Office of Scientific and Technical Information (OSTI), 2020. http://dx.doi.org/10.2172/1601635.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Budge, Trevor J. Model Package Report: Plateau to River Groundwater Model (Version 8.2). Office of Scientific and Technical Information (OSTI), 2019. http://dx.doi.org/10.2172/1515018.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Hauver, S., R. E. Pechacek, J. R. Greig, D. P. Murphy, and M. Raleigh. A Gated Microchannel Plate Image Intensifier Packaged in a Reflex Camera Back. Defense Technical Information Center, 1985. http://dx.doi.org/10.21236/ada163015.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Koh, Teck Seng. Enhancing STEM education through improvisational tinkering and computational thinking: A professional development package for Singapore teachers. National Institute of Education, Nanyang Technological University, Singapore, 2023. https://doi.org/10.32658/10497/27371.

Full text

Abstract:

IMprovisational Tinkering (MT) emphasizes the creative, improvisational nature of problem solving that is the hallmark of MT as an educative, inquiry-based practice in Science, Technology, Engineering and Mathematics (STEM) education. Broadly, Improvisational Tinkering refers to the skill involved in Computational Thinking (CT) refers to MT and CT align with the aspirations of the Singapore education system. The school Science curricula places, at the heart of its curricula framework, the learners to apply themselves meaningfully in the new digital age.

APA, Harvard, Vancouver, ISO, and other styles

8

Whyatt, G. A., L. D. Anderson, and J. II Evans. Detailed design data package: 3.1a-Film cooler pressure drop data; Item 3.2a - SBS packing selection; Item 3.2b, 3.2c - Pressure drop data for SBS distribution plate; and Item 3.2e - SBS distribution plate and liquid risers. PHTD pilot-scale melter testing system cost account milesonte 1.2.2.04.15A. Office of Scientific and Technical Information (OSTI), 1996. http://dx.doi.org/10.2172/212722.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Gómez-Lobo, Andrés. Putting the Passenger First: What Works and What does not Work in Urban Mobility Reforms in Latin America and the Caribbean. Inter-American Development Bank, 2025. https://doi.org/10.18235/0013367.

Full text

Abstract:

The Latin American and Caribbean region offers a rich history of innovative policies and investments in urban mobility. We review some of these experiences with the aim of extracting lessons that can provide guidance to policymakers in the design and implementation of successful urban transport reforms. Special emphasis is placed on users' welfare and how different policies impinge on their interests and behavior. Many reforms have faced difficulties by not considering the consequences of policy initiatives on users' welfare, especially their impact on time costs. Another relevant theme discus

APA, Harvard, Vancouver, ISO, and other styles

10

Simon, James E., Uri M. Peiper, Gaines Miles, A. Hetzroni, Amos Mizrach, and Denys J. Charles. Electronic Sensing of Fruit Ripeness Based on Volatile Gas Emissions. United States Department of Agriculture, 1994. http://dx.doi.org/10.32747/1994.7568762.bard.

Full text

Abstract:

An electronic sensory system for the evaluation of headspace volatiles was developed to determine fruit ripeness and quality. Two prototype systems were designed, constructed, and later modified. The first is an improved version of our original prototype electronic sniffer using a single head sensing unit for use as a single or paired unit placed on an individual fruit surface for applications in the field, lab, or industry. The second electronic sniffer utilizes a matrix of gas sensors, each selected for differential sensitivity to a range of volatile compounds. This system is more sophistica

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!