Relevant bibliographies by topics / Pahl and Beitz

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Pahl and Beitz'

Author: Grafiati
Published: 4 June 2021
Last updated: 7 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Pahl and Beitz.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Pahl and Beitz"

1

Khusnu Syahputra, Fathur Razaq, Akmal Suryadi, and Erlina Purnamawati. "PERANCANGAN MEJA BELAJAR MULTIFUNGSI ERGONOMIS DENGAN METODE PAHL AND BEITZ GUNA MENDUKUNG AKTIVITAS BELAJAR DI RUMAH." JUMINTEN 2, no. 4 (2021): 121–32. http://dx.doi.org/10.33005/juminten.v2i4.238.

Full text
Abstract:
Meja belajar multifungsi merupakan salah satu produk furniture berbentuk meja yang memiliki banyak fungsi dan dapat menampung banyak barang. Work from Home adalah istilah untuk bekerja di rumah. WFH terkadang membuat sebagian mahasiswa merasa tidak nyaman belajar di rumah karena fasilitas yang tidak memadai. Oleh karena itu, dalam penelitian ini ide suatu produk furniture dirancang untuk meningkatkan kenyamanan saat WFH. Berdasarkan permasalahan tersebut, perancangan ini menggunakan metode Pahl dan Beitz untuk menyelesaikannya. Prinsip kerja metode Pahl and Beitz adalah dalam perancangan sebua
APA, Harvard, Vancouver, ISO, and other styles
2

Puryani, Puryani, Laila Nafisah, Muhammad Shodiq Abdul Kanan, and Pradeas Ridiasa. "Perancangan Alat Pelorot Malam/ Lilin Menggunakan Metode Pahl and Beitz." Tekinfo: Jurnal Ilmiah Teknik Industri dan Informasi 7, no. 1 (2018): 12–18. http://dx.doi.org/10.31001/tekinfo.v7i1.364.

Full text
Abstract:
Industri Batik Plalangan merupakan UKM batik yang sudah diakui oleh Dinas Perindustrian Kabupaten Sleman. Batik yang dihasilkan dari UKM ini berupa batik cap dan batik tulis. Proses pembuatan batik di UKM ini masih sangat sederhana. Pada proses pembuatan motif di kain khususnya untuk batik tulis dengan cara menggelar kain di atas pola gambar di lantai kemudian dijiplak. Pada proses pelorotan malam masih menggunakan alat yang sederhana, yaitu menggunakan panci berisi air yang direbus di atas tungku kemudian selembar kain yang sudah dibatik dimasukkan ke dalam panci tersebut sambil diaduk menggu
APA, Harvard, Vancouver, ISO, and other styles
3

Zhang, Xiang, and De Zhi Chen. "A Conceptual Design Approach Generated by Integrating AD and TRIZ into the Conceptual Design Phase of SAPB." Advanced Materials Research 118-120 (June 2010): 977–81. http://dx.doi.org/10.4028/www.scientific.net/amr.118-120.977.

Full text
Abstract:
This paper analyzes the advantages and shortages of Systematic Approach of Pahl and Beitz (SAPB), Axiomatic Design (AD) and Theory of Inventive Problem Solving (TRIZ), and explores the possibilities of integration of complementary advantages as well. Integrate the Independence Axiom from AD and the principles of resolving contradictions into the conceptual design phase of SAPB, and at last, generate an approach of conceptual design.
APA, Harvard, Vancouver, ISO, and other styles
4

Thobarsi, Afrul Mufdi, Dira Ernawati, and Tranggono Tranggono. "PERANCANGAN PRODUK MULTIFUNCTION BOX YANG ERGONOMIS DENGAN MENGGUNAKAN METODE PAHL & BEITZ." JUMINTEN 1, no. 5 (2020): 1–12. http://dx.doi.org/10.33005/juminten.v1i5.162.

Full text
Abstract:
Furniture merupakan salah satu aspek produk yang dapat membantu manusia dalam memudahkan aktivitasnya Pada zaman milineaal saat ini manusia sangat kritis dalam memilih furniture yang di inginkan. Furniture diciptakan berbagai macam produk yang inovatif adalah agar dapat memenuhi target pasar yang dituju sesuai kebutuhan konsumen agar dapat melakukan semua aktivitas dengan mudah sesuai budget yang dikeluarkan untuk produk tersebut. Furniture yang difokuskan dalam perancangan ini, untuk menangani studi kasus yang peneliti angkat. Produk ini adalah sebuah kotak yang terbuat dari kayu yang dikombi
APA, Harvard, Vancouver, ISO, and other styles
5

Winata, Erlang Kardyansyah, and Akmal Suryadi. "PERANCANGAN KURSI TUNGGU YANG ERGONOMIS UNTUK LANSIA DENGAN METODE PAHL AND BEITZ PADA KLINIK XYZ SIDOARJO." JUMINTEN 1, no. 6 (2020): 61–72. http://dx.doi.org/10.33005/juminten.v1i6.130.

Full text
Abstract:
Manula sangat rentan terhadap penyakit, penyakit yang sering timbul pada tubuh manula merupakan penyakit persendian tulang. Penyakit pada sendi ini diakibatkan degenerasi atau kerusakan pada permukaan sendi-sendi tulang yang banyak dijumpai pada manula. Fasilitas Klinik XYZ sangat lah menunjang kegiatan untuk berobat atau pemeriksaan kondisi tubuh pasien, peningkatan jumlah pasien pada klinik tersebut juga harus di ikuti dengan penambahan fasilitas, salah satunya kursi tunggu untuk pasien. Namun pada kursi tunggu tersebut berbentuk 3 batang besi kemudian disatukan sehingga mengurangi tingkat k
APA, Harvard, Vancouver, ISO, and other styles
6

Hadi Putra, Yuan Ridho, and Akmal Suryadi. "PERANCANGAN MESIN PENGAYAK DAUN KERING BAHAN BAKU PUPUK ORGANIK DI CV. GLOBAL BUMI PUTRA DENGAN PENDEKATAN METODE PAHL AND BEITZ." JUMINTEN 2, no. 4 (2021): 85–96. http://dx.doi.org/10.33005/juminten.v2i4.293.

Full text
Abstract:
In the current condition of more advanced technology, all activities will be easy with the emergence of various new tools that have more usability than the basic capabilities of the previous tools. The more sophisticated the tool, the lighter the work done during the production process. CV. Global Bumi Putra, one of the organic fertilizer factories in the city of Jember, is still carrying out the sieving process in a traditional way. To increase the yield of dry leaf organic fertilizer, a dry leaf sieving machine was made. The method used to design this machine is the Pahl and Beitz method. Th
APA, Harvard, Vancouver, ISO, and other styles
7

Iqbal R Pamungkas, Bambang Sulaksono, Megara Munandar, Agri Suwandi, and M. Fathur Fajar. "Perancangan Mesin Tube Notcher Menggunakan Metode G. Pahl dan W. Beitz." Teknobiz : Jurnal Ilmiah Program Studi Magister Teknik Mesin 9, no. 2 (2019): 20–32. http://dx.doi.org/10.35814/teknobiz.v9i2.536.

Full text
Abstract:
Mesin tube notcher adalah mesin yang digunakan untuk memotong pipa besi dengan menghasilkan profil pada sisi potongnya yang berfungsi untuk memudahkan proses awal penyambungan pipa besi.Di industri menengah kebawah dibutuhkan mesin tube notcher yang dapat berkerja secara efesien dengan biaya murah.Perancangan ini bertujuan untuk memperoleh rancangan mesintube notcher dengan spesifikasi yang baik, agarrancangan mesin mudah digunakan, tahan lama dan terdapat data rancangan dalam bentuk gambar.Pada perancangan ini menggunakan metode G.Pahl dan W.Beitz meliputi pembuatan daftar persyaratan, strukt
APA, Harvard, Vancouver, ISO, and other styles
8

Suripto, Heri, and Saiful Anwar. "Desain dan Pengembangan Prototipe Alat Uji Pembangkit Listrik Tenaga Mikro Hidro dengan Back Flow Water System." JTERA (Jurnal Teknologi Rekayasa) 5, no. 2 (2020): 221. http://dx.doi.org/10.31544/jtera.v5.i2.2020.221-230.

Full text
Abstract:
Inovasi pengembangan Pembangkit Listrik Tenaga Mikro Hidro (PLTMH) terus dikembangkan mengingat kebutuhan akan energi listrik terus meningkat. Hal ini perlu didukung adanya media pembelajaran untuk mencari solusi alternatif permasalahan dalam mengatasi kebutuhan energi tersebut. Penelitian ini mendesain dan mengembangkan pembuatan PLTMH dengan back flow water system. Implementasi sistem berupa prototipe yang dapat digunakan sebagai media pembelajaran mahasiswa dan alat uji energi alternatif hidro. Metode perancangan dan manufaktur menggunakan metode Pahl & Beitz dan pengujian menggunakan m
APA, Harvard, Vancouver, ISO, and other styles
9

Mulyanto, Tri, Supriyono, and Rian Adi Gunawan. "PERANCANGAN MESIN PENGOLAH LIMBAH STYROFOAM DENGAN METODE SABUK PEMANAS." Jurnal ASIIMETRIK: Jurnal Ilmiah Rekayasa & Inovasi 2, no. 2 (2020): 107–14. http://dx.doi.org/10.35814/asiimetrik.v2i2.1406.

Full text
Abstract:
Styrofoam telah banyak digunakan sebagai kemasan atau pembungkus. Limbah produk-produk ini mengakibatkan polusi lingkungan karena sifatnya yang sulit terurai secara alami dan jika dalam penangannya tidak baik, maka akan menghasilkan zat berbahaya ke udara. Pada penelitian ini digunakan metode perancangan Pahl & Beitz untuk merancang mesin pengolah limbah styrofoam dengan metode sabuk pemanas, mesin akan dapat mengolah limbah styrofoam menjadi bahan baku produk berbahan plastik. Cara kerja mesin menggunakan prinsip ekstrusi, dimana styrofoam dicacah kemudian diekstrusi melalui sabuk pemanas
APA, Harvard, Vancouver, ISO, and other styles
10

Chen, Yao, Guo Yuan Zhang, Jun Chao Wei, Xiu Tian Yan, and Miao He. "Research and Implementation on Automatical Adjustment Method of Design Feature Model." Applied Mechanics and Materials 197 (September 2012): 750–54. http://dx.doi.org/10.4028/www.scientific.net/amm.197.750.

Full text
Abstract:
Traditional engineering design and realization typically follows a sequential pattern as described by many research publications such as French, Pahl and Beitz. These design methodologies face challenges when time is essence in product realization lifecycle. In contrast, as the design process of a product evolves，this new method incrementally creates machining feature model and realizes concurrent design feature and machining feature modeling based on an algorithm developed for local feature recognition. In addition, the method accelerated the determination of the area that require to be recog
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Pahl and Beitz"

1

Rothe, Arnd. "Decision support problems in the Pahl/Beitz design process." Thesis, Georgia Institute of Technology, 1994. http://hdl.handle.net/1853/18975.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Limaye, Ameya Shankar. "Design and Analysis of a Mask projection Micro Stereolithography System." Thesis, Georgia Institute of Technology, 2004. http://hdl.handle.net/1853/4943.

Full text
Abstract:
Mask Projection Microstereolithography (MPSLA) is an additive manufacturing process capable for fabricating true three-dimensional microparts and hence, holds promise as a potential micro-fabrication process for micro-machine components. With only a few MPSLA systems developed and studied so far, the research in this field is inchoate and experimental in nature. The process of curing a micropart using an MPSLA system has not been analytically modeled and no literature on process planning for MPSLA is available. In order to employ the MPSLA technology for microfabrication, it is necessary to m
APA, Harvard, Vancouver, ISO, and other styles
3

Revollo, Jimy Ramiro Magarinos. "Custos no processo de desenvolvimento de produtos seguindo a metodologia de Pahl & Beitz." reponame:Repositório Institucional da UFSC, 1989. https://repositorio.ufsc.br/xmlui/handle/123456789/157570.

Full text
Abstract:
Dissertação (mestrado) - Universidade Federal de Santa Catarina. Centro Tecnologico<br>Made available in DSpace on 2016-01-08T16:15:19Z (GMT). No. of bitstreams: 1 79524.pdf: 3653015 bytes, checksum: 893418d37897b5a8dcad84080895fd5b (MD5) Previous issue date: 1989<br>Em mercados cada vez mais competitivos, há necessidade de um maior rigor no controle e avaliação de todos os aspectos de custos no processo de desenvolvimento de produtos. Por isso, este trabalho, tomando como suporte conceitual a metodologia de Pahl & Beitz, identifica o contexto de mercado do produto e sistematiza procedimento
APA, Harvard, Vancouver, ISO, and other styles
4

Holmes, Jonathan Frank. "Designing a cost estimation method for the design of prototype systems." Thesis, Georgia Institute of Technology, 2012. http://hdl.handle.net/1853/43718.

Full text
Abstract:
There are unique cases when designing products where a prototype is required to demonstrate critical operations of a system or subsystem such that it will serve as a basis for how the design will move forward. These prototypes are oftentimes on the critical design path. Due to the fact there is typically some aspect of a prototype that is not well understood there can be a considerable amount of uncertainty associated with the amount of resources needed to design such a prototype. The goal of this thesis is to address how to systematically reduce uncertainty for the purpose of creating a robus
APA, Harvard, Vancouver, ISO, and other styles
5

Beetz, Jean-Paul [Verfasser], Eckhard [Akademischer Betreuer] Kirchner, and Sven [Akademischer Betreuer] Matthiesen. "Modelle und Methoden zur systematischen Entwicklung hygienegerechter Produkte / Jean-Paul Beetz ; Eckhard Kirchner, Sven Matthiesen." Darmstadt : Universitäts- und Landesbibliothek Darmstadt, 2018. http://d-nb.info/1174306408/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Seipold, Lisa [Verfasser], Paul [Akademischer Betreuer] Saftig, and Eric [Gutachter] Beitz. "The role of tetraspanins in the regulation of the A Disintegrin and Metalloprotease 10 (ADAM10) / Lisa Seipold ; Gutachter: Eric Beitz ; Betreuer: Paul Saftig." Kiel : Universitätsbibliothek Kiel, 2017. http://d-nb.info/1236287533/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Maier, Paul [Verfasser], Martin F. [Akademischer Betreuer] Sachenbacher, Michael [Akademischer Betreuer] Beetz, and Estaun Francisco Javier [Akademischer Betreuer] Esparza. "Model-based Plan Assessment for Autonomous Technical Systems / Paul Maier. Gutachter: Michael Beetz ; Martin F. Sachenbacher ; Francisco Javier Esparza Estaun. Betreuer: Martin F. Sachenbacher." München : Universitätsbibliothek der TU München, 2013. http://d-nb.info/1035274450/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Riegel-Betz, Ann-Kathrin [Verfasser], Bernhard [Akademischer Betreuer] Gaese, Bernhard [Gutachter] Gaese, and Paul [Gutachter] Dierkes. "Lateralisierte Verarbeitung von einfachen akustischen Reizen als Grundlage der Spracherkennung beim Menschen / Ann-Kathrin Riegel-Betz ; Gutachter: Bernhard Gaese, Paul Dierkes ; Betreuer: Bernhard Gaese." Frankfurt am Main : Universitätsbibliothek Johann Christian Senckenberg, 2020. http://d-nb.info/121957421X/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Pahl and Beitz"

1

Bender, Beate, and Kilian Gericke, eds. Pahl/Beitz Konstruktionslehre. Springer Berlin Heidelberg, 2021. http://dx.doi.org/10.1007/978-3-662-57303-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Feldhusen, Jörg, and Karl-Heinrich Grote, eds. Pahl/Beitz Konstruktionslehre. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-29569-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Pahl, Gerhard, Wolfgang Beitz, Jörg Feldhusen, and Karl-H. Grote. Pahl/Beitz Konstruktionslehre. Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/978-3-662-09186-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Dittenhafer, Miriam. History and genealogy of John Paul Dittenhafer, York, PA and many of his descendants with appendixes on Lewis, Shive, Stroman, Bentz, Myers, & Glatfelter. M. Dittenhafer, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Pahl/Beitz Konstruktionslehre. Springer-Verlag, 2005. http://dx.doi.org/10.1007/b137606.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Gericke, Kilian, and Beate Bender. Pahl/Beitz Konstruktionslehre: Methoden und Anwendung erfolgreicher Produktentwicklung. Springer Vieweg, 2020.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Feldhusen, Jörg, and Karl-Heinrich Grote. Pahl/Beitz Konstruktionslehre: Methoden und Anwendung erfolgreicher Produktentwicklung. Springer Vieweg, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Pahl, Gerhard, Wolfgang Beitz, Jörg Feldhusen, and Karl-Heinrich Grote. Pahl/Beitz Konstruktionslehre: Grundlagen erfolgreicher Produktentwicklung. Methoden und Anwendung. 7th ed. Springer, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Grote, K. H., Gerhard Pahl, Wolfgang Beitz, and Jörg Feldhusen. Pahl/Beitz Konstruktionslehre: Grundlagen erfolgreicher Produktentwicklung. Methoden und Anwendung. 6th ed. Springer, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Pahl and Beitz"

1

Kauf, Florian. "Kostenmanagement." In Pahl/Beitz Konstruktionslehre. Springer Berlin Heidelberg, 2020. http://dx.doi.org/10.1007/978-3-662-57303-7_21.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Feldhusen, Jörg, and Karl-Heinrich Grote. "Einleitung." In Pahl/Beitz Konstruktionslehre. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-29569-0_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Feldhusen, Jörg, and Karl-Heinrich Grote. "Methodik des schrittweisen Gestaltens." In Pahl/Beitz Konstruktionslehre. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-29569-0_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Feldhusen, Jörg, Karl-Heinrich Grote, and Alfred Neudörfer. "Grundregeln der Gestaltung." In Pahl/Beitz Konstruktionslehre. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-29569-0_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Pahl, Gerhard, Wolfgang Beitz†, Jörg Feldhusen, and Karl-Heinrich Grote. "Gestaltungsprinzipien." In Pahl/Beitz Konstruktionslehre. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-29569-0_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Pahl, Gerhard, Wolfgang Beitz†, Jörg Feldhusen, et al. "Gestaltungsrichtlinien." In Pahl/Beitz Konstruktionslehre. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-29569-0_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Feldhusen, Jörg, and Karl-Heinrich Grote. "Qualitätssicherung in der Produktentwicklung und Konstruktion." In Pahl/Beitz Konstruktionslehre. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-29569-0_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Feldhusen, Jörg, and Karl-Heinrich Grote. "Einleitung." In Pahl/Beitz Konstruktionslehre. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-29569-0_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Feldhusen, Jörg, Karl-Heinrich Grote, and Jörg Thon. "Grundsätzliche Überlegungen zur Rationalisierung." In Pahl/Beitz Konstruktionslehre. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-29569-0_16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Vietor, Thomas, and Carsten Stechert. "Produktarten zur Rationalisierung des Entwicklungs- und Konstruktionsprozesses." In Pahl/Beitz Konstruktionslehre. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-29569-0_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Pahl and Beitz"

1

Zeng, Sai, Edward J. Kim, Gregory M. Mocko, Angran Xiao, Russell Peak, and Farrokh Mistree. "Systematic Design Method for Information Modeling in CAD/CAE." In ASME 2003 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/detc2003/cie-48241.

Full text
Abstract:
As engineering systems are increasingly becoming more complex, the need for information models is growing accordingly. Extensive research is currently underway to develop engineering data management capabilities and to understand the role of information as a systems integrator. In order to develop information models more effectively, a systematic methodology is needed to better manage data and develop information models. In the area of CAD/CAE/CAM applications, an information gap exists between design models and analysis models. To this end, a multi-representational architecture (MRA) is prese
APA, Harvard, Vancouver, ISO, and other styles
2

Huang, Yuan Mao, and Chung-Cheng Liao. "On Evaluation Method During Conceptual Design." In ASME 2000 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/detc2000/dtm-14542.

Full text
Abstract:
Abstract This study proposes an evaluation method that integrates the existing ordinal, cardinal and matrix methods for decision making. Normalized values are recommended for the pairwise comparisons of evaluation items to determine the weighting factors. These values also assist in determining the weighting eigenvectors for alternatives of the potential products. Web diagrams are generated for all alternatives and their areas are compared to identify the most preferred one. The proposed method can reduce drawbacks of the Pahl and Beitz method and the Saaty method when the two most preferred a
APA, Harvard, Vancouver, ISO, and other styles
3

Chamberlain, Matthew K., Christopher B. Williams, F. Scott Cowan, and Farrokh Mistree. "Orchestrating Learning in a Graduate Engineering Design Course." In ASME 2001 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/detc2001/dtm-21705.

Full text
Abstract:
Abstract ME6101: Engineering Design is a graduate level course offered by The George W. Woodruff School of Mechanical Engineering at the Georgia Institute of Technology. The course is orchestrated to achieve three objectives, namely, to have students internalize the Pahl and Beitz design method, to help them “reinvent” the Pahl and Beitz design method to meet the challenges of the future, and most importantly, to learn how to continue learning about design. The course was given during the Fall 2000 semester to a class of nineteen students — most in their first semester of graduate school — in
APA, Harvard, Vancouver, ISO, and other styles
4

Tomiyama, Tetsuo, Paul Breedveld, and Herbert Birkhofer. "Teaching Creative Design by Integrating General Design Theory and the Pahl and Beitz Methodology." In ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/detc2010-28444.

Full text
Abstract:
The design methodology developed by Pahl and Beitz (P&amp;B) is one of the most widely taught design methodologies. However, this methodology is not easy to correctly exercise for non-experienced designers such as students. At TU Darmstadt in Germany, a method was developed to make students to realize the background philosophy of P&amp;B, to reduce misunderstanding and misuse of the method, and to help them to arrive at creative design. At TU Delft in the Netherlands, an experienced designer who works on designing mechanical medical devices developed a method to generate creative designs. Alth
APA, Harvard, Vancouver, ISO, and other styles
5

Ja¨nsch, Judith, and Menachem P. Weiss. "Evaluation and Similarity of Systematic Methods for the Conceptual Design of New Products." In ASME 2008 9th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2008. http://dx.doi.org/10.1115/esda2008-59394.

Full text
Abstract:
In the past the design of a new product used to be performed by intuition and by expertise based on previous successes, and even better on previous failures. When designing a product, a young engineer was fully dependent on the guidance, inspection and help of his superior in the design office. Such guidance was essential for long periods. In the second half of the 20th century systematic design methods have been developed, with the aim that even a novice designer will be able to devise a novel good product. The methods were developed in two very different trends, one in the USSR by G. Altshul
APA, Harvard, Vancouver, ISO, and other styles
6

Schuster, Helmut R., and Anton H. Basson. "A Software “Design Assistant” for Specification Development." In ASME 1996 Design Engineering Technical Conferences and Computers in Engineering Conference. American Society of Mechanical Engineers, 1996. http://dx.doi.org/10.1115/96-detc/dac-1039.

Full text
Abstract:
Abstract The Design Assistant is primarily a computer-based tool for teaching a systematic mechanical design procedure and improving a novice designer’s productivity while doing so. Provision is made for recording experienced designers’ intent for education through case studies. Record is kept of the relationships amongst design decisions to ensure consistency. QFD and techniques suggested by Pahl and Beitz are adapted for the specification development procedure employed in the Design Assistant. The implementation details of the Windows-based software, including ease of use, hypertext-based he
APA, Harvard, Vancouver, ISO, and other styles
7

Dietz, Timothy P., and Farrokh Mistree. "Integrated Pahl and Beitz and the Theory of Inventive Problem Solving for the Conceptual Design of Multi-Domain Systems." In ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/detc2009-87311.

Full text
Abstract:
A key challenge facing designers creating innovative products is concept generation in conceptual design. Conceptual design can be more effective when the design space is broad and accelerated by including problem solving and solution triggering tools in its structure. The design space can be broadened by using an integrated design of product and material concepts approach. In this approach, structured analogy is used to transfer underlying principles from a solution suitable in one domain (i.e., product or mechanical domain) to an analogous solution in another domain (i.e., materials domain).
APA, Harvard, Vancouver, ISO, and other styles
8

Malmqvist, Johan, Roger Axelsson, and Mikael Johansson. "A Comparative Analysis of the Theory of Inventive Problem Solving and the Systematic Approach of Pahl and Beitz." In ASME 1996 Design Engineering Technical Conferences and Computers in Engineering Conference. American Society of Mechanical Engineers, 1996. http://dx.doi.org/10.1115/96-detc/dtm-1529.

Full text
Abstract:
Abstract This paper presents a comparative analysis of two design methodologies; the Theory of Inventive Problem-Solving (TIPS) and the systematic approach of Pahl and Beitz (SAPB). The methodologies are compared with respect to a number of aspects; similarities and differences are highlighted. It is then suggested that a more powerful methodology may result if the methodologies are unified and that such a unification should use SAPB as an underlying design process model being complemented by TIPS elements at certain points. This is because the SAPB has a wider scope as a design process model,
APA, Harvard, Vancouver, ISO, and other styles
9

Renz, Julian Steffen, and Andrew Olewnik. "A Pilot Study of Customer Requirement Derivation Methods Among Engineering Students." In ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/detc2015-47584.

Full text
Abstract:
It is desirable for designers to use formal representations when interpreting customer need statements. However, to date there is no methodology that systematically evaluates the quality of information generated by a specific customer requirement derivation (CRD) method. This work develops and applies an evaluation framework that compares a traditional method rooted in work from Pahl and Beitz, and Ulrich and Eppinger, with approaches derived from affordance modeling literature. The framework is based on eight metrics derived from extant literature. Results of a pilot study involving sophomore
APA, Harvard, Vancouver, ISO, and other styles
10

Ahrens, Gritt. "A Method for the Evaluation of the Suitability of Specific Product Development Processes for Parallelization." In ASME 1997 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/detc97/eim-3716.

Full text
Abstract:
Abstract A method for the parallelization of the working steps of an existing product development process is discribed. The procedure which is based on the design methodology as described by Pahl and Beitz provides a framework of rules and guidelines which enable the project leader to judge in which phase of a development and design process the introduction of Simultaneous Engineering is profitable. In a case study of a German manufacturer of tubomachines and its subcontractor the developed method is validated by the example of the development and design process of a geared compressors. The re
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography