Log in

Relevant bibliographies by topics / Paper-based materials / Journal articles

To see the other types of publications on this topic, follow the link: Paper-based materials.

Journal articles on the topic 'Paper-based materials'

Author: Grafiati

Published: 4 June 2021

Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Paper-based materials.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Hladíková, Z., K. Kejlová, J. Sosnovcová, D. Jírová, A. Vavrouš, A. Janoušek, M. Syčová, and V. Špelina. "Microbial contamination of paper-based food contact materials with different contents of recycled fiber." Czech Journal of Food Sciences 33, No. 4 (June 3, 2016): 308–12. http://dx.doi.org/10.17221/645/2014-cjfs.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Gao, H., and G. C. Barber. "Microcontact Model for Paper-Based Wet Friction Materials." Journal of Tribology 124, no. 2 (June 12, 2001): 414–19. http://dx.doi.org/10.1115/1.1430674.

Full text

Abstract:

This paper is focused on the real area of contact for paper-based wet friction materials during the engagement of wet clutches. The deformation of the wet friction material is identified as elastic during the engagement. A microcontact model is proposed considering both surface roughness and skewness. A Weibull density distribution is employed in the model rather than a Gaussian density distribution. This model is compared with the Greenwood-Williamson (GW) model for the cases of positive skewness, zero skewness and negative skewness. The real areas of contact of new, run-in and glazed wet friction materials were investigated using this microcontact model. Both surface roughness and skewness were found to have a great effect on the real area of contact.

APA, Harvard, Vancouver, ISO, and other styles

3

Down, Michael P., Christopher W. Foster, Xiaobo Ji, and Craig E. Banks. "Pencil drawn paper based supercapacitors." RSC Advances 6, no. 84 (2016): 81130–41. http://dx.doi.org/10.1039/c6ra18499e.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Takeyama, Saburo. "Research and Development Trends of Paper-based Packaging Materials." JAPAN TAPPI JOURNAL 50, no. 6 (1996): 865–73. http://dx.doi.org/10.2524/jtappij.50.865.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Zhao, Degang. "18.1: Invited Paper: GaN‐based materials and laser diodes." SID Symposium Digest of Technical Papers 52, S1 (February 2021): 121. http://dx.doi.org/10.1002/sdtp.14400.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Mozhou Sha, Mozhou Sha, Juan Liu Juan Liu, Xin Li Xin Li, and Yongtian Wang Yongtian Wang. "Holographic display based on compressive sensing (Invited Paper)." Chinese Optics Letters 12, no. 6 (2014): 060023–60026. http://dx.doi.org/10.3788/col201412.060023.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Matias, M. L., D. Nunes, A. Pimentel, S. H. Ferreira, R. Borda d’Agua, M. P. Duarte, E. Fortunato, and R. Martins. "Paper-Based Nanoplatforms for Multifunctional Applications." Journal of Nanomaterials 2019 (April 4, 2019): 1–16. http://dx.doi.org/10.1155/2019/6501923.

Full text

Abstract:

In this work, zinc oxide (ZnO) and titanium dioxide (TiO2) nanostructures were grown on different cellulose paper substrates, namely, Whatman, office, and commercial hospital papers, using a hydrothermal method assisted by microwave irradiation. Pure ZnO and TiO2 nanostructures were synthesized; however, the growth of TiO2 above ZnO was also investigated to produce a uniform heterostructure. Continuous ZnO nanorod arrays were grown on Whatman and hospital papers; however, on office paper, the formation of nanoplates originating nanoflower structures could be observed. TiO2 nanoparticles homogeneously covered all the substrates, in some conditions forming uniform TiO2 films. Structural characterization was carried out by scanning electron microscopy (SEM) coupled with energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), and Raman spectroscopy. The optical characterization of all the materials was carried out. The produced materials were investigated for multifunctional applications, like photocatalyst agents, bacterial inactivators, and ultraviolet (UV) sensors. To evaluate the photocatalytic activity under UV and solar radiations, rhodamine B was the model-test contaminant indicator and the best photocatalytic activity was achieved with Whatman paper. Hospital paper with TiO2 nanoparticles showed significant antibacterial properties against Staphylococcus aureus. ZnO-based UV sensors demonstrated a responsivity of 0.61 μA W-1.

APA, Harvard, Vancouver, ISO, and other styles

8

Lu, Zhao Qing, Qiang Xu, Zhi Jie Wang, and Zhen Wu. "Effect of Properties of Polyimide Fiber Paper-Based Materials by Different Paper-Making Process." Advanced Materials Research 631-632 (January 2013): 603–7. http://dx.doi.org/10.4028/www.scientific.net/amr.631-632.603.

Full text

Abstract:

Polyimide fibers and polyamide acid fibers was used as main materials to produce Polyimide fiber paper. A certain amount of PEO and aramid pulp was added and the sheet was treated by immersion and hot pressing in specified process. The experimental results showed that when the dosage of PEO and aramid pulp were 0.06% and 6% respectively, the sheet tended to present more excellent strength properties and electrical performance compared with sheet using single polyimide fibers as the main fiber materials.

APA, Harvard, Vancouver, ISO, and other styles

9

Zhong, Z. W., Z. P. Wang, and G. X. D. Huang. "Investigation of wax and paper materials for the fabrication of paper-based microfluidic devices." Microsystem Technologies 18, no. 5 (March 13, 2012): 649–59. http://dx.doi.org/10.1007/s00542-012-1469-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Zhang, Yan, Lina Zhang, Kang Cui, Shenguang Ge, Xin Cheng, Mei Yan, Jinghua Yu, and Hong Liu. "Paper-Based Electronics: Flexible Electronics Based on Micro/Nanostructured Paper (Adv. Mater. 51/2018)." Advanced Materials 30, no. 51 (December 2018): 1870394. http://dx.doi.org/10.1002/adma.201870394.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Gao, Xiang, Liang Huang, Bo Wang, Dingfeng Xu, Junwen Zhong, Zhimi Hu, Lina Zhang, and Jun Zhou. "Natural Materials Assembled, Biodegradable, and Transparent Paper-Based Electret Nanogenerator." ACS Applied Materials & Interfaces 8, no. 51 (December 14, 2016): 35587–92. http://dx.doi.org/10.1021/acsami.6b12913.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Reinholt, S. J., A. Sonnenfeldt, A. Naik, M. W. Frey, and A. J. Baeumner. "Developing new materials for paper-based diagnostics using electrospun nanofibers." Analytical and Bioanalytical Chemistry 406, no. 14 (September 26, 2013): 3297–304. http://dx.doi.org/10.1007/s00216-013-7372-5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Coe-Sullivan, Seth. "14.2: Invited Paper : Cadmium- and Indium-Based Quantum-Dot Materials." SID Symposium Digest of Technical Papers 46, no. 1 (June 2015): 170–72. http://dx.doi.org/10.1002/sdtp.10290.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Rath, Tanmoy, and Patit Paban Kundu. "Reduced graphene oxide paper based nanocomposite materials for flexible supercapacitors." RSC Advances 5, no. 34 (2015): 26666–74. http://dx.doi.org/10.1039/c5ra00563a.

Full text

Abstract:

A flexible supercapacitor is developed by combining reduced graphene oxide (rGO), cellulose and RTIL. The device exhibited good electrochemical performance with an energy density of 6.28 W h kg⁻¹ at a power density of 1.32 kW kg⁻¹ in a 6 M KOH electrolyte.

APA, Harvard, Vancouver, ISO, and other styles

15

Tsybuk, I. O., S. V. Burinskii, and A. A. Lysenko. "Paper Materials Based on Heat Resistant and Flame Resistant Fiber." Fibre Chemistry 48, no. 3 (September 2016): 246–48. http://dx.doi.org/10.1007/s10692-016-9777-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Cho, Hak-Rae, Youngwan Je, and Koo-Hyun Chung. "Assessment of Wear Characteristics of Paper-Based Wet Friction Materials." International Journal of Precision Engineering and Manufacturing 19, no. 5 (May 2018): 705–11. http://dx.doi.org/10.1007/s12541-018-0084-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Selvakumar, Bhavadharini, and Arunkumar Kathiravan. "Sensory materials for microfluidic paper based analytical devices - A review." Talanta 235 (December 2021): 122733. http://dx.doi.org/10.1016/j.talanta.2021.122733.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Wang, Yijen. "Engagement in PC-based, smartphone-based, and paper-based materials: Learning vocabulary through Chinese Stories." Technology in Language Teaching and Learning 2, no. 1 (April 30, 2019): 3–21. http://dx.doi.org/10.29140/tltl.v2n1.319.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Xie, Jingjin, Qiang Chen, Poornima Suresh, Subrata Roy, James F. White, and Aaron D. Mazzeo. "Paper-based plasma sanitizers." Proceedings of the National Academy of Sciences 114, no. 20 (May 1, 2017): 5119–24. http://dx.doi.org/10.1073/pnas.1621203114.

Full text

Abstract:

This work describes disposable plasma generators made from metallized paper. The fabricated plasma generators with layered and patterned sheets of paper provide a simple and flexible format for dielectric barrier discharge to create atmospheric plasma without an applied vacuum. The porosity of paper allows gas to permeate its bulk volume and fuel plasma, while plasma-induced forced convection cools the substrate. When electrically driven with oscillating peak-to-peak potentials of ±1 to ±10 kV, the paper-based devices produced both volume and surface plasmas capable of killing microbes. The plasma sanitizers deactivated greater than 99% of Saccharomyces cerevisiae and greater than 99.9% of Escherichia coli cells with 30 s of noncontact treatment. Characterization of plasma generated from the sanitizers revealed a detectable level of UV-C (1.9 nW⋅cm−2⋅nm−1), modest surface temperature (60 °C with 60 s of activation), and a high level of ozone (13 ppm with 60 s of activation). These results deliver insights into the mechanisms and suitability of paper-based substrates for active antimicrobial sanitization with scalable, flexible sheets. In addition, this work shows how paper-based generators are conformable to curved surfaces, appropriate for kirigami-like “stretchy” structures, compatible with user interfaces, and suitable for sanitization of microbes aerosolized onto a surface. In general, these disposable plasma generators represent progress toward biodegradable devices based on flexible renewable materials, which may impact the future design of protective garments, skin-like sensors for robots or prosthetics, and user interfaces in contaminated environments.

APA, Harvard, Vancouver, ISO, and other styles

20

Zhong, Haizheng. "Paper No S10.1: Emerging Materials and Processes for Quantum Dots based Display Technology (Invited Paper)." SID Symposium Digest of Technical Papers 46, S1 (September 2015): 42. http://dx.doi.org/10.1002/sdtp.10519.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Deshwal, Gaurav Kr, Narender Raju Panjagari, and Tanweer Alam. "An overview of paper and paper based food packaging materials: health safety and environmental concerns." Journal of Food Science and Technology 56, no. 10 (July 23, 2019): 4391–403. http://dx.doi.org/10.1007/s13197-019-03950-z.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Zhang, Zidong, Yaman Zhao, Guohua Fan, Wenjin Zhang, Yao Liu, Jiurong Liu, and Runhua Fan. "Paper-based flexible metamaterial for microwave applications." EPJ Applied Metamaterials 8 (2021): 6. http://dx.doi.org/10.1051/epjam/2020016.

Full text

Abstract:

Metamaterial has become a hotspot in many research fields, including electromagnetism, thermodynamics and mechanics, as it can offers additional design freedom for material to obtain novel properties. Especially for the electromagnetic devices, various interesting electromagnetic properties which cannot be found in nature materials can be realized, such as negative refraction, invisible cloak, etc. Herein, we provide an overview of paper-based metamaterial for microwave application. This work reviews the metamaterial realized on paper substrate, including the fabrication techniques, application fields, as well as the outlook on future directions of the paper-based metamaterial for the readership.

APA, Harvard, Vancouver, ISO, and other styles

23

Huang, Xiao Li, Jia Zheng, Ying Wang, and Xiang Rui Kong. "Analysis of Nano Luminescent Materials and Devices Based on Paper Intelligence." Advanced Materials Research 774-776 (September 2013): 840–43. http://dx.doi.org/10.4028/www.scientific.net/amr.774-776.840.

Full text

Abstract:

Based on papers collected by Conference Proceedings Citation Index – Science (CPCI-S) database from 1989-2011, this paper investigates and analysis the innovation status and development trends of Nano luminescent materials and devices through the quantitative analysis of paper distribution in the year, the hot R&D field, affiliations and the conference sources in hope of providing an objective statistic reference for future academic researches and innovation development．

APA, Harvard, Vancouver, ISO, and other styles

24

FUJII, Tomoyuki, Keiichiro TOHGO, Yoshinobu SHIMAMURA, Jun SHIBATA, Yutao WANG, Yoichi ITO, and Nobuyuki KATAYAMA. "Shear-Compressive Strength and Fatigue Properties of Paper-Based Friction Materials." TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A 79, no. 797 (2013): 1–12. http://dx.doi.org/10.1299/kikaia.79.1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Malik, H. I., M. Y. Ismail, S. R. Masrol, and Sharmiza Adnan. "Reflection phase analysis of reflectarray antenna based on paper substrate materials." Indonesian Journal of Electrical Engineering and Computer Science 13, no. 2 (February 1, 2019): 766. http://dx.doi.org/10.11591/ijeecs.v13.i2.pp766-772.

Full text

Abstract:

<span>This article presents an analysis of reflection loss and reflection phase behavior of a novel microstrip reflectarray antenna, embedded on paper substrate material. Two different paper substrates were first analyzed for dielectric material properties. A detailed analysis of scattering parameters of rectangular patch element with variable substrate heights has been carried out. Rectangular patch elements fabricated using adhesive copper tape over the paper substrate, show that a wide bandwidth is achieved compared to available conventional substrate materials. Fabricated patch elements over paper substrate material show a broadband frequency response of 340 and 290 MHz. It has also been demonstrated that the measured reflection phase ranges for both the substrate cover 310º and 294º at low phase gradients of 0.12 and 0.24 º/MHz respectively.</span>

APA, Harvard, Vancouver, ISO, and other styles

26

Oloyede, Omobolanle O., and Stella Lignou. "Sustainable Paper-Based Packaging: A Consumer’s Perspective." Foods 10, no. 5 (May 10, 2021): 1035. http://dx.doi.org/10.3390/foods10051035.

Full text

Abstract:

Over the last two decades, there has been growing interest from all stakeholders (government, manufacturers, and consumers) to make packaging more sustainable. Paper is considered one of the most environmentally friendly materials available. A qualitative study investigating consumers’ expectations and opinions of sustainable paper-based packaging materials was conducted where 60 participants took part in focus group sessions organized in two stages. In the first stage, participants expressed their opinions about currently available packages in the market and their expectations about a sustainable packaging material. In the second stage of the study, they evaluated five paper-based prototype packages for two product categories (biscuits and meat). Too much plastic and over-packaging were the key issues raised for current packages. Price and quality were the main driving forces for consumers’ purchase intent. While participants were impressed by the sustainable nature of the prototypes, the design did not necessarily meet their expectations, and they were not willing to pay more for a sustainable package. The key message that emerged from the discussions was the “3Rs”—Reduce, Reuse, and Recycle”—which should be the main points to consider when designing a sustainable packaging.

APA, Harvard, Vancouver, ISO, and other styles

27

Li, Kun Peng, Chuan Shan Zhao, Chao Jun Wu, Yi Fei Jiang, and Wen Jia Han. "Influence of Modified Carbon Fiber on Properties of Paper Based Friction Materials." Materials Science Forum 909 (November 2017): 207–12. http://dx.doi.org/10.4028/www.scientific.net/msf.909.207.

Full text

Abstract:

The paper adopts modified carbon fiber with Meldrum's acid and silane coupling agent (KH-550), then add the modified carbon fiber to the paper based friction materials. The paper aims to explore the changes of modified carbon fiber in its surface structure and properties by electron microscopy and infrared spectral analysis, and the effect of anionic microparticle forming retention aid system comprised of lithium soapstone-cationic polyacrylamide (CPAM) on mechanical properties and retention of paper based friction materials. Compared with the addition of unmodified carbon fiber to paper based friction materials, the addition of modified carbon fiber with Meldrum's acid, silane coupling agent, Meldrum's acid and silane coupling agent enhance the tensile strength of paper based friction materials. The tensile index of paper based friction materials was separately enhanced by 64.87 %, 91.38 % and 28.88 %. Compared with the paper based friction materials without the anionic microparticle forming retention aid system, the basis weight of paper based friction materials increased by 13.97 %.

APA, Harvard, Vancouver, ISO, and other styles

28

Chen Su, Chen Su, Xinxing Xia Xinxing Xia, Haifeng Li Haifeng Li, Xu Liu Xu Liu, Cuifang Kuang Cuifang Kuang, Jun Xia Jun Xia, and Baoping Wang Baoping Wang. "A penetrable interactive 3D display based on motion recognition (Invited Paper)." Chinese Optics Letters 12, no. 6 (2014): 060007–60010. http://dx.doi.org/10.3788/col201412.060007.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Stefan-van Staden, Raluca-Ioana, Iuliana Moldoveanu, Carmen Cristina Surdu-Bob, Marius Badulescu, and Jacobus Frederick van Staden. "Carbon Modified Paper Based Sensors." Journal of The Electrochemical Society 162, no. 14 (2015): B360—B362. http://dx.doi.org/10.1149/2.0831514jes.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Wang, Hui, Sergei I. Vagin, Bernhard Rieger, and Alkiviathes Meldrum. "An Ultrasensitive Fluorescent Paper-Based CO2 Sensor." ACS Applied Materials & Interfaces 12, no. 18 (April 22, 2020): 20507–13. http://dx.doi.org/10.1021/acsami.0c03405.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Lin, Yang, Dmitry Gritsenko, Qian Liu, Xiaonan Lu, and Jie Xu. "Recent Advancements in Functionalized Paper-Based Electronics." ACS Applied Materials & Interfaces 8, no. 32 (August 8, 2016): 20501–15. http://dx.doi.org/10.1021/acsami.6b04854.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Wang, Yan, Hong Guo, Jin-ju Chen, Enrico Sowade, Yu Wang, Kun Liang, Kyle Marcus, Reinhard R. Baumann, and Zhe-sheng Feng. "Paper-Based Inkjet-Printed Flexible Electronic Circuits." ACS Applied Materials & Interfaces 8, no. 39 (September 20, 2016): 26112–18. http://dx.doi.org/10.1021/acsami.6b06704.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Sadri, Behnam, Debkalpa Goswami, Marina Sala de Medeiros, Aniket Pal, Beatriz Castro, Shihuan Kuang, and Ramses V. Martinez. "Wearable and Implantable Epidermal Paper-Based Electronics." ACS Applied Materials & Interfaces 10, no. 37 (August 24, 2018): 31061–68. http://dx.doi.org/10.1021/acsami.8b11020.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Gao, Kezheng, Ziqiang Shao, Xue Wu, Xi Wang, Yunhua Zhang, Wenjun Wang, and Feijun Wang. "Paper-based transparent flexible thin film supercapacitors." Nanoscale 5, no. 12 (2013): 5307. http://dx.doi.org/10.1039/c3nr00674c.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Zhang, Yan, Lina Zhang, Kang Cui, Shenguang Ge, Xin Cheng, Mei Yan, Jinghua Yu, and Hong Liu. "Flexible Electronics Based on Micro/Nanostructured Paper." Advanced Materials 30, no. 51 (July 31, 2018): 1801588. http://dx.doi.org/10.1002/adma.201801588.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Bach, U., D. Corr, D. Lupo, F. Pichot, and M. Ryan. "Nanomaterials-Based Electrochromics for Paper-Quality Displays." Advanced Materials 14, no. 11 (June 5, 2002): 845. http://dx.doi.org/10.1002/1521-4095(20020605)14:11<845::aid-adma845>3.0.co;2-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Kim, Jaehwan. "Remotely-Driven Smart Actuator Based on Electro-Active Paper(International Workshop on Smart Materials and Structural Systems, W03 Jointly organized by Material & Processing Division, Material & Mechanics Division, Dynamics & Control Division and Space Engineering Division.)." Reference Collection of Annual Meeting 2004.8 (2004): 286–87. http://dx.doi.org/10.1299/jsmemecjsm.2004.8.0_286.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Kim, J., W. Jung, C. H. Jo, J. Shelton, and W. Craft. "Mechanical properties of cellulose-based electro-active paper." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 222, no. 4 (April 1, 2008): 577–83. http://dx.doi.org/10.1243/09544062jmes652.

Full text

Abstract:

Mechanical properties of cellulose-based electro-active paper (EAPap) are characterized in this work. Cellulose-based EAPap has been studied as a potential actuator concept, as a result of its low actuation voltage, lightweight, low power consumption, biodegradability and low cost. EAPap is made from cellulose paper, coated with thin electrically conducting electrodes. This EAPap shows a reversible and reproducible bending movement as well as a longitudinal displacement under electric field excitation. However, the EAPap is a complex anisotropic material, which has not been extensively characterized. It is important to have extended property data for EAPap so that the actuator performance can be optimized, and this requires additional material testing. Our material test results show that EAPap has two distinct elastic constants. The initial Young's modulus of EAPap is in the range of 4–9 GPa, which is higher than other polymer materials. This modulus is also orientation dependent, which may be associated with the piezoelectricity of the EAPap materials. Another important property is that the dynamically induced mechanical strains of these materials exhibit linear creep behaviour as confirmed by constant stress and low frequency cyclic loading tests. From scanning electron microscope investigations, cellulose EAPap exhibits a layered, anisotropic cellulose macromolecular structure that exhibits both elastic and plastic deformations, as well as substantial temperature and humidity dependence.

APA, Harvard, Vancouver, ISO, and other styles

39

Baldin, Alice, Andrea Gorassini, Elisabetta Princi, Silvia Vicini, and Antonio Zappalà. "Effects of artificial weathering on the mechanical properties of paper-based materials consolidated with polymeric materials." Journal of Applied Polymer Science 112, no. 6 (June 15, 2009): 3529–36. http://dx.doi.org/10.1002/app.30109.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Hospodarova, Viola, Nadezda Stevulova, Jaroslav Briancin, and Katarina Kostelanska. "Investigation of Waste Paper Cellulosic Fibers Utilization into Cement Based Building Materials." Buildings 8, no. 3 (March 14, 2018): 43. http://dx.doi.org/10.3390/buildings8030043.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Sangrutsamee, Vachira, Panya Srichandr, and Nuchthana Poolthong. "Re-Pulped Waste Paper-Based Composite Building Materials with Low Thermal Conductivity." Journal of Asian Architecture and Building Engineering 11, no. 1 (May 2012): 147–51. http://dx.doi.org/10.3130/jaabe.11.147.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Kopacic, Samir, Andrea Walzl, Armin Zankel, Erich Leitner, and Wolfgang Bauer. "Alginate and Chitosan as a Functional Barrier for Paper-Based Packaging Materials." Coatings 8, no. 7 (July 3, 2018): 235. http://dx.doi.org/10.3390/coatings8070235.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Princi, Elisabetta, Silvia Vicini, Enrico Marsano, and Vincenzo Trefiletti. "Influence of the artificial weathering on thermal stability of paper-based materials." Thermochimica Acta 468, no. 1-2 (February 2008): 27–34. http://dx.doi.org/10.1016/j.tca.2007.11.019.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Rahneshin, Vahid, Milad Farzad, Shima Azizi, and Balaji Panchapakesan. "Versatile high-performance inkjet-printed paper photo-actuators based on 2D materials." Nanotechnology 31, no. 2 (October 14, 2019): 025708. http://dx.doi.org/10.1088/1361-6528/ab4776.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Yao, Yao, and Jianfeng Ping. "Recent advances in graphene-based freestanding paper-like materials for sensing applications." TrAC Trends in Analytical Chemistry 105 (August 2018): 75–88. http://dx.doi.org/10.1016/j.trac.2018.04.014.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

FUJII, Tomoyuki, Keiichiro TOHGO, Yoshinobu SHIMAMURA, Takuya WADA, Yoichi ITO, and Nobuyuki KATAYAMA. "Influence of Constituents on Quasi-Static Strength of Paper-Based Friction Materials." TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A 77, no. 782 (2011): 1712–22. http://dx.doi.org/10.1299/kikaia.77.1712.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Zhang, Xu-Long, Yin Liu, Qin Zou, and Ji-De Wang. "Determination of 22 Contaminants in Paper Packaging Materials Based on Gas Chromatography." Energy and Environment Focus 3, no. 3 (September 1, 2014): 287–91. http://dx.doi.org/10.1166/eef.2014.1099.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Hattori, Yasuhisa, and Takahisa Kato. "Frictional Vibration of Paper-Based Friction Materials. Effects of Deformation and Porosity." Transactions of the Japan Society of Mechanical Engineers Series C 61, no. 589 (1995): 3693–701. http://dx.doi.org/10.1299/kikaic.61.3693.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Miles, Elaine, and Ann Roberts. "Non-destructive speckle imaging of subsurface detail in paper-based cultural materials." Optics Express 17, no. 15 (July 6, 2009): 12309. http://dx.doi.org/10.1364/oe.17.012309.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Pang, Wenlong, Ruisen Shi, Jun Wang, Qingwei Ping, Xueru Sheng, Na Li, and Jian Zhang. "Research on Resin Used for Impregnating Polyimide Fiber Paper-Based Composite Materials." Materials 14, no. 17 (August 28, 2021): 4909. http://dx.doi.org/10.3390/ma14174909.

Full text

Abstract:

In this paper, a resin with high adhesion, easy curing, good flexibility, and high temperature resistance was prepared from polyimide fiber paper. First, in order to improve the toughness and curability of impregnating resin, epoxy resin was modified by addition of vinyl silicone resin. Subsequently, ternary resin with high temperature stability was obtained by polyimide resin addition. Among the investigated conditions, the optimal additive amount of vinyl silicone resin and polyimide resin was 30% and 5%, respectively. The prepared ternary resin has better toughness, crosslinking degree, high temperature stability (5% mass loss at 339.2 °C) and no obvious glass transition at high temperature. Finally, the polyimide fiber paper-based composite material was impregnated with modified epoxy resin and ternary resin, respectively. The results shows that the paper-based composite material impregnated with modified epoxy resin has a better fiber bonding degree, a smooth surface, and contact angle could reach up to 148.71°. Meanwhile, the paper-based composite material impregnated with ternary resin has good high temperature resistance, and the tensile index of the paper-based composite material could reach up to 35.1 N·m/g at 200 °C.

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!