Log in

Relevant bibliographies by topics / Paper coatings Paper coatings Paper finishing

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers

Academic literature on the topic 'Paper coatings Paper coatings Paper finishing'

Author: Grafiati

Published: 4 June 2021

Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Paper coatings Paper coatings Paper finishing.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Paper coatings Paper coatings Paper finishing"

1

Hou, Feng Yan, Ian Mardon, Jun Zhe Dong, and Chris Goode. "Innovative Surface Technologies to Create Protective Functional Coatings on Light Metal Alloys." Key Engineering Materials 876 (February 2021): 31–38. http://dx.doi.org/10.4028/www.scientific.net/kem.876.31.

Full text

Abstract:

Weight reduction in automotive and aerospace components can improve energy efficiency, reduce emissions, and increase performance. The adoption of light metals such as aluminium, magnesium and titanium alloys, is essential to these performance improvements; however, these alloys require protective surface coatings to prevent corrosion and resulting mechanical failures during service life. Traditional protective coatings for light-weight materials can be costly in terms of energy, raw materials, and environmental sustainability. New durable coating approaches are required to allow light-weight

APA, Harvard, Vancouver, ISO, and other styles

2

Vopat, Tomas, Martin Sahul, Marián Haršáni, Tomáš Zlámal, and Ondrej Vortel. "Observation of Coating-Substrate Adhesion of Nanocomposite Hard Coating with Respect to the Deposition Parameters and Surface Finishing of Cemented Carbide Substrate." Materials Science Forum 990 (May 2020): 231–38. http://dx.doi.org/10.4028/www.scientific.net/msf.990.231.

Full text

Abstract:

The paper deals with the issue of coating and surface finishing with edge preparation prior to the coating. Nanocomposite AlCrSiN hard coatings were deposited on WC-Co substrates with a negative substrate bias voltage in range of-80 to-120 V using cathodic arc evaporation system. The effect of variation in the bias voltage on the coating-substrate adhesion and nanohardness was investigated. The maximum nanohardness of coating was 37.7 ± 1.5 GPa with the good coating-substrate adhesion. Static Mercedes indentation test was performed on a Rockwell-type hardness tester. The indents were studied b

APA, Harvard, Vancouver, ISO, and other styles

3

Ju, Hong, Tian Shu Peng, and Yan Li. "Acridine as Effective Corrosion Inhibitor for Hot Dipped Coatings on Steels in Diluted HCl Solution." Advanced Materials Research 79-82 (August 2009): 1035–38. http://dx.doi.org/10.4028/www.scientific.net/amr.79-82.1035.

Full text

Abstract:

The environmental and health hazards associated with chromium-containing solution have aroused wide public concern, so attempts have been made to find alternatives for metal finishing. In the present paper, inhibition effect of acridine on corrosion of hot dipped Zn and Zn-Al alloy coatings on steels in diluted hydrochloric acid was investigated using weight loss test, electrochemical measurement, and quantum chemistry analysis. The results showed that inhibition efficiency increased with inhibitor concentration, and the highest inhibition efficiency was up to 99%. And acridine adsorbed on coa

APA, Harvard, Vancouver, ISO, and other styles

4

Chen, Feng, Jun Shen, and Xinghua Xia. "Effect of the surface finishing methods on particleboard volatile organic compounds and formaldehyde emission." BioResources 15, no. 3 (2020): 5450–63. http://dx.doi.org/10.15376/biores.15.3.5450-5463.

Full text

Abstract:

Chemical contaminants from wood-based panels, such as volatile organic compounds (VOCs) and formaldehyde, are the main sources of indoor air pollution. The particleboards were used as the substrate and five common finishing methods, including melamine-impregnated paper, high-density polyethylene decorative film, wood veneer, polypropylene water borne paintings coatings, and polyurethane water borne paintings coatings, were selected for this study. The emission curves in the first 6 h and the equilibrium concentrations of the total volatile organic compounds (TVOC) and formaldehyde processed wi

APA, Harvard, Vancouver, ISO, and other styles

5

Ipatov, Aleksey, and Sergey Shmykov. "SYNTHESIS OF ANTIFRICTION COATINGS BY THE FABO METHOD." Tekhnicheskiy servis mashin 1, no. 142 (2021): 140–47. http://dx.doi.org/10.22314/2618-8287-2020-59-1-140-147.

Full text

Abstract:

In the paper, the technology of obtaining antifriction coatings by the method of finishing antifriction-free abrasive treatment with the implementation of the wear-free effect is proposed. (Research purpose) The research purpose is in developing an effective technology for obtaining copper coatings on the surface of steel parts of the shaft type to reduce the wear rate in the conditions of oil starvation of machine parts. (Materials and methods) During the study, a laboratory facility for the synthesis of antifriction coatings on the surface of steel parts by the method of finishing antifricti

APA, Harvard, Vancouver, ISO, and other styles

6

Francke, Barbara, and Artur Piekarczuk. "Experimental Investigation of Adhesion Failure between Waterproof Coatings and Terrace Tiles under Usage Loads." Buildings 10, no. 3 (2020): 59. http://dx.doi.org/10.3390/buildings10030059.

Full text

Abstract:

This paper analyses the mechanism of the loss of functional properties of water-impermeable products used under ceramic tiles bonded with adhesives. Recorded damages were caused by selected ageing factors and were measured by the loss of adhesion of individual layers of the set. The analyzed phenomenon is found mainly on terraces and balconies located in a mid-European transitional climate, i.e., exposed to temperatures passing through 0 °C for three seasons a year. The tests reflected the action of three main functional factors, i.e., temperatures, water and freeze/thaw cycles. Tested waterpr

APA, Harvard, Vancouver, ISO, and other styles

7

Jaic, Milan, Jovan Dobic, and Tanja Palija. "The influence of surface finishing of Paulownia Siebold et Zucc. on the mechanical properties of lacquered surface." Bulletin of the Faculty of Forestry, no. 102 (2010): 7–23. http://dx.doi.org/10.2298/gsf1002007j.

Full text

Abstract:

This paper presents the research of influence of sanding, staining and the use of polyurethane and acrylic coating on the adhesion, scratch resistance and abrasion resistance of the coating. Objective was to determine the most important mechanical properties of lacquered surfaces, considering the application of Paulownia elongata and Paulownia fortunei, by using different systems of surface finishing. Cross cut method was used for measurement of adhesion. More accurate view of coating adhesion was obtained by measuring the scratch resistance. Abrasion resistance was tested by the method of fre

APA, Harvard, Vancouver, ISO, and other styles

8

Kirilovs, Edgars, Laura Krūklīte, Silvija Kukle, and Zane Zelča. "Nanolevel Finishing for Veneered Products." Environment. Technology. Resources. Proceedings of the International Scientific and Practical Conference 1 (June 16, 2015): 56. http://dx.doi.org/10.17770/etr2015vol1.198.

Full text

Abstract:

<p class="R-AbstractKeywords"><span lang="EN-US">Wood veneer is mainly used for interior decoration applications in many different segments. It's ideal for residential projects, hotel projects, offices giving to the any interior a unique look and feel. In addition, veneer is also processed to create a variety of products such as veneer parquet, flexible veneer sheets, wood veneer boards, wood veneer wallpaper, etc. From the other side, veneered surfaces will always to a greater or lesser degree could change color, particular upon exposure to natural and artificial light. The degree

APA, Harvard, Vancouver, ISO, and other styles

9

Vlad-Cristea, Mirela Simona, Véronic Landry, Pierre Blanchet, and Claudiane Ouellet-Plamondon. "Nanocrystalline Cellulose as Effect Pigment in Clear Coatings for Wood." ISRN Nanomaterials 2013 (August 27, 2013): 1–12. http://dx.doi.org/10.1155/2013/930236.

Full text

Abstract:

Nanocrystalline cellulose (CNC) is a renewable material with high potential in many applications. Due to its unique self-assembly and optical properties, CNC tends to behave as an iridescent pigment. The aim of this research was to explore the potential of CNC as an effect pigment in wood coatings. CNC-based coatings were developed from an aqueous CNC solution, a UV-curable water-based clear coating formulation, several colorants, and specialized additives. In this paper, the morphology of the resulting CNC films was investigated through circular dichroism and optical microscopy under polarize

APA, Harvard, Vancouver, ISO, and other styles

10

Dearnley, P. A., E. Kern, and K. L. Dahm. "Wear response of crystalline nanocomposite and glassy Al2O3-SiC coatings subjected to simulated piston ring/cylinder wall tests." Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 219, no. 2 (2005): 121–37. http://dx.doi.org/10.1243/146442005x10300.

Full text

Abstract:

The present paper describes the major part of a recent research investigation whose main purpose was to develop a series of novel functional coatings based on the Al2O3-SiC system that ideally would have a nanocomposite microstructure. Such coatings should be well suited for the wear protection of steel and cast-iron piston rings used in automotive internal combustion engines. Two methods were investigated: (i) plasma spraying and (ii) magnetron sputtering. The former was applied to cast-iron and plain carbon steel, whereas the latter was applied to stainless steel piston rings. The plasma spr

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Paper coatings Paper coatings Paper finishing"

1

Dimetry, Basant Galal. "The Relationship between Rheology, Application Method, and Final Coating Structure." Fogler Library, University of Maine, 2001. http://www.library.umaine.edu/theses/pdf/DimetryBG2001.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Jain, Amitkumar Champalal. "Moisture transport in paper and paper coatings /." Philadelphia, Pa. : Drexel University, 2004. http://dspace.library.drexel.edu/handle/1860/354.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Seboa, Sharrief. "Polyurethane dispersions for paper coatings." Thesis, Stellenbosch : Stellenbosch University, 2002. http://hdl.handle.net/10019.1/53005.

Full text

Abstract:

Thesis (MSc)--Stellenbosch University, 2002.<br>ENGLISH ABSTRACT: Aqueous polyurethane (PU) dispersions were synthesized for the use in paper coatings. These PUs contained a polyester polyol soft segment (content of 60-70%) and a urethane hard segment (content of 30-40%). This was followed by grafting using four different grafting agents. Triethylamine (TEA) was used as the neutralizing agent. The polyester polyol segment consisted of neopentyl glycol (NPG), adipic acid, 1,4-cyclohexane dicarboxylic acid (1,4-CHOCA) and 2-phosphonobutane-1 ,2,4- tricarboxylic acid (PSTCA), while the uret

APA, Harvard, Vancouver, ISO, and other styles

4

Dahlvik, Peter. "Thermal thickening of paper coatings /." Åbo : Åbo akademi university, 2000. http://catalogue.bnf.fr/ark:/12148/cb40124278h.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Kriel, Carmen Cornelia. "Gel-particles for ink-jet paper coating applications." Thesis, Stellenbosch : Stellenbosch University, 2004. http://hdl.handle.net/10019.1/49970.

Full text

Abstract:

Thesis (MSc)--Stellenbosch University, 2004.<br>ENGLISH ABSTRACT: An unsaturated, linear, aliphatic polyamide was synthesized from 1,6-hexanediamine and fumaric acid by means of a phosphorylation polycondensation reaction, and successfully crosslinked with a vinyl monomer during an inverse suspension polymerization reaction. The two vinyl monomers that were used were 2-hydroxyethyl methacrylate (HEMA) and 4-vinyl pyridine. The linear polyamide was characterized by means of nuclear magnetic resonance (NMR) and electrospray mass spectrometry (ESMS), while the crosslinked product was charac

APA, Harvard, Vancouver, ISO, and other styles

6

Bitla, Shivashanker. "Application of Raman Techniques for Paper Coatings." Fogler Library, University of Maine, 2002. http://www.library.umaine.edu/theses/pdf/BitlaS2002.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Kjellgren, Henrik. "Influence of paper properties and polymer coatings on barrier properties of greaseproof paper." Doctoral thesis, Karlstad : Faculty of Technology and Science, Chemical Engineering, Karlstads universitet, 2007. http://www.diva-portal.org/kau/abstract.xsql?dbid=1238.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Rioux, Robert A. "Mechanical Testing of Coated Paper Systems." Fogler Library, University of Maine, 2008. http://www.library.umaine.edu/theses/pdf/RiouxRA2008.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Tinney, Brooke Merrill. "The effects of deinking on the coating compounds used on carbonless business forms /." Online version of thesis, 1991. http://hdl.handle.net/1850/11285.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Liu, Chung-Ni. "Laboratory investigation of the effect of the dampening solution on the loss of surface strength of coated paper /." Online version of thesis, 1993. http://hdl.handle.net/1850/11983.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Paper coatings Paper coatings Paper finishing"

1

Hämäläinen, Markku. Spray coating technique as a surface treatment for woodcontaining paper grades. Lappeenrannan teknillinen korkeakoulu, 2002.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Coating Conference (1987 Houston, Tex.). 1987 Coating Conference: Hyatt Regency, Houston, TX, May 17-21. TAPPI Press, 1987.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Coating Conference (2000 Washington, D.C.). 2000 TAPPI Coating Conference and trade fair: May 1-4, 2000, Marriott Wardman Hotel, Washington, DC. TAPPI Press, 2000.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

International Paper and Coating Chemistry Symposium (1996 Château Laurier, Ottawa, Ontario). International paper and coating chemistry symposium: Château Laurier, Ottawa, Ontario, June 11-13, 1996. CPPA, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Blade Coating Seminar (1990 Minneapolis, Minn.). 1990 Blade Coating Seminar: Hyatt Regency Minneapolis, Minneapolis, MN, November 4-7. TAPPI Press, 1990.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Blade Coating Seminar (1988 Portland, Me.). 1988 Blade Coating Seminar: Portland Marriott, Portland, ME, October 12-14. TAPPI Press, 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Blade Coating Seminar (1986 Appleton, Wis.). 1986 Blade Coating Seminar: Paper Valley Hotel, Appleton, WI, September 28-October 1. TAPPI Press, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Coating Conference (2002 Orlando, Florida). 2002 Coating and Graphic Arts Conference and Trade Fair. TAPPI, 2002.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Coating, Conference (2001 San Diego Calif ). 2001 Coating and Graphic Arts Conference and Trade Fair: May 6-9, 2001, Hyatt Regency, San Diego, CA. TAPPI Press, 2001.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Basestock Coating Manufacture & Technology Seminar (1990 Minneapolis, Minn.). 1990 Basestock Coating Manufacture & Technology Seminar: Hyatt Regency Minneapolis, Minneapolis, MN, November 4-7. TAPPI Press, 1990.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Paper coatings Paper coatings Paper finishing"

1

Aulin, Christian, and Tom Lindström. "Biopolymer Coatings for Paper and Paperboard." In Biopolymers - New Materials for Sustainable Films and Coatings. John Wiley & Sons, Ltd, 2011. http://dx.doi.org/10.1002/9781119994312.ch12.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Stanislawska, Anna, and Pierre Tebelius. "Development of Porous Structure During Consolidation of Pigmented Paper Coatings." In ACS Symposium Series. American Chemical Society, 1997. http://dx.doi.org/10.1021/bk-1997-0663.ch013.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Wang, Qing, Guangxue Chen, Zhaohui Yu, and Mingguang Yu. "Facile Strategy for the Fabrication of Superhydrophobic Coatings on the Surface of Paper." In Advances in Graphic Communication, Printing and Packaging. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-3663-8_97.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Ishikawa, Osamu, Takanori Yamashita, and Akira Tsuji. "Characterizing Mechanical Properties of Latex Film and Coating Layer in Paper Coating Using Dynamic Mechanical Thermal Analyzer (DMTA)." In Surface Phenomena and Latexes in Waterborne Coatings and Printing Technology. Springer US, 1995. http://dx.doi.org/10.1007/978-1-4757-2395-3_7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Liu, Zhuang, Lin Zhu, Hanlin Yang, Jiang Chang, and Wenping Cao. "SiO x /TiO y /C z H t Composite Coatings Prepared by Magnetron Co-sputtering on Substrate Paper." In Lecture Notes in Electrical Engineering. Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-7629-9_72.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Forouzanmehr, Mohsen, Kazem Reza Kashyzadeh, Amirhossein Borjali, Mosayeb Jafarnode, and Mahmoud Chizari. "Effects of CrN/TiN Coatings on Interfacial Contact Resistance of Stainless Steel 410 Bipolar Plates in Fuel Cells." In Springer Proceedings in Energy. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-63916-7_17.

Full text

Abstract:

AbstractChallenge on energy resources exists, especially when the fossil resources are limited. Fuel cells, as an alternative replacement, can be used. Fuel cells with coated bipolar plates are the interest of this paper. Current research is concerned with the effects of CrN/TiN coatings on interfacial contact resistance (ICR). Stainless steel 410 was selected as a base metal, and the coating process was performed using chromium nitride and titanium nitride by cathodic arc evaporation method. It was found that the surface roughness and ICR values of CrN-coated sample are lower than the TiN-coated sample. The concluded that the CrN layer could be replaced with the TiN layer for better performance of bipolar plates.

APA, Harvard, Vancouver, ISO, and other styles

7

Hötte, Felix, Oliver Günther, Christoph von Sethe, Matthias Haupt, Peter Scholz, and Michael Rohdenburg. "Lifetime Experiments of Regeneratively Cooled Rocket Combustion Chambers and PIV Measurements in a High Aspect Ratio Cooling Duct." In Notes on Numerical Fluid Mechanics and Multidisciplinary Design. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-53847-7_18.

Full text

Abstract:

Abstract This paper aims at experimental investigations of the life limiting mechanisms of regeneratively cooled rocket combustion chambers, especially the so called doghouse effect. In this paper the set up of a cyclic thermo-mechanical fatigue experiment and its results are shown. This experiment has an actively cooled fatigue specimen that is mounted downstream of a subscale GOX-GCH$$_{\text {4}}$$ combustion chamber with rectangular cross section. The specimen is loaded cyclically and inspected after each cycle. The effects of roughness, the use of thermal barrier coatings, the length of the hot gas phase, the oxygen/fuel ratio and the hot gas pressure are shown. In a second experiment the flow in a generic high aspect ratio cooling duct is measured with the Particle Image Velocimetry (PIV) to characterize the basic flow. The main focus of the analysis is on the different recording and processing parameters of the PIV method. Based on this analysis a laser pulse interval and the window size for auto correlation is chosen. Also the repeatability of the measurements is demonstrated. These results are the starting point for future measurements on the roughness effect on heat transfer and pressure loss in a high aspect ratio cooling duct.

APA, Harvard, Vancouver, ISO, and other styles

8

Farr, Marcus, Andrea Macruz, and Alexandre Ulson. "Material Response: Technology, Material Systems and Responsive Design." In Proceedings of the 2021 DigitalFUTURES. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-5983-6_20.

Full text

Abstract:

AbstractThis paper investigates the role technology and materials play in making meaningful connections between people, architectural space and the workplace. It indicates that design can synergize with responsive technology and material systems to leverage new power for future workplace interaction design. We have created a spatial prototype paired with a series of simulations that act as a proposal to stimulate workplace interaction. The project employs a responsive ceiling that combines a fluid computational pattern with temperature-responsive bi-material laminates with thermochromic coatings and electrically programmed micro-controllers. The project is then connected to a computer code that computes readings based upon ongoing interactions with humans wearing body sensors. The methodology categorizes the simulation results into aroused states and calm states. As the computational patterns and colors change, we are made aware of the relationships between space, technology, and the human sensorium. This conversation brings insight into how we can design more effectively for workplace interactions.

APA, Harvard, Vancouver, ISO, and other styles

9

Priest, Derek J. "Paper Coatings." In Technological Applications of Dispersions. CRC Press, 2020. http://dx.doi.org/10.1201/9781003067252-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Breton, E., and M. C. Dubourg. "Paper II (ii) Adhesion for Coatings." In Wear Particles: Frorn the Cradle to the Grave, Proceedings of the 18th Leeds-Lyon Symposium on Tribology. Elsevier, 1992. http://dx.doi.org/10.1016/s0167-8922(08)70507-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Paper coatings Paper coatings Paper finishing"

1

Tani, K., and A. Nakahira. "Applications of HVOF Sprayed WC Cermet Coatings for Paper Mills." In ITSC 1998, edited by Christian Coddet. ASM International, 1998. http://dx.doi.org/10.31399/asm.cp.itsc1998p1097.

Full text

Abstract:

Abstract Some applications of high velocity oxygen fuel (HVOF) flame sprayed WC cermet coatings in paper mills are summarized. The WC cermet sprayed coating is one of the most widely used in the thermal spray industry. HVOF sprayed WC cermet coatings have such excellent physical and chemical properties that they are extensively employed in the industrial field. Typical properties for example, are wear resistance, high stress rotating bending or rolling contact fatigue strength, frictional characteristics, wettability for aqueous agent, non picking or non adhesive property against foreign mater

APA, Harvard, Vancouver, ISO, and other styles

2

Sampson, E., R. Miller, and S. Lacourse. "Microfinishing Behavior of Chrome Oxide Coatings on Anilox Print Rolls: High Power vs. Conventional Plasma Spray." In ITSC 1996, edited by C. C. Berndt. ASM International, 1996. http://dx.doi.org/10.31399/asm.cp.itsc1996p0501.

Full text

Abstract:

Abstract Anilox rolls require dense, adherent chromium oxide coatings capable of the highest quality microfinishing and laser engraving. Process economy and high deposition rate are also essential. Increasingly, anilox roll job shops are spraying such coatings using a high power plasma system, prompting this detailed investigation of processes, powders, and finishing. This paper evaluates how the material and the process influence the finished texture and engraving quality. Criteria for a successful coating are defined. The effects of plasma process, powder type, and coating microstructure on

APA, Harvard, Vancouver, ISO, and other styles

3

Barbezat, G., S. Keller, and G. Wuest. "Internal Plasma Spray Process for Cylinder Bores in Automotive Industry." In ITSC 1997, edited by C. C. Berndt. ASM International, 1997. http://dx.doi.org/10.31399/asm.cp.itsc1997p0011.

Full text

Abstract:

Abstract In the Automotive Industry the need for lower manufacturing costs, the use of less strategic material, and easier, faster, and more flexible routes for manufacturing are being looked for continuously. The environmental concerns relating to the use of galvanic coatings is growing. This has led to the examination of the plasma-powder spray process for the application of coatings for surface modification. In the area of engine cylinder bore coatings a major advance is taking place in the use of a rotating plasma spray device. This paper covers the use of a plasma-powder spray process for

APA, Harvard, Vancouver, ISO, and other styles

4

Barbezat, G., S. Keller, and G. Wuest. "Internal Plasma Spray Process for Cylinder Bores in Automotive Industry." In ITSC 1998, edited by Christian Coddet. ASM International, 1998. http://dx.doi.org/10.31399/asm.cp.itsc1998p0963.

Full text

Abstract:

Abstract In the Automotive Industry the need for lower manufacturing costs, the use of less strategic material, and easier, faster, and more flexible routes for manufacturing are being looked for continuously. The environmental concerns relating to the use of galvanic coatings is growing. This has led to the examination of the plasma-powder spray process for the application of coatings for surface modification. In the area of engine cylinder bore coatings a major advance is taking place in the use of a rotating plasma spray device. This paper covers the use of a plasma-powder spray process for

APA, Harvard, Vancouver, ISO, and other styles

5

Hyvarinen, Timo S., and Juha Sumen. "Scattering in paper coatings." In San Diego, '91, San Diego, CA, edited by John C. Stover. SPIE, 1991. http://dx.doi.org/10.1117/12.50521.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Meier, Dirk, Hans-Joachim Warnecke, and Jan Pruess. "Removal of volatile organic compounds from paper coatings." In First International Conference on Interactive Paper, edited by Graham G. Allan and Jean J. Robillard. SPIE, 1997. http://dx.doi.org/10.1117/12.280776.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

O’Connor, B. M. "The Influence of Additive Chemistry on Gear Micropitting." In ASME 2003 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/detc2003/ptg-48125.

Full text

Abstract:

Gear micropitting has been a highly visible issue in selected applications in recent years, most notably in large wind turbine transmissions. Various industry groups have addressed the problem from their own area of expertise. This has included evaluation of the gear design characteristics, surface finishing, the use of special coatings, and lubrication. A common approach to improve the lubrication has been first to increase the viscosity and create thicker films, which, in turn, reduce the amount of surface asperity interaction. Another approach from the lubricant side has been to alter the a

APA, Harvard, Vancouver, ISO, and other styles

8

Bencic, Timothy J., and Jeffrey I. Eldridge. "Smart coatings for health monitoring and nondestructive evaluation (Invited Paper)." In Nondestructive Evaulation for Health Monitoring and Diagnostics, edited by Norbert Meyendorf, George Y. Baaklini, and Bernd Michel. SPIE, 2005. http://dx.doi.org/10.1117/12.606240.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Rayss, Jan. "Optical fiber coatings for chemical and biochemical sensing (Invited Paper)." In Bruges, Belgium - Deadline Past. SPIE, 2005. http://dx.doi.org/10.1117/12.623285.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Żołek-Tryznowska, Zuzanna, and Marta Więcek. "Measurements of surface free energy as a tool to asses the effect of varnishing and printing of the paper substrates." In 10th International Symposium on Graphic Engineering and Design. University of Novi Sad, Faculty of technical sciences, Department of graphic engineering and design,, 2020. http://dx.doi.org/10.24867/grid-2020-p18.

Full text

Abstract:

Nowadays, printing products might be finished in various ways. Varnishing process is one of the most popular finishing method which gives various effect, such as mate, glossy etc. However, the varnish layer applied on the paper is very thin, therefore it can be invisible to the naked human eye. The aim of this work was to use contact angle measurement and surface free energy determination as a tool to assess the effect of printing and varnishing process of paper materials. We have used various tools in order to analyses the changes of surface: surface roughness, gloss, water contact angle abso

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!