Relevant bibliographies by topics / Parallel plate capacitor

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Parallel plate capacitor'

Author: Grafiati
Published: 4 June 2021
Last updated: 4 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Parallel plate capacitor.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Parallel plate capacitor"

1

Phillips, Jonathan, and Alexander Roman. "Understanding Dielectrics: Impact of External Salt Water Bath." Materials 12, no. 12 (June 25, 2019): 2033. http://dx.doi.org/10.3390/ma12122033.

Full text
Abstract:
As predicted by the theory of super dielectric materials, simple tests demonstrate that dielectric material on the outside of a parallel plate capacitor dramatically increases capacitance, energy density, and power density. Simple parallel plate capacitors with only ambient air between the plates behaved as per standard theory. Once the same capacitor was partially submerged in deionized water (DI), or DI with low dissolved NaCl concentrations, still with only ambient air between the electrodes, the capacitance, energy density, and power density, at low frequency, increased by more than seven orders of magnitude. Notably, conventional theory precludes the possibility that material outside the volume between the plates will in any fashion impact capacitive behavior.
APA, Harvard, Vancouver, ISO, and other styles
2

Dindorf, Wojciech. "Parallel Plate Capacitor at Home." Physics Teacher 42, no. 4 (April 2004): 250. http://dx.doi.org/10.1119/1.1696597.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Livovsky, Lubomir, and Alena Pietrikova. "Measurement and regulation of saturated vapour height level in VPS chamber." Soldering & Surface Mount Technology 31, no. 3 (June 3, 2019): 157–62. http://dx.doi.org/10.1108/ssmt-10-2018-0040.

Full text
Abstract:
Purpose The purpose of this paper is to investigate measurement and regulation of saturated vapour height level in vapour phase soldering (VPS) chamber based on parallel plate capacitor and retaining a stable saturated vapour level above the boiling fluid, regardless of the quantity and size of assembled components. Design/methodology/approach Development and realisation of capacitance sensor that sensitively senses the maximum height level of saturated vapour above the boiling fluid in the VPS chamber was achieved. Methodology of measurement is based on capacitor change from single air to a parallel plate, filled with two dielectric environments in a stacked configuration: condensed fluid and vapour (air). Findings An easy air plate capacitor immersed in the saturated vapour above the boiling fluid can serve as a parallel plate capacitor owing to the conversion of the air to the parallel plate capacitor. A thin film of fluid between the two capacitor plates corresponds to the height of the saturated vapour, which changes the capacity of the parallel plate capacitor. Originality/value Introducing the capacitive sensor directly into the VPS work space allows to achieve a constant height level of saturated vapour. Based on the capacity change, it is possible to control the heating power. There is a lack of information regarding measurement of stable height of vapour in the industry, and the present article shows how to easily improve the way to regulate the bandwidth of saturated vapour in the VPS process.
APA, Harvard, Vancouver, ISO, and other styles
4

Carlson, G. T., and B. L. Illman. "The circular disk parallel plate capacitor." American Journal of Physics 62, no. 12 (December 1994): 1099–105. http://dx.doi.org/10.1119/1.17668.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Yan, F. N., and H. K. Wong. "Force between the plates of a parallel‐plate capacitor." American Journal of Physics 61, no. 12 (December 1993): 1153. http://dx.doi.org/10.1119/1.17316.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Phillips, Jonathan. "Toward an Improved Understanding of the Role of Dielectrics in Capacitors." Materials 11, no. 9 (August 24, 2018): 1519. http://dx.doi.org/10.3390/ma11091519.

Full text
Abstract:
A new fundamental principle of the theory of dielectrics in capacitors is demonstrated. That is, dielectric material in any geometry that reduces the field generated by charges on capacitor electrodes is effective in increasing capacitance. Specifically, it is shown that super dielectric material on the outer surfaces of the electrodes of a parallel plate capacitor increases dielectric constant, as well as energy and power densities, by orders of magnitude. The implicit assumption in all current capacitor theory, that the “capacitor” is only that region occupied by the electrodes and the space between them, is shown to be incorrect.
APA, Harvard, Vancouver, ISO, and other styles
7

Wijayono, Andrian, and Valentinus Galih Vidia Putra. "Pengukuran Konstanta Dielektrik Udara Pada Perangkat Kapasitor Plat-Sejajar Berbasis Mikrokontroler Arduino Uno." JIPFRI (Jurnal Inovasi Pendidikan Fisika dan Riset Ilmiah) 4, no. 1 (May 26, 2020): 13–26. http://dx.doi.org/10.30599/jipfri.v4i1.651.

Full text
Abstract:
This study aims to design a prototype of an air dielectric constant measuring device and be able to measure the capacitance value using an Arduino microcontroller device. The measurement of the air dielectric constant is carried out by means of the principle of measuring the capacitance of a capacitor device with a plate-parallel configuration with the air dielectric material. Capacitance measurements are carried out with the principle of charging and emptying capacitors using an Arduino Uno microcontroller device. The charging and discharging process is carried out using a series of resistor-capacitor (RC) series with a source voltage of 5 volts from the microcontroller device. This experiment has used a parallel plate with a size of 29 × 30 cm as an electrode capacitor, and a resistor device with a size of 125 megaOhm. The results showed that the behavior of charging and discharging parallel plate capacitor devices has an R square value of> 0.9, which shows a fairly good correlation between the predicted and experimental results on capacitance measurements. The results showed that the prototype of a dielectric constant measuring device can be well designed by showing the capacitance value of the device at the state of filling and emptying and the measurement results show the value of the air dielectric constant has been measured with a value of 0.991 - 1.0346.
APA, Harvard, Vancouver, ISO, and other styles
8

Xiao, Zhi Hong. "The Research of Parallel Plate Capacitor Measurement Circuit." Applied Mechanics and Materials 380-384 (August 2013): 959–62. http://dx.doi.org/10.4028/www.scientific.net/amm.380-384.959.

Full text
Abstract:
Capacitive sensor plays an important role in electrical measuring technology. A new method of a set of parallel plate capacitor measurement circuit was proposed. The system adopted the self-excited balanced measuring method to gauge the change amount of capacitive sensor. The results show that the system has a high level of measurement accuracy and an anti-jamming capability.
APA, Harvard, Vancouver, ISO, and other styles
9

Acevedo-Barrera, Anays, Doris Atenea Cerecedo-Mercado, and Augusto García-Valenzuela. "Monitoring Hemolysis with a Parallel Plate Capacitor." Proceedings 1, no. 8 (December 4, 2017): 726. http://dx.doi.org/10.3390/proceedings1080726.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Parker, G. W. "Electric field outside a parallel plate capacitor." American Journal of Physics 70, no. 5 (May 2002): 502–7. http://dx.doi.org/10.1119/1.1463738.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Parallel plate capacitor"

1

Diefenderfer, Brian K. "Development and Testing of a Capacitor Probe to Detect Deterioration in Portland Cement Concrete." Thesis, Virginia Tech, 1998. http://hdl.handle.net/10919/35397.

Full text
Abstract:
Portland cement concrete (PCC) structures deteriorate with age and need to be maintained or replaced. Early detection of deterioration in PCC (e.g., alkali-silica reaction, freeze/thaw damage or chloride presence) can lead to significant reductions in maintenance costs. Portland cement concrete can be nondestructively evaluated by electrically characterizing its complex dielectric constant in a laboratory setting. A parallel-plate capacitor operating in the frequency range of 0.1 to 40.1 MHz was developed at Virginia Tech for this purpose. While useful in research, this approach is not practical for field implementation. In this study, a capacitor probe was designed and fabricated to determine the in-situ dielectric properties of PCC over a frequency range of 2.0 to 20.0 MHz. It is modeled after the parallel-plate capacitor in that it consists of two conducting plates with a known separation. The conducting plates are flexible, which allows them to conform to different geometric shapes. Prior to PCC testing, measurements were conducted to determine the validity of such a system by testing specimens possessing known dielectric properties (Teflon). Portland cement concrete specimens were cast (of sufficient size to prevent edge diffraction of the electromagnetic waves) having two different air contents, two void thicknesses, and two void depths (from the specimen's surface). Two specimens were cast for each parameter and their results were averaged. The dielectric properties over curing time were measured for all specimens, using the capacitor probe and the parallel-plate capacitor. The capacitor probe showed a decrease in dielectric constant with increasing curing time and/or air content. In addition to measuring dielectric properties accurately and monitoring the curing process, the capacitor probe was also found to detect the presence and relative depth of air voids, however, determining air void thickness was difficult.
Master of Science
APA, Harvard, Vancouver, ISO, and other styles
2

Bhaswara, Adhitya. "Fabrication of suspended plate MEMS resonator by micro-masonry." Thesis, Toulouse 3, 2015. http://www.theses.fr/2015TOU30325/document.

Full text
Abstract:
L'impression par transfert, une technique utilisée pour transférer divers matériaux tels que des molécules d'ADN, de la résine photosensible ou des nanofils semi-conducteurs, s'est dernièrement révélée utile pour la réalisation de structures de silicium statiques sous le nom de micro-maçonnerie. L'étude présentée ici explore le potentiel de la technique de micro-maçonnerie pour la fabrication de résonateurs MEMS. Dans ce but, des microplaques de silicium ont été transférées sur des couches d'oxyde avec cavités intégrées à l'aide de timbres de polymère afin de créer des structures de type plaques suspendues. Le comportement dynamique de ces structures passives a été étudié sous pression atmosphérique et sous vide en utilisant une excitation externe par pastille piézo-électrique mais aussi le bruit thermomécanique. Par la suite, des résonateurs MEMS actifs, à actionnement électrostatique et détection capacitive intégrés, ont été fabriqués en utilisant des étapes supplémentaires de fabrication après impression. Ces dispositifs ont été caractérisés sous pression atmosphérique. Les facteurs de qualité intrinsèques des dispositifs fabriqués ont été évalués à 3000, ce qui est suffisant pour les applications de mesure à pression atmosphérique et en milieu liquide. Nous avons démontré que, puisque l'adhérence entre la plaque et l'oxyde est suffisamment forte pour empêcher une diaphonie mécanique entre les différentes cavités d'une même base, plusieurs résonateurs peuvent être facilement réalisés en une seule étape d'impression. Ce travail de thèse montre que la micro-maçonnerie est une technique simple et efficace pour la réalisation de résonateurs MEMS actifs de type plaque à cavité scellée
Lately, transfer printing, a technique that is used to transfer diverse materials such as DNA molecules, photoresist, or semiconductor nanowires, has been proven useful for the fabrication of various static silicon structures under the name micro-masonry. The present study explores the suitability of the micro-masonry technique to fabricate MEMS resonators. To this aim, silicon microplates were transfer-printed by microtip polymer stamps onto dedicated oxide bases with integrated cavities in order to create suspended plate structures. The dynamic behavior of fabricated passive structures was studied under atmospheric pressure and vacuum using both external piezo-actuation and thermomechanical noise. Then, active MEMS resonators with integrated electrostatic actuation and capacitive sensing were fabricated using additional post-processing steps. These devices were fully characterized under atmospheric pressure. The intrinsic Q factor of fabricated devices is in the range of 3000, which is sufficient for practical sensing applications in atmospheric pressure and liquid. We have demonstrated that since the bonding between the plate and the device is rigid enough to prevent mechanical crosstalk between different cavities in the same base, multiple resonators can be conveniently realized in a single printing step. This thesis work shows that micro-masonry is a powerful technique for the simple fabrication of sealed MEMS plate resonators
APA, Harvard, Vancouver, ISO, and other styles
3

Horn, Jacqueline Marie. "Design of a Wearable Flexible Resonant Body Temperature Sensor with Inkjet-Printing." Thesis, University of North Texas, 2020. https://digital.library.unt.edu/ark:/67531/metadc1703340/.

Full text
Abstract:
A wearable body temperature sensor would allow for early detection of fever or infection, as well as frequent and accurate hassle-free recording. This thesis explores the design of a body-temperature-sensing device inkjet-printed on a flexible substrate. All structures were first modeled by first-principles, theoretical calculations, and then simulated in HFSS. A variety of planar square inductor geometries were studied before selecting an optimal design. The designs were fabricated using multiple techniques and compared to the simulation results. It was determined that inductance must be carefully measured and documented to ensure good functionality. The same is true for parallel-plate and interdigitated capacitors. While inductance remains relatively constant with temperature, the capacitance of the device with a temperature-sensitive dielectric layer will result in a shift in the resonant frequency as environmental or ambient temperature changes. This resonant frequency can be wirelessly detected, with no battery required for the sensing device, from which the temperature can be deduced. From this work, the optimized version of the design comprises of conductive silver in with a temperature-sensitive graphene oxide layer, intended for inkjet-printing on flexible polyimide substrates. Graphene oxide demonstrates a high dielectric permittivity with good sensing capabilities and high accuracy. This work pushes the state-of-the-art in applying these novel materials and techniques to enable flexible body temperature sensors for future biomedical applications.
APA, Harvard, Vancouver, ISO, and other styles
4

Bhat, Shreyas. "Salinity (conductivity) sensor based on parallel plate capacitors." [Tampa, Fla] : University of South Florida, 2005. http://purl.fcla.edu/usf/dc/et/SFE0001381.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Abrahamson, Stuart M. "In-situ measurement of total dose radiation effects on parallel plate MOS capacitors using the NPS linear accelerator." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 1995. http://handle.dtic.mil/100.2/ADA306694.

Full text
Abstract:
Thesis (M.S. in Electrical Engineering and M. S. in Astronautical Engineering) Naval Postgraduate School, December 1995.
"December 1995." Thesis advisor(s): Sherif Michael, Oscar Biblarz. Includes bibliographical references. Also available online. Mode of access: World Wide Web.
APA, Harvard, Vancouver, ISO, and other styles
6

Hsueh, Chih-Wei, and 薛智瑋. "Studies of linearity enhanced structures of the parallel plate capacitor." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/37122697805698230099.

Full text
Abstract:
碩士
淡江大學
電機工程學系碩士班
95
Abstract： In this thesis, the FDTD method is employed to calculate the static capacitance of several parallel-plate capacitors. The study of the capacitor characteristics is made to emphasize on the linearity analysis for the possible sensor application. The linearity of several parallel-plate structures is examined, which include a simple parallel-plate capacitor, a parallel-plate structure with guard ring only, and a parallel-plate structure with guard ring and pins, etc. Through the use of the transparent current source, the parallel-plates can be charged such that the transient and static E fields are simulated using the FDTD updating equations. The static E field is used to calculate the voltage across the parallel-plates. The capacitance is obtained directly by dividing the charge over the voltage. In general the parallel plate capacitor with guard ring is used to increase the linearity of sensor capacitors. Thus, in this thesis, two capacitor structures with guard ring and the simple parallel-plate capacitor are studied for the emphasis on the linearity characteristics. A transparent source in between of the upper and lower central plates is utilized, while, another transparent source in between of the guard rings of upper and lower plates are employed at the same time. The amplitudes of these two sources are adjusted in order to achieve equal potential differences, of which the idea is to implement the concept of virtual short, for the two source terminals. The simulated results for the capacitors that are virtually shorted are compared to those of the simple parallel-plate capacitor and/or the capacitors with guard ring (not virtually shorted). The FDTD simulation results confirm that the linearity of the former capacitors with the guard ring, being virtually shorted, is better than that of the simple parallel-plate capacitor and/or the parallel plate capacitor with the guard ring, being not virtually shorted. On the other hand, it is found that the linearity of a parallel-plate capacitor with guard ring is actually the same as a simple parallel-plate capacitor with the same plate area. Afterwards, a new parallel-plate structure with pins inserted in between the parallel plates is proposed to reduce the linearity deviation as the separation of the parallel plates changes. The simulated results show that the performances of linearity characteristics in decent order are as follows: 1st) capacitors with guard ring and pins, 2nd)capacitors with guard ring (virtually shorted), 3rd) the simple parallel-plate capacitors, 4th) capacitors with guard ring (not virtually shorted).
APA, Harvard, Vancouver, ISO, and other styles
7

Lin, Ding-Kai, and 林鼎凱. "Linearity analysis of a parallel plate capacitor via the FDTD method." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/63970994030634657541.

Full text
Abstract:
碩士
淡江大學
電機工程學系碩士在職專班
94
In this thesis, the application of the finite-difference time-domain (FDTD)method for the parallel-plate capacitor are investigated. Through the use of the transparent current source, the parallel-plates are charged such that the transient and static E fields can be simulated using the FDTD update equation. The static E field is used to calculate the voltage across the parallel-plates. The capacitance is obtained directly by dividing the charge over the voltage. The study of the characteristics for the parallel plate capacitor is make to emphasis on the linearity analysis for the possible sensor application. There are three capacitor structures investigated for linearity analysis. The capacitors are fabricated by using FR4 board, of which the capacitances are compared with the FDTD simulation results. The non-linearity due to the fringing effect would degrade the performance of a capacitor sensor. The simulated linearity curves of certain structure obtained in this thesis are different from the literature. To confirm the simulated results, the capacitors are fabricated and measured carefully by using a digital oscilloscope. To increase the measurement accuracy we setup a de-embedding procedure for the calibration of the connecting cable and the digital oscilloscope. Furthermore, the genetic algorithm (GA) is employed to find out input impedance of oscilloscope and the capacitance of the probe. Finally, through a simple voltage dividing rule, we can resolve the capacitance for the capacitor under test. On the other hand, the capacitive sensors are also applied to find the dielectric property between the parallel plates.
APA, Harvard, Vancouver, ISO, and other styles
8

Susanti, Diah, and 珊蒂. "Electrochemical Capacitors of Anhydrous and Hydrous RuO2 Using Two Configurations of Parallel-Plate and Interdigital Electrodes." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/83896161072576716899.

Full text
Abstract:
博士
國立臺灣科技大學
化學工程系
96
Structural electrodes of anhydrous RuO2 vertical nanorods encased in hydrous RuO2 have been prepared via chemical vapor deposition (CVD) followed by electrochemical deposition and arranged in parallel-plate configurations. The composite structures are studied using scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The capacitive properties are measured using cyclic voltammetry and impedance spectroscopy. In a miniaturized configuration, the CVD grown structure provides a connecting backbone of electron paths and open channels for ion migration to facilitate the charge delivery or acceptance from the electrodeposited hydrous RuO2 of high pseudocapacitance. The sample of thermally reduced nanorods encased in RuO2•0.46H2O (RuRuO2NR-H2) exhibits a total capacitance of 侧520 Fg-1 (870 mFcm-2) at 5 mVs-1, superior to that of the RuO2•0.46H2O coated as-grown nanorods (RuO2NR-H) 侧260 Fg-1 (300 mFcm-2). Despite the twice charge storage capability, RuRuO2NR-H2 demonstrates a similar capacitor response time as RuO2NR-H, because of its low internal resistance. Two important features of RuRuO2NR-H2 are identified, including an open structure for hydrous RuO2 accommodation and a fast electron path for charge delivery and retrieval. Besides the parallel-plate configuration, the capacitor electrodes are configured in interdigital single-chip capacitors via photolithography and reactive sputtering techniques. Briefly, the anhydrous RuO2 nanorods are grown on finger-like patterned of TiO2/Ti/Au/SiO2/Si substrates with various finger spacing of d = 20, 30, and 40 μm. The hydrous RuO2 is electrochemically deposited on the anhydrous RuO2 samples to increase the specific capacitance. Scanning electron microscopy, transmission electron microscopy, and X-ray diffraction are used to study the structures of the composites. The capacitive properties are measured using cyclic voltammetry, charging-discharging and impedance spectroscopy analysis. The specific capacitances of d=20 μm are larger than those of d=30 μm and those of d=30 μm are larger than those of d=40 μm. The mass-specific capacitance of d=20 μm is 105.5 F.g-1, that of d=30 μm is 77 F.g-1 and that of d=40 μm is 68.4 F.g-1 measured by cyclic voltammetry at 2 mV.s-1 sweep rate. Besides, the sample of d=20 μm also performs the fastest capacitive response among the other two samples. Although the specific capacitances of the finger-like electrodes are smaller than those of the parallel-plate electrodes, this design offers practicality in integrating the electrode in a single chip and fast capacitive response.
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Parallel plate capacitor"

1

Szmukler, George. Emergencies, general medicine, ‘community treatment orders’, and ‘psychiatric advance statements’. Oxford University Press, 2017. http://dx.doi.org/10.1093/med/9780198801047.003.0012.

Full text
Abstract:
The implications of the Fusion Law for general medicine, especially inpatient care when non-consensual and involuntary treatment is being considered, are examined in this chapter. The new burdens posed by regulation can be minimized by making requirements essentially parallel ‘good practice’. Involuntary psychiatric treatment in the community under the ‘decision-making capability–best interests (will and preferences)’ principles of the Fusion Law would be substantially different from the way it is commonly instituted today. The Fusion Law offers an important place for ‘advance statements’ and ‘advance directives’, supporting respect for a patient’s beliefs and values (or ‘will and preferences’). Illnesses that impair decision-making capacity, but that are relapsing-remitting—such as the majority of mental illnesses—are good candidates for such advance planning, yet such measures have rarely been employed to date.
APA, Harvard, Vancouver, ISO, and other styles
2

Jackendoff, Ray, and Jenny Audring. The Texture of the Lexicon. Oxford University Press, 2019. http://dx.doi.org/10.1093/oso/9780198827900.001.0001.

Full text
Abstract:
The Texture of the Lexicon explores three interwoven themes: a morphological theory, the structure of the lexicon, and an integrated account of the language capacity and its place in the mind. These themes together constitute the theory of Relational Morphology (RM), extending the Parallel Architecture of Jackendoff’s groundbreaking Foundations of Language. Part I (chapters 1–3) situates morphology in the architecture of the language faculty, and introduces a novel formalism that unifies the treatment of morphological patterns, from totally productive to highly marginal. Two major points emerge. First, traditional word formation rules and realization rules should be replaced by declarative schemas, formulated in the same terms as words. Hence the grammar should really be thought of as part of the lexicon. Second, the traditional emphasis on productive patterns, to the detriment of nonproductive patterns, is misguided; linguistic theory can and should encompass them both. Part II (chapters 4–6) puts the theory to the test, applying it to a wide range of familiar and less familiar morphological phenomena. Part III (chapters 7–9) connects RM with language processing, language acquisition, and a broad selection of linguistic and nonlinguistic phenomena beyond morphology. The framework is therefore attractive not only for its ability to account insightfully for morphological phenomena, but equally for its contribution to the integration of linguistic theory, psycholinguistics, and human cognition.
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Parallel plate capacitor"

1

Gudavalli, Ganesh Sainadh, and Tara P. Dhakal. "Simple Parallel-Plate Capacitors to High–Energy Density Future Supercapacitors." In Emerging Materials for Energy Conversion and Storage, 247–301. Elsevier, 2018. http://dx.doi.org/10.1016/b978-0-12-813794-9.00008-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Jackendoff, Ray, and Jenny Audring. "Situating morphology." In The Texture of the Lexicon, 3–24. Oxford University Press, 2019. http://dx.doi.org/10.1093/oso/9780198827900.003.0001.

Full text
Abstract:
The book has three interwoven themes: a morphological theory, the structure of the lexicon, and an integrated account of the language capacity and its place in the mind. These themes together constitute the theory of Relational Morphology (RM), itself an extension of the Parallel Architecture of Jackendoff’s Foundations of Language, and closely related to Construction Grammar and Construction Morphology. A fundamental feature is that phonology, syntax, and semantics are independent components of language, linked by interfaces. Another feature is the continuity between lexicon and grammar. RM extends these features to the internal structure of words. In particular, morphology is constituted of a morphosyntactic component and its interfaces to phonology, phrasal syntax, and semantics. Furthermore, RM expresses regularities among words not in terms of rules that derive morphologically complex words, but in terms of declarative schemas that capture patterns of shared structure. The chapter concludes with a survey of similarities and differences between phrasal syntax and morphosyntax.
APA, Harvard, Vancouver, ISO, and other styles
3

Badler, Norman I., Cary B. Phillips, and Bonnie Lynn Webber. "Epilogue." In Simulating Humans. Oxford University Press, 1993. http://dx.doi.org/10.1093/oso/9780195073591.003.0010.

Full text
Abstract:
To define a future for the work described in this book, it is essential to keep in mind the broad goals which motivated the efforts in the first place. Useful and usable software is desired, to be sure, but the vision of manipulating and especially instructing a realistically behaved animated agent is the greater ambition. Some of our visions for the near future are presented, not just for the sake of prognostication, but for its exciting prospects and possibilities. Any discussion of the future of software must take into account the extraordinary pace of developments in the hardware arena. Even conservative predictions of hardware capabilities such as speed and capacity over the five year term lead one perilously close to science fiction. Accordingly, predictions of “better, faster, cheaper, more reliable, more fault tolerant, more highly parallel computers” are easy to make but do little to inform us of the applications these fantastic machines will facilitate. Rather, as general purpose computers improve in all these ways, specialized hardware solutions will decrease in importance and robust, usable software and symbiotic human-computer interfaces will remain the crucial link between a task and a solution. Transforming research into practice is a lengthy process, consisting of a flow of concepts from ideas through algorithms to implementations, from testing and analysis through iterated design, and finally transfer of demonstratably workable concepts to external users and actual applications. This entire process may span years, from the initial description of the concept to a fielded system. The publication of initial results often breeds over-optimism and has been known to lead researchers to allow false expectations to arise in the minds of potential users, with unfortunate results. (Automatic machine translation of text, speech understanding, and early promises of Artificial Intelligence problem solving are good examples of premature speculations.) At the other end of the spectrum, however, are concepts which take a long time to work their way into mainstream technological consciousness. (3D computer graphics is a good example where concepts and even working systems pre-dated widespread commercial availability by more than a decade.) So we will attempt to strike a balance in making speculations: while looking toward a long term research plan we will generally consider technology transfer to occur when serious but sympathetic users can experiment and accomplish real work with it.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Parallel plate capacitor"

1

Kristensson, Gerhard. "The capacity change of a bounded object in a parallel plate capacitor." In 2011 XXXth URSI General Assembly and Scientific Symposium. IEEE, 2011. http://dx.doi.org/10.1109/ursigass.2011.6050380.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Laohapensaeng, Teeravisit. "Adaptive Null Steering Circular Parallel Plate Capacitor Array Antenna." In 2018 15th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology (ECTI-CON). IEEE, 2018. http://dx.doi.org/10.1109/ecticon.2018.8620036.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Sahara, Matthew W., Jacob A. Marutani, Aaron T. Ohta, and Wayne A. Shiroma. "A Tunable Parallel-Plate Capacitor Using Liquid-Metal Actuation." In 2021 IEEE Texas Symposium on Wireless and Microwave Circuits and Systems (WMCS). IEEE, 2021. http://dx.doi.org/10.1109/wmcs52222.2021.9493290.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Etxeberria, J. A., and F. J. Gracia. "High Q factor RF MEMS Tunable Metallic Parallel Plate Capacitor." In 2007 Spanish Conference on Electron Devices. IEEE, 2007. http://dx.doi.org/10.1109/sced.2007.383960.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sarafian, Haiduke. "Rotating Elliptical Parallel-Plate Capacitor and a Transient Electric Circuit." In 2008 International Conference on Computational Science and Its Applications (ICCSA). IEEE, 2008. http://dx.doi.org/10.1109/iccsa.2008.17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Emami, Neda, and Maher Bakri-Kassem. "Slotted multi-step RF MEMS-CMOS parallel plate variable capacitor." In 2016 IEEE 59th International Midwest Symposium on Circuits and Systems (MWSCAS). IEEE, 2016. http://dx.doi.org/10.1109/mwscas.2016.7869990.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Paul, Mansi, and T. S. Kalkur. "Reduced size tunable power splitter implemented with ferroelectric parallel plate capacitor." In 2013 SBMO/IEEE MTT-S International Microwave and Optoelectronics Conference (IMOC). IEEE, 2013. http://dx.doi.org/10.1109/imoc.2013.6646424.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Sohl, Christian, Mats Gustafsson, Gerhard Kristensson, Davor Lovric, Martin Nilsson, and Anders Sunesson. "Electrostatic measurements of low capacitance changes in a parallel plate capacitor." In 2011 XXXth URSI General Assembly and Scientific Symposium. IEEE, 2011. http://dx.doi.org/10.1109/ursigass.2011.6050288.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Blecic, Raul, Quentin Diduck, and Adrijan Baric. "Minimization of maximum electric field in high-voltage parallel-plate capacitor." In 2016 39th International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO). IEEE, 2016. http://dx.doi.org/10.1109/mipro.2016.7522119.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Budnik, M. M., E. W. Johnson, and J. D. Wood. "A Thin, Vertical, Parallel Plate Capacitor with Multi-Wall Carbon Nanotube Electrodes." In 2008 8th IEEE Conference on Nanotechnology (NANO). IEEE, 2008. http://dx.doi.org/10.1109/nano.2008.87.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Parallel plate capacitor' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography