Journal articles: 'Parameterized design'

1

YAO, Huixue. "Parameterized Database Design of Vehicle Brakes." Chinese Journal of Mechanical Engineering 44, no. 10 (2008): 255. http://dx.doi.org/10.3901/jme.2008.10.255.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Wang, Yan Zhen, Jian Ping Wang, Sun Sun, and Yan Mei Li. "Women's Suit Pattern Parameterized Intelligent Design." Advanced Materials Research 331 (September 2011): 578–81. http://dx.doi.org/10.4028/www.scientific.net/amr.331.578.

Full text

Abstract:

To study the parameterized intelligent generation of women’s suit pattern, it is proposed a concept about rapid generation of individualize pattern. Focused on research principal parts (Body modular, Sleeve modular and lapel modular) of lady’s suit automatic generation system and built up the curve mathematics parameters model, it obtained the data base of system structure. Realization of suit showed how to establish the parametric model of body, sleeve and collar. It began to set up a automatic system about interactive pattern tentatively on the base of VC++ and Arcobjects.

APA, Harvard, Vancouver, ISO, and other styles

3

Wang, Lijing. "A Parameterized Mannequin for Apparel Design." Journal of Fiber Bioengineering and Informatics 1, no. 2 (June 2008): 117–24. http://dx.doi.org/10.3993/jfbi09200805.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Consel, Charles, and Siau Cheng Khoo. "Parameterized partial evaluation." ACM SIGPLAN Notices 26, no. 6 (June 1991): 92–106. http://dx.doi.org/10.1145/113446.113454.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Zhou, Si Zhu, and Si Zhang. "Parametric Design of the Coupling of Oilfield Turbodrill." Key Engineering Materials 579-580 (September 2013): 305–9. http://dx.doi.org/10.4028/www.scientific.net/kem.579-580.305.

Full text

Abstract:

Through discussing the working characteristics of turbodrill and structural particularity of the coupling, the feasibility of couplings series design by parameterized design method has been presented. Through taking advantage of Proe, selecting a turbodrill with diameter of 195mm as the original model, the series design and parameterized design of coupling have been achieved. This paper puts forward four design skills through analyzing the parameterized design of the coupling. The method has been developed and used in the series design of oilfield turbodrill in Yangtze university of China.

APA, Harvard, Vancouver, ISO, and other styles

6

Séquin, C. H., and E. K. Smyrl. "Parameterized Ray-tracing." ACM SIGGRAPH Computer Graphics 23, no. 3 (July 1989): 307–14. http://dx.doi.org/10.1145/74334.74365.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Cheng, Yongxi, Ding-Zhu Du, Ker-I. Ko, and Guohui Lin. "On the Parameterized Complexity of Pooling Design." Journal of Computational Biology 16, no. 11 (November 2009): 1529–37. http://dx.doi.org/10.1089/cmb.2008.0224.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Zhao, H. Z., and F. L. Yin. "Research of Missile Parameterized Design System with ProToolkit." Advanced Materials Research 215 (March 2011): 393–96. http://dx.doi.org/10.4028/www.scientific.net/amr.215.393.

Full text

Abstract:

The system structure of missile parameterized design is put forward to solve the repeat problems in the process of designing and manufacturing missiles. It is illustrated that in Pro/E environment the combination of missile design parameters with constraint relation is adopted to develop missile parameterized system with VC++6.0 and Pro/Toolkit used as secondary development tools for the secondary development and through the dynamic linkage, and the missile parameterized design system is integrated with Pro/E tightly. The missiles designers can obtain series of projectiles or new types of projectiles by modifying main design parameters, which making it possible to meet with a certain standard tactically and technically and shorten the cycle of designing new products.

APA, Harvard, Vancouver, ISO, and other styles

9

Hou, Shou Ming, Yong Xian Liu, Bo Yan, and Zhong Qi Sheng. "Research on Parameterized Modeling Method of Parts and Components Library for Rapid Response System." Applied Mechanics and Materials 16-19 (October 2009): 368–73. http://dx.doi.org/10.4028/www.scientific.net/amm.16-19.368.

Full text

Abstract:

In order to meet the requirement of mass customization and rapid response design, a hierarchical parameterized modeling method of parts and components library is proposed. The library of parts and components is building up with NX/Open development tools based on the three-dimensional design software platform. According to this method, the master model technique is integrated with top-down modeling method to facilitate the parameterized modeling and variant design of product family. The parameterized modeling process is also demonstrated in details in this paper. As an example, a tools management system for NC machine tools rapid design is developed. It shows hierarchical parameterized modeling method is a practical and effective method of constructing the product resources library.

APA, Harvard, Vancouver, ISO, and other styles

10

Shaker, George S. A., Mohamed H. Bakr, Nagula Sangary, and Safieddin Safavi-Naeini. "ACCELERATED ANTENNA DESIGN METHODOLOGY EXPLOITING PARAMETERIZED CAUCHY MODELS." Progress In Electromagnetics Research B 18 (2009): 279–309. http://dx.doi.org/10.2528/pierb09091109.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Zhu, Jiang, Limin Chen, and Ping Yuan Xi. "Design on Parameterized Drafting System of Centrifugal Fan." Applied Mechanics and Materials 34-35 (October 2010): 192–96. http://dx.doi.org/10.4028/www.scientific.net/amm.34-35.192.

Full text

Abstract:

The impeller is the important pneumatic part of centrifugal fan, and its structure performances are key factors which affect the whole performances of fan. The CAD module of centrifugal fan can realize the automation of aerodynamic force calculation. According to demands, computer can automatically complete aerodynamic force calculation and further determine major geometric parameters of impeller of fan. Speed coefficient and diametral quotient are two important parameters reflecting the character of ventilating fan. The relation curve between the speed coefficient and diametral quotient of various fans is plotted in this paper. The CAD module of impeller of centrifugal fan can realize such functions as aerodynamic design and parameterization drawing of impeller, and can accomplish rapid response from receiving design parameters to profiled impeller of fan, so that it can improve the quality of drawing.

APA, Harvard, Vancouver, ISO, and other styles

12

Peng, Ting, Qing Fa Zhang, and Xiao Ling Wang. "Parameterized Highway Tunnel Inner Contour Design with ObjectARX." Advanced Materials Research 1061-1062 (December 2014): 854–57. http://dx.doi.org/10.4028/www.scientific.net/amr.1061-1062.854.

Full text

Abstract:

With the rapid development of economy, dramatic changes have taken place in the highway tunnel industry. However, there is no professional computer aided design software for tunnel design available. Designers tend to spend lots of time to completing the design work. In order to reduce the repeating work of designers, this paper focuses on how to implement parametric design of highway tunnel inner contour with ObjectARX on the platform of CAD. In order to generate inner contour of highway tunnel automatically, parameterized design method is employed. Visual C++ 2010 is chosen as development environment of the computer aided contour design software. With proper control parameters inputted, it generates inner contour of highway tunnel automatically. According to the results, it is a promising approach to improve the design work of high design.

APA, Harvard, Vancouver, ISO, and other styles

13

Tan, S. T., M. M. F. Yuen, and K. M. Yu. "Parameterized Object Design Using a Geometrical Construction Representation." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 207, no. 1 (February 1993): 21–30. http://dx.doi.org/10.1243/pime_proc_1993_207_058_02.

Full text

Abstract:

This paper proposes a geometrical construction interpretation of variational geometry for achieving parameterized object definition. Vector geometry is used to represent the various kinds of geometrical entities while dimensions are defined to have directional sense. Geometrical constructions are then used to link up all geometrical entities and dimensions of a solid in a meaningful way, to represent the variational geometry properly. The geometrical construction scheme is implemented in a prototype modeller using polyhedral solids as examples.

APA, Harvard, Vancouver, ISO, and other styles

14

Zhang, Wei, Fengbao He, and Dilin Xiong. "Parameterized Geometric Design for Complex Helical Drill Point." Journal of Manufacturing Science and Engineering 127, no. 2 (April 25, 2005): 319–27. http://dx.doi.org/10.1115/1.1794162.

Full text

Abstract:

This paper presents the design method for complex helical drill point. Different from the conventional helical drill point generated by simultaneous rotation and translation of the drill blank, the complex helical drill point is ground by a supplementary swinging. Associated with these movements a series of grinding parameters are defined. There is another set of structural parameters, characteristic values (chisel angle, point angle, and clearance angle) manifesting the behavioral requirements of a drill. Relationships between these two sets of parameters are shown in curves. In accordance with drilling requirements, appropriate grinding parameters can be selected. The reliability of the proposed method is verified by drill point grinding experiment and measurement.

APA, Harvard, Vancouver, ISO, and other styles

15

Zhi, Ai Di, and Xi Hu Zhi. "Parameterized Design for Cylindrical Shaft Tapered Screw Blades." Advanced Materials Research 753-755 (August 2013): 1566–70. http://dx.doi.org/10.4028/www.scientific.net/amr.753-755.1566.

Full text

Abstract:

Screw blade is the essential part of a screw conveyer. The design of large scale, multiple blades screw conveyer involves complicated calculation and repeated work, is low in accuracy and efficiency. With parameterized design as the guiding principle, this article discusses the mathematical model for the development of cylindrical shaft tapered screw blade, and provides a VB based parameterized automatic drawing design method that allows arbitrary division of the helix angle, on the platform of AutoCAD. Practical experience has shown that the method improves design efficiency and accuracy, and is simple and pragmatic.

APA, Harvard, Vancouver, ISO, and other styles

16

Li, Ying Chun. "Design and Implementation of Parameterized Report Builder Component." Advanced Materials Research 756-759 (September 2013): 1230–33. http://dx.doi.org/10.4028/www.scientific.net/amr.756-759.1230.

Full text

Abstract:

At present ,People usually uses visual report design components to simplify the report design, But this means reducing the reusability of software development and working efficiency .Aiming To raise the efficiency and reuseability of software developing ,This paper introduces a new parameterzed Report Builder idea, and also gives the concrete design and implementation for this report generator based on .NET component technology . In this paper, the basic design idea, primary data structure, format calculation and printing algorithm for the report generator are also discussed in detail. And an applied instance of the generator is also given in this paper.

APA, Harvard, Vancouver, ISO, and other styles

17

Sarakinos, Sotirios S., Ioannis M. Valakos, and Ioannis K. Nikolos. "A software tool for generic parameterized aircraft design." Advances in Engineering Software 38, no. 1 (January 2007): 39–49. http://dx.doi.org/10.1016/j.advengsoft.2006.06.001.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Verroust, A., F. Schonek, and D. Roller. "Rule-oriented method for parameterized computer-aided design." Computer-Aided Design 24, no. 10 (October 1992): 531–40. http://dx.doi.org/10.1016/0010-4485(92)90040-h.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Chu, Changbao, Qing Xu, Xingjian Jia, Xingwang Zhang, and Yue Xiao. "Parameterized Structure Design of Giant-magnetostrictive Disc Brake." Journal of Physics: Conference Series 1865, no. 3 (April 1, 2021): 032031. http://dx.doi.org/10.1088/1742-6596/1865/3/032031.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Emmi, Michael, Rupak Majumdar, and Roman Manevich. "Parameterized verification of transactional memories." ACM SIGPLAN Notices 45, no. 6 (June 12, 2010): 134–45. http://dx.doi.org/10.1145/1809028.1806613.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Renganarayanan, Lakshminarayanan, DaeGon Kim, Sanjay Rajopadhye, and Michelle Mills Strout. "Parameterized tiled loops for free." ACM SIGPLAN Notices 42, no. 6 (June 10, 2007): 405–14. http://dx.doi.org/10.1145/1273442.1250780.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

GUO, JIUN-IN, CHIEN-CHANG LIN, and CHIH-DA CHIEN. "A LOW-POWER PARAMETERIZED HARDWARE DESIGN FOR THE ONE-DIMENSIONAL DISCRETE FOURIER TRANSFORM OF VARIABLE LENGTHS." Journal of Circuits, Systems and Computers 11, no. 04 (August 2002): 405–26. http://dx.doi.org/10.1142/s0218126602000549.

Full text

Abstract:

This paper presents a new low-power parameterized hardware design for the one-dimensional (1D) discrete Fourier transform (DFT) of variable lengths. By combining the cyclic convolution formulation, block-based distributed arithmetic (BDA), and Cooley–Tukey decomposition algorithm together, we have developed a parameterized hardware design for the DFT of variable lengths ranging from 256 to 4096 points and with different modes of performance. The proposed design can perform different lengths of DFT computation through the configuration of parameters, which not only provides the flexibility in computing different length DFT but also facilitates the performance-driven design considerations in terms of power consumption and processing speeds, that is, we can configure the proposed design in different modes of performance by setting different parameters. This feature is beneficial to developing a parameterized DFT soft Intellectual Property (IP) core or hard IP core for meeting the system requirements of different silicon-on-a-chip (SOC) applications as compared with the existing fixed length DFT designs.

APA, Harvard, Vancouver, ISO, and other styles

23

Zhang, Lan Ting. "Research and Application on Parameterized Modeling Technology of Shaft Part Based on Feature." Applied Mechanics and Materials 148-149 (December 2011): 548–51. http://dx.doi.org/10.4028/www.scientific.net/amm.148-149.548.

Full text

Abstract:

At present, parameterized design and feature modeling are the two main developing direction of CAD. Integrating feature modeling with parameterized technology is the effective method and measure to 3D design and modeling, which product feature is modeled by parameter. According to it’s characteristic, feature of shaft part is classified and described concretely, and feature information model is established in this paper. Feature modeling method and parameterized feature modeling technology of shaft part are studied and parameterized feature modeling module based on UG NX for shaft part is developed.

APA, Harvard, Vancouver, ISO, and other styles

24

Yan, Xiang Tong. "Parameterized Modeling of Parts Based on SolidWorks." Advanced Materials Research 346 (September 2011): 394–97. http://dx.doi.org/10.4028/www.scientific.net/amr.346.394.

Full text

Abstract:

According to the analysis of CAD technology and Solid Works software, the design idea and methodology of 3D modeling and parameterized design are put forward based on Solid Works, and the example of shearer drum model is used to introduce the modeling process in detail. The method will shorten the design time，increase the quality of design and provide useful help to quickly design of mechanical product.

APA, Harvard, Vancouver, ISO, and other styles

25

Jiang, Ying, and Jie Liu. "Computer Aided Design on Thin-Film Evaporator in Parametric Drawing." Applied Mechanics and Materials 201-202 (October 2012): 267–70. http://dx.doi.org/10.4028/www.scientific.net/amm.201-202.267.

Full text

Abstract:

This article introduces parameterized drawing technology on complete film evaporators by the classification of parameterized drawing strategy. And by sample of film evaporators parts graph drawing process, parametric parts prints and the assembly drawing strategy in detail. Development of aided design software of film evaporators would help users realize integration design of process design, and can greatly shorten the development cycle of the products, improve the design quality and enhance the competitiveness of their products.

APA, Harvard, Vancouver, ISO, and other styles

26

Reinbold, Christian, and Rüdiger Westermann. "Parameterized Splitting of Summed Volume Tables." Computer Graphics Forum 40, no. 3 (June 2021): 123–33. http://dx.doi.org/10.1111/cgf.14294.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Taylor, Sheldon, Owen Sharpe, and Jiju Peethambaran. "Prime gradient noise." Computational Visual Media 7, no. 3 (February 27, 2021): 349–62. http://dx.doi.org/10.1007/s41095-021-0206-z.

Full text

Abstract:

AbstractProcedural noise functions are fundamental tools in computer graphics used for synthesizing virtual geometry and texture patterns. Ideally, a procedural noise function should be compact, aperiodic, parameterized, and randomly accessible. Traditional lattice noise functions such as Perlin noise, however, exhibit periodicity due to the axial correlation induced while hashing the lattice vertices to the gradients. In this paper, we introduce a parameterized lattice noise called prime gradient noise (PGN) that minimizes discernible periodicity in the noise while enhancing the algorithmic efficiency. PGN utilizes prime gradients, a set of random unit vectors constructed from subsets of prime numbers plotted in polar coordinate system. To map axial indices of lattice vertices to prime gradients, PGN employs Szudzik pairing, a bijection F : ℕ2 → ℕ. Compositions of Szudzik pairing functions are used in higher dimensions. At the core of PGN is the ability to parameterize noise generation though prime sequence offsetting which facilitates the creation of fractal noise with varying levels of heterogeneity ranging from homogeneous to hybrid multifractals. A comparative spectral analysis of the proposed noise with other noises including lattice noises show that PGN significantly reduces axial correlation and hence, periodicity in the noise texture. We demonstrate the utility of the proposed noise function with several examples in procedural modeling, parameterized pattern synthesis, and solid texturing.

APA, Harvard, Vancouver, ISO, and other styles

28

Witkin, Andrew, Kurt Fleischer, and Alan Barr. "Energy constraints on parameterized models." ACM SIGGRAPH Computer Graphics 21, no. 4 (August 1987): 225–32. http://dx.doi.org/10.1145/37402.37429.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Taneva, Ina. "Information Design." American Economic Journal: Microeconomics 11, no. 4 (November 1, 2019): 151–85. http://dx.doi.org/10.1257/mic.20170351.

Full text

Abstract:

A designer commits to a signal distribution that is informative about a payoff-relevant state. Conditional upon the privately observed signals, agents take actions that affect their payoffs as well as those of the designer. We show how to derive the (designer) optimal information structure in static finite environments. We fully characterize it in a symmetric binary setting for a parameterized game. In this environment, conditionally independent private signals are never strictly optimal. (JEL C72, D78, D82, D83)

APA, Harvard, Vancouver, ISO, and other styles

30

Jin, Xiao Li, Ling Jing, and Bao Ji Ma. "Kneading Mixer Paddles Parameterized Modeling." Advanced Materials Research 655-657 (January 2013): 257–63. http://dx.doi.org/10.4028/www.scientific.net/amr.655-657.257.

Full text

Abstract:

To prepare for the Kneading Mixer paddles structure optimization,five independent parameters were selected to establish paddles, material pot diameter D, minimum clearance e, hollow paddle helix angle α2, and the angular velocity of two paddle ω1,ω2.Then establish geometric relationships and the constraints. And using pro / E software parameters-driven to achieve the parametric design of the complexity paddles.

APA, Harvard, Vancouver, ISO, and other styles

31

Li, Bin, and Bo Zhu. "Parameterized Computing System on Structure of Lift Scaffolding Attached to the Wall." Applied Mechanics and Materials 130-134 (October 2011): 3972–77. http://dx.doi.org/10.4028/www.scientific.net/amm.130-134.3972.

Full text

Abstract:

This paper focuses on the parameterized computing system on structure of lift scaffolding attached to the wall. Taking full advantage of the relevance between finite element analysis and computer programming, VB software as an input interface of the parameterized, and ANSYS finite element software to do the background analysis, the parametric program of APDL is automatically packaged and called when VB is used to do the second development on the ANSYS software. The structural parameterized design system of lift scaffolding attached to the wall is developed in this paper so that the calculation workload of body frame could be reduced. The details of the parameterized design system and related technologies are given in the paper.

APA, Harvard, Vancouver, ISO, and other styles

32

DAI, Lei. "3D Parameterized Shape Optimization Design for Machine Tool Mechanism." Chinese Journal of Mechanical Engineering 44, no. 05 (2008): 152. http://dx.doi.org/10.3901/jme.2008.05.152.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Duan, Mao Qiang, Xiao Li Huang, and Zhi Jia Yang. "IP Core Design for Parameterized (2,1,N) Convolutional Encodes." Applied Mechanics and Materials 336-338 (July 2013): 1463–68. http://dx.doi.org/10.4028/www.scientific.net/amm.336-338.1463.

Full text

Abstract:

In this paper, we design and implement general parameterized IP (Intellectual Property) cores of convolutional encoder with SMIC 0.35μm CMOS technology, serial structure and parallel structure respectively. And analyze each of the power dissipation using Synopsys PTPX tool. The result shows the parallel circuit structure saves 14 percent power dissipation compared to that of serial circuit structure, with the same encode radio. Meanwhile, computing speed of parallel structure with 8-bit parallelism is 8 times than that of serial structure under the same clock frequency. Certainly, serial circuit structure has their particular characters such as easily realized and less resource consumption.

APA, Harvard, Vancouver, ISO, and other styles

34

Butenkov, S., V. Krivsha, and N. Krivsha. "The Analytical Approach to the Parameterized Fuzzy Operators Design." Procedia Computer Science 150 (2019): 193–200. http://dx.doi.org/10.1016/j.procs.2019.02.038.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Eguia, Thom J., Sheldon X. D. Tan, Ruijing Shen, Duo Li, Eduardo H. Pacheco, Murli Tirumala, and Lingli Wang. "General Parameterized Thermal Modeling for High-Performance Microprocessor Design." IEEE Transactions on Very Large Scale Integration (VLSI) Systems 20, no. 2 (February 2012): 211–24. http://dx.doi.org/10.1109/tvlsi.2010.2098054.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Pobegailo, A. P. "Design of motion along parameterized curves using B-splines." Computer-Aided Design 35, no. 11 (September 2003): 1041–46. http://dx.doi.org/10.1016/s0010-4485(02)00178-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Qu, Z., R. A. Hull, and J. Wang. "Globally Stabilizing Adaptive Control Design for Nonlinearly-Parameterized Systems." IEEE Transactions on Automatic Control 51, no. 6 (June 2006): 1073–79. http://dx.doi.org/10.1109/tac.2006.876800.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Leonard, P. J., and M. B. Norton. "An object oriented approach to parameterized electrical machine design." IEEE Transactions on Magnetics 36, no. 4 (July 2000): 1687–91. http://dx.doi.org/10.1109/20.877767.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Khan, Mohammed Rajik, and Puneet Tandon. "Parameterized Geometric Design of a Generic Form Milling Cutter." Computer-Aided Design and Applications 10, no. 5 (January 2013): 757–65. http://dx.doi.org/10.3722/cadaps.2013.757-765.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Samad, T., and H. T. Su. "On the optimization aspects of parameterized neurocontrol (PNC) design." IEEE Transactions on Components, Packaging, and Manufacturing Technology: Part C 19, no. 1 (1996): 27–36. http://dx.doi.org/10.1109/3476.484202.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Zhu, Feng, Liqiang Dong, Honglei Ma, Cliff C. Chou, and King H. Yang. "Parameterized optimal design of a novel cellular energy absorber." International Journal of Mechanical Sciences 86 (September 2014): 60–68. http://dx.doi.org/10.1016/j.ijmecsci.2013.09.021.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Su, Dan, Jun Shen, and Hong Mei Zhao. "Parameterized Design for the Furniture Product Based on Solidworks." Advanced Materials Research 505 (April 2012): 402–6. http://dx.doi.org/10.4028/www.scientific.net/amr.505.402.

Full text

Abstract:

A method for parameterized design of Furniture product was presented and the Software Solidworks was further developed with VC++6.0 in this paper. Under the supporting of Solidworks, it was realized to vary the parameters of product to generate new one. As a result, the time and cost for the product development could be reduced greatly.

APA, Harvard, Vancouver, ISO, and other styles

43

Jin, Xiao Ping, Xue Liang Wang, En Rong Mao, and Zheng He Song. "An Expert System for Aided Design of Rice Transplanter Chassis Systems." Advanced Materials Research 655-657 (January 2013): 1710–13. http://dx.doi.org/10.4028/www.scientific.net/amr.655-657.1710.

Full text

Abstract:

The paper presents a structure and functions of an expert system for aided design of rice harvester chassis systems. It was developed on basis of a detailed analysis of the design process, including knowledge bases regarding chassis systems automated design, a community of parameterized parts and assemblies and interference engine. In the creation of the system, Visual C++, Pro/Engineering and Oracle database were used. This system is characterized by a rule-oriented representation of knowledge, forward chaining inference methods, and graphic representation of the design results by parameterized technology. The industrial application of this system proved its high reliability and accuracy.

APA, Harvard, Vancouver, ISO, and other styles

44

Gao, Hang, Jia Peng Yu, and Xue Shu Liu. "Development of 3D Parameterized Design System for Turbine Compressor Impellers." Materials Science Forum 532-533 (December 2006): 737–40. http://dx.doi.org/10.4028/www.scientific.net/msf.532-533.737.

Full text

Abstract:

Aiming at the characteristics of turbine compressor’s impellers, such as complexity in surface, assembled structure and variety in parameter, the step-by-step design thought is put forward, which realizes the high efficiency and visualization of parameterized design through distributing design parameters evenly to several phases or interfaces. According to the demand of the enterprise, SolidWorks CAD Software was chosen as the three-dimensional CAD platform, SQL Server 7.0 was chosen as the database management system, and Visual C++ was chosen for the programming language of secondary developing. Then the parameterized design system for series turbine compressor impellers is developed, which realizes automatic creation of 3D models and 2D engineering drawings using template technique.

APA, Harvard, Vancouver, ISO, and other styles

45

SITARAMAN, MURALI. "PERFORMANCE-PARAMETERIZED REUSABLE SOFTWARE COMPONENTS." International Journal of Software Engineering and Knowledge Engineering 02, no. 04 (December 1992): 567–87. http://dx.doi.org/10.1142/s0218194092000269.

Full text

Abstract:

Current programming languages support construction of parameterized reusable components that can be adapted and composed to create new functionality. For widespread reuse, software components must also have readily adaptable performance. This paper introduces language mechanisms for creating such performance-parameterized reusable software components and for controlling their performance by "plugging in" appropriate constituent components. A key element of the proposed approach is that it provides inexpensive performance tuning. It permits performance of a tunable component to be changed without modifications to the functionality of the component or its clients; in principle, without the need for re-compilation or re-validation of functionality.

APA, Harvard, Vancouver, ISO, and other styles

46

Rong, Zhang. "Concurrent Tolerance Design Based on Manufacturing Cost and Quality Loss." Applied Mechanics and Materials 687-691 (November 2014): 4996–99. http://dx.doi.org/10.4028/www.scientific.net/amm.687-691.4996.

Full text

Abstract:

With the constraints on manufacturing capacity, the satisfaction of product performance and the cost of manufacture are contradictory, the problem between high-performance and low-cost must be solved at the period of design and manufacture for product. To solve this problem, the product loss model has been analyzed, the parameterized and non-parameterized model of anticipant losses has been researched, with concurrent design, in connection with the product with multiple correlated assembly functional dimensions, the relation function between quality loss and process dimension tolerance has been provided, the concurrent tolerance design mathematical model based on lowest-cost and quality loss has been established. The applied case shows that this method has important guiding significance for engineering application.

APA, Harvard, Vancouver, ISO, and other styles

47

Kundu, Sudipta, Zachary Tatlock, and Sorin Lerner. "Proving optimizations correct using parameterized program equivalence." ACM SIGPLAN Notices 44, no. 6 (May 28, 2009): 327–37. http://dx.doi.org/10.1145/1543135.1542513.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Qin, Guo Hua, Hua Yu Zhu, Hai Chao Ye, and Mei Dan Zhou. "Advanced Development Method of the Standard Fixel Library for Computer Aided Fixture Design." Advanced Materials Research 421 (December 2011): 373–76. http://dx.doi.org/10.4028/www.scientific.net/amr.421.373.

Full text

Abstract:

In order to efficiently design a fixture, it is necessary to establish a standard fixel library for CAFD system. Therefore, a SQL Server-based development technology is first employed to manage the parameterized fixel models. And then, in order to construct a fixel model, MFC is adopted to carry out the secondary development of Unigraph environment. Thus, arbitrary fixel can be dimension-drive designed according to a parameterized fixel model. The establishment of the fixel library can to a great extent reduce the trivial and repetitive tasks in the fixture design.

APA, Harvard, Vancouver, ISO, and other styles

49

Zhao, Yu Qian, and Xiu Feng Tan. "The System Design and Parameterized Modeling of Juice Extractor Screw." Applied Mechanics and Materials 397-400 (September 2013): 625–28. http://dx.doi.org/10.4028/www.scientific.net/amm.397-400.625.

Full text

Abstract:

The ordinary screw designed in traditional method will increase the power consumption and decrease the juice yield in the process of squeeze. Presented the system design of juice extractor firstly, then used the UG software and dimension driving technology to construct the 3d model entity of the screw with variable pitches and diameters, followed by systems three-dimensional model. Finished the static analysis of the screw blade by ANSYS, completing a follow-up study of parameterized modeling.

APA, Harvard, Vancouver, ISO, and other styles

50

Zhao, Hong Mei, Dan Su, Zhi Mei Shao, and Hong Gang Li. "The System Design of Spiral Drum Based on Parameterized Modules." Advanced Materials Research 189-193 (February 2011): 2842–46. http://dx.doi.org/10.4028/www.scientific.net/amr.189-193.2842.

Full text

Abstract:

In order to make the spiral drum has a good performance and human-computer interaction function. This paper made the spiral drum module division base on the modularization theory and parametric design. Built the 3 D parametric model of spiral drum by Pro / E software, completed the assembly of spiral drum parts, and analyzed the interference of each component, consequently, improved the accuracy of the design. It also can made parametric driving for relative modular as user different needs for spiral drum design. namely, it can got the 3-D model and assembly drawing, and can achieve the goal of improving the drum design efficiency.

APA, Harvard, Vancouver, ISO, and other styles

Journal articles on the topic 'Parameterized design'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles