Relevant bibliographies by topics / Parameters calculation

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Parameters calculation'

Author: Grafiati
Published: 4 June 2021
Last updated: 4 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Parameters calculation.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Parameters calculation"

1

Eliseev, Mikhail Semenovih, Ivan Ivanovich Eliseev, Dmitriy Alekseevich Rybalkin, and Aleksey Maksimovich Maradudin. "Calculation of a volumetric liquid dispenser." Agrarian Scientific Journal, no. 12 (December 15, 2019): 90–93. http://dx.doi.org/10.28983/asj.y2019i12pp90-93.

Full text
Abstract:
The article considers the theoretical calculation of a volumetric liquid dispenser. As a result of the calculations, a formula was obtained that relates all the main parameters of the dispenser to the angular speed of rotation of the metering tank, which allows calculating design and operating parameters of the metering devices.
APA, Harvard, Vancouver, ISO, and other styles
2

Dudás, Zoltán. "Equations and Verification of New Diffusion Parameters." Materials Science Forum 589 (June 2008): 293–97. http://dx.doi.org/10.4028/www.scientific.net/msf.589.293.

Full text
Abstract:
This document shows the equations and some calculation results of two new Diffusion parameters. The Diffusion parameters assist the calculation of different temperature or time values for equivalent diffusion processes. The Diffusion parameters include temperature dependent and temperature independent factors. The document shows that the introduced Diffusion parameter is suitable for the accurate calculations of the temperature and time values for equal simple diffusion processes. The document shows, that the frequently used Larson-Miller parameter (LMP) does not give accurate results if we use the temperature and time values of equal simple diffusion equations for the LMP calculations.
APA, Harvard, Vancouver, ISO, and other styles
3

Kmita-Fudalej, Gabriela, Włodzimierz Szewczyk, and Zbigniew Kołakowski. "Calculation of Honeycomb Paperboard Resistance to Edge Crush Test." Materials 13, no. 7 (April 6, 2020): 1706. http://dx.doi.org/10.3390/ma13071706.

Full text
Abstract:
The article presents the method of calculating the edge crush test (ECT) of honeycomb paperboard. Calculations were made on the basis of mechanical properties of paper raw materials used for the production of cellular paperboard and geometrical parameters describing cellular paperboard. The presented method allows ECT calculation of honeycomb paperboard in the main directions in the paperboard plane; i.e., machine direction (MD) and cross direction (CD). The proposed method was verified by comparing the results of calculations with the results of ECT measurements of paperboard with different geometrical parameters made of different fibrous materials.
APA, Harvard, Vancouver, ISO, and other styles
4

Kolesnyk, Vasyl, and Volodymyr Orlyk. "Methods of Parameters Calculation for Wastes High-Temperature Plasma Processing." Chemistry & Chemical Technology 9, no. 1 (March 15, 2015): 85–89. http://dx.doi.org/10.23939/chcht09.01.085.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

VENDIN, SERGEY, SERGEY SOLOV’EV, STANISLAV KILIN, and ALEXEY YAKOVLEV. "CALCULATION OF CORONA DISCHARGE PARAMETERS FOR MULTI-WIRE LIGHTNING PROTECTION." Elektrotekhnologii i elektrooborudovanie v APK 4, no. 41 (December 2020): 17–28. http://dx.doi.org/10.22314/2658-4859-2020-67-4-17-28.

Full text
Abstract:
The article presents the results of theoretical calculating the parameters of a corona discharge when protecting the territory of substations from direct lightning strikes using multi-drop lightning protection. The parameters of the corona discharge are important when calculating the energy losses in the wires of overhead power lines in bad weather. (Research purpose) The research purpose is in developing a computational model and analyze the processes of lightning protection of a substation by placing parallel grounded cables suspended on supports that are placed outside the substation territory. (Materials and methods) The solution is based on a well-known relation for a typical dipole model of a charged thundercloud cell. (Results and discussion) The article present the calculated theoretical dependences, mathematical formulation and algorithm for numerical calculation of the two-dimensional problem that form the basis for calculating multi-wire lightning protection, as well as the calculation results of cable lightning protection of a transformer substation based on two-dimensional numerical modeling and comparison of the results of calculations using analytical expressions with the results of two-dimensional numerical modeling. Despite the noticeable difference between the limit currents calculated by different methods, the difference between the average current between them is small compared to the currents themselves, so one can use its arithmetic mean to determine the actual current. (Conclusions) The obtained results allow to take into account changes in the parameters of the corona formed in the electric field of a thundercloud along its cable length due to its sag, since such changes in the input parameters have a noticeable effect on the corona process, in some cases it is more significant than the effect associated with the actual sag of the cables.
APA, Harvard, Vancouver, ISO, and other styles
6

Tokarev, Pavel N. "ANALYTICAL CALCULATION OF THE PARAMETERS." Russian Journal of Water Transport, no. 64 (August 29, 2020): 207–14. http://dx.doi.org/10.37890/jwt.vi64.112.

Full text
Abstract:
The skipper must be well aware of the maneuverability of his vessel, as well as the capabilities of the ship's controls to perform a particular maneuver. In the» Information «about the parameters of turnability, which is available on the ship, there is no data on the performance of such an important maneuver as «turn in place», which is often used in a confined area of water. Some assumptions have been taken in this article and the solution of the system of equations of the motion of the vessel in relation to the considered maneuver is proposed. The author obtained analytical expressions for calculation of angular speed and the angle of turn of the vessel at the time of the maneuver of «acceleration», the rotation by inertia and active damping rotational inertia. Using the obtained expressions, the calculation of the parameters of the turnover of the project 507 ship was performed. Graphs of the dependence of the angular speed and the angle of rotation of the vessel on the maneuver time are given.
APA, Harvard, Vancouver, ISO, and other styles
7

Nikulicheva, O. N., V. P. Fadeeva, and V. A. Logvinenko. "Calculation of the kinetic parameters." Journal of Thermal Analysis 47, no. 6 (December 1996): 1629–38. http://dx.doi.org/10.1007/bf01980909.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Khaimovich, A. I., and A. A. Stepanov. "Automated calculation of broaching parameters." Russian Engineering Research 35, no. 8 (August 2015): 615–16. http://dx.doi.org/10.3103/s1068798x15080079.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Misra, S., and B. B. Deo. "Calculation of nonperturbative QCD parameters." Physical Review D 34, no. 1 (July 1, 1986): 254–57. http://dx.doi.org/10.1103/physrevd.34.254.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Heidler, F., J. M. Cvetic, and B. V. Stanic. "Calculation of lightning current parameters." IEEE Transactions on Power Delivery 14, no. 2 (April 1999): 399–404. http://dx.doi.org/10.1109/61.754080.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Parameters calculation"

1

Grainger, Roy Gordon. "The calculation of cloud parameters from AVHRR data." Thesis, University of Auckland, 1990. http://hdl.handle.net/2292/2446.

Full text
Abstract:
This thesis deals with the electromagnetic radiation that is reflected from and emitted by a clear or cloudy terrestrial atmosphere. Calculations are performed in order to estimate the radiation exitant to space in the visible, the near visible, and the two infrared windows at approximately 4 μm and 11 μm. The NOAA-9 satellite Advanced Very High Resolution Radiometer (AVHRR/2) is used as the data acquisition system. The satellite AVHRR system is described, as well as future TIROSN satellites. The pre-launch calibration of the radiometer is described in some detail. Post-launch calibration is examined using a reflectance difference method. The radiometer gains are shown to have changed by more than 20% from their pre-launch values. A LOWTRAN based atmospheric model suitable for New Zealand is developed to provide cloud free transmission values. Atmospheric scattering is shown to contribute negligibly to visible cloud measurements (for 8-bit radiometer resolution). The Channels 1 to 3 terrestrial reflectance is averaged from more than two years of satellite data. Sea-surface state is examined as a function of windspeed. A method of extracting surface temperature in rugged terrain is developed. Dual temperature measurements at 10.8 and 11.8 μm are used to estimate surface air temperature. The transfer of radiation in a single layer cloud is calculated as a function of cloud thickness, observation/illumination geometry and the effective radius of the cloud drop-distribution. The variation in drop-size is contained in an ensemble of modified-Gamma distributions whose effective radius varies from 1 to 30 μm with a fixed dispersion of 0.25. A technique is established which allows effective cloud radius to be estimated from 3.7 μm AVHRR/2 imagery. The radiation values at 0.65 μm and 11.8 μm are used to correct the 3.7 μm reflectance for variation in cloud thickness and temperature respectively. The procedure is limited to warm clouds of moderate optical depth. In addition, the inversion process generates values of cloud top height and temperature, cloud depth and column liquid water content. The method is used to observe the development of orographic cloud formed over the southern half of the North Island of New Zealand. The inversion results for this type of cloud are in agreement with aircraft measurements carried out by the New Zealand Meteorological Service and are well fitted by a simple drop-growth model.
APA, Harvard, Vancouver, ISO, and other styles
2

Yates, Jonathan Robert. "First principles calculation of nuclear magnetic resonance parameters." Thesis, University of Cambridge, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.428437.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Asher, James. "Inclusion of dynamical effects in calculation of EPR parameters." Doctoral thesis, [S.l.] : [s.n.], 2006. http://deposit.ddb.de/cgi-bin/dokserv?idn=985600527.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Manolatou, Christina. "Calculation of effective electromagnetic parameters of helix loaded composites." Thesis, Massachusetts Institute of Technology, 1995. http://hdl.handle.net/1721.1/36970.

Full text
Abstract:
Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 1995.
Includes bibliographical references (p. 101-104).
by Christina Manolatou.
M.S.
APA, Harvard, Vancouver, ISO, and other styles
5

Robinson, Michael J. "Finite element calculation of equivalent circuit parameters for induction motors." Thesis, Imperial College London, 1988. http://hdl.handle.net/10044/1/8003.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

McFarland, Robert Bynum 1964. "Calculation of transmission line parameters for multiconductor lines in a multi-dielectric medium." Thesis, The University of Arizona, 1992. http://hdl.handle.net/10150/278111.

Full text
Abstract:
A method for computing the per-unit-length capacitance matrix and the inductance matrix for multiconductor transmission lines in a multi-dielectric medium is presented. The multi-dielectric medium consists of both planar and non-planar dielectric regions. The formulation is based on an integral equation method for the free charge distribution on conductor surfaces and the polarization charge distribution on the non-planar dielectric interfaces. The kernel of the integral equation is a space domain Green's function for a layered medium. The numerical solution is obtained by the method of moments.
APA, Harvard, Vancouver, ISO, and other styles
7

Simonis, Cinzia. "Parallel calculation and analysis of spine kinematic parameters using videofluoroscopy and image processing." Thesis, University of Southampton, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.261533.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Yin, Yanan. "Calculation of frequency-dependent parameters of underground power cables with finite element method." Thesis, University of British Columbia, 1990. http://hdl.handle.net/2429/31119.

Full text
Abstract:
In this thesis, the finite element method (FEM) is applied to the calculation of frequency-dependent series impedances and shunt capacitances of underground power cables. The principal equations describing the quasi-magnetic fields and static electric fields are solved with FEM based on the Galerkin technique. The Js method and the loss-energy method are derived to calculate the impedances of a multiconductor system from its field solution, and the energy method and the surface charge method are derived to calculate the capacitances. With a single-core (SC) coaxial cable, the suitability of quadratic isoparametric elements and high-order simplex elements are studied, and a suitable division scheme is suggested for the auto-mesh program. The conventional FEM with a field truncation boundary is applied to the impedance calculation of buried SC cables. Suitable locations for the field truncation boundary and division schemes in the earth are studied. The results show that rb ≥ 12[symbol omitted] is required to obtain accurate impedances of shallowly buried cables with the conventional FEM. This requires a large solution region in the earth at low frequencies. A new technique based on the perturbation concept is proposed to reduce the solution region in the earth. Comparisons between the results from the conventional FEM and from the proposed technique with a significantly reduced solution region in the earth show good agreement. In the case studies, the FEM is applied to the parameter calculation of multiphase SC cables, PT cables, sector-shaped cables, and stranded conductors. The numerical results are compared with those from analytical formulas.
Applied Science, Faculty of
Electrical and Computer Engineering, Department of
Graduate
APA, Harvard, Vancouver, ISO, and other styles
9

Chilà, Deborah. "Dose tracking in radiation oncology using daily CBCT: effects of physical parameters on dose calculation accuracy." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2020. http://amslaurea.unibo.it/20587/.

Full text
Abstract:
The availability of cone beam computerized tomography (CBCT) images at the time of treatment has opened possibilities for recalculations and tracking of the delivered dose, becoming an effective tool for adaptive radiotherapy. A significant component in the accuracy of dose recalculation on CBCT images is the calibration of the Hounsfield units (HU) to density. The aim of this thesis, developed at the Policlinic of Modena, is to assert a methodology for the characterization of the HU-to-density calibration curve, and to evaluate the impact of the calibration phantom inserts composition and phantom volume on dose calculation accuracy. The HU-to-density calibration curves from four different phantoms were measured and compared. The HU output of a kV CBCT scan depends on the physical parameters of the phantom density inserts, with particular reference to the atomic number (Z), due to the photoelectric effect which is the main radiation-matter interaction at kV energies. The phantom radial diameter also influences the HU values on the image. The effect of scattering and beam hardening was examined as a function of phantom diameter, founding a high deviation on the HU value of the same density insert when varying the radial diameter of the phantom, especially for high densities. When we are dealing with CBCTs also the acquisition parameters influence the resulting image, that’s why we will show that a protocol-specific calibration curve is needed. The resulting calibration curves were used to compare the calculated doses against planned ones. The percent difference between recalculated and planned dose was obtained for chosen clinically important dose levels and a box plot analysis was conducted. Results show that the best calibration curve for dose recalculation on CBCT images has been obtained when a human-tissue-equivalent inserts are used and when the radial diameter of the phantom is close to the dimensions of the real patient.
APA, Harvard, Vancouver, ISO, and other styles
10

Radchenko, Taras, Valentyn Tatarenko, and Sergiy Bokoch. "Calculation of diffusivities in ordering f.c.c. alloy by the kinetic data about short- and long-range order parameters’ relaxation: Calculation of diffusivities in ordering f.c.c. alloy by the kineticdata about short- and long-range order parameters’ relaxation." Diffusion fundamentals 2 (2005) 57, S. 1-2, 2005. https://ul.qucosa.de/id/qucosa%3A14390.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Parameters calculation"

1

Lesnoff, Matthieu, Renaud Lancelot, Charles-Henri Moulin, Samir Messad, Xavier Juanès, and Christian Sahut. Calculation of Demographic Parameters in Tropical Livestock Herds. Dordrecht: Springer Netherlands, 2014. http://dx.doi.org/10.1007/978-94-017-9026-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Yeh, J. J. Atomic calculation of photoionization cross-sections and asymmetry parameters. Langhorne, PA: Gordon & Breach Science, Publishers, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Aseev, G. G. Electrolytes, methods for calculation of the physicochemical parameters of multicomponent systems. New York: Begell House, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Guidance material on the calculation of climatic parameters used for building purposes. Geneva, Switzerland: Secretariat of the World Meteorological Organization, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Vogelsang, M. Measurement and calculation of parameters for local fracture criteria on notched tensile specimens. Manchester: UMIST, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Tan, Xiao-nan. Systolic calculation of parameters for optimal routing in a type of shuffle-exchange network. Toronto: University of Toronto, Computer Systems Research Institute, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Künzel, Hartwig M. Simultaneous heat and moisture transport in building components: One- and two-dimensional calculation using simple parameters. Stuttgart: IRB Verlag, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Evstaf'ev, Andrey, Mihail Izvarin, and Aleksandr Maznev. Dynamics of electric rolling stock. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1013692.

Full text
Abstract:
The textbook describes the physical foundations, theory, principles of selection and calculation of the main parameters of spring suspension schemes, discusses the issues of fitting crews into curves, vertical dynamics of the traction drive, the use of coupling weight and vibrations of electric rolling stock. It is intended for the training of certified specialists in the direction of "Railway rolling stock".
APA, Harvard, Vancouver, ISO, and other styles
9

Evstaf'ev, Andrey, and Aleksandr Maznev. Design and dynamics of electric rolling stock. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1014666.

Full text
Abstract:
The physical foundations, theory, principles of selection and calculation of the main parameters of spring suspension schemes are presented, the issues of fitting crews into curves, the dynamics of traction drive, the use of coupling weight and vibrations of electric rolling stock, and the design features of modern locomotives are considered. For students and teachers, as well as anyone interested in this topic.
APA, Harvard, Vancouver, ISO, and other styles
10

Biryulin, Vladimir, Aleksey None, Dar'ya Kudelina, Oleg Larin, and Anton Tancyura. Relay protection and automation systems elektroenergeticheskim. ru: INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/1058880.

Full text
Abstract:
The manual includes basic information about the element base of relay protection and automation, principles of operation and circuit implementation of various types of relay protection and automation systems, algorithms of calculation of parameters of the action of relay protection and automation. Designed for students in specialty "power and electrical engineering", as well as professionals involved in the design and operation of relay protection and automation of electric power systems.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Parameters calculation"

1

Tang, Yiqun, Jie Zhou, Ping Yang, Jingjing Yan, and Nianqing Zhou. "Hydrogeological Parameters Calculation." In Springer Environmental Science and Engineering, 35–111. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-48581-1_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Tang, Yiqun, Jie Zhou, Ping Yang, Jingjing Yan, and Nianqing Zhou. "Hydrogeological Parameters Calculation." In Springer Natural Hazards, 35–111. Singapore: Springer Singapore, 2016. http://dx.doi.org/10.1007/978-981-10-0669-2_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Byron, Olwyn. "Introduction: Calculation of Hydrodynamic Parameters." In Analytical Ultracentrifugation, 147–67. Tokyo: Springer Japan, 2016. http://dx.doi.org/10.1007/978-4-431-55985-6_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Schwerdtfeger, Peter, Markus Pernpointner, and Witold Nazarewicz. "Calculation of Nuclear Quadrupole Coupling Constants." In Calculation of NMR and EPR Parameters, 279–91. Weinheim, FRG: Wiley-VCH Verlag GmbH & Co. KGaA, 2004. http://dx.doi.org/10.1002/3527601678.ch17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ruden, Torgeir A., and Kenneth Ruud. "Ro-Vibrational Corrections to NMR Parameters." In Calculation of NMR and EPR Parameters, 153–73. Weinheim, FRG: Wiley-VCH Verlag GmbH & Co. KGaA, 2004. http://dx.doi.org/10.1002/3527601678.ch10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Siehl, Hans-Ullrich, and Valerije Vrček. "Calculation of NMR Parameters in Carbocation Chemistry." In Calculation of NMR and EPR Parameters, 371–94. Weinheim, FRG: Wiley-VCH Verlag GmbH & Co. KGaA, 2004. http://dx.doi.org/10.1002/3527601678.ch23.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Case, David A. "NMR Parameters in Proteins and Nucleic Acids." In Calculation of NMR and EPR Parameters, 339–51. Weinheim, FRG: Wiley-VCH Verlag GmbH & Co. KGaA, 2004. http://dx.doi.org/10.1002/3527601678.ch21.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kaupp, Martin, Michael Bühl, and Vladimir G. Malkin. "Introduction: The Quantum Chemical Calculation of NMR and EPR Parameters." In Calculation of NMR and EPR Parameters, 1–5. Weinheim, FRG: Wiley-VCH Verlag GmbH & Co. KGaA, 2004. http://dx.doi.org/10.1002/3527601678.ch1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Searles, Debra J., and Hanspeter Huber. "Molecular Dynamics and NMR Parameter Calculations." In Calculation of NMR and EPR Parameters, 175–89. Weinheim, FRG: Wiley-VCH Verlag GmbH & Co. KGaA, 2004. http://dx.doi.org/10.1002/3527601678.ch11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ciofini, Ilaria. "Use of Continuum Solvent Models in Magnetic Resonance Parameter Calculations." In Calculation of NMR and EPR Parameters, 191–208. Weinheim, FRG: Wiley-VCH Verlag GmbH & Co. KGaA, 2004. http://dx.doi.org/10.1002/3527601678.ch12.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Parameters calculation"

1

Lou, Jianquan, Alpesh Bhobe, Yingchun Shu, and Jinghan Yu. "Analytical calculation of transformer parameters by S-parameters." In 2018 IEEE International Symposium on Electromagnetic Compatibility and 2018 IEEE Asia-Pacific Symposium on Electromagnetic Compatibility (EMC/APEMC). IEEE, 2018. http://dx.doi.org/10.1109/isemc.2018.8394001.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kubinec, Peter, Oldrich Ondracek, Miroslav Hagara, Adam Fibich, and Tomas Bagala. "Reverberator's late reflections parameters calculation." In 2018 28th International Conference Radioelektronika (RADIOELEKTRONIKA). IEEE, 2018. http://dx.doi.org/10.1109/radioelek.2018.8376378.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Noskov, V. Ya, K. A. Ignatkov, A. P. Chupahin, G. P. Ermak, and A. S. Vasyliev. "Calculation of autodyne radar noise parameters." In 2016 9th International Kharkiv Symposium on Physics and Engineering of Microwaves, Millimeter and Submillimeter Waves (MSMW). IEEE, 2016. http://dx.doi.org/10.1109/msmw.2016.7538099.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bedareva, E. V., and L. I. Khudonogova. "Calculation of resistive current transducer parameters." In 2014 International Conference on Mechanical Engineering, Automation and Control Systems (MEACS). IEEE, 2014. http://dx.doi.org/10.1109/meacs.2014.6986856.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Wajnert, Dawid, Bronislaw Tomczuk, and Dariusz Koteras. "Calculation of the magnetic bearing parameters." In 2017 International Symposium on Electrical Machines (SME). IEEE, 2017. http://dx.doi.org/10.1109/isem.2017.7993537.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kuchak, Sergey V., Petr A. Bachurin, and Sergey A. Kharitonov. "Calculation of Energy Storage System Parameters." In 2020 21st International Conference of Young Specialists on Micro/Nanotechnologies and Electron Devices (EDM). IEEE, 2020. http://dx.doi.org/10.1109/edm49804.2020.9153339.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Cherkasov, M. R. "Spectrum shape impact relaxation parameters calculation." In High Resolution Molecular Spectroscopy: 11th Symposium and School, edited by Alexander I. Nadezhdinskii, Yu V. Ponomarev, and Leonid N. Sinitsa. SPIE, 1994. http://dx.doi.org/10.1117/12.166238.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Sodsee, Sunantha, Maytiyanin Komkhao, Herwig Unger, and Phayung Meesad. "An Extended Pagerank Calculation Including Network Parameters." In Annual International Conference on Computer Science Education: Innovation & Technology CSEIT 2010 & Annual International Conference on Software Engineering SE 2010. Global Science and Technology Forum, 2010. http://dx.doi.org/10.5176/978-981-08-7466-7_kd-14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Marčič, Milan. "Calculation of the Diesel Fuel Injection Parameters." In International Off-Highway & Powerplant Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1995. http://dx.doi.org/10.4271/952071.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Li, Feifei, and Maoqing Ye. "Calculation of Flicker Parameters Using Voltage Interharmonics." In 2012 IEEE PES Asia-Pacific Power and Energy Engineering Conference (APPEEC). IEEE, 2012. http://dx.doi.org/10.1109/appeec.2012.6307444.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Parameters calculation"

1

Hanson A. L. and Diamond D. Calculation of Kinetics Parameters for the NBSR. Office of Scientific and Technical Information (OSTI), March 2012. http://dx.doi.org/10.2172/1043393.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Goncharoff, V., E. VonColln, and R. Morris. Efficient Calculation of Spectral Tilt from Various LPC Parameters,. Fort Belvoir, VA: Defense Technical Information Center, May 1996. http://dx.doi.org/10.21236/ada308580.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Schreckhise, R. G., K. Rhoads, B. A. Napier, J. V. Ramsdell, and J. S. Davis. Recommended environmental dose calculation methods and Hanford-specific parameters. Office of Scientific and Technical Information (OSTI), March 1993. http://dx.doi.org/10.2172/6501437.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Schreckhise, R. G., K. Rhoads, B. A. Napier, J. V. Ramsdell, and J. S. Davis. Recommended environmental dose calculation methods and Hanford-specific parameters. Revision 2. Office of Scientific and Technical Information (OSTI), March 1993. http://dx.doi.org/10.2172/10151689.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Hanson, A. L., and D. Diamond. Calculation of Design Parameters for an Equilibrium LEU Core in the NBSR. Office of Scientific and Technical Information (OSTI), September 2011. http://dx.doi.org/10.2172/1030634.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Grinstein, B., and Meng-Yuan Wang. An effective field theory calculation of the QCD corrections to weak parameters. Office of Scientific and Technical Information (OSTI), November 1991. http://dx.doi.org/10.2172/68160.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Xu, Jianming. The Calculation of the Influence on Beam Parameters in RHIC and Beam Size in Transport Line due to Change of AGS Beam Parameters. Office of Scientific and Technical Information (OSTI), October 1990. http://dx.doi.org/10.2172/1119147.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Hanson A. L. and Diamond D. Calculation of Design Parameters for an Equilibrium LEU Core in the NBSR using a U7Mo Dispersion Fuel. Office of Scientific and Technical Information (OSTI), June 2014. http://dx.doi.org/10.2172/1134663.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Khaleel, R., and Will Nichols. Calculation of Moisture-Dependent Anisotropic Parameters Supporting the Hanford Site's Composite Analysis, Cumulative Impact Evaluation, and Performance Assessments. Office of Scientific and Technical Information (OSTI), January 2020. http://dx.doi.org/10.2172/1595470.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

de Vries, M., W. van Dijk, J. A. de Boer, M. H. A. de Haan, J. Oenema, J. Verloop, and L. A. Lagerwerf. Calculation rules of the Annual Nutrient Cycling Assessment (ANCA) 2019 : background information about farm-specific excretion parameters (update of ANCA report 2018). Wageningen: Wageningen Livestock Research, 2020. http://dx.doi.org/10.18174/533905.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Parameters calculation' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography