Relevant bibliographies by topics / Parameters of the thermal floor

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Parameters of the thermal floor'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Parameters of the thermal floor.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Parameters of the thermal floor"

1

Safaa Oubenmoh, Afaf Charraou, Rachid Saadani, et al. "Thermal Performance Analysis of Functional Parameters of the Floor Heating System in Africa." Statistics, Optimization & Information Computing 11, no. 1 (2023): 154–67. http://dx.doi.org/10.19139/soic-2310-5070-1551.

Full text
Abstract:
Buildings frequently utilize radiant heating floors because they offer benefits including effective use of space and homogeneous temperature distribution, which results in increased thermal comfort. The present work aims to investigate the perfect use of floor heating systems analytically and numerically with improved thermal performance to prove their efffficiency in various African climates. The evaluation depends on the functional parameters of the heating system and particularly focuses on floor surface temperature to acquire the desired heat flux and the perfect supply water temperature.
APA, Harvard, Vancouver, ISO, and other styles
2

Charraou, Afaf, Safaa Oubenmoh, Amina Mourid, Rachid Saadani, Miloud Rahmoune, and Mustapha El Alami. "Numerical modeling and sensitivity analysis of the thermal behavior of an underfloor heating system using COMSOL Multiphysics software." E3S Web of Conferences 469 (2023): 00018. http://dx.doi.org/10.1051/e3sconf/202346900018.

Full text
Abstract:
Due to their many advantages over conventional heating systems, underfloor heating systems have seen an increase in their use, particularly in the residential, commercial, and industrial sectors. The main objective of this work is to carry out a parametric study to predict the thermal behavior of various heating floor construction type, such as homogeneous floor, single layer floor and double layer floors, under the variation of several construction and operation parameters, using a numerical simulator for the three-dimensional calculation in a transient state. The results obtained by numerica
APA, Harvard, Vancouver, ISO, and other styles
3

Brzyski, Grudzińska, and Majerek. "Analysis of the Occurrence of Thermal Bridges in Several Variants of Connections of the Wall and the Ground Floor in Construction Technology with the Use of a Hemp–lime Composite." Materials 12, no. 15 (2019): 2392. http://dx.doi.org/10.3390/ma12152392.

Full text
Abstract:
This article analyses the connection of the two types of floors on the ground (floors on joists and self-supporting floors), with the external wall made of a hemp–lime composite for the occurrence of thermal bridges. Several factors that may affect the heat transfer in the junction were taken into account: the level of the floor on the ground, the wall thickness, the thermal conductivity of the composite, and the location of the timber frame construction. The technology of using hemp and lime is relatively new, and there is a lack of such analyses in the literature. The two-dimensional (2D) he
APA, Harvard, Vancouver, ISO, and other styles
4

Elhadad, Sara, and Zoltan Orban. "A Sensitivity Analysis for Thermal Performance of Building Envelope Design Parameters." Sustainability 13, no. 24 (2021): 14018. http://dx.doi.org/10.3390/su132414018.

Full text
Abstract:
Sensitivity analysis is crucial in building energy assessments. It is used to determine the major variables influencing building thermal performance, using both observational research and energy simulation models. This study investigates the most influential envelope design parameters on the thermal performance of a typical residential building in Budapest, Hungary. Sensitivity analysis is used in conjunction with the IDA-Indoor and Climate Energy (IDA-ICE 4.8) simulation tool to assess the effects of 33 envelope design parameters for energy consumption and carbon dioxide concentrations. The i
APA, Harvard, Vancouver, ISO, and other styles
5

Kuz’michev, Aleksey V., and Dmitriy A. Tikhomirov. "Dependence of Air Temperature, Enclosing Structures and Floor in Livestock Premises." Elektrotekhnologii i elektrooborudovanie v APK, no. 3 (September 20, 2020): 50–54. http://dx.doi.org/10.22314/2658-4859-2020-67-3-50-54.

Full text
Abstract:
The comfort of the animals is determined by temperature factors, such as air temperature, radiation temperature of the room and floor. For a reasonable technical decision on the choice of power equipment for creating normal conditions for keeping animals, it is necessary to identify possible variations in the temperature parameters of the environment in the animal housing zone. (Research purpose) The research purpose is in considering the models for calculating heat losses to the ground and determining the limit values for changes in floor temperature in areas where animals are housed. (Materi
APA, Harvard, Vancouver, ISO, and other styles
6

Karimi, Morteza, Junpeng Lai, Johar Pourghader, and Ronald Miles. "Microphone diaphragm thermal noise floor measurement using a laser vibrometer." Journal of the Acoustical Society of America 155, no. 3_Supplement (2024): A261. http://dx.doi.org/10.1121/10.0027430.

Full text
Abstract:
The response of a microphone to thermal noise can be extremely difficult to predict and can adversely affect the performance of a given design. The direct measurement of the thermal noise floor of a microphone diaphragm could greatly improve our understanding of the parameters that affect the noise performance. A laser vibrometer can serve as a powerful tool, enabling precise and non-intrusive measurements of the diaphragm thermal noise. The experimental setup for measuring the diaphragm thermal noise using a laser vibrometer is described. Having both the noise floor, and the response to sound
APA, Harvard, Vancouver, ISO, and other styles
7

Kovalov, Andrіі, Volodymyr Konoval, Anastasiia Khmyrova, and Kateryna Dudko. "Parameters for simulation of the thermal state and fire-resistant quality of hollow-core floors used in the mining industry." E3S Web of Conferences 123 (2019): 01022. http://dx.doi.org/10.1051/e3sconf/201912301022.

Full text
Abstract:
The statistical data of the fire and technogenic safety in Ukrainian mines have been studied. A literary analysis has been made of advanced expertise in determining the fire resistance of building structures. It has been studied the thermal state and fire resistance of hollow-core floors using the fire tests and the calculated determination of the fire resistance degree of a structure based on a two-dimensional model of thermal conductivity and convective heat transfer implemented in the ANSYS R17.1 software complex. The fire test of hollow-core floor has been analysed and the use of a computa
APA, Harvard, Vancouver, ISO, and other styles
8

Zhou, Shiyu, Jiaqi Cao, Zhili Zhang, Haibo Wang, and Jiying Liu. "Thermal properties of radiant floor surface materials and numerical evaluation of the thermal performance." BioResources 18, no. 2 (2023): 3909–22. http://dx.doi.org/10.15376/biores.18.2.3909-3922.

Full text
Abstract:
A Hot Disk thermal constant analyzer was used to obtain the thermal parameters of composite boards, solid wood floor, and ceramic tiles (CT). FLUENT software was used for the model establishment and the temperature field simulation, and the effects caused by different surface materials were analyzed. A 2D unsteady model was constructed to analyze floor surface temperature and indoor temperature fields in an enclosure space. Comparison of temperature fields caused by different materials showed that both steady indoor temperature and surface temperature of CT were the highest, which is due to it
APA, Harvard, Vancouver, ISO, and other styles
9

Ivanov, Martin. "Instantaneous field measurements of thermal bridge parameters in ground floor residential room." E3S Web of Conferences 112 (2019): 01016. http://dx.doi.org/10.1051/e3sconf/201911201016.

Full text
Abstract:
The “thermal bridges” are defined as an isolated building’s areas, where the construction elements have higher thermal conductivity, compared with the rest of the building envelope. Thus, at cold winter conditions, a significant temperature difference may occur between neighbouring solid and air volumes within the construction. Moreover, it has been documented, that the heating energy demand of a building may be increased with more than 30%, due to the existence of thermal bridges and the increased heat losses from the indoors. Consequently, in the recent years, norms and standards have been d
APA, Harvard, Vancouver, ISO, and other styles
10

Werner-Juszczuk, Anna Justyna. "Analysis of the Use of Radiant Floor Heating as a Cooling System." Proceedings 16, no. 1 (2019): 23. http://dx.doi.org/10.3390/proceedings2019016023.

Full text
Abstract:
The aim of this paper was to analyze the operational parameters of a radiant floor heating system working as a cooling system, in order to determine the value of possible heat flux and the floor surface temperature that can be obtain on the floor surface. The influence of variable air and water temperatures, pipe spacing, and thermal resistance of floor covering on surface heat flux and temperature was analyzed. The admissible values of water temperature that assure thermal comfort according to standard ISO 11855 were determined for the analyzed variables.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Parameters of the thermal floor"

1

Лопатченко, Т. Ю. "Створення інформаційної системи підтримки проектування підлогового опалення". Thesis, Сумський державний університет, 2017. http://essuir.sumdu.edu.ua/handle/123456789/64758.

Full text
Abstract:
Мета роботи полягає у створені інформаційної системи (ІС) підтримки проектування систем підлогового опалення. ІС буде розроблена у вигляді веб-сайту, головним елементом якого буде калькулятор для обчислення необхідної теплової потужності та розрахунку параметрів теплової підлоги.
APA, Harvard, Vancouver, ISO, and other styles
2

Shao, Rui. "Effect of experimental parameters on simultaneous thermal analysis." Auburn, Ala., 2007. http://repo.lib.auburn.edu/2007%20Spring%20Theses/SHAO_RUI_44.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Bradley, Frederick Joseph. "Thermal shock resistance parameters for the industrial lining problem." Thesis, University of British Columbia, 1985. http://hdl.handle.net/2429/25568.

Full text
Abstract:
A two-dimensional constant heating rate thermoelastic model has been used to develop design and selection criteria for refractory components of linings of high-temperature furnaces and process vessels. The criteria are in the form of resistance to fracture initiation and resistance to damage parameters which account for the influence of thermal and mechanical properties, geometry, and temperature range, while distinguishing between the heating and cooling cases. The resistance to fracture initiation parameter ɸs is the maximum rate at which a shape can be heated or cooled through a specified t
APA, Harvard, Vancouver, ISO, and other styles
4

Mahoney, Clare M. "Elucidating the Parameters Governing Thermal Transport In Polymer Nanocomposites." Research Showcase @ CMU, 2015. http://repository.cmu.edu/dissertations/605.

Full text
Abstract:
Polymers are attractive candidates for the packaging industry given their ease of processing, abundance, and versatility. The poor thermal transport properties of these materials, however, limit their application in the packaging of high energy density materials. To circumvent this shortcoming, much work has gone into embedding thermally conductive additives into polymer matrices to enhance the overall thermal conductivity (k)). Predicting composite thermal conductivity (k) has shown to be difficult given the thermal boundary resistance (TBR) present at the particle matrix interface and the li
APA, Harvard, Vancouver, ISO, and other styles
5

Dolgusheva, E. B., and V. Yu Trubitsin. "Lattice Parameters and Thermal Expansion of Zirconium Thin Films." Thesis, Sumy State University, 2013. http://essuir.sumdu.edu.ua/handle/123456789/35222.

Full text
Abstract:
Using the molecular-dynamics method with many-body potential of interatomic interaction we have studied the polymorphism of zirconium thin films. The conditions for stability of metastable bcc(001) and fcc Zr films are determined at constant zero pressure. The dependences of the lattice parameters and thermal expansion coefficients on the temperature and thickness of bcc, fcc and hcp Zr films are calculated. The peculiarities of their variation near structural transformations are discussed. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/352
APA, Harvard, Vancouver, ISO, and other styles
6

Ertunc, Goker. "Development Of A Software For Determination Of Kinetic Parameters In Thermal Analysis." Master's thesis, METU, 2011. http://etd.lib.metu.edu.tr/upload/12613624/index.pdf.

Full text
Abstract:
In this thesis, a new software, THERA-Kinetics was developed for the evaluation of kinetic parameters using non-isothermal data. Different computational methods, available in the software, were applied to a set of experimental and simulated data distributed in the ICTAC (International Confederation for Thermal Analysis and Calorimetry) Kinetics Project. The reliability of the software was verified by comparing the kinetic results, which were in good agreement, with those obtained by the participants of the ICTAC Kinetics Project. It was also within the scope of this study to examine the combus
APA, Harvard, Vancouver, ISO, and other styles
7

Wullenkord, Michael [Verfasser]. "Determination of kinetic parameters of the thermal dissociation of methane / Michael Wullenkord." Aachen : Hochschulbibliothek der Rheinisch-Westfälischen Technischen Hochschule Aachen, 2012. http://d-nb.info/1020248289/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ishak, Mohd Taufiq. "Simulation study on influencing parameters of thermal ageing for transformer lifetime prediction." Thesis, University of Manchester, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.511935.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Urukalo, Djordje. "Thermal parameters identification and internal temperature bservation of DC actuators in robotics." Versailles-St Quentin en Yvelines, 2014. http://www.theses.fr/2014VERS0057.

Full text
Abstract:
L'un des objectifs de ce travail est de mettre en œuvre une prévention de la fatigue des moteurs électriques à l'intérieur d'un robot humanoïde. Notre objectif est de développer des modèles thermiques localisés simplifiés pour des actionneurs à courant continu avec un contrôle de bas niveau, qui puissent être utilisés pour protéger le moteur d’une surchauffe et la destruction des enroulements. Le travail de recherche mené dans cette thèse est principalement centré sur la détermination des paramètres du modèle thermique et de l'influence des dits paramètres sur un actionneur réel. Deux processu
APA, Harvard, Vancouver, ISO, and other styles
10

Irshad, Saba, and Purna Chandra Nepal. "Rise Over Thermal Estimation Algorithm Optimization and Implementation." Thesis, Blekinge Tekniska Högskola, Sektionen för ingenjörsvetenskap, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-4023.

Full text
Abstract:
The uplink load for the scheduling of Enhanced-Uplink (E-UL) channels determine the achievable data rate for Wideband Code Division Multiple Access (WCDMA) systems, therefore its accurate measurement carries a prime significance. The uplink load also known as Rise-over-Thermal (RoT), which is the quotient of the Received Total Wideband Power (RTWP) and the Thermal Noise Power floor. It is a major parameter which is calculated at each Transmission Time Interval (TTI) for maintaining cell coverage and stability. The RoT algorithm for evaluation of uplink load is considered as a complex and resou
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Parameters of the thermal floor"

1

Woodson, R. Dodge. Radiant floor heating. 2nd ed. McGraw-Hill, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Woodson, R. Dodge. Radiant floor heating. 2nd ed. McGraw-Hill, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kubičár, L̕udovít. Pulse method of measuring basic thermophysical parameters. Elsevier, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Nikitina, Lidii︠a︡ Mikhaĭlovna. Thermodynamic parameters and mass transfer coefficients of wet materials. Begell House, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Al-Muhana, Emad Ali Mohamed. Some thermal parameters affecting protected cropping under Eastern Province climatic conditions. Translation, Authorship & Publication Center, King Faisal University, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

P, Walker K., and United States. National Aeronautics and Space Administration., eds. Steady-state and transient zener parameters in viscoplasticity: Drag strength versus yield strength. National Aeronautics and Space Administration, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Freed, Alan David. Steady-state and transient zener parameters in viscoplasticity: Drag strength versus yield strength. National Aeronautics and Space Administration, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kudinov, Anatoliy, Svetlana Ziganshina, and Kirill Husainov. Calculation of thermal schemes of combined-cycle gas installations of thermal power plants. INFRA-M Academic Publishing LLC., 2023. http://dx.doi.org/10.12737/1865669.

Full text
Abstract:
The fundamentals of the theory of increasing the thermal efficiency of power plants through the use of gas turbine and combined-cycle technologies are presented. The classification is given, the basic and calculated thermal schemes, parameters and characteristics of gas turbine and combined-cycle gas installations of various types are given, the principles of their operation are described. The designs of combustion chambers and features of fuel combustion in the combustion chambers of gas turbine installations are given. Methods and examples of calculation of thermal schemes of gas turbine ins
APA, Harvard, Vancouver, ISO, and other styles
9

Miller, Robert A. Characterization and durability testing of plasma-sprayed zirconia-yttria and hafnia-yttria thermal barrier coatings. Part II. Effect of spray parameters on the performance of several hafnia-yttria and zirconia-yttria coatings. Lewis Research Center, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

United States. National Aeronautics and Space Administration., ed. Effects of the cooling system parameters on heat transfer and performance of the PAFC stack during transient operation. Cleveland State University, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Parameters of the thermal floor"

1

Charraou, Afaf, Safaa Oubenmoh, Amina Mourid, Rachid Saadani, Miloud Rahmoune, and Mustapha El Alami. "Analysis of Parameters Affecting the Thermal Performance of Floor Heating Systems: Case Study." In Engineering Materials. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-75032-8_21.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ariharan, S., Rubia Hassan, and Kantesh Balani. "Spraying Parameters." In Fundamentals of Thermal Spraying. CRC Press, 2022. http://dx.doi.org/10.1201/9781003321965-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wang, Zhaojun, Juan Hou, Chengzu Kang, and Haoran Ning. "Thermal Comfort with Floor Heating." In Lecture Notes in Electrical Engineering. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-39584-0_27.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Halligan, S., F. M. Kelvin, H. K. Pannu, et al. "Imaging Techniques (Technique and Normal Parameters)." In Imaging Pelvic Floor Disorders. Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/978-3-662-05206-8_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

García Gil, Alejandro, Eduardo Antonio Garrido Schneider, Miguel Mejías Moreno, and Juan Carlos Santamarta Cerezal. "Obtaining Terrain Thermal Parameters." In Springer Hydrogeology. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-92258-0_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Elsasser, Walter M. "Sea-Floor Spreading as Thermal Convection." In Collected Reprint Series. American Geophysical Union, 2014. http://dx.doi.org/10.1002/9781118782149.ch20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Côme, Guy-Marie. "Estimation of Kinetic Parameters." In Gas-Phase Thermal Reactions. Springer Netherlands, 2001. http://dx.doi.org/10.1007/978-94-015-9805-7_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Lim, Teik-Cheng. "Negative Thermal Expansion." In Mechanics of Metamaterials with Negative Parameters. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-6446-8_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Rössler, U. "ZnSe: lattice parameters, thermal expansion." In New Data and Updates for several Semiconductors with Chalcopyrite Structure, for several II-VI Compounds and diluted magnetic IV-VI Compounds. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-28531-8_99.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Pasquale, Vincenzo, Massimo Verdoya, and Paolo Chiozzi. "Heat Conduction and Thermal Parameters." In SpringerBriefs in Earth Sciences. Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-02511-7_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Parameters of the thermal floor"

1

Keiser, James R., Laura E. Meyers, Robert W. Swindeman, J. Peter Gorog, and Zia Abdullah. "Pattern of Thermal Fluctuations in a Recovery Boiler Floor." In CORROSION 1999. NACE International, 1999. https://doi.org/10.5006/c1999-99283.

Full text
Abstract:
Abstract The floor of a black liquor recovery boiler at a mill in central Canada has experienced cracking and delamination of the composite tubing near the spout wall and deformation of the floor panels that is most severe in the vicinity of the spout wall. One possible explanation for the observed damage is impacts of salt cake falling from the convective section onto the floor. In order to determine if such impacts do occur, strain gauges and thermocouples were installed on the boiler floor in areas where cracking and deformation were most frequent. The data obtained from these instruments i
APA, Harvard, Vancouver, ISO, and other styles
2

Zhuang, Furen, Partha Pratim Kundu, Ata Kircali Sezin, et al. "Efficient Thermal-Aware Floor-Planning with Bayesian Optimization: A Simulation-Efficient Approach." In 2024 IEEE 26th Electronics Packaging Technology Conference (EPTC). IEEE, 2024. https://doi.org/10.1109/eptc62800.2024.10909925.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Patmanathan, Ganesan, Chia Yee Ooi, Nordinah Ismail, and Siti Rahmah Aid. "Thermal-Aware Test Scheduling with Floor planning for Three-Dimensional Stacked Integrated Circuit." In 2024 IEEE International Conference on Semiconductor Electronics (ICSE). IEEE, 2024. http://dx.doi.org/10.1109/icse62991.2024.10681395.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Souza, Larissa Pereira de, Ana Paula Melo, and Roberto Lamberts. "Parameters that influence the thermal performance of commercial buildings: an exploratory analysis." In XVII ENCONTRO NACIONAL DE CONFORTO NO AMBIENTE CONSTRUÍDO. ANTAC, 2023. http://dx.doi.org/10.46421/encac.v17i1.3773.

Full text
Abstract:
This paper aims to understand the factors affecting the thermal performance of commercial buildings based on the Brazilian Inmetro Normative Instruction for Commercial Buildings Simplified Method. The study analyzed different thermal zone exposures and input parameters to assess their sensitivity in the output data. A reference office configuration was considered, and five zones were evaluated, including four perimetral zones and one internal zone. Also, two different cities with different climates were evaluated: Curitiba (Brazilian cold climate city) and São Luís (Brazilian hot climate city)
APA, Harvard, Vancouver, ISO, and other styles
5

Albero, Vicente, Ana Espinós, Enrique Serra, Manuel L. Romero, and Antonio Hospitaler. "Experimental study on the thermal behaviour of fire exposed slim-floor beams." In 12th international conference on ‘Advances in Steel-Concrete Composite Structures’ - ASCCS 2018. Universitat Politècnica València, 2018. http://dx.doi.org/10.4995/asccs2018.2018.8288.

Full text
Abstract:
Steel-concrete composite beams embedded in floors (slim-floors) offer various advantages such as the floor thickness reduction or the ease of installation of under-floor technical equipment. However, this typology presents important differences in terms of thermal behaviour, as compared to other composite beams, when exposed to elevated temperatures. These differences are due to their special configuration, being totally contained within the concrete floor depth. Moreover, the current European fire design code for composite steel-concrete structures (EN 1994-1-2) does not provide any simplifie
APA, Harvard, Vancouver, ISO, and other styles
6

Su, Chao, Lu Wang, and YiJia Dong. "Inverse Analysis on Thermal Parameters of Lock Head Floor Based on BP Neural Network." In Earth and Space 2014. American Society of Civil Engineers, 2015. http://dx.doi.org/10.1061/9780784479179.059.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Yadav, Vinod. "Determination of Thermal Parameters of a Work-Roll in Warm Rolling Using Inverse Modeling." In ASME 2018 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/imece2018-86106.

Full text
Abstract:
Thermal parameters of a work-roll play an important role in the modeling of the rolling process, due to periodic thermal loading. The knowledge of thermal parameters is also vital in understanding the fatigue life of the work-roll and the thermal crown. However, estimation of the thermal parameters viz., thermal conductivity, thermal diffusivity and convective heat transfer coefficients at both, inner and outer roll periphery is tough to realize during the rolling process. Various methods employed earlier for measuring the thermal properties of work-rolls in the rolling process requires intrus
APA, Harvard, Vancouver, ISO, and other styles
8

Dulikravich, George S., and Thomas J. Martin. "Optimization of 3D Branching Networks of Microchannels for Microelectronic Device Cooling." In 2010 14th International Heat Transfer Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/ihtc14-22719.

Full text
Abstract:
The aim of this work is to present a methodology to develop cost-effective thermal management solutions for microelectronic devices, capable of removing maximum amount of heat and delivering maximally uniform surface temperature distributions. The topological and geometrical characteristics of multiple-story three-dimensional branching networks of microchannels were developed using multi-objective optimization. The design variables which will be subject to optimization in this analysis are the geometric parameters of the microchannel network, i.e. the number of network floors in a 3D network,
APA, Harvard, Vancouver, ISO, and other styles
9

Mulay, Veerendra, Saket Karajgikar, Dereje Agonafer, Roger Schmidt, Madshusudan Iyengar, and Jay Nigen. "Computational Study of Hybrid Cooling Solution for Thermal Management of Data Centers." In ASME 2007 InterPACK Conference collocated with the ASME/JSME 2007 Thermal Engineering Heat Transfer Summer Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/ipack2007-33000.

Full text
Abstract:
The power trend for server systems continues to grow thereby making thermal management of data centers a very challenging task. Although various configurations exist, the raised floor plenum with Computer Room Air Conditioners (CRACs) providing cold air is a popular operating strategy. In prior work, numerous data center layouts employing raised floor plenum and the impact of design parameters such as plenum depth, ceiling height, cold isle location, tile openings and others on thermal performance of data center were presented. The air cooling of data center however, may not address the situat
APA, Harvard, Vancouver, ISO, and other styles
10

Breen, Thomas J., Ed J. Walsh, Jeff Punch, et al. "From Chip to Cooling Tower Data Center Modeling: Influence of Air-Stream Containment on Operating Efficiency." In ASME/JSME 2011 8th Thermal Engineering Joint Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/ajtec2011-44091.

Full text
Abstract:
In the drive to enhance data center energy efficiency, much attention has been placed on the prospect of airflow containment in hot-aisle cold-aisle raised floor arrangements. Such containment prevents airflow recirculation, eliminating the mixing effects of the hot and cold air streams that can cause an undesirable temperature rise at the inlet of the equipment racks. The intuitive assessment of the industry has been that the elimination of such mixing effects increases the energy efficiency of the data center cooling system by enabling delivery of air at higher inlet temperatures, thus reduc
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Parameters of the thermal floor"

1

Lee, K. H. NUFT USNT Thermal Input Parameters. Office of Scientific and Technical Information (OSTI), 2000. http://dx.doi.org/10.2172/802079.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Douglas C. Hittle. PHASE CHANGE MATERIALS IN FLOOR TILES FOR THERMAL ENERGY STORAGE. Office of Scientific and Technical Information (OSTI), 2002. http://dx.doi.org/10.2172/820428.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gorman, Thomas, Ronald Parker, and John Generosa. The Norse Manual. Volume 2A-10A - Local Thermal Equilibrium Molecular Band Shape Parameters. Defense Technical Information Center, 1988. http://dx.doi.org/10.21236/ada213561.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Banerjee, Dilip K., and John L. Gross. A Study of Thermal Behavior of a Composite Floor System in Standard Fire Resistance Tests. National Institute of Standards and Technology, 2012. http://dx.doi.org/10.6028/nist.tn.1771.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Isenberg, Douglas R., Brian M. Rookaird, Jacob Weisshaupt, Jessica Smith, and Brian Winterling. Identifying the Thermal Parameters and Controlling the Temperature of a High-Altitude Balloon Payload. Iowa State University. Library. Digital Press, 2012. http://dx.doi.org/10.31274/ahac.8314.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Derrien, H. Evaluation of Silicon Neutron Resonance Parameters in the Energy Range Thermal to 1800 keV. Office of Scientific and Technical Information (OSTI), 2002. http://dx.doi.org/10.2172/814166.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Velghe, Ineke, Bart Buffel, Veerle Vandeginste, Wim Thielemans, and Frederik Desplentere. Modelling hydrolytic, thermal, and mechanical degradation of PLA during single-screw extrusion. Universidad de los Andes, 2024. https://doi.org/10.51573/andes.pps39.ss.dbc.1.

Full text
Abstract:
Since melt processing causes degradation of poly(lactic acid) or PLA, it is crucial to understand the effect of extrusion conditions on the molecular weight reduction. Kinetic models found in literature are promising tools to describe hydrolytic, thermal, and mechanical degradation during extrusion. In order to use these models, extrusion parameters (that are equipment dependent) should be translated into the four fundamental parameters that determine degradation: moisture content in PLA, residence time, shear stress history and temperature history. This work presents a methodology to use nume
APA, Harvard, Vancouver, ISO, and other styles
8

Haines, Chris, Darold Martin, Deepak Kapoor, Joseph Paras, and Ryan Carpenter. Effect of Processing Parameters on the Physical, Thermal, and Combustion Properties of Plasma-Synthesized Aluminum Nanopowders. Defense Technical Information Center, 2011. http://dx.doi.org/10.21236/ada584507.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Gonczy, J., W. Boroski, and R. Niemann. Multilayer Insulation (Mli) in the Superconducting Super Collider: A Practical Engineering Approach to Physical Parameters Governing Mli Thermal Performance. Office of Scientific and Technical Information (OSTI), 1989. http://dx.doi.org/10.2172/1151491.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hogenes, Annemiek, Christiaan Overduin, Cornelis Slump, et al. The Influence of Irreversible Electroporation Parameters on the Size of the Ablation Zone and Thermal Effects: a Systematic Review. INPLASY - International Platform of Registered Systematic Review and Meta-analysis Protocols, 2022. http://dx.doi.org/10.37766/inplasy2022.3.0161.

Full text
Abstract:
Review question / Objective: The aim of this study was to review the effect of irreversible electroporation (IRE) parameter settings on the size of the ablation zone and occurrence of thermal effects. Information sources: A search was performed in PubMed (also including MEDLINE), Web of Science, Embase, Institute of Electrical and Electronics Engineers (IEEE) Xplore Digital Library and American Society of Mechanical Engineers (ASME) Digital Collection. Of all conference abstracts of which no full text article was present in the title and abstract search, a web-based search (Google Scholar, Res
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Parameters of the thermal floor' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography