Log in

Relevant bibliographies by topics / Pareto chart analysis / Journal articles

To see the other types of publications on this topic, follow the link: Pareto chart analysis.

Journal articles on the topic 'Pareto chart analysis'

Author: Grafiati

Published: 3 June 2025

Last updated: 1 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Pareto chart analysis.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Lenawati, Mei, Dimas Setiawan, and Whisnu Rindra Kurniawan. "Menentukan Prioritas Audit Sistem dan Teknologi Informasi Berdasarkan Root Cause Analysis Menggunakan Pareto Chart dan Fishbone." Fountain of Informatics Journal 8, no. 1 (2023): 15–20. http://dx.doi.org/10.21111/fij.v8i1.9440.

Full text

Abstract:

AbstrakEvaluasi merupakan salah satu rangkaian kegiatan dalam metodologi pengembangan sistem atau aplikasi yang seharusnya dilakukan setelah sistem atau aplikasi yang dibangun digunakan oleh pengguna, salah satu kegiatan yang dapat dilakukan untuk melakukan evaluasi terhadap sistem yaitu dengan melakukan kegiatan audit. Audit dilakukan tidak hanya untuk melakukan evaluasi apakah sistem tersebut sudah sesuai dengan prosedur dan mampu menjaga keamanan informasi, tetapi yang tidak kalah penting yaitu mengevaluasi dampak atau value apa saja yang didapat oleh organisasi dari penggunaan sistem terse

APA, Harvard, Vancouver, ISO, and other styles

2

Irfanto, Ryobi. "THE ANALYSIS CAUSE OF CASTING REPAIR WORK WITH PARETO CHART IN PROJECT X." Jurnal Teknik Sipil 18, no. 1 (2022): 106–17. http://dx.doi.org/10.28932/jts.v18i1.4485.

Full text

Abstract:

Construction projects are inseparable from their unique management. The unique management of construction projects makes it difficult to maintain their quality. One of the tools to measure quality in project management is the Pareto chart. Pareto chart is a statistical technique that is usually used for decision making based on the frequency of events compared to the causes of events. This research was conducted to analyze the causes of repair work on project X by using Pareto chart. The conceptual framework used in this study is based on two approaches, namely literature and field observation

APA, Harvard, Vancouver, ISO, and other styles

3

Tikhonova, I. V., Yu E. Titova, A. E. Gvozdev, and E. V. Ageev. "THE USE OF PARETO DIAGRAMS TO ANALYZE THE QUALITY OF TEACHING IN HIGHER EDUCATION." Proceedings of the Southwest State University 21, no. 5 (2017): 27–37. http://dx.doi.org/10.21869/2223-1560-2017-21-5-27-37.

Full text

Abstract:

Professionals in the field of analysis of quality systems is widely known for the Pareto principle and the corresponding graphs showing the contribution of private reasons in the overall picture of the functioning of the system. Pareto chart and the associated cumulative Lorenz curve are used to illustrate the dominant alternatives in terms of their total number. The reason for the popularity of Pareto charts lies in the objectively obvious visibility of the apparatus when nagoricino the analysis of functioning of complex systems. The aim of this work was to determine the possibility of using

APA, Harvard, Vancouver, ISO, and other styles

4

Salma, Jihan, and Resi Juariah Susanto. "The Quality Control Analysis Using Statistical Quality Control (SQC) Methods in Reducing Defective Muslim Clothing Products on CV. Mawaheejra." Banking and Management Review 12, no. 1 (2024): 18–28. http://dx.doi.org/10.52250/bmr.v12i1.732.

Full text

Abstract:

Introduction/Main Objectives: This study determines the quality control of CV. Mawaheejra, determine the factors causing product defects and the application of Statistical Quality Control (SQC) methods. Background Problems: CV. Mawaheejra has carried out control but the quality control is not optimal because of poor quality and errors often occur in the production process which causes product defects that not comply with the quality standards. Research Methods: This study uses a quantitative method. It carried data collection techniques through observation, interviews, documentation, and liter

APA, Harvard, Vancouver, ISO, and other styles

5

Ye, Wei Min, Wo Ye Liu, De Yong Zhao, Cui Juan Gao, Yong Fen Xie, and Chen Chen Yu. "Pareto Chart Based on Fuzzy-PPI and its Application in Analysis on Quality Data of Equipment Maintenance." Advanced Materials Research 1006-1007 (August 2014): 381–85. http://dx.doi.org/10.4028/www.scientific.net/amr.1006-1007.381.

Full text

Abstract:

To solve the drawbacks that the existing Pareto chart do not consider the fuzzy attribute of quality and imbalance of the improvement opportunities for quality defects, the nonconformity membership analysis method was introduced to lead a classification analysis on quality defects data, which increased the flexibility of data analysis, and Pareto priority index was introduced to assess improvement opportunities for quality defects, which increased the rationality during decision-making for quality defective items to improve. The two ways were both integrated to the analysis instance of equipme

APA, Harvard, Vancouver, ISO, and other styles

6

Fitriyanti, Dwi, Luh Putu Wrasiati, and Amna Hartiati. "Penerapan Metode Statistical Process Control (SPC) Pada Kemasan Produk Kopi Bubuk Di CV. Dewi Starindo." JURNAL REKAYASA DAN MANAJEMEN AGROINDUSTRI 12, no. 1 (2024): 78. http://dx.doi.org/10.24843/jrma.2024.v12.i01.p08.

Full text

Abstract:

Statistical Process Control (SPC) is a process used to monitor standards, make measurements, and take corrective action on products or services being produced. This research aims to determine the factors that cause damage to the packaging of ground coffee products at CV. Dewi Starindo and applying the SPC method to reduce the number of packaging rejects along with improvements. This research method uses Statistical Process Control (SPC) to determine whether the packaging quality is within control limits or not. Data analysis uses p control charts (p-chart), Pareto diagram, fishbone chart. The

APA, Harvard, Vancouver, ISO, and other styles

7

Chie, Ho Hwi, Januar Nasution, Ketut Gita Ayu, Nike Septivani, and Yualfin Renaldi. "Porcelain Product Quality Analysis in PT XYZ." ComTech: Computer, Mathematics and Engineering Applications 6, no. 4 (2015): 580. http://dx.doi.org/10.21512/comtech.v6i4.2195.

Full text

Abstract:

PT. XYZ is a company engaged in manufacturing porcelain dinner ware such as plates, cups, teapot, bowl, etc Porcelain product is safe for use and product defect will only affect the aesthetic not the functional side. The company always maintain the quality of the products produced as by maintaining a good product, in terms of visuals, will keep customers interested in the product. Good quality products characterized by quality A / B and C, and the product defect characterized by the quality of D, Lost, and BU. Concepts and methods used to analyze is a statistical process control (SPC) which in

APA, Harvard, Vancouver, ISO, and other styles

8

Wang, Xiao Qing, Bing Liu, and Yong Gui Liu. "Common Statistic Technology Applied to the Product Quality Control." Applied Mechanics and Materials 670-671 (October 2014): 1588–92. http://dx.doi.org/10.4028/www.scientific.net/amm.670-671.1588.

Full text

Abstract:

This paper studies the convenient application of statistical control methods in quality control, which includes selecting Pareto chart, line chart, process capability analysis, correlation and regression analysis, orthogonal test and the control chart. The purpose, range and operation steps of these methods are in practical use in the textile industry. Furthermore, this paper describes the application of control chart by using standard operation procedure.

APA, Harvard, Vancouver, ISO, and other styles

9

Phukan, Pallabi, and Utpal Barman. "Pareto Analysis of Factors Influencing Livelihood Choices of Smallholder Farmers in Climate-Vulnerable Assam State of India and Probable Solutions." Journal of Scientific Research and Reports 31, no. 4 (2025): 170–80. https://doi.org/10.9734/jsrr/2025/v31i42939.

Full text

Abstract:

Under climate change conditions smallholders’ farmers are compelled to change their livelihood strategy as existing are not suitable for new changing situations. So, alternative income sources and diversification of farm enterprises extensively help to get income. In this situation, it is important to know the personal-economic factors which influence small and marginal farmers in choosing the livelihood option for the future. The present study was conducted to identify major determinants influencing farmers’ livelihood options for the future in climate-vulnerable districts of Assam. Cross-sec

APA, Harvard, Vancouver, ISO, and other styles

10

Joseph Odunayo, Braimah, Edike Nnamdi, and Elakhe Sarah Oluwatosin. "Monitoring corona virus disease 2019 (COVID-19) pandemic outbreak in Africa." MOJ Applied Bionics and Biomechanics 4, no. 3 (2020): 67–71. http://dx.doi.org/10.15406/mojabb.2020.04.00137.

Full text

Abstract:

This study is a monitoring analysis of COVID-19 in Africa. The data used for the study is sourced from the Africa Centre for disease Control (Africa CDC) as t 10:00PM on the 24th of April, 2020 which comprises number of Africa countries with laboratory confirmed cases, number of death and number of discharged/recovered cases. The quality pandemic monitoring/control tools used in this study is fish-bone diagram, Pareto analysis, control chart, bar chart and pie chart. The fish bone diagram depicts the likely symptoms to check out for in a patent infected by COVID-19; the Pareto analysis shows t

APA, Harvard, Vancouver, ISO, and other styles

11

Balachandar, V., Rajalakshmi M. Dr., and Reena Mohan Dr. "Importance and Application of Quality Tools in Healthcare Facilities." International Journal of Current Science Research and Review 07, no. 10 (2024): 7867–77. https://doi.org/10.5281/zenodo.13954210.

Full text

Abstract:

Abstract : Wherever we go and whatever we buy we always look for quality. Every organization, company, industry, and institution is trying and struggling to give quality services and products, and to overcome the struggle, management experts have given many tools to improve quality for better outcomes. They are PDCA, 5 S, Histogram, flow chart, run chart, control chart, Brainstorming, Why-Why analysis, Pareto chart, Check sheet, Gantt chart, Scatter chart, Fishbone chart, Mistake proofing, and Six Sigma. This review aims to explain the importance and application of these Quality tools in healt

APA, Harvard, Vancouver, ISO, and other styles

12

Auliya, Fitrotul, and Fachrur Rozi. "Penerapan Grafik Pengendali DOB (Decision On Belief) Untuk Pengendalian Kualitas Produksi Air Mineral Dalam Kemasan (AMDK)." Jurnal Riset Mahasiswa Matematika 4, no. 2 (2025): 52–59. https://doi.org/10.18860/jrmm.v4i2.31142.

Full text

Abstract:

Efforts to maintain or control the quality of a process are the goals of quality control. One of the tools used is the control chart. A control chart is a graph that shows whether a process is in a controlled state or not. Decision On Belief (DOB) is a new method used to detect defects in a product. The DOB control chart has been proven to be more sensitive in detecting out-of-control data compared to other charts. Data will be analyzed using bar charts, Pareto diagrams, and cause-and-effect diagrams, followed by a distribution test, which shows that the data follows a Poisson distribution. Th

APA, Harvard, Vancouver, ISO, and other styles

13

Singh, Amit, Mamata Jenamani, and Jitesh Thakkar. "Do online consumer reviews help to evaluate the performance of automobile manufacturers?" Journal of Enterprise Information Management 33, no. 5 (2020): 1153–98. http://dx.doi.org/10.1108/jeim-09-2019-0292.

Full text

Abstract:

PurposeThis research proposes a text analytics–based framework that examines the utility of online customer reviews in evaluating automobile manufacturers and discovering their consumer-perceived weaknesses.Design/methodology/approachThe proposed framework integrates aspect-level sentiment analysis with the house of quality (HoQ), TOPSIS, Pareto chart and fishbone diagram. While sentiment analysis mines and quantifies review-embedded consumer opinions on various automobile attributes, the integrated HoQ-TOPSIS analyzes the quantified opinions and evaluates the manufacturers. The Pareto charts

APA, Harvard, Vancouver, ISO, and other styles

14

Ahmad Julianda, Tasya Aspiranti, and Umari Abdurrahim Abi Anwar. "Analisis Pengendalian Kualitas Produk dengan Menggunakan Metode Statistical Quality Control untuk Meminimumkan Jumlah Produk Cacat." Bandung Conference Series: Business and Management 4, no. 1 (2024): 677–82. http://dx.doi.org/10.29313/bcsbm.v4i1.11682.

Full text

Abstract:

Abstract. Elzone Sportindo is a clothing industry engaged in convection. Its production activities in Elzone Sportindo have been supervised but are still supervised by the owner himself, so it is still not effective and there are still products that are sold in a condition that is still not good for sale on the market. The purpose of this study is to find out how quality control is carried out by the Elzone Sportindo Convection Company, as well as its analysis using the method statistical quality control (SQC). The research method used is descriptive quantitative with data collection technique

APA, Harvard, Vancouver, ISO, and other styles

15

Miskiyah, Aliffatul, and Farida Pulansari. "Analisis Pengendalian Kualitas Produk Ayam Utuh pada PT XYZ dengan Metode Statistical Quality Control (SQC)." JURMATIS (Jurnal Manajemen Teknologi dan Teknik Industri) 7, no. 1 (2025): 59–74. https://doi.org/10.30737/jurmatis.v7i1.6441.

Full text

Abstract:

PT. XYZ is a producer of slaughtered chicken and has a chicken slaughterhouse with the largest production capacity in Indonesia. PT XYZ has various types of products, the most in demand is whole chicken, but in the production process, whole chicken products have a greater number of defects than other products. The solution of the problem can be done using the Statistical Quality Control (SQC) method. This study aims to identify and analyze the quality of whole chicken products in PT XYZ using the Statistical Quality Control (SQC) method, determine the factors that cause non-conformities in who

APA, Harvard, Vancouver, ISO, and other styles

16

莫, 梦湉. "Cause Analysis of Large-Scale Recreational Facilities Accidents Based on Pareto Chart." Journal of Security and Safety Technology 06, no. 01 (2018): 7–12. http://dx.doi.org/10.12677/jsst.2018.61002.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Kukreti, Ankur, Ram Singh, and Rohit Bansal. "Happy Voyage: Application of Total Quality Management-TQM in Indian Tourism Industry with specific reference to Uttarakhand." International Journal of Advances in Management and Economics 9, no. 4 (2020): 11–16. http://dx.doi.org/10.31270/ijame/v09/i04/2020/2.

Full text

Abstract:

In this paper author has tried to find out the factors hampering the development of Tourism sector in India. Author has used the extensive literature survey in order to find out the factors affecting tourism sector. For the smooth development of the tourism sector these factors need to be sorted out but in real life all of the factors can’t be sorted as it requires huge investment and would lead to mismanagement of funds. So bringing this thing into concern creator has utilized a conventional procedure where numerous approaches are vieing for consideration for example Pareto Analysis. Pareto A

APA, Harvard, Vancouver, ISO, and other styles

18

Naufal Wildan Rahmadian, Tasya Aspiranti, and Rabiatul Adwiyah. "Analisis Pengendalian Kualitas Produk Alas Kaki Menggunakan Metode Statistical Quality Control (SQC)." Bandung Conference Series: Business and Management 4, no. 1 (2024): 709–18. http://dx.doi.org/10.29313/bcsbm.v4i1.11794.

Full text

Abstract:

Abstract. PT Kreasi Gudang Biru is one of industry engaged in the manufacturing and making footwear. In the footwear production process there is still no governance in the quality control process, therefore there are still defective products. The purpose of this study is to find out how quality control is carried out at PT Kreasi Gudang Biru and its analysis uses statistical quality control or SQC methods. The method used in this study is descriptive quantitative with data collection techniques, namely by means of observation, interviews, and documentation. The data analysis step uses statisti

APA, Harvard, Vancouver, ISO, and other styles

19

Haievskyi, Volodymyr. "STUDY OF POSSIBILITIES OF JOINT APPLICATION OF PARETO ANALYSIS AND RISK ANALYSIS DURING CORRECTIVE ACTIONS." Technology transfer: fundamental principles and innovative technical solutions 4 (November 30, 2020): 22–24. http://dx.doi.org/10.21303/2585-6847.2020.001536.

Full text

Abstract:

Continuous improvement in the quality management system is based on corrective action. Corrective actions require the identification of priority defects that require priority elimination of the causes of occurrence. The traditional method of prioritization can be considered a Pareto chart, built by the number of identified inconsistencies. This technique makes it possible to prioritize the most frequently detected defects. However, defects that are rare can significantly outweigh those that are often encountered in their consequences. The defect risk is a complex indicator that simultaneously

APA, Harvard, Vancouver, ISO, and other styles

20

Sonalia, Devi, and Musa Hubeis. "Pengendalian Mutu Pada Proses Produksi Di Tiga Usaha Kecil Menengah Tahu Kabupaten Bogor." Jurnal Manajemen dan Organisasi 4, no. 2 (2016): 112. http://dx.doi.org/10.29244/jmo.v4i2.12618.

Full text

Abstract:

<p><em>Today the growth of Small and Medium Enterprises (SMEs) is increasing significantly along with the rise in competitiveness in this field. Accordingly entrepreneurs who want to get into the competition and do not want to be left behind by other SMEs in the business field have to pay attention to the quality of their product. The purpose of this study are: (1) to analyze the quality control (QC) on the production process in SMEs of Tofu (soybean cake) as Tahu Bambu, Tahu Bandung Ashor and Tahu Bandung; (2) to identify the factors which cause damage of Tofu as Tahu Bambu, Tahu

APA, Harvard, Vancouver, ISO, and other styles

21

Agustin, Annisa, and Anton Mulyono Azis. "ANALISIS PENGENDALIAN KUALITAS PRODUK MIE DENGAN METODE STATISTICAL PROCESS CONTROL." ANALISIS 14, no. 01 (2024): 16–32. http://dx.doi.org/10.37478/als.v14i01.3203.

Full text

Abstract:

CV Manunggal Jaya is a company engaged in food production in Bandung. The company, which produces noodles experiences product defects that exceed the company's tolerance limit. The purpose of this study is to determine quality control, factors that cause product defects, and the application of the Statistical Process Control (SPC) method. This research method is a descriptive quantitative method with data collection using interviews, observation and documentation. Data processing is done using tools such as flowchart, fishbone diagram, check sheet, histogram, control chart (p-chart) and pareto

APA, Harvard, Vancouver, ISO, and other styles

22

Hussain, Sheeba, and Dahshilla Junejo. "Boarding Issues facing by Girls during their Academic Career: A Pareto Analysis." Sukkur IBA Journal of Educational Sciences and Technologies 4, no. 1 (2024): 57–67. http://dx.doi.org/10.30537/sjest.v4i1.1331.

Full text

Abstract:

It commonly believes that boarding system is decorum where students get bundle of knowledge and experience. It is the precious time of life when the students live without their families with an anonymous one and gain experience about struggle for survival ship. During the boarding life students face lot of hurdles and problems. Boarding life taught how to face the challenges and pursue their career smoothly. Boarding system is the combination of values and culture. This study aims to explore the major problems or hindrance faces by the boarder girls during their academic career. Through litera

APA, Harvard, Vancouver, ISO, and other styles

23

Farchan, Fauzi, Tiara Fitri Rizkiya, Fitria Damayanti, and Azzatillah. "Analysis Of Quality Control Of Raw Crackers Using Statistical Quality Control (Sqc) Method To Control Defective Products In Coconut Shrimp Crackers At Kelapa Gading Indramayu." ORGANIZE: Journal of Economics, Management and Finance 4, no. 1 (2025): 33–54. https://doi.org/10.58355/organize.v4i1.151.

Full text

Abstract:

Prawn Crackers Kelapa Gading Indramayu Indramayu is a company engaged in the food sector, especially the production of raw crackers. In the production process, there are still defective products, so the company needs quality control to reduce the failure rate. This study aims to assess whether the quality control implemented by Prawn Crackers Kelapa Gading Indramayu has been running optimally. The method used in this study is Statistical Quality Control (SQC), namely Control Chart, Fishbone diagram, and Pareto diagram to determine the level of factors causing damage, as well as to determine th

APA, Harvard, Vancouver, ISO, and other styles

24

Nadiyah, Khairun, and Grita Supriyanto Dewi. "Quality Control Analysis Using Flowchart, Check Sheet, P-Chart, Pareto Diagram and Fishbone Diagram." OPSI 15, no. 2 (2022): 183. http://dx.doi.org/10.31315/opsi.v15i2.7445.

Full text

Abstract:

SP Aluminum is engaged in the manufacturing industry by producing cooking utensils. In its application, SP Aluminum has tried to produce quality products to satisfy consumers. However, there are still defects that appear in its products. Another problem is the product defects have not been handled seriously by the company. Based on these problems, this study utilizes 5 quality control methods from seven tools: flowchart, check sheets, p-chart, Pareto diagram, and fishbone diagrams. This research is a quantitative qualitative with direct data collection through observation and interviews. The d

APA, Harvard, Vancouver, ISO, and other styles

25

Lubis, Mery Christyn, Ferdyanto Abangan Simanjuntak, and Sandi Dwi Payana. "Analisis Menggunakan Peta Kendali I-MR dan Diagram Pareto pada Produksi Kayu Lapis di PT. SLJ Global Tbk, Samarinda." AKSIOMA : Jurnal Sains Ekonomi dan Edukasi 2, no. 6 (2025): 1221–36. https://doi.org/10.62335/aksioma.v2i6.1340.

Full text

Abstract:

This study aims to evaluate the quality of plywood production at PT. SLJ Global Tbk using the Statistical Quality Control (SQC) approach, specifically through the application of the I-MR control chart. The data used were collected from the production output during September 2021. The analysis was conducted using both the Individuals Chart (I-Chart) and the Moving Range Chart (MR-Chart), complemented by a Pareto analysis to identify the most dominant types of defects. The results indicate that the overall production process is within statistical control limits; however, there is a violation of

APA, Harvard, Vancouver, ISO, and other styles

26

Lemler, Kaci J., and William H. Semke. "The Reduction of Modal Sensor Channels through a Pareto Chart Methodology." Journal of Sensors 2015 (2015): 1–10. http://dx.doi.org/10.1155/2015/869258.

Full text

Abstract:

Presented herein is a new experimental sensor placement procedure developed to assist in placing sensors in key locations in an efficient method to reduce the number of channels for a full modal analysis. It is a fast, noncontact method that uses a laser vibrometer to gather a candidate set of sensor locations. These locations are then evaluated using a Pareto chart to obtain a reduced set of sensor locations that still captures the motion of the structure. The Pareto chart is employed to identify the points on a structure that have the largest reaction to an input excitation and thus reduce t

APA, Harvard, Vancouver, ISO, and other styles

27

Jabeen, Riffat, Mashhood Ahmad, Azam Zaka, M. Nagy, and Hazem Al-Mofleh. "Unique exploration method of electronic component failure time and yield strengths of circular tubes under complete flexible model." PLOS ONE 19, no. 10 (2024): e0310150. http://dx.doi.org/10.1371/journal.pone.0310150.

Full text

Abstract:

The aim of this study is to develop new exponential weighted moving average control charts based on a flexible model. These control charts created through least square and weighted least square estimators of the shape parameter of the new Kumaraswamy Pareto distribution. Exponential weighted moving average control charts based on least square and weighted least square estimators are compared for checking the performance of control charts. The results were not only explored through numerical values but also explored through half a dozen plots. The numerical results and plots exposed that the ex

APA, Harvard, Vancouver, ISO, and other styles

28

Aziz, Muchammad Rif'an, Moh Jufriyanto, and Hidayat Hidayat. "Analysis Quality Control In Rice Packing Projects To Reduce Defects Using Methods Statistical Quality Control (SQC)." Jurnal Sains dan Teknologi Industri 20, no. 2 (2023): 800. http://dx.doi.org/10.24014/sitekin.v20i2.22147.

Full text

Abstract:

The industry is growing rapidly, indirectly forcing business actors to pay attention to the quality of the goods they produce during the production process. Companies must maintain the quality of their products because quality affects how satisfied customers are with a product. PT. XYZ is a company engaged in steel construction and fabrication. The problems that often occur are defects such as Overlap welding defects, Porosity welding defects, and unavoidable Cutting process defects. This study aims to determine the level of damage, identify the factors that cause damage and recommend correcti

APA, Harvard, Vancouver, ISO, and other styles

29

Afifah Devi Lestari and Erni Widajanti. "Pengendalian Kualitas Produk dengan Metode Statistical Quality Control untuk Mengurangi Produk Rusak pada UMKM Gethuk Anyar di Ngawi." Jurnal Rimba : Riset Ilmu manajemen Bisnis dan Akuntansi 2, no. 3 (2024): 328–55. http://dx.doi.org/10.61132/rimba.v2i3.1164.

Full text

Abstract:

MSMEs Gethuk Anyar is an industry operating in the culinary sector, the problem faced is the company's difficulty in maintaining the quality of the gethuk products it produces. This research aims to find out how quality control is implemented using statistical tools in an effort to control the quality and level of product damage at Gethuk Anyar MSMEs in Ngawi. Quality control analysis uses tools in the form of check sheets, cause and effect diagrams, Pareto diagrams and control charts. The results of the control chart analysis show that production is in an uncontrolled state. This can be seen

APA, Harvard, Vancouver, ISO, and other styles

30

Biały, Witold, and Juraj Ružbarský. "Breakdown Cause and Effect Analysis. Case Study." Management Systems in Production Engineering 26, no. 2 (2018): 83–87. http://dx.doi.org/10.1515/mspe-2018-0013.

Full text

Abstract:

Abstract Every company must ensure that the production process proceeds without interferences. Within this article, the author uses the term “interferences” in reference to unplanned stoppages caused by breakdowns. Unfortunately, usually due to machine operators’ mistakes, machines break, which causes stoppages thus generating additional costs for the company. This article shows a cause and effect analysis of a breakdown in a production process. The FMEA as well as quality management tools: the Ishikawa diagram and Pareto chart were used for the analysis. Correction measures were presented whi

APA, Harvard, Vancouver, ISO, and other styles

31

Stepanov, A. M., and N. V. Khashimova. "USE OF STATISTICAL QUALITY CONTROL METHODS IN MANUFACTURING BRIDGE METAL STRUCTURES." Kontrol'. Diagnostika, no. 253 (July 2019): 30–37. http://dx.doi.org/10.14489/td.2019.07.pp.030-037.

Full text

Abstract:

This article describes the use of statistical methods of quality control and management in the manufacturing metal bridge structures, such as: – cause and effect diagram (Ishikawa diagram). Causal factors affecting the quality of welded joints were established; – checklist. The form of the control sheet for registration of types of surface defects of butt welded joints were developed; – pareto Chart. The most common types of surface defects of butt welded joints were identified; the types of surface defects of butt welded joints, leading to the greatest losses were determined. ABC method – ana

APA, Harvard, Vancouver, ISO, and other styles

32

Padhil, Ahmad, and Nurhayati Rauf. "PERANCANGAN INSTRUKSI KERJA DOKUMEN DAN VISUAL PADA MESIN ELECTRICAL DISCHARGE MACHINE." Journal of Industrial Engineering Management 5, no. 2 (2020): 80–89. http://dx.doi.org/10.33536/jiem.v5i2.121.

Full text

Abstract:

Quality is a factor that can increase product competitiveness. In improving products quality is necessary to control the quality (Quality Control) of the process activities. This study aims to determine the quality control of granulated sugar packaging process by using the seven tool method consisting of check sheet, histogram, Pareto chart, flow chart, scatter diagram, control chart and fishbone diagram. From 30 days observation concluded that the highest type of damage consist of metal detection by 145 bags and torn packaging by 50 bags. Then, from the results of control chart known that out

APA, Harvard, Vancouver, ISO, and other styles

33

Sridhar, Jayaprakash, Dhanapal Jegatheeswaran, and Ravindran Gobinath. "A DOE (Response Surface Methodology) Approach to Predict the Strength Properties of Concrete Incorporated with Jute and Bamboo Fibres and Silica Fumes." Advances in Civil Engineering 2022 (September 17, 2022): 1–13. http://dx.doi.org/10.1155/2022/1150837.

Full text

Abstract:

Design of Experiment approach is adopted for deriving progression variables comprising jute fibres, bamboo fibres, and silica fumes. To obtain the optimal combination of progression variables, the effect of progression variable on the strength properties of concrete, Box–Behnken design of Response Surface Methodology was adopted. Totally four responses like compressive strength and split tensile strength at 14 days and 28 days were considered. Regression models for responses were tested using Analysis of Variance (ANOVA) and Pareto chart. The statistical importance of each progression variable

APA, Harvard, Vancouver, ISO, and other styles

34

Nsiah, Richmond, James Ankamah, Theresah Krah, et al. "Leveraging Pareto Analysis of Outpatient Morbidity for Strategic Drug Procurement and Health Promotion in Resource-Constrained Setting in Ghana." American Journal of Health Research 12, no. 6 (2024): 154–64. http://dx.doi.org/10.11648/j.ajhr.20241206.11.

Full text

Abstract:

Background: Effective health management in resource-limited settings requires strategic resource allocation and intervention planning. Pareto analysis, based on the 80/20 rule, aids in identifying key health conditions impacting outpatient morbidity, guiding intervention prioritization and resource optimization. This study applied Pareto analysis on outpatient morbidity data from Goaso Government Hospital, Ghana, to identify common health conditions and improve drug procurement and health promotion strategies. The methodology also serves as a guide for applying Pareto chart analysis to enhance

APA, Harvard, Vancouver, ISO, and other styles

35

Rachmasari Pramita Wardhani, Lukman, Selvia Sarungu, and Siti Norhidayah. "Teknik Pengendalian Mutu Dengan Menggunakan Metode Diagram Pareto Dalam mencapai Customer Satisfaction." JURNAL TEKNOSAINS KODEPENA 4, no. 2 (2024): 12–17. http://dx.doi.org/10.54423/jtk.v4i2.58.

Full text

Abstract:

Graphic analysis tools and methods are very useful tools that can help quality managers shed light on developing problems and one that has an important role in control engineering methods is the Pareto Diagram, a simple chart that can provide actionable insight into how prioritize quality management resources that are maintained or improved. In the world of service-based work, this Pareto diagram is used to determine the level of importance that must be prioritized for improvements. The object of writing this scientific work is to examine how customer service from a company operating in the se

APA, Harvard, Vancouver, ISO, and other styles

36

Memon, Mohammad Salih, Abdul Sattar Shah, Imdad Ali Khowaja, and Muhammad Munir Ahmadani. "Statistical Correlation on Internal Issues of Garment Textile industry in Pakistan." INTERNATIONAL JOURNAL OF MANAGEMENT & INFORMATION TECHNOLOGY 10, no. 6 (2015): 2268–74. http://dx.doi.org/10.24297/ijmit.v10i6.2119.

Full text

Abstract:

This research investigates the Statistical Correlation on Internal Issues of Spinning Textile industry in Pakistan.Â Data were collected from various primary as well as secondary sources. It was revealed that Â after performing Pareto analysis the output shows total counts equivalent to 1853. As it is suggested to take about 80% to solve the overall issues but here the 80% is between 7th and 8th issue. Therefore it is decided to take about 75% through which 7 issues may be selected as shown in the Pareto chart 6-8. However 8 issues are equal to 1482 which is about 84%.Â Government of Pakistan

APA, Harvard, Vancouver, ISO, and other styles

37

Kuzlyakina, Yulya A., Zoya A. Yurchak, Elizaveta A. Kryuchenko, and Oksana A. Kuznetsova. "RISK ANALYSIS AND IDENTIFICATION OF CRITICAL CONTROL POINTS (CCP) IN PRODUCTION OF NATURAL INTESTINAL CASINGS." Theory and practice of meat processing 4, no. 2 (2019): 4–13. http://dx.doi.org/10.21323/2414-438x-2018-4-2-4-13.

Full text

Abstract:

Implementation of the HACCP system in enterprises manufacturing natural intestinal casings is topical for ensuring high quality and confidence in safety of manufactured products. The paper examines hazardous factors in production of natural intestinal casings, analyzes risks with assessment of the probability of hazardous factor occurrence. To this end, a Pareto chart was constructed, unacceptable risks were determined, CCPs were revealed using the decision tree, critical control limits were established for each CCP and the requirements for their monitoring were specified. In addition, the pap

APA, Harvard, Vancouver, ISO, and other styles

38

Akimkina, E. E. "Model of operational control of the project for the integration of information management systems." Informacionno-technologicheskij vestnik 13, no. 3 (2017): 85–93. http://dx.doi.org/10.21499/2409-1650-2017-3-85-93.

Full text

Abstract:

An analysis model has been developed that includes the main components of the Gantt chart and Pareto diagrams and the sensitivity analysis of the project. An example of the application of this model for the integration of the 1C: Enterprise system as a data source into a decision support system is given. When analyzing the sensitivity of the project, the task is to select and quickly calculate the time and sequence of actions that affect the final result. A sensitivity chart of the project is proposed, which is based on calculating the percentage of deviation of the indicator from the planned

APA, Harvard, Vancouver, ISO, and other styles

39

Memon, Muhammad Salih, Abdul Sattar Shah, Dr Anwar Ali Shah G.Syed, Dr Muhammad MunirAhmadani, and Faiz Muhammad Shaikh. "Correlation between the Issues of Processing Textile Sector in Pakistan." INTERNATIONAL JOURNAL OF MANAGEMENT & INFORMATION TECHNOLOGY 11, no. 1 (2016): 2615–19. http://dx.doi.org/10.24297/ijmit.v11i1.4938.

Full text

Abstract:

This research investigates the Statistical Correlation on Internal Issues of Processing textile sector in PakistanData were collected from Primary as well as secondary sources It is a statistical research technique in decision making that is used for the selection of a limited number of tasks that produce significant overall effect. It separates the few major problems from the many possible problems. It is named after Vilfredo Pareto, a 19th-century Italian economist. It was revealed Initially as the issues of Processing Sector were about 5, after performing Pareto analysis the output shows to

APA, Harvard, Vancouver, ISO, and other styles

40

Rand, Omri, and Vladimir Khromov. "Compound Helicopter: Insight and Optimization." Journal of the American Helicopter Society 60, no. 1 (2015): 1–12. http://dx.doi.org/10.4050/jahs.60.012001.

Full text

Abstract:

The paper presents an insight into the complex task of design and optimizing a compound helicopter configuration. It introduces the “drag versus power chart” (DP chart) as a tool for separating the rotors, thrusters, wings, and fuselage contributions and understanding their optimal combination in a generic compound configuration. The analysis shows the dependency of the optimal configuration on the efficiencies of the rotors, the thrusters, and the wings, and a way to carefully examine the effect of many design parameters. As such, the analysis may be applied to various configurations includin

APA, Harvard, Vancouver, ISO, and other styles

41

González Álvarez, Roxana, Aníbal Barrera García, Ana Beatriz Guerra Morffi, and Juan Felipe Medina Mendieta. "Stability assessment and process capability analysis in a food pasta company." 26, No1 - 2021, no. 26, No 1 - 2021 (November 22, 2021): 231–51. http://dx.doi.org/10.36995/j.visiondefuturo.2021.26.01.006.en.

Full text

Abstract:

Statistical quality control is a set of tools and techniques that allows to verify, monitor and control the variability of processes to improve product quality and business competitiveness. The objective of this study was to evaluate the pasta production process of a company that belongs to the food industry sector in terms of stability and compliance of quality specifications. The Six Sigma improvement methodology was used, which focuses on identifying and eliminating the causes of variation in the processes. Data collection was accomplished by the use of different techniques, such as: interv

APA, Harvard, Vancouver, ISO, and other styles

42

Akra, Ukeme P., Anthony A. Isaac, Edet E. Bassey, Andrew C. Etim, Usenobong B. Akpan, and Itoro T. Michael. "A 2^k Factorial Design on The Effect of Different Cholesterol ‎Reducing Factors." International Journal of Advanced Statistics and Probability 12, no. 2 (2025): 1–8. https://doi.org/10.14419/rd686p43.

Full text

Abstract:

This research focuses on the application of a 2K factorial design on the effect of different cholesterol-reducing factors. The purpose is to determine the effect of each factor and its interactions that ‎contribute to the reduction of cholesterol levels. A complete 24 factorial design with two replicates ‎was used for the experiment, where the factors are: Frequency (A), Duration (B), Dosage (C) and ‎Drug type (D) each at two levels. The levels are A (Once and Twice daily), B (4 and 8 weeks), C ‎‎(Low and High), and D (Statins and PCKS9 inhibitor). The analysis of variance technique was used ‎

APA, Harvard, Vancouver, ISO, and other styles

43

LUPO, TONI. "ECONOMIC-STATISTICAL DESIGN APPROACH FOR A VSSI X-BAR CHART CONSIDERING TAGUCHI LOSS FUNCTION AND RANDOM PROCESS SHIFTS." International Journal of Reliability, Quality and Safety Engineering 21, no. 02 (2014): 1450006. http://dx.doi.org/10.1142/s0218539314500065.

Full text

Abstract:

Economic design approaches of control charts are commonly based on the assumption that various cost parameters values and the occurrence risk of assignable causes have to be a priori known with precision. However, in real operative contexts, such parameters can be really difficult to accurately estimate, especially considering costs arising from out-of-control conditions of the process. As consequence, pure economic design approaches can involve chart schemes with low statistical performance. To overcome such limitation, it is herein proposed a multi-objective economic-statistical design appro

APA, Harvard, Vancouver, ISO, and other styles

44

Kardas, Edyta. "The analysis of non-conformances as the way of assessment of quality of aluminium finishing strips in the selected company." MATEC Web of Conferences 183 (2018): 03005. http://dx.doi.org/10.1051/matecconf/201818303005.

Full text

Abstract:

The main purpose of the paper is the analysis of nonconformances of aluminium finishing strips in one of Polish companies. This kind of analysis may be one of the ways to assess the quality of products. In the first part of the paper qualitative analysis of nonconformances of strips was made using the Pareto chart, where 6 types of non-conformances were taken into account. In the second part of the paper the causes and effects of non-conformances of strips were assessed using FMEA method. This method showed that the biggest problem concerned the anodised coating of strips. In the last part of

APA, Harvard, Vancouver, ISO, and other styles

45

M. Afandi and Ida Ayu Nuh Kartini. "Analisis Penerapan Statistical Quality Control (SQC) dalam Mengurangi Produk Cacat pada Bingkai Pigura di Bmrsign Wallgallery Lamongan." RISOMA : Jurnal Riset Sosial Humaniora dan Pendidikan 2, no. 5 (2024): 240–54. https://doi.org/10.62383/risoma.v2i5.363.

Full text

Abstract:

The problem faced by the Bmrsign Wallgallery company is that products are found that do not match the specifications set by the company. The types of product damage are wrong size frames, broken frames, and uneven corners. To solve this problem, the SQC method is used to reduce the causes of defects in the product. The purpose of this method is to reduce the risk of damage to the product. The object studied was Bmrsign Wallgallery with a sample of 29 days. The use of the SQC method is accompanied by analysis tools in the form of control charts (p-charts), Pareto diagrams, cause and effect diag

APA, Harvard, Vancouver, ISO, and other styles

46

Michelena, Nestor F., and Alice M. Agogino. "Multiobjective Hydraulic Cylinder Design." Journal of Mechanisms, Transmissions, and Automation in Design 110, no. 1 (1988): 81–87. http://dx.doi.org/10.1115/1.3258910.

Full text

Abstract:

Monotonicity analysis is used to solve a three-objective optimization problem in which a hydraulic cylinder is to be designed. With the additional application of the Karush-Kuhn-Tucker optimality conditions a reduced symbolic design chart is obtained which is then utilized to obtain parametric numerical results. Two- and three-dimensional parametric Pareto-optimal plots are obtained for the three conflicting objectives: (1) cross-sectional area, (2) circumferential stress ratio and (3) pressure ratio. The analysis and design procedure strengthens and extends the results suggested by previous w

APA, Harvard, Vancouver, ISO, and other styles

47

Zh Shkaruba, N., O. A. Leonov, and D. A. Bogolubova. "Quality indicators influencing the choice of potato harvester." IOP Conference Series: Earth and Environmental Science 981, no. 4 (2022): 042040. http://dx.doi.org/10.1088/1755-1315/981/4/042040.

Full text

Abstract:

Abstract The article presents the results of studies related to the development of a methodology that allows you to determine the quality indicators that affect the choice of an agricultural producer when buying potato harvesters. As a result of approbation of the developed methodology, data have collected and a Pareto Chart of quality indicators affecting the choice of potato harvesters had constructed. ABC-analysis made it possible to identify three groups of the most important quality indicators of potato harvesters for the consumer.

APA, Harvard, Vancouver, ISO, and other styles

48

Ubaidillah, Ubaidillah, and Istantyo Yuwono. "Analysis of Quality Defects in Plastic Seed Products Using Statistical Process Control (SPC) Method." Jurnal Teknik Industri Terintegrasi 6, no. 3 (2023): 533–44. http://dx.doi.org/10.31004/jutin.v6i3.15812.

Full text

Abstract:

Plastic seed products are products made from recycled plastic materials such as raw materials for plastic bags and some screen printing plastics. UD. ABC is a company that produces PP (Polypropylene) plastic pellets. The existing problems include the discovery of instability in the production of plastic pellets which is in a negative direction for the company, namely there are product defects in plastic pellet products that exceed the standard defect tolerance limit of the company by 2%. Based on the Pareto diagram, it can show that the type of protrusion defect is 69.56% more dominant than th

APA, Harvard, Vancouver, ISO, and other styles

49

Nagi, Ayman, and Safwan Altarazi. "Integration of value stream map and strategic layout planning into DMAIC approach to improve carpeting process." Journal of Industrial Engineering and Management 10, no. 1 (2017): 74. http://dx.doi.org/10.3926/jiem.2040.

Full text

Abstract:

Purpose: This paper presents an implementation of the Six Sigma DMAIC approach implementing lean tools and facilities layout techniques to reduce the occurrence of different types of nonconformities in the carpeting process. Such carpeting process can be found in several industries such as construction, aviation, and automotive.Design/methodology/approach: The improvement process was built through a sequential implementation of appropriate interconnected tools at each phase of the DMAIC approach. Utilized tools included: Pareto analysis, control charts, Ishikawa chart, 5-whys, failure mode and

APA, Harvard, Vancouver, ISO, and other styles

50

Kurniawan, Wildan Rifqi, Galih Anindita, and Mey Rohma Dhani. "Analisis Kecelakaan Pekerjaan Lifting dengan Overhead Crane Menggunakan Metode ECFA, Fishbone, dan Pareto Analysis." Journal of Safety, Health, and Environmental Engineering 1, no. 1 (2024): 1–6. http://dx.doi.org/10.33863/jshee.v1i1.22.

Full text

Abstract:

Sektor fabrikasi baja merupakan perusahaan yang memiliki tingkat risiko yang dapat menyebabkan terjadinya kecelakaan. Berdasarkan data kecelakaan perusahaan diketahui terdapat kecelakaan lifting dengan overheadcrane memiliki angka kecelakaan tertinggi dalam 3 tahun terakhir. Oleh sebab itu, perlu dilakukan analisis kecelakaan pada pekerjaan lifting guna meminimalisir terjadinya kecelakaan serupa di kemudian hari. Penelitian ini dilakukan dengan metode Event and Causal Factor Analysis untuk menentukan faktor-faktor dengan mengidentifikasi peristiwa terjadinya suatu kecelakaan. Setelah dilakukan

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!