Log in

Relevant bibliographies by topics / Parní kondenzační turbína

Contents

Dissertations / Theses

Academic literature on the topic 'Parní kondenzační turbína'

Author: Grafiati

Published: 4 June 2021

Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Parní kondenzační turbína.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Dissertations / Theses on the topic "Parní kondenzační turbína"

1

Šrůtek, Petr. "Kondenzační parní turbína." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254283.

Full text

Abstract:

The theme of master's thesis is the design of condensing steam turbine with three unregulated steam outputs. The steam parameters in individual outputs are dealt with in heat balance circulation. This chapter is followed by thermodynamic and strength calculations, including the calculation of the turbine gland steam and design of drainage. Structural design of the turbine is also included in this thesis.

APA, Harvard, Vancouver, ISO, and other styles

2

Šikula, František. "Kondenzační parní turbína." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254377.

Full text

Abstract:

The topic of this thesis is a project of condensing steam turbine, which uses as an energy source heat waste from high output combustion engines. In the first part of the thesis, there is a general overview of different types of combustion engines and their thermodynamic cycles. There are also explained important features, which are essential for running of combustion engines. In the second part, there is a theoretical explanation of steam turbine. The main part of the thesis is a project of condensing steam turbine with an integrated gearbox. At first there are chosen basic conceptions, which influence the project; then there is calculated an algorithm for thermodynamic calculation for each turbine module. At the end, there is conducted a simplified calculation of a gearbox and there is also a calculation of payback period of the designed steam turbine. There are made drawings, which are all base on the previous calculations. There are drawings of sectional views of each unit and there is also a drawing of construction arrangement of steam turbine with a generator.

APA, Harvard, Vancouver, ISO, and other styles

3

Štěpánová, Lenka. "Parní kondenzační turbína." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-316410.

Full text

Abstract:

The aim of this Master’s thesis is to design a steam condensing turbine with three bleeds. First, a heat balance of the steam cycle is calculated, followed by thermodynamic and stress calculation of the turbine blading and design of a gland steam system and drain system. A price proposal is suggested for the given steam turbine. In the end, a design drawing of the steam turbine is constructed.

APA, Harvard, Vancouver, ISO, and other styles

4

Martynek, Filip. "Kondenzační parní turbína." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318687.

Full text

Abstract:

Content of this thesis is design of one-housing condensing steam turbine with two uncontrolled extractions. First part is describing design of balance scheme. Including cycle joints calculation, design of equipment for whole steam and condense cycle. Thesis continues with preliminary and detail design of regulativ stage. Main goal of this part is thermodynamic calculation of flow channel. Second part is describing lubricating oil and cooling system. Contains process description of lubricating oil scheme including calculation, specification of components and pipe branches design. Diploma thesis is finished with detail lubricating oil scheme.

APA, Harvard, Vancouver, ISO, and other styles

5

Trávníček, Zdeněk. "Kondenzační parní turbína." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318857.

Full text

Abstract:

The aim of the master’s thesis is to design a condensing steam turbine based on given inputs. Firstly, a design and computation of heat balance is made, followed by thermodynamic calculation of steam turbine channel and a design of compensatory piston of axial forces. Last part of the thesis consists of a review of a change of cooling water temperature in condensator on last turbine stages. The structural drawing of longitudinal section of turbine is included as well.

APA, Harvard, Vancouver, ISO, and other styles

6

Vymětalík, Zbyněk. "Kondenzační parní turbína." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378716.

Full text

Abstract:

The topic of this diploma thesis is a condensing steam turbine with one regulated steam extraction. The first part contents design and balance of heat scheme. The heat scheme is the basis for the main part of this work, which is the thermodynamic design of the turbine with reaction blades. At the end, the characteristics of the turbine are created. Drawing of the turbine section is attached to this thesis.

APA, Harvard, Vancouver, ISO, and other styles

7

Prinz, František. "Kondenzační parní turbína." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-400480.

Full text

Abstract:

The main topic of this master thesis is the design of condensing steam turbine. In the beginning the heat scheme with low pressure regeneration is calculated. There are chosen 2 low pressure heat exchangers and 3 steam outlets from the turbine. In the main part the thermodynamic proposal with reaction blades is designed, which consists of the regulating stage and the stage part of turbine. The survivability of the turbine is checked by the calculation of mechanical strength. In the end the turbine is checked at reduced mass flow and the turbine characteristic is plotted. The designed steam turbined has a regulating stage and 34 stages in the stage part, has a power of 45873 kW with thermodynamic efficiency of 83.6%. The reheat factor is 1.052.

APA, Harvard, Vancouver, ISO, and other styles

8

Borýsek, Václav. "Kondenzační parní turbína." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417732.

Full text

Abstract:

This diploma thesis deals with the design of a steam condensing turbine for intake steam of pressure 125 bar, temperature 540 °C and maximal intake of steam into the turbine 130 t/h. A thermal scheme is designed, including low-pressure and high-pressure regeneration, an air condenser, a feed tank and a boiler. Afterwards a thermodynamic design of a condensing turbine is made with an A-wheel type regulating stage and a stage part with reaction blades. The design of the blades is strength-tested. Then is made the design of the compensating piston and the sealing system. In the end the characteristics of the turbine for non-design steam flows is plotted. The designed turbine has a power of 34644 kW, has a thermodynamic efficiency of 85.1% and a reheat factor of 1.046.

APA, Harvard, Vancouver, ISO, and other styles

9

Siuda, Radim. "Kondenzační parní turbina." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231428.

Full text

Abstract:

This master’s thesis deals with design of a high speed steam turbine with detachable condensation module and integrated gearbox. As a source of energy is used heat waste, which is a result of the diesel engines function. Important options concerning conception of the turbo set are discussed in the master’s thesis. Subsequently, thermodynamic calculations for each module are done. Part of the thesis is also simplified calculation of the integral gearbox. Construction drawings of all modules and of the complete turbo set with electrical generator were created based on thermodynamic calculation.

APA, Harvard, Vancouver, ISO, and other styles

10

Řezníček, Ondřej. "Kondenzační parní turbina." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230760.

Full text

Abstract:

The theme of this thesis is design of single body condensing steam turbine of 50 MW to saturated steam for new nuclear power plant generation. In the thesis is made design and calculation of balancing scheme. On the basis of the calculation is made blades part of turbine. Furthermore, the thesis solves basic strength and structural calculations. The result is drawing of longitudinal cut of the turbine.

APA, Harvard, Vancouver, ISO, and other styles

More sources

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!