Relevant bibliographies by topics / Parný kotol

Contents

  1. Journal articles
  2. Dissertations / Theses

Academic literature on the topic 'Parný kotol'

Author: Grafiati
Published: 4 June 2021
Last updated: 12 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Parný kotol.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Parný kotol"

1

Ravico, Ravico. "MENELUSURI TRADISI LISAN PARNO (PANGKU PARBAYO) ADAT DESA KOTO MAJIDIN, KABUPATEN KERINCI SEBAGAI WUJUD IDENTITAS MASYARAKAT." TAMADDUN: Jurnal Kebudayaan dan Sastra Islam 19, no. 1 (June 28, 2019): 1–15. http://dx.doi.org/10.19109/tamaddun.v19i1.3395.

Full text
Abstract:
Introduction: This article discusses the oral tradition of the people of Koto Majidin village, namely parno adat Data Cellection Method: The stages in oral tradition research include literature studies and observation. Analysis Data: To trace the traditional parno tradition of Koto Majidin Village, qualitative research was used with a descriptive method, namely trying to describe and explain traditional customs so that they could know the substance of the parno. Furthermore, this study uses a cultural theme analysis. Results and Dicussions: Oral tradition is a tradition that has been passed down from one generation to the next. With the progress of the development of human life and the development of science, the oral tradition has been eliminated from people's lives. In the lives of urban people, this oral tradition has begun to disappear. But the existence of this oral tradition can still be found in rural areas. One of them is in Koto Majidin Village, Kab. Kerinci, namely the parno adat oral tradition. Parno adat whose existence still exists in traditional community celebrations, if not reviewed. So it is feared that there will be extinction. Conclusion: This analysis is used to conduct culture-oriented research by looking for red threads that are related associated with values, ethos, and culture. The results of this study, if viewed from the values contained in the customary community of Koto Majidin Village are religious, agrarian and humanist societies. Furthermore, the values of the traditional parno wisdom of Koto Majidin Village relate to ideological values and advice.
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Parný kotol"

1

Daubner, Tomáš. "Návrh parního kotle na spalování zemního plynu, parametry páry 170 t/h, 6,7 MPa, 485°C." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231668.

Full text
Abstract:
The topic of master thesis is the thermal calculation and proportion design of gas-fired steam boiler. The first part describe technical characteristics and parameters of the boiler. The main part of this thesis is the thermal calculation of the boiler.
APA, Harvard, Vancouver, ISO, and other styles
2

Soľár, Slavomír. "Roštový parní kotel s přirozenou cirkulací na spalování slámy z pšenice,žita a ječmene." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232154.

Full text
Abstract:
The main aim of this diploma thesis is to proceed a design of grate steam boiler for grain straw combustion with 15,6 MJ/kg of fuel efficiency. Steam power of boiler is 15 t/h, pressure of overheated steam is 5 MPa, temperature of overheated steam is 415 °C and temperature of inlet water is 125 °C. The estimation is based on proportioning of draughts and segments of boiler and on thermal computation. Verification of divergence of thermal balance is going to constate accuracy of boiler design.
APA, Harvard, Vancouver, ISO, and other styles
3

Pavlo, Matej. "Kotel na spalování hnědého uhlí." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241847.

Full text
Abstract:
The aim of the master’s thesis is thermal calculation and dimensional design of boiler of 235 t/h which burns brown coal. The work is divided into several parts. In the first part, stoichiometric calculation and the calculations enthalpy of flue gases and air are performed. After calculating the heat balance and loss of the boiler, the boiler efficiency is counted. In the next part, thermal calculation of combustion chamber is calculated. Subsequently, design of the individual heating surfaces is proposed. Finally, the overall heat balance of the boiler is inspected. The calculation is supplemented by drawing of the boiler.
APA, Harvard, Vancouver, ISO, and other styles
4

Skoupý, Jan. "Parní kotel." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-401491.

Full text
Abstract:
This thesis is focused on the design of steam boiler like a supplement for cogeneration unit of biogas plant. The main idea is to use a waste heat from the exhaust gasses to produce a technological steam of required parameters. The thesis contains of a calculation an amount of the heat in exhaust gasses and a heat exchange surface. An Aerodynamic loss and a wall thickness of the boilers are verified by strength calculation in the next parts of this thesis. At the end of this thesis are made projection drawings and diagram, which are made of the calculations.
APA, Harvard, Vancouver, ISO, and other styles
5

Suchánková, Lenka. "Parní kotel na biomasu menších výkonů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443182.

Full text
Abstract:
The master's thesis describes the design of the steam boiler, which burns biomass with heat output of 6 MW. The required parameters of the steam are a temperature of 300 °C and a pressure of 2,5 MPa. The thesis is gradually devoted to stoichiometric calculations through heat losses and boiler efficiency, to the design of the combustion chambre, heat exchangers and pressure losses. Part of the thesis is drawing documentation of the boiler.
APA, Harvard, Vancouver, ISO, and other styles
6

Mazal, Lubomir. "Parní kotel na spalování kontaminovaného dřeva." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229323.

Full text
Abstract:
The threat of depletion of fossil fuels is the driving force to diversify energy sources in the Czech Republic respectively in the European Union but also worldwide. One of these potential sources are being biomass boilers. The construction of these boilers has expanded in recent years because of government support for the construction of clean energy sources. Whether it is a burning of clean biomass or just incorporation of biomass to fossil fuels, teh substitution of fossil fuels and biomass boilers are the ideal solution. Their major advantages include significant reductions in emissions, mainly sulfur compounds, organic closure of the cycle of CO2 and disposal costs of spent residue.
APA, Harvard, Vancouver, ISO, and other styles
7

Vitula, Michal. "parní kotel na dřevo výkonu 50t/h." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230144.

Full text
Abstract:
Steam boiler for wood burning 50t/h In this diploma thesis I will deal design of the steam grate boiler 50t/h of burning clean wood. For the specified parameters make a stoichiometric calculations and calculate the enthalpy of the air and combustion. I shall calculate the heat balance, losses of boiler and thermal efficiency of the boiler. The following section make a design of the combustion chamber and its thermal calculation. After determining the dimensions of the combustion chamber further continue by calculating boiler moves and heating surfaces. Finally check the overall heat balance.
APA, Harvard, Vancouver, ISO, and other styles
8

Mach, Ondřej. "Parní kotel na spalování dřeva 40t/h." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230308.

Full text
Abstract:
The purpose of this Diploma Thesis is the construction design of the steam-boiler for the combustion of biomass – wood pellets. For the specified parameters have been defined stoichiometric calculations and calculations enthalpy burnt gas. In sequence, there is designed and solved the configuraion of the steam-boiler, so that the result design and the number of the heat-delivery surfaces can be determined, in dependence on the required inlet parametres of the air and outlet parametresof the water vapour. These parametres mean the amount, the temparature and the pressure. The aim of the thesis is to make a design of the steam.boiler burning biomass according to the set parametres. This very ecological fuel can really substitute the fossil fuel and friendly respect the environment.
APA, Harvard, Vancouver, ISO, and other styles
9

Lučko, Martin. "Parní kotel na dřevní štěpku 88t/h." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230312.

Full text
Abstract:
The aim of the work is to design a plain wood combustion boiler of 88 t/h output. Fuelling component analysis has been added to the basic boiler parameters. For given fuel is prepared stechiometric calculations. After making the heat balance of boiler is determined the thermal efficiency. For given output of steam parametrs (temparature, pressure, volume) are designed individual convective surfaces and dimensons of the boiler. It is also made drawings.
APA, Harvard, Vancouver, ISO, and other styles
10

Křivánek, Robin. "Navrhněte parní kotel na spalování zemního plynu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231250.

Full text
Abstract:
This diploma thesis describes the design of steam boiler for combustion natural gas, which has a steam power 80t/hour. In the first phase is performed calculation of stoichiometric amount of combustion air and flue gas. After that follows constructional proposal of the combustion chamber. Furthermore continue by calculation heating surfaces of the boiler. In conclusion, the thesis is focused on designing the injections. To check the accuracy of the results is recalculated heat balance the whole boiler.
APA, Harvard, Vancouver, ISO, and other styles
More sources
You might also be interested in the extended bibliographies on the topic 'Parný kotol' for particular source types:
Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography