Relevant bibliographies by topics / Parný roštový kotol

Contents

  1. Dissertations / Theses

Academic literature on the topic 'Parný roštový kotol'

Author: Grafiati
Published: 4 June 2021
Last updated: 17 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Parný roštový kotol.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Dissertations / Theses on the topic "Parný roštový kotol"

1

Soľár, Slavomír. "Roštový parní kotel s přirozenou cirkulací na spalování slámy z pšenice,žita a ječmene." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232154.

Full text
Abstract:
The main aim of this diploma thesis is to proceed a design of grate steam boiler for grain straw combustion with 15,6 MJ/kg of fuel efficiency. Steam power of boiler is 15 t/h, pressure of overheated steam is 5 MPa, temperature of overheated steam is 415 °C and temperature of inlet water is 125 °C. The estimation is based on proportioning of draughts and segments of boiler and on thermal computation. Verification of divergence of thermal balance is going to constate accuracy of boiler design.
APA, Harvard, Vancouver, ISO, and other styles
2

Jakeš, Pavel. "Roštový kotel na spalování dřeva." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-228960.

Full text
Abstract:
This diploma thesis deals with proposal of the steam boiler on combustion uncontaminated wood. For the specified parameters have been implemented stoichiometric calculations and calculations enthalpy burnt gas. In the next part have been dealt with heat balance of the boiler, the efficiency of the boiler, design of the combustion chamber and calculation of particular rating surfaces. The output parametres are temperature, pressure and the amount of steam.
APA, Harvard, Vancouver, ISO, and other styles
3

Kopeček, Marián. "Roštový kotel na spalování biomasy." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241224.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Szabó, Gergely. "Roštový kotel na spalování biomasy." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254294.

Full text
Abstract:
The thesis deals with the design of a grate steam boiler which has natural circulation and is determined for combustion of wood chips. The boiler has a capacity of 45 t/h and produces superheated steam with the output parameters of 3,5 MPa and 450 °C at the 125 °C feed water temperature. Stoichiometric calculations and the flue gases enthalpy calculations are based on the composition of the specified fuel. The efficiency and fuel consumption of the boiler is also determined. The thesis mainly focuses on the thermal calculation and geometric design of the individual heat transfer surfaces of the boiler. The drawing documentation of the steam boiler is available in the attachment of the thesis.
APA, Harvard, Vancouver, ISO, and other styles
5

Kozák, Tomáš. "Roštový kotel s přirozenou cirkulací na spalování dřevní štěpky." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232155.

Full text
Abstract:
The thesis is dedicated to the design of the steam boiler which burns wood chips, with a natural circulation of the water. It is a grate boiler, which produces 20 t/h of the steam. The output parameters of the steam are 420 °C and 5 MPa. The feedwater temperature is 125 ° C .The thesis gradually deals with stoichiometric calculations and determines the efficiency of the boiler. Then it describes the design of the fireplace and thermal calculations of each heat transfer surfaces. The appendix includes drawings of the boiler.
APA, Harvard, Vancouver, ISO, and other styles
6

Suchánková, Lenka. "Parní kotel na biomasu menších výkonů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443182.

Full text
Abstract:
The master's thesis describes the design of the steam boiler, which burns biomass with heat output of 6 MW. The required parameters of the steam are a temperature of 300 °C and a pressure of 2,5 MPa. The thesis is gradually devoted to stoichiometric calculations through heat losses and boiler efficiency, to the design of the combustion chambre, heat exchangers and pressure losses. Part of the thesis is drawing documentation of the boiler.
APA, Harvard, Vancouver, ISO, and other styles
7

Dvořák, Aleš. "Navrhněte roštový parní kotel na spalování dřeva a hnědého uhlí(poměr mísení 30/70-dřevo)." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231252.

Full text
Abstract:
This diploma work attends to presentation of steam grid boiler for wood and brown coal burning in scale (30/70-wood) in load 60t/h, with parametres of outgoing vapour p=7MPa, t=490°C. The work is splitted to several chapters. At the beginning I’m going to make stechiometric calculation and entalpic calculations of air and compustion gas. After that I’m going to calculate heat balance, losses of boiler and set heat efficiency of boiler. Then I’m going to suggest combustion chamber of boiler and make heat calculation. After suggestion of combustion chamber I’m going to set proportions of pulls and heat-delivery surface. In last chapter I’m giong to check heat balance. Inclosure of my work contains drawing documentation of steam boiler.
APA, Harvard, Vancouver, ISO, and other styles
8

Lauš, Ladislav. "Roštový kotel s přirozenou cirkulací na spalování směsi dřeva a hnědého uhlí." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232156.

Full text
Abstract:
The work deals with the constructional and calculation design of the boiler for burning wood and combustion coal in scale (30/70-coal), in load 50 t/h, parameters of steam output p=7,5 MPa, t=480 °C and a temperature of feed water 105 °C. It is a boiler with natural water circulation by evaporation surfaces. In proposal first steichiometric calculations and enthalpic calculations of air and flue gas are performed. Then it is calculated heat balance, the boiler losses and the thermal efficiency is determined. After designing the combustion chamber and dimensions of pulls are determined. In last chapter the overall energy balance are checked. Drawing documentation of steam boiler is a part of the work.
APA, Harvard, Vancouver, ISO, and other styles
9

Malíková, Veronika. "Roštový kotel na spalování dřevní štěpky a tříděného odpadu 50t/h." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417551.

Full text
Abstract:
The diploma thesis deals with the design of a grate boiler for the combustion of a mixture of RDF and wood chips with the specified output and parameters of superheated steam. The introduction consists of stoichiometric calculations and determination of the thermal efficiency of the boiler. The thesis is devoted to determining the dimensions of the boiler, heat transfer calculations, determining pressure losses, checking the heat balance and chlorine corrosion.
APA, Harvard, Vancouver, ISO, and other styles
10

Hlaváč, David. "Roštový kotel na spalování biomasy o parametrech páry 88 t / h, 9,6 MPa, 520°C." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232165.

Full text
Abstract:
The thesis deals with steam boiler design of 88 tons per hour capacity and with the outlet steam parameters of 9,6 MPa and 520 °C. Fuel for boiler is wood chips. The main focus of the thesis is on heat calculation, design of dimensions and layout of heat surfaces. The thesis also include drawing of steam boiler.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography