To see the other types of publications on this topic, follow the link: PC-Card.

Dissertations / Theses on the topic 'PC-Card'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 19 dissertations / theses for your research on the topic 'PC-Card.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Vadakke, Kunninmel Gokuldev. "Chemically Programmed Memory Card and PC Connected Memory Card Reader." Thesis, Mittuniversitetet, Avdelningen för elektronikkonstruktion, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-18577.

Full text
Abstract:
Inkjet-printed memory cards have been developed previously by re-searchers at Mid Sweden University but, these did possess some limita-tions, as each resistive memory cell required one physical contact and the resistances were designed to be electrically programmed.This work overcomes the above limitations by developing chemically programmed printed memory cards and a PC connected memory card reader. Printed memory cards are inexpensive and are developed by inkjet printing the nano-silver ink onto the photo paper substrate. A matrix readout method is used to increase the num-ber of memory cells and, by using a chemical solvent, the resistances were programmed to the desired resistance values and, for which, each resistance value represents data on the cards, called, write once read many (WORM) memories. The memory card reader was developed to access the data (resistance value) of the memory card and also to trans-mit the data to a LabVIEW graphical user interface for displaying the resistance values. By using multiple resistance steps, in which each step represents a different state, it is possible to create a number of possible selectable combinations which can be programmed at a later stage for developing applications.
APA, Harvard, Vancouver, ISO, and other styles
2

Chen, Chiung-Hsing. "A prom burner module extension card for an IBM PC." Ohio University / OhioLINK, 1989. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1182285469.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Said, Karim A. "PicoRF: A PC-based SDR Platform using a High Performance PCIe Plug-in Card Extension." Thesis, Virginia Tech, 2012. http://hdl.handle.net/10919/34443.

Full text
Abstract:
Wireless communication serves as the foundation for a wide range of services that have become an integral part of human life in this day and age. Driven by the desire to have a single piece of hardware that can provide multiple wireless services, attention has been directed to SDRs due to their programmable nature and the flexibility they can offer in operating over multiple standards. In addition, they can provide effective solutions to current challenges in wireless communication, such as spectrum overcrowding and inter-standard operability, as well as future challenges to come due to their upgradeability.

Although SDRs have been around in the research community for over a decade, they have not reached the point of transitioning to the mass consumer market, size being one of the major obsta-cles. Numerous SDR hardware platforms have been developed demonstrating successful function-ality, yet to this day most of them remain trapped in desktop/benchtop form factors which are not suited for mobility. A main factor contributing to the size of SDR units is the RF front end. Using current technology, wide-band operation of SDR RF front-ends is achieved by aggregating mul-tiple dedicated components, each covering a portion of the frequency range. Recent technology advances have enabled the integration of wide frequency functionality inside a single integrated package. One example is a prototype RFIC transceiver chip from Motorola Research Labs which contains a complete direct conversion RF transceiver in a single chip, with a frequency coverage range of 100MHz-2.4GHz. RFIC5, the latest version of the chip, has additionally integrated high speed ADC and DAC units, leading to a significant reduction in the component count and the overall size of the SDR hardware.

This thesis describes the implementation of a highly compact, SDR PC plug-in card, known as PicoRF. PicoRF is based on the Motorolaâ s RFIC chip for the RF front-end functionality, while the combined computational power of a V5 FPGA and a PC host is used for waveform signal processing. An overlay gird consisting of an interconnection of PR slots is reserved on the FPGA to host the components of a signal processing pipeline which can be modified during run-time. Through a high speed PCIe connection, partial bitstreams can be downloaded from the host PC to the FPGA at a very high speed making it possible for the radio to modify its function in very short time intervals and greatly reducing the service interruption time. Control software running on the PC host manages the overall system operation including the RFIC which is controlled through a custom developed API. The combination of the laptop host and the plug-in card form a small form factor, mobile SDR node that is one step towards satisfying both the performance and ergonomics demand of the consumer market.
Master of Science

APA, Harvard, Vancouver, ISO, and other styles
4

Cirineo, Tony. "FLIGHT LINE TEST SET, IRIG TONE GENERATOR AND FLIGHT TERMINATION TRANSMITTER ON A PC CARD." International Foundation for Telemetering, 1997. http://hdl.handle.net/10150/609682.

Full text
Abstract:
International Telemetering Conference Proceedings / October 27-30, 1997 / Riviera Hotel and Convention Center, Las Vegas, Nevada
This paper describes the development of a PC based IRIG tone generator and flight termination transmitter. The tone generator and flight termination transmitter card are part of a flight line test set. The test set has several PC based cards which include an S-Band telemetry receiver, a bit synchronizer, a decommutator, an encryption support card and the flight termination transmitter card. The test set can perform a complete end to end test of a weapon’s flight termination system prior to loading on an aircraft.
APA, Harvard, Vancouver, ISO, and other styles
5

Erdinc, Emre. "Soft Afdx (avionics Full Duplex Switched Ethernet) End System Implementation With Standard Pc And Ethernet Card." Master's thesis, METU, 2010. http://etd.lib.metu.edu.tr/upload/12611929/index.pdf.

Full text
Abstract:
ARINC 664/AFDX (Avionics Full Duplex Switched Ethernet) protocol is a leading onboard communication technology in civil aviation. As AFDX is a new technology, unit cost of the hardware devices are high and protocol is open to changes. This thesis discusses the design of an AFDX End System application for test environment with a software based solution with cheap COTS (Commercial offthe shelf) equipment, explains the implementation of the software and analysis the performance.
APA, Harvard, Vancouver, ISO, and other styles
6

Rodriguez, Villarroel Arnold Luis. "Diseño y desarrollo de una interfaz de comunicación entre smart card y pc para identificación sanitaria." Bachelor's thesis, Pontificia Universidad Católica del Perú, 2014. http://tesis.pucp.edu.pe/repositorio/handle/123456789/5372.

Full text
Abstract:
En la actualidad, en el Perú, las instituciones de salud almacenan las historias clínicas en grandes y desorganizados archivos cuyo acceso no es fácil ni oportuno. Asimismo, toda la información queda disponible sólo para el personal asistencial de dicho establecimiento de salud, sin poder ser compartida con otras entidades prestadoras de este servicio. En este contexto existe la necesidad de contar con un dispositivo físico portable que almacene la información básica sobre la historia clínica de un paciente. Las smart cards, para el área de salud, almacenan estos datos y evitan los problemas actuales, como el desvío de medicamentos, la demora de la admisión en las instituciones de salud; además, de estar disponible en situaciones de emergencia en donde es de vital importancia conocer datos como grupo sanguíneo, alergias u otro dato relevante. El presente trabajo tiene como objetivo el diseño y desarrollo de una interfaz de comunicación entre smart card y PC para identificación sanitaria. Para ello, se desarrolló el hardware y software necesario que permitió leer y escribir los datos clínicos en la tarjeta inteligente. El hardware desarrollado permite la comunicación con la smart card; además, de la comunicación con la PC. El software desarrollado, para la interfaz gráfica de usuario, además de permitir la gestión de los datos almacenados en la smart card, se comunica con una plataforma de base de datos la cual almacena las tablas de consulta que se basan en estándares internacionales de interoperabilidad semántica, los datos del paciente como soporte de información y usuarios del sistema como personal de admisión, especialistas en salud y administradores del sistema. Según las pruebas realizadas, se logró almacenar y leer los datos clínicos en la smart card, la gestión de los mismos desde la interfaz gráfica de usuario, el funcionamiento adecuado de las herramientas del sistema para los diferentes tipos de usuarios y, finalmente, la comunicación con la base de datos almacenada en un servidor.
Tesis
APA, Harvard, Vancouver, ISO, and other styles
7

Jafari, Harandi Arash. "Design of a Compact Flash Module." Thesis, Linköping University, Department of Science and Technology, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-346.

Full text
Abstract:

The combination of the existing mobile system and the IEEE standard for WLAN makes way for development of the 4th generation mobile systems. Access for laptop-users to WLAN is today a reality giving a taste of that new generation. Designing a product that introduces WLAN networking for handheld computers would be a major step in the development spoken of. Accommodating existing WLAN PC Card for laptops to handheld PDAs gives a short time to market. Therefore a product prototype for a compact flash module was designed and manufactured to make way for the 4th generation indoor networking facilities on the market.

APA, Harvard, Vancouver, ISO, and other styles
8

Eriksson, Bo. "Design of a 32-bit CardBus PC-Card based System Test Platform for the SoCTRix Wireless LAN Transceiver." Thesis, Linköping University, Department of Electrical Engineering, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-2656.

Full text
Abstract:

Today, wireless communications is used more then ever before. Wired systems are replaced with wireless versions. New methods and transmission standards are developed and tested. The purpose of this thesis is development of a flexible high-performance System Test Platformfor test of the SoCTRix Wireless LAN Transceiver.

The result is a Xilinx Virtex-II FPGA based System Test Platform board with CardBus PC Card interface to a computer. The hardware achieved has the following features:

- 8-layer PCB

- PCMCIA CardBus PC Card interface, enabling 133 MB/s data throughput

- 1M Gate Virtex-II FPGA with reprogrammable configuration memory

- Debugging via LEDs and Logic Analyzer connectors

- 2x SPI EEPROM

- 40 MHz system clock

- Easy connection of two daughter-boards

Specially designed for wireless transmitter development, can also be used for other computer related highperformance applications.

APA, Harvard, Vancouver, ISO, and other styles
9

Porter, Jim, and Tom Meyers. "CARD-BASEDTELEMETRY RECEIVERS." International Foundation for Telemetering, 1994. http://hdl.handle.net/10150/608824.

Full text
Abstract:
International Telemetering Conference Proceedings / October 17-20, 1994 / Town & Country Hotel and Conference Center, San Diego, California
Embedded "Card-Based" receivers are one of the latest innovations in telemetry reception. These products provide substantial power and flexibility in a small form factor (one slot, PC or VME). In many applications they are a cost effective alternative to conventional telemetry receivers. This paper analyzes currently available products with regard to their features, capabilities, and performance, as well as highlighting typical applications.
APA, Harvard, Vancouver, ISO, and other styles
10

Klezla, Petr. "Měřicí karta pro PC s I51." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-217845.

Full text
Abstract:
The main topic of the thesis is to suggest and realize the measuring card with analog inputs and outputs. In the first part of this thesis we are concerned with key-elements of measuring cards, respectively ADC and DAC, and here are explained all their activities. Then we attend of choosing parts for suggested measuring card as is voltage reference, power supply and operational amplifier. Among others we are concerned with a question of protecting inputs against overvoltage and reversing of polarity and beside against disturbance. Then follows analysis of used microcontroller ADUC831 with description of its used outskirts. Here is described the stored for measured samples of MMC memory, how to work with it and the programme service. The last chapter describes suggested firmware and servicing programme for PC. In fine we value the quality of measuring card and its mistakes.
APA, Harvard, Vancouver, ISO, and other styles
11

Nečesaný, Jaroslav. "Realizace miniaturních PC monitorů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219814.

Full text
Abstract:
Objective of the Master Thesis was to bring in two solutions of miniature PC display. One of them uses the VGA signal as the source of the data. The second uses USB for communication. Display using USB was chosen to be produced. Device contains LCD screen, SD card reader and audio DAC with mini speaker. Software running on the PC allows user to watch part of the screen of the computer. Position and size of the chosen part may be varied. The display may be controlled by touch screen. One part of the software running on PC is a simple video player.
APA, Harvard, Vancouver, ISO, and other styles
12

O’Cull, Douglas. "Design and Performance of Card Level Telemetry Receivers and Combiners." International Foundation for Telemetering, 1996. http://hdl.handle.net/10150/607634.

Full text
Abstract:
International Telemetering Conference Proceedings / October 28-31, 1996 / Town and Country Hotel and Convention Center, San Diego, California
This paper will discuss the design and performance of card level telemetry receivers and combiners. This will include products that have been designed to operate in compact computer controlled environments such as VME chassis, VXI chassis and personal computers using ISA buses. The paper will discuss design considerations required to overcome limitation of this environment such as noise and space. The paper will also discuss the performance of a telemetry receiver and combiner in this environment. This will include performance test results such as bit error rate test, phase noise measurements and combiner improvement measurements. Finally, the paper will discuss typical applications of card level telemetry receivers and combiners.
APA, Harvard, Vancouver, ISO, and other styles
13

Kasap, Onur. "Development Of A Pc Numerical System For High Voltage Sphere Gap Control." Master's thesis, METU, 2005. http://etd.lib.metu.edu.tr/upload/12606145/index.pdf.

Full text
Abstract:
In this thesis, a high precision motion and position control system has been developed and applied to a high voltage sphere gap control and measurement system. The system is able to support up to 3-axes position and motion control. The control system includes a microcontroller card, three DC servo motor driver cards and a data storage unit. To provide communication between computer and motion control system, the Universal Serial Bus (USB) port is used. The microcontroller card is equipped with an USB interface and a PIC (Peripheral Interface Controllers) microcontroller. This microcontroller controls the dedicated motion control processors (LM629), on servo motor driver cards and read/write operations of data storage unit, which consists of a Multi Media Card.
APA, Harvard, Vancouver, ISO, and other styles
14

Chen, Shu-Chiang, and 陳書獎. "Linux Smart Card Login System with PC/SC CCID Driver." Thesis, 2002. http://ndltd.ncl.edu.tw/handle/16512095406122556411.

Full text
Abstract:
碩士
國立臺灣大學
資訊工程學研究所
90
By improvement of science technology and rapidly development of internetm, it is more important for secret and security of information. Due to the charactoristics of smart cards, such as computation and protection, we can use it to achive high security. In tradition, the login mode of Linux takes passwords of users for authentication. By this way, there exist some shortcomings in security and passwords of users may be easily stolen. Once the passwords are stolen, illegal users can voluntarily login as the same as the owners. We can avoid this condition by using smart cards for login. On the other hand, there are more application with them. This Linix smart card login system uses PC/SC standard interface to access smart cards. In addition, because USB is current common I/O interface, the USB development organization released the CCID(Chip Card Interface Device) specification for smart card interface devices. Each CCID-Compiant smart card readers will plug and play as current USB mouses in future. Thus, here we also implement a CCID driver on Linux.
APA, Harvard, Vancouver, ISO, and other styles
15

Tsai, Chih-Chien, and 蔡志堅. "A Study on Security Mechanism for PC/SC Workgroup Smart Card." Thesis, 2000. http://ndltd.ncl.edu.tw/handle/16098408702117308855.

Full text
Abstract:
碩士
國立成功大學
工程科學系
88
With rapid development in the cyber network and infrastructure of computer hardware is upgrading continuously, it is bring about the exuberant development of E-Commerce. The Internet security mechanism becomes increasingly important as the computer Hacker and virus intrude corporative Internet, stealing away business information and knocking down both hardware and software. Smart card with the functions of remote ID verification and user’s certification permission becomes one of currently practical and convenient solution. Microsoft and smart card makers have developed the standard specification for PC/SC workgroup and smart card to build up the operation system high-level module in 1996. In the mean time, 3C Home appliance integrated module are mainly based on IBM’s open card workgroup structure, moreover, centered on SUN, Java card work group has introduced a solution of trans platform smart card internet E-commerce. This treatise is focus on PC/SC workgroup v1.0 personal computer and smart card integration structure, it will look into how the smart card is integrated and it’s security mechanism and application under the current windows environment, such as Authentication, cardholder Identification, secure read/write, certificate, authority, valid certificate of permission. This thesis is wrap up by comparing relative technical structure between open card framework and Java card, finally, analyzing the Ups and downs of FISC security module.
APA, Harvard, Vancouver, ISO, and other styles
16

Lin, Jian-Ming, and 林建明. "A study of the PC Simulation on Drugs Management for Chronic Disease Patient Data Card." Thesis, 2002. http://ndltd.ncl.edu.tw/handle/wzr97b.

Full text
Abstract:
碩士
國立成功大學
工程科學系碩博士班
90
The purpose of this study is applying the IC card’s security operation to the design of the『 Chronic Disease Patient Data Card 』 for NHI。This paper explain medicine simulation step by step for PC . The Chronic Disease Patient Data Card will be recorded all the diagnosis and the medicines prescribed recently . Although the IC card is limited of the memory size , but still enough to build the patient’s chronic disease information , including the information of taboo medicine and prescribed medicine . When a patient visits to a doctor , this Chronic Disease Patient Data Card can supply the doctor with correct medicine information in real time ,to avoid the repeatative drugs doses or the sever drug interaction .So that the Chronic Disease Patient Data Card will bring the benefit of improving the service offered by Bureau of National Health Insurance and also can save the resource for business continuity.   The key point of this study is on the of design Chronic Disease Patient Data Card ,and the simulation of procedure how a doctor care a patient , the computer checking the patient repeatative drug doses , and to correct the prescription , checking sever drugs interaction .Then the system records the statistics of repeated drugs doses and sever drugs interaction for later medicinal consultions.   According to the three years drugs consumption sample data of 192 high blood pressure patients group collected from NHI , by undertaking through the proposed PC simulation schema , each HBP patient can save about 5428 NT$ per year . Take about one million HBP patients as estimated by NHI’s statistics , this could be upto a 5.5 billion NT$ saving per year .
APA, Harvard, Vancouver, ISO, and other styles
17

Wang, Yu-Sheng, and 王裕盛. "A Study of Mobile Medical Information System Based on Tablet PC and NHI IC Card." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/27833588813422713912.

Full text
Abstract:
碩士
立德管理學院
應用資訊研究所
94
Facing the increasing changes of industry environment and the national healthcare policy, Taiwan medical institutes need to improve medical service quality of patient care. As technology grows more pervasive in the healthcare environment, today medical institutes are able to generate a mobile working environment with Tablet PCs rather than personal computers that can hardly be carried easily. Doctors visiting patents can take notes on Tablet PCs which mitigate the fatigue of handwriting medical histories at each patient visit. Doctors can connect to their medical institutes’ mainframe through WLAN and reach data via VPN with secure authorization of HPC (Healthcare Professional Card). The process prevents private information from disclosure. Administrative staff in medical institutes can search for private information such as salary, account number, staff number, and other personal information with tablet PCs in each nursing station. The research uses NHI IC Card (National Health Insurance IC Card) to do authentication and HPC to do patient information security control.The accessibility of information depends on the insertion of NHI IC Card and identification checking of databases in medical institutes. Data is transferred via the connection of WLAN to medical institutes’ systems. The purpose of the research is to put forward a mobile medical information system that delivers more convenient information service to patients and administrative staff. The research has five goals. First, the system can increase the convenience of ward inspection and information accuracy. Secondly, the system can utilize NHI IC Card to do information security control and identification checking that decreases the probability of procedures conducted on wrong patients. Thirdly, the system can empower doctors to move outside of examination rooms to prescribe for patients when they are available. This shortens the waiting time for patients. Fourthly, The system can enable administrative staff in medical institutes to search for personal information, minimize administrative costs, and create a paperless working environment. Firally, technology can evolve into one with a functionality of mobility. Key words: Medical Institutes, Tablet PC, WLAN (Wireless LAN), Virtual Private Network, Healthcare Professional Card, National Health Insurance IC Card, database, mobility
APA, Harvard, Vancouver, ISO, and other styles
18

Heng, Tseng Nai, and 曾乃恆. "The Add-on Card in a PC-Based On-Line Optical Chinese Charcter Recognition System." Thesis, 1994. http://ndltd.ncl.edu.tw/handle/34777991343080141247.

Full text
APA, Harvard, Vancouver, ISO, and other styles
19

Shian, Wang Shuo, and 王碩賢. "The study of electronic signature for the medical information on Security PC platform by using the doctor''s professional card and the patient''s healthy insurance card." Thesis, 2001. http://ndltd.ncl.edu.tw/handle/20992759757948835173.

Full text
Abstract:
碩士
國立成功大學
工程科學系
89
This thesis use the doctor''s professional card and the patient''s healthy insurance card as the "card keys" to encrypt those electronic personal medical information and to build a digital signature mechanism which enable the clinical doctor signing their electronic prescription responsibly,just similarly as their writing signature which can''t be denied and forged. For the coming citizen healthy insurance IC card and the e-century,this research has shown the information of consultation from handwriting into electronic documents by programs. The configuration of hardware in this research is a PC/SC card reader,a Security PC,and the IC cards of FISC_COS provided by the Financial Information Service CO., LTD. So that the patient''s healthy insurance card and the doctor''s professional card are issued for further applications. Besides,Microsoft Visual Basic 6.0 language is the program developing tool and Microsoft Windows 98 is the software operation platform.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography