Relevant bibliographies by topics / Pellet injection

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Pellet injection'

Author: Grafiati
Published: 8 June 2024
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Pellet injection.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Pellet injection"

1

Wingen, A., B. C. Lyons, R. S. Wilcox, et al. "Simulation of pellet ELM triggering in low-collisionality, ITER-like discharges." Nuclear Fusion 61, no. 12 (2021): 126059. http://dx.doi.org/10.1088/1741-4326/ac34d7.

Full text
Abstract:
Abstract 3D nonlinear, as well as 2D linear M3D-C1 simulations are used to model ELM triggering by small pellets in DIII-D discharges in the ITER relevant, peeling-limited pedestal stability regime. A critical pellet size threshold is found in both experiment and modeling depending on pedestal conditions, pellet velocity and injection direction. Using radial injection at the outboard midplane, the threshold is determined by M3D-C1 for multiple time slices of a DIII-D low-collisionality discharge that has pellet ELM triggering. Experimental observations show that a larger pellet size than the s
APA, Harvard, Vancouver, ISO, and other styles
2

Nagami, M. "Pellet injection." Nuclear Fusion 33, no. 10 (1993): 1583–87. http://dx.doi.org/10.1088/0029-5515/33/10/413.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Szepesi, Tamás, Albrecht Herrmann, Gábor Kocsis, Ádám Kovács, József Németh, and Bernhard Ploeckl. "Table-top pellet injector (TATOP) for impurity pellet injection." Fusion Engineering and Design 96-97 (October 2015): 707–11. http://dx.doi.org/10.1016/j.fusengdes.2015.01.045.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Combs, S. K. "Pellet injection technology." Review of Scientific Instruments 64, no. 7 (1993): 1679–98. http://dx.doi.org/10.1063/1.1143995.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kovács, Á., S. Zoletnik, D. Réfy, et al. "Acceleration of cryogenic pellets for Shattered Pellet Injection." Fusion Engineering and Design 202 (May 2024): 114303. http://dx.doi.org/10.1016/j.fusengdes.2024.114303.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sheikh, U. A., D. Shiraki, R. Sweeney, et al. "Disruption thermal load mitigation with shattered pellet injection on the Joint European Torus (JET)." Nuclear Fusion 61, no. 12 (2021): 126043. http://dx.doi.org/10.1088/1741-4326/ac3191.

Full text
Abstract:
Abstract Disruption mitigation remains a critical, unresolved challenge for ITER. To aid in addressing this challenge, a shattered pellet injection (SPI) system was installed on JET and experiments conducted at a range of thermal energy fractions and stored energies in excess of 7 MJ. The primary goals of these experiments were to investigate the efficacy of the SPI on JET and the ability of the plasma to assimilate multiple pellets. Single pellet injections produced a saturation in total radiated energy (W rad) with increasing injected neon content, suggesting total radiation of stored therma
APA, Harvard, Vancouver, ISO, and other styles
7

Mori, Y., K. Ishii, R. Hanayama, et al. "Ten hertz bead pellet injection and laser engagement." Nuclear Fusion 62, no. 3 (2022): 036028. http://dx.doi.org/10.1088/1741-4326/ac3d69.

Full text
Abstract:
Abstract A laser inertial fusion energy (IFE) reactor requires repetitive injection of fuel pellets and laser engagement to fuse fusion fuel beyond a few Hz. We demonstrate 10 Hz free-fall bead pellet injection and laser engagement with γ-ray generation. Deuterated polystyrene beads with a diameter of 1 mm were engaged by counter illuminating ultra-intense laser pulses with an intensity of 5 × 1017 W cm−2 at 10 Hz. The spatial distribution of free-fall beads was 0.86 mm in the horizontal direction and 0.18 mm in the vertical direction. The system operated for more than 5 min and 3500 beads wer
APA, Harvard, Vancouver, ISO, and other styles
8

Sudo, Shigeru. "Vision of pellet injection experiments." Kakuyūgō kenkyū 55, no. 3 (1986): 272–82. http://dx.doi.org/10.1585/jspf1958.55.272.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

McFarlane, JD, GJ Judson, RK Turnbull, and BR Kempe. "An evaluation of copper-containing soluble glass pellets, copper oxide particles and injectable copper as supplements for cattle and sheep." Australian Journal of Experimental Agriculture 31, no. 2 (1991): 165. http://dx.doi.org/10.1071/ea9910165.

Full text
Abstract:
The efficacy of 3 copper (Cu) supplements in maintaining adequate Cu status in Shorthorn heifers and Merino wethers was investigated in 3 experiments on alkaline peat soils in the South East of South Australia. The Cu supplements used were: soluble glass pellets containing Cu; copper oxide particles (CuO); Cu as a subcutaneous injection. Pasture contained moderate to high concentrations of molybdenum (Mo) (2.9-12.3 mg/kg), moderate Cu (3.8-8.7 mg/kg) and adequate sulfur (>1.7 g/kg) to limit the absorption of dietary Cu in ruminants. Shorthom heifers with normal Cu status were given 1 of 6 t
APA, Harvard, Vancouver, ISO, and other styles
10

Yuan, Shaohua, Nizar Naitlho, Roman Samulyak, et al. "Lagrangian particle simulation of hydrogen pellets and SPI into runaway electron beam in ITER." Physics of Plasmas 29, no. 10 (2022): 103903. http://dx.doi.org/10.1063/5.0110388.

Full text
Abstract:
Numerical studies of the ablation of pellets and shattered pellet injection (SPI) fragments into a runaway electron beam in ITER have been performed using a time-dependent pellet ablation code [Samulyak et al., Nucl. Fusion, 61(4), 046007 (2021)]. The code resolves detailed ablation physics near pellet fragments and large-scale expansion of ablated clouds. The study of a single-fragment ablation quantifies the influence of various factors, in particular, the impact ionization by runaway electrons and cross-field transport models, on the dynamics of ablated plasma and its penetration into the r
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Pellet injection"

1

Böse, Brock (Brock Darrel). "Lithium pellet injection into high pressure magnetically confined plasmas." Thesis, Massachusetts Institute of Technology, 2010. http://hdl.handle.net/1721.1/62642.

Full text
Abstract:
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Physics, 2010.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (p. 195-201).<br>The ablation of solid pellets injected into high temperature magnetically confined plasmas is characterized by rapid oscillations in the ablation rate, and the formation of field aligned filaments in the ablatant. High speed imaging of the ablation (> 250, 000 frames/second) during the 2003-2004 campaign revealed that these filament move away from the pellet primarily in the poloidal direction with a characteristic spee
APA, Harvard, Vancouver, ISO, and other styles
2

Nakamura, Yuji. "A PELLET ABLATION MODEL IN THE PRESENCE OF MULTIPLE ENERGY CARRIERS AND ANALYSES OF PELLET INJECTION EXPERIMENTS." Kyoto University, 1986. http://hdl.handle.net/2433/74692.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Garnier, Darren Thomas. "Lithium pellet injection experiments on the Alcator C-Mod Tokamak." Thesis, Massachusetts Institute of Technology, 1996. http://hdl.handle.net/1721.1/39753.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Geulin, Eléonore. "Contribution to the modeling of pellet injection : from the injector to ablation in the plasma." Electronic Thesis or Diss., Aix-Marseille, 2023. http://www.theses.fr/2023AIXM0066.

Full text
Abstract:
La méthode privilégiée d'alimentation des machines à fusion est l'utilisation de glaçons de D et/ou T injectés dans le plasma. Ils sont utilisés actuellement, mais les résultats ne sont pas extrapolables aux futures machines de plus grande taille où le design du système d'injection et la construction de scenarii seront surtout basés sur les simulations. II est donc important de combler les vides dans les modèles existants allant de la fabrication des glaçons au dépôt de matière dans le plasma. Deux manques apparaissent : la modélisation du transport du glaçon dans le tuyau d'injection et la va
APA, Harvard, Vancouver, ISO, and other styles
5

Gomez, Camilo Ciro. "Study of electron temperature evolution during sawtoothing and pellet injection using thermal electron cyclotron emission in the Alcator C tokamak." Thesis, Massachusetts Institute of Technology, 1986. http://hdl.handle.net/1721.1/15195.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Urbahn, John A. (John Arthur). "The design and performance of a twenty barrel hydrogen pellet injector for Alcator C-Mod." Thesis, Massachusetts Institute of Technology, 1994. http://hdl.handle.net/1721.1/11627.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Teixeira, Carlos Mariz de Oliveira. "Desenvolvimento e utilização de um injetor de pastilhas de impurezas no estudo da mitigação de disrupções e atenuação de raios-X de altas energias." Universidade de São Paulo, 2008. http://www.teses.usp.br/teses/disponiveis/43/43134/tde-18112008-150605/.

Full text
Abstract:
Um injetor de pastilhas (pellets) de impurezas foi projetado, construído e instalado junto ao tokamak TCABR do Instituto de Física da Universidade de São Paulo - USP. O injetor é basicamente constituído por uma câmara com gás a alta pressão cuja vazão é controlada por uma bobina de acionamento rápido. Uma fonte de alta tensão (7kV) e alta corrente (6kA) foi construída para alimentar a bobina. Ao ser disparada, o gás propulsor (N2 ou He) acelera a pastilha para o interior do vaso do tokamak, sem que gás penetre no mesmo. Pastilhas de grafite cilíndricas com diâmetro de 0,4mm a 0,9mm, e comprime
APA, Harvard, Vancouver, ISO, and other styles
8

Gebhart, Gerald Edward III. "A Computational Study of A Lithium Deuteride Fueled Electrothermal Plasma Mass Accelerator." Thesis, Virginia Tech, 2013. http://hdl.handle.net/10919/23223.

Full text
Abstract:
Future magnetic fusion reactors such as tokamaks will need innovative, fast, deep-fueling systems to inject frozen deuterium-tritium pellets at high speeds and high repetition rates into the hot plasma core. There have been several studies and concepts for pellet injectors generated, and different devices have been proposed. In addition to fueling, recent studies show that it may be possible to disrupt edge localized mode (ELM) formation by injecting pellets or gas into the fusion plasma. The system studied is capable of doing either at a variety of plasma and pellet velocities, volumes, and r
APA, Harvard, Vancouver, ISO, and other styles
9

貴保, 藤浦, та Takayasu Fujiura. "天然長繊維強化熱可塑性生分解樹脂複合材料における成形プロセス最適化に関する研究". Thesis, https://doors.doshisha.ac.jp/opac/opac_link/bibid/BB12936621/?lang=0, 2015. https://doors.doshisha.ac.jp/opac/opac_link/bibid/BB12936621/?lang=0.

Full text
Abstract:
従来型の繊維強化プラスチック(FRP)に対し環境負荷の少ない「グリーンコンポジット」の実用的な成形プロセスの確立が切望されている。本研究では、天然繊維およびポリ乳酸を原料とする長繊維強化樹脂(LFT)ペレット製造および射出成形による複合材製造法を対象に、複合材の力学的特性に対する繊維の含有水分や熱劣化の影響、繊維分散の効果等を把握し、高い特性を発揮させるための成形プロセスおよび諸条件を提示した。<br>'Green Composites' have been attracting attention due to their high sustainability and carbon neutrality. This study investigated the preparation process for composites of long jute fiber reinforced polylactic acid by LFT-pellet manufacturing method followed by injection molding. The author explored effect of several factors, such as moisture in fiber, heat decomposition of fiber at processing
APA, Harvard, Vancouver, ISO, and other styles
10

Liu, Chiang-Hsing, and 劉江興. "A Study on Process and Properties of Metallized Plastic Pellet and Injection Molding Thereof." Thesis, 1998. http://ndltd.ncl.edu.tw/handle/51468433160452630514.

Full text
Abstract:
碩士<br>淡江大學<br>機械工程學系<br>86<br>The research had used the metallized plastic of the ABS + 20wt%PC / Al flake with three different weight percentages (20wt5, 27wt%, 33wt5). Using the design of three - zone screw in the injection molding, and get the average aspect ratio of Al flake is 156. Using the design of progressive screw in the injection molding, and get the averge aspect ratio of Al flake is 198. Using the injection molding to get the tensile, impact and shielding test specimens, and discussing the microstructure and the effect of the content and aspect ratio of Al flake. 　　From the result
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Pellet injection"

1

Xue, Ming-Lun. Considerations of Several Real Effects in Pneumatic Pellet Injection Processes. Riso National Laboratory, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Pellet injection"

1

Sudo, S., T. Baba, M. Kanno, et al. "PELLET INJECTION EXPERIMENTS ON HELIOTRON E AND DEVELOPMENTS OF HIGH SPEED PELLET INJECTOR." In Fusion Technology 1992. Elsevier, 1993. http://dx.doi.org/10.1016/b978-0-444-89995-8.50125-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

REGGIORI, Adolfo, Giulio RIVA, Giambattista DAMINELLI, Francesco SCARAMUZZI, and Antonio FRATTOLILLO. "IMPROVED TWO-STAGE GUN FOR PELLET INJECTION." In Fusion Technology 1988. Elsevier, 1989. http://dx.doi.org/10.1016/b978-0-444-87369-9.50117-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Lang, P. T., M. Alexander, C. Andelfinger, P. Cierpka, R. S. Lang, and V. Mertens. "A CENTRIFUGE FOR HIGH-SPEED PELLET INJECTION." In Fusion Technology 1994. Elsevier, 1995. http://dx.doi.org/10.1016/b978-0-444-82220-8.50128-x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

ONOZUKA, M., Y. ODA, S. KURIBAYASHI, et al. "DEVELOPMENT OF RAILGUN SYSTEM FOR HIGH-SPEED PELLET INJECTION." In Fusion Technology 1992. Elsevier, 1993. http://dx.doi.org/10.1016/b978-0-444-89995-8.50113-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sudo, S., M. Kanno, H. Kaneko, and H. Yamada. "HIGH SPEED PELLET INJECTION SYSTEM “HIPEL” FOR LARGE HELICAL DEVICE." In Fusion Technology 1994. Elsevier, 1995. http://dx.doi.org/10.1016/b978-0-444-82220-8.50130-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

KURIBAYASHI, S., M. ONOZUKA, Y. ODA, et al. "DEVELOPMENT OF RAILGUN SYSTEM TO PELLET INJECTION FOR FUSION REACTOR REFUELING." In Fusion Technology 1990. Elsevier, 1991. http://dx.doi.org/10.1016/b978-0-444-88508-1.50116-x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

"Industrial Application of Extrusion for Development of Snack Products Including Co-Injection and Pellet Technologies." In Advances in Food Extrusion Technology. CRC Press, 2016. http://dx.doi.org/10.1201/b11286-16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Saddem, Mourad, Ahmed Koubaa, and Bernard Riedl. "Properties of High-Density Polyethylene-Polypropylene Wood Composites." In Biocomposites. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.101282.

Full text
Abstract:
We investigated the effects of polymer blend variation on the physical, mechanical, and thermal properties of wood-polymer composites (WPC). We used high-density polyethylene (HDPE) and polypropylene (PP) and a combination of 80% PP, 20% HDPE, and 80% HDPE, 20% PP as polymer blends for WPC formulations to simulate recycled plastics. We used black spruce (Picea mariana Mill.) hammer milled fibers (75–250 μm) at 35 wt% as a filler for all the formulations. A two-step process was used for WPC manufacturing; pellet extrusion followed by test samples injection. Tensile and three bending tests chara
APA, Harvard, Vancouver, ISO, and other styles
9

SØRENSEN, H., P. ENGBæK, A. NORDSKOV, B. SASS, P. VILLORESI, and K.-V. WEISBERG. "A MULTISHOT PELLET INJECTOR DESIGN." In Fusion Technology 1988. Elsevier, 1989. http://dx.doi.org/10.1016/b978-0-444-87369-9.50111-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

COMBS, S. K., C. A. FOSTER, S. L. MILORA, et al. "PELLET INJECTOR RESEARCH AT ORNL." In Fusion Technology 1988. Elsevier, 1989. http://dx.doi.org/10.1016/b978-0-444-87369-9.50112-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Pellet injection"

1

Baylor, L. R., S. K. Combs, R. C. Duckworth, et al. "Pellet injection technology and applications on ITER." In 2015 IEEE 26th Symposium on Fusion Engineering (SOFE). IEEE, 2015. http://dx.doi.org/10.1109/sofe.2015.7482362.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Murakami, Masuo, Yuqiu Yang, and Hiroyuki Hamada. "Mechanical Properties of Jute/PLA Injection Molded Products-All Natural Composites." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-62819.

Full text
Abstract:
Natural composites have been important materials system due to preservation of earth environments. Natural fibers such as jute, hemp, bagasse and so on are very good candidate of natural composites as reinforcements. On the other hand regarding matrix parts thermosetting polymer and thermoplastic polymer deriver form petrochemical products are not environmental friendly material, even if thermoplastic polymer can be recycled. In order to create fully environmental friendly material (FEFM) biodegradable polymer which can be deriver from natural resources is needed. Therefore poly(lactic acid) (
APA, Harvard, Vancouver, ISO, and other styles
3

Martinez, Oscar, Sumalatha Yaski, Sarah Smith, Kara Godsey, David Rasmussen, and Gary Lovett. "Thermal-Structural and Shock Event Evaluations of the Fueling Pellet Injection System for ITER." In ASME 2024 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2024. http://dx.doi.org/10.1115/pvp2024-123447.

Full text
Abstract:
Abstract The United States is among seven partner nations in a collaborative effort to design, build, and demonstrate fusion’s ability to become a large-scale carbon-free energy source. Each country has its own domestic agencies that contribute directly to the ITER project. US ITER, which is a US Department of Energy Office of Science project managed by Oak Ridge National Laboratory, is developing world-class engineering solutions to the design, construction, and assembly of the burning plasma experiment that can demonstrate the scientific and technological feasibility of fusion. US ITER’s sco
APA, Harvard, Vancouver, ISO, and other styles
4

Meitner, S. J., L. R. Baylor, S. K. Combs, et al. "Twin-screw extruder development for the ITER pellet injection system." In 2009 23rd IEEE/NPSS Symposium on Fusion Engineering - SOFE. IEEE, 2009. http://dx.doi.org/10.1109/fusion.2009.5226408.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Signetti, Stefano, Pascal Matura, Jose Luis Sandoval Murillo, et al. "Pellet Shattering Process for the Iter Disruption Mitigation System – Part I: Development of a Discrete Element Code for Modeling the Dynamic Fragmentation of Cryogenic Materials." In 2024 17th Hypervelocity Impact Symposium. American Society of Mechanical Engineers, 2024. https://doi.org/10.1115/hvis2024-067.

Full text
Abstract:
Abstract The ITER disruption mitigation system is based on the shattered pellet injection technology. The principle of operation is to form and accelerate cm-sized cryogenic pellets up to about 800 m/s towards a shattering unit, where the pellets disintegrate into fragments entering the plasma for the mitigation process. The effectiveness of this mechanism is strongly dependent on the fragmentation characteristics. Therefore, it is important to know the role of impact conditions, namely the pellet material, velocity, impact angle, etc. The ITER DMS task force has launched a program to investig
APA, Harvard, Vancouver, ISO, and other styles
6

Erofeev, A., Tatiana Lapushkina, Serguei Poniaev, Roman Kurakin, and Boris Zhukov. "Flow Around Different Bodies at the Pellet or Plasma Jet Injection." In 50th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition. American Institute of Aeronautics and Astronautics, 2012. http://dx.doi.org/10.2514/6.2012-1027.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Combs, S. K., C. R. Foust, J. M. McGill, et al. "A new four-barrel pellet injection system for the TJ-II stellarator." In 2011 IEEE 24th Symposium on Fusion Engineering (SOFE). IEEE, 2011. http://dx.doi.org/10.1109/sofe.2011.6052244.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Sudo, S. "New Multi-functional Diagnostic Method with Tracer-encapsulated Pellet Injection on LHD." In ATOMIC AND MOLECULAR DATA AND THEIR APPLICATIONS: Joint Meeting of 14th Internat. Toki Conf. on Plasma Physics and Controlled Nuclear Fusion (ITC14); and 4th Internat. Conf. on Atomic and Molecular Data and Their Applications (ICAMDATA2004). AIP, 2005. http://dx.doi.org/10.1063/1.1944688.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Nie, Zisen, Zhongyong Chen, Wei Yan, et al. "Velocity control of Electromagnetic pellet injection based on genetic algorithm in J-TEXT." In 2023 IEEE 4th China International Youth Conference On Electrical Engineering (CIYCEE). IEEE, 2023. http://dx.doi.org/10.1109/ciycee59789.2023.10401778.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Tang, Junhui, Feng Li, Weikang Zhang, Shengguo Xia, and Junjia He. "Analysis of C-armature Deceleration Performance of Electromagnetic Pellet Injection System on J-TEXT Tokamak." In 2022 IEEE 3rd China International Youth Conference on Electrical Engineering (CIYCEE). IEEE, 2022. http://dx.doi.org/10.1109/ciycee55749.2022.9959064.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Pellet injection"

1

Marmar, E. S. Impurity pellet injection experiments at TFTR. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/6888609.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Gouge, M. J., I. C. Gomes, L. T. Gomes, and P. N, Stevens. Radiation analysis of the ITER pellet injection system. Office of Scientific and Technical Information (OSTI), 1991. http://dx.doi.org/10.2172/6134252.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Marmar, E. S. Impurity pellet injection experiments at TFTR. Final performance report. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/10103315.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Combs, S. K., L. R. Baylor, C. R. Foust, M. J. Gouge, T. C. Jernigan, and S. L. Milora. Experimental study of curved guide tubes for pellet injection. Office of Scientific and Technical Information (OSTI), 1997. http://dx.doi.org/10.2172/554870.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

M.J. Gouge and P.W. Fisher. Development of a Tritium Extruder for ITER Pellet Injection. Office of Scientific and Technical Information (OSTI), 1998. http://dx.doi.org/10.2172/1176.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Jassby, D. L., D. K. Mansfield, and M. G. Bell. High-performance supershots in TFTR with lithium pellet injection. Office of Scientific and Technical Information (OSTI), 1993. http://dx.doi.org/10.2172/10189887.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Strachan, J. D., D. K. Mansfield, and M. G. Bell. Wall conditioning experiments on TFTR using impurity pellet injection. Office of Scientific and Technical Information (OSTI), 1993. http://dx.doi.org/10.2172/10116246.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Garnier, Darren Thomas. Lithium pellet injection experiments on the Alcator C-Mod tokamak. Office of Scientific and Technical Information (OSTI), 1996. http://dx.doi.org/10.2172/448074.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Heidbrink, W. W. Energetic ion diagnostics using neutron flux measurements during pellet injection. Office of Scientific and Technical Information (OSTI), 1986. http://dx.doi.org/10.2172/6020775.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

R. Samtaney, S.C. Jardin, P. Colella, and D.F. Martin. 3D Adaptive Mesh Refinement Simulations of Pellet Injection in Tokamaks. Office of Scientific and Technical Information (OSTI), 2003. http://dx.doi.org/10.2172/820114.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Pellet injection' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography