Relevant bibliographies by topics / Pendule centrifuge / Journal articles
To see the other types of publications on this topic, follow the link: Pendule centrifuge.

Journal articles on the topic 'Pendule centrifuge'

Author: Grafiati
Published: 4 June 2021
Last updated: 7 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Pendule centrifuge.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Ineichen, Laurent. "Controllable centrifugal pendulum." PAMM 10, no. 1 (November 16, 2010): 611–12. http://dx.doi.org/10.1002/pamm.201010298.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Jinnouchi, Y., Y. Araki, J. Inoue, and S. Kubo. "Dynamic Instability of a High-Speed Rotor Containing a Partitioned Cavity Filled With Two Kinds of Liquids." Journal of Pressure Vessel Technology 111, no. 4 (November 1, 1989): 450–56. http://dx.doi.org/10.1115/1.3265703.

Full text
Abstract:
This paper is concerned with the dynamic instability of a high-speed rotor containing a partitioned cavity filled with two kinds of liquids of different density. The system considered simulates a centrifuge of two liquids type, in which the cylindrical cavity is divided into fan-shaped compartments in order to suppress asynchronous whirling motions induced by waves in the liquids traveling around the cavity. Assuming rotor vibrations to be small, liquids inviscid, and external damping negligible, perturbed motions of the liquid-rotor system are analyzed. The theory shows that the rotor containing a partitioned cavity can still exhibit unstable behavior, similar to that observed for a rotor system equipped with centrifugal pendula, in the region where the rotor speed is nearly equal to the sum of the critical speed of the system and the natural frequency of the liquids. The theory has been verified by the experiments. The dependence of the unstable region on the main system parameters is also discussed.
APA, Harvard, Vancouver, ISO, and other styles
3

Mayet, J., and H. Ulbrich. "Tautochronic centrifugal pendulum vibration absorbers." Journal of Sound and Vibration 333, no. 3 (February 2014): 711–29. http://dx.doi.org/10.1016/j.jsv.2013.09.042.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Zink, Matthias, and Markus Hausner. "The centrifugal pendulum-type absorber." ATZ worldwide 111, no. 7-8 (July 2009): 42–47. http://dx.doi.org/10.1007/bf03225088.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Hässler, Martin, Ad Kooy, Roland Welter, and Viktor Lichtenwald. "Clutch Disc With Centrifugal Pendulum Absorber." Auto Tech Review 5, no. 4 (April 2016): 26–31. http://dx.doi.org/10.1365/s40112-016-1118-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Häßler, Martin, Ad Kooy, Roland Welter, and Viktor Lichtenwald. "Clutch Disc with Centrifugal Pendulum Absorber." ATZ worldwide 118, no. 1 (December 19, 2015): 42–47. http://dx.doi.org/10.1007/s38311-015-0087-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Mitchiner, R. G., and R. G. Leonard. "Centrifugal Pendulum Vibration Absorbers—Theory and Practice." Journal of Vibration and Acoustics 113, no. 4 (October 1, 1991): 503–7. http://dx.doi.org/10.1115/1.2930214.

Full text
Abstract:
Reciprocating mechanical systems, such as pumps and compressors, present a nonuniform dynamic load to the driving motor. These load variations and their interactions with the dynamic characteristics of the motor result in dynamic torque variations on the rotor which have very significant harmonic components. These torque variations contribute to undesirable dynamic loading of the mounting frame and subsequent transmission of vibrations and noise into the supporting structure. Centrifugal pendulum absorbers offer an excellent means for the elimination of the effects of some of these torque harmonics. Since most reciprocating machinery operates over a speed range depending on load conditions, the centrifugal absorber is an excellent means for insuring that the suppression of vibrations is insensitive to speed and local conditions. While the virtues of centrifugal absorbers are well known as are the differential equations describing the dynamics of the absorbers, the literature does not address the case of real absorbers with distributed mass properties. This paper presents a derivation of the equations of motion for the rotor and the distributed mass pendulum, along with those insights and techniques necessary for the practical design of a centrifugal pendulum system. The tuning of the pendulum is discussed along with damping requirements. A case study is presented where a set of pendulums is employed on the rotor of an air compressor driven by a close-coupled electric induction motor. In the case study, first and second harmonic rotor torques (30 percent and 9 percent, respectively, of the average rotor torque) are eliminated with 3.77 lb and 0.83 lb pendulums in a 3-horsepower, 875 rpm machine.
APA, Harvard, Vancouver, ISO, and other styles
8

Pitre, Sangita N., S. V. Dhurandhar, D. G. Blair, and Ju Li. "Losses in pendular suspensions due to centrifugal coupling." Pramana 42, no. 3 (March 1994): 261–70. http://dx.doi.org/10.1007/bf02847687.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Cera, Mattia, Marco Cirelli, Ettore Pennestrì, and Pier Paolo Valentini. "Design analysis of torsichrone centrifugal pendulum vibration absorbers." Nonlinear Dynamics 104, no. 2 (April 2021): 1023–41. http://dx.doi.org/10.1007/s11071-021-06345-y.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kwak, Gyubin, and Hyeong-ill Lee. "Investigation of the Point-Mass Pendulum Centrifugal Pendulum Absorber Using Transfer Matrix Method." Transactions of the Korean Society for Noise and Vibration Engineering 31, no. 1 (February 20, 2021): 64–72. http://dx.doi.org/10.5050/ksnve.2021.31.1.064.

Full text
APA, Harvard, Vancouver, ISO, and other styles
11

Fainerman, I. A., and L. A. Zabolotskii. "Improvement of the dynamics of centrifuges mounted on pendulum suspensions." Chemical and Petroleum Engineering 28, no. 2 (February 1992): 95–98. http://dx.doi.org/10.1007/bf01148829.

Full text
APA, Harvard, Vancouver, ISO, and other styles
12

Newland, David E. "Developments in the Design of Centrifugal Pendulum Vibration Absorbers." International Journal of Acoustics and Vibration 25, no. 2 (June 30, 2020): 266–77. http://dx.doi.org/10.20855/ijav.2020.25.21687.

Full text
Abstract:
For over 60 years, the torsional vibration of reciprocating aircraft engines has been controlled by centrifugal pendulum vibration absorbers. Loose weights attached to an engine's crankshaft act as tuned-mass absorbers by oscillating at a frequency in proportion to rotational speed. More recently, similar loose masses have been attached to the flywheels of automobile engines. The need to achieve increased power from fewer cylinders, while reducing weight and improving economy, has exacerbated torsional vibration of the drive train. The dynamics of a wheel carrying many centrifugal pendulums of bifilar design has been the subject of a growing literature, but much less has been written about roller-type pendulums and about overall system performance. This paper is a new analysis of bifilar and roller systems and their design requirements. The current state of knowledge about practical design limitations is explained and the need for further research discussed.
APA, Harvard, Vancouver, ISO, and other styles
13

Haddow, Alan G., and Steven W. Shaw. "Centrifugal Pendulum Vibration Absorbers: An Experimental and Theoretical Investigation." Nonlinear Dynamics 34, no. 3/4 (December 2003): 293–307. http://dx.doi.org/10.1023/b:nody.0000013509.51299.c0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
14

ISHIDA, Yukio, Tsuyoshi INOUE, Taishi KAGAWA, and Motohiko UEDA. "710 Torsional Vibration Suppression by Centrifugal Pendulum Vibration Absorbers." Proceedings of the Dynamics & Design Conference 2003 (2003): _710–1_—_710–6_. http://dx.doi.org/10.1299/jsmedmc.2003._710-1_.

Full text
APA, Harvard, Vancouver, ISO, and other styles
15

Chao, C. P., C. T. Lee, and S. W. Shaw. "NON-UNISON DYNAMICS OF MULTIPLE CENTRIFUGAL PENDULUM VIBRATION ABSORBERS." Journal of Sound and Vibration 204, no. 5 (July 1997): 769–94. http://dx.doi.org/10.1006/jsvi.1997.0960.

Full text
APA, Harvard, Vancouver, ISO, and other styles
16

Hollkamp, J. J., R. L. Bagley, and R. W. Gordon. "A CENTRIFUGAL PENDULUM ABSORBER FOR ROTATING, HOLLOW ENGINE BLADES." Journal of Sound and Vibration 219, no. 3 (January 1999): 539–49. http://dx.doi.org/10.1006/jsvi.1998.1964.

Full text
APA, Harvard, Vancouver, ISO, and other styles
17

MATSUMURA, Shigeki, and Haruo HOUJOH. "374 Applying Centrifugal Pendulum Vibration Absorber to Gear System." Proceedings of the Dynamics & Design Conference 2009 (2009): _374–1_—_374–3_. http://dx.doi.org/10.1299/jsmedmc.2009._374-1_.

Full text
APA, Harvard, Vancouver, ISO, and other styles
18

Erofeev, Vladimir Ivanovich, Alexey Olegovich Malkhanov, Grigory Yakovlevich Panovko, and Vladimir Mikhailovich Sandalov. "CENTRIFUGAL PENDULUM DYNAMIC DAMPER OF VIBRATIONS OF ROTOR SYSTEMS." Проблемы машиностроения и автоматизации, no. 2 (2021): 99–106. http://dx.doi.org/10.52261/02346206_2021_2_99.

Full text
APA, Harvard, Vancouver, ISO, and other styles
19

LIANG, CHI-HSIUNG, and PI-CHENG TUNG. "A FUZZY NEURAL NETWORK FOR THE ACTIVE VIBRATION CONTROL OF A CENTRIFUGAL PENDULUM VIBRATION ABSORBER." International Journal of Modern Physics C 20, no. 12 (December 2009): 1963–79. http://dx.doi.org/10.1142/s0129183109014850.

Full text
Abstract:
In this study, we develop a fuzzy back-propagation (BP) neural network controller for active vibration control of a centrifugal pendulum vibration absorber (CPVA). The fuzzy BP neural network controller systems can be viewed as a conventional fuzzy algorithm for coarse tuning. The BP algorithm can also be applied for fine tuning, in this case to regulate the anti-resonance frequency in an active pendulum vibration absorber (APVA), by suppressing vibration of the carrier. The dynamic model of the APVA was developed and simulated using MATLAB. In the simulation results, when the frequency of the disturbance changes, the outputs of the fuzzy BP neural network controller are used to determine an appropriate value for the torque of the active pendulum such that the vibration amplitude of the carrier is minimized. A comparison of the carrier vibration results for the CPVA, the fuzzy algorithm and the fuzzy BP algorithm is performed. The simulation results demonstrate the effectiveness of the proposed fuzzy BP neural network APVA for reducing the carrier vibrations.
APA, Harvard, Vancouver, ISO, and other styles
20

Pfabe, Mathias, and Christoph Woernle. "Reduction of Periodic Torsional Vibration using Centrifugal Pendulum Vibration Absorbers." PAMM 9, no. 1 (December 2009): 285–86. http://dx.doi.org/10.1002/pamm.200910116.

Full text
APA, Harvard, Vancouver, ISO, and other styles
21

Peinemann, Bernd. "Centrifugal pendulum vibration absorber — an alternative method of vibration reduction?" ATZ worldwide 103, no. 4 (April 2001): 6–8. http://dx.doi.org/10.1007/bf03226435.

Full text
APA, Harvard, Vancouver, ISO, and other styles
22

Susanto, Sri Nur Hari. "Desentralisasi Asimetris dalam Konteks Negara Kesatuan." Administrative Law and Governance Journal 2, no. 4 (November 2, 2019): 631–39. http://dx.doi.org/10.14710/alj.v2i4.631-639.

Full text
Abstract:
Abstract The correlation between decentralization and deconcentration on the concept of a unitary state and a federal state is not dichotomous but rather forms a matrix or continuum relationship. Within the continuum, it is possible to shift the pendulum swing both centripetally (concentrating or cone in a higher power) or centrifugal (spreading or dispersing into the power of smaller government units). In the practice of relations between the center and the regions in various countries, the pendulum swing of unitarism (unity) and federalism move in opposite directions. Keywords: Decentralization, Asymmetric, Republic of Indonesia Abstrak Korelasi hubungan desentralisasi dan dekonsentrasi antara konsep negara kesatuan dengan negara federal tidak bersifat dikhotomis yang saling berlawanan, melainkan membentuk sebuah hubungan matriks atau kontinum. Dalam rentang garis kontinum tadi, sangat dimungkinkan terjadinya pergeseran pendulum baik yang bersifat sentripetal (memusat atau mengerucut dalam kekuasaan yang lebih tinggi) maupun yang sentrifugal (menyebar atau pemencaran kedalam kekuasaan unit pemerintahan yang lebih kecil). Dalam praktik hubungan antara pusat dan daerah di berbagai negara, pendulum unitarisme (kesatuan) dan federalisme saling bergerak ke arah yang berlawanan. Kata Kunci: Desentralisasi, Asimetris, Negara Kesatuan Republik Indonesia.
APA, Harvard, Vancouver, ISO, and other styles
23

Yoshida, Y. "Development of a Centrifugal Pendulum Absorber for Reducing Ship Superstructure Vibration." Journal of Vibration and Acoustics 111, no. 4 (October 1, 1989): 404–11. http://dx.doi.org/10.1115/1.3269876.

Full text
Abstract:
A vibration absorber (designated as the Super Dynamic Damper) for installation on ship superstructures, based on a tuned centrifugal pendulum concept, was developed through theoretical analyses followed by tests on units mounted on a vibrating platform and on actual ships. The tests confirmed the analytically estimated performance, and demonstrated that the vibrating amplitude would be reduced, to limit it to a constant low level independent of imparted exciting force. Results of analysis indicate the most important quality demanded of a tuned absorber to be the tuning accuracy. The tolerance permissible for the tuning accuracy is determined by the mass ratio: A smaller mass ratio calls for correspondingly higher tuning accuracy. The centrifugal pendulums are governed by Coulomb damping, which results in a damping behavior distinct from normal viscous damping. Both analysis and measurements attested to the importance of accurately controlling the absorber rotating speed, short of which the absorber risked becoming a vibration amplifier.
APA, Harvard, Vancouver, ISO, and other styles
24

Shi, Chengzhi, Steven W. Shaw, and Robert G. Parker. "Vibration reduction in a tilting rotor using centrifugal pendulum vibration absorbers." Journal of Sound and Vibration 385 (December 2016): 55–68. http://dx.doi.org/10.1016/j.jsv.2016.08.035.

Full text
APA, Harvard, Vancouver, ISO, and other styles
25

Lee, C. T., and S. W. Shaw. "THE NON-LINEAR DYNAMIC RESPONSE OF PAIRED CENTRIFUGAL PENDULUM VIBRATION ABSORBERS." Journal of Sound and Vibration 203, no. 5 (June 1997): 731–43. http://dx.doi.org/10.1006/jsvi.1996.0707.

Full text
APA, Harvard, Vancouver, ISO, and other styles
26

ALSUWAIYAN, A. S., and S. W. SHAW. "PERFORMANCE AND DYNAMIC STABILITY OF GENERAL-PATH CENTRIFUGAL PENDULUM VIBRATION ABSORBERS." Journal of Sound and Vibration 252, no. 5 (May 2002): 791–815. http://dx.doi.org/10.1006/jsvi.2000.3534.

Full text
APA, Harvard, Vancouver, ISO, and other styles
27

Pennestrì, Ettore, Pier Paolo Valentini, Romualdo Paga, and Marco Cirelli. "Performance evaluation of different centrifugal pendulum morphologies through multibody dynamics simulation." International Journal of Vehicle Performance 7, no. 1/2 (2021): 61. http://dx.doi.org/10.1504/ijvp.2021.10035869.

Full text
APA, Harvard, Vancouver, ISO, and other styles
28

Cirelli, Marco, Romualdo Paga, Pier Paolo Valentini, and Ettore Pennestrì. "Performance evaluation of different centrifugal pendulum morphologies through multibody dynamics simulation." International Journal of Vehicle Performance 7, no. 1/2 (2021): 61. http://dx.doi.org/10.1504/ijvp.2021.113414.

Full text
APA, Harvard, Vancouver, ISO, and other styles
29

Shaw, S. W., and S. Wiggins. "Chaotic Motions of a Torsional Vibration Absorber." Journal of Applied Mechanics 55, no. 4 (December 1, 1988): 952–58. http://dx.doi.org/10.1115/1.3173747.

Full text
Abstract:
We consider large amplitude motions of a pendulum-type centrifugal vibration absorber which is used for the reduction of torsional oscillations in rotating machinery. The basic two degree-of-freedom model is shown to possess chaotic dynamics for certain ranges of parameter values. The method used is a variation of Melnikov’s method (cf., Guckenheimer and Holmes, (1983), Chapter 4) developed for slowly varying oscillators (Wiggins and Holmes (1987), Wiggins and Shaw (1988)).
APA, Harvard, Vancouver, ISO, and other styles
30

Bubnov, V. A. "Improvement of the design and the manufacturing technology of rotors of pendulum centrifuges." Chemical and Petroleum Engineering 22, no. 4 (April 1986): 162–64. http://dx.doi.org/10.1007/bf01149251.

Full text
APA, Harvard, Vancouver, ISO, and other styles
31

Cirelli, Marco, Emanuele Capuano, Pier Paolo Valentini, and Ettore Pennestrì. "The tuning conditions for circular, cycloidal and epicycloidal centrifugal pendula: A unified cartesian approach." Mechanism and Machine Theory 150 (August 2020): 103859. http://dx.doi.org/10.1016/j.mechmachtheory.2020.103859.

Full text
APA, Harvard, Vancouver, ISO, and other styles
32

Cirone, M. A., G. Metikas, and W. P. Schleicha. "Unusual Bound or Localized States." Zeitschrift für Naturforschung A 56, no. 1-2 (February 1, 2001): 48–60. http://dx.doi.org/10.1515/zna-2001-0109.

Full text
Abstract:
Abstract We summarize unusual bound or localized states in quantum mechanics. Our guide through these intriguing phenomena is the classical physics of the upside-down pendulum, taking advantage of the analogy between the corresponding Newton’s equation of motion and the time independent Schrödinger equation. We discuss the zero-energy ground state in a three-dimensional, spatially oscillating, potential. Moreover, we focus on the effect of the attractive quantum anti-centrifugal potential that only occurs in a two-dimensional situation.
APA, Harvard, Vancouver, ISO, and other styles
33

Song, Seong-Young, Soon-Cheol Shin, and Gi-Woo Kim. "Torsional Vibration Isolation Performance Evaluation of Centrifugal Pendulum Absorbers for Clutch Dampers." Transactions of the Korean Society for Noise and Vibration Engineering 26, no. 4 (August 20, 2016): 436–42. http://dx.doi.org/10.5050/ksnve.2016.26.4.436.

Full text
APA, Harvard, Vancouver, ISO, and other styles
34

Jang, Yongho, Suresh Kumar Jayachandran, and Sungkoo Lee. "Study on Centrifugal Pendulum DMF Performance in Automotive Application during the Driving." Transactions of the Korean Society of Automotive Engineers 27, no. 10 (October 1, 2019): 771–76. http://dx.doi.org/10.7467/ksae.2019.27.10.771.

Full text
APA, Harvard, Vancouver, ISO, and other styles
35

Lee, Sungkoo, Suresh Kumar Jayachandran, Yongho Jang, and Dongsoo Lee. "Torsional Filtration Improvement with Centrifugal Pendulum DMF in Rear Wheel Drive System." International Journal of Automotive Technology 20, no. 5 (August 10, 2019): 917–22. http://dx.doi.org/10.1007/s12239-019-0085-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
36

Mayet, J., and H. Ulbrich. "First-order optimal linear and nonlinear detuning of centrifugal pendulum vibration absorbers." Journal of Sound and Vibration 335 (January 2015): 34–54. http://dx.doi.org/10.1016/j.jsv.2014.09.017.

Full text
APA, Harvard, Vancouver, ISO, and other styles
37

Shi, Chengzhi, Robert G. Parker, and Steven W. Shaw. "Tuning of centrifugal pendulum vibration absorbers for translational and rotational vibration reduction." Mechanism and Machine Theory 66 (August 2013): 56–65. http://dx.doi.org/10.1016/j.mechmachtheory.2013.03.004.

Full text
APA, Harvard, Vancouver, ISO, and other styles
38

Zhang, Yi, Guangqiang Wu, and Guoqiang Zhao. "Effects of gravity of centrifugal pendulum vibration absorber on its damping performance." International Journal of Vehicle Performance 1, no. 1 (2021): 1. http://dx.doi.org/10.1504/ijvp.2021.10040313.

Full text
APA, Harvard, Vancouver, ISO, and other styles
39

Sharif-Bakhtiar, M., and S. W. Shaw. "Effects of Nonlinearities and Damping on the Dynamic Response of a Centrifugal Pendulum Vibration Absorber." Journal of Vibration and Acoustics 114, no. 3 (July 1, 1992): 305–11. http://dx.doi.org/10.1115/1.2930262.

Full text
Abstract:
The nonlinear dynamic response of a centrifugal pendulum vibration absorber with damping in both the primary system and the pendulum is analyzed using the methods of harmonic balance and Floquet theory. Periodic solutions are approximated by the first harmonic of the response and it is shown that for low and moderate response amplitudes the resulting frequency response curves agree well with results from simulations of the full nonlinear equations of motion. Particular attention is paid to the response at the anti-resonance frequency, that is, the operating frequency for which the absorber is tuned. Cases are demonstrated for which there exists more than one stable steady-state periodic motion of the system at the anti-resonance frequency; this particular property of the system is due to nonlinear effects and cannot be captured through the traditional linear analysis. Furthermore, it is shown that for certain ranges of parameter values the only stable periodic response of the system at the anti-resonance frequency is one of large amplitude, and it cannot be predicted by linear analysis. The effects of system parameters on the shifting of the anti-resonance frequency and on the corresponding carrier amplitude are also considered.
APA, Harvard, Vancouver, ISO, and other styles
40

Geist, Bruce, Venkatanarayanan Ramakrishnan, Pradeep Attibele, and William Resh. "Precision requirements for the bifilar hinge slots of a centrifugal pendulum vibration absorber." Precision Engineering 52 (April 2018): 1–14. http://dx.doi.org/10.1016/j.precisioneng.2017.08.001.

Full text
APA, Harvard, Vancouver, ISO, and other styles
41

Demeulenaere, Bram, Pieter Spaepen, and Joris De Schutter. "Input torque balancing using a cam-based centrifugal pendulum: design procedure and example." Journal of Sound and Vibration 283, no. 1-2 (May 2005): 1–20. http://dx.doi.org/10.1016/j.jsv.2004.03.029.

Full text
APA, Harvard, Vancouver, ISO, and other styles
42

Demeulenaere, B., P. Spaepen, and J. De Schutter. "Input torque balancing using a cam-based centrifugal pendulum: design optimization and robustness." Journal of Sound and Vibration 283, no. 1-2 (May 2005): 21–46. http://dx.doi.org/10.1016/j.jsv.2004.04.003.

Full text
APA, Harvard, Vancouver, ISO, and other styles
43

Gomez, Erik R., Ines Lopez Arteaga, and Leif Kari. "Normal-force dependant friction in centrifugal pendulum vibration absorbers: Simulation and experimental investigations." Journal of Sound and Vibration 492 (February 2021): 115815. http://dx.doi.org/10.1016/j.jsv.2020.115815.

Full text
APA, Harvard, Vancouver, ISO, and other styles
44

NISHIMURA, Keisuke, Takashi IKEDA, and Yuji HARATA. "502 Vibration Suppression of Torsional Rotating Shafts Using Multiple Centrifugal Pendulum Vibration Absorbers." Proceedings of Conference of Chugoku-Shikoku Branch 2015.53 (2015): _502–1_—_502–2_. http://dx.doi.org/10.1299/jsmecs.2015.53._502-1_.

Full text
APA, Harvard, Vancouver, ISO, and other styles
45

Sharif-Bakhtiar, M., and S. W. Shaw. "The dynamic response of a centrifugal pendulum vibration absorber with motion-limiting stops." Journal of Sound and Vibration 126, no. 2 (October 1988): 221–35. http://dx.doi.org/10.1016/0022-460x(88)90237-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
46

GOTO, Akira, Takahiro RYU, Takashi NAKAE, and Kenichiro MATSUZAKI. "Fundamental study of optimum path of centrifugal pendulum vibration absorber in automatic transmission." Proceedings of the Dynamics & Design Conference 2018 (2018): 205. http://dx.doi.org/10.1299/jsmedmc.2018.205.

Full text
APA, Harvard, Vancouver, ISO, and other styles
47

Cirelli, Marco, Mattia Cera, Ettore Pennestrì, and Pier Paolo Valentini. "Nonlinear design analysis of centrifugal pendulum vibration absorbers: an intrinsic geometry-based framework." Nonlinear Dynamics 102, no. 3 (October 31, 2020): 1297–318. http://dx.doi.org/10.1007/s11071-020-06035-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
48

Alsuwaiyan, Abdullah S., and Steven W. Shaw. "Non-synchronous and Localized Responses of Systems of Identical Centrifugal Pendulum Vibration Absorbers." Arabian Journal for Science and Engineering 39, no. 12 (November 14, 2014): 9205–17. http://dx.doi.org/10.1007/s13369-014-1464-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
49

Vidmar, Brendan J., Brian F. Feeny, Steven W. Shaw, Alan G. Haddow, Bruce K. Geist, and Nathan J. Verhanovitz. "The effects of Coulomb friction on the performance of centrifugal pendulum vibration absorbers." Nonlinear Dynamics 69, no. 1-2 (December 30, 2011): 589–600. http://dx.doi.org/10.1007/s11071-011-0289-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
50

Nishimura, Keisuke, Takashi Ikeda, and Yuji Harata. "Localization phenomena in torsional rotating shaft systems with multiple centrifugal pendulum vibration absorbers." Nonlinear Dynamics 83, no. 3 (October 20, 2015): 1705–26. http://dx.doi.org/10.1007/s11071-015-2441-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography