Relevant bibliographies by topics / Perovskite cell

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Perovskite cell'

Author: Grafiati
Published: 4 June 2021
Last updated: 25 May 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Perovskite cell.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Perovskite cell"

1

Janendra Pratap, Et al. "Modeling and Investigation of Highly Efficient Environment Friendly Perovskite Solar Cell with CuSbS2 as Hole Transport Layer." International Journal on Recent and Innovation Trends in Computing and Communication 11, no. 9 (November 5, 2023): 4385–93. http://dx.doi.org/10.17762/ijritcc.v11i9.9925.

Full text
Abstract:
The presence of lead and its associated toxicity represents a hindrance to the broad commercial production of lead halide perovskites and their utilization in solar photovoltaic devices. Although lead halide perovskites have found extensive application in solar cell technology, questions have arisen regarding the hazardous nature and durability of lead (Pb) in photovoltaic systems. This research seeks to address these concerns by exploring alternative materials, such as tin-based perovskites, to pave the way for cleaner and more sustainable energy solutions. The scientific community has shown increased interest in tin-based perovskites due to their superior efficiency and stability compared to lead-based perovskite solar cell. This research introduces a planar heterojunction solar cell utilizing tin-based perovskites that are free of lead. The simulation task was conducted using SCAPS-1d software. Device parameters for a lead-free PSC (perovskite solar cell) using significant framework FTO/WS2/CH3NH3SnI3(perovskite)/CuSbS2 included an examination of factors like perovskite layer thickness, the obsession of acceptors in the perovskite layer, defects density of perovskite layer, and the band gap of the perovskite layer. In this setup, WS2 served as the ETL material, CuSbS2 functioned as the HTL material, and the CH3NH3SnI3(Perovskite) was used as the absorber layer material. This configuration achieved an impressive PCE 32.5%, along with a Jsc34.1mAcm-², Voc1.02V and FF85.5%. These optimized results likelihood indicates the strong prospect for development of an eco-friendly and efficient model of PSC (perovskite solar cell).
APA, Harvard, Vancouver, ISO, and other styles
2

Baeva, M., D. Gets, E. Bodyago, A. Mozharov, V. Neplokh, A. Nasibulin, I. Mukhin, and S. Makarov. "ITO-free Perovskite Light-Emitting Electrochemical Cell." Journal of Physics: Conference Series 2015, no. 1 (November 1, 2021): 012010. http://dx.doi.org/10.1088/1742-6596/2015/1/012010.

Full text
Abstract:
Abstract Since Complementary metal–oxide–semiconductor technology is the conventional technology for micro- and optoelectronics, integration of emerging materials, such as halide perovskites, into the process is an important branch of perovskite technologies development. In this regard ITO free device research becomes increasingly important. The Perovskite Light-Emitting electrochemical cells are a promising alternative to conventional Perovskite Light Emitting Diodes. In this work we demonstrate green (λEL = 523 nm) CsPbBr3 Perovskite Light-Emitting electrochemical cells with luminescence intensity of 50 kd/m2 integrated with Si++(111) substrate.
APA, Harvard, Vancouver, ISO, and other styles
3

Ramli, Ain Ajeerah, Abd Khamim Ismail, Rosnita Muhammad, and Muhamad Faiz Hashim. "A MINI-REVIEW OF RECENT STUDIES ON LEAD AND LEAD-FREE PEROVSKITE MATERIALS FOR SOLAR CELLS APPLICATION AND THEIR ISSUES." Jurnal Teknologi 84, no. 6 (September 25, 2022): 135–46. http://dx.doi.org/10.11113/jurnalteknologi.v84.18208.

Full text
Abstract:
Perovskite is gaining popularity in solar cell technologies and optoelectronics that rely on lead-based material. Perovskite solar cell (PSC) technologies are viewed as promising forthcoming innovations for their proficiency and monetary of the thin film due to high demand in the technology market. Lead-free perovskite material has become a viable alternative to lead-based perovskite, which has dominated the solar cell market for many years, due to toxicity and stability difficulties that have plagued lead-based solar cells. The large-scale commercial manufacture of lead-free halide perovskites solar cells can be expanded and its benefits in the solar field could be enhanced. Compared with lead-based perovskite, the lead-free perovskite material could also achieve a high-power conversion efficiency (PCE) indicating good solar cell performance. This review studied the perovskite materials, challenge of lead perovskite solar cell commercialization and summarizes recent research work regarding the perovskite solar cell. Moreover, this review forecast the future of perovskite solar cells in parallel with the Third Generation of Solar Cells.
APA, Harvard, Vancouver, ISO, and other styles
4

Zhou, Dahua, Leyong Yu, Peng Zhu, Hongquan Zhao, Shuanglong Feng, and Jun Shen. "Lateral Structured Phototransistor Based on Mesoscopic Graphene/Perovskite Heterojunctions." Nanomaterials 11, no. 3 (March 5, 2021): 641. http://dx.doi.org/10.3390/nano11030641.

Full text
Abstract:
Due to their outstanding optical properties and superior charge carrier mobilities, organometal halide perovskites have been widely investigated in photodetection and solar cell areas. In perovskites photodetection devices, their high optical absorption and excellent quantum efficiency contribute to the responsivity, even the specific detectivity. In this work, we developed a lateral phototransistor based on mesoscopic graphene/perovskite heterojunctions. Graphene nanowall shows a porous structure, and the spaces between graphene nanowall are much appropriated for perovskite crystalline to mount in. Hot carriers are excited in perovskite, which is followed by the holes’ transfer to the graphene layer through the interfacial efficiently. Therefore, graphene plays the role of holes’ collecting material and carriers’ transporting channel. This charge transfer process is also verified by the luminescence spectra. We used the hybrid film to build phototransistor, which performed a high responsivity and specific detectivity of 2.0 × 103 A/W and 7.2 × 1010 Jones, respectively. To understand the photoconductive mechanism, the perovskite’s passivation and the graphene photogating effect are proposed to contribute to the device’s performance. This study provides new routes for the application of perovskite film in photodetection.
APA, Harvard, Vancouver, ISO, and other styles
5

Moiz, Syed Abdul, Ahmed N. M. Alahmadi, and Mohammed Saleh Alshaikh. "Lead-Free FACsSnI3 Based Perovskite Solar Cell: Designing Hole and Electron Transport Layer." Nanomaterials 13, no. 9 (April 30, 2023): 1524. http://dx.doi.org/10.3390/nano13091524.

Full text
Abstract:
In recent years, lead-based perovskites solar cells have demonstrated excellent power-conversion efficiency. Despite their remarkable progress, the commercialization of lead-based perovskites is hampered by lead toxicity concerns. The recently discovered non-toxic FACsSnI3 perovskite has the potential to replace lead-based perovskites in solar cell applications. Since the perovskite material FACsSnI3 (FA0.85Cs0.15SnI3) is relatively new, there is a lack of information, particularly regarding the design features required for electron and hole-transport layers for efficient photovoltaic responses. The important variables, such as electron affinity, energy band gap, film thickness, and doping density of both electron and hole-transport layers, were simulated and modeled separately and iteratively in this study to achieve the most efficient photovoltaic response. Finally, the absorber layer thickness of FACsSnI3 perovskite is tuned to achieve a maximum power-conversion efficiency of slightly more than 24%. We hope that the findings of this study will serve as a strong guideline for future research and the design of lead-free perovskite solar cells for efficient photovoltaic responses.
APA, Harvard, Vancouver, ISO, and other styles
6

Abhishek Bhatt and Rohit Pant. "Analysis of Pervoskite Solar Cell Functional Theory." Applied Science and Engineering Journal for Advanced Research 1, no. 1 (January 22, 2022): 28–33. http://dx.doi.org/10.54741/asejar.1.1.5.

Full text
Abstract:
The electronic construction estimations of a substance are the focal errand because of atomistic reenactments. They make allusions to estimates of the state of electronic mobility around fixed cores. To further develop power transformation effectiveness and strength, doping is normally taken on technique to tune and adjust the constructions CH3NH3PbI3 materials' characteristics and composition in natural inorganic crossover perovskite arising sun oriented cells perovskites are a class of materials that have a perovskite structure assorted mix of various components. Because of this, result, they display various functionalities, for example, piezoelectric, ferroelectric, pyroelectric, and ferromagnetic with applications in photovoltaic cells, huge magneto-opposition, LEDs, superconductivity, and topological covers. Perovskites have gained a reputation as a viable alternative to silicon-based conventional solar cells since 2009. By and large, halide perovskites show great photonic characteristics, oxide perovskites show great dielectric properties, and chalcogenide perovskites are utilized in applications in strong state detecting, lighting, and energy collecting. In this thesis, different kinds of perovskites going from oxide to halide are examined alongside their underlying, electronic, flexible, and optical properties.
APA, Harvard, Vancouver, ISO, and other styles
7

Meyer, Edson, Dorcas Mutukwa, Nyengerai Zingwe, and Raymond Taziwa. "Lead-Free Halide Double Perovskites: A Review of the Structural, Optical, and Stability Properties as Well as Their Viability to Replace Lead Halide Perovskites." Metals 8, no. 9 (August 27, 2018): 667. http://dx.doi.org/10.3390/met8090667.

Full text
Abstract:
Perovskite solar cells employ lead halide perovskite materials as light absorbers. These perovskite materials have shown exceptional optoelectronic properties, making perovskite solar cells a fast-growing solar technology. Perovskite solar cells have achieved a record efficiency of over 20%, which has superseded the efficiency of Gräztel dye-sensitized solar cell (DSSC) technology. Even with their exceptional optical and electric properties, lead halide perovskites suffer from poor stability. They degrade when exposed to moisture, heat, and UV radiation, which has hindered their commercialization. Moreover, halide perovskite materials consist of lead, which is toxic. Thus, exposure to these materials leads to detrimental effects on human health. Halide double perovskites with A2B′B″X6 (A = Cs, MA; B′ = Bi, Sb; B″ = Cu, Ag, and X = Cl, Br, I) have been investigated as potential replacements of lead halide perovskites. This work focuses on providing a detailed review of the structural, optical, and stability properties of these proposed perovskites as well as their viability to replace lead halide perovskites. The triumphs and challenges of the proposed lead-free A2B′B″X6 double perovskites are discussed here in detail.
APA, Harvard, Vancouver, ISO, and other styles
8

Ji, Long, and Shibin Li. "Large organic cations are beneficial for slowing tin-based perovskites crystallization rate and improving efficiency." Journal of Physics: Conference Series 2306, no. 1 (November 1, 2022): 012017. http://dx.doi.org/10.1088/1742-6596/2306/1/012017.

Full text
Abstract:
Abstract In the past few years, the efficiency of perovskite cells has been improved rapidly, and the current efficiency can reach 25.8%. Since the lead in perovskite materials will pollute the environment, so people turn their attention to lead-free tin-based perovskites. Tin-based perovskites are becoming a research hotspot recently due to their nontoxic properties. However, due to the fast crystallization rate of tin-based perovskite, the improvement of the efficiency of tin-based perovskite cells is limited. In this work, by introducing ethylammonium iodine (EAI) into FA0.98SnI3 perovskite, it not only slowed down the crystallization rate of tin-based perovskite cells, but also improved the film morphology and slowed down the rate of Sn2+ oxidation, and finally achieved a solar cell conversion efficiency of 7.6%. This work provides a new strategy for the study of lead-free perovskites.
APA, Harvard, Vancouver, ISO, and other styles
9

Adjogri, Shadrack J., and Edson L. Meyer. "Chalcogenide Perovskites and Perovskite-Based Chalcohalide as Photoabsorbers: A Study of Their Properties, and Potential Photovoltaic Applications." Materials 14, no. 24 (December 18, 2021): 7857. http://dx.doi.org/10.3390/ma14247857.

Full text
Abstract:
In 2015, a class of unconventional semiconductors, Chalcogenide perovskites, remained projected as possible solar cell materials. The MAPbI3 hybrid lead iodide perovskite has been considered the best so far, and due to its toxicity, the search for potential alternatives was important. As a result, chalcogenide perovskites and perovskite-based chalcohalide have recently been considered options and potential thin-film light absorbers for photovoltaic applications. For the synthesis of novel hybrid perovskites, dimensionality tailoring and compositional substitution methods have been used widely. The study focuses on the optoelectronic properties of chalcogenide perovskites and perovskite-based chalcohalide as possibilities for future photovoltaic applications.
APA, Harvard, Vancouver, ISO, and other styles
10

Eperon, Giles E., Giuseppe M. Paternò, Rebecca J. Sutton, Andrea Zampetti, Amir Abbas Haghighirad, Franco Cacialli, and Henry J. Snaith. "Inorganic caesium lead iodide perovskite solar cells." Journal of Materials Chemistry A 3, no. 39 (2015): 19688–95. http://dx.doi.org/10.1039/c5ta06398a.

Full text
Abstract:
The vast majority of perovskite solar cell research has focused on organic–inorganic lead trihalide perovskites; herein, we present working inorganic CsPbI3perovskite solar cells for the first time.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Perovskite cell"

1

Liu, Tianyu. "Perovskite Solar Cells fabrication and Azobenzene Perovskite synthesis: a study in understanding organic-inorganic hybrid lead halide perovskite." The Ohio State University, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=osu1576840261464488.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Wei, Rongsheng. "Modelling of perovskite solar cells." Thesis, Queensland University of Technology, 2018. https://eprints.qut.edu.au/119218/1/Rongsheng_Wei_Thesis.pdf.

Full text
Abstract:
This project focuses on simulation performance of perovskite solar cells using two models. One is a simplified model developed for perovskite absorber layer of PSCs by using matlab program to investigate the effect of density of state, relative dielectric permittivity and band gap energy of the perovskite material on the device performance. The other model is based on SCAPS to investigate the influence of hole mobility and band gap offset of different hole transport materials on device performance.
APA, Harvard, Vancouver, ISO, and other styles
3

Li, Yifan Li. "High Performance Perovskite Hybrid Solar Cell Via Interfacial Engineering." University of Akron / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=akron1462812515.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Hancock, Cathryn Ann. "Anion substitution in Perovskite related materials for fuel cell applications." Thesis, University of Birmingham, 2013. http://etheses.bham.ac.uk//id/eprint/4264/.

Full text
Abstract:
The work presented in this thesis focuses on two different structures, the Ruddlesden Popper and perovskite, which have shown promise as catalysts in fuel cell devices. The Ruddlesden Popper materials have interesting structural properties allowing the possible incorporation of anions within the interstitial sites. The possible incorporation of water and fluorine into these interstitial sites was investigated for the systems La\(_2\)N\(_i\)\(_O\)\(_4\)\(_+\)\(_δ\), Nd\(_2\)NiO\(_4\)\(+\)\(_δ\), La\(_2\)CuO\(_4\)\(_+\)\(_δ\) and Sr\(_3\)Fe\(_2\)O\(_7\)\(_-\)\(_y\). In the case of water incorporation, the most interesting results were observed in La\(_2\)NiO\(_4\)\(_+\)\(_δ\). For this system, large amounts of water were shown to be incorporated using an indirect method which involved fluorination of the materials followed by ion exchange. This is the first time such a method has been demonstrated. The work on the perovskite materials (SrCoO\(_3\), SrMnO\(_3\), SrFeO\(_3\) and CaMnO\(_3\)) focused on doping with various oxyanions (phosphate, silicate and sulphate). It was discovered that small amounts of oxyanion doping could be achieved, which caused a large increase in the conductivity. This increase was correlated either to a phase change on doping or in the case of the CaMnO\(_3\) material due to the resultant electron doping. Electrochemical tests were performed to determine if the materials would be of use as cathode materials in fuel cells.
APA, Harvard, Vancouver, ISO, and other styles
5

Zhang, Jingyi. "A Life Cycle Sustainability Study of Perovskite Solar Cell Technologies." Case Western Reserve University School of Graduate Studies / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=case1554289816394232.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Lin, Wei-Chun. "IN-SITU SOLAR CELL STUDIES OF PEROVSKITE FORMATION AND DEGRADATION." Case Western Reserve University School of Graduate Studies / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=case1491403121789203.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

De, Monfreid Thybault. "Matériaux transporteurs de trou pour les cellules solaires à base de pérovskite : de l'ingénierie moléculaire à leur intégration au dispositif." Electronic Thesis or Diss., CY Cergy Paris Université, 2022. http://www.theses.fr/2022CYUN1148.

Full text
Abstract:
Le but de cette thèse est de concevoir des matériaux organiques transporteurs de trous (HTM) et de les appliquer dans des cellules solaires pérovskites (PSC) afin de caractériser leurs performances. Deux familles de matériaux innovants ont été conçus et étudiés. Les molécules choisies ont pour point commun de posséder des éléments de structures planaires dans le but d'obtenir des systèmes π étendues dans le matériau formé.La première étude consiste en la conception et la synthèse de molécules organiques de type nanographène (ou graphène moléculaire). Quatre composés de ce type ont été isolés et caractérisés et s'avèrent posséder des propriétés physico-chimiques adéquats pour leur emploi comme HTM. Sans dopant, on obtient des performances modérées, mais, grâce à l'introduction d'additifs et l'optimisation des conditions de dépôts, des rendements énergétiques (PCE) supérieurs à 18% ont été obtenus pour trois des composés étudiés. Les mesures de mobilité de trous et de photoluminescence permettent d'expliquer les bonnes performances des matériaux tandis que les différences entre les résultats photovoltaïques permettent de discuter de la fonctionnalisation choisie des arylamines terminales.La seconde étude concerne la caractérisation d'une famille de nouveaux HTM possédant une unité centrale accepteuse d'électrons commune, le thieno[3,4-c]pyrrole-4,6(5H)-dione. Trois molécules ont été synthétisées puis employées comme HTM pour la conception de cellules solaires pérovskites. A partir des performances obtenues, une optimisation et une caractérisation plus approfondie d'un des composés et leur application dans des dispositifs PSC a également été réalisé. Grâce à l'ingénierie de l'interface pérovskite/HTM en introduisant une couche de passivation adaptée, un gain en performance est accompli. De plus, la mise en évidence d'un mécanisme de diffusion ralentie des ions Li+ avec l'HTM démontre de la stabilité thermique accrue des PSC résultants. Un PCE maximum de 21,98% est atteint et conservant 86% de son efficacité initiale après un vieillissement de plus de 1000h à 85° C
The aim of this thesis is to design organic hole transporting materials (HTM) and apply them in perovskite solar cells (PSC) in order to characterize their performance. Two families of innovative materials have been designed and studied. The selected molecules have in common that they possess planar structural elements with the aim of obtaining extended π-systems in the formed material.The first study consists of the design and synthesis of organic nanographene (or molecular graphene) molecules. Four compounds have been isolated and characterized and found to possess adequate physico-chemical properties for their use as HTMs. Without dopants, moderate performances are obtained, but, thanks to the introduction of additives and the optimization of the deposition conditions, energy yields (PCE) higher than 18% have been obtained for three of the studied HBC-DPA-R compounds. Hole mobility and photoluminescence measurements help to explain the good performance of the materials while the differences in the photovoltaic results allow to discuss the chosen functionalization of the terminal arylamines.The second study concerns the characterization of a family of new HTMs possessing a common electron accepting core unit, thieno[3,4-c]pyrrole-4,6(5H)-dione. Three molecules were synthesized and then employed as HTMs for the fabrication of perovskite solar cells. Based on the obtained performances, a further optimization and characterization based on specific compound HL38 and PSCs employing this molecule has also been performed. Thanks to the engineering of the perovskite/HTM interface by introducing a suitable passivation layer, a gain in performance is achieved. Moreover, the demonstration of a slow diffusion mechanism of Li+ ions with this HTM demonstrates the enhanced thermal stability of the resulting PSCs. A maximum PCE of 21.98% is achieved and the record PSC retains 86% of its initial efficiency after aging for more than 1000h at 85°C
APA, Harvard, Vancouver, ISO, and other styles
8

Fisher, James C. "A novel fuel cell anode catalyst, perovskite LSCF compared in a fuel cell anode and tubular reactor testing /." Akron, OH : University of Akron, 2006. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=akron1152215855.

Full text
Abstract:
Thesis (M.S.)--University of Akron, Dept. of Chemical Engineering, 2006.
"December, 2006." Title from electronic thesis title page (viewed 12/31/2008) Advisor, Steven S. C. Chuang; Faculty Readers, George Chase, Lu-Kwang Ju ; Department Chair, Lu-Kwang Ju; Dean of the College, George K. Haritos; Dean of the Graduate School, George R. Newkome. Includes bibliographical references.
APA, Harvard, Vancouver, ISO, and other styles
9

Chen, Mu. "A study of polystyrene microgel particles with conjugated polymers and perovskite solar cell." Thesis, University of Manchester, 2017. https://www.research.manchester.ac.uk/portal/en/theses/a-study-of-polystyrene-microgel-particles-with-conjugated-polymers-and-perovskite-solar-cell(dc219cad-afc1-4a57-a8f8-87d22f9e97be).html.

Full text
Abstract:
This thesis presents a study of polystyrene (PS) microgel (MG), hole transfer materials (HTMs) and perovskite solar cells (PSCs) and associated effects to combine them together to increase the stabilities of PSCs. PSCs are a disruptive technology which attract a lot of attention because of their remarkable power conversion efficiency (PCE). However, PSCs are very fragile and easy to be damaged by moisture and oxygen. The PS MGs are solvent-swellable, inherently colloidally stable, hydrophobic, and have good film-forming properties. In the study, we mixed PS MG with three different HTMs, poly(3-hexylthiophene) (P3HT), Poly[bis(4-phenyl)(2,5,6-trimethylphenyl)amine (PTAA) and 2,2',7,7'-Tetrakis[N,N-di(4-methoxyphenyl)amino]-9,9'-spirobifluorene (Spiro-OMeTAD) to establish a diagram of concentrations of each component to form films. We investigated the morphology and light absorption and photoluminescence (PL) of HTM-MG films spin-coated from HTM-MG dispersions. The films containing flattened MG with an aspect ratio of around 10. MG islands containing packed particles were evident for both pure MG and P3HT-MG.
APA, Harvard, Vancouver, ISO, and other styles
10

Mirabelli, Alessandro James. "Highly efficient monolithic Perovskite/Silicon bifacial tandem solar cells." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2020. http://amslaurea.unibo.it/20369/.

Full text
Abstract:
Perovskite solar cells have been the focus of photovoltaics research in this past decade. Owing to their many favorable properties - like low cost solution processability, tunable bandgap and high efficiency, they have seen much attention in various types of solar cell designs. A promising technology has coupled perovskite cells with another semiconductor material in monolithic tandem solar cells, reaching record efficiencies of 29.15%. However, these kinds of devices require current matching condition to maximize the output of solar cells, making their fabrication challenging. Here, we propose the innovative bifacial tandem configuration to overcome current matching limits between the two sub-cells, by collecting photons from the surrounding environment, i.e. albedo. The extra light shining on our silicon bottom cell boosts the photogenerated current above monolithic tandem values. We show that the current density gain is more pronounced in perovskite solar cells with a narrow bandgap, 1.59 eV, than those with a wider one 1.7 eV. In other words, current matched tandems show little to no increase in efficiency with the extra albedo, while mismatched cells exhibit the most power, reaching up to ~28% in the best scenario. To give more credit to our work, we report outdoor data gathered in various locations around the world, and we show how different albedos have distinct effects on bifacial tandems.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Perovskite cell"

1

Perovskite oxide for solid oxide fuel cells. Dordrecht: Springer, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ishihara, Tatsumi, ed. Perovskite Oxide for Solid Oxide Fuel Cells. Boston, MA: Springer US, 2009. http://dx.doi.org/10.1007/978-0-387-77708-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Etgar, Lioz. Hole Conductor Free Perovskite-based Solar Cells. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-32991-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Nina, Orlovskaya, and Browning Nigel D, eds. Mixed ionic electronic conducting perovskites for advanced energy systems. Dordrecht: Kluwer Academic Publishers, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Yun, Sining, and Anders Hagfeldt, eds. Counter Electrodes for Dye-sensitized and Perovskite Solar Cells. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2018. http://dx.doi.org/10.1002/9783527813636.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Ovenstone, James. Hydrothermal and emulsion processing and characterisaton of perovskite ceramic powders for use in solid oxide fuel cells. Birmingham: University of Birmingham, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Mai, Andreas. Katalytische und elektrochemische Eigenschaften von eisen- und kobalthaltigen Perowskitn als Kathoden für die oxidkeramische Brennstoffzelle (SOFC). Jülich: Forschungszentrum Jülich, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Stojanović, Marko. Characterization, kinetics and redox properties of LaCr1-x NixO3 :Perovskites: Implications for combustion and solid oxide fuel cells. Ottawa: National Library of Canada = Bibliothèque nationale du Canada, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Characterization Techniques for Perovskite Solar Cell Materials. Elsevier, 2020. http://dx.doi.org/10.1016/c2017-0-01993-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Edvinsson, Tomas, Anders Hagfeldt, and Meysam Pazoki. Characterization Techniques for Perovskite Solar Cell Materials. Elsevier, 2019.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Perovskite cell"

1

Shabdan, Erkin, Blake Hanford, Baurzhan Ilyassov, Kadyrzhan Dikhanbayev, and Nurxat Nuraje. "Perovskite Solar Cell." In Multifunctional Nanocomposites for Energy and Environmental Applications, 91–111. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2018. http://dx.doi.org/10.1002/9783527342501.ch5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kim, Byeong Jo, and Hyun Suk Jung. "Flexible Perovskite Solar Cell." In Organic-Inorganic Halide Perovskite Photovoltaics, 325–41. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-35114-8_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Peng, Huisheng. "Fiber-Shaped Perovskite Solar Cell." In Fiber-Shaped Energy Harvesting and Storage Devices, 97–115. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-662-45744-3_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Strachala, Dávid, Matouš Kratochvíl, Josef Hylský, Adam Gajdoš, Ladislav Chladil, Jiří Vaněk, and Pavel Čudek. "Development of Stable Perovskite Solar Cell." In Springer Proceedings in Energy, 653–65. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-13888-2_64.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ito, Seigo. "Inorganic Hole-Transporting Materials for Perovskite Solar Cell." In Organic-Inorganic Halide Perovskite Photovoltaics, 343–66. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-35114-8_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Nkele, Agnes Chinecherem, Sabastine Ezugwu, Mutsumi Suguyima, and Fabian I. Ezema. "New Perovskite Materials for Solar Cell Applications." In Electrode Materials for Energy Storage and Conversion, 411–19. Boca Raton: CRC Press, 2021. http://dx.doi.org/10.1201/9781003145585-21.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Etgar, Lioz. "Hole Transport Material (HTM) Free Perovskite Solar Cell." In Hole Conductor Free Perovskite-based Solar Cells, 9–24. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-32991-8_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Hossain, Mohammad, Ounsi Daif, Nowshad Amin, Fahhad Alharbi, and Nouar Tabet. "Numerical Optimization of Lead Free Perovskite Solar Cell." In TMS Middle East - Mediterranean Materials Congress on Energy and Infrastructure Systems (MEMA 2015), 335–38. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2015. http://dx.doi.org/10.1002/9781119090427.ch34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hossain, Mohammad, Ounsi Daif, Nowshad Amin, Fahhad Alharbi, and Nouar Tabet. "Numerical Optimization of Lead Free Perovskite Solar Cell." In Proceedings of the TMS Middle East — Mediterranean Materials Congress on Energy and Infrastructure Systems (MEMA 2015), 335–38. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-48766-3_34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ojha, P., and A. Dahiya. "Efficient design of perovskite photovoltaic cell using CH3NH3PbI3 as perovskite and PCBM as ETM." In Recent Trends in Communication and Electronics, 344–48. London: CRC Press, 2021. http://dx.doi.org/10.1201/9781003193838-62.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Perovskite cell"

1

Graetzel, Michael. "Maximizing Perovskite Solar Cell performance." In International Conference on Perovskite Thin Film Photovoltaics and Perovskite Photonics and Optoelectronics. València: Fundació Scito, 2021. http://dx.doi.org/10.29363/nanoge.nipho.2022.025.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Jena, Hrudananda, and B. Rambabu. "Effect of Sonochemical, Regenerative Sol Gel and Microwave Assisted Synthesis Techniques on the Formation of Dense Electrolytes and Porus Electrodes for All Perovskite IT-SOFCs." In ASME 2006 4th International Conference on Fuel Cell Science, Engineering and Technology. ASMEDC, 2006. http://dx.doi.org/10.1115/fuelcell2006-97262.

Full text
Abstract:
The influence of preparation techniques on the microstructure, grain-size and consequently on the electrical transport properties of the ABO3 structured materials used as electrode and electrolytes in all perovskite IT-SOFC were investigated. Nano-crystalline powders of La1-xMxGa1-yNyO3±δ (M = Sr,; x = −0.10 to 0.15; N = Mg; y = −0.10 to 0.15) (LSGM) as electrolyte, porous La0.8Sr0.2Co0.8Fe0.2O3±δ (LSCF) or LaNi1-xFexO3±δ (x = 0–0.5) (LNF) as cathode, La0.8Sr0.2Cr0.7Mn0.3O3±δ (LSCM) as anode and LaCrO3 or substituted LaCrO 3 as interconnect were synthesized by various wet chemical methods. The wet chemical methods like metal-carboxylate gel decomposition, hydroxide co-precipitation, sonochemical and regenerative sol-gel process followed by microwave sintering of the powders have been used. Microwave sintering parameters were optimized by varying sintering time, and temperature to achieve higher density of LSGM pellets. The phase pure systems were obtained at sintering duration of 30 min at 1200 °C. The XRD, HR-TEM, and SEM measurements revealed the average grain size of these perovskites was ∼ 22 nm range. The electrical conductivities of the compositions were measured by ac (5Hz–13MHz) and dc techniques. The conductivity of the sintered pellets was found to be ∼0.01–0.21 S/cm at 550–1000°C range for electrolyte and 1.5–100 S/cm at 25–1000°C for electrodes respectively. The effect of sonochemical, and regenerative sol-gel methods in processing large quantities of nano-crystalline perovskites with multi-element substitutions at A- and B-sites to achieve physico-chemical compatibility for fabricating zero emission all perovskite IT-SOFCs are reported in this paper.
APA, Harvard, Vancouver, ISO, and other styles
3

Zhang, Jingyi, Xianfeng Gao, Yelin Deng, Yuanchun Zha, and Chris Yuan. "Cradle-to-Grave Life Cycle Assessment of Solid-State Perovskite Solar Cells." In ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/msec2017-2970.

Full text
Abstract:
With the advantages of low cost and high conversion efficiency, perovskite solar cell attracts enormous attention in recent years for research and development. However, the toxicity potential of lead used in perovskite solar cell manufacturing causes grave concern for its environmental performance. To understand and facilitate the sustainable development of perovskite solar cell, a comprehensive life cycle assessment has been conducted by using attributional life cycle assessment approach from cradle to grave, with manufacturing data from our lab experiments and literature. The results indicate that the major environmental problem is associated with system manufacturing, including gold cathode, organic solvent usage and recycling, and electricity utilization in component manufacturing process. Lead only contributes less than 1% of human toxicity and ecotoxicity potentials in the whole life cycle, which can be explained by the small amount usage of lead in perovskite dye preparation. More importantly, the uncertainties caused by life cycle inventory have been investigated in this study to show the importance of primary data source. In addition, a comparison of perovskite solar cell with conventional solar cells and other dye sensitized solar cells shows that perovskite solar cell could be a promising alternative technology for future clean power generations.
APA, Harvard, Vancouver, ISO, and other styles
4

Kevin, Liem, Nji Raden Poespawati, Raden Antaredja Kartasasmita, Muhammad Jodie Abraham Isa, Tomy Abuzairi, and Wigajatri P. Retno. "Most Efficient Perovskite Precursors Molarity for Perovskite Solar Cell." In 2020 IEEE 7th International Conference on Engineering Technologies and Applied Sciences (ICETAS). IEEE, 2020. http://dx.doi.org/10.1109/icetas51660.2020.9484209.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Lin, Hong. "Perovskite solar cell - thermoelectric tandem system: A novel method for high efficiency and stability." In Conference on Lasers and Electro-Optics/Pacific Rim. Washington, D.C.: Optica Publishing Group, 2022. http://dx.doi.org/10.1364/cleopr.2022.cthw4_02.

Full text
Abstract:
Perovskite solar cells have become a research hotspot in recent years because of their excellent optical and electrical properties. However, at present, it still has problems such as insufficient solar spectral utilization and poor photothermal stability. Herein, we present a perovskite solar cell-thermoelectric tandem system with both high efficiency and stability, proving that combining perovskite solar cells (PSCs) with thermoelectric generators (TE) to form tandem devices can effectively improve the solar utilization, while reducing the operating temperature and improving the working stability, which has a good application prospect.
APA, Harvard, Vancouver, ISO, and other styles
6

Vesce, Luigi, Maurizio Stefanelli, and Aldo Di Carlo. "Carbon-Based Perovskite Solar Cell." In IOCN 2023. Basel Switzerland: MDPI, 2023. http://dx.doi.org/10.3390/iocn2023-14539.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Chou, Hsueh-Tao, Yuan-Hao Hsu, Jing-Hua Lu, and Ho-Chun Hsu. "Preparation of perovskite active layer applied for perovskite solar cell." In 2018 IEEE International Conference on Applied System Innovation (ICASI). IEEE, 2018. http://dx.doi.org/10.1109/icasi.2018.8394425.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Pydzińska-Białek, Katarzyna, Grzegorz Nowaczyk, and Marcin Ziółek. "The transient absorption study through gold electrodes in working cell conditions." In International Conference on Perovskite Thin Film Photovoltaics and Perovskite Photonics and Optoelectronics. València: Fundació Scito, 2021. http://dx.doi.org/10.29363/nanoge.nipho.2022.002.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Sulistianto, Junivan, Akinori Konno, Nji Raden Poespawati, and Tomy Abuzairi. "Comparison of Perovskite Deposition Method on Carbon-based Perovskite Solar Cell." In 2023 10th International Conference on Power and Energy Systems Engineering (CPESE). IEEE, 2023. http://dx.doi.org/10.1109/cpese59653.2023.10303197.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Prasanna, J. Lakshmi, Ekta Goel, Amarjit Kumar, and Atul Kumar. "Computational Study of Perovskite/Perovskite Lead-free Tandem Solar Cell Devices." In 2022 IEEE International Symposium on Smart Electronic Systems (iSES). IEEE, 2022. http://dx.doi.org/10.1109/ises54909.2022.00059.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Perovskite cell"

1

Fthenakis, Vasilis. Comparative Life Cycle Analysis of Scalable Single-Junction and Tandem Perovskite Solar Cell (PSC) Systems. Office of Scientific and Technical Information (OSTI), October 2020. http://dx.doi.org/10.2172/1691513.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Van Hest, Maikel. Development of Perovskite (PVSK) Technology Related to Solar Cell Manufacturing Equipment: Cooperative Research and Development Final Report, CRADA Number CRD-18-733. Office of Scientific and Technical Information (OSTI), April 2020. http://dx.doi.org/10.2172/1659916.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hellstrom, E. E. A study of perovskite electrolytes and electrodes for intermediate - temperature Solid Oxide Fuel Cell (SOFC) applications. Final report, June 1, 1991--December 31, 1996. Office of Scientific and Technical Information (OSTI), September 1997. http://dx.doi.org/10.2172/542064.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Mitzi, David, and Yanfa Yan. High Performance Perovskite-Based Solar Cells. Office of Scientific and Technical Information (OSTI), January 2020. http://dx.doi.org/10.2172/1582433.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

McGehee, Michael. Perovskite on Silicon Tandem Solar Cells. Office of Scientific and Technical Information (OSTI), March 2021. http://dx.doi.org/10.2172/1830219.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

McGehee, Michael, and Tonio Buonassisi. Perovskite Solar Cells for High-Efficiency Tandems. Office of Scientific and Technical Information (OSTI), September 2017. http://dx.doi.org/10.2172/1420976.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Xu, Tao, and Kai Zhu. On-Device Lead Detention for Perovskite Solar Cells. Office of Scientific and Technical Information (OSTI), July 2021. http://dx.doi.org/10.2172/1830665.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Yoon, Heayoung. In-situ Characterizations of Microstructural Degradation of Perovskite Solar Cells. Office of Scientific and Technical Information (OSTI), November 2023. http://dx.doi.org/10.2172/2208889.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ong, Alison. Investigating the Effect of Pyridine Vapor Treatment on Perovskite Solar Cells. Office of Scientific and Technical Information (OSTI), August 2015. http://dx.doi.org/10.2172/1213129.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Pike, Christopher. Investigating the Effect of Pyridine Vapor Treatment on Perovskite Solar Cells - Oral Presentation. Office of Scientific and Technical Information (OSTI), August 2015. http://dx.doi.org/10.2172/1213179.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Perovskite cell' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography