Log in

Relevant bibliographies by topics / Phosphating

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Phosphating'

Author: Grafiati

Published: 4 June 2021

Last updated: 26 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Phosphating.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Phosphating"

1

Li, Yong Gang, Ying Hui Wei, Li Feng Hou, Yun Tian, and Li Jing Yang. "Research on Corrosion Resistance of AZ91D Magnesium Alloy Coated with Epoxy Resin." Materials Science Forum 686 (June 2011): 292–99. http://dx.doi.org/10.4028/www.scientific.net/msf.686.292.

Full text

Abstract:

The corrosion resistance of a 1~2mm thick AZ91D magnesium alloy die-casting coated with epoxy varnish after phosphatizing was tested. Zinc phosphating solution was used. In the experiment, uniform paint was obtained by dipping method. Scratch test showed that the adhesion force between the coating and matrix is excellent. Within the test range the optimal phosphating temperature and time are 50°C and 1 min tested by dynamic potential scanning method. With the organic coating the corrosion current density decreased 3 orders of magnitude, the polarization resistance increased 3 orders of magnitu

APA, Harvard, Vancouver, ISO, and other styles

2

Lin, Bi Lan, Yu Ye Xu, and Biao Tian. "Effect of Phosphating Technologies on Corrosion Resistance of Phosphate Coatings on 6063 Aluminum Alloy." Advanced Materials Research 399-401 (November 2011): 2079–82. http://dx.doi.org/10.4028/www.scientific.net/amr.399-401.2079.

Full text

Abstract:

The basic formulation and technologies of phosphating for 6063 aluminum alloys were discussed to enhance the corrosion resistance. The effect of phosphating time, pH, ZnO, H3PO4 and NaF content on corrosion resistance was investigated using Tafel polarization methods. The results show that the optimum phosphating technologies of 6063 aluminum alloys are as follows: 7 g/L ZnO, 20 mL/L 85% H3PO4, 1.2 g/L NaF, pH 3.0, temperature 45±2°C, phosphating time 7 min. After phosphating treatment the anodic and cathodic corrosion processes of 6063 alloys are suppressed greatly, and the corrosion resistan

APA, Harvard, Vancouver, ISO, and other styles

3

Lan, Wei, Jian Chun Sun, An Ruo Zhou, Hui Dong Qiu, and Ding Fei Zhang. "Study on Phosphating on the Magnesium Alloys." Materials Science Forum 546-549 (May 2007): 597–600. http://dx.doi.org/10.4028/www.scientific.net/msf.546-549.597.

Full text

Abstract:

In this paper, the solution mainly containing Zn(H2PO4)2 was used to prepare phosphating coatings on AZ31,AZ61 and AZ91 magnesium alloys. The effects of the phosphating parameters and the composition of phosphating solution on the formation of the coatings were investigated by orthogonal tests. The corrosion behaviors of the phosphating coatings were also studied and it is found that there was no hydrogen evolution in at least 1h. In the last, 60~80μm organic coatings were painted on the phosphated magnesium alloys,the organic coatings adhered to the phosphating coating, and the anti-corrosion

APA, Harvard, Vancouver, ISO, and other styles

4

Gruss, Brad. "Iron phosphating." Metal Finishing 98, no. 6 (2000): 52–56. http://dx.doi.org/10.1016/s0026-0576(00)80391-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Donofrio, John. "Zinc phosphating." Metal Finishing 98, no. 6 (2000): 57–73. http://dx.doi.org/10.1016/s0026-0576(00)80392-x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Gruss, Brad. "Iron phosphating." Metal Finishing 108, no. 11-12 (2010): 33–37. http://dx.doi.org/10.1016/s0026-0576(10)00040-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Donofrio, John. "Zinc phosphating." Metal Finishing 108, no. 11-12 (2010): 40–56. http://dx.doi.org/10.1016/s0026-0576(10)80212-0.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Gruss, Brad. "Iron phosphating." Metal Finishing 97, no. 5 (1999): 65–68. http://dx.doi.org/10.1016/s0026-0576(99)80760-0.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Donofrio, John. "Zinc phosphating." Metal Finishing 97, no. 5 (1999): 71–86. http://dx.doi.org/10.1016/s0026-0576(99)80761-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Hao, Jian Jun, Chong Rui Wang, Xin Yuan Liu, et al. "Study of Modified Properties on Electrolytic Phosphate Coatings with Nano-Al₂O₃." Advanced Materials Research 299-300 (July 2011): 616–20. http://dx.doi.org/10.4028/www.scientific.net/amr.299-300.616.

Full text

Abstract:

The properties of nano Al2O3modified electrolytic phosphating film have been studied through using the accelerated corrosion test, electrochemical testing techniques, scanning electron microscope (SEM) and X-ray diffraction (XRD) .The results show that, after adding nano- Al2O3 in electrolytic phosphating bath , morphology of phosphating film surface turned dense flake crystallization from needle crystal morphology of free-adding nano- Al2O3powder, and the value of impedance of the Al2O3incorporated phosphate coating was increased obviously.When the nano- Al2O3concentration was 15mg / L in ele

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Phosphating"

1

Darmarajan, Suresh. "Chemistry of in-situ phosphating coating /." [St. Lucia, Qld.], 2003. http://www.library.uq.edu.au/pdfserve.php?image=thesisabs/absthe18553.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Akhtar, Anisa Shera. "Surface science studies of conversion coatings on 2024-T3 aluminum alloy." Thesis, University of British Columbia, 2008. http://hdl.handle.net/2429/1713.

Full text

Abstract:

The research in this thesis aims to develop new mechanistic knowledge for coating processes at 2024-Al alloy surfaces, ultimately to aid the design of new protective coatings. Coatings formed by phosphating, chromating, and permanganating were characterized especially by scanning Auger microscopy (SAM), X-ray photoelectron spectroscopy, and scanning electron microscopy . The objective was to learn about growth (nm level) as a function of time for different coating baths, as well as a function of lateral position across the different surface microstructural regions, specifically on the μm-sized

APA, Harvard, Vancouver, ISO, and other styles

3

Wierre, Christophe. "Optimisation des traitements de surface non réactifs pour la forge à froid." Valenciennes, 1996. https://ged.uphf.fr/nuxeo/site/esupversions/e4d28904-bb12-46e0-becc-c1a11b73b6f4.

Full text

Abstract:

La compréhension des mécanismes de frottement et de grippage en forge à froid nécessite la mise en œuvre d'essais de simulation visant à caractériser objectivement les surfaces lubrifiées. À cet effet une méthodologie de caractérisation des lubrifiants solides basée sur l'exploitation d'un essai composite étirage-grippage a été développée au laboratoire d'automatique et de mécanique industrielles et humaines. Elle permet de reproduire certaines contraintes thermomécaniques locales subies par les surfaces lubrifiées au cours de la mise en forme des pièces et au cours d'actions de contact intens

APA, Harvard, Vancouver, ISO, and other styles

4

Yamaguti, Rosele Correia de Lima. "Avaliação de alternativas ao uso de níquel e cromatos no processo de fosfatização tricatiônico aplicado ao aço carbono." Universidade de São Paulo, 2012. http://www.teses.usp.br/teses/disponiveis/85/85134/tde-24102012-085907/.

Full text

Abstract:

Camadas de fosfato tricatiônico são largamente utilizadas na indústria automotiva como proteção contra corrosão e adesão de revestimentos orgânicos ao substrato de aço. A combinação do fosfato e revestimento proporciona à superfície metálica, alta durabilidade à corrosão. Porém a camada cristalina obtida com este tipo de fosfato apresenta poros entre os cristais, expondo o substrato metálico ao ambiente corrosivo, tornando importante um tratamento de passivação após fosfatização. O tratamento comercial de fosfatização tricatiônico e subsequente passivação envolvem o uso de elementos tóxicos, t

APA, Harvard, Vancouver, ISO, and other styles

5

Adjerid, Smaïl. "Contribution à l'identification des conditions optimales de sollicitation des revêtements phosphatés-lubrifiés." Valenciennes, 1995. https://ged.uphf.fr/nuxeo/site/esupversions/169e5879-2295-41fe-ad0e-9f45341fb297.

Full text

Abstract:

Les revêtements de phosphate sont encore largement utilisés dans diverses applications du secteur de la mécanique. Cependant, concernant la lubrification et notamment, le domaine de la mise en forme à froid, ces revêtements peuvent présenter des caractéristiques physico-chimiques souvent aléatoires et pas toujours fiables. En effet, les performances tribologiques des couches phosphatées dépendent d'un très grand nombre de paramètres liés à l'élaboration du revêtement lui-même ou encore à ses conditions de sollicitation. L’étude réalisée a consisté à évaluer l'incidence de certains paramètres d

APA, Harvard, Vancouver, ISO, and other styles

6

Mancin, Gleber Rodrigo. "Manejo de modos e fontes de fósforo na produção e qualidade da cana planta (Saccharum spp.)." Universidade de São Paulo, 2018. http://www.teses.usp.br/teses/disponiveis/74/74131/tde-25052018-152500/.

Full text

Abstract:

Sendo a cana-de-açúcar uma das culturas mais importantes hoje no contexto de agroindústria, sua expansão cresce de acordo com o aumento de consumo de açúcar e etanol no Brasil e no mundo. Muitas vezes, estas expansões são realizadas em área de baixa fertilidade e/ou degradadas, tendo pouca disponibilidade de fósforo. De maneira geral, os solos no Brasil apresentam baixos teores de fósforo. A cultura da cana-de-açúcar considerada semi perene, a aplicação principal de fósforo é realizada na reforma ou implantação do canavial, como fosfatagem e/ou localizado dentro do sulco do plantio. O fósforo

APA, Harvard, Vancouver, ISO, and other styles

7

Rombeaux, Philippe. "Etude de la phosphatation cristalline au zinc : caracterisation et comportement électrochimique des dépôts." Châtenay-Malabry, Ecole centrale de Paris, 1988. http://www.theses.fr/1988ECAP0070.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Hosseini, Vafa Babak. "IMPLEMENTATION OF ”MATRIX DATA CODE’’ MARKING ON GEAR KITS : Marking and reading of the marked data on the pinion and crown wheel after hardening and phosphating processes." Thesis, Högskolan i Halmstad, Maskinteknisk produktframtagning (MTEK), 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-28775.

Full text

Abstract:

This thesis has been performed in cooperation with the companyMeritorHVSABin order to implement amatrix data codes marked on gear kits for reducing potentialhuman errorwhen inputtingthe information inside thecompany's business system. Asustainablemarkingis the basis forproducttraceability to followa product'swayfrom theraw materialto finished product so that they can betracedthroughouttheir life cycle. To investigate thecurrent technology, two different marking andreadingmethods were tested: a laser and dot peen method. It has been found that the dot peen method was more suitable for Meritorto

APA, Harvard, Vancouver, ISO, and other styles

9

Brzuchańská, Anna. "Optimalizace metod hodnocení fosfátovacích lázní." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2008. http://www.nusl.cz/ntk/nusl-216366.

Full text

Abstract:

This work deals with phosphating technology of steel. In theoretical part are summarized facts about conventional phosphating process, including steel surfaces pretreatment. In the next chapter the latest contemporary technology of phosphating is discussed, i.e. electrolytic phosphating. This chapter contains principles and characteristics of this technique. Than follow comparisons of electrolytic phosphating and conventional process, concerning economical and ecological aspects. In experimental part is firstly stated nowaday situation of process analyses of phosphating bath for electrolytic p

APA, Harvard, Vancouver, ISO, and other styles

10

JAZBINSEK, LUIZ A. R. "Investigação de tratamentos alternativos de fosfatização para eliminação do níquel e cromo hexavalente." reponame:Repositório Institucional do IPEN, 2014. http://repositorio.ipen.br:8080/xmlui/handle/123456789/23490.

Full text

Abstract:

Submitted by Maria Eneide de Souza Araujo (mearaujo@ipen.br) on 2015-02-20T18:11:07Z No. of bitstreams: 0<br>Made available in DSpace on 2015-02-20T18:11:07Z (GMT). No. of bitstreams: 0<br>Dissertação (Mestrado em Tecnologia Nuclear)<br>IPEN/D<br>Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Phosphating"

1

Freeman, D. B. Phosphating and metal pre-treatment: A guide to modern processes and practice. Woodhead-Faulkner in association with Pyrene Chemical Services Ltd., 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Freeman, D. B. Phosphating and metal pre-treatment: A guide to modern processes and practice. Industrial Press, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

D, Miller G., and Risk Reduction Engineering Laboratory (U.S.), eds. Evaluation of ultrafiltration to recover aqueous iron phosphating/degreasing bath: Project summary. U.S. Environmental Protection Agency, Risk Reduction Engineering Laboratory, 1993.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Zhang, Patrick. Phosphatic clay bibliography. Florida Institute of Phosphate Research, 1995.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Knödler, Frank. Präparative und spektroskopische Untersuchungen an Chloroantimon(V)-phosphaten [Chloroantimon-phosphaten]. [s.n.], 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Smith, C. W. Well point dewatering of phosphatic clays. U.S. Dept. of the Interior, Bureau of Mines, 1989.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

1936-, Schultz J. J., ed. Phosphate fertilizers and the environment: Proceedings of an international workshop. International Fertilizer Development Center, 1992.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Schultz, J. J. Phosphate fertilizers and the environment: A discussion paper. International Fertilizer Development Center, 1993.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

National Fertilizer Development Centre (Pakistan), ed. Agronomic, marketing, and economic aspects of triple superphosphate (TSP) as compared to other phosphatic fertilizers. National Fertilizer Development Centre, Planning and Development Division, Govt. of Pakistan, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Kulaif, Yara. A nova configuração da indústria de fertilizantes fosfatados no Brasil. Ministério da Ciência e Tecnologia, Centro de Tecnologia Mineral, 1999.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Phosphating"

1

Gooch, Jan W. "Phosphating." In Encyclopedic Dictionary of Polymers. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_8653.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Panossian, Zehbour. "Phosphating of Steel for Cold Forming Processes." In Encyclopedia of Tribology. Springer US, 2013. http://dx.doi.org/10.1007/978-0-387-92897-5_1187.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Lan, Wei, Jian Chun Sun, An Ruo Zhou, Hui Dong Qiu, and Ding Fei Zhang. "Study on Phosphating on the Magnesium Alloys." In Materials Science Forum. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-432-4.597.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Gou, Weijie, Lihong Wang, and Zhaokai An. "Design of Temperature Control System for BIW Phosphating Process." In Advances in Intelligent Systems and Computing. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-15235-2_128.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Wang, Xiu Chun, Mu Sen Li, Xi Qing Pan, Xiu Xin Wang, and Xiao Jun Li. "Processing of Environment Protective Phosphating and its Coating Properties." In Key Engineering Materials. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-456-1.1846.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Ezekiel, S. N., A. A. Ayoola, B. M. Durodola, O. Odunlami, and O. A. Oyeniyi. "Phosphating Technique: A Reliable Approach for Corrosion Resistance of A36 Mild Steel." In Green Energy and Technology. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-95820-6_16.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Bährle-Rapp, Marina. "Phosphatide." In Springer Lexikon Kosmetik und Körperpflege. Springer Berlin Heidelberg, 2007. http://dx.doi.org/10.1007/978-3-540-71095-0_7926.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Tarka, Konrad, Annabelle Jaako, Dan Persson, Håkan Mattsson, and Lars-Gunnar Johansson. "Corrosion Propagation Under Paint Films on Galvanized Steel: A Comparison of Phosphating and Thin Film Corrosion Pretreatment Technologies." In Sustainable Automotive Technologies 2014. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-17999-5_15.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Akhtar, A. S., D. Susac, K. C. Wong, P. C. Wong, and K. A. R. Mitchell. "Surface Science Studies of the Effect of Mn²⁺ on Zinc Phosphating of 2024-T3 Al Alloy." In Materials Science Forum. Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-408-1.753.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Saraswati, Pratul Kumar, and M. S. Srinivasan. "Phosphatic Microfossils." In Micropaleontology. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-14574-7_8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Phosphating"

1

Schubach, Peter, and Horst Gehmecker. "Pre-Treatment Processes for Automotive Applications in Europe." In CORROSION 1995. NACE International, 1995. https://doi.org/10.5006/c1995-95389.

Full text

Abstract:

Abstract Pre-treatment processes for automotive applications in Europe are optimised firstly due to the increasing use of aluminum and coated steel for car bodies and parts and secondly due to environmental issues. Prephosphated coated steel, mainly electrogalvanised steel with a trication zinc phosphate layer applied in the steel mill is used by many car manufacturers. Several R&D projects are under way to coat aluminum sheet with inorganic or organic layers to enhance forming, welding and joining properties. Environmental aspects initiated the development of cleaners with biodegradable a

APA, Harvard, Vancouver, ISO, and other styles

2

Yang, Xiao, Yan Liu, Xuefeng Li, et al. "Study on characterization technology of metal phosphating layer." In 10th International Conference on Mechanical Engineering, Materials, and Automation Technology (MMEAT 2024), edited by Yunhui Liu and Zili Li. SPIE, 2024. http://dx.doi.org/10.1117/12.3046956.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Moraes, Juliana dos Anjos, Guilherme Adams, Alvaro Meneguzzi, and Jane Zoppas. "PERFORMANCE COMPARISON OF PRE-COATING FOR REPLACEMENT OF PHOSPHATING." In 66º Congresso Anual da ABM. Editora Blucher, 2011. https://doi.org/10.5151/2594-5327-18021.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Górecki, George. "Iron Phosphate Coatings - Morpholgy and Corrosion Resistance." In CORROSION 1991. NACE International, 1991. https://doi.org/10.5006/c1991-91381.

Full text

Abstract:

Abstract The corrosion resistance of three types of iron phosphate coatings on cold-rolled steel was examined. The alkali metal phosphating baths studied were three of the types most commonly encountered in industrial finishing operations. Coating composition was varied by employing different accelerators in the phosphating bath. The components of each of the phosphate coatings were deduced by stripping test panels in a solution of 6 M HCl inhibited by Sb2O3. The stripping solution was then analyzed for the concentrations of ferrous iron, ferric iron, and phosphate. In the second part of the s

APA, Harvard, Vancouver, ISO, and other styles

5

Gehmecker, Horst. "Phosphating and Chrome-Free Passivation of Multi-Metal Car Bodies." In CORROSION 1991. NACE International, 1991. https://doi.org/10.5006/c1991-91380.

Full text

Abstract:

Abstract New processes in chemical surface treatment have been developed to meet two major requirements: improved corrosion resistance and paint adhesion on multi-metal assemblies andreduced environmental impact by eliminating hazardous constituents and by reducing the amount of effluents and sludge. The paper describes the present state of the art.

APA, Harvard, Vancouver, ISO, and other styles

6

Kwiatkowski, L., and M. Radzikowski. "Phosphating of Hot - Dipped Zinc - Aluminum Coated Steel: Formation and Properties of the Coatings." In CORROSION 1995. NACE International, 1995. https://doi.org/10.5006/c1995-95387.

Full text

Abstract:

Abstract 55%Al-Zn and 5%Al-Zn were phosphated in comparison with electrolytic zinc coatings. Potential measurements during phosphating were carried out in order to find the interpretation of differences in the crystal size. Impedance measurements were performed for the assessment of the corrosion properties of the phosphate coatings. It was found that there is no differences between coatings formed from the high or low- zinc baths. The best results were obtained for the phosphated 55%Al-Zn, however one may find also suitable treatment for 5%Al-Zn surface. From the X-ray diffraction data de- an

APA, Harvard, Vancouver, ISO, and other styles

7

Leroy, V., and J. P. Servais. "Influence of Steel Surface Chemistry in Finishing Treatments Used in Automotive Industry." In CORROSION 1985. NACE International, 1985. https://doi.org/10.5006/c1985-85387.

Full text

Abstract:

Abstract Car body makers are paying more and more attention on the problem of corrosion resistance of phosphated and painted parts. It is very evident that the corrosion resistance depends on many parameters such as intrinsic properties of each sub-coat, their mutual compatibility but also on the surface properties of the base steel sheet. The present work is just intended to define more precisely what is the surface chemistry of steel sheets processed according to different production routes and to study how surface chemistry may affect the initial stages of the finishing treatment, i.e. -deg

APA, Harvard, Vancouver, ISO, and other styles

8

Servais, J. P., B. Schmitz, and V. Leroy. "Thermal and Chemical Stability of Phosphate Layers on Cold-Rolled Steel and Coated Products During Carbody Corrosion." In CORROSION 1988. NACE International, 1988. https://doi.org/10.5006/c1988-88041.

Full text

Abstract:

Abstract Zinc phosphating is widely used in industrial coating applications as surface pretreatments for the painting of metals. In car industry, this conversion coating process is applied as well on coated products (zinc electrocoated or hot dip galvanized steel) as on bare steel. It results in the formation of a densely packed crystals layer of phosphophyllite (mixed Zn Fe phosphate) on bare steel and of hopeite (Zn phosphate) on coated products. The phosphate layer formed on a carbody undergoes different aggressions: thermal aggressions during paint baking and chemical aggressions during ca

APA, Harvard, Vancouver, ISO, and other styles

9

Gunkel, R. W., and J. P. Moran. "Corrosion Performance of Mechanically Fastened Aluminum/Steel Joints: Influence of Fastener Type and Aluminum Alloy." In CORROSION 1995. NACE International, 1995. https://doi.org/10.5006/c1995-95377.

Full text

Abstract:

Abstract This paper discusses the corrosion test results for aluminum to steel lap-shear joints fabricated from three aluminum alloys using four different mechanical fasteners. The evaluations included exposure to alternate immersion (AI) and 100% relative humidity (RH) corrosion tests after phosphating and applying a 25 μm E-Coat (i.e., electrolytic coating) to the completed assembly. Lap-shear test results showed that specimens fabricated using self-piercing rivets and solid rivets exhibited strengthening after 30-60 days exposure to AI or RH testing, which was subsequently followed by a dec

APA, Harvard, Vancouver, ISO, and other styles

10

Balasubramanian, Jayanthan, Vinay Kumar, Muthiah Kirubakaran, and Rahul Lalwani. "A Study on Automotive Sheetmetal Surface Pretreatment: Liquid Activation and Low Temperature Phosphating." In International Conference on Automotive Materials and Manufacturing AMM 2023. SAE International, 2023. http://dx.doi.org/10.4271/2023-28-1324.

Full text

Abstract:

<div class="section abstract"><div class="htmlview paragraph">Phosphating is the most preferred surface treatment process used for auto body sheet panel before painting due to its low-cost, easy production process, good corrosion resistance, and excellent adhesion with subsequent paint layer. There are different phosphating processes used for ferrous metal like zinc phosphating, iron phosphating, di-cationic &amp; tri-cationic phosphating, etc. Among these phosphate coatings, the best corrosion resistance and surface adhesion are achieved by tri-cationic phosphate coatings (zin

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Phosphating"

1

Moody, T. E., S. W. Petersen, E. G. Torne, J. Vicakova, and J. F. Higginbotham. Laboratory Scale Stabilization of N-Springs Groundwater Strontium-9O Using Phosphatic Materials. Defense Technical Information Center, 1996. http://dx.doi.org/10.21236/ada349254.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Gadd, M. G., N. Bingham-Koslowski, D. Petts, and M. Polivchuk. Phosphatic, manganiferous ironstones of the Rapid Creek Formation (Northwest Territories), a preliminary study. Natural Resources Canada/CMSS/Information Management, 2023. http://dx.doi.org/10.4095/332073.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Effects on ground-water quality of seepage from a phosphatic clayey waste settling pond, north-central Florida. US Geological Survey, 1986. http://dx.doi.org/10.3133/wri864107.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!