Relevant bibliographies by topics / Photovoltaic (PV) array / Dissertations / Theses
To see the other types of publications on this topic, follow the link: Photovoltaic (PV) array.

Dissertations / Theses on the topic 'Photovoltaic (PV) array'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 15 dissertations / theses for your research on the topic 'Photovoltaic (PV) array.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Trapani, Kim. "FLEXIBLE FLOATING THIN FILM PHOTOVOLTAIC (PV) ARRAY CONCEPT FOR MARINE AND LACUSTRINE ENVIRONMENTS." Thesis, Laurentian University of Sudbury, 2014. https://zone.biblio.laurentian.ca/dspace/handle/10219/2199.

Full text
Abstract:
The focus of the research is on the development of the concept of floating flexible thin film arrays for renewable electricity generation, in marine and lacustrine application areas. This research was motivated by reliability issues from wave energy converters which are prone to large loads due to the environment which they are exposed in; a flexible system would not need to withstand these loads but simply yield to them. The solid state power take off is an advantage of photovoltaic (PV) technology which removes failure risks associated with mechanical machinery, and also potential environmen
APA, Harvard, Vancouver, ISO, and other styles
2

Umana, Aniemi. "Module-level autonomous settingless protection and monitoring for standalone and grid-connected photovoltaic array systems using quadratic integration modeling." Diss., Georgia Institute of Technology, 2015. http://hdl.handle.net/1853/54441.

Full text
Abstract:
This research applies a recently developed dynamic state-estimation based protection scheme, the settingless protection, to the photovoltaic (PV) industry for the first time. At this time, the proposed protection algorithm has been implemented on traditional protection zones for individual power system devices, but this research extends this protection to a microgrid, specifically, a system of PV network composed of several PV modules. Several illustrative examples on various anomalies such as high impedance faults and shorted-out PV modules have been provided to demonstrate the effectiveness
APA, Harvard, Vancouver, ISO, and other styles
3

Chen, Penghao. "Improvement of the Operating Efficiency and Initial Costs of a Utility-Scale Photovoltaic Array through Voltage Clamping." University of Toledo / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=toledo1333654173.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Paul, Biddyut, and s3115524@student rmit edu au. "Direct-Coupling of the Photovoltaic Array and PEM Electrolyser in Solar-Hydrogen Systems for Remote Area Power Supply." RMIT University. Aerospace, Mechanical and Manufacturing Engineering, 2009. http://adt.lib.rmit.edu.au/adt/public/adt-VIT20090624.141048.

Full text
Abstract:
Renewable energy-hydrogen systems for remote area power supply (RAPS) constitute an early niche market for sustainable hydrogen energy. The primary objective of this research has been to investigate the possibility of direct coupling of a PV array to a proton exchange membrane (PEM) electrolyser by appropriate matching of the current-voltage characteristics of both the components. The degree to which optimal matching can be achieved by direct coupling has been studied both theoretically and experimentally. A procedure for matching the maximum power point output of a PV array with the PEM
APA, Harvard, Vancouver, ISO, and other styles
5

Morris, Claude. "Grid-connected transformerless single-phase photovoltaic inverters: an evaluation on DC current injection and PV array voltage fluctuation." Thesis, Morris, Claude (2009) Grid-connected transformerless single-phase photovoltaic inverters: an evaluation on DC current injection and PV array voltage fluctuation. Other thesis, Murdoch University, 2009. https://researchrepository.murdoch.edu.au/id/eprint/3245/.

Full text
Abstract:
A number of political, environmental and technical factors have resulted in the increase of implementation of renewable technology including grid connected photovoltaic inverters. As a result, new topologies for grid connected inverters providing higher efficiencies and lower manufacturing costs have been developed. In particular, designs utilising transformerless topologies have steadily increased. While there are clear associated advantages of implementing these new transformerless topologies, new potential issues such as DC current injection and capacitive leakage currents are introduced. P
APA, Harvard, Vancouver, ISO, and other styles
6

Elwood, Teri, Whit Bennett, Teh Lai, and Kelly Simmons-Potter. "In-situ comparison of thermal measurement technologies for interpretation of PV module temperature de-rating effects." SPIE-INT SOC OPTICAL ENGINEERING, 2016. http://hdl.handle.net/10150/622582.

Full text
Abstract:
It is well known that the efficiency of a photovoltaic (PV) module is strongly impacted by its temperature such that higher temperatures lead to lower energy conversion efficiencies. An accurate measurement of the temperature de-rating effect, therefore, is vital to the correct interpretation of PV module performance under varied environmental conditions. The current work investigates and compares methods for performing measurements of module temperature both in the lab and in field-test environments. A comparison of several temperature measurement devices was made in order to establish the id
APA, Harvard, Vancouver, ISO, and other styles
7

Sandberg, Alexander. "A photovoltaic system performance Evaluation Software : For evaluation of ten unique PV-system configurations in the middle of Sweden." Thesis, Mälardalens högskola, Akademin för ekonomi, samhälle och teknik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-26606.

Full text
Abstract:
This thesis contains the development of a software capable of evaluating the performance of ten unique photovoltaic (PV) systems located 10 kilometers outside of Västerås, Sweden. The ten systems have different configurations according to this list: Dual-axis tracking Single-axis tracking with 30°tilt Ground mounted, free-standing with 19° tilt Ground mounted, free-standing with 41° tilt Roof mounted with 19°tilt   Each of the above configurations exist with and without installed power optimizers adding up to a total of ten unique systems. The development goal for the evaluation software is t
APA, Harvard, Vancouver, ISO, and other styles
8

Samadi, Afshin. "Large Scale Solar Power Integration in Distribution Grids : PV Modelling, Voltage Support and Aggregation Studies." Doctoral thesis, KTH, Elektriska energisystem, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-154602.

Full text
Abstract:
Long term supporting schemes for photovoltaic (PV) system installation have led to accommodating large numbers of PV systems within load pockets in distribution grids. High penetrations of PV systems can cause new technical challenges, such as voltage rise due to reverse power flow during light load and high PV generation conditions. Therefore, new strategies are required to address the associated challenges. Moreover, due to these changes in distribution grids, a different response behavior of the distribution grid on the transmission side can be expected. Hence, a new equivalent model of dis
APA, Harvard, Vancouver, ISO, and other styles
9

AHMAD, JAWAD. "A Unified Approach to Maximum Power Point Tracking and I-V Curve Determination of Photovoltaic Arrays from Real-time Measurements." Doctoral thesis, Politecnico di Torino, 2017. http://hdl.handle.net/11583/2674886.

Full text
Abstract:
In recent years we have seen a considerable increase in the installed capacity of Photovoltaic (PV) power generating plants worldwide. This increase is primarily attributed to the decrease in the cost of installation and the awareness towards the sustainable power generation. However, the efficiency of the PV modules is still low. The Current vs. Voltage (I-V) characteristics of the PV generators is non-linear and changes with irradiance and temperature. For optimal utilization of PV sources, Maximum Power Point Trackers (MPPTs) are used. When the array is under uniform illumination, there is
APA, Harvard, Vancouver, ISO, and other styles
10

"Topology Reconfiguration To Improve The Photovoltaic (PV) Array Performance." Master's thesis, 2011. http://hdl.handle.net/2286/R.I.14403.

Full text
Abstract:
abstract: Great advances have been made in the construction of photovoltaic (PV) cells and modules, but array level management remains much the same as it has been in previous decades. Conventionally, the PV array is connected in a fixed topology which is not always appropriate in the presence of faults in the array, and varying weather conditions. With the introduction of smarter inverters and solar modules, the data obtained from the photovoltaic array can be used to dynamically modify the array topology and improve the array power output. This is beneficial especially when module mismatches
APA, Harvard, Vancouver, ISO, and other styles
11

Li, Chen-Cheng, and 李振誠. "A Study of the Maximum Photovoltaic Power Tracker for PV Array." Thesis, 2004. http://ndltd.ncl.edu.tw/handle/73086772297880251687.

Full text
Abstract:
碩士<br>大同大學<br>電機工程學系(所)<br>92<br>The purpose of this thesis is to research the maximum photovoltaic power tracker. In order to react to the illumination condition sharply changed. The tracker can rapidly track the maximum photovoltaic power point. Through precisely photo-electrical power conversion, so the maximum photo-electrical power output in whatever conditions of illumination can be achieved. This tracking rule is using gradient method as a base to capture PV array’s terminal voltage and current. According to the intrinsic characteristics of the curve of PV array’s power-voltage, take
APA, Harvard, Vancouver, ISO, and other styles
12

"26+ Year Old Photovoltaic Power Plant: Degradation and Reliability Evaluation of Crystalline Silicon Modules - North Array." Master's thesis, 2013. http://hdl.handle.net/2286/R.I.18002.

Full text
Abstract:
abstract: The object of this study was a 26 year old residential Photovoltaic (PV) monocrystalline silicon (c-Si) power plant, called Solar One, built by developer John F. Long in Phoenix, Arizona (a hot-dry field condition). The task for Arizona State University Photovoltaic Reliability Laboratory (ASU-PRL) graduate students was to evaluate the power plant through visual inspection, electrical performance, and infrared thermography. The purpose of this evaluation was to measure and understand the extent of degradation to the system along with the identification of the failure modes in this ho
APA, Harvard, Vancouver, ISO, and other styles
13

Jansen, van Rensburg Neil. "Technology development of a maximum power point tracker for regenerative fuel cells." Thesis, 2015. http://hdl.handle.net/10352/317.

Full text
Abstract:
M. Tech. (Department of Electronic Engineering, Faculty of Engineering and Technology) --Vaal University of Technology|<br>Global warming is of increasing concern due to several greenhouse gases. The combustion of fossil fuels is the major contributor to the greenhouse effect. To minimalise this effect, alternative energy sources have to be considered. Alternative energy sources should not only be environmentally friendly, but also renewable and/or sustainable. Two such alternative energy sources are hydrogen and solar energy. The regenerative fuel cell, commonly known as a hydrogen generator
APA, Harvard, Vancouver, ISO, and other styles
14

Chen, Yuan-Chen, and 振芫禎. "A STUDY OF THE MAXIMUM PHOTOVOLTAIC POWER TRACKER FOR PV ARRAYS." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/35634929795224459803.

Full text
Abstract:
碩士<br>大同大學<br>電機工程學系(所)<br>96<br>The purpose of this thesis is to develop the maximum power tracker of solar cell. In order to react to the illumination condition changed, the tracker can track the maximum power point of solar cell. It can also track the maximum power point in the partial shade of solar cell. The entire tracing principle is taked the impedance matching as the foundation idea, and coordinate perturbation observation method skill. According to the characteristics of the solar cell, this power tracker can get the output voltage and current of solar cell, while detecting the outpu
APA, Harvard, Vancouver, ISO, and other styles
15

Syu, Hao-Ting, and 徐浩霆. "Design and Implementation of the Maximum Photovoltaic Power Tracker for PV Arrays." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/65912365482572554469.

Full text
Abstract:
碩士<br>遠東科技大學<br>電機工程研究所<br>100<br>This thesis presents the design and implementation of maximum power tracking controller for photovoltaic modules via the proposed DC-DC converter as the maximum power tracker. External environment factors are frequently an effect source of the power output in photovoltaic modules, such as sun exposure, temperature and illumination and so on. Since the sun all day are not maintained at the same illumination, the photovoltaic modules will be also affected the efficiency of temperature rise. Therefore, in order to obtain the maximum power output of photovoltaic m
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the bibliographies on the topic 'Photovoltaic (PV) array' for other source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography