To see the other types of publications on this topic, follow the link: Photovoltaic (PV) system.
Dissertations / Theses on the topic 'Photovoltaic (PV) system'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 50 dissertations / theses for your research on the topic 'Photovoltaic (PV) system.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
1
Franklin, Edward A. "Mounting Your Solar Photovoltaic (PV) System." College of Agriculture, University of Arizona (Tucson, AZ), 2017. http://hdl.handle.net/10150/625443.
Full text
2
Rakotomananandro, Falinirina F. "Study of Photovoltaic System." The Ohio State University, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=osu1306285848.
Full text
3
Wu, Yuechen, Shelby Vorndran, Pelaez Silvana Ayala, and Raymond K. Kostuk. "Three junction holographic micro-scale PV system." SPIE-INT SOC OPTICAL ENGINEERING, 2016. http://hdl.handle.net/10150/622714.
Full textAbstract:
In this work a spectrum splitting micro-scale concentrating PV system is evaluated to increase the conversion efficiency of flat panel PV systems. In this approach, the dispersed spectrum splitting concentration systems is scaled down to a small size and structured in an array. The spectrum splitting configuration allows the use of separate single bandgap PV cells that increase spectral overlap with the incident solar spectrum. This results in an overall increase in the spectral conversion efficiency of the resulting system. In addition other benefits of the micro-scale PV system are retained such reduced PV cell material requirements, more versatile interconnect configurations, and lower heat rejection requirements that can lead to a lower cost system. The system proposed in this work consists of two cascaded off-axis holograms in combination with a micro lens array, and three types of PV cells. An aspherical lens design is made to minimize the dispersion so that higher concentration ratios can be achieved for a three-junction system. An analysis methodology is also developed to determine the optical efficiency of the resulting system, the characteristics of the dispersed spectrum, and the overall system conversion efficiency for a combination of three types of PV cells.
4
Carr, Anna J. "A detailed performance comparison of PV modules of different technologies and the implications for PV system design methods /." Access via Murdoch University Digital Theses Project, 2005. http://wwwlib.murdoch.edu.au/adt/browse/view/adt-MU20050830.94641.
Full text
5
Asgharzadeh, Shishavan Amir. "Bifacial photovoltaic (PV) system performance modeling utilizing ray tracing." Diss., University of Iowa, 2019. https://ir.uiowa.edu/etd/6911.
Full textAbstract:
Bifacial photovoltaics (PV) is a promising technology which allows solar cells to absorb light and generate power from both front and rear sides of the cells. Bifacial PV systems generate more power per area compared to their monofacial counterparts because of the additional energy generated from the backside. However, modeling the performance of bifacial PV systems is more challenging than monofacial systems and industry requires novel and accurate modeling tools to understand and estimate the benefit of this technology. In this dissertation, a rigorous model utilizing a backward raytracing software tool called RADIANCE is developed, which allows accurate irradiance modeling of the front and rear sides of the bifacial PV systems. The developed raytracing model is benchmarked relative to other major bifacial irradiance modeling tools based on view-factor model. The accuracy of the irradiance models is tested by comparing with the measured irradiance data from the sensors installed on various bifacial PV systems. Our results show that the raytracing model is more accurate in modeling backside irradiance compared to the other irradiance models. However, this higher accuracy comes at a cost of higher computational time and resources. The raytracing model is also used to understand the impact of different installation parameters such as tilt angle, height above the ground, albedo and size of the south-facing fixed-tilt bifacial PV systems. Results suggest bifacial gain has a linear relationship with albedo, and an increasing saturating relationship with module height. However, the impact of tilt angle is much more complicated and depends on other installation parameters. It is shown that larger bifacial systems may have up to 20º higher optimum tilt angle compared to small-scale systems. We also used the raytracing model to simulate and compare the performance of two common configurations for bifacial PV systems: optimally tilted facing south/north (BiS/N) and vertically installed facing east/west (BiE/W). Our results suggest that in the case of no nearby obstruction, BiS/N performs better than BiE/W for most of the studied locations. However, the results show that for high latitude locations such as Alaska, having a small nearby obstruction may result in having better yield for vertical east-facing system than south-facing tilted system. RADIANCE modeling tool is also used in combination of a custom tandem device model to simulate the performance of tandem bifacial PV systems. Modeling results suggest that while the energy gain from bifacial tandem systems is not high, range of suitable top-cell bandgaps is greatly broadened. Therefore, more options for top-cell absorber of tandem cell are introduced.
6
Kristofersson, Filip, and Sara Elfberg. "Maximizing Solar Energy Production for Västra Stenhagenskolan : Designing an Optimal PV System." Thesis, Uppsala universitet, Institutionen för teknikvetenskaper, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-384723.
Full textAbstract:
Skolfastigheter is a municipality owned real estate company that manages most of the buildings used for lower education in Uppsala. The company is working in line with the environmental goals of the municipality by installing photovoltaic systems in schools and other educational buildings. Skolfastigheter are planning to install a photovoltaic system in a school in Stenhagen. The purpose of this study is to optimally design the proposed system. The system will be maximized, which in this study entails that the modules will be placed on every part of the roof where the insolation is sufficient. The system will also be grid connected. The design process includes finding an optimal placement of the modules, matching them with a suitable inverter bank and evaluating the potential of a battery storage. Economic aspects such as taxes, subsidies and electricity prices are taken into account when the system is simulated and analyzed. A sensitivity analysis is carried out to evaluate how the capacity of a battery bank affects the self-consumption, self-sufficiency and cost of the system. It is concluded that the optimal system has a total peak power of almost 600 kW and a net present value of 826 TSEK, meaning that it would be a profitable investment. A battery bank is excluded from the optimal design, since increasing the capacity of the bank steadily decreased the net present value and only marginally increased the self-consumption and self-sufficiency of the system.
7
Raza, Khalil. "Experimental Assessment of Photovoltaic Irrigation System." Wright State University / OhioLINK, 2014. http://rave.ohiolink.edu/etdc/view?acc_num=wright1411072971.
Full text
8
Makki, Adham. "Innovative heat pipe-based photovoltaic/thermoelectric (PV/TEG) generation system." Thesis, University of Nottingham, 2017. http://eprints.nottingham.ac.uk/43330/.
Full textAbstract:
PV systems in practice experience excessive thermal energy dissipation that is inseparable from the photo-electric conversion process. The temperature of PV cells under continuous illumination can approach 40°C above ambient, causing a drop in the electrical performance of about 30%. The significance of elevated temperature on PV cells inspired various thermal management techniques to improve the operating temperature of the cells and hence their conversion efficiency. Hybrid PV/Thermal (PV/T) collectors that can supply both electrical and thermal energy are attractive twofold solution, being able to cool the PV cells and thus improving the electrical power output as well as collecting the thermal energy by-product for practical utilization. The challenges present on the performance of PV systems due to elevated operating temperature is considered the research problem within this work. In this research, an integrated hybrid heat pipe-based PV/Thermoelectric (PV/TEG) collector is proposed and investigated theoretically and experimentally. The hybrid collector considers modular integration of a PV absorber rated at 170W with surface area of 1.3 m2 serving as power generator as well as thermal absorber. Five heat pipes serving as the heat transport mediums were attached to the rear of the module to extract excessive heat accumulating on the PV cells. The extracted heat is transferred via boiling-condensation cycle within the heat pipe to a bank of TEG modules consisting of five 40 mm x 40 mm modules, each attached to the condenser section of each heat pipe. In principle, the incorporation of heat pipe-TEG thermal waste recovery assembly allow further power generation adopting the Seebeck phenomena of Thermoelectric modules. A theoretical numerical analysis of the collector proposed is conducted through derivation of differential equations for the energy exchange within the system components based on energy balance concepts while applying explicit finite difference numerical approach for solutions. The models developed are integrated into MATLAB/SIMULINK environment to assess the cooling capability of the integrated collector as well as the addition power generation through thermal waste heat recovery. The practical performance of the collector proposed is determined experimentally allowing for validation of the simulation model, hence, a testing rig is constructed based on the system requirements and operating principles. Reduction in the PV cell temperature of about 8°C, which account for about 16% reduction in the PV cell temperature response compared to a conventional PV module under identical conditions is attained. In terms of the power output available from the PV cells, enhanced power performance of additional 5.8W is observed, contributing to an increase of 4% when compared with a PV module. The overall energy conversion efficiency of the integrated collector was observed to be steady at about 11% compared to that of the conventional PV module (9.5%) even at high ambient temperature and low wind speeds. Parametric analysis to assess the performance enhancements associated to the number of heat pipes attached to the PV module is conducted. Increasing the number of heat pipes attached to 15 pipes permits improved thermal management of the PV cells realised by further 7.5% reduction in the PV module temperature in addition to electrical output power improvement of 5%.
9
Lopez, Ramirez Izar. "Operating correction factor of PV system : Effects of temperature, angle of incidence and invertor in PV system performance." Thesis, Högskolan i Gävle, Energisystem, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-23671.
Full textAbstract:
In this project, the correction factor of different solar panels of the laboratory of the University of Gävle, located in Sweden, is going to evaluated. The solar modules’working conditions are different from the ones used to test them in the laboratory. In the laboratory. the output energy of the modules is less than in working conditions,and therefore a correction factor is going to be calculated from the data collected, inorder to describe the factors that affect the performance of the solar modules.Also, the obtained correction factor validity for different PV systems it is going to be examined, determining which system has a better correction factor and the energy losses due to temperature, angle of incidence and micro invertor.
10
Manhal, Ali, and Ali Tammam M. "Solar Tent : A Photovoltaic Generator Model for a Flexible Fabric with Inbuilt Cells." Thesis, Högskolan Dalarna, Energiteknik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:du-30552.
Full textAbstract:
Natural disasters and conflicts in many different parts of the world force thousands of people to get displaced from their homes and live in refugee camps temporarily or permanently. For refugee families, lack of energy access has great impact on their lives. Tarpon Solar Company has developed a solar tent which is a combination of laminated cloth and flexible solar cells. In addition to producing renewable electricity, it can create a comfortable outdoor shelter from sun, rain and wind. The aims of this study were to define and size the solar system of the tent in both AC and DC systems and optimize the tent to work in different locations around the world. Besides designing a monitoring system for the solar tent to evaluate the performance. In addition, defining the social aspect and the consumer behavior for a better solar tent future design. As a case study, Tarpon AC solar tent in Glava, Sweden has been installed to cover the basic needs of the tent users. To understand the solar tent performance in different weather zones, 4 different locations were suggested. A monitor system was designed to monitor the tent solar system performance. The simulation software PVsyst was used to size the PV system in the different locations with different solar data. The PVsyst simulation results showed that the current Tarpon solar tent with 32 photovoltaic modules is extremely oversized to cover the basic needs loads (Lighting, mobile charging and ventilation) in the emergency cases. The current Tarpon solar tent has a standard number of photovoltaic modules integrated in the tent fabric while the photovoltaic modules number should vary from one location to another according to the weather data and solar irradiation. In this case the current Tarpon solar system used in Glava, Sweden can be optimized by decreasing the number of photovoltaic modules to only 6 photovoltaic modules instead of 32 modules. The study also shows that the features of the off-grid system components (battery and charge controller) are different from one location to another according to the criteria of selection. This study concludes that for the temporary short-term emergency use of the tent where only basic needs loads are needed, DC system is better than AC system in terms of energy efficiency, system size and cost in the different proposed locations. While AC system is better when using the tent for prolonged time in terms of user flexibility and ability to extend the system. Understanding the consumer behavior and the goal of the tent whether to be used for an emergency short term shelter or a permanent shelter for a prolonged time are important factors for a better solar tent design.
11
Mansouri, Seyed Akbar. "Circuit Topology Study of Grid-Connected Photovoltaic System." The Ohio State University, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=osu1308328627.
Full text
12
Qureshi, Yasir Karim. "Upgrade of PV Lab and Implementation of Automatic Measurement System : Photovoltaic Monitoring System." Thesis, Mälardalens högskola, Akademin för innovation, design och teknik, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-14983.
Full textAbstract:
The report is focused on the implementation of a data acquisition system that will be used for measuring different parameters which are needed in solar panel behavior analysis. To accomplish the DAQ system a DAQ board has been designed and implemented. This DAQ board acquires measured climatic parameters that affect the PV module behavior and voltage and current of a PV module. The DAQ board may take measurements of multiple analog and digital signals that come from various sensors including solar radiation, temperature, wind sensors and other measurement devices. The DAQ board may also output analog signals for controlling other devices. The DAQ board is the basic part of the DAQ system and several of them can be connected via a single communication bus (RS485). A unique slave ID can be assigned to each DAQ board on the communication bus, which allows the control of all boards via a GUI application installed on a master computer. Therefore, the DAQ system can be used for monitoring a PV module installation as well as logging the measured data in a data storage server. This report outlines the details of the DAQ system design which are helpful in utilizing or upgrading this system. These details also include programming of DAQ board and implementation of MODBUS communication protocol within the DAQ system.
13
Perez, de Larraya Espinosa Mikel. "Photovoltaic Power Plant Aging." Thesis, Högskolan i Gävle, Avdelningen för byggnadsteknik, energisystem och miljövetenskap, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-33252.
Full textAbstract:
One of the most pressing problems nowadays is climate change and global warming. As it name indicates, it is a problem that concerns the whole earth. There is no doubt that the main cause for this to happen is human, and very related to non-renewable carbon-based energy resources. However, technology has evolved, and some alternatives have appeared in the energy conversion sector. Nevertheless, they are relatively young yet. Since the growth in renewable energies technologies wind power and PV are the ones that have taken the lead. Wind power is a relatively mature technology and even if it still has challenges to overcome the horizon is clear. However, in the PV case the technology is more recent. Even if it is true that PV modules have been used in space applications for more than 60 years, large scale production has not begun until last 10 years. This leaves the uncertainty of how will PV plants and modules age. The author will try to analyse the aging of a specific 63 kWp PV plant located in the roof of a building in Gävle, monitoring production and ambient condition data, to estimate the degradation and the new nominal power of the plant. It has been found out that the degradation of the system is not considerable. PV modules and solar inverters were studied, and even if there are more elements in the system, those are the principal ones. PV modules suffered a degradation of less than 5%, while solar inverters’ efficiency dropped from 95,4% to around 93%.
14
Makhomo, Selbourne Rapoone. "Remote monitoring and evaluation of a photovoltaic (PV) groundwater pumping system." Thesis, Cape Peninsula University of Technology, 2005. http://hdl.handle.net/20.500.11838/1270.
Full textAbstract:
Thesis (MTech (Technology))--Cape Peninsula University of Technology, 2005Potable water, and especially the accessibility to it, is an essential part of everyday life. Of particular note, is the challenge that residents of remote rural African villages face in order to gain access to this basic requirement. Specifically, the rural areas in the Northern Cape (Province north of Cape Town) region in South Africa is one such example that illustrates this problem very well. In order to address the requirements for drinkable water, various types of water pumping technologies have been used. Up to now, the two competing water pumping systems, diesel and photovoltaic (PV), have been the primary technologies deployed in selected sites in the Northern Cape. The manual data collection of water pumping system data in the Northern Cape is fraught with impracticalities such as travel costs and requirements for skilled personnel. Therefore, as a preliminary step to accelerate development and testing, a local experimental laboratory PV water pumping rig was set-up within the Department of Mechanical Engineering at the Cape University of Technology. A short-term analysis was performed over a period of three weeks on the rig and the experimental results indicated the following: array efficiency of 16.3%, system efficiency of 15.0% and an average system efficiency of 1.47%. However, the results do indicate that long-term monitoring of PV water pumping systems can be suitable in serving to determine dynamic system performance and system life cycle costs. The purpose of this project is two-fold - firstly, to present the results on the work done on the experimental PV system.
15
Wu, Dan. "Investigation of the reliability of the encapsulation system of photovoltaic modules." Thesis, Loughborough University, 2015. https://dspace.lboro.ac.uk/2134/18051.
Full textAbstract:
Good reliability of the encapsulation system of Photovoltaic (PV) modules is crucial to ensure the long-term performance of PV modules. A carefully controlled lamination process is required to produce a reliable encapsulation system. To date, the influences of different lamination conditions on the reliability of the encapsulation system are poorly understood. To predict the performance of the encapsulation system, the correlation of the reliability of the encapsulation system with various stress levels is required, which is poorly developed. This thesis improves the understanding of these issues by investigating the correlation of different lamination conditions with the reliability of the encapsulation system and the degradation of adhesion strength under variable damp-heat conditions. The influence of the curing temperature and curing time on the long-term reliability of the encapsulation system is investigated from various viewpoints such as curing level of EVA, chemical and optical stability of EVA and adhesion strength within the encapsulation system. The correlation of curing level and lamination quality has been identified. The effects of over-curing are demonstrated. Results show that the chemical stability, optical stability and the adhesion strength between encapsulant and backsheet increases with the increasing curing level. However, the best long-term adhesion performance at the glass-encapsulant interface is obtained at lower gel content. Too high curing can cause problems of bubble generation, discoloration and unstable interfaces. Among those identified degradation phenomena, interfacial adhesion strength demonstrates the fastest and the largest degradation. The reliability of the adhesion strength is further examined under different stress levels. Among different environmental stress factors, moisture is considered to cause the greatest problems of adhesive interfacial stability. Therefore, the adhesion strength is investigated under different damp-heat conditions. A methodology is developed that can be used to model the adhesion degradation induced by moisture at different humidity and temperature conditions. To do so, a stress model is established which enables quantitative description of the moisture related stresses on PV modules. Based on this model, an exponential correlation is established between the adhesion strength and the humidity and temperature levels. This enables the comparison of adhesion strength of PV modules operating at different humid environments.
16
Luthander, Rasmus. "Photovoltaic System Layout for Optimized Self-Consumption." Thesis, Uppsala universitet, Fasta tillståndets fysik, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-203996.
Full textAbstract:
Most of the photovoltaic (solar cell) systems in Sweden today are installed on private houses and connected to the public grid. Photovoltaic (PV) power can be consumed directly in the house, called self-consumption, or fed in to the public grid. For the house owner self-consumed PV energy often has a higher economic value than sold excess PV energy, since the savings from not buying one kWh is larger than the income of selling one kWh. The self-consumption can be expressed as an absolute value; amount of produced/consumed kWh, or as a relative; absolute self-consumption divided with total PV production. The PV production and self-consumption were calculated on an hourly basis. In this Master thesis a MATLAB tool for calculating and optimizing the production, absolute and relative self-consumption and profit for PV systems with panels in one (1DPV), two or three directions (3DPV) was developed. The results show possibilities to increase especially the relative self-consumption with 3DPV. There is however no economic gain of using 3DPV instead of south-directed 1DPV for the studied case; a private house close to Västerås with a 1DPV system of 3360 W and variable electricity prices based on hourly Nord Pool Spot prices. The rated power of the inverter can be decreased with 3DPV compared to south-oriented 1DPV and still keep minimal production losses. A smaller inverter and other peripheral equipment such as cables might compensate for the lower yearly profit with 3DPV when calculating the payback period. Further studies of economic aspects and how to optimize them have to be carried out for 3DPV systems, since economy is very crucial for investment decisions.
17
Vrzal, Martin. "Optimalizace návrhu velikosti PV systémů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254209.
Full textAbstract:
The master thesis deals with proposal of size optimization of PV systems. According to results of optimization, alternative solutions of photovoltaic system were proposed for family house. From the perspective of costs efficiency were compared investment costs and savings of implementation of electricity supply directly to private consumption. Particularly for each of the proposed solution, profitability assessment of comparing purchasing costs and returns on investment was performed. Theoretical part of the master thesis consists of introduction into solar radiation principles, structure and functionality of photovoltaic systems, electronics inverters and accumulation of electric energy. The practical part is focused on measuring of electricity consumption in particular family house, calculation of sunlight intensity hitting tested house, making various solutions of photovoltaic power plants placed on the family house in order to evaluate returns on investments. In conclusion are summarized all results of investigated solutions according to economics aspects.
18
Deng, Wenpeng. "A solar PV-LED lighting system with bidirectional grid ballasting." Thesis, University of Cambridge, 2015. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.709190.
Full text
19
Leyte-Vidal, Albert. "ESTABLISHING DEGRADATION RATES AND SERVICE LIFETIME OF PHOTOVOLTAIC SYSTEMS." Master's thesis, University of Central Florida, 2010. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/3001.
Full textAbstract:
As fossil fuel sources continue to diminish, oil prices continue to increase, and global warming and CO2 emissions keep impacting the environment, it has been necessary to shift energy consumption and generation to a different path. Solar energy has proven to be one of the most promising sources of renewable energy because it is environmentally friendly, available anywhere in the world, and cost competitive. For photovoltaic (PV) system engineers, designing a PV system is not an easy task. Research demonstrates that different PV technologies behave differently under certain conditions; therefore energy production varies not only with capacity of the system but also with the type of module. For years, researchers have also studied how these different technologies perform for long periods of time, when exposed out in the field. In this study, data collected by the Florida Solar Energy Center for periods of over four years was analyzed using two techniques, widely accepted by researchers and industry, to evaluate the long‐term performance of five systems. The performance ratio analysis normalizes system capacity and enables the comparison of performance between multiple systems. In PVUSA Regression analysis, regression coefficients are calculated which correspond to the effect of irradiance, wind speed, and ambient temperature, and these coefficients are then used to calculate power at a predetermined set of conditions. This study allows manufacturers to address the difficulties found on system lifetime when their modules are installed out on the field. Also allows for the further development and improvement of the different PV technologies already commercially available.M.S.
School of Electrical Engineering and Computer Science
Engineering and Computer Science
Electrical Engineering MSEE
20
Li, Fanxun. "STUDY OF FACTORS AFFECTING DISTRIBUTION SYSTEM PV HOSTING CAPACITY." UKnowledge, 2019. https://uknowledge.uky.edu/ece_etds/140.
Full textAbstract:
As renewable energy plays an increasingly important role in the power system, the addition of PV systems to the distribution network has become a major trend in the current power system development. However, if a PV system with excessive capacity is added to the distribution network, voltage problems may occur in the system. Hence, it is important to determine the capacity of the PV system that can be added at the distribution system.
The thesis aims to identify the major factors that affect the PV hosting capacity of distribution systems. The thesis studies various scenarios for the IEEE-123 test network PV system and evaluates the PV hosting capacity of the distribution system based on simulation tools including Matlab and Opendss software.
21
Martinovic, Zarko. "Design a PV – system for a large building." Thesis, Högskolan i Gävle, Avdelningen för bygg- energi- och miljöteknik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-17539.
Full textAbstract:
This study presents the complete design of a photovoltaic system in commercial buildings. PV installation for Multiarena was primary used for internal consumption, rest of production will be sent according intentions in grid. Project presents theoretical demand calculations for building consumptions. According to the theoretical calculations numerical study has been provided by software Indoor Climate and Energy program. Detailed electric optimization strategy can be founded in project description, as well as the sizing of the photovoltaic installation and economic and financial issues related to it. Study presents several models for photovoltaic system and their economic analysis. Environmental issues can be founded at the end of the study.
22
Schelin, Eric. "PHOTOVOLTAIC SYSTEM YIELD EVALUATION IN SWEDEN : A performance review of PV systems in Sweden 2017-2018." Thesis, Mälardalens högskola, Akademin för ekonomi, samhälle och teknik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-44667.
Full textAbstract:
The goal of this study is to evaluate Swedish photovoltaic systems regarding energy production from two different years and compare the gathered data with results from a model simulating optimal conditions. This is done to investigate how the energy production differs between each year, why there are differences, and also to evaluate the simulation tools compared to the real production data. A good way to measure performance is to calculate the specific yield, that is the energy produced per unit of installed power (kWh/kWp). In order to complete this study, a literature study was made to investigate reasons for potential variations in PV system yield. Besides that, the production data from 2373 PV systems in Sweden were collected from different databases, and the data were sorted and compiled in order to calculate specific yield (kWh/kWp). The total number of PV systems after sorting was 828 for the 2017-2018 data and 1380 systems for the 2018 data. Data from real PV system production was compared with calculations performed in two simulation tools, PVGIS and PVsyst. Differences in calculation methods were investigated for performance evaluations between the two programs, and also for comparison with the real plant data. The results showed that the average specific yield for Sweden as a whole, to be 798 kWh/kWp for 2017. For 2018 with the results where 890 kWh/kWp when looking at the exact same plants as for 2017. This is an increase of 11,5%. For the simulation tools the results where 974 kWh/kWp for PVGIS, and 978 for PVsyst for an optimized system. Larger variations in specific yield occurs between every of the 21 counties in Sweden. The solar irradiations show significant correlations to the variations of the 2017 and 2018 specific yield data. Differences between the production data from the two years and the simulation tools wereinvestigated further. Reasons for this was discussed to be because of orientations of the panels and shading of the panels. Real PV systemsdiffer in orientation and the amount of shadowing from the simulated calculations.
23
Mubaraki, Abesh Sorab. "IMPACT OF PHOTOVOLTAIC SYSTEM PENETRATION ON THE OPERATION OF VOLTAGE REGULATOR EQUIPMENT." DigitalCommons@CalPoly, 2013. https://digitalcommons.calpoly.edu/theses/965.
Full textAbstract:
The growing popularity of photovoltaic (PV) generation systems leads to an increase in the number of residential and commercial grid-tied PV systems that interconnect to the distribution circuit. This affects the characteristics of the distribution circuit; for example, the assumption that the voltage profile of a radial line decreases down-stream becomes invalid because of the addition of the PV system on the line. This poses new challenges when setting the parameters of voltage regulating devices. Add to that the fact that PV systems are intermittent, especially on cloudy days, which make the line even more difficult to regulate, and the number of switching occurrences of the regulating devices increases, thus accelerating wear-and-tear to the utility’s equipment.
The objective of this thesis is to develop an index which qualitatively indicates the impact of PV system(s) on operation, efficiency, reliability, and lifetime of voltage regulation equipment. Tests on the proposed index will be performed on several cases including circuits containing state-of-the art methods that integrate PV systems with minimum impact to utility equipment. Investigation of methods to further mitigate equipment wear by selecting the best interconnect point on the circuit will also be conducted to test the proposed index. The development and validation of the proposed index will entail power system modeling and simulation of distributed generation using PSCAD. The proposed index resulted from this study will provide a useful tool to allow utility companies pick the optimum locations for distributed generation to minimize their negative impact on the distribution lines as well as to determine the need for extra mitigation equipment.
24
Basavalingappa, Sharat. "Grid-Tied Solar Photovoltaic (PV) System with Battery storage : A Brief Techno-Economic Analysis." Thesis, Högskolan i Halmstad, Akademin för ekonomi, teknik och naturvetenskap, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-40444.
Full textAbstract:
Most of the world’s electricity is being generated through conventional sources of energy like coal and nuclear. People are realizing the dire effect of using these fuels, and the amount of CO2 being released into the environment. Therefore, in recent year there has been a shift in emphasis towards cleaner ways of generating electricity. One such recent trend is solar photovoltaics (PV), which has seen rapid growth over the years. This ever-increasing trend of adopting PV system allows consumers to be producers or “Prosumers”. Due to the irregular production capability of solar PV, the need for an energy storage system like a battery bank is on the rise as well. This report evaluates how solar PV can be used in combination with a battery bank to supply the annual electricity demand for a household with little to no support from the grid. The building is assumed to be located in Bangalore, India. The energy demand for the household is estimated based on the requirements of a basic Indian house standard. The size and configuration of each component have been done with regards to the total load demand. Furthermore, the cost of the whole system is estimated in order to evaluate the feasibility of the grid-tied system from an economic perspective. The results show that a PV system consisting of four 270W solar panels, a battery bank of eight150Ah lead-acid batteries and a 48V 4kW inverter is required to meet the annual energy demand of the house. The results show that from a technical standpoint, the above-mentioned technology is feasible. The results from the economic evaluation show that the localized cost of energy(LCOE) for the system is ₹6.01/kWh or € 0.078/kWh or 0.84SEK/kWh and the payback time for the given system is 16.19 years. On the bright side, there are new technological advancements in the PV field every day, which could mean that an energy system of this type can be an achievable and practical alternative. Most of the world’s electricity is being generated through conventional sources of energy like coal and nuclear. People are realizing the dire effect of using these fuels, and the amount of CO2 being released into the environment. Therefore, in recent year there has been a shift in emphasis towards cleaner ways of generating electricity. One such recent trend is solar photovoltaics (PV), which has seen rapid growth over the years. This ever-increasing trend of adopting PV system allows consumers to be producers or “Prosumers”. Due to the irregular production capability of solar PV, the need for an energy storage system like a battery bank is on the rise as well. This report evaluates how solar PV can be used in combination with a battery bank to supply the annual electricity demand for a household with little to no support from the grid. The building is assumed to be located in Bangalore, India. The energy demand for the household is estimated based on the requirements of a basic Indian house standard. The size and configuration of each component have been done with regards to the total load demand. Furthermore, the cost of the whole system is estimated in order to evaluate the feasibility of the grid-tied system from an economic perspective. The results show that a PV system consisting of four 270W solar panels, a battery bank of eight 150Ah lead-acid batteries and a 48V 4kW inverter is required to meet the annual energy demand of the house. The results show that from a technical standpoint, the above-mentioned technology is feasible. The results from the economic evaluation show that the localized cost of energy (LCOE) for the system is ₹6.01/kWh or € 0.078/kWh or 0.84SEK/kWh and the payback time for the given system is 16.19 years. On the bright side, there are new technological advancements in the PV field every day, which could mean that an energy system of this type can be an achievable and practical alternative.
25
Simhadri, Arvind. "Impact of distributed generation of solar photovoltaic (PV) generation on the Massachusetts transmission system." Thesis, Massachusetts Institute of Technology, 2015. http://hdl.handle.net/1721.1/98604.
Full textAbstract:
Thesis: S.M., Massachusetts Institute of Technology, Engineering Systems Division, 2015. In conjunction with the Leaders for Global Operations Program at MIT.Thesis: M.B.A., Massachusetts Institute of Technology, Sloan School of Management, 2015. In conjunction with the Leaders for Global Operations Program at MIT.
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 73-76).
After reaching 250 megawatt direct current (MW dc) of solar photovoltaic (PV) generation installed in Massachusetts (MA) in 2013, four years ahead of schedule, Governor Deval Patrick in May of 2013 announced an increase in the MA solar PV goal to 1,600 MW by 2020 ([13]). However, integration of such significant quantities of solar PV into the electric power system is potentially going to require changes to the transmission system planning and operations to ensure continued reliability of operation ([14]). The objective of this project is to predict the distribution of solar PV in MA and to develop a simulation framework to analyze the impact of solar generation on the electric power system. To accomplish this objective, we first developed a prediction model for solar PV aggregate and spatial long term distribution. We collected solar PV installation data and electricity consumption data for 2004 to 2014 for each ZIP code in MA. Additional information such as population, land availability, average solar radiance, number of households, and other demographic data per ZIP code was also added to improve the accuracy of the model. For example, ZIP codes with higher solar radiance are more likely to have solar PV installations. By utilizing machine learning methods, we developed a model that incorporates demographic factors and applies a logistic growth model to forecast the capacity of solar PV generation per ZIP code. Next we developed an electrically equivalent model to represent the predicted addition of solar PV on the transmission system. Using this model, we analyzed the impact of solar PV installations on steady-state voltage of the interconnected electric transmission system. We used Siemens PTI's PSS/E software for transmission network modeling and analysis. Additionally, we conducted a sensitivity analysis on scenarios such as peak and light electricity consumption period, different locations of solar PV, and voltage control methods to identify potential reliability concerns. Furthermore, we tested the system reliability in the event of outages of key transmission lines, using N-1 contingency analysis. The analysis identified that the voltage deviation on transmission system because of adding 1,600 MW dc of distributed solar PV is within +/- 5% range. Based on the analysis performed in this thesis, we conclude that the current MA transmission system can operate reliably after the addition of the expected 1,600 MW dc of solar PV. As National Grid acquires information on solar installations, new data will improve the ability and accuracy of the prediction model to predict solar PV capacity and location more accurately. The simulation framework developed in this thesis can be utilized to rerun the analysis to test the robustness of the electric transmission system at a future date.
by Arvind Simhadri.
S.M.
M.B.A.
26
Mtunzi, Busiso. "Design, implementation and evaluation of a directly water cooled photovoltaic- thermal system." Thesis, University of Fort Hare, 2013. http://hdl.handle.net/10353/d1016198.
Full textAbstract:
This research project was based on the Design, Implementation and Evaluation of a Photovoltaic Water heating system in South Africa, Eastern Cape Province. The purpose of the study was to design and investigate the scientific and economic contribution of direct water cooling on the photovoltaic module. The method involved performance comparison of two photovoltaic modules, one naturally cooled (M1) and the other, direct water cooled module (M2). Module M2 was used to produce warm water and electricity, hence, a hybrid system. The study focused on comparing the modules’ efficiency, power output and their performance. The temperatures attained by water through cooling the module were monitored as well as the electrical energy generated. A data logger and a low cost I/V characteristic system were used for data collection for a full year. The data were then used for performance analysis of the modules. The results of the study revealed that the directly water cooled module could operate at a higher electrical efficiency for 87% of the day and initially produced 3.63% more electrical energy each day. This was found to be true for the first three months after installation. In the remaining months to the end of the year M2 was found to have more losses as compared to M1 as evidenced by the modules’ performance ratios. The directly water cooled module also showed an energy saving efficiency of 61%. A solar utilization of 47.93% was found for M2 while 8.77% was found for M1. Economically, the project was found to be viable and the payback period of the directly cooled module (M2) system was found to be 9.8 years. Energy economics showed that the system was more sensitive to the price changes and to the energy output as compared to other inputs such as operation and maintenance and years of operation. A generation cost of R0.84/kWh from the system was found and when compared to the potential revenue of R1.18 per kWh, the system was found to enable households to make a profit of 40.5 %. Use of such a system was also found to be able to contribute 9.55% towards carbon emission reduction each year. From these results, it was concluded that a directly cooled photovoltaic/thermal heating (PV/T) system is possible and that it can be of much help in terms of warm water and electricity provision.
27
Badri, Seyed Ali Mohammad. "Simulation of Photovoltaic Panel Production as Complement to Ground Source Heat Pump System." Thesis, Högskolan Dalarna, Energi och miljöteknik, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:du-12666.
Full textAbstract:
This master thesis presents a new technological combination of two environmentally friendly sources of energy in order to provide DHW, and space heating. Solar energy is used for space heating, and DHW production using PV modules which supply direct current directly to electrical heating elements inside a water storage tank. On the other hand a GSHP system as another source of renewable energy provides heat in the water storage tank of the system in order to provide DHW and space heating. These two sources of renewable energy have been combined in this case-study in order to obtain a more efficient system, which will reduce the amount of electricity consumed by the GSHP system.The key aim of this study is to make simulations, and calculations of the amount ofelectrical energy that can be expected to be produced by a certain amount of PV modules that are already assembled on a house in Vantaa, southern Finland. This energy is then intended to be used as a complement to produce hot water in the heating system of the house beside the original GSHP system. Thus the amount of electrical energy purchased from the grid should be reduced and the compressor in the GSHP would need fewer starts which would reduce the heating cost of the GSHP system for space heating and providing hot water.The produced energy by the PV arrays in three different circuits will be charged directly to three electrical heating elements in the water storage tank of the existing system to satisfy the demand of the heating elements. The excess energy can be used to heat the water in the water storage tank to some extent which leads to a reduction of electricity consumption by the different components of the GSHP system.To increase the efficiency of the existing hybrid system, optimization of different PV configurations have been accomplished, and the results are compared. Optimization of the arrays in southern and western walls shows a DC power increase of 298 kWh/year compared with the existing PV configurations. Comparing the results from the optimization of the arrays on the western roof if the intention is to feed AC power to the components of the GSHP system shows a yearly AC power production of 1,646 kWh.This is with the consideration of no overproduction by the PV modules during the summer months. This means the optimized PV systems will be able to cover a larger part of summer demand compared with the existing system.
28
Ghosh, Shibani. "A Real-time Management of Distribution Voltage Fluctuations due to High Solar Photovoltaic (PV) Penetrations." Diss., Virginia Tech, 2017. http://hdl.handle.net/10919/74424.
Full textAbstract:
Due to the rapid growth of grid-tied solar photovoltaic (PV) systems in the generation mix, the distribution grid will face complex operational challenges. High PV penetration can create overvoltages and voltage fluctuations in the network, which are major concerns for the grid operator. Traditional voltage control devices like switched capacitor banks or line voltage regulators can alleviate slow-moving fluctuations, but these devices need to operate more frequently than usual when PV generation fluctuates due to fast cloud movements. Such frequent operations will impact the life expectancy of these voltage control devices.
Advanced PV inverter functionalities enable solar PV systems to provide reliable grid support through controlled real injection and/or reactive power compensation. This dissertation proposes a voltage regulation technique to mitigate probable impacts of high PV penetrations on the distribution voltage profile using smart inverter functionalities. A droop-based reactive power compensation method with active power curtailment is proposed, which uses the local voltage regulation at the inverter end. This technique is further augmented with very short-term PV generation forecasts. A hybrid forecasting algorithm is proposed here which is based on measurement-dependent dynamic modeling of PV systems using the Kalman Filter theory. Physical modeling of the PV system is utilized by this forecasting algorithm. Because of the rise in distributed PV systems, modeling of geographic dispersion is also addressed under PV system modeling.
The proposed voltage regulation method is coordinated with existing voltage regulator operations to reduce required number of tap-change operations. Control settings of the voltage regulators are adjusted to achieve minimal number of tap-change operations within a predefined time window. Finally, integration of energy storage is studied to highlight the value of the proposed voltage regulation technique vis-à-vis increased solar energy use.Ph. D.
29
Sandberg, Alexander. "A photovoltaic system performance Evaluation Software : For evaluation of ten unique PV-system configurations in the middle of Sweden." Thesis, Mälardalens högskola, Akademin för ekonomi, samhälle och teknik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-26606.
Full textAbstract:
This thesis contains the development of a software capable of evaluating the performance of ten unique photovoltaic (PV) systems located 10 kilometers outside of Västerås, Sweden. The ten systems have different configurations according to this list: Dual-axis tracking Single-axis tracking with 30°tilt Ground mounted, free-standing with 19° tilt Ground mounted, free-standing with 41° tilt Roof mounted with 19°tilt Each of the above configurations exist with and without installed power optimizers adding up to a total of ten unique systems. The development goal for the evaluation software is to provide the user with a variety of tools to determine which of the systems that has the best yield and performance. Integrated in the development of the software is therefore a literature study where it is investigate how photovoltaic systems operate and especially how their performance can be evaluated. Some of the frequently used parameters are; system yield, reference yield and performance ratio. The software features are focused around presenting the data collected from the PV systems in a variety of graphs. The different types of graph are designed to let the user easy compare the data between the systems and thus find how and why a particular system is performing better than the others. The software is developed in a Matlab environment and has an intuitive user interface. The thesis time-frame is too short for any conclusive result to be presented, but to showcase the software features a short-termed evaluation of the systems have been performed. The period evaluated is a three week period in the middle of May 2014. The short-termed evaluation highlights several scenarios and issues that can arise. It has been detected throughout the project that it is difficult to separate which effects that causes one system to be better than the other. Irregularities seen in the data can be caused by many factors. Some of the more evident are; installed power optimizers, differences in system configurations and shadow patterns. By using the software effects like array shading and inaccurate measurements has been discovered.Evaluation of first MW PV plant in Sweden
30
Nelson, Joel A. "EFFECTS OF CLOUD-INDUCED PHOTOVOLTAIC POWER TRANSIENTS ON POWER SYSTEM PROTECTION." DigitalCommons@CalPoly, 2010. https://digitalcommons.calpoly.edu/theses/430.
Full textAbstract:
As the world strives towards finding alternative sources of power generation, photovoltaic generation has become an increasingly prevalent alternative energy source on power systems world-wide. This paper studies the effects that incorporating photovoltaic generation has on the existing power systems and their power system protection schemes. Along with the addition of this emerging alternative energy source comes the volatility of PV power generation as cloud-cover produces erratic variations in solar irradiance and PV power production. Such variations in PV power may lead to unfavorable operating conditions and power system failures. The issues addressed in this paper include a study of inverter harmonic levels for variations in DC voltage and power, and a study of power system protection failures caused by cloud-induced PV power variations. Such issues are addressed so as to provide a better understanding of the effects that cloud-induced PV power generation variability has on power systems and its protection schemes.
31
Kumbasar, Serdar. "Techno-Economic Assessment of Solar PV/Thermal System for Power and Cooling Generation in Antalya, Turkey." Thesis, KTH, Tillämpad termodynamik och kylteknik, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-119608.
Full textAbstract:
In this study a roof-top PVT/absorption chiller system is modeled for a hotel building in Antalya, Turkey to cover the cooling demand of the hotel, to produce electricity and domestic hot water. PVT modules, an absorption chiller, a hot storage tank and a natural gas fired auxiliary heater are the main components of the system. Elecetrical power produced by the system is 94.2 MWh, the cooling power is 185.5 MWh and the amount of domestic hot water produced in the system is 65135 m3 at 45 0C annually. Even though the systems is capable of meeting the demands of the hotel building, because of the high investment costs of PVT modules and high interest rates in Turkey, it is not economically favorable. Using cheaper solar collectors, integrating a cold storage unit in the system or having an improved conrol strategy are the options to increase the system efficiency and to make the system economically competitive.
32
Compadre, Senar David. "Performance evaluation of a rooftop solar photovoltaic power plant in the Gävle Arenaby (Gävle, Sweden): Installation testing." Thesis, Högskolan i Gävle, Energisystem, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-26931.
Full textAbstract:
The current energy situation is taking a turn towards renewable energies, due to the new pacts to curb global warming. These agreements, together with governmental aid, are facilitating an escalation in the production and improvement of new energy systems and the price decrease due to a larger-scale production. Within these energy alternatives, solar energy is found, specifically the subject to be treated in this project is photovoltaic energy, due to its exponential growth in the last 10 years, new tools are being developed for its monitoring and modelling. Therefore, the main objective of this thesis is to develop a method for installation testing of a PV-system. The method should give the installed nominal power of the system and show if the maximum power point trackers work as expected. A large PV-system was installed on the roof of Gävle Arenaby during 2017. A measurement system for monitoring of the power of the system and of the solar irradiance was installed. Different parameters have been taken into account for the adjustment of the model that vary the performance of the system. These factors are: the irradiance received, the module temperature and the angle of incidence. It has been concluded that the results obtained indicate a correct adjustment of the theoretical power against the real power, which means, a correct operation of the generated model. Besides, the expected power follows a linear trend, reaching the power set by the manufacturer for Standard Test Conditions. The results show that the monitored modules-strings fulffill the promised performance and the method for installation testing work as expected. The linear correlation between corrected power and irradiance means that the maximum power point tracker in the inverter works independent of the power.
33
Syrjä, Oskar, Lisa Jonsson, and Joel Valdemarsson. "Installing a photovoltaic system- electricity production and economics : A case study of a PV-system installationon a farm in Falun, Sweden." Thesis, Uppsala universitet, Institutionen för teknikvetenskaper, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-352841.
Full textAbstract:
The installed power of solar produced electricity has increasedexponentially during the last years and an increased interest has risenamong electricity consumers in Sweden regarding installing solar panelsystems. This is a result of a decrease of the initial cost,introduction of a tax credit for small-scale producers and a budgetincrease in a direct capital subsidy. One of these consumers is anowner of a farm in Falun, who plans on installing solar panels.The purpose of this study is to estimate the produced electricity fromthe installed PV-system per year and compare this with the yearlyelectricity consumption. From this, different electricity retailers arecompared to reach the shortest payback period and the highest futureprofit. The results show that an installation would cut the electricitycost by almost a half, from approximately 113 700 SEK to 60 000 SEK peryear, with Vattenfall as the optimal retailer. The total electricityproduction from the PV-system would be approximately 30 794 kWh/yearand the payback period 7.5 years. The investment would also befinancially justifiable using the NPV if the life span of the system islonger than 12 years. A sensitivity analysis is conducted to determinethe strength of the result when altering the input parameters. Theparameters used for this is the snow depth and the electricityconsumption, and the result does not change significantly when changingeither of the parameters
34
Casanaba, Pablo. "Development of a Simple and Cheap Equipment for monitoring the solar Irradiance on PV modules." Thesis, Högskolan i Gävle, Energisystem och byggnadsteknik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-30216.
Full textAbstract:
Increased use of renewable energies that is taking place all over the world is having a very important impact on the photovoltaic solar energy industry. This means of obtaining electrical energy is one of the most promising ones nowadays, thanks to the fact that it is a technology of easy installation and maintenance. However, the number of hours that a photovoltaic system works at maximum power depends almost entirely on environmental conditions, mainly in terms of solar irradiance.Solar irradiance is a magnitude that measures the power released by sunlight per unit area; the higher it is, the more power the photovoltaic system will generate.Therefore, it is very important to measure this magnitude in order to obtain data that either can give information about which is the best place to install a photovoltaic system or expect the device performance.Unfortunately, sensors used nowadays to measure this magnitude are quite expensive. The most widely used are the so-called pyranometers, with an average cost of between 8000 SEK to 10000 SEK, and solar reference cells, which can be quite cheaper (1000 SEK), but also can be the most expensive devices on the market depending on the features they have (some reference cells cost 20000 SEK).In this thesis, a solar irradiance sensor based on the treatment of a current generated by a silicon photodiode has been designed, built and calibrated. The signal generated by the device is a voltage that has been obtained by means of a current-to-voltage converter amplifier stage. Once the construction of the circuit was completed, it was tested on the roof of Hall 45 located in the University of Gävle. The testing was carried out on 13, 14 and 15 May 2019, and it consisted in the comparison of the signal generated by the new device and the signals generated by a pyranometer and a solar cell.The result is a device priced at 200 SEK, which shows acceptable levels of accuracy during central daylight hours but shows a strong angular dependence on incident light during sunrise and sunset.
35
Leppin, Lorenz. "Development of Operational Strategies for a Heating Pump System with Photovoltaic, Electrical and Thermal Storage." Thesis, Högskolan Dalarna, Energiteknik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:du-27304.
Full textAbstract:
This study describes the development of operational strategies for an exhaust air heat pump system that supplies space heating and domestic hot water. The system combines photovoltaic power production with two different storage types. These are electrical storage using batteries and thermal storage in using a domestic hot water tank and in form of the thermal capacity of the building. The investigation of the control strategies is carried out for a detailed single family house model in Sweden in the simulation software TRNSYS. The overall aim of the control strategies is to improve the performance of the energy system in terms of self-consumption, self-sufficiency, final energy and seasonal performance factor. Three algorithms are developed and compared to a base case without additional control. The first algorithm only uses the thermal storage in the hot water tank and the building. The second uses only the battery to store the photovoltaic electricity. The third control algorithm combines both storage types, electrical and thermal. The simulation results show that for the studied system the energetic improvement is higher with the use of electrical storage compared to using thermal storage. The biggest improvement however is reached with the third algorithm, using both storage types in combination. For the case of a photovoltaic-system with 9 kW and battery store with 10.8 kWh and a 180 l hot water store the self-consumption reaches up to 51% with a solar fraction of 41 %. The reduction in final energy consumption for this case is 3057 kWh (31 %) with the heat pump having a seasonal performance factor of 2.6. The highest self-consumption is reached with a photovoltaic-system of 3 kW and battery store with 3.6 kWh, which comes to 71 %.
36
Perez, Gallardo Jorge Raúl. "Ecodesign of large-scale photovoltaic (PV) systems with multi-objective optimization and Life-Cycle Assessment (LCA)." Phd thesis, Toulouse, INPT, 2013. http://oatao.univ-toulouse.fr/10505/1/perez_gallardo_partie_1_sur_2.pdf.
Full textAbstract:
Because of the increasing demand for the provision of energy worldwide and the numerous damages caused by a major use of fossil sources, the contribution of renewable energies has been increasing significantly in the global energy mix with the aim at moving towards a more sustainable development. In this context, this work aims at the development of a general methodology for designing PV systems based on ecodesign principles and taking into account simultaneously both techno-economic and environmental considerations. In order to evaluate the environmental performance of PV systems, an environmental assessment technique was used based on Life Cycle Assessment (LCA). The environmental model was successfully coupled with the design stage model of a PV grid-connected system (PVGCS). The PVGCS design model was then developed involving the estimation of solar radiation received in a specific geographic location, the calculation of the annual energy generated from the solar radiation received, the characteristics of the different components and the evaluation of the techno-economic criteria through Energy PayBack Time (EPBT) and PayBack Time (PBT). The performance model was then embedded in an outer multi-objective genetic algorithm optimization loop based on a variant of NSGA-II. A set of Pareto solutions was generated representing the optimal trade-off between the objectives considered in the analysis. A multi-variable statistical method (i.e., Principal Componet Analysis, PCA) was then applied to detect and omit redundant objectives that could be left out of the analysis without disturbing the main features of the solution space. Finally, a decision-making tool based on M-TOPSIS was used to select the alternative that provided a better compromise among all the objective functions that have been investigated. The results showed that while the PV modules based on c-Si have a better performance in energy generation, the environmental aspect is what makes them fall to the last positions. TF PV modules present the best trade-off in all scenarios under consideration. A special attention was paid to recycling process of PV module even if there is not yet enough information currently available for all the technologies evaluated. The main cause of this lack of information is the lifetime of PV modules. The data relative to the recycling processes for m-Si and CdTe PV technologies were introduced in the optimization procedure for ecodesign. By considering energy production and EPBT as optimization criteria into a bi-objective optimization cases, the importance of the benefits of PV modules end-of-life management was confirmed. An economic study of the recycling strategy must be investigated in order to have a more comprehensive view for decision making.
37
Liu, Xiao. "Power control of single-stage PV inverter for distribution system volt-var optimization." UKnowledge, 2013. http://uknowledge.uky.edu/ece_etds/36.
Full textAbstract:
The output power variability of intermittent renewable sources can cause significant fluctuations in distribution system voltages. A local linear controller that exploits the capability of a photovoltaic inverter to provide both real and reactive power is described. This controller substitutes reactive power for real power when fluctuations in the output of the photovoltaic source are experienced. In this way, the inverter can help mitigate distribution system voltage fluctuations. In order to provide real and reactive to the grid, a three-phase grid-connected single-stage photovoltaic system with maximum power point tracking and power control is described. A method of reducing the current harmonic caused by resonance of the LC filter and transformer is presented. The local linear controller is examined using an example distribution system, and it is found that the controller is effective at mitigating voltage violations. The photovoltaic control system is examined using three-phase single-stage PV inverter system. The power control and damping system show good performance and stability under rapid change of irradiance.
38
Howley, Brian, and Marc Fleischer. "Solar PV Powered Air Conditioner Analysis for an Office/Classroom in a Tropical Climate." Thesis, Högskolan Dalarna, Energiteknik, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:du-19038.
Full textAbstract:
This thesis focuses on using photovoltaic produced electricity to power air conditioners in a tropical climate. The study takes place in Surabaya, Indonesia at two different locations the classroom, located at the UBAYA campus and the home office, 10 km away. Indonesia has an average solar irradiation of about 4.8 kWh/m²/day (PWC Indonesia, 2013) which is for ideal conditions for these tests. At the home office, tests were conducted on different photovoltaic systems. A series of measuring devices recorded the performance of the 800 W PV system and the consumption of the 1.35 kW air conditioner (cooling capacity). To have an off grid system many of the components need to be oversized. The inverter has to be oversized to meet the startup load of the air conditioner, which can be 3 to 8 times the operating power (Rozenblat, 2013). High energy consumption of the air conditioner would require a large battery storage to provide one day of autonomy. The PV systems output must at least match the consumption of the air conditioner. A grid connect system provides a much better solution with the 800 W PV system providing 80 % of the 3.5 kWh load of the air conditioner, the other 20 % coming from the grid during periods of low irradiation. In this system the startup load is provided by the grid so the inverter does not need to be oversized. With the grid-connected system, the PV panel’s production does not need to match the consumption of the air conditioner, although a smaller PV array will mean a smaller percentage of the load will be covered by PV. Using the results from the home office tests and results from measurements made in the classroom. Two different PV systems (8 kW and 12 kW) were simulated to power both the current air conditioners (COP 2.78) and new air conditioners (COP 4.0). The payback period of the systems can vary greatly depending on if a feed in tariff is awarded or not. If the feed in tariff is awarded the best system is the 12 kW system, with a payback period of 4.3 years and a levelized cost of energy at -3,334 IDR/kWh. If the feed in tariff is not granted then the 8 kW system is the best choice with a lower payback period and lower levelized cost of energy than the 12 kW system under the same conditions.
39
Vieira, Turnell Alice. "Decentralized Secondary Frequency Control in an Optimized Diesel PV Hybrid System." Thesis, KTH, Skolan för elektroteknik och datavetenskap (EECS), 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-240405.
Full textAbstract:
This research argues that a diesel-based isolated electrical system can be optimized byintegrating a high share of solar photovoltaic (PV) generation and that the frequencystability of such system can be improved by including the PV participation in frequencyregulation. A case study is developed in order to explore an island’s expansion of theinstalled generating capacity and its optimization. This study uses the tool HOMER tosolve the optimization problem and PowerFactory to verify the frequency stability of theproposed system. The PV integration allows for a reduction of diesel fuel consumption,emissions and generation costs. Additionally, in high PV penetration scenarios, the reducedinertia in such systems can lead to high frequency deviations that may trip the systemprotection. The study demonstrates that the instantaneous frequency deviation after a loadand generation imbalance can be reduced by designing the PVs to operate with an allocatedreserve and a decentralized time-based secondary frequency control. The frequency stabilitywas achieved after different disturbance scenarios under high PV penetration and reducedavailable inertia, indicating that high PV integration is economically and technically feasiblein small island grids.I detta examensarbete studeras hur ett dieselbaserat och isolerat elsystem kan optimeras genom att integrera en hög andel solceller (PV) i elproduktionen och att frekvensstabilitet kan förbättras när PV användas i regleringen. En fallstudie har utvecklats under denna forskning för att analysera en ökning av den installerade generationskapacitet vid en ö samt hur detta kan optimeras. I denna studie användas verktyget HOMER för modeloptimering och PowerFactory för att testa den optimerade systemfrekvens stabilitet. Med PV generation kan diesel konsumption, utsläpp och kostnader minskas för hela systemet. En hög andel PV i generationen reducerar elsystemet totala svängmassa vilket kan ledda till avvikelser i systemfrekvensen som kan ursaka att skyddsystem aktiveras. Studien demonstrerar att den momentana systemavvikelsen efter en obalans kan reduceras genom att designa PV i systemet med en allokerad reserv och en decentraliserad och tidsbaserad sekundär frekvensreglering. Frekvensstabiliteten nåddes i olika obalans scenarier med hög andel solcellgeneration och misnkat svängsmassa. Detta tyder på att en hög andel PV integration är både ekonomisk- och tekniskt möjligt i mindre elsystem.
40
Zeid, Nayef. "An Overview of PVT Module for the Extraction of Electricity and Heat." Thesis, Högskolan i Gävle, Avdelningen för byggnadsteknik, energisystem och miljövetenskap, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-33998.
Full textAbstract:
The study sets out to review various literatures concerning photovoltaic/thermal (PVT) modules for the extraction of electricity and heat, it also reviews different PVT collectors as well as their performance. The study provides an understanding of a system that fully supports ecological society by promoting the use of solar modules from a different scope in future global resolutions. Furthermore, it looks into renewable energy in Sweden, solar energy and PVT systems, operational principles of hybrid PVT collectors, PVT applications, PVT market and legal face of PVT in Sweden among others. Among other social benefits, PVT system contributes enormously to energy savings and energy consumption which in turn lowers CO2 emissions. The review shows that PVT modules can provide homes and industries with 100% renewable electricity and heat that is affordable. This paper adopts systematic literature review, as it allows thorough cross-examination of various publications regarding the subject.
41
Absalyamova, Viktoriya. "Energy Analysis within Industrial Hydraulics and Correspondent Solar PV System Design." Thesis, Högskolan Dalarna, Maskinteknik, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:du-5099.
Full textAbstract:
Energy efficiency and renewable energy use are two main priorities leading to industrial sustainability nowadays according to European Steel Technology Platform (ESTP). Modernization efforts can be done by industries to improve energy consumptions of the production lines. These days, steel making industrial applications are energy and emission intensive. It was estimated that over the past years, energy consumption and corresponding CO2 generation has increased steadily reaching approximately 338.15 parts per million in august 2010 [1]. These kinds of facts and statistics have introduced a lot of room for improvement in energy efficiency for industrial applications through modernization and use of renewable energy sources such as solar Photovoltaic Systems (PV).The purpose of this thesis work is to make a preliminary design and simulation of the solar photovoltaic system which would attempt to cover the energy demand of the initial part of the pickling line hydraulic system at the SSAB steel plant. For this purpose, the energy consumptions of this hydraulic system would be studied and evaluated and a general analysis of the hydraulic and control components performance would be done which would yield a proper set of guidelines contributing towards future energy savings. The results of the energy efficiency analysis showed that the initial part of the pickling line hydraulic system worked with a low efficiency of 3.3%. Results of general analysis showed that hydraulic accumulators of 650 liter size should be used by the initial part pickling line system in combination with a one pump delivery of 100 l/min. Based on this, one PV system can deliver energy to an AC motor-pump set covering 17.6% of total energy and another PV system can supply a DC hydraulic pump substituting 26.7% of the demand. The first system used 290 m2 area of the roof and was sized as 40 kWp, the second used 109 m2 and was sized as 15.2 kWp. It was concluded that the reason for the low efficiency was the oversized design of the system. Incremental modernization efforts could help to improve the hydraulic system energy efficiency and make the design of the solar photovoltaic system realistically possible. Two types of PV systems where analyzed in the thesis work. A method was found calculating the load simulation sequence based on the energy efficiency studies to help in the PV system simulations. Hydraulic accumulators integrated into the pickling line worked as energy storage when being charged by the PV system as well.
42
Maxamhud, Mahamed, and Arkam Shanshal. "SELF-SUFFICIENT OFF-GRID ENERGY SYSTEM FOR A ROWHOUSE USING PHOTOVOLTAIC PANELS COMBINED WITH HYDROGEN SYSTEM : Master thesis in energy system." Thesis, Mälardalens högskola, Akademin för ekonomi, samhälle och teknik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-49379.
Full textAbstract:
It is known that Sweden is categorised by being one of the regions that experience low solar radiation because it is located in the northern hemisphere that has a low potential of solar radiation during the colder seasons. The government of Sweden aim to promote a more sustainable future by applying more renewable initiative in the energy sector. One of the initiatives is by applying more renewable energy where PV panels will play a greater role in our society and in the energy sector. However, the produced energy from the PV panels is unpredictable due to changes in radiation throughout the day. One great way to tackle this issue is by combining PV panels with different energy storage system. This thesis evaluates an off-grid rowhouse in Eskilstuna Sweden where the PV panels are combined with a heat pump, thermal storage tank, including batteries and hydrogen system. The yearly electrical demand is met by utilizing PV panels, battery system for short term usage and hydrogen system for long-term usage during the colder seasons. The yearly thermal demand is met by the thermal storage tank. The thermal storage tank is charged by heat losses from the hydrogen system and thermal energy from heat pump.The calculations were simulated in Excel and MATLAB where OPTI-CE is composed with different components in the energy system. Furthermore, the off-grid household was evaluated from an economic outlook with respect to today’s market including the potential price decrease in 2030.The results indicated that the selected household is technically practicable to produce enough energy. The PV panels produces 13 560 kWh annually where the total electrical demand reaches 6 125 kWh yearly (including required electricity for the heat pump). The annual energy demand in terms of electricity and thermal heat reaches 12 500 kWh which is covered by the simulated energy system. The overproduction is stored in the batteries and hydrogen storage for later use. The back-up diesel generator does not need to operate, indicating that energy system supplies enough energy for the off-grid household. The thermal storage tank stores enough thermal energy regarding to the thermal load and stores most of the heat during the summer when there are high heat losses due to the charge of the hydrogen system. The simulated energy system has a life cycle cost reaching approximately k$318 with a total lifetime of 25 years. A similar off-grid system has the potential to reduce the life cycle cost to k$195 if the energy system is built in 2030 with a similar lifespan. The reduction occurs due to the potential price reduction for different components utilized in the energy system.
43
Abed, James. "Design consideration, comparative evaluation and cost analysis of a Photovoltaic (PV) system and a generator for off-grid use in California." Thesis, California State University, Long Beach, 2015. http://pqdtopen.proquest.com/#viewpdf?dispub=1603751.
Full textAbstract:
Technology improvement on solar systems has recently given the solar industry a big boost in the market especially in locations such as California where solar irradiance is abundant and fossil fuel prices are constantly on the rise. However solar power technology is not perfect and may still have some drawbacks. This project presents a theoretical evaluation and comparison between two possible off-grid systems in accordance with their cost over a fixed amount of years. A case study will be conducted to determine which of the following two off-grid systems best satisfies a given load profile in terms of cost and efficiency: a Photovoltaic (PV) system with battery back-up or an AC generator with diesel fuel engine. A cost comparison of both systems will determine whether solar energy is a good investment and can be considered as an alternative power solution for the future. A MATLAB simulation of the PV system will help visualize the battery’s charging process with respect to the load.
44
Samadi, Afshin. "Large Scale Solar Power Integration in Distribution Grids : PV Modelling, Voltage Support and Aggregation Studies." Doctoral thesis, KTH, Elektriska energisystem, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-154602.
Full textAbstract:
Long term supporting schemes for photovoltaic (PV) system installation have led to accommodating large numbers of PV systems within load pockets in distribution grids. High penetrations of PV systems can cause new technical challenges, such as voltage rise due to reverse power flow during light load and high PV generation conditions. Therefore, new strategies are required to address the associated challenges. Moreover, due to these changes in distribution grids, a different response behavior of the distribution grid on the transmission side can be expected. Hence, a new equivalent model of distribution grids with high penetration of PV systems is needed to be addressed for future power system studies. The thesis contributions lie in three parts. The first part of the thesis copes with the PV modelling. A non-proprietary PV model of a three-phase, single stage PV system is developed in PSCAD/EMTDC and PowerFactory. Three different reactive power regulation strategies are incorporated into the models and their behavior are investigated in both simulation platforms using a distribution system with PV systems. In the second part of the thesis, the voltage rise problem is remedied by use of reactive power. On the other hand, considering large numbers of PV systems in grids, unnecessary reactive power consumption by PV systems first increases total line losses, and second it may also jeopardize the stability of the network in the case of contingencies in conventional power plants, which supply reactive power. Thus, this thesis investigates and develops the novel schemes to reduce reactive power flows while still keeping voltage within designated limits via three different approaches: decentralized voltage control to the pre-defined set-points developing a coordinated active power dependent (APD) voltage regulation Q(P)using local signals developing a multi-objective coordinated droop-based voltage (DBV) regulation Q(V) using local signals In the third part of the thesis, furthermore, a gray-box load modeling is used to develop a new static equivalent model of a complex distribution grid with large numbers of PV systems embedded with voltage support schemes. In the proposed model, variations of voltage at the connection point simulate variations of the model’s active and reactive power. This model can simply be integrated intoload-flow programs and replace the complex distribution grid, while still keepingthe overall accuracy high. The thesis results, in conclusion, demonstrate: i) using rms-based simulations in PowerFactory can provide us with quite similar results using the time domain instantaneous values in PSCAD platform; ii) decentralized voltage control to specific set-points through the PV systems in the distribution grid is fundamentally impossible dueto the high level voltage control interaction and directionality among the PV systems; iii) the proposed APD method can regulate the voltage under the steady-state voltagelimit and consume less total reactive power in contrast to the standard characteristicCosφ(P)proposed by German Grid Codes; iv) the proposed optimized DBV method can directly address voltage and successfully regulate it to the upper steady-state voltage limit by causing minimum reactive power consumption as well as line losses; v) it is beneficial to address PV systems as a separate entity in the equivalencing of distribution grids with high density of PV systems.The Doctoral Degrees issued upon completion of the programme are issued by Comillas Pontifical University, Delft University of Technology and KTH Royal Institute of Technology. The invested degrees are official in Spain, the Netherlands and Sweden, respectively. QC 20141028
45
Kroutil, Roman. "Komplexní provozní diagnostika FVE-T14 - opatření pro optimalizaci provozu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-242083.
Full textAbstract:
The aim of the Thesis is theoretical clarification of the issues of photovoltaic power plants, their diagnostics, inspection and performance measurement, including negative impacts on their operation and subsequent application of theoretical knowledge during practical inspection and diagnostics of PV power plants. In its introductory part, the Thesis deals with design, manufacturing and development of PV cells and panels and describes other necessary elements and components, including their use in individual types of photovoltaic systems. Another part describes electric parameters of PV cells and panels, especially the parameters that can be found out by measurement of V-A characteristics and also the parameters affecting the shape of the V-A characteristics. The third part is focused on failures of photovoltaic systems, which include various defects of photovoltaic cells and panels, it also provides for adverse factors affecting operation of the entire system, associated not only with weather influences but also with the actual design of the photovoltaic system. The fourth part deals with possibilities of increasing the cost-effectiveness of electricity generation by PV power plants on the basis of practical experience of their operators. The subsequent part determines, on the basis of technical standards, procedures for PV power plant inspections, the procedures for measurement and diagnostics of PV power plants and also other prerequisites connected with inspections and measurements. This part includes also a description of requirements for measuring devices, most frequent measurement errors, adverse impacts affecting measurements and methods of assessment of the data measured. The last part of the Thesis is practical. At first it deals with verification of the impact of defects of PV modules on the shape of their V-A characteristics, then with execution of inspections and diagnostics of a particular PV power plant, evaluation of the data identified and measured, as well as with a proposal of optimisation measures to increase cost-efficiency of the operation of that particular PV power plant.
46
Sultani, Jasim Farhood. "Modelling, design and implementation of D-Q control in single-phase grid-connected inverters for photovoltaic systems used in domestic dwellings." Thesis, De Montfort University, 2013. http://hdl.handle.net/2086/9631.
Full textAbstract:
This thesis focuses on the single-phase voltage-source inverter for use in photovoltaic (PV) electricity generating systems in both stand-alone and grid-tied applications. In many cases, developments in single-phase PV systems have followed developments in three-phase systems. Time-variant systems are more difficult to control than time-invariant systems. Nevertheless, by using suitable transformation techniques, time-variant systems can often be modelled as time-invariant systems. After the transformation, the control signals that are usually time-variant (often varying sinusoidally in time) become time-invariant at the fundamental frequency, and are hence much easier to deal with. With this approach, synchronous rotating frame control techniques have been previously proposed for high performance three-phase inverter applications. The transformation theory cannot be applied directly in single-phase systems without modification, and the d-q components would not be time-invariant in situations where harmonics, resonances or unbalance is present. Single-phase inverter controller designs based on the use of a synchronous rotating reference frame have been proposed, but such designs do not always perform as well as expected. This thesis aims to improve single-phase voltage-source inverters. The main objective is to address, in terms of cost, efficiency, power management and power quality, the problems found with single-phase designs based on a synchronous rotating frame single-phase inverter controller. Consequently, this thesis focuses on a novel controller approach in order to obtain a more reliable and flexible single-phase inverter. As the first step, this thesis investigates the single-phase inverter switching gate-drive algorithms and develops a form of space-vector pulse-width-modulation (SVPWM) in order to reduce total harmonic distortion. The results of the new SVPWM algorithm demonstrate its superior performance when compared with sinusoidal pulse-width-modulation (SPWM) which is often used with single-phase inverters. The second step, which is further reviewed and presented in this thesis, is the modelling of the single-phase inverter control based on the synchronous rotating frame. A mathematical analysis is conducted to determine the mechanism of the coupling that exists between the voltage phase and amplitude terms, and a new transformation strategy is proposed based on using the voltage phase as a reference at the Park transformation stages, and the current phase as a reference for the current at the transformation stages. The line-frequency components of the feedback signals are transformed to time-invariant components, thus eliminating the ripple and reducing the computational burden associated with the controller stage. Consequently, the inverter feedback controller stage is designed so that the coupling terms are decoupled within the controller itself. The effectiveness of the techniques proposed in this thesis are demonstrated by simulation using the MATLAB/SIMULINK environment. The proposed technique was also investigated through a practical implementation of the control system using a Digital Signal Processor (DSP) and a single-phase inverter. This practical system was tested up to 1 kW only (limited by the available inverter hardware). Nevertheless, the correlation between the simulation and the practical results is high and this gives confidence that the developed mechanism will allow the 2.5kW goal to be achieved. Practical test cases illustrate the effectiveness of the models. In addition, the comparisons between experimental and simulation results permit the system's behaviour and performance to be accurately evaluated. With the development of the new controller, small-scale single-phase renewable energy systems will become more useful in the field of power quality management through their ability to separately control the phase and amplitude of the output voltage. Consequently, incorporation of this type of generator within the national electrical distribution network, as distributed generators (DG) at low-voltage level, can assist with power quality management at the consumer side of the grid. In addition, such a generator can also operate in stand-alone mode if the grid becomes unavailable. The third step in this thesis investigates small-scale single-phase renewable energy systems operating as decentralized distributed generators within a local network. This operation is achieved by controlling the inverter side using the quantities measured at the common coupling point between the grid and the inverter, without requiring other extensive communications. Thus, the small-scale single-phase renewable energy distributed generator systems will contain only a local controller at each installation.
47
Vai, Vannak. "Planning of low voltage distribution system with integration of PV sources and storage means : case of power system of Cambodia." Thesis, Université Grenoble Alpes (ComUE), 2017. http://www.theses.fr/2017GREAT044/document.
Full textAbstract:
La consommation d'énergie augmente d'année en année en raison de la croissance de la population et des conditions économiques. Afin de répondre aux besoins de la population et de la société d'utiliser l'électricité, le Gouvernement Cambodgien a mis en place la politique de promotion et d'encouragement du développement de l’électrification ; tous les villages auront de l'électricité d'ici 2020 et au moins 70% des domiciles auront accès à la bonne qualité du réseau électrique d'ici 2030. Pour réussir ces objectifs, l'étude et le développement de la méthodologie du réseau de distribution basse tension (BT) sont étudiés. Cette thèse étudie la planification du réseau de distribution BT avec intégration de Photovoltaïque (PV) et de stockage d’énergie de batterie (BES). La première partie est développée la méthode de planification à long terme pour tacler le défi de l'incertitude sur la charge en zone urbaine ;le nouvel algorithme a été développé pour rechercher l'architecture optimale de minimisation du coût d’investissement (CAPEX) et d’exploitation (OPEX) qui respecte l'ensemble de contraintes topologies et électriques (courant et tension) grâce à la programmation linéaire mixte en nombres entiers à contraintes quadratiques (PLMNECQ), le plus court chemin , first-fit bin-packing, et la méthode de Monte-Carlo. La deuxième partie est traité de l'extension de la zone de couverture de l'électricité avec deux solutions possibles, sont le renforcement du réseau et l'intégration de PV-BES pour le village rural ; l'algorithme génétique (GA) et la technique itérative ont été codés pour rechercher l’emplacement et la capacité. La dernière partie du travail est concentrée sur la planification du réseau de distribution résidentielle BT pour les zones non électrifiées aux rural et urbain grâce à l'architecture optimale et l'intégration de PV-BES sur l'horizon de planificationThe energy consumption is increasing year by year due to the growth of population and the economic conditions. In order to meet the need of population and society to use electricity, the Cambodian government has established the policy to promote and encourage the development of electrification; all the villages will have electricity by the year 2020, and at least 70% of households will have access to grid quality by the year 2030. To achieve these goals, the study and development of methodology on the Low-Voltage (LV) distribution system are investigated. This thesis studies the planning of LV distribution system with integration of Photovoltaic (PV) and Battery Energy Storage (BES). The first part is developed the long-term planning method to tackle the challenge of load demand uncertainty in urban area; the novel algorithm was developed to search for the optimal architecture of minimizing the capital expenditure (CAPEX) and the operation expenditure (OPEX) which respects to the set of topology and electrical (current and voltage) thank to mixed integer quadratically constrained programming (MIQCP), shortest-path, first-fit bin-packing, and Monte-Carlo method. The second part is dealt with the extension of electricity coverage area with two possible solutions which are grid reinforcement and integration of PV-BES for rural village; the Genetic algorithm (GA) and iterative technique were coded to search for location and sizing. The last part is concentrated on the planning of residential low-voltage distribution system in both rural and urban for non-electrified area thanks to the optimal architecture and PV-BES integration over the planning horizon
48
Rinaldi, Luca. "Techno-economic analysis for a photovoltaic system with Lithium-Ion battery energy storage for a residential house in Valencia-Spain." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2020.
Find full textAbstract:
This thesis deals with a techno economic analysis of a hybrid photovoltaic(PV)-battery
energy storage (BES) system.
A first view is taken on the technologies and prices of the main components need,
inverter, photovoltaic panels and batteries, and the possible configuration of the plant.
Before proceeding with the complete analysis simulating an entire year, a comparison
between an analysis made with measures based on 5 seconds time step, with the data
taken in a residential hours and a PV plant in Valencia over a week, and on 15 minutes
time step is done. The will is to prove the reliability of the latter one, which is way faster
and lighter.
Proved its reliability, an analysis over an entire year with a time step of 15 minutes is
carried out to evaluate the economic profitability of a hybrid PV-BES plant.
With the results it will be possible to see that, even if a plant with batteries has a positive
Net Present Value (NPV), a system with PV panels only is more convenient.
49
Boman, Kristin, Ida Adolfsson, and Sofia Ekbring. "Bifacial photovoltaic systems established in a Nordic climate : A study investigating a frameless bifacial panel compared to a monofacial panel." Thesis, Uppsala universitet, Institutionen för teknikvetenskaper, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-384180.
Full textAbstract:
The aim with this project was to study the power output from a frameless bifacial photovoltaic (PV) system relative to a traditional monofacial PV system with a frame. A general overview of how the geographical conditions affects the energy utilization of different PV systems is investigated throughout the project. Also, the study examined if further comparisons and evaluations, between PV systems, can be better established. The two examined solar parks, installed under different conditions, are located in Uppsala and Enköping, Sweden. In order to fulfill the aim and compare the different PV systems, three cases were analyzed. To increase the credibility of a comparison between the two cities, a sensitivity analysis considering the weather condition was executed. In case one, the result indicates that a bifacial panel is 5.2% and 3.6% more advantageous than a traditional monofacial panel during summer and winter, respectively. In case two, the frameless, more tilted and elevated bifacial panel is 58% and 680% more advantageous than a traditional monofacial panel during summer and winter, respectively. Also, in case three, the frameless, more tilted and elevated bifacial panel is 19% and 76% more advantageous than a bifacial panel with frame during summer and winter, respectively. When installing a new solar park, it is important to consider the location’s specific features since these affects the energy yield of the PV system. Future installations, which are installed with the intention to evaluate certain properties, is suggested to be installed with more initially comparable conditions in mind.
50
Badawy, Mohamed O. "Grid Tied PV/Battery System Architecture and Power Management for Fast Electric Vehicles Charging." University of Akron / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=akron1468858915.
Full text