Books on the topic 'Physical and mechanical wood properties'

Treacy, Mary. A comparison of mechanical and physical wood properties: Of a range of Sitka spruce provenances. Dublin: COFORD, 2000.

Shukla, N. K. Physical and mechanical properties of woods and tested at the Forest Research Institute. Dehra Dun: Indian Council of Forestry Research and Education, 1991.

Kettunen, P. O. Wood structure and properties. Uetikon-Zuerich: Trans Tech Publications Ltd., 2006.

Belin-Ferré, Esther. Mechanical properties of complex intermetallics. Singapore: World Scientific, 2011.

Rowell, Roger M. Treatments that enhance physical properties of wood. Madison, WI: Forest Products Laboratory, 1987.

Rowell, Roger M. Treatments that enhance physical properties of wood. Madison, WI: Forest Products Laboratory, 1987.

Physical properties of plant and animal materials: Structure, physical characteristics, and mechanical properties. 2nd ed. New York: Gordon and Breach, 1986.

Virginia Polytechnic institute and State University. Dept. of Wood Science & Forest Products., ed. Wood--influence of moisture on physical properties. [Blacksburg, VA]: Dept. of Wood Science and Forest Products, Virginia Polytechnic Institute and State University, 1995.

online, Woodhead publishing, ed. Effect of mechanical and physical properties on fabric hand. Boca Raton: CRC, 2005.

Jamani, Kifah Dafi. Some physical and mechanical properties of elastomeric impression materials. Birmingham: University of Birmingham, 1987.

T. A. C. M. van der Put. A new fracture mechanics theory of wood. New York: Nova Science Publishers, 2011.

Williams, Derek. Machining and related mechanical properties of 15 B.C. wood species. Vancouver, B.C: Forintek Canada Corp., Western Division, 1998.

Liu, Peng. Identification, properties and uses of some Southeast Asian woods. Yokohama, Japan: International Tropical Timber Organization, 1988.

Hiki, Y. Mechanical vibration methods for studying physical properties of solid materials. Hauppauge, N.Y: Nova Science Publishers, 2010.

Wawrousek, H. Data sources of mechanical and physical properties of engineering materials. Eggenstein-Leopoldshafen: Fachinformationszentrum Karlsruhe, 1989.

Serttas, A. E. Relationships between warp tension and fabric physical and mechanical properties. Manchester: UMIST, 1996.

Polyethylene: End-use properties and their physical meaning. Munich: Hanser Publishers, 2012.

Parant, B. Timbers of Guadeloupe. Nogent-sur-Marne, France: Centre Technique Forestier Tropical, 1987.

Commercial timber of Mozambique: Technological catalogue. 2nd ed. [Maputo]: Traforest Lda., 2006.

Bunster, Jaime H. 52 madeiras de Moçambique: Catálogo tecnológico. Maputo: Universidade Eduardo Mondlane, Faculdade de Agronomia e Engenharia Florestal, Departamento de Engenharia Florestal, 1995.

Rault, Jacques. Physical aging of glasses: The VFT approach. Hauppauge, NY: Nova Science Publishers, 2009.

Moore, H. J. Estimates of some physical/mechanical properties of Martian rocks and soillike materials. [Menlo Park, CA]: U.S. Dept. of the Interior, U.S. Geological Survey, 1991.

Park, Byung Dae. Effects of impact modifiers on the mechanical properties of wood-fibre polypropylene composites. Ottawa: National Library of Canada = Bibliothèque nationale du Canada, 1993.

Timell, T. E. Bibliography, historical background, determination, structure, chemistry, topochemistry, physical properties, origin, and formation of compression wood. Berlin: Springer-Verlag, 1986.

Zhang, T. Timber management toward wood quality and end-product value: Workshop highlights and related information. [Sainte-Foy, Quebec]: Forintek Canada, 1998.

Bendtsen, B. A. Mechanical and anatomical properties in individual growth rings of plantation-grown eastern cottonwood and loblolly pine. Madison, WI: Forest Products Laboratory, 1987.

B, Laming Peter, and TNO Building and Construction Research. Centre for Timber Research., eds. Physical and related properties of 145 timbers: Information for practice. Dordrecht: Kluwer Academic Publishers, 1994.

Advances in materials science of wood: Special topic volume with invited papers only. Stafa-Zurich, Switzerland: Trans Tech Publications, 2009.

International Conference on Aluminum Alloys (8th 2002 Cambridge, England). Aluminium alloys 2002: Their physical and mechanical properties : proceedings of the 8th International Conference ICAA8, Cambridge, UK, 2-5 July 2002. Uetikon-Zuerich, Switzerland: Trans Tech Publications, 2002.

Liles, K. J. Mechanical and physical properties of particulate composites in the system titanium nitride-alumina-aluminum nitride. Washington, DC: Dept. of the Interior, 1989.

Liles, K. J. Mechanical and physical properties of particulate composites in the system titanium nitride-alumina-aluminum nitride. Washington, D.C: U.S. Dept. of the Interior, Bureau of Mines, 1989.

International Conference on Aluminum Alloys (7th 2000 Charlottesville, Va.). Aluminium alloys: Their physical and mechanical properties : proceedings of the 7th International Conference ICAA7, held in Charlottesville, Virginia, April 9-14, 2000. Edited by Starke E. A, Sanders T. H, and Cassada W. A. Uetikon-Zuerich, Switzerland: Trans Tech Publications, 2000.

I, Andersen S., ed. Constitutive relations and their physical basis: Proceedings of the 8th Risø International Symposium on Metallurgy and Meterials Science, 7-11 September 1987. Roskilde, Denmark: Risø National Laboratory, 1987.

Hans, Kubler, ed. Wood: The internal optimization of trees. Berlin: Springer, 1997.

Mattheck, C. Wood: The internal optimization of trees. Berlin: Springer, 1995.

Evans, James W. Computer programs for adjusting the mechanical properties of 2-inch dimension lumber for changes in moisture content. Madison, WI: U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1990.

O'Flynn, Damian John. The influence of the mechanical properties of heat treated carbon steels on their solid particle erosion behaviour. Boston Spa, West Yorkshire: British Thesis Service, 1998.

Qld.) International Conference on Aluminium Alloys (9th 2004 Brisbane. Aluminium alloys: Their physical and mechanical properties : proceedings of the 9th International Conference on aluminium alloys (ICAA9). North Melbourne, Vic: Institute of Materials Engineering Australasia, 2004.

Mechanics of the cell. 2nd ed. Cambridge: Cambridge University Press, 2012.

Verrill, S. P. JMFA 2--a graphically interactive Java program that fits microfibril angle x-ray diffraction data. Madison, WI: U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 2006.

Qi, Hucheng. Leaching, hydration and physical-mechanical properties of spent chromated copper arsenate (CCA)-treated wod-cement composites. 2001.

Composites: Mechanical, Physical and Other Properties. NY RESEARCH PRESS, 2015.

Gao, Hong. Dynamic mechanical analysis of wood and wood-based composites. 1994.

Aluminium alloys: Their physical and mechanical properties. Zurich-Uetikon, Switzerland: Trans Tech Publications, 1996.

Inderbitzen, Anton. Deep-Sea Sediments: Physical and Mechanical Properties. Springer, 2012.

Mohsenin, Nuri N. Physical Properties of Plant and Animal Materials: v. 1: Physical Characteristics and Mechanical Properties. Routledge, 2020. http://dx.doi.org/10.4324/9781003062325.

Canadian Douglas fir: Its mechanical and physical properties. Ottawa: J. de L. Taché, 1997.

Iqbal, Mahmood, AGA Khan Rural Support Programme., and Pakistan Forest Institute, eds. Mechanical properties of farmland trees of Northern ares. Gilgit: The AGA Khan Rural Support Programme, 2004.

Metallic Materials: Physical, Mechanical, and Corrosion Properties (Corrosion Technology). CRC, 2003.

Behery, Hassan M. Effect of Mechanical and Physical Properties on Fabric Hand. CRC, 2005.