Log in

Relevant bibliographies by topics / Physical Properties of Bronze Powder / Journal articles

To see the other types of publications on this topic, follow the link: Physical Properties of Bronze Powder.

Journal articles on the topic 'Physical Properties of Bronze Powder'

Author: Grafiati

Published: 3 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Physical Properties of Bronze Powder.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

ROMANOV, ILYA, and ROMAN ZADOROZHNIY. "10.22314/2618-8287-2020-58-4-148-156." Tekhnicheskiy servis mashin 4, no. 141 (2020): 148–56. http://dx.doi.org/10.22314/2618-8287-2020-58-4-148-156.

Full text

Abstract:

Among the well-known repair technologies for restoring bronze parts, there are practically no technologies using metal powders from non-ferrous metals. Electroerosive dispersion is an energy-efficient process that makes it possible to obtain powdered copper and bronze from machine-building waste with lower costs and environmental impact. (Research purpose) The research purpose is in evaluating the physical and mechanical properties of bronze powders obtained by electroerosive dispersion from machine-building waste, and justifying the possibility of their application in the technologies of repa

APA, Harvard, Vancouver, ISO, and other styles

2

Pantulap, Usanee, Chiraporn Auechalitanukul, and Ryan C. McCuiston. "The Effect of Bottom Ash Additions on the Properties of Sintered Bronze-Graphite Composites." Key Engineering Materials 751 (August 2017): 31–36. http://dx.doi.org/10.4028/www.scientific.net/kem.751.31.

Full text

Abstract:

The aim of this research was to study the effect of bottom ash additions to a bronze-graphite composite on the sintering behavior, as well as on the resultant physical, mechanical and tribological properties. The composites were produced by a powder metallurgy technique from prealloyed Cu-10Sn bronze powder, graphite powder and milled bottom ash powder. The compositions studied were Cu-10Sn bronze with constant 5 wt.% graphite, and 0-20 wt.% bottom ash. Samples were die compacted under 795 MPa and sintered at 850 oC for 30 minutes in an open atmosphere furnace. It was found that the sintered d

APA, Harvard, Vancouver, ISO, and other styles

3

Gutko, Yu I., and V. V. Voytenko. "Experimental impact study of ultra‑fine metal powders on technical characteristics and physical properties of foundry sodium silicate sand cores." Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY), no. 1 (April 10, 2024): 20–25. http://dx.doi.org/10.21122/1683-6065-2024-1-20-25.

Full text

Abstract:

The results of the experimental impact study for the mass fractions of ultra‑fine metal powders added into compositions of core mixtures on technical characteristics and physical properties of the foundry sodium silicate sand cores under influence of high temperatures during production of metal castings are presented and discussed. The dependences for technical characteristics and physical properties of the cores on the mass fractions of ultra‑fine powders based on aluminum, steel, and bronze are established. The significant reserves for improving a knocking‑out ability of the cores based on p

APA, Harvard, Vancouver, ISO, and other styles

4

Dorokhov, Alexey Semyonovich, Vyacheslav Alexandrovich Denisov, Roman Nikolayevich Zadorozhny, Ilya Vladimirovich Romanov, and Vitaliy Aleksandrovitch Zuevskiy. "The Tribotechnical Properties of Electrosparks with a Secondary Bronze Coating." Coatings 12, no. 3 (2022): 312. http://dx.doi.org/10.3390/coatings12030312.

Full text

Abstract:

The high cost of metal powder materials and the energy consumption of the methods involved in their production have led to an increase in the cost of technologies for the restoration and hardening of parts. One method of solving this problem is the recycling of powders. A promising method for processing the waste from machine-building industries, including those utilizing non-ferrous metals and alloys, is electroerosive dispersion. Metallic powders from secondary raw materials obtained in this manner have good physical and mechanical properties, and their cost is two to three times less than t

APA, Harvard, Vancouver, ISO, and other styles

5

Carbonell, Montserrat, Luis Virto, and Pedro Gamez-Montero. "Dryout and Replenishment of Bottom-Heated Saturated Porous Media with an Overlying Plain Water Layer." Applied Sciences 8, no. 12 (2018): 2607. http://dx.doi.org/10.3390/app8122607.

Full text

Abstract:

The aim of this paper is to elucidate the influence of the physical properties of both phases—solid matrix and saturating liquid—of bottom-heated porous media with an overlying plain water layer. The dryout, the stability of the system’s water layer-vapor region, and the thermal state evolution are studied. The porous media under study are a bronze powder saturated by water, and a solution of surfactant and coarse sand saturated by the same liquids. From the experimental data obtained, a theoretical approach is carried out to describe the dryout and rewetting process. The influence of the natu

APA, Harvard, Vancouver, ISO, and other styles

6

Whittle, Thomas, and Siegbert Schmid. "Diffraction Studies of Tungsten Bronze Type Relaxor Ferroelectrics." Acta Crystallographica Section A Foundations and Advances 70, a1 (2014): C78. http://dx.doi.org/10.1107/s2053273314099215.

Full text

Abstract:

Ferroelectric materials are essential for modern electronic applications, from consumer electronics to sophisticated technical instruments. Relaxor ferroelectric materials provide the advantage of high dielectric constants over broad temperature ranges not seen in traditional ferroelectrics. Tungsten bronze type compounds have been shown to display a variety of industrially relevant optical and electronic properties amongst others. There is a fundamental relationship between the physical properties displayed by ferroelectrics and the crystal structures in which they form. Of particular interes

APA, Harvard, Vancouver, ISO, and other styles

7

Romanov, Il’ya V., and Roman N. Zadorozhniy. "Isolation of fine powder faction obtained by electroerosion dispersion method." Tekhnicheskiy servis mashin, no. 3 (August 20, 2020): 119–27. http://dx.doi.org/10.22314/2618-8287-2020-58-3-119-127.

Full text

Abstract:

The fundamental properties of metal powders with small particles change, which opens up a wide range of applications of such materials. Currently, nanopowders are used in many industries to improve the quality of the resulting products. (Research purpose) The research purpose is in isolating a fine fraction of metal powders obtained by electroerosive dispersion for further experiments with this material, and also proving the possibility of obtaining such fractions by this method. (Materials and methods) A fine fraction of metal powders obtained by the method of electroerosive dispersion was is

APA, Harvard, Vancouver, ISO, and other styles

8

Pasternak, Viktoriya, Lyudmila Samchuk, Nataliia Huliieva, Igor Andrushchak, and Artem Ruban. "Investigation of the Properties of Powder Materials Using Computer Modeling." Materials Science Forum 1038 (July 13, 2021): 33–39. http://dx.doi.org/10.4028/www.scientific.net/msf.1038.33.

Full text

Abstract:

Granulometric characteristics of structurally inhomogeneous materials based on full-scale mounds of a powder mixture of different fractional composition are established. Regularities of backfilling of powder particles of different shapes and sizes are revealed, and changes in the polydispersity of powder particles within each fraction are justified. It is proved that with a decrease in the average particle size of structurally inhomogeneous AlCu2 materials in a single fraction, the size spread relative to this value of other particles increases. The results of calculating the porosity of backf

APA, Harvard, Vancouver, ISO, and other styles

9

Kobayashi, Takeshi, Toru Maruyama, and Tsutomu Yasuda. "Sliding Properties of Composite Sprayed Coating between Bronze Powder and Solid Lubricant." MATERIALS TRANSACTIONS 44, no. 5 (2003): 1024–28. http://dx.doi.org/10.2320/matertrans.44.1024.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Merkulov, Vladimir, Gulnara Ulyeva, Gulzhainat Akhmetova, and Andrey Volokitin. "SYNTHESIS OF COPOLYMERS FOR PROTECTIVE COATINGS." Journal of Chemical Technology and Metallurgy 59, no. 3 (2024): 639–46. http://dx.doi.org/10.59957/jctm.v59.i3.2024.18.

Full text

Abstract:

Copolymers were obtained in this work and the methodology for their synthesis was worked out. Various fillers were selected for the polymer coating. Resulting copolymers have good adhesion required for composite protective coatings. An experiment was conducted to determine the corrosion resistance of metals coated with copolymers when exposed to aggressive environments, as well as to determine the hardness and thickness of the polymer coatings obtained. It was found that the polymer coating filled with bronze powder, despite the small thickness of 43.4 μm, hasthe best adhesion and corrosion pr

APA, Harvard, Vancouver, ISO, and other styles

11

Vityaz', P. A., V. K. Sheleg, V. M. Kaptsevich, V. M. Aleksandrov, M. A. Zamakh, and S. M. Azarov. "Effect of bronze powder particle shape on the stability properties of porous materials." Soviet Powder Metallurgy and Metal Ceramics 24, no. 12 (1985): 956–59. http://dx.doi.org/10.1007/bf00805257.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Ada, Hakan, Emine Türkmen, Yavuz Kaplan, Elif Özçatalbaş, Ender Şatir, and Sinan Aksöz. "An examination of microstructure, microhardness and tribological properties of ceramic reinforced bronze matrix composite materials." Science of Sintering, no. 00 (2023): 42. http://dx.doi.org/10.2298/sos230414042a.

Full text

Abstract:

In order to obtain better mechanical properties in a bronze alloy, it is important to produce new materials by adding reinforcements and to offer these materials to the industry. In this study, bronze matrix (Cu10Sn) materials were reinforced with boron carbide (B4C) and silicon carbide (SiC) ceramic materials by using the mechanical alloying method. New composite materials were produced by powder metallurgy method by adding ceramic reinforcement (B4C and SiC) at 1, 2, 4 and 8 weight ratios to Cu10Sn alloy, which is the main matrix material. The obtained composite materials examined in terms o

APA, Harvard, Vancouver, ISO, and other styles

13

Hammood, Shahad Ali, Kawthar Yahya Al-Dulaimi, and Haydar Al-Ethari. "A Tribological Study on NAB-Y2O3-CNT Composite prepared by the Powder Metallurgy Method." Engineering, Technology & Applied Science Research 14, no. 5 (2024): 16818–26. http://dx.doi.org/10.48084/etasr.8150.

Full text

Abstract:

Nickel Aluminum Bronze (NAB) alloys display characteristics like superior strength and excellent wear resistance. In this work, NAB was reinforced using various volume fractions of yttrium (Y2O3) and/or carbon nanotube (CNT) particles prepared using the Powder Metallurgy (PM) method. General full factorial design was used in MiniTab19 software. The experimental results showed a significant influence of the Y2O3 and CNT particles on mechanical and physical properties. The optimal results were recorded for the sample having 6 vol.% of Y2O3 and 1.5 vol.% of CNT. This sample exhibited the highest

APA, Harvard, Vancouver, ISO, and other styles

14

SAITO, Atsushi, Ikjin UM, and Hiromasa TAKAHASHI. "Friction and Wear Properties of Bronze Powder Filled Polyacetal/Polyethylene(LDPE, HDPE, HMWHDPE)Blends." Journal of the Society of Materials Science, Japan 51, no. 2 (2002): 207–14. http://dx.doi.org/10.2472/jsms.51.207.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Kus, Hüsamettin, and Duran Altiparmak. "Effect of glass powder on the friction performance of automotive brake lining materials." Science of Sintering, no. 00 (2023): 6. http://dx.doi.org/10.2298/sos211017006k.

Full text

Abstract:

In this study, bronze-based brake linings containing 0-8 wt% glass powder were manufactured by a hot pressing process and tribological properties of produced samples were investigated using a Chase-type friction tester. The hardness and density of the samples were also determined. The microstructures and friction surfaces of the samples were examined using scanning electron microscopy (SEM). As a result, it was dermined that the sample that was reinforced with 8 wt% glass powder has exhibited the best wear behavior. Furthermore, a reduction in the friction coefficient of all the samples with i

APA, Harvard, Vancouver, ISO, and other styles

16

Calignano, Flaviana, Diego Manfredi, Silvia Marola, Mariangela Lombardi, and Luca Iuliano. "Production of Dense Cu-10Sn Part by Laser Powder Bed Fusion with Low Surface Roughness and High Dimensional Accuracy." Materials 15, no. 9 (2022): 3352. http://dx.doi.org/10.3390/ma15093352.

Full text

Abstract:

Tin-bronze alloys with a tin content of at least 10 wt% have excellent mechanical properties, wear resistance, and corrosion resistance. Among these alloys, Cu-10Sn was investigated in this study for production with the laser powder bed fusion process with a 500W Yb:YAG laser. In particular, a design of experiment (DoE) was developed in order to identify the optimal process parameters to obtain full density, low surface roughness, and high dimensional accuracy. Samples were characterized with Archimedes’ method and optical microscopy to determine their final density. It was shown that the firs

APA, Harvard, Vancouver, ISO, and other styles

17

Dursun, Sinan, and Cihangir Duran. "Processing and electrical properties of Pb0.6Ba0.4Nb2O6 ceramics." Journal of Materials Research 25, no. 11 (2010): 2143–49. http://dx.doi.org/10.1557/jmr.2010.0284.

Full text

Abstract:

Lead barium niobate (PBN or PbxBa1–xNb2O6) is a promising tungsten bronze ceramic system that has a morphotropic phase boundary between the orthorhombic and tetragonal phases at x ≈ 0.63, where the spontaneous polarization (Ps ≈ 60–70 μC/cm2) and other ferroelectric properties are known to be higher. However, even textured PBN60 ceramics have low Ps (∼23.9 μC/cm2) and piezoelectric charge coefficient (d33 ≈ 236 pC/N) as compared to the single crystal counterparts. The aim of this study is to control powder processing, green body formation, and sintering conditions to enhance both densification

APA, Harvard, Vancouver, ISO, and other styles

18

Solonenko, L. I., S. I. Repiakh, K. I. Uzlov, A. V. Dziubina, and S. O. Abramov. "Sand-sodium-silicate mixtures structured in steam-microwave environment effective values of thermo-physical properties." Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, no. 6 (2021): 66–71. http://dx.doi.org/10.33271/nvngu/2021-6/066.

Full text

Abstract:

Purpose. Sand-sodium-silicate mixtures, structured by steam-microwave solidification, thermo-physical properties integral-effective values during Al-Mg alloy and graphite cast iron pouring determination. Sand-sodium-silicate mixture apparent density changing according to quartz sand, cladded with sodium silicate solute, fractional composition and its influence on BrA9Zh3L bronze microstructure establishment. Methodology. Quartz sand with 0.23 mm average particle size, sodium silicate solute, aluminum alloy with 8.5% Mg, flake graphite cast iron SCh200 (DSTU 8833:2019), bronze BrA9Zh3L (GOST 49

APA, Harvard, Vancouver, ISO, and other styles

19

Linyuan, Zhao, Yang Mingqing, and Lv Yong. "Solvothermal Synthesis and Near-Infrared Shielding Properties of Cs0.3WO3/WO3 Composites." International Journal of Nanoscience 19, no. 04 (2020): 1950032. http://dx.doi.org/10.1142/s0219581x19500327.

Full text

Abstract:

The Cs[Formula: see text]WO3/WO3 composite with near-infrared shielding properties was synthesized by the solvothermal method using tungstic acid and cesium salt as raw materials. The as-prepared composites were tested by X-ray powder diffraction, scanning electron microscopy, energy spectrum analysis, transmission electron microscopy, electron energy loss spectroscopy, and ultraviolet-visible near-infrared spectroscopy. The effects of different reaction conditions on the structure and near-infrared shielding properties of the synthesized composites were investigated. The best near-infrared li

APA, Harvard, Vancouver, ISO, and other styles

20

Vodyakov, Vladimir N., and Kseniya A. Kulikovskaya. "Optimization of Mechanical Activation Modes for UHMWPE Dry Mixed Powders and Nanomodificators in the Planetary Ball Mill Pulverisette 7." Engineering Technologies and Systems 30, no. 4 (2020): 576–93. http://dx.doi.org/10.15507/2658-4123.030.202004.576-593.

Full text

Abstract:

Introduction. Currently, in various technology areas, bronze, cast iron and other antifriction metals are replaced by polymer composites, which extend significantly service life of tribocoupling. An advanced antifriction polymer is ultra-high-molecular-weight polyethylene. The study deals with determining the optimal specific energy consumption for the mechanical activation of the polymer dry mixed powders and nanomodifiers in the planetary ball mill Pulverisette 7, which ensure the best complex of physico-mechanical and rheological properties of nanocomposites. Materials and Methods. In this

APA, Harvard, Vancouver, ISO, and other styles

21

Rodžianskas, Tomas, Ovidijus Jarašiūnas, Irmantas Gedzevičius, et al. "THE RESEARCH OF PSEUDO COATINGS SPRAYED WITH ELECTRIC ARC SPRAY / PSEUDODANGŲ, UŽPURKŠTŲ ELEKTROLANKINIU BŪDU, TYRIMAS." Mokslas – Lietuvos ateitis 8, no. 6 (2017): 602–8. http://dx.doi.org/10.3846/mla.2016.982.

Full text

Abstract:

The paper presents coatings obtained using two different stainless steel (AISI 316) and marine bronze (CuAl8) wires sprayed with electric arc spraying. Substrate: mild steel S235J2 (LST EN 10025: 2004). Arc spray equipment – “EuTronic Arc Spray 4” with an additional power source. The main task was to select optimal technological spraying process and obtain coatings which possess the best mechanical, physical, tribological properties that meet the requirements of the specific requirements in service coatings. The microhardness, elastic modulus, and morphology was examined. Dry friction wear was

APA, Harvard, Vancouver, ISO, and other styles

22

Marchenko, D., and K. Matvyeyeva. "Research of wear resistance of a covering of shafts of the turbocharger of the diesel engine restored by means of a gas-dynamic spraying." Problems of tribology 101, no. 3 (2021): 63–69. http://dx.doi.org/10.31891/2079-1372-2021-101-3-63-69.

Full text

Abstract:

The analysis of tribological researches on the most perspective way of restoration of a primary resource of engines by means of a gas-dynamic spraying is resulted in article. It was found that to reduce the coefficient of friction and increase the wear resistance of the coating is theoretically justified the use of copper-zinc powders brand C-01-11, applied by gas-dynamic spraying. It is established that the physical and mechanical properties of the coatings (roughness, microhardness, friction coefficient) on the restored turbocharger meet the requirements of the manufacturer. The coefficient

APA, Harvard, Vancouver, ISO, and other styles

23

Vahedi Nemani, Alireza, Mahya Ghaffari, Kazem Sabet Bokati, Nima Valizade, Elham Afshari, and Ali Nasiri. "Advancements in Additive Manufacturing for Copper-Based Alloys and Composites: A Comprehensive Review." Journal of Manufacturing and Materials Processing 8, no. 2 (2024): 54. http://dx.doi.org/10.3390/jmmp8020054.

Full text

Abstract:

Copper-based materials have long been used for their outstanding thermal and electrical conductivities in various applications, such as heat exchangers, induction heat coils, cooling channels, radiators, and electronic connectors. The development of advanced copper alloys has broadened their utilization to include structural applications in harsh service conditions found in industries like oil and gas, marine, power plants, and water treatment, where good corrosion resistance and a combination of high strength, wear, and fatigue tolerance are critical. These advanced multi-component structures

APA, Harvard, Vancouver, ISO, and other styles

24

Chifor, Victoria, Radu Liviu Orban, Zafer Tekiner, and Mehmet Turker. "Mechanical, Thermal and Electrical Properties of Acrilonitril Butadiene Styrene (ABS) Composites Filled with Bronze Powder." Materials Science Forum 672 (January 2011): 179–82. http://dx.doi.org/10.4028/www.scientific.net/msf.672.179.

Full text

Abstract:

This article reports on an experimental study of the mechanical, thermal and electrical properties of bronze-ABS composites containing 5, 10, 20, 30 vol.% of bronze powder. The mechanical properties such as ultimate tensile strength, elongation at fracture, modulus of elasticity, melt flow rate (MFR), hardness, thermal conductivity, electrical conductivity of bronze powder filler embedded in a ABS matrix were experimentally investigated. Thermal and electrical conductivity measurements were performed up to a filler concentration of 30 vol.%. The tensile strength, elongation, MFR values continu

APA, Harvard, Vancouver, ISO, and other styles

25

Auechalitanukul, Chiraporn, Ryan C. McCuiston, Benjawan Bunlangsup, Chanattha Naikorn, and Sudachuan Tapanaun. "Properties of Sintered Bronze-Graphite Containing Natural Anhydrite." Key Engineering Materials 751 (August 2017): 19–24. http://dx.doi.org/10.4028/www.scientific.net/kem.751.19.

Full text

Abstract:

This study examined the effect of natural anhydrite (CaSO4) powder additions on the microstructure and frictional properties of a 95 Bronze - 5 Graphite composite prepared by a powder metallurgy process. Natural anhydrite powder, ranging in content from 2 to 8 weight percent, was added to a premixed bronze powder composed of copper and tin and mixed, before the graphite was added. The powder mixture was compacted into disc shaped samples under a pressure of 500 MPa. The compacted samples were sintered at 750 °C for 30 minute in a reducing atmosphere. The green and sintered densities of the sam

APA, Harvard, Vancouver, ISO, and other styles

26

Jiang, Yu Dong, Xiao Lan Cai, and Kai Jun Wang. "Effects of Ball Mill Additives on Properties of Bronze Powder." Applied Mechanics and Materials 71-78 (July 2011): 3539–42. http://dx.doi.org/10.4028/www.scientific.net/amm.71-78.3539.

Full text

Abstract:

Bronze powders were prepared using high-energy ball mill method. Effects of different additives on particle size and its distribution, gloss, water coverage and oxidation resistance of powders were discussed. The results shows that aluminum stearate has a great impact to sheet formation of bronze powder. Hexadecanoic acid has a great influence on the gloss and water surface covering. Polyvinyl alcohol(PVA) has a marked effect to improve oxidation resistance of the bronze powders.

APA, Harvard, Vancouver, ISO, and other styles

27

Kulikov, S. A., and F. I. Rudnickij. "Influence of cobalt on the properties of casting alloys." Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY), no. 4 (January 10, 2025): 17–24. https://doi.org/10.21122/1683-6065-2024-4-17-24.

Full text

Abstract:

The results of a study of the effect of modification with cobalt powder on the mechanical properties of high‑strength nodular cast iron and tin‑lead bronze are presented. It has been shown that when cobalt powder is introduced up to 0.1 %, it is evenly distributed in the metal matrix. Increasing the amount of the introduced additive revealed that cobalt is predominantly concentrated in the areas that crystallize last. The introduction of cobalt made it possible to increase the tensile strength of high‑strength cast iron and the relative elongation of bronze. The introduction of cobalt powder d

APA, Harvard, Vancouver, ISO, and other styles

28

Giurlani, Walter, Martina Vizza, Stefano Mauro Martinuzzi, et al. "New Frontiers in Electrodeposition for More Sustainable Electroplating Processes." ECS Meeting Abstracts MA2022-02, no. 23 (2022): 956. http://dx.doi.org/10.1149/ma2022-0223956mtgabs.

Full text

Abstract:

Although technological and processing advancements occurred in the past forty years, industrial firms are still struggling to provide solutions to corrosion protection as well as reduction of toxic wastes. Specifically, large-scale industrialization of electroplating techniques will continue to be limited by strict environmental regulations. Moreover, price volatility of the highly demanding electroplated materials like gold, palladium, copper and nickel will heavily impact the market in the next years. In that respect, alloy plating offers better answers in terms of economic growth and enviro

APA, Harvard, Vancouver, ISO, and other styles

29

Nakrod, Narut, Ryan C. McCuiston, and Chiraporn Auechalitanukul. "Effect of Compaction Pressure and Sintering Time on the Properties of Sintered Cu-10Sn Bronze." Key Engineering Materials 751 (August 2017): 37–41. http://dx.doi.org/10.4028/www.scientific.net/kem.751.37.

Full text

Abstract:

Bronze-based composite materials are well known for use as friction materials. They are produced by powder metallurgy techniques from bronze powder, which acts as a matrix, and various friction modifying additives. The objective of this work was to study the effect of compaction pressure and sintering time on the properties of the unmodified bronze matrix. The bronze powder used was prealloyed with a composition of Cu-10Sn. The specimens were pressed by uniaxial die compaction with pressures of 282 to 339 MPa. The sintering experiments were conducted in an alumina tube furnace at 800 °C with s

APA, Harvard, Vancouver, ISO, and other styles

30

Bikberdina, Narkiza Yamaletdinovna, Marina Petrovna Boronenko, Pavel Yur'evich Gulyaev, and Ruslan Danilovich Yunusov. "ELECTROPHYSICAL PROPERTIES OF OXIDE BRONZE NAXWO3." Yugra State University Bulletin 13, no. 3 (2017): 7–11. http://dx.doi.org/10.17816/byusu20171337-11.

Full text

Abstract:

Experimentally determined regularities of the formation of the electrophysical properties of nanoparti- cles of oxide bronzes. Samples of oxide bronzes were obtained by self-propagating high-temperature synthe- sis. Then the samples were subjected to mechanical crushing. Measured conductivity of the samples during heating. Created a special measurement cell for powder materials. Created automated experimental stand. On the experimental test bench conducted a comparative assessment of effective energy of activation of pro- cesses of deintercalation of alkali metal ions in the powders.

APA, Harvard, Vancouver, ISO, and other styles

31

Pelevin, Ivan A., Maxim A. Burmistrov, Dmitriy Yu Ozherelkov, et al. "Laser Powder Bed Fusion of Chromium Bronze Using Recycled Powder." Materials 14, no. 13 (2021): 3644. http://dx.doi.org/10.3390/ma14133644.

Full text

Abstract:

Laser powder bed fusion (LPBF) of Cu-0.5Cr was carried out using recycled powder taken out from the LPBF machine after previous printing. Various volumetric defects characterized the powder wherein particle size distribution was the same as virgin powder. Using recycled powder resulted in extra spherical pore formation after the LPBF process. Despite that, a relative density of 99.2% was achieved by LPBF parameters optimization. Solidified microstructure with a small volume of defects consisted of an oversaturated dendritic Cu matrix and nano-sized Cr precipitations providing strengthening mec

APA, Harvard, Vancouver, ISO, and other styles

32

Ilyushchanka, A. Ph, A. V. Leshok, A. I. Letsko, and T. I. Pinchuk. "Study of the influence of ultra disperse powder additives of the NiAl/Al<sub>2</sub>O<sub>3</sub> system on the tribotechnical properties of the frictional material based on copper." Doklady of the National Academy of Sciences of Belarus 66, no. 1 (2022): 113–21. http://dx.doi.org/10.29235/1561-8323-2022-66-1-113-121.

Full text

Abstract:

The results on the impact of additives on the ultra-fine composite powder system, obtained by MASVS on the tribotechnical properties of friction material based on tin bronze with 12 % of tin are presented. It is shown that the powder additive in the range of 0.5–2.5 % increased the dynamic friction coefficient from 0.040 to 0.051. The introduction of a 1.5 % composite powder reduced the surface roughness of the counter body from 2.9 to 0.9 μm. The change in the tribotechnical properties is due to the structural changes in tin bronze, the additive particles, the surface layer of the friction ma

APA, Harvard, Vancouver, ISO, and other styles

33

Luzan, Sergii, and Vyacheslav Bantkovskiy. "Increasing the anti-friction properties of the surfaces of machine parts through plasma spraying of powder coating PG-19M-01 instead of cast bronze bushing." Bulletin of the National Technical University «KhPI». Series: Automobile and Tractor Construction, no. 1 (October 16, 2023): 47–54. http://dx.doi.org/10.20998/2078-6840.2023.1.05.

Full text

Abstract:

The anti-friction properties of the plasma-sprayed powder coating based on copper PG-19M-01, proposed instead of the cast bronze sleeve made of 05Ts5S5 bronze, used in the coupling of the drive shaft and gear of the T-155 transfer case pumps, were proposed and investigated in the paper. X-ray phase analysis of plasma coatings from PG-19M-01 powder showed that the main phase in the coatings is a solid solution of aluminum in copper. X-ray microspectral analysis established that the composition of the coating is heterogeneous in thickness. The results of the conducted research and field tests sh

APA, Harvard, Vancouver, ISO, and other styles

34

Pétrissans, X., V. Augustyn, D. Giaume, P. Barboux, and B. Dunn. "Low Temperature Syntheses of Transition Metal Bronzes with an Open Structure for High Rate Energy Storage." MRS Proceedings 1547 (2013): 87–94. http://dx.doi.org/10.1557/opl.2013.578.

Full text

Abstract:

ABSTRACTDevelopment of devices storing and delivering high-energy power such as supercapacitors is necessary to assist intermittent sources of energy. Most of the commercial systems are carbon-based, but due to their high surface charge, oxides offer a valuable alternative for high-rate energy storage. Among them, layered transition metal oxides with mixed valence properties present both good electronic and ionic conductivities suitable for application to electrochemical applications intermediate between capacitors and batteries. This work focuses on lamellar oxide bronzes based on cobalt MxCo

APA, Harvard, Vancouver, ISO, and other styles

35

Ma, Hongqiang, Kun Lin, Laijun Liu, et al. "Structure and electrical properties of tetragonal tungsten bronze Ba2CeFeNb4O15." RSC Advances 5, no. 94 (2015): 76957–62. http://dx.doi.org/10.1039/c5ra16115k.

Full text

Abstract:

The crystal structure and electrical property of a tetragonal tungsten bronze ceramic, BaCeFeNb<sub>4</sub>O<sub>15</sub>, were investigated by synchrotron X-ray powder diffraction, selected area electron diffraction, and AC impedance spectroscopy.

APA, Harvard, Vancouver, ISO, and other styles

36

Auechalitanukul, Chiraporn, Ryan C. McCuiston, Benjawan Bunlangsup, Chanattha Naikorn, and Sudachuan Tapanaun. "Properties of Sintered Bronze-Graphite Containing Calcium Sulfate Derived from Waste Plaster Molds." Key Engineering Materials 751 (August 2017): 25–30. http://dx.doi.org/10.4028/www.scientific.net/kem.751.25.

Full text

Abstract:

This study examined the effect of calcium sulfate additions on the microstructure and frictional properties of a 95bronze-5graphite material, commonly used for frictional applications. The samples were prepared using a powder metallurgy process. The calcium sulfate powder was obtained from recycled plaster molds previously used for ceramic slip casting. The plaster molds were cleaned, crushed and ball milled to obtain powder, which was calcined at 400 °C for 4 hours and screened. 2 to 8 weight percent calcium sulfate powder was added to a premixed powder composed of copper and tin and mixed be

APA, Harvard, Vancouver, ISO, and other styles

37

Dorofeyev, V. Yu, E. N. Bessarabov, A. N. Sviridova, I. V. Ivanova, L. I. Svistun, and R. A. Vodolazhenko. "Structure and properties of hot-forged powder steel–bronze bimetal with SiC additives." Powder Metallurgy аnd Functional Coatings 18, no. 3 (2024): 16–27. http://dx.doi.org/10.17073/1997-308x-2024-3-16-27.

Full text

Abstract:

One of the main problems in the production of bimetals is associated with the difference in the physico-mechanical and structural properties of the materials being joined. Both solid-phase and liquid-phase methods are used to obtain bimetals. The main technological task is to create conditions for the formation of a transition zone between the working layer and adhesively bound substrate. We analyzed the known methods for producing compact and powder bimetals (insert molding, diffusion welding in the solid phase, infiltration, hot isostatic pressing, etc.). The bonding strength of bimetal laye

APA, Harvard, Vancouver, ISO, and other styles

38

Zou, Liming, Lizhi Yu, Zaijun Su, and Liejun Li. "The Effect of Powder Composition on the Microstructure and Properties of Bronze Oil-bearings." Journal of Physics: Conference Series 2587, no. 1 (2023): 012017. http://dx.doi.org/10.1088/1742-6596/2587/1/012017.

Full text

Abstract:

Abstract The effects of different powder compositions on the microstructure and properties of the sintered oil bearings were investigated. Three different types of powder were used for the comparative tests. The research conclusions show that three different types of raw material powders have different pore structures. In the case of mixed powders, the sintered samples have a self-lubricating function that can both store oil and supply oil to the friction surface through capillary pores. When the raw material is a mixed powder in which Cu powder is less than 75 μm, it has the best self-lubrica

APA, Harvard, Vancouver, ISO, and other styles

39

Liu, Jing Xiao, Xiao Jie Wang, Fei Shi, et al. "Hydrothermal Synthesis of Cesium Tungsten Bronze and its Heat Insulation Properties." Advanced Materials Research 531 (June 2012): 235–39. http://dx.doi.org/10.4028/www.scientific.net/amr.531.235.

Full text

Abstract:

Using sodium tungstate and cesium carbonate as raw materials, cesium tungsten bronze (CsxWO3) powders were synthesized by low temperature hydrothermal reaction with citric acid as the reducing agent. The CsxWO3 films were prepared on glass using polyvinyl alcohol solution as dispersing agent. The microstructure and morphology of CsxWO3 powders were characterized by XRD and SEM, and the optical spectra and heat insulation properties of CsxWO3 powder and films were investigated. The results indicate that the synthesized cesium tungsten bronze powders have hexagonal Cs0.32WO3 crystal structure. T

APA, Harvard, Vancouver, ISO, and other styles

40

Frota, T. M. P., R. A. Brito, Clodomiro Alves Jr., and V. Hajek. "Microstructure of Plasma-Sintered Aluminum Bronze Powder Compacts." Materials Science Forum 530-531 (November 2006): 133–39. http://dx.doi.org/10.4028/www.scientific.net/msf.530-531.133.

Full text

Abstract:

Porous materials are successfully utilized for fabrication of many industrial components such as filters and selflubricating bearings. These products are made by powder metallurgy, where mixtured or prealloyed powders can be used. The aluminum bronze is one of the most wanted due its excellent properties in combination with low cost of the raw materials. In this work, single action compacted (100 MPa) prealloyed aluminum bronze (Cu- 9wt%Al-1wt%Fe) cylinders were sintered using a hollow cathode discharge at temperatures between 400 and 750°C with duration on the isotherm for 12 min. Microstruct

APA, Harvard, Vancouver, ISO, and other styles

41

Jabur, Adnan S. "Effect of powder metallurgy conditions on the properties of porous bronze." Powder Technology 237 (March 2013): 477–83. http://dx.doi.org/10.1016/j.powtec.2012.12.027.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Camilleri, Steven, Tien Tran, Andrew Duguid, and Kannoorpatti Narayanan Krishnan. "Cold spray as a powder metallurgy process for production of nickel aluminium bronze." PLOS ONE 20, no. 3 (2025): e0319333. https://doi.org/10.1371/journal.pone.0319333.

Full text

Abstract:

Nickel aluminium bronze (NAB) alloys are known for their excellent strength and corrosion resistance, making them suitable for maritime and industrial applications. NAB is producible by Powder Metallurgy (PM) but typically requires high compaction pressure. The objective of this study is to investigate the manufacturing of NAB using the cold spray additive manufacturing (AM) process and to compare its properties to those produced by traditional methods such as casting and PM. Cold spray is a solid-state coating technique that accelerates powdered metal and carrier gas to supersonic speeds, ena

APA, Harvard, Vancouver, ISO, and other styles

43

Pavlova, Svetlana S. "The relationship of dispersion and properties of powder materials on the example of titanium oxide bronze." Yugra State University Bulletin 18, no. 2 (2022): 30–35. http://dx.doi.org/10.18822/byusu20220230-35.

Full text

Abstract:

The subject of this work is oxide potassium-titanium bronzes. The purpose of the work: to establish the relationship between the dispersion of samples of oxide potassium-titanium bronze and its physicochemical properties. Synthesis methods: self-propagating high-temperature synthesis (SHS), mechanosynthesis. Research methods used in the work: X-ray phase analysis (XRF), optical method for determining particle size, four-probe method for determining electrical conductivity, thermal analysis, method for determining chemical resistance. Results of the study: particle sizes were

APA, Harvard, Vancouver, ISO, and other styles

44

Shan, Lian Wei, Wei Li, Ji Hua Wang, Zhong Li, and Li Min Dong. "Pyroelectric Properties of SBN/BST by Powder-Sol Method." Applied Mechanics and Materials 320 (May 2013): 190–95. http://dx.doi.org/10.4028/www.scientific.net/amm.320.190.

Full text

Abstract:

0.7BaO·0.3SrO·0.3Nb2O5·0.7TiO2 (SBN/BST) composite ceramics werefabricated using a Powder-Sol (P-S) method with Nb2O5fine powder suspended in the barium strontium titanate (abbreviated as BST) solsolution. By X-ray diffraction (XRD) investigations, it is found that thetetragonal tungsten bronze (TTB) phase and perovskite phase were co-present incompositions. The average grain size of BST and SBN phase is 140 nm and 2.2 μm,respectively. The room temperature relative dielectric constant is 1445 forthis sample measured at 1 kHz and zero bias. In the room temperature, thepyroelectric coefficient o

APA, Harvard, Vancouver, ISO, and other styles

45

Uhlmann, Eckart, Julian Polte, Janek Maria Fasselt, et al. "A Comparative Evaluation of Powder Characteristics of Recycled Material from Bronze Grinding Chips for Additive Manufacturing." Materials 17, no. 14 (2024): 3396. http://dx.doi.org/10.3390/ma17143396.

Full text

Abstract:

In the manufacturing process of ship propellers, large quantities of grinding chips are generated. These grinding chips result from the finishing of the blade surfaces after the primary casting process of the propeller. The aim of this study was to investigate and compare different preparation processes used to produce chip powders with sufficient powder quality for the additive manufacturing process of directed energy deposition. The preparation of the samples was performed through different sieving, milling and re-melting processes. For the characterization of the prepared samples, powder an

APA, Harvard, Vancouver, ISO, and other styles

46

Ganne, M., A. Boumaza, M. Dion, and J. Dumas. "The blue bronze Tl0.30MoO3 structure and physical properties." Materials Research Bulletin 20, no. 11 (1985): 1297–308. http://dx.doi.org/10.1016/0025-5408(85)90124-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Dyachkova, L. N., P. A. Vityaz, A. Ph Ilyushchenko, L. J. Voronetskaya, A. I. Letsko, and N. M. Parnitsky. "Influence of the ultrafine iron aluminide additive on the structure and properties of iron and copper powder materials." Doklady of the National Academy of Sciences of Belarus 63, no. 3 (2019): 360–69. http://dx.doi.org/10.29235/1561-8323-2019-63-3-360-369.

Full text

Abstract:

The results on the effect of introduction of iron aluminide of various chemical and phase compositions on the structure and mechanical properties of powdered carbon steel and tin bronze are presented. It is shown that the introduction of 0.5 % single-phase iron aluminide Fe3Al leads to an increase in the strength of powdered carbon steel by 30–40 MPa, of biphase Fe2Al5 –FeAl3 – by 80–90 MPa, 1 % – to an insignificant decrease in strength. When a single-phase iron aluminide in the powder steel structure is introduced, a decrease in cementite, differentiation is observed, aluminum diffusion into

APA, Harvard, Vancouver, ISO, and other styles

48

ROMANOV, I. V. "HE USE OF SECONDARY POWDER MATERIALS FOR THE RESTORATION OF BRONZE PARTS OF HYDRAULIC MACHINES." Tekhnicheskiy servis mashin 62, no. 1 (2024): 73–79. http://dx.doi.org/10.22314/2618-8287-2024-62-1-73-79.

Full text

Abstract:

During the operation of agricultural machinery, machine parts and their connections lose their operability, which requires their replacement. The cost of restoration is 50-60 percent of the cost of a new part. The presence of non-ferrous metal and alloy parts in the equipment, and in particular bronze, makes the issue of restoration even more urgent due to the high cost of such parts. Methods using powder materials are particularly successful in restoring worn parts. It is characteristic that in order to reduce the cost of such technologies, it is possible to resort to recycling of metal waste

APA, Harvard, Vancouver, ISO, and other styles

49

Timmons, Kenzie A., Ali Nasiri, and Donald P. Bishop. "Laser Powder Bed Fusion Processing of UNS C64200 Aluminum–Silicon–Bronze." Journal of Manufacturing and Materials Processing 9, no. 5 (2025): 147. https://doi.org/10.3390/jmmp9050147.

Full text

Abstract:

This research focused on developing the processing parameters required to fabricate UNS C64200 aluminum–silicon–bronze (ASB) using laser powder bed fusion (LPBF) additive manufacturing. A full factorial design of experiments (DOE), followed by a central composite DOE, was employed to statistically optimize the as-built density while varying laser power, scan speed, and hatch spacing. Parameter sets that yielded high-density (>99.9%) products were then utilized to manufacture specimens to determine mechanical properties in both the as-built and heat-treated states. The as-built samples exhib

APA, Harvard, Vancouver, ISO, and other styles

50

Chen, Sui Yuan, Xin Rong Li, Di An, Jing Liang, and Chang Sheng Liu. "Preparation and Wear Performance of Novel Graphite/Copper Alloy-Matrix Self-Lubricating Composite Materials." Advanced Materials Research 941-944 (June 2014): 284–87. http://dx.doi.org/10.4028/www.scientific.net/amr.941-944.284.

Full text

Abstract:

A novel graphite/copper alloy-based self-lubricating composite materials were prepared using the powder metallurgy method by composing 663 bronze, Ni, W, nanoAl2O3, MoS2, Ag, CaF2, Sm2O3 as the basic alloy powder and adding 1wt.%, 1.5wt.%, 2wt.%, 2.5wt.%, 3wt.% graphite and nickel coated graphite powder respectively to the composite powder. The microstructure, mechanical properties and friction properties of the samples were studied. The results show that the samples with nickel coated graphite powder have their wettability and the composite structure between graphite and copper alloy matrix i

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!