Relevant bibliographies by topics / : Physicochemical methods

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic ': Physicochemical methods'

Author: Grafiati
Published: 2 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic ': Physicochemical methods.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic ": Physicochemical methods"

1

Babu, B. Vijay. "COMPARATIVE PHYSICOCHEMICAL EVALUATION OF ASHWAGANDHARISTA FORMULATIONS: TRADITIONAL VS. MODERN METHODS." Global Journal of Medical and Pharmaceutical Sciences 02, no. 08 (2023): 1–7. http://dx.doi.org/10.55640/gjmps-abcd09.

Full text
Abstract:
Ashwagandharista, a traditional Ayurvedic formulation, is prepared using traditional and modern methods. This study aims to compare the physicochemical properties of Ashwagandharista formulations prepared by traditional and modern methods. Samples were collected from both traditional and modern manufacturing units. Physicochemical parameters such as pH, density, viscosity, total solid content, and ash value were evaluated according to standard procedures. The results revealed significant differences in various physicochemical parameters between the traditional and modern formulations of Ashwag
APA, Harvard, Vancouver, ISO, and other styles
2

Shapkin, N. P., V. I. Razov, I. G. Khalchenko, et al. "Modified Vermiculites Study by Various Physicochemical Methods." Applied Mechanics and Materials 752-753 (April 2015): 257–62. http://dx.doi.org/10.4028/www.scientific.net/amm.752-753.257.

Full text
Abstract:
Kovdor (Karelia) deposite vermiculites modified by acid of different concentrations and chitosan were studied using positron annihilation lifetime spectroscopy, measuring apparent density, dye adsorption, nitrogen adsorption by BET and porometry. It has been shown that after acidizing vermiculite density changes comparing to the samples’ density depending on the acid concentration. The density increases with the increasing acid concentration. Internal volume of the micropores and the value of maximum sorption of brilliant green change directly proportional to the density of the modified vermic
APA, Harvard, Vancouver, ISO, and other styles
3

Kaplun, A. B., and A. B. Meshalkin. "Oscillation methods in thermophysical and physicochemical investigations." High Temperature 48, no. 4 (2010): 527–33. http://dx.doi.org/10.1134/s0018151x10040103.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Fregert, Sigfrid. "Physicochemical Methods for Detection of Contact Allergens." Dermatologic Clinics 6, no. 1 (1988): 97–104. http://dx.doi.org/10.1016/s0733-8635(18)30695-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Il'inykh, Yu S., and Yu D. Chashechkin. "Precision methods for measuring ocean physicochemical characteristics." Measurement Techniques 36, no. 9 (1993): 1047–60. http://dx.doi.org/10.1007/bf00995803.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

ŻOŁNIERCZYK, Maciej, and Krzysztof BARBUSIŃSKI. "PHYSICOCHEMICAL METHODS OF NITRATES REMOVAL FROM WASTEWATER." Architecture, Civil Engineering, Environment 12, no. 3 (2019): 153–59. http://dx.doi.org/10.21307/acee-2019-046.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

ONO, Sôzaburo. "Development of physicochemical methods in starch science." Journal of the agricultural chemical society of Japan 61, no. 11 (1987): 1401–10. http://dx.doi.org/10.1271/nogeikagaku1924.61.1401.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zolotov, Yu A. "Physicochemical methods of analysis: What are these?" Journal of Analytical Chemistry 62, no. 10 (2007): 911. http://dx.doi.org/10.1134/s1061934807100012.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Şahinoğlu, Ercan. "Cleaning of Ultra–fine Coal by Physicochemical Methods." Afyon Kocatepe University Journal of Sciences and Engineering 18, no. 1 (2018): 315–23. http://dx.doi.org/10.5578/fmbd.66813.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Elliot, T. S. J. "Microbial Cell Surface Analysis. Structural and Physicochemical Methods." Journal of Medical Microbiology 37, no. 4 (1992): 295. http://dx.doi.org/10.1099/00222615-37-4-295.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic ": Physicochemical methods"

1

McGill, Robert Andrew. "Physicochemical measurements by gas chromatography." Thesis, University of Surrey, 1988. http://epubs.surrey.ac.uk/847792/.

Full text
Abstract:
First the method of gas-liquid chromatography (GLC) has been used to obtain partition coefficients, K, at infinite dilution on polymeric and non-polymeric phases. About 30-40 solutes were studied per stationary phase. Secondly the method of gas-solid chromatography has been used to obtain adsorption isotherms for a series of adsorbents by the technique of elution by characteristic point (ECP). A single injection of a gas or vapour suffices to obtain the isotherm, and then the limiting Henry's law constant, Kh, for adsorption at low surface coverage. About 20-30 solutes were studied per adsorbe
APA, Harvard, Vancouver, ISO, and other styles
2

O'Connell, Michael A. "New methods for the study of physicochemical processes relevant to the agrochemicals industry." Thesis, University of Warwick, 2012. http://wrap.warwick.ac.uk/56304/.

Full text
Abstract:
This thesis concerns the application of modern analytical techniques for the study of a range of systems relevant to the agrochemicals industry, with a focus on adapting and further developing these technologies to the systems of study. The major systems involved include the study of bioadhesion relevant to plant root cells and their local environment, and the further study of the root cell surface. Evanescent wave cavity ring-down spectroscopy (EW-CRDS) is the first major technique employed. For these studies a range of mimetic surfaces are designed to represent the plant cell surface and soi
APA, Harvard, Vancouver, ISO, and other styles
3

Georganopoulou, Dimtra. "Study of redox activity at modified liquid/liquid interfaces using electrochemical and physicochemical methods." Thesis, University College London (University of London), 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.268761.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Tadanier, Christopher J. "Influence of Operational Characterization Methods on DOM Physicochemical Properties and Reactivity with Aqueous Chlorine." Diss., Virginia Tech, 1998. http://hdl.handle.net/10919/40503.

Full text
Abstract:
The physicochemical properties and chemical reactivity of dissolved organic matter (DOM) are of tremendous practical significance in both natural and engineered aquatic and terrestrial systems. DOM is frequently extracted, fractionated, and concentrated from environmental samples using a variety of operationally defined physical and chemical processes in order to facilitate study of specific physicochemical properties and aspects of its chemical reactivity. This study was conducted to systematically examine the influence of operationally defined physical and chemical characterization methods
APA, Harvard, Vancouver, ISO, and other styles
5

Mabotha, Tebogo E. "The application of physicochemical methods for the analysis of small and complex pharmaceutical drugs." Master's thesis, University of Cape Town, 2003. http://hdl.handle.net/11427/6327.

Full text
Abstract:
Includes bibliographical references.<br>The application of physicochemical methods for the analysis of small and complex pharmaceutical drugs was investigated. The methods were applied to small chiral molecules and further extended to analysis of complex glycoconjugate vaccines.
APA, Harvard, Vancouver, ISO, and other styles
6

Morozzi, Pietro <1993&gt. "Innovative methods for physicochemical and dynamic characterization of ambient aerosols and other environmental systems." Doctoral thesis, Alma Mater Studiorum - Università di Bologna, 2022. http://amsdottorato.unibo.it/10061/1/Tesi_PhD_Morozzi_Pietro.pdf.

Full text
Abstract:
The present Thesis reports the main scientific achievements in my PhD research activity based on the application of multivariate statistical methods for Environmental Chemistry (academic discipline: CHIM/12) and, in particular, in the treatment of atmospheric aerosols data. During the three-year PhD period, I have faced several topics which have led to the publication of eight scientific articles including three as the first author. My publications can be conceptually grouped into three distinct parts: 1) Design and optimization of innovative experimental methodologies for the analysis of Air
APA, Harvard, Vancouver, ISO, and other styles
7

Goodyear, Simon R. "Physicochemical methods for measuring the properties of bone and their application to mouse models of disease." Thesis, University of Aberdeen, 2009. http://digitool.abdn.ac.uk:80/webclient/DeliveryManager?pid=133992.

Full text
Abstract:
This thesis describes a toolbox of complementary techniques that together measure and mechanical properties of bone. Three-point bending is used to measure the mechanical properties of bone; micro computed tomography provides cortical geometry and parameters describing trabecular bone.  The material properties, elastic modulus and density, are measured directly using ultrasound and Archimedes’ principle, while composition and bone chemistry are investigated by ashing and Raman microscopy.  These methods are used to characterise bone from the naturally occurring Gunmetal mouse and the engineere
APA, Harvard, Vancouver, ISO, and other styles
8

Li, Yingjian. "Investigation of the effects of curing and casting methods on the physicochemical properties of polymeric coating systems." Diss., University of Iowa, 2016. https://ir.uiowa.edu/etd/2239.

Full text
Abstract:
This study is to evaluate the effect of curing and casting methods on the physicochemical properties of polymeric coating systems. Aqueous-dispersion-based and organic-solvent-based Kollicoat® SR30D (poly(vinyl acetate)) and Kollicoat® MAE100P (poly(methacrylic acid-ethyl acrylate)) free films or film-coated pellets were used to evaluate the physicochemical properties resulting from different solvents and different curing treatments. Diffusion coefficients of water in organic-solvent-based films were lower than those in aqueous-dispersion-based films. Increases in curing temperature and curing
APA, Harvard, Vancouver, ISO, and other styles
9

Bai, Shujun. "Understanding physicochemical stability of proteins in solution and development of new analytical methods for freeze-dried protein formulations /." Connect to full text via ProQuest. Limited to UCD Anschutz Medical Campus, 2008.

Find full text
Abstract:
Thesis (Ph.D. in Pharmaceutical Sciences) -- University of Colorado Denver, 2008.<br>Typescript. Includes bibliographical references (leaves 134-146). Free to UCD Anschutz Medical Campus. Online version available via ProQuest Digital Dissertations;
APA, Harvard, Vancouver, ISO, and other styles
10

ROCHA, RENATO MOUTINHO DA. "COMPARATIVE STUDY OF MICROEMULSION AND PRECIPITATION PROCEDURES ON SNO2 SYNTHESIS AND THE INFLUENCE OF CATALYSTS PREPARATION METHODS ON THE PHYSICOCHEMICAL PROPERTIES OF COMMERCIAL OXIDES." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2009. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=32946@1.

Full text
Abstract:
PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO<br>CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO<br>Nanopartículas de dióxido de estanho foram obtidas a partir da reação de soluções aquosas de sais de estanho em sistemas de microemulsão e comparadas, em relação às suas propriedades texturais, estruturais e de condutividade elétrica, com nanopartículas do mesmo óxido obtidas pelo método convencional de precipitação. Foram realizadas alterações nos métodos utilizados a fim de se verificar a influência dos parâmetros de síntese, tais como: natureza da fase orgânica e do surfact
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic ": Physicochemical methods"

1

Hilderson, Herwig J., and Gregory B. Ralston, eds. Physicochemical Methods in the Study of Biomembranes. Springer US, 1994. http://dx.doi.org/10.1007/978-1-4615-1863-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

J, Hilderson Herwig, and Ralston Gregory B, eds. Physicochemical methods in the study of biomembranes. Plenum Press, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Nava, Mozes, ed. Microbial cell surface analysis: Structural and physicochemical methods. VCH, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Nava, Mozes, ed. Microbial cell surface analysis: Structural and physicochemical methods. VCH Publishers, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Aseev, G. G. Electrolytes, methods for calculation of the physicochemical parameters of multicomponent systems. Begell House, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Lipophilicity Symposium (3rd 2004 Swiss Federal Institute of Technology). Pharmacokinetic profiling in drug research: Biological, physicochemical, and computational strategies. Verlag Helvetica Chimica Acta, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Lipophilicity Symposium (2nd 2000 University of Lausanne). Pharmacokinetic optimization in drug research: Biological, physicochemical, and computational strategies. Verlag Helvetica Chimica Acta, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Cole, K. C. Physicochemical characterization of high-performance fibre-reinforced organic-matrix composites. Part 6. Methods for quality control of matrix chemistry. Industrial Materials Research Institute, National Research Council Canada, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Andriyanova, Mariya, Aslanli Aslanli, Nataliya Basova, et al. ORGANOPHOSPHORUS NEUROTOXINS. Publishing Center RIOR, 2020. http://dx.doi.org/10.29039/02026-5.

Full text
Abstract:
The collective monograph is devoted to discussing the history of creation, studying the properties, neutralizing and using organophosphorus neurotoxins, which include chemical warfare agents, agricultural crop protection chemical agents (herbicides and insecticides) and medicines. The monograph summarizes the results of current scientific research and new prospects for the development of this field of knowledge in the 21st century, including the use of modern physicochemical methods for experimental study and theoretical analysis of biocatalysis and its mechanisms based on molecular modeling w
APA, Harvard, Vancouver, ISO, and other styles
10

BURAK, LEANID. The influence of modern methods of processing and sterilization on the quality of fruit and vegetable raw materials and juice products. INFRA-M Academic Publishing LLC., 2024. http://dx.doi.org/10.12737/2154991.

Full text
Abstract:
The monograph is a scientific review and critical analysis of the acceptability and effectiveness of various new methods of disinfection of plant materials, the impact of modern physical and chemical processing methods on the quality and microbial safety of fruits and vegetables. The paper presents a critical scientific review of the application of thermal and non-thermal technologies in the field of juice processing over the past 10 years. A comprehensive analysis of the operating principle and influence of various technologies on the inactivation of microorganisms and enzymes, nutritional an
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic ": Physicochemical methods"

1

Dodziuk, Helena, Witold Danikiewicz, Gottfried Grabner, et al. "Other Physicochemical Methods." In Cyclodextrins and Their Complexes. Wiley-VCH Verlag GmbH & Co. KGaA, 2006. http://dx.doi.org/10.1002/3527608982.ch10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Roy, Shyamal. "Physicochemical Pretreatments." In Pre-Treatment Methods of Lignocellulosic Biomass for Biofuel Production. CRC Press, 2021. http://dx.doi.org/10.1201/9781003203414-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Dearden, John C. "Prediction of Physicochemical Properties." In Methods in Molecular Biology. Humana Press, 2012. http://dx.doi.org/10.1007/978-1-62703-050-2_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Breznak, John A., and Ralph N. Costilow. "Physicochemical Factors in Growth." In Methods for General and Molecular Microbiology. ASM Press, 2014. http://dx.doi.org/10.1128/9781555817497.ch14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Antimisiaris, Sophia G., and Panayiotis V. Ioannou. "Arsonoliposomes: Preparation and Physicochemical Characterization." In Methods in Molecular Biology. Humana Press, 2009. http://dx.doi.org/10.1007/978-1-60327-360-2_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Brancier, Jeanne, Amandine Courte, Dominique Todisco, and Michel Brossard. "Physicochemical Analysis of Neotropical Soils." In Methods in Historical Ecology. Routledge, 2020. http://dx.doi.org/10.4324/9780429060175-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Fisk, Lilia, Nigel Greene, and Russ Naven. "Physicochemical Properties and Structural Alerts." In Methods in Pharmacology and Toxicology. Springer New York, 2018. http://dx.doi.org/10.1007/978-1-4939-7677-5_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Noel, T. R., S. G. Ring, and M. A. Whittam. "Physicochemical Analysis of Wheat Starch." In Modern Methods of Plant Analysis. Springer Berlin Heidelberg, 1992. http://dx.doi.org/10.1007/978-3-662-01639-8_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Waterbeemd, Han. "Physicochemical concepts in drug design." In Modern Methods of Drug Discovery. Birkhäuser Basel, 2003. http://dx.doi.org/10.1007/978-3-0348-7997-2_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Reddy, K. R., M. W. Clark, R. D. DeLaune, and M. Kongchum. "Physicochemical Characterization of Wetland Soils." In Methods in Biogeochemistry of Wetlands. American Society of Agronomy and Soil Science Society of America, 2015. http://dx.doi.org/10.2136/sssabookser10.c3.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic ": Physicochemical methods"

1

Lee, Jaewook, Ethan Errington, and Miao Guo. "A White-Box AI Framework for Interpretable Global Warming Potential Prediction." In The 35th European Symposium on Computer Aided Process Engineering. PSE Press, 2025. https://doi.org/10.69997/sct.177555.

Full text
Abstract:
Accurate yet interpretable prediction of Global Warming Potential (GWP) is essential for the sustainable design of chemical products and processes. However, existing studies that utilize molecular structure and physicochemical properties for GWP prediction often suffer from low interpretability, relying on black-box models that obscure the underlying relationships between molecular descriptors and environmental impact. To address this limitation, this study employs a Kolmogorov�Arnold Network (KAN) to derive symbolic equations that establish explicit relationships between molecular properties
APA, Harvard, Vancouver, ISO, and other styles
2

Rãdulescu, M., I. Pîrvan, A. Dinu, M. Fulger, and C. Anghel. "Chemistry of the Secondary Circuit Reflected in the Physicochemical Characteristics of the Filmed Carbon Steel Components." In CORROSION 2002. NACE International, 2002. https://doi.org/10.5006/c2002-02527.

Full text
Abstract:
Abstract The aim of this paper is to establish some correlations between the characteristics of the superficial films formed on the carbon steel components in some operation conditions of a secondary circuit from Nuclear Power Station (NPS) and the specific parameters of the aqueous environment in which these films were formed. The main parameters studied in this paper, specific to a secondary circuit environment, are: the value of pH and the substances used to regulate it and implicitly the oxygen concentration dissolved in the aqueous environment. The physicochemical characteristics of the f
APA, Harvard, Vancouver, ISO, and other styles
3

Shcheklein, Sergey, Alexe� Dubinin, Andrey Matveev, and Vyacheslav Filippenkov. "AIR CONVERSION OF PYROLYSIS PRODUCTS OF HYDROCARBON RAW MATERIALS INTO SYNTHESIS GAS (H2+CO) FOR THE PRODUCTION OF ELECTRICAL ENERGY USING SOLID OXIDE FUEL CELLS." In 24th SGEM International Multidisciplinary Scientific GeoConference 24. STEF92 Technology, 2024. https://doi.org/10.5593/sgem2024/4.1/s18.31.

Full text
Abstract:
The paper presents a medium-temperature modular pyrolysis plant generating electricity from syngas (SG) produced by air conversion of pyrolysis liquid and fed into the electrochemical generator (ECG) battery. Electric output of the plant and district water heater is 100 kW and 126 kW, respectively. The main power characteristics of the plant are determined by physicochemical modeling and energy budgeting methods. Specific consumption of pyrolysis liquid to produce electricity and heat is shown as 108 g/kW�h (169 gsf/(kW�h)) and 30 kg/GJ (197 kgsf/Gcal), respectively. Fuel utilization factor is
APA, Harvard, Vancouver, ISO, and other styles
4

Salgado, I. Carrillo. "Corrosion by Elemental Sulphur Deposition in Natural Gas Transmission Systems." In CONFERENCE 2024. AMPP, 2024. https://doi.org/10.5006/c2024-20918.

Full text
Abstract:
Abstract The presence of orthorhombic elemental sulfur in a natural gas transmission system was detected. Different dust samples were taken from strainers and skids of a fuel gas turbomachinery. The presence of sulfur could cause corrosion problems and damage to the internal combustion system of a turbine. Characterization analyses were conducted to identify the principles and mechanisms associated with the formation and deposition of elemental sulfur in natural gas transmission and related equipment. Scanning electron microscopy / energy dispersive spectroscopy, X-ray fluorescence, and X-ray
APA, Harvard, Vancouver, ISO, and other styles
5

Salgado, Irene Carrillo, Jorge Cantó Ibáñez, Paul Gomez Font, and Carlos Alberto Reyes. "Failure Analysis of Localized Corrosion in Sour Environments in Discharge Lines of Hydrocarbon Wells." In CORROSION 2015. NACE International, 2015. https://doi.org/10.5006/c2015-06137.

Full text
Abstract:
Abstract The production and transport of sour oil and gas always imply a risk of material damage and shutdown due to CO2/H2S corrosion, especially localized co rrosion attack. In sour systems, the localized corrosion of carbon steel has become a progressively greater concern to the oil and gas industry as a result of production from increasingly H2S environments. The increased knowledge of localized corrosion mechanisms is necessary to develop efficient methods for prediction and mitigation. This paper describes a case history of a pipeline failure that resulted in a leak in a discharge line f
APA, Harvard, Vancouver, ISO, and other styles
6

Lu, Sicheng, Chen Xu, Qiong Lin, Yicong Gao, and Zhiliang He. "RustGAN: A method to generate rusty screw with physicochemical constraints." In 2024 International Conference on Advanced Mechatronic Systems (ICAMechS). IEEE, 2024. https://doi.org/10.1109/icamechs63130.2024.10818721.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Mikheeva, A. A., and Yu A. Nifontov. "Physicochemical methods of coal ash removal." In Актуальные проблемы морской энергетики. федеральное государственное бюджетное образовательное учреждение высшего образования "Санкт-Петербургский государственный морской технический университет", 2022. http://dx.doi.org/10.52899/9785883036322_325_329.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Sirbu, Rodica. "CONTROL OF BENZODIAZEPINES TESTED THROUGH MODERN PHYSICOCHEMICAL METHODS." In 2nd International Multidisciplinary Scientific Conference on Social Sciences and Arts SGEM2015. Stef92 Technology, 2015. http://dx.doi.org/10.5593/sgemsocial2015/b11/s2.047.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kašička, Václav, Dušan Koval, Veronika Šolínová, Petra Sázelová, and Zdeněk Prusík. "Physicochemical characterization of peptides and proteins by capillary electromigration methods." In IXth Conference Biologically Active Peptides. Institute of Organic Chemistry and Biochemistry, Academy of Sciences of the Czech Republic, 2005. http://dx.doi.org/10.1135/css200508036.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Sandoval Torres, S., L. Reyes López, L. Méndez Lagunas, J. Rodríguez Ramírez, and G. Barriada Bernal. "Physicochemical characterization of mesquite flours." In 21st International Drying Symposium. Universitat Politècnica València, 2018. http://dx.doi.org/10.4995/ids2018.2018.7707.

Full text
Abstract:
Ethnic foods are healthy products interesting for the new societies. Mesquite flour offers another option for making gluten-free recipes as part of a diet for people with celiac disease. The physicochemical properties of mesquite flours (Prosopis laevigata) were characterized. The mesquite pods were dried at 60°C, 15% RH and 2 m/s airflow; then a grinding and sieving process were applied. The nutritional composition and the sorption isotherms were obtained at 30, 35, 40 and 45°C for water activities of 0.07-0.9. The particle-size distribution, morphology and thermal stability of the flours wer
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic ": Physicochemical methods"

1

Sokolov, Alexander. Modern Integrated Methods of Reagent-Free Liquid Treatment. Intellectual Archive, 2025. https://doi.org/10.32370/iaj.3262.

Full text
Abstract:
The article presents a new approach to reagent-free liquid treatment systems based on resonance diagnostics and adaptive control technologies. The author discusses the integration of non-contact, sensor-based methods for monitoring the physicochemical parameters of liquids in real time, applicable in water purification, industrial processing, and environmental safety. The system described utilizes intelligent algorithms to detect impurities, adjust treatment protocols, and ensure high accuracy without chemical reagents.
APA, Harvard, Vancouver, ISO, and other styles
2

Chutimaworapan, Suchada. Fast release solid dispersion system of nifedipine. Chulalongkorn University, 1999. https://doi.org/10.58837/chula.res.1999.28.

Full text
Abstract:
Nifedupine solid dispersions in polyethylene glycols (PEG4000 and PEG6000), poloxamers (poloxamer188 poloxamer288 and poloxamer407), [beta]-cyclodextrin (BCD) and 2-hydroxypropyl-[beta]-cyclodextrin (HPBCD), at the drug:carrier ratio if 1:1, 1:3, 1:5, and 1:10 were investigated. The systems were prepared by melting, solvent and kneading method and compared to physical mixtures. It was found that the drug:carrier ratio of 1:10 and by melting and solvent methods showed most conspicuous dissolution rates in most systems (p&lt;0.05). The most markedly improved rate was exhibited from the poloxamer
APA, Harvard, Vancouver, ISO, and other styles
3

Schelter, Eric. A Physicochemical Method for Separating Rare Earths: Addressing an Impending Shortfall. Office of Scientific and Technical Information (OSTI), 2017. http://dx.doi.org/10.2172/1346741.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Azzi, Elias S., Cecilia Sundberg, Helena Söderqvist, Tom Källgren, Harald Cederlund, and Haichao Li. Guidelines for estimation of biochar durability : Background report. Department of Energy and Technology, Swedish University of Agricultural Sciences, 2023. http://dx.doi.org/10.54612/a.lkbuavb9qc.

Full text
Abstract:
Biochar is produced by heating biomass in the total or partial absence of oxygen. This report addresses the long-term persistence of biochar in soil and how this can be managed in climate calculations and reporting. The report consists of this summary and four chapters, which can be read independently. Different terms have been used to describe the durability of biochar carbon storage, but also the physical presence of biochar in soils, e.g. persistence, permanence, recalcitrance, residence times, stability. Today, the term “durability of carbon storage” is preferred in policy contexts, but va
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic ': Physicochemical methods' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography