Log in

Relevant bibliographies by topics / Piezoelectric rings

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers

Academic literature on the topic 'Piezoelectric rings'

Author: Grafiati

Published: 3 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Piezoelectric rings.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Piezoelectric rings"

1

Fuentes Cruz, Martín, Pedro Acevedo Contla, D. Fabián García Nocetti, Adalberto Joel Durán Ortega, and Eduardo R. Moreno Hernández. "Estudio de la respuesta en frecuencia de la impedancia eléctrica en modo radial en anillos piezoeléctricos PZT-4 con fracturas." Revista de Investigación en Tecnologías de la Información 13, no. 29 (2025): 50–59. https://doi.org/10.36825/riti.13.29.005.

Full text

Abstract:

Power ultrasonic transducers in industrial applications typically use Langevin-type transducers with PZT-4 piezoelectric rings. These piezoelectric rings are subjected to mechanical vibrations that fracture them. This paper describes a study of the radial mode frequency responses of fractures in piezoelectric ring-shaped elements. Four PZT-4 piezoelectric rings were used for this study. Ring 1 was preserved complete without alterations and the other 3 rings had slots of 1.0, 2.5 and 5.0 mm, respectively. Simulations were performed using Ansys Mechanical software, as well as the corresponding i

APA, Harvard, Vancouver, ISO, and other styles

2

Xiang, Wang, Wan Ping Chen, Wen Chao You, Helen Lai Wah Chan, and Long Tu Li. "Degradation of Lead Zirconate Titanate Piezoelectric Ceramics Induced by Water and AC Voltages." Key Engineering Materials 336-338 (April 2007): 367–70. http://dx.doi.org/10.4028/www.scientific.net/kem.336-338.367.

Full text

Abstract:

A comparison experiment was conducted in which some lead zirconate titanate (PZT) piezoelectric ceramic rings were simply immersed in a 0.01 M NaOH solution while other PZT rings were immersed in the solution with a 50 Hz AC voltage applied between the electrodes of the rings and a counter electrode in the solution. Though the simple immersion showed no noticeable influence on the PZT rings, those PZT rings treated with the application of the AC voltage were obviously degraded in their piezoelectric properties. It was proposed that the degradation resulted from the collaborated reactions of at

APA, Harvard, Vancouver, ISO, and other styles

3

Jūrėnas, Vytautas, Gražvydas Kazokaitis, and Dalius Mažeika. "3DOF Ultrasonic Motor with Two Piezoelectric Rings." Sensors 20, no. 3 (2020): 834. http://dx.doi.org/10.3390/s20030834.

Full text

Abstract:

A novel design of a multiple degrees of freedom (multi-DOF) piezoelectric ultrasonic motor (USM) is presented in the paper. The main idea of the motor design is to combine the magnetic sphere type rotor and two oppositely placed ring-shaped piezoelectric actuators into one mechanism. Such a structure increases impact force and allows rotation of the sphere with higher torque. The main purpose of USM development was to design a motor for attitude control systems used in small satellites. A permanent magnetic sphere with a magnetic dipole is used for orientation and positioning when the sphere i

APA, Harvard, Vancouver, ISO, and other styles

4

Hu, Jiuling, Lianjin Hong, Lili Yin, Yu Lan, Hao Sun, and Rongzhen Guo. "Research and Fabrication of Broadband Ring Flextensional Underwater Transducer." Sensors 21, no. 4 (2021): 1548. http://dx.doi.org/10.3390/s21041548.

Full text

Abstract:

At present, high-speed underwater acoustic communication requires underwater transducers with the characteristics of low frequency and broadband. The low-frequency transducers also are expected to be low-frequency directional for realization of point-to-point communication. In order to achieve the above targets, this paper proposes a new type of flextensional transducer which is constructed of double mosaic piezoelectric ceramic rings and spherical cap metal shells. The transducer realizes broadband transmission by means of the coupling between radial vibration of the piezoelectric rings and h

APA, Harvard, Vancouver, ISO, and other styles

5

Engelke, Diana, Bernd Oehme, and Jens Strackeljan. "A Novel Drive Option for Piezoelectric Ultrasonic Transducers." Modelling and Simulation in Engineering 2011 (2011): 1–6. http://dx.doi.org/10.1155/2011/910876.

Full text

Abstract:

This paper concentrates on ultrasonic transducers, which are driven by piezoelectric ceramic rings that are arranged in a stack. A novel drive option, where the stack contains a new type of divided piezoelectric rings, is analyzed using the finite element method, prototyped, and tested. To gain a better sense of the vibration behavior, the studies focus initially on one ring and subsequently on the different possibilities to assemble the transducer. The investigations point out that natural bending frequencies can be excited at the transducer. Thus, multiple vibration directions of the tip can

APA, Harvard, Vancouver, ISO, and other styles

6

Ramesh, R., and D. D. Ebenezer. "Analysis of Axially Polarized Piezoelectric Ceramic Rings." Ferroelectrics 323, no. 1 (2005): 17–23. http://dx.doi.org/10.1080/00150190500308454.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Tzou, H. S., J. P. Zhong, and M. Natori. "Sensor Mechanics of Distributed Shell Convolving Sensors Applied to Flexible Rings." Journal of Vibration and Acoustics 115, no. 1 (1993): 40–46. http://dx.doi.org/10.1115/1.2930312.

Full text

Abstract:

Observation spillover can introduce system instability to undamped distributed structural systems. This problem can be prevented via modal filtering using distributed piezoelectric modal sensors which are spatially shaped and convoluted such that they are only sensitive to specific modal mode(s). In this paper, detailed electro-mechanics—sensor mechanics—of spatially distributed piezoelectric shell convolving sensors are analyzed and results presented. It is observed that sensor sensitivity can be classified into two components: (1) the transverse modal sensitivity and (2) the membrane modal s

APA, Harvard, Vancouver, ISO, and other styles

8

FINIZIO, S., M. FOERSTER, C. A. F. VAZ, et al. "ELECTRICAL-FIELD CONTROL OF MAGNETISM MEDIATED BY STRAIN IN Ni NANOSTRUCTURES FABRICATED ON PRE-POLED PMN–PT (011)." SPIN 03, no. 03 (2013): 1340008. http://dx.doi.org/10.1142/s2010324713400080.

Full text

Abstract:

We investigate the effects of piezoelectric-generated strain on the magnetization configuration of Ni nanostructures fabricated on pre-poled piezoelectric (011) [ Pb ( Mg 0.33 Nb 0.66) O 3]0.68–[ PbTiO 3]0.32 (PMN–PT) by high resolution X-ray microscopy. We observe a strong uniaxial anisotropy in the Ni nanostructures, due to the relaxation of the substrate following the deposition of the Ni . The anisotropy can be modified by the application of an electric field to the piezoelectric substrate (thus generating a piezoelectric strain in the system) through the magneto-elastic effect. By applyin

APA, Harvard, Vancouver, ISO, and other styles

9

Chen, Jung-San, Yen-Hsin Lo, and Yu-Siang Huang. "Torsional wave suppression in metashaft with shunted piezoelectric rings." AIP Advances 12, no. 1 (2022): 015221. http://dx.doi.org/10.1063/5.0076336.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Shen, Ji Y., Meldon Human, Lonnie Sharpe Jr, and James T. S. Wang. "Alleviation of Deformation of Cylindrical Shell Using Piezoelectric Rings." Journal of Aerospace Engineering 12, no. 3 (1999): 92–97. http://dx.doi.org/10.1061/(asce)0893-1321(1999)12:3(92).

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Piezoelectric rings"

1

Lin, Ching-Yu 1972. "Pressure estimation of piezoelectric rings embedded orthogonally in cynlindrical shells." Thesis, Massachusetts Institute of Technology, 1998. http://hdl.handle.net/1721.1/50320.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Tay, Tiong Beng, Steven R. Baker, Ronald J. Pieper, and O. B. (Oscar Bryan) Wilson. "Numerical modeling of a free-flooded piezoelectric ring sonar transducer." Thesis, Monterey, California. Naval Postgraduate School, 1993. http://hdl.handle.net/10945/24204.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Bazilo, C. V. "Mathematical modelling of disk piezoelectric transformer with ring electrode in primary electrical circuit." Thesis, Sumy State University, 2017. http://essuir.sumdu.edu.ua/handle/123456789/65602.

Full text

Abstract:

In most papers the described methods of piezoelectric transformers models constructing are mostly based on the use of equivalent electrical circuits and it does not allow analyzing of stress-strain state of solids with the piezoelectric effects. In this work, using the simplest example of axially symmetric radial oscillations of the piezoelectric disk the principles of mathematical models constructing that are sufficiently adequate to real devices and occurring physical processes are set out.

APA, Harvard, Vancouver, ISO, and other styles

4

Diorio, Nicholas John Jr. "From Synthesis to Piezoelectric Studies of Central-Ring-Substituted Bent-Core Liquid Crystals and Their Composites." Kent State University / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=kent1375098839.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Bertin, Michael. "Piezoelectric actuation of an aero engine fuel metering valve." Thesis, University of Bath, 2017. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.723329.

Full text

Abstract:

Servo valves are used in a broad variety of flow modulation applications. In the field of aerospace, servo valves are used in aero engines to meter fuel flow. The existing valves are labour intensive to manufacture and highly optimised such that to achieve improvements in performance requires a novel design. This research investigates smart material actuators and valve concepts. Specifically, a prototype pilot stage nozzle flapper valve is developed for the purpose of actuating a main stage spool. The typical nozzle flapper type servo valve uses a torque motor to actuate the flapper. In this r

APA, Harvard, Vancouver, ISO, and other styles

6

Tamburrano, Paolo, Andrew R. Plummer, Palma Pietro De, Elia Distaso, and Riccardo Amirante. "Experimental and numerical study of a novel piezoelectric pilot stage for servovalves." Technische Universität Dresden, 2020. https://tud.qucosa.de/id/qucosa%3A71259.

Full text

Abstract:

Two - stage servovalves, despite being widely used in aircraft and industry because of their reliability and high performance, have a few disadvantages that are still unsolved at the state of the art, such as the power consumption caused by the quiescent flow (internal leakage) in the pilot stage, and the complexity and high number of parts of the torque motor assembly of the pilot stage. The solution to these problems can help to reduce costs, weight, power consumption, and to enhance the reliability and producibility as well as the performance of these valves. This paper presents a novel con

APA, Harvard, Vancouver, ISO, and other styles

7

Diab, Daher. "Capteur acoustique sphérique autonome : étude du dispositif de récupération d'énergie vibratoire." Thesis, Valenciennes, 2017. http://www.theses.fr/2017VALE0037/document.

Full text

Abstract:

Un nouveau capteur acoustique sphérique autonome est proposé. Il est destiné à être immergé dans un milieu liquide ou pâteux pour mesurer certaines propriétés physiques du milieu et récupérer l'énergie vibratoire ambiante pour assurer son autonomie. Le capteur est composé de deux coquilles hémisphériques en plexiglas et d'une bague piézoélectrique en PZ26 fixée entre les deux coquilles. Cette structure peut être utilisée aussi bien en excitateur que capteur. Un modèle de simulation de la récupération d'énergie vibratoire a été développé en considérant seulement deux modes de vibration: mode ép

APA, Harvard, Vancouver, ISO, and other styles

8

Bossut, Régis. "Modélisation de transducteurs piézoélectriques annulaires immergés par la méthode des éléments finis." Valenciennes, 1985. https://ged.uphf.fr/nuxeo/site/esupversions/39364c80-50ea-4a42-9b4a-6380d9ebefdd.

Full text

Abstract:

Application de la méthode des élements finis a l'analyse des modes propres d'anneaux de céramique piézoélectrique et du rayonnement acoustique d'un ou de plusieurs anneaux identiques coaxiaux immergés, est décrite. L'objectif poursuivi est double : déterminer l'évolution des divers modes de résonance d'un anneau libre en fonction de ses dimensions, et décrire de façon précise le fonctionnement de ce transducteur lorsqu'il rayonne dans l'eau, afin d'interpréter correctement les réusltats expérimentaux disponibles.

APA, Harvard, Vancouver, ISO, and other styles

9

Soliman, Nancy Ahmed. "Modification et validation de la technique de l'anneau piézoélectrique pour mesurer la prise et le durcissement des matériaux à base de ciment." Mémoire, Université de Sherbrooke, 2010. http://savoirs.usherbrooke.ca/handle/11143/1575.

Full text

Abstract:

A period of cement hydration is one of critical in the life span of concrete structures. One of the reasons of collapse of concrete structural elements during and after construction is the error in determining the concrete characteristics at early age. Recently, non-destructive test emerged as a popular way to evaluate the properties of cement-based materials. This test offers continuous measurements of concrete properties as well as ability to monitor any changes in the current state of structural materials. In the existing research, some of these methods fail to capture well properties of th

APA, Harvard, Vancouver, ISO, and other styles

10

Chia, Hsiang chang, and 張家祥. "A Study of Ring-type Piezoelectric Transformers." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/14234929630257871095.

Full text

Abstract:

碩士<br>國立高雄應用科技大學<br>機械與精密工程研究所<br>97<br>This study describes electromechanical analysis of a ring-type piezoelectric transformer, which is operating on the radial mode. The piezoelectric transformer is designed by the geometrical shape, the dimensions, the polarization direction, the direction of external electric field, and the electric electrodes. In this study, the resonant frequency equations for the piezoelectric transformers are derived,and the mode shapes for the piezoelectric rings are also obtained. In addition, finite element analysis method is also used to verify the theoretical res

APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Piezoelectric rings"

1

Tay, Tiong Beng. Numerical modeling of a free-flooded piezoelectric ring sonar transducer. Naval Postgraduate School, 1993.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Piezoelectric rings"

1

Tzou, H. S. "Convolving Shell Sensors and Actuators Applied to Rings." In Piezoelectric Shells. Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-011-1783-8_8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Tzou, Hornsen. "Convolving Shell Sensors and Actuators Applied to Rings." In Piezoelectric Shells. Springer Netherlands, 2018. http://dx.doi.org/10.1007/978-94-024-1258-1_8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Shariar, Md Hasan, Yu Xiao, Nan Wu, and Xihui Liang. "Energy Harvesting Using Piezoelectric Transducer Ring from Rolling Motion of Ball Bearing." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2025. https://doi.org/10.1007/978-981-96-1191-1_28.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Yas, M. H., Morteza Shakeri, and M. R. Saviz. "Elasticity Solution of Laminated Cylindrical Shell with Piezoelectric Layer under Local Ring Load." In Advances in Composite Materials and Structures. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-427-8.917.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

"Piezoelectric Rings." In The Mechanics of Piezoelectric Structures. WORLD SCIENTIFIC, 2006. http://dx.doi.org/10.1142/9789812774057_0007.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Ahmad Saeed, Alnuaim Ahmed M., and El Naggar M. Hesham. "Dynamic Shear Modulus of Kaolin-Silt Clay Using a Novel Technique." In Advances in Soil Mechanics and Geotechnical Engineering. IOS Press, 2015. https://doi.org/10.3233/978-1-61499-601-9-331.

Full text

Abstract:

An artificial/reconstituted clay was prepared by mixing kaolin (K) and silt (S) in the proportion of 50% kaolin and 50% silt by weight employing a slurry deposition technique. The K-S clay has been used extensively to simulate natural clays for geotechnical centrifuge testing, often involving dynamic loading. It is necessary to accurately measure the soil shear wave velocity (Vs) or the low-strain shear modulus (Gmax&thinsp;) for the analysis of geotechnical problems involving dynamic loading. In this study, Vsand Gmax&thinsp;of K-S clay were measured using a novel device, utilizing pi

APA, Harvard, Vancouver, ISO, and other styles

7

Ho, Shine-Tzong. "Electromechanical Analysis of a Ring-type Piezoelectric Transformer." In Mechatronic Systems Simulation Modeling and Control. InTech, 2010. http://dx.doi.org/10.5772/9134.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Piezoelectric rings"

1

Shi, Xiang, Fuyu Zhou, Liang Wu, and Qunli An. "Design and Torque Analysis of a Lead-Free Piezoelectric Ring-Shaped Traveling Wave Ultrasonic Motor." In 2025 6th International Conference on Mechatronics Technology and Intelligent Manufacturing (ICMTIM). IEEE, 2025. https://doi.org/10.1109/icmtim65484.2025.11041459.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Lin, Hung-Yu, Hao-Chien Cheng, Mingching Wu, Jerwei Hsieh, Mei-Feng Lai, and Weileun Fang. "Scan-Angle Enhancement of Quasi-Static Piezoelectric Mems Mirror by Multiple Ring-Shaped Design and Cross-Electrode Arrangement." In 2025 IEEE 38th International Conference on Micro Electro Mechanical Systems (MEMS). IEEE, 2025. https://doi.org/10.1109/mems61431.2025.10917521.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Vigevani, Gabriele, David R. Myers, and Albert P. Pisano. "Piezo Thermoelastic Model for Quality Factor Optimization of Resonant Rings." In ASME 2010 International Mechanical Engineering Congress and Exposition. ASMEDC, 2010. http://dx.doi.org/10.1115/imece2010-39944.

Full text

Abstract:

In this work an analytical model for the computation of thermoelastic losses for piezoelectric resonant rings vibrating in flexural mode is presented. The analytical model is based on the classic dynamic balance equations for ring structures [1] and considers the constitutive equations for piezoelectric and pyroelectric materials. The approximations of this work are based on the recent analysis for thermoelastic beams by Lifshitz and Roukes [6] and its application to isotropic rings in [10] and [11]. This work shows that for isotropic thermoelastic materials the ultimate Q-factor is determined

APA, Harvard, Vancouver, ISO, and other styles

4

Chang, Shuo-Hung, and Jann-Fang Lin. "Computer Aided Design of Piezoelectric/Elastic Trimorph Ring Actuator." In ASME 1999 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/detc99/dac-8630.

Full text

Abstract:

Abstract The Kirchoff-Love plate theory and electroelasticity theory are combined to formulate the computer aided design model for the trimorph ring actuators. An isotropic elastic ring is laminated between two identical piezoelectric rings to form the trimorph actuator. The inner surface of the actuator is fixed, and the outer surface is free or transversely load. The analytical solutions for the transverse displacement and the force distribution are derived. Numerical simulations for the transverse displacement under free and loaded boundary conditions are conducted. The maximum transverse d

APA, Harvard, Vancouver, ISO, and other styles

5

Tzou, H. S., and J. P. Zhong. "Sensor Mechanics of Distributed Shell Convolving Sensors Applied to Flexible Rings." In ASME 1991 Design Technical Conferences. American Society of Mechanical Engineers, 1991. http://dx.doi.org/10.1115/detc1991-0185.

Full text

Abstract:

Abstract Observation spillover can introduce system instability to undamped distributed structural systems. This problem can be prevented via modal filtering using distributed piezoelectric modal sensors which are spatially shaped and convoluted such that they are only sensitive to specific modal mode(s). In this paper, detailed electromechanics — sensor mechanics — of spatially distributed piezoelectric shell convolving sensors are analyzed and results presented. It is observed that sensor sensitivity can be classified into two components: 1) the transverse modal sensitivity and 2) the membra

APA, Harvard, Vancouver, ISO, and other styles

6

Zhang, X. F., S. D. Hu, and H. S. Tzou. "Flexoelectric Energy Harvesting of Circular Rings." In ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/detc2013-12769.

Full text

Abstract:

Flexoelectricity, the electromechanical coupling of the polarization response and strain gradient, occurs in solid crystalline dielectrics of any symmetry or asymmetric crystals. Different from the piezoelectric energy harvester, an energy harvester based on the direct flexoelectric effect is designed in this study. The energy harvester consists of an elastic ring and a flexoelectric patch laminated on its outer surface. Due to the direct flexoelectric effect, the electric energy induced by the strain gradient of the flexoelectric patch is harvested to power the electric device when the ring i

APA, Harvard, Vancouver, ISO, and other styles

7

Vo, Van, Amit Maha, and Su-Seng Pang. "Stress Optimization of a Piezoelectric-Controlled Curved Beam." In ASME 2012 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/pvp2012-78366.

Full text

Abstract:

A composite curved beam is used to represent a multitude of structures in piping, such as O-Rings, that undergo dynamic warping as a result of long term usage, thermal changes, and high pressures. A piezoelectric material can be used to design an auto-corrective process that senses the dynamic warping and induces forces to restore the shape through the Piezoelectric Effect. The orientation and placement of the piezoelectric material on a composite curved beam directly affects the deflection and stress applied to that beam. The optimal placement of the actuator in terms of these two factors was

APA, Harvard, Vancouver, ISO, and other styles

8

Rozen, Ofer, Scott T. Block, Stefon E. Shelton, and David A. Horsley. "Piezoelectric micromachined ultrasonic transducer with increased output pressure via concentric venting rings." In TRANSDUCERS 2015 - 2015 18th International Solid-State Sensors, Actuators and Microsystems Conference. IEEE, 2015. http://dx.doi.org/10.1109/transducers.2015.7181012.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Maha, Amit, and Su-Seng Pang. "Shape Recovery Model of a Curved Beam Using Piezoelectric Actuation." In ASME 2012 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/pvp2012-78382.

Full text

Abstract:

A thin composite curved beam under external loading is used to simulate different structures such as pressurized pipes, O-Rings etc. These products can undergo dynamic shape change and warping. A piezoelectric actuator is to be used to design for thin curved structures. Simple thin quarter circular beam geometry is analyzed with external loading at the free end. The orientation and placement of the piezoelectric material on a composite curved beam directly affects the deflection and stress applied to that beam. The optimal placement for an actuator for shape recovery was estimated.

APA, Harvard, Vancouver, ISO, and other styles

10

Popal, Abdul Q., Ranjith D. Janardhana, Fazli Akram, and Nathan Jackson. "Comparison of Electrode Configuration for (0,2) Piezoelectric Micromachined Ultrasound Transducer." In ASME 2024 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2024. https://doi.org/10.1115/imece2024-145319.

Full text

Abstract:

Abstract Piezoelectric micromachined ultrasound transducers (PMUT) have been extensively used in numerous applications. Most PMUT applications operate in the first mode (0,1), and extensive investigation into the effects of the electrode design on performance have been previously investigated. However, specific applications such as atomizers or biosensors can operate in higher modes such as (0,2) and (0,3), but the effects of electrode configuration on these modes are limited. This study focuses on optimizing the electrode configuration of higher-order PMUT devices. The (0,2) and (0,3) modes a

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!