Academic literature on the topic 'Planar perovskites solar cells'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Planar perovskites solar cells.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Planar perovskites solar cells":
Turren-Cruz, Silver-Hamill, Anders Hagfeldt, and Michael Saliba. "Methylammonium-free, high-performance, and stable perovskite solar cells on a planar architecture." Science 362, no. 6413 (October 11, 2018): 449–53. http://dx.doi.org/10.1126/science.aat3583.
Wang, Deng, Wenjing Li, Zhenbo Du, Guodong Li, Weihai Sun, Jihuai Wu, and Zhang Lan. "CoBr2-doping-induced efficiency improvement of CsPbBr3 planar perovskite solar cells." Journal of Materials Chemistry C 8, no. 5 (2020): 1649–55. http://dx.doi.org/10.1039/c9tc05679c.
Liang, Jingjing, Chunjun Liang, Huimin Zhang, Mengjie Sun, Hong Liu, Chao Ji, Xuewen Zhang, Dan Li, and Zhiqun He. "CH3NH3I post-treatment improves the performance of perovskite solar cells via eliminating the impure phases." Functional Materials Letters 10, no. 04 (August 2017): 1750049. http://dx.doi.org/10.1142/s1793604717500497.
Fan, Ping, Huan-Xin Peng, Zhuang-Hao Zheng, Zi-Hang Chen, Shi-Jie Tan, Xing-Ye Chen, Yan-Di Luo, Zheng-Hua Su, Jing-Ting Luo, and Guang-Xing Liang. "Single-Source Vapor-Deposited Cs2AgBiBr6 Thin Films for Lead-Free Perovskite Solar Cells." Nanomaterials 9, no. 12 (December 11, 2019): 1760. http://dx.doi.org/10.3390/nano9121760.
Ogundana, I. J., and S. Y. Foo. "Improving the Morphology of the Perovskite Absorber Layer in Hybrid Organic/Inorganic Halide Perovskite MAPbI3 Solar Cells." Journal of Solar Energy 2017 (May 3, 2017): 1–9. http://dx.doi.org/10.1155/2017/8549847.
Chang, Jingjing, Hai Zhu, Juanxiu Xiao, Furkan Halis Isikgor, Zhenhua Lin, Yue Hao, Kaiyang Zeng, Qing-Hua Xu, and Jianyong Ouyang. "Enhancing the planar heterojunction perovskite solar cell performance through tuning the precursor ratio." Journal of Materials Chemistry A 4, no. 20 (2016): 7943–49. http://dx.doi.org/10.1039/c6ta00679e.
Ivanova, A., A. Tokmakov, K. Lebedeva, M. Roze, and I. Kaulachs. "Influence of the Preparation Method on Planar Perovskite CH3NH3PbI3-xClx Solar Cell Performance and Hysteresis." Latvian Journal of Physics and Technical Sciences 54, no. 4 (August 1, 2017): 58–68. http://dx.doi.org/10.1515/lpts-2017-0027.
WANG, JINFENG, BENGUANG ZHAO, LEI ZHU, and JIAN SONG. "THE ROLE OF Br AS DOPANT ON THE STRUCTURAL AND CHARGE TRANSPORT PROPERTIES IN CH3NH3PbI3−x−yBrxCly MIXED-HALIDE PEROVSKITE FOR HYBRID SOLAR CELLS." Surface Review and Letters 26, no. 02 (February 2019): 1850137. http://dx.doi.org/10.1142/s0218625x18501378.
Pantaler, Martina, Christian Fettkenhauer, Hoang L. Nguyen, Irina Anusca, and Doru C. Lupascu. "Deposition routes of Cs2AgBiBr6 double perovskites for photovoltaic applications." MRS Advances 3, no. 32 (2018): 1819–23. http://dx.doi.org/10.1557/adv.2018.151.
Bidikoudi, Maria, and Emmanuel Kymakis. "Novel approaches and scalability prospects of copper based hole transporting materials for planar perovskite solar cells." Journal of Materials Chemistry C 7, no. 44 (2019): 13680–708. http://dx.doi.org/10.1039/c9tc04009a.
Dissertations / Theses on the topic "Planar perovskites solar cells":
Liu, Guoduan. "Fabrication and Characterization of Planar-Structure Perovskite Solar Cells." UKnowledge, 2019. https://uknowledge.uky.edu/ece_etds/137.
Ngqoloda, Siphelo. "Hybrid lead halide perovskite thin films and solar cells by chemical vapour deposition." University of the Western Cape, 2021. http://hdl.handle.net/11394/8344.
The organic-inorganic hybrid perovskites such as methyl ammonium lead iodide (MAPbI3) or mixed halide MAPbI3-xClx (x is usually very small) have emerged as an interesting class of semiconductor materials for their application in photovoltaic (PV) and other semiconducting devices. A fast rise in PCE of this material observed in just under a decade from 3.8% in 2009 to over 25.2% recently is highly unique compared to other established PV technologies such as c-Si, GaAs, and CdTe. The high efficiency of perovskites solar cells has been attributed to its excellent optical and electronic properties. Perovskites thin film solar cells are usually deposited via spin coating, vacuum thermal evaporation, and chemical vapour deposition (CVD).
Liu, Mingzhen. "Planar heterojunction perovskite solar cells via vapour deposition and solution processing." Thesis, University of Oxford, 2014. http://ora.ox.ac.uk/objects/uuid:89a275a8-5ec8-442c-a114-246a44dbd570.
Syed, Ali Asgher. "Hole extraction layer/perovskite interfacial modification for high performing inverted planar perovskite solar cells." HKBU Institutional Repository, 2018. https://repository.hkbu.edu.hk/etd_oa/553.
Fournier, Olivier Jaques Henri. "Effects of the interfaces in planar hybrid lead trihalide perovskite solar cells with n-type and p-type inorganic charge transport layers." Thesis, KTH, Energiteknik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-246122.
Perovskite solar cells are an emerging and promising thin film technology, which reached high efficiencies in an unprecedented short time. However, the current architecture of the cell, which includes titanium oxide and Spiro-OMeTAD (an organic compound) as charge transport layers (CTLs), lacks stability and shows hysteretic behavior. In order to assess these major issues, inorganic CTLs are developed in the PV community. This work performs a thorough review of the literature regarding these inorganic CTLs. Four of them are identified as good candidates because of the high performances they reached, and of their chemical stability: SnO2, ZnO, CuSCN and NiO. The significance of the interfaces in this kind of cell is also demonstrated. Numerical simulation of CTLs is also performed using a dedicated 1D modelisation tool (SCAPS), which allows us to propose key parameters to optimize in a CTL. Finally, the effects of the interface on the performances of a perovskite solar cell are studied with hyperspectral imaging of photoluminescence response of the cell. Using a proper fit algorithm, this non-destructive method gives insight into the opto-electronic properties of the perovskite grown on different substrates.
Ulfa, Maria. "Nouveaux contacts sélectifs pour des cellules à pérovskites hybrides très efficaces." Thesis, Paris Sciences et Lettres (ComUE), 2019. http://www.theses.fr/2019PSLEC005.
This thesis work aimed at realizing efficient, stable, and reproducible photovoltaic perovskite solar cells, and to achieve a good understanding of the cells functioning. In Chapter 1, we present the context of the research on solar cells and PSC components as well as a description of the main techniques employed for the device characterizations. Chapter 2 provides a comparative study of two different CH3NH3PbI3 deposition techniques (1-step and 2-step). It is clear that both of them are suitable for the preparation of PSC which resulted in more than 17% PCE. In Chapter 3, we have thoroughly studied the two main kinds of organic hole transporting materials: molecular and polymeric. We have also investigated the doping effect on these HTMs. Through impedance spectroscopy measurement, we could clearly see that doping is really important to get high efficiency for Spiro-OMeTAD cells, while the improvement was less significant in the case of P3HT cells. In Chapter 4, we have investigated several new carbazole derivatives as hole transporting materials. These molecules ranged from the big dendritic core B186 to the DMs and iDMs series with lower molecular weight. B186 and iDM1 showed the highest efficiency at 14.59% and 15.04%, respectively. In Chapter 5, we have studied a simple planar structure of PSC by incorporating a wide bandgap n-type semiconductor SnO2 as the hole blocking layer. Planar cells have been prepared using this layer combined with MAPI(1)-SOF and FAMA perovskites. With FAMA absorber, the devices were highly efficient with a maximum PCE of 18.2% and were almost hysteresis-free (6.7% HI) while, with MAPI(1)-SOF, the obtained efficiency was 15.2% with higher hysteresis
Eperon, Giles E. "Active layer control for high efficiency perovskite solar cells." Thesis, University of Oxford, 2015. https://ora.ox.ac.uk/objects/uuid:1fa78aab-7479-4fe2-8192-e1be1d12c171.
Nandayapa, Bermudez Edgar Ricardo. "Metal Halide Perovskites: Photophysics and Inkjet Printing of Solar Cells." Doctoral thesis, Humboldt-Universität zu Berlin, 2021. http://dx.doi.org/10.18452/23121.
Metal halide perovskites (MHPs) are semiconductor materials that show unique photophysical properties, making them ideal for photovoltaic applications. Having shown power conversion efficiencies of up to 25.5%, techniques are continuously being developed to push perovskites to unprecedent limits. Yet, these materials present challenges like a low stability under a variety of conditions as well as a large disparity between the efficiencies of lab scale and large area devices. This thesis addresses these two major obstacles. First, charge transfer mechanisms between MHPs and atmospheric gases were studied to determine their effect on the material stability by using photoluminescence spectroscopy. By comparing the emission of MHPs, the effect that molecular oxygen, nitrogen, argon, and water have on boundary defects in the material was studied. These quenching effects were later analyzed using the Stern-Volmer model. It was found that the gases bounce off the surface, but a portion of them bind to the MHPs, in occasions passivating defects on the crystals. Using these results, charge transfer mechanisms were proposed for each one of the gases. Second, scaling of MHP devices was examined using inkjet printing. For this, three crystallization techniques were evaluated. One of them used sequential deposition of two precursor inks, while the other two crystallized ink that was deposited in one step. Both latter techniques used low pressures, below 1 mbar, and only one of them applied a controlled stream of nitrogen to the sample. Using these techniques, the deposition of a 15x15 cm² area as well as a device with an efficiency of 16.8% on an area of 0.16 cm² were demonstrated. These results show a novel procedure to study non-radiative loss paths in MHPs to enhance their stability and performance as devices. Also, they show that inkjet printing is a favorable technology to scale MHP devices and eventually facilitate the mass production of this type of photovoltaic devices.
Gheno, Alexandre. "Printable and printed perovskites photovoltaic solar cells for autonomous sensors network." Thesis, Limoges, 2017. http://www.theses.fr/2017LIMO0108/document.
This thesis is about the design of photovoltaic solar cells based on hybrid perovskite using inkjet printing technology. The first two chapters present the context of the thesis, namely the powering of an autonomous sensor network, and review the scientific aspects of inkjet and photovoltaic technologies. The third chapter presents the development of a state-of-the-art photovoltaic cell and its evolution towards a printable architecture at low annealing temperatures. The problem of the stability of photovoltaic cells with perovskite is also discussed. The last part presents the different aspects and problems of the inkjet printing of the three inner layers of a perovskite solar cell. At the end of this work the possibility of printing perovskite solar cells with efficiencies higher than 10% has been demonstrated, all in ambient conditions and at low temperature
Marronnier, Arthur. "Anharmonicity and Instabilities in Halide Perovskites for Last Generation Solar Cells." Thesis, Université Paris-Saclay (ComUE), 2018. http://www.theses.fr/2018SACLX031/document.
Hybrid halide perovskites (ABX3) have emerged over the past five years as absorber layers for novel high-efficiency low-cost solar cells combining the advantages of organic (molecule A) and inorganic (metal B, halogen X) materials. Very recently, fully inorganic perovskite quantum dots also shown promising efficiencies, making them a potentially stable and efficient alternative to their hybrid cousins.The aim of this PhD thesis is to study and better understand both the structural and thermodynamic instabilities of these halide perovskites, with a specific focus on purely inorganic CsPbI3 structures.We first use various ab-initio techniques, the majority of which are based on Density Functional Theory (DFT) and its linear-response approach (DFPT), to investigate the vibrational and electronic properties of the different phases of CsPbI3. While the black γ-phase, crucial for photovoltaic applications, is shown to behave harmonically around equilibrium, for the other three phases frozen phonon calculations reveal a Brillouin zone center double-well instability. We also show that avoiding the order-disorder entropy term arising from these double-well instabilities is key in order to prevent the formation of the yellow perovskitoid phase, and evidence a Rashba effect when using the symmetry breaking structures obtained through frozen phonon calculations. We then analyze the structural changes and the dynamical Rashba splitting along molecular dynamics trajectories in the light of our findings.In a second phase, we investigate the thermodynamical stability of hybrid perovskite MAPbI3. Our experimental ellipsometry-based study brings better understanding of the chemical decomposition of MAPbI3 into its two precursors, methylammonium and lead iodides, which we predicted using DFT stability diagram calculations and which we confirm by X-Ray diffraction. Last, we prove that hybrid perovskite structure MAPbI3 behaves more like inorganic compounds (high dielectric constant, low exciton binding energy) than like organic materials (low dielectric constant, high exciton binding energy)
Books on the topic "Planar perovskites solar cells":
Bisquert, Juan. Physics of Solar Cells: Perovskites, Organics, and Photovoltaic Fundamentals. Taylor & Francis Group, 2017.
Bisquert, Juan. Physics of Solar Cells: Perovskites, Organics, and Photovoltaic Fundamentals. Taylor & Francis Group, 2017.
Giorgi, Giacomo, and Koichi Yamashita. Theoretical Modeling of Organohalide Perovskites for Photovoltaic Applications. Taylor & Francis Group, 2017.
Book chapters on the topic "Planar perovskites solar cells":
You, Jingbi, Lei Meng, Ziruo Hong, Gang Li, and Yang Yang. "Inverted Planar Structure of Perovskite Solar Cells." In Organic-Inorganic Halide Perovskite Photovoltaics, 307–24. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-35114-8_12.
Lee, Jin-Wook, Hui-Seon Kim, and Nam-Gyu Park. "APbI3 (A = CH3NH3 and HC(NH2)2) Perovskite Solar Cells: From Sensitization to Planar Heterojunction." In Organic-Inorganic Halide Perovskite Photovoltaics, 223–53. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-35114-8_9.
Fu, Kunwu, Anita Wing Yi Ho-Baillie, Hemant Kumar Mulmudi, and Pham Thi Thu Trang. "Double Perovskites." In Perovskite Solar Cells, 245–50. Includes bibliographical references and index.: Apple Academic Press, 2019. http://dx.doi.org/10.1201/9780429469749-17.
Fu, Kunwu, Anita Wing Yi Ho-Baillie, Hemant Kumar Mulmudi, and Pham Thi Thu Trang. "Tin-Based Perovskites." In Perovskite Solar Cells, 221–34. Includes bibliographical references and index.: Apple Academic Press, 2019. http://dx.doi.org/10.1201/9780429469749-14.
Fu, Kunwu, Anita Wing Yi Ho-Baillie, Hemant Kumar Mulmudi, and Pham Thi Thu Trang. "Germanium-Based Perovskites." In Perovskite Solar Cells, 235–38. Includes bibliographical references and index.: Apple Academic Press, 2019. http://dx.doi.org/10.1201/9780429469749-15.
Fu, Kunwu, Anita Wing Yi Ho-Baillie, Hemant Kumar Mulmudi, and Pham Thi Thu Trang. "Copper-Based Perovskites." In Perovskite Solar Cells, 239–44. Includes bibliographical references and index.: Apple Academic Press, 2019. http://dx.doi.org/10.1201/9780429469749-16.
Fu, Kunwu, Anita Wing Yi Ho-Baillie, Hemant Kumar Mulmudi, and Pham Thi Thu Trang. "Bismuth-Based Perovskites." In Perovskite Solar Cells, 251–60. Includes bibliographical references and index.: Apple Academic Press, 2019. http://dx.doi.org/10.1201/9780429469749-18.
Fu, Kunwu, Anita Wing Yi Ho-Baillie, Hemant Kumar Mulmudi, and Pham Thi Thu Trang. "Antimony-Based Perovskites." In Perovskite Solar Cells, 261–68. Includes bibliographical references and index.: Apple Academic Press, 2019. http://dx.doi.org/10.1201/9780429469749-19.
Todorov, Teodor K., Oki Gunawan, and Supratik Guha. "Halide Perovskite Tandem Solar Cells." In Halide Perovskites, 183–97. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2018. http://dx.doi.org/10.1002/9783527800766.ch2_05.
Boix, Pablo P., Sonia R. Raga, and Nripan Mathews. "Working Principles of Perovskite Solar Cells." In Halide Perovskites, 81–99. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2018. http://dx.doi.org/10.1002/9783527800766.ch2_01.
Conference papers on the topic "Planar perovskites solar cells":
Fan, Xin, Xiaoli Peng, Shu Zhang, and Yong Xiang. "Fabrication of planar heterojunction perovskite solar cells." In 2014 International Symposium on Next-Generation Electronics (ISNE). IEEE, 2014. http://dx.doi.org/10.1109/isne.2014.6839359.
Baumann, Andreas, Mathias Fischer, Kristofer Tvingstedt, and Vladimir Dyakonov. "Doping profile in planar perovskite solar cells." In 10th International Conference on Hybrid and Organic Photovoltaics. Valencia: Fundació Scito, 2018. http://dx.doi.org/10.29363/nanoge.hopv.2018.101.
Yamamoto, K., Md Shahiduzzaman, Y. Furumoto, T. Kuwabara, K. Takahashi, and T. Taima. "Degradation Mechanism for Planar Heterojunction Perovskite Solar Cells." In 2015 International Conference on Solid State Devices and Materials. The Japan Society of Applied Physics, 2015. http://dx.doi.org/10.7567/ssdm.2015.c-1-4.
Gill, Hardeep Singh, Akshay Kokil, Lian Li, Ravi Mosurkal, and Jayant Kumar. "Solution processed flexible planar hybrid perovskite solar cells." In SPIE Organic Photonics + Electronics, edited by Zakya H. Kafafi, Paul A. Lane, and Ifor D. W. Samuel. SPIE, 2014. http://dx.doi.org/10.1117/12.2061405.
Taima, Tetsuya, Kohei Yamamoto, Md Shahiduzzaman, Yoshikazu Furumoto, Takayuki Kuwabara, and Kohshin Takahashi. "Planar heterojunction perovskite solar cells fabricated by wet process." In SPIE OPTO, edited by Christopher E. Tabor, François Kajzar, Toshikuni Kaino, and Yasuhiro Koike. SPIE, 2017. http://dx.doi.org/10.1117/12.2257204.
Qin, Chuanjiang, Toshinori Matsushima, and Chihaya Adachi. "Degradation mechanism of planar perovskite solar cells (Presentation Recording)." In SPIE Organic Photonics + Electronics, edited by Zakya H. Kafafi, Paul A. Lane, and Ifor D. W. Samuel. SPIE, 2015. http://dx.doi.org/10.1117/12.2187578.
Lee, Jinho, Soonil Hong, Eunhag Lee, Hongkyu Kang, and Kwanghee Lee. "Interface engineering for large-area planar perovskite solar cells (Conference Presentation)." In Organic, Hybrid, and Perovskite Photovoltaics XVIII, edited by Kwanghee Lee, Zakya H. Kafafi, and Paul A. Lane. SPIE, 2017. http://dx.doi.org/10.1117/12.2273845.
PARK, TAIHO. "Thermally Stable, Planar Hybrid Perovskite Solar Cells with High Efficiency." In 4th Asia-Pacific International Conference on Perovskite, Organic Photovoltaics and Optoelectronics. València: Fundació Scito, 2019. http://dx.doi.org/10.29363/nanoge.iperop.2020.015.
Shahiduzzaman, M., H. Ashikawa, M. Kuniyoshi, S. Visal, T. Kaneko, T. Katsumata, T. Taima, S. Iwamori, M. Isomura, and K. Tomita. "Highly Efficient Planar Perovskite Solar Cells Utilizing Electron Transport Bilayer." In 2018 International Conference on Solid State Devices and Materials. The Japan Society of Applied Physics, 2018. http://dx.doi.org/10.7567/ssdm.2018.ps-6-13.
Gong, Jiawei, and Sumathy Krishnan. "Simulation of Inverted Perovskite Solar Cells." In ASME 2018 12th International Conference on Energy Sustainability collocated with the ASME 2018 Power Conference and the ASME 2018 Nuclear Forum. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/es2018-7227.
Reports on the topic "Planar perovskites solar cells":
Timmons, Michael L. Light-Weight, Low Cost, High-Efficiency Solar Cells Space Planar Arrays. Fort Belvoir, VA: Defense Technical Information Center, January 1996. http://dx.doi.org/10.21236/adb209013.