Log in

Relevant bibliographies by topics / Planing-machines

Contents

Journal articles
Books
Book chapters

Academic literature on the topic 'Planing-machines'

Author: Grafiati

Published: 4 June 2021

Last updated: 1 August 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Planing-machines.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Planing-machines"

1

Chukarin, Alexander, Besarion Meskhi, and David Shoniya. "THEORETICAL ANALYSIS ON REGULARITIES OF THE PROCESS OF NOISE GENERATION OF PLANING, SLOTTING AND PLANING-MILLING MACHINES." Akustika, VOLUME 41 (2021): 173–77. http://dx.doi.org/10.36336/akustika202141173.

Full text

Abstract:

The acoustic characteristics of the planing machines, which are the most widespread and the most noisy metalworking equipment, are considered. The article presents the theoretical models of the process of noise generation of planing, slotting and planing-milling machines. Regularities of sound pressure levels and sound power are obtained for brittle materials (cast iron blanks) mounted on the machine table. The regularities of the vibration velocities of the cutting tool and the workpiece are derived. The system of second-order differential equations is obtained for the version of the cantilever fixing of the planing cutter, using the developed approaches to the calculating vibrations and noise of machine equipment.

APA, Harvard, Vancouver, ISO, and other styles

2

Nadolny, Krzysztof, Wojciech Kapłonek, Marzena Sutowska, Paweł Sutowski, Piotr Myśliński, and Adam Gilewicz. "Experimental Studies on Durability of PVD-Based CrCN/CrN-Coated Cutting Blade of Planer Knives Used in the Pine Wood Planing Process." Materials 13, no. 10 (May 22, 2020): 2398. http://dx.doi.org/10.3390/ma13102398.

Full text

Abstract:

The condition of the cutting tool is one of the most important factors as it directly affects the technological and economic efficiencies of the woodworking process. The large variety of raw materials of wood combined with possible impurities and inclusion of solids puts high demands on planing machines. One of the methods to modify their operational properties is to apply antiwear coating on their working surfaces using vacuum deposition methods, such as physical vapor deposition (PVD). The use of such coatings reduces the adhesion of planing products to the surface of industrial planer knives, reduces the friction between the cutting tool and the workpiece, and limits the penetration of heat into the tool, thereby contributing to extending its effective working life. This study examines the impact of PVD-based CrCN/CrN coating on the operational durability and intensity of wear of planer knives operating in production conditions compared to unmodified knives (typically used in the wood processing industry for pine wood planing). For the unmodified and CrCN/CrN-coated planing blades (before and after processing), detailed analyses were carried out. These analyses included determining the rounding radius and profile along the blade (worn edge displacement), calculating surface texture parameters of the rake face of planer knives, and carrying out visual microscopic analysis of its condition. The results of the experiments indicated an increase in durability of up to 142% for the CrCN/CrN-coated tools. It was also found that the use of PVD-based modified industrial planer knives turned out to be more beneficial in each analyzed area of analysis.

APA, Harvard, Vancouver, ISO, and other styles

3

Rošić, Husein, Aldin Bjelić, Atif Hodžić, and Miran Merhar. "Optimization of solid wood workability parameters in the planing process." IOP Conference Series: Materials Science and Engineering 1298, no. 1 (December 1, 2023): 012012. http://dx.doi.org/10.1088/1757-899x/1298/1/012012.

Full text

Abstract:

Abstract It is known from theory and practice that the workability of wood depends on structural parameters that are closely related to the physical, mechanical and chemical properties of the type of wood itself, and disturbance parameters that refer to the technological and geometric parameters determined by the specific processing regime. That machinability, in addition to the mechanical output sizes, is often expressed by the quality, that is, the roughness of the processed surface. By defining a mathematical model in the process of planing solid wood in which the input sizes are processing parameters: wood density (ρ), feed rate (m/min) and number of cutting spirals (z), and the spilled sizes are praamters of roughness of the treated surface (Ra and Rz), and by applying optimization methods, optimal solutions for the process of planing solid wood on planer machines will be determined, so that the obtained Yoptim model will aim to improve the workability of solid wood, specifically its roughness of the processed surface.

APA, Harvard, Vancouver, ISO, and other styles

4

Bołoz, Łukasz, Antoni Kalukiewicz, Greg Galecki, Liubomyr Romanyshyn, Taras Romanyshyn, and Rafael Barrionuevo Giménez. "Conical Pick Production Process." New Trends in Production Engineering 3, no. 1 (August 1, 2020): 231–40. http://dx.doi.org/10.2478/ntpe-2020-0019.

Full text

Abstract:

AbstractOne of the basic methods of mechanical rock mining is cutting, which faces increasingly difficult working conditions. Despite the rapid development of machines used in underground and opencast mining as well as in tunnel building, construction industry and road engineering, the problem of insufficient durability of mining tools remains unsolved. In addition to drilling and, to a lesser extent, planing, cutting provides a huge market for tools. Currently, the process of cutting is mainly based on conical picks. The cutterheads of cutting machines are equipped with several dozen, and frequently – more than one hundred conical picks, which, due to their workability and abrasiveness, sometimes work only a few hours. There is a market demand for over two hundred models of conical picks. This is due to the huge variety of shapes and sizes of picks as well as the methods of their mounting in the holder. The article briefly presents various solutions of conical picks, their construction, methods of protection, dimensions and materials used. Next, based on materials produced by ZWM Carbonex, the classic method of their manufacture using the turning technology has been described. The authors have also presented briefly the use of die forging for the large-scale production of picks, applied by Górnicza Fabryka Narzędzi Sp. z o.o.

APA, Harvard, Vancouver, ISO, and other styles

5

Sadovyi, Mykola. "PRINCIPLES OF HISTORISM AND SYNERGETICS IN THE FORMATION OF SOURCES OF TECHNOLOGICAL EDUCATION IN VOLODYMYR VYNNYCHENKO CENTRAL UKRAINIAN STATE PEDAGOGICAL UNIVERSITY." Academic Notes Series Pedagogical Science 1, no. 191 (2020): 28–33. http://dx.doi.org/10.36550/2415-7988-2020-1-191-28-33.

Full text

Abstract:

The article considers an important problem of realization of the principle of historicism in the consideration of the formation of the department of theory and methods of technological training, labor protection and life safety (1957-1997). There are two active and one passive periods of its development. On the basis of archival data - orders on enrollment in positions the analysis of personnel of the management, teachers, employees of department is carried out. At the same time, the issue of material base development from almost all academic disciplines is revealed. The first stage of the department's origin covers the years 1957-1967. Mention of the specialty of labor training dates back to 1957, when the Department of Physics introduced an additional specialization "Work in school workshops." The department provided training in technical mechanics, electrical engineering, radio engineering, basics of mechanical engineering, mechanical engineering with a tractor workshop, woodworking and metals processing technology with a workshop in training workshops, training films, photography, methods of work in school workshops, industrial practice and more. The carpentry workshop was equipped with jointing, planing, turning, drilling and other machines, and mechanical industrial lathes, milling, drilling and planing machines. The curriculum provided for mastering the technological operations of manual and mechanical processing of materials in the school workshops of high school for boys. The girls mastered the profession of civil defense nurse. In 1967, the graduation of specialists in labor training ceased. In 1993, the second stage of the revival of recruitment for the specialty of labor training began. The educational and material base was formed, scientific and pedagogical staff, masters, laboratory assistants were selected, educational and methodical support was created, the specialty "Labor and Applied Creativity" was licensed, and recruitment for the first year was announced. In September 1994, 30 students were enrolled in the first year, according to the licensed volumes. At the beginning of the 1996-1997 academic year, the Faculty of Engineering and Pedagogy underwent a reorganization. In January 1997, the Department of General Technical Disciplines and Methods of Labor Training was established at the Faculty of Physics and Mathematics. Students studying in the specialty "Labor training and applied creativity" were transferred to the newly created licensed specialty "Labor training and basics of computer science".

APA, Harvard, Vancouver, ISO, and other styles

6

Lestari, Nurul Fajri Indah, Dyah Aring Hepiana Lestari, and Ani Suryani. "KEPUASAN, LOYALITAS KONSUMEN DAN STRATEGI PENGEMBANGAN AGROINDUSTRI KERUPUK BAWANG DI KOTA BANDAR LAMPUNG." Jurnal Ilmu-Ilmu Agribisnis 8, no. 3 (December 21, 2020): 446. http://dx.doi.org/10.23960/jiia.v8i3.4442.

Full text

Abstract:

This research aims to analyze the level of satisfaction and loyalty of consumers’of onion crackers and build strategies on the development of onion creackers agroindustry in Bandar Lampung city . This research is a case study. The samples are stakeholders from agroindustry, government officer, employees, and consumers of onion crackers. Technique sampling for consumers is snowballing. The methods of data analysis used are Customer Satisfaction Index analysis(CSI) analysis, SWOT analysis and Quantitive Strategic Planing Matrix analysis (QSPM). The results of this research showed that onion crackers consumers were loyal customers with high levels of satisfaction (CSI = 71.04%) and on the loyalty pyramid consumers were categorized as loyal, because 63.33% of them were committed buyers. For strategies combination IFE value was 2.686 and EFE was 2.645. In the internal and external matrix the position of the business was in quadrant V, meaning that agroindustry were in the growth phase. Based on QSPM analysis, the recommended strategies were to increase the production amount especially in dry season in order to meet consumer demand in rainy season by implementing the provided production machines which were owned by the agroindustry.Key words: consumer, loyalty, onion crackers, statisfaction, strategy.

APA, Harvard, Vancouver, ISO, and other styles

7

Altosole, Marco, Giovanni Benvenuto, Massimo Figari, and Ugo Campora. "Dimensionless Numerical Approaches for the Performance Prediction of Marine Waterjet Propulsion Units." International Journal of Rotating Machinery 2012 (2012): 1–12. http://dx.doi.org/10.1155/2012/321306.

Full text

Abstract:

One of the key issues at early design stage of a high-speed craft is the selection and the performance prediction of the propulsion system because at this stage only few information about the vessel are available. The objective of this work is precisely to provide the designer, in the case of waterjet propelled craft, with a simple and reliable calculation tool, able to predict the waterjet working points in design and off-design conditions, allowing to investigate several propulsive options during the ship design process. In the paper two original dimensionless numerical procedures, one referred to jet units for naval applications and the other more suitable for planing boats, are presented. The first procedure is based on a generalized performance map for mixed flow pumps, derived from the analysis of several waterjet pumps by applying similitude principles of the hydraulic machines. The second approach, validated by some comparisons with current waterjet installations, is based on a complete physical approach, from which a set of non-dimensional waterjet characteristics has been drawn by the authors. The presented application examples show the validity and the degree of accuracy of the proposed methodologies for the performance evaluation of waterjet propulsion systems.

APA, Harvard, Vancouver, ISO, and other styles

8

Noeman, Noeman, Fadhila Fajri Putri, Rakhmat Purnomo, and Robertus Suraji. "Prediksi Persediaan Material Menggunakan Metode Single Exponential Smoothing." Journal of Practical Computer Science 2, no. 2 (December 13, 2022): 74–83. http://dx.doi.org/10.37366/jpcs.v2i2.1468.

Full text

Abstract:

Material is an important material in manufacturing companies that make components of an item. Used to make various components which are then processed on injection machines. This of course makes warehouse and Production Planing Inventory Control (PPIC) employees have to see and ensure that the availability of materials can be fulfilled for several days or months, then make planning for spending or using materials if the existing materials have reached the availability limit. , and also inconsistent data such as lack of material. The purpose of this study is to find out how much material inventory is for the next 1 period. The method used is Single Exponential Smoothing with a constant of 0.9. Provision of constants for calculations from the High Impact Polystyrene (HIPS) 495F NATURAL material data sample which is applied to 3 other types of materials. The result of this research is that for PBT DURANEX 3300 NATURAL, the result is 777.01 with MSE 2880745.72, MAD 489.96 and MAPE 0.074%. ABS material type TOYOLAC T500-322 NATURAL got 2813.18 results with MSE 342161.98, MAD 168.85, and MAPE 0.092%. Material Type AS STYLAC 769 6A-X8113 IVORY got 663.46 results with MSE 222210.16, MAD 136.07, and MAPE 0.092%.

APA, Harvard, Vancouver, ISO, and other styles

9

Ayu Nur Faiza, Ida, and Rawi Miharti. "STUDI DESKRIPTIF PERSIAPAN DOKUMEN AKREDITASI PUSKESMAS 2015 TENTANG PEMBAKUAN KODE DI PUSKESMAS NANGGULAN KULON PROGO." MEDIA ILMU KESEHATAN 5, no. 2 (November 10, 2019): 147–57. http://dx.doi.org/10.30989/mik.v5i2.159.

Full text

Abstract:

Background: In the era of the ASEAN Free Trade Area (AFTA), the quality of health services is required to compete internationally. The data of diagnostic and procedure is one of the determinants of service quality. One of the ways to improve the quality of health services is to carry out accreditation. Puskesmas Nanggulan Kulon Progo prepared the documents about standardisation of code for Puskesmas Accreditation 2015. Furthermore, in National Health Insurance program (Jaminan Kesehatan Nasionalprogram) diagnostic and procedure codes are used as the terms to claim to Badan Penyelenggara Jaminan Sosial (BPJS). Objective: This research aimed to explore the documents preparation of Puskesmas Accreditation 2015 regarding code standardisation at Puskesmas Nanggulan Kulon Progo. Method: This research was a descriptive research with a qualitative approach. The design of the research used in this study was phenomenology. Data collection technique in this study was observation towards the documents of accreditation related to codestandardisation and interview withfive respondents who involvedin the accreditation team. Results: The documents preparation forPuskesmas Accreditation 2015 regardingcodestandardisation was successfully completed. The preparation for accreditation related to code standardisation were as follow: Man: planing the finance scheme,prepare documents related to accreditation, form a team of accreditation documents arrangement Method: process of forming a team that will arrange the documents and the process of preparing the documents Materials: preparing stationery for office use Machines: preparing laptop (or computers) and printer Money : meeting all the financial Conclusion:Documents preparation towards Puskesmas accreditation require human resource, methods, materials, machines, and fund. Keywords: Accreditation, accreditation preparation, puskesmas accreditation, 5M, standardisation of the code.

APA, Harvard, Vancouver, ISO, and other styles

10

Nur Faiza, Ida Ayu, and Rawi Miharti. "STUDI DESKRIPTIF PERSIAPAN DOKUMEN AKREDITASI PUSKESMAS 2015 TENTANG PEMBAKUAN KODE DI PUSKESMAS NANGGULAN KULON PROGO." Media Ilmu Kesehatan 5, no. 2 (August 3, 2016): 157–67. http://dx.doi.org/10.30989/mik.v5i2.66.

Full text

Abstract:

Background: In the era of the ASEAN Free Trade Area (AFTA), the quality of health services is required to compete internationally. The data of diagnostic and procedure is one of the determinants of service quality. One of the ways to improve the quality of health services is to carry out accreditation. Puskesmas Nanggulan Kulon Progo prepared the documents about standardisation of code for Puskesmas Accreditation 2015. Furthermore, in National Health Insurance program (Jaminan Kesehatan Nasionalprogram) diagnostic and procedure codes are used as the terms to claim to Badan Penyelenggara Jaminan Sosial (BPJS). Objective: This research aimed to explore the documents preparation of Puskesmas Accreditation 2015 regarding code standardisation at Puskesmas Nanggulan Kulon Progo. Method: This research was a descriptive research with a qualitative approach. The design of the research used in this study was phenomenology. Data collection technique in this study was observation towards the documents of accreditation related to codestandardisation and interview withfive respondents who involvedin the accreditation team. Results: The documents preparation forPuskesmas Accreditation 2015 regardingcodestandardisation was successfully completed. The preparation for accreditation related to code standardisation were as follow: Man: planing the finance scheme,prepare documents related to accreditation, form a team of accreditation documents arrangement Method: process of forming a team that will arrange the documents and the process of preparing the documents Materials: preparing stationery for office use Machines: preparing laptop (or computers) and printer Money : meeting all the financial needs. Conclusion:Documents preparation towards Puskesmas accreditation require human resource, methods, materials, machines, and fund. Keywords: Accreditation, accreditation preparation, puskesmas accreditation, 5M, standardisation of the code.

APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Planing-machines"

1

Holøyen, Sindre. Forbedring av høvlings-kvalitet gjennom modifisering av høvlingsverktøy =: Improvement of planing quality through modification of planing tools. Oslo: Treteknisk, 2003.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Holøyen, Sindre. Forbedring av høvlings-kvalitet gjennom modifisering av høvlingsverktøy =: Improvement of planing quality through modification of planing tools. Oslo: Treteknisk, 2003.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Batin, O. B. Strugovai͡a vyemka: Sbornik nauchnykh trudov. Moskva: IGD im. A.A. Skochinskogo, 1990.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Publishing, Fox Chapel. Jointer. East Petersburg, PA: Fox Chapel Pub., 2010.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Publishing, Fox Chapel, ed. Jointer. East Petersburg, PA: Fox Chapel Pub. Company, 2010.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Peters, Rick. Jointers and planers: How to choose, use and maintain them. New York: Sterling Pub., 2001.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Shapers. Lindsay Publications Inc, 1994.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Apuntes de limadora (cepillo de codo) para la especialdad de técnico en máquinas-herramienta. México D. F: Instituto Politécnico Nacional, 1998.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Cope, Kenneth L. American Planer, Shaper and Slotter Builders. Astragal Press, 2002.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Magazine, Editors of Fine Woodworking. Best of Fine Woodworking : Power Saws and Planers. Taunton, 1990.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Planing-machines"

1

Huda, Zainul. "Shaping/Planing Operations and Machines." In Machining Processes and Machines, 133–45. First edition. | Boca Raton : CRC Press, 2020.: CRC Press, 2020. http://dx.doi.org/10.1201/9781003081203-10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

"Planing machines." In Machine Woodworking, 49–78. Routledge, 2013. http://dx.doi.org/10.4324/9780080928630-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

"MEASURES FOR PREVENTING ACCIDENTS FROM WOOD-PLANING MACHINES (1910)." In Franz Kafka, 109–19. Princeton University Press, 2020. http://dx.doi.org/10.2307/j.ctv17db3b9.12.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

"6. Measures for Preventing Accidents from Wood- Planing Machines (1910)." In Franz Kafka, 109–19. Princeton University Press, 2008. http://dx.doi.org/10.1515/9780691222608-010.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!