Relevant bibliographies by topics / Plasma cutting unit

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers

Academic literature on the topic 'Plasma cutting unit'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Plasma cutting unit.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Plasma cutting unit"

1

Sizemore, J. M., and D. P. Rome. "Increased Duty Cycle for Plasma Arc Cutting Machines Through a Separated Automatic Plate Marking Station." Journal of Ship Production 5, no. 04 (1989): 207–27. http://dx.doi.org/10.5957/jsp.1989.5.4.207.

Full text
Abstract:
Plate marking as currently practiced limits plasma arc cutting machine duty cycle. This, in turn, constrains plate fabrication process lane throughput. A separate automatic plate marking station which will significantly increase plasma arc cutting capacities is defined. A 60 to 100 percent increase in plate fabrication process lane throughput is anticipated while simultaneously reducing unit direct labor. The design is supported by technical feasibility demonstrations.
APA, Harvard, Vancouver, ISO, and other styles
2

., Syukran, Ajannifar ., Musbar ., and Abdullah Irwansyah. "PELATIHAN PENINGKATAN KETRAMPILAN METAL CUTTING PROCESS METODE PLASMA BAGI PEKERJA BENGKEL LAS DI MEUNASAH MESJID KECAMATAN BLANG MANGAT KOTA LHOKSEUMAWE." Jurnal Vokasi 3, no. 1 (2019): 39. http://dx.doi.org/10.30811/vokasi.v3i1.996.

Full text
Abstract:
Bengkel Kesayangan Tehnik dan Bengkel Adek Abang merupakan 2 unit usaha bengkel las yang berada di gampong Mesjid Punteuet, Kecamatan Blang Mangat Pemkot Lhokseumawe. Bengkel las Kesayangan Tehnik berdiri sejak tahun 1995, Sedangkan bengkel las Adek Abang berdiri sejak tahun 2012. Jarak kedua bengkel tersebut dengan kampus Politeknik Negeri Lhokseumawe sekitar 3 km. Salah satu pekerjaan yang sering dilakukan oleh bengkel tersebut adalah pemotongan pelat mengikuti profil yang ditentukan untuk keperluan fabrikasi. Kondisi selama ini pomotongan selalu dilakukan menggunakan proses oxy-acyteline. K
APA, Harvard, Vancouver, ISO, and other styles
3

Lisizki, Vladimir Vladimirovich, Alexey Anatolyevich Vasilyev, Konstantin Dmitrievich Mogilko, Nikolai Alexeyevich Nosyrev, and Nikolai Valerievich Rosov. "Prospects for introducing advanced technologies at enterprises of Southern Center of Shipbuilding and Ship Repair, JSC." Vestnik of Astrakhan State Technical University. Series: Marine engineering and technologies 2023, no. 2 (2023): 41–46. http://dx.doi.org/10.24143/2073-1574-2023-2-41-46.

Full text
Abstract:
The article focuses on the trends of development in modern shipbuilding in the context of digital transformation and promising national projects recommended for implementing at the enterprises of Southern Center for Shipbuilding and Ship Repair, JSC. The calculation program of shipyards, the composition and main features of the created industries are given. There is described the modern Russian technological equipment recommended for implementation at Southern Center of Shipbuilding and Ship Repair, JSC including machines with numerical control for laser and plasma cutting the sheet parts and
APA, Harvard, Vancouver, ISO, and other styles
4

Jasim Hassan Rasheed. "Comparison of Different Unconventional Thermal Energies for Steel Cutting Process." Diyala Journal of Engineering Sciences 6, no. 1 (2013): 17–26. http://dx.doi.org/10.24237/djes.2013.06102.

Full text
Abstract:
different unconventional heat sources for material processing were discussed . The heat sources such as plasma arc, electron beam and Co2 laser were employed previously by other researchers, while " Co2laser– gas mixture" system was studied during the present research . Comparison between the results of present work with the others mentioned above was made . The parameter which was adopted for comparison is the "energy consumed per unit length" for particular thickness .The parameter is based on the equation which was suggested by the author of this research . Linear relationship between energ
APA, Harvard, Vancouver, ISO, and other styles
5

Kuo, Jian Long, and Chung Hao Hsieh. "Optimal Yield Rate in ACF Cutting Process of TFT-LCD Module Using Orthogonal Particle Swarm Optimization." Applied Mechanics and Materials 479-480 (December 2013): 353–59. http://dx.doi.org/10.4028/www.scientific.net/amm.479-480.353.

Full text
Abstract:
Anisotropic Conductive Film (ACF) is essential material in LCM (Liquid Crystal Module) process. It is used in bonding process to make the driving circuit conductive. Because the price of TFT-LCD is much lower than before in recent years, the ACF cost has relatively higher ratio in manufacture cost. The conventional long bar ACF cutting unit is changed to short bar ACF cutting unit in new bonding technology. However, the new type machine was not optimized in process and mechanical design. Therefore, the failure rate of new ACF cutting process is much higher than the one of the conventional proc
APA, Harvard, Vancouver, ISO, and other styles
6

Grigor’ev, S. N., M. Sh Migranov, M. A. Volosova, and A. S. Gusev. "Sintered powder high-entropy target cathodes for wear-resistant coatings." Izvestiya. Ferrous Metallurgy 66, no. 4 (2023): 410–14. http://dx.doi.org/10.17073/0368-0797-2023-4-410-414.

Full text
Abstract:
Modern machine-building production equipped with high-performance mechatronic systems and numerically-controlled and adaptive control machines for blade cutting of heat-resistant chromium-nickel and titanium alloys requires increasing the operating properties of cutting tools working at high temperature-force loads in the contact zone, respectively with a significant stress-strain state of the cutting wedge. It is possible to solve the problem of increasing wear resistance and serviceability by developing and introducing new tooling material, as well as by applying wear-resistant coatings. The
APA, Harvard, Vancouver, ISO, and other styles
7

Kim, Juyoul, and Batbuyan Tseren. "Occupational ALARA Planning for Reactor Pressure Vessel Dismantling at Kori Unit 1." International Journal of Environmental Research and Public Health 17, no. 15 (2020): 5346. http://dx.doi.org/10.3390/ijerph17155346.

Full text
Abstract:
Assessing workers’ safety and health during the decommissioning of nuclear power plants (NPPs) is an important procedure in terms of occupational radiation exposure (ORE). Optimizing the radiation exposure through the “As Low As Reasonably Achievable (ALARA)” principle is a very important procedure in the phase of nuclear decommissioning. Using the VISIPLAN 3D ALARA planning tool, this study aimed at assessing the radiological doses to workers during the dismantling of the reactor pressure vessel (RPV) at Kori NPP unit 1. Fragmentation and segmentation cutting processes were applied to cut the
APA, Harvard, Vancouver, ISO, and other styles
8

Setiawan. B, Christian Albert, Marulan Andivas, Dimaz Harits, and Alex Kisanjani. "Evaluasi Keselamatan Kerja Mesin Plasma Cutting Dengan Pendekatan JSA Dalam Identifikasi Bahaya." Teknika Sains: Jurnal Ilmu Teknik 10, no. 1 (2025): 9–16. https://doi.org/10.24967/teksis.v10i1.3623.

Full text
Abstract:
Penelitian ini mengevaluasi keselamatan kerja mesin plasma cutting dengan menggunakan pendekatan Job Safety Analysis (JSA) dalam identifikasi bahaya. Dalam sektor manufaktur dan konstruksi yang berkembang pesat, penggunaan mesin plasma cutting menjadi krusial, namun risiko kecelakaan kerja tetap tinggi akibat kurangnya kesadaran dan keterampilan pekerja. Melalui wawancara dan observasi, penelitian ini mengidentifikasi berbagai potensi bahaya seperti kebakaran, paparan sinar UV, dan kecelakaan listrik. Dengan menerapkan metode JSA, langkah-langkah pengendalian risiko dirumuskan untuk meminimalk
APA, Harvard, Vancouver, ISO, and other styles
9

McGough, Michael S., William E. Austin, and George J. Knetl. "Performance of the Automated Cutting Equipment System During the Plasma Cutting of the Three Mile Island Unit 2 Lower Core Support Assembly." Nuclear Technology 87, no. 3 (1989): 648–59. http://dx.doi.org/10.13182/nt89-a27717.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kubich, V. "RESISTANCE OF HEAT-RESISTANT YTTRIUM-CONTAINING SEALING COATINGS TO MECHANICAL FRACTURE WHEN FORMING CUTTING PATHS." Eurasian Physical Technical Journal 21, no. 3(49) (2024): 81–92. http://dx.doi.org/10.31489/2024no3/81-92.

Full text
Abstract:
According to the results of tribotechnical tests of coatings made of KNA-82 alloy ligatures with the addition of yttrium of 0.1%, 0.3%, 0.5%, data were obtained that allowed us to establish the nature of changes in the dynamic coefficient of friction over the test period and numerous values of the energy intensity of material wear. The evaluation of coatings formed by the gas-flame and ion-plasma method was based on the following premise. The maximum resistance to mechanical fracture is determined by the manifestation of a constant minimum value of the dynamic coefficient of friction. This ser
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Plasma cutting unit"

1

Г, Ланчинський В. "Система керування плазморізальною установкою". Master's thesis, Сумський державний університет, 2020. https://essuir.sumdu.edu.ua/handle/123456789/81761.

Full text
Abstract:
В роботі були створені математичні моделі електроприводу переміщень, та джерела живлення плазмової дуги. Промодельовані режими роботи установки в середовищі MatLab. За результатами моделювання підібрані оптимальні параметри налаштувань приводу, та ПІД регулятора струму дуги. Задля перевірки адекватності проведених досліджень були побудовані експериментальні стенди, та проведені відповідні досліди. Результатом роботи є отримані дані, для розробки системи керування процесом ПРМ.
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Plasma cutting unit"

1

Ovcharenko, Vladimir E., Konstantin V. Ivanov, and Bao Hai Yu. "Formation of a Nanostructured Hardened Surface Layer on the TiC-(Ni-Cr) Metal-Ceramic Alloy by Pulsed Electron-Beam Irradiation." In Springer Tracts in Mechanical Engineering. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-60124-9_18.

Full text
Abstract:
AbstractThe efficiency and service life of products made from metal-ceramic tool alloys and used as cutting tools and friction units are determined by a combination of physical and strength properties of their surface layers with a thickness of up to 200 μm. Therefore, much attention is paid to their improvement at the present time. An effective way to increase the operational properties of the metal-ceramic alloy products is to modify the structure and the phase composition of the surface layers by forming multi-scale internal structures with a high proportion of low-dimensional (submicro and
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Plasma cutting unit"

1

Jones, Jerald E., Valerie L. Rhoades, Mark D. Mann, and Todd Holverson. "Hybrid Induction Plasma Cutting Process - A New Technology for High Speed Metal Cutting." In SNAME Maritime Convention. SNAME, 2014. http://dx.doi.org/10.5957/smc-2014-p39.

Full text
Abstract:
A new cutting process, a hybrid system, uses induction heating to heat the metal ahead of the plasma cutting torch. The process has demonstrated the ability to plasma cut steel parts at speeds of up to 4X the speed of the plasma torch without the induction heating. Although the total heat input per unit time is greater, because of the increase in speed, the heat which is conducted into the cut pieces is less. This causes less potential metallurgical damage, less potential distortion, and reduced coating damage and reduced emissions during cutting, in comparison to the plasma cutting process wi
APA, Harvard, Vancouver, ISO, and other styles
2

Kreitman, Paul J., Joseph Boucau, Per Segerud, and Stefan Fallstro¨m. "Feedback From Westinghouse Experience on Segmentation of Reactor Vessel Internals." In ASME 2011 14th International Conference on Environmental Remediation and Radioactive Waste Management. ASMEDC, 2011. http://dx.doi.org/10.1115/icem2011-59013.

Full text
Abstract:
With more than 25 years of experience in the development of reactor vessel internals segmentation and packaging technology, Westinghouse has accumulated significant know-how in the reactor dismantling market. Building on tooling concepts and cutting methodologies developed decades ago for the successful removal of nuclear fuel from the damaged Three Mile Island Unit 2 reactor (TMI-2), Westinghouse has continuously improved its approach to internals segmentation and packaging by incorporating lessons learned and best practices into each successive project. Westinghouse has developed several con
APA, Harvard, Vancouver, ISO, and other styles
3

Derev'yanko, Oleksandr, Tetyana Istomina, Roman Lytvyn, Oleksandr Myslyvchenko, Dmytro Verbylo, and Ostap Zgalat-Lozynskyy. "Ceramic material based on TiB2-FeSi using the reaction sintering method under SPS conditions." In IXth INTERNATIONAL SAMSONOV CONFERENCE “MATERIALS SCIENCE OF REFRACTORY COMPOUNDS”. Frantsevich Ukrainian Materials Research Society, 2024. http://dx.doi.org/10.62564/m4-od1542.

Full text
Abstract:
When creating new heterogeneous structural materials based on TiB2, the addition of binding components [1]. This has a positive effect on wear resistance, strength, and crack resistance. One of the promising directions for the consolidation of ceramics based on TiB2 is the use of spark plasma sintering (SPS) technology. In order to obtain a ceramic composite material based on the TiB2-FeSi composition, a mixture of powders with a composition (vol. fr.) of 27%TiH1.5-62%TiB2-9%TiSi2-2%Fe was used [2]. The SPS process was performed without the use of a protective chamber with a vacuum/gas environ
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Plasma cutting unit' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography