Relevant bibliographies by topics / Plasma polymerization

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Plasma polymerization'

Author: Grafiati
Published: 4 June 2021
Last updated: 31 July 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Plasma polymerization.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Plasma polymerization"

1

Niemczyk, Edyta M., Alvaro Gomez-Lopez, Jean R. N. Haler, Gilles Frache, Haritz Sardon, and Robert Quintana. "Insights on the Atmospheric-Pressure Plasma-Induced Free-Radical Polymerization of Allyl Ether Cyclic Carbonate Liquid Layers." Polymers 13, no. 17 (August 25, 2021): 2856. http://dx.doi.org/10.3390/polym13172856.

Full text
Abstract:
Plasma-induced free-radical polymerizations rely on the formation of radical species to initiate polymerization, leading to some extent of monomer fragmentation. In this work, the plasma-induced polymerization of an allyl ether-substituted six-membered cyclic carbonate (A6CC) is demonstrated and emphasizes the retention of the cyclic carbonate moieties. Taking advantage of the low polymerization tendency of allyl monomers, the characterization of the oligomeric species is studied to obtain insights into the effect of plasma exposure on inducing free-radical polymerization. In less than 5 min of plasma exposure, a monomer conversion close to 90% is obtained. The molecular analysis of the oligomers by gel permeation chromatography coupled with high-resolution mass spectrometry (GPC-HRMS) further confirms the high preservation of the cyclic structure and, based on the detected end groups, points to hydrogen abstraction as the main contributor to the initiation and termination of polymer chain growth. These results demonstrate that the elaboration of surfaces functionalized with cyclic carbonates could be readily elaborated by atmospheric-pressure plasmas, for instance, by copolymerization.
APA, Harvard, Vancouver, ISO, and other styles
2

Wertheimer, M. R. "Plasma polymerization." Thin Solid Films 144, no. 1 (November 1986): L107—L108. http://dx.doi.org/10.1016/0040-6090(86)90080-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kay, E. "Plasma Polymerization." Berichte der Bunsengesellschaft für physikalische Chemie 95, no. 11 (November 1991): 1376. http://dx.doi.org/10.1002/bbpc.19910951110.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

HIROTSU, TOSHIHIRO. "Plasma Graft Polymerization." Sen'i Gakkaishi 41, no. 10 (1985): P388—P393. http://dx.doi.org/10.2115/fiber.41.10_p388.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Epaillard, F., J. C. Brosse, and G. Legeay. "Plasma-induced polymerization." Journal of Applied Polymer Science 38, no. 5 (September 5, 1989): 887–98. http://dx.doi.org/10.1002/app.1989.070380510.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Park, Soo Young, Nakjoong Kim, Un Young Kim, Sung Il Hong, and Hiroyuki Sasabe. "Plasma Polymerization of Hexamethyldisilazane." Polymer Journal 22, no. 3 (March 1990): 242–49. http://dx.doi.org/10.1295/polymj.22.242.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

TAKADA, Toshinari, Haruo AKAHOSHI, and Akio TAKAHASHI. "Plasma polymerization of hexafluoroethane." KOBUNSHI RONBUNSHU 47, no. 7 (1990): 549–52. http://dx.doi.org/10.1295/koron.47.549.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Fonseca, J. L. C., D. C. Apperley, and J. P. S. Badyal. "Plasma polymerization of tetramethylsilane." Chemistry of Materials 5, no. 11 (November 1993): 1676–82. http://dx.doi.org/10.1021/cm00035a015.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

INAGAKI, NORIHIRO. "Plasma treatment and polymerization." NIPPON GOMU KYOKAISHI 62, no. 11 (1989): 707–16. http://dx.doi.org/10.2324/gomu.62.707.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Morita, S., and Shuzo Hattori. "Applications of plasma polymerization." Pure and Applied Chemistry 57, no. 9 (January 1, 1985): 1277–86. http://dx.doi.org/10.1351/pac198557091277.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Plasma polymerization"

1

Ryan, Martin Edward. "Mechanistic studies of plasma polymerization." Thesis, Durham University, 1995. http://etheses.dur.ac.uk/5455/.

Full text
Abstract:
Plasma polymerization is a solventless method for depositing polymeric layers onto any substrate at room temperature. This technique comprises excitation, fragmentation, and polymerization of precursor molecules by an electrical discharge. Although widely used, the fundamental molecular processes associated with plasma polymerization are not fully understood. Basic plasma / polymer interactions were studied by investigating the surface treatment of polytetrafluoroethylene (PTFE) using inert and reactive gas discharges. Depending upon the feed gas employed, chemical, UV, or ion beam modification of the PTFE surface were found to be important. Argon glow discharge treatment was found to result in similar physicochemical phenomena at the PTFE surface to that observed during argon ion beam studies, thereby supporting the relative importance of ion bombardment during noble gas plasma modification. In high power discharges it has been shown that extensive ion bombardment of PTFE can lead to the simultaneous sputtering and plasma polymerization of ejected species onto an adjacent substrate. The chemical nature of the resultant fluorocarbon deposits for various gases was found to correlate to the earlier surface treatment studies. Another way of carrying out plasma polymerization is to use pulsed plasmas; these offer the advantage of greater retention of monomer structure within the plasma polymer matrix. In the case of maleic anhydride less fragmentation of the precursor, reduced beam damage of the polymer, and radically initiated polymerization was observed by increasing the off-period of the pulse. Similarly the structural characteristics of 2- iodothiophene plasma polymers were found to be influenced by the electrical discharge power and pulsing parameters leading to a gradual destruction of the aromatic ring structure.
APA, Harvard, Vancouver, ISO, and other styles
2

FIELDING, JENNIFER CHASE. "FLUORINATION OF SILICONE RUBBER BY PLASMA POLYMERIZATION." University of Cincinnati / OhioLINK, 2004. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1085442499.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gilliam, Mary A. "A plasma polymerization investigation and low temperature cascade arc plasma for polymeric surface modification." Diss., Columbia, Mo. : University of Missouri-Columbia, 2006. http://hdl.handle.net/10355/4355.

Full text
Abstract:
Thesis (Ph.D.)--University of Missouri-Columbia, 2006.
The entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file viewed on (April 25, 2007) Vita. Includes bibliographical references.
APA, Harvard, Vancouver, ISO, and other styles
4

Tarducci, Cinzia. "Functionalization of solid surfaces by pulsed plasma polymerization." Thesis, Durham University, 2002. http://etheses.dur.ac.uk/4157/.

Full text
Abstract:
Pulsed plasma polymerization provides a direct method for the functionalization of solid surfaces. Compared to low power continuous wave plasma conditions, it provokes very little monomer fragmentation and leads to high levels of structural retention. The monomers investigated in this thesis contained a polymerizable double bond and either a perfluoro, epoxide, cyano, hydroxyl or furan functionality. Under pulsed conditions activation of the double bond occurs during the time on period and conventional intermolecular propagation reactions occur during the time off. In the case of dienes, cyclic structures are formed, via intramolecular propagation. The plasma polymers were investigated using X-ray photoelectron, infrared, ultraviolet/visible and secondary ion mass spectroscopies, nuclear magnetic resonance, contact angle and gel permeation chromatography. Epoxide and hydroxyl functionalized solid surfaces could be further functionalized via conventional chemistry reactions. Furan functionalized solid surfaces were capable of undergoing Diels-Alder reactions. The cyano functionalized layers were found to readily complex silver ions from solution. Epoxide and cyano functionalized surfaces exhibited adhesive behavior.
APA, Harvard, Vancouver, ISO, and other styles
5

JOHNSON, ERIC MICHAEL. "PLASMA POLYMERIZATION FOR THE FABRICATION OF OPTICAL STACKS." University of Cincinnati / OhioLINK, 2001. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1004706209.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Huang, Chun. "An optical emission study on DC plasma polymerization /." free to MU campus, to others for purchase, 2003. http://wwwlib.umi.com/cr/mo/fullcit?p1418031.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kostyleva, Kseniia. "Příprava vrstev metodou plazmové polymerace a jejich charakterizace." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2021. http://www.nusl.cz/ntk/nusl-449395.

Full text
Abstract:
The diploma work deals with the preparation of biocompatible hydrophilic layers from a propane-butane mixture by plasma polymerization. Subsequent characterization of the layers was performed using both biological (antibacterial tests and biocompatibility test) and physico-chemical diagnostics (SEM, OES and surface energy determination). The theoretical part presents the basic principle of dielectric barrier discharge, its use and various types, including surface dielectric barrier discharge (SDBD), which was used during deposition. Next, cell cultures, cell morphology and clarification of the term biocompatibility were described. At the end of the theoretical part, all used during the experimental part of the diagnostics were also described. In the experimental part, the procedure of deposition of hydrophilic layers and the overall apparatus, which was used during deposition, were presented. Prior to the characterization of the samples, the discharge was diagnosed using optical emission spectroscopy. Furthermore, the level of hydrophilicity of the layers and their elemental composition on the surface was determined. Biological tests for biocompatibility and antibacterial properties provided information on the viability of the cells on the layers and their antibacterial effects.
APA, Harvard, Vancouver, ISO, and other styles
8

Unver, Alper. "Plasma Induced Solid State Polymerization Of N-isopropylacrylamide (nipam)." Phd thesis, METU, 2008. http://etd.lib.metu.edu.tr/upload/3/12609242/index.pdf.

Full text
Abstract:
Poly(N-isopropylacrylamide) (PNIPAM) is a smart polymer exhibiting an inverse temperature-solubility relationship with a sharp transition at 32°
C in its aqueous solution. Due to its reversible thermo-responsive phase transition behavior at around body temperature, PNIPAM promise a potential for a variety of novel applications especially in biotechnology and medicine. PNIPAM can be produced by conventional polymerization methods, as well as by use of ionizing radiation, primarily by gamma which leads mainly to a residual-free crosslinked polymer. In this study, RF plasma (glow discharge) technique is used as a novel synthesis method in solid state leading to higher proportions of linear polymer. Since plasma method is an additive-/initiator-free process, a residual-free polymer is expected. To obtain a better understanding of the plasma induced solid state polymerization mechanism of NIPAM, X-ray data are used. It is found that crystalline structures of Acrylamide (AAm) and NIPAM are isomorphous. Plasma and post plasma aging effects on crystalline structure of NIPAM are followed. From the Electron Paramagnetic Resonance (EPR) investigations it is observed that post plasma polymerization of NIPAM in solid state proceed by radicalic mechanism. After determination of temperature range in which the radical formed by plasma treatment of NIPAM is highly stable, decay kinetics of the propagating radical in solid state after plasma treatment has been studied in detail.
APA, Harvard, Vancouver, ISO, and other styles
9

Zhang, Ning. "SURFACE MODIFICATION OF MICRON-SIZE POWDERS BY PLASMA POLYMERIZATION." University of Cincinnati / OhioLINK, 2000. http://rave.ohiolink.edu/etdc/view?acc_num=ucin971280515.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Slapelis, Linda. "Plasma modification of poly(ester sulfonic) acid anionomeric membranes /." Online version of thesis, 1994. http://hdl.handle.net/1850/11445.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Plasma polymerization"

1

Yasuda, H. Plasma polymerization. Orlando: Academic Press, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Biederman, Hynek. Plasma polymerization processes. Amsterdam: Elsevier, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

H, Yasuda, and American Chemical Society. Division of Organic Coatings and Plastics Chemistry., eds. Plasma polymerization and plasma treatment of polymers. New York, N.Y: J. Wiley, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

H, Yasuda, and American Chemical Society Meeting, eds. Plasma polymerization and plasma interactions with polymeric materials: Proceedings of the Symposium on Plasma Polymerization and Plasma Interactions with Polymeric Materials, held at the ACS 199th National Meeting in Boston, Massachusetts, April 1990. New York, NY: Wiley, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

H, Yasuda, ed. Plasma polymerization and plasma treatment of polymers: Papers presented at the Symposium on Plasma Polymerization and Plasma Treatment of Polymers held at the American Chemical Society, April 1987. New York: John Wiley, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

American Chemical Society Symposium on Plasma Deposition of Polymeric Thin Films: Chemistry, Characterization, and Applications (1993 Denver, Colo.). Plasma deposition of polymeric thin films: Proceedings of the American Chemical Society Symposium on Plasma Deposition of Polymeric Thin Films: Chemistry, Characterization, and Applications, held in Denver, Colorado, March 28-29, 1993. Edited by Danilich Michael J, Marchant Roger E, and American Chemical Society. New York: Wiley, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Plein, Peter. Untersuchungen zur Plasmapolymerisation - Anlagenkonzeption, Prozessanalyse und Schichteigenschaften: Investigations into plasma polymerization - equipment conception, process analysis and film properties. [s.l.]: [s.n.], 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Plasma Polymerization. Elsevier, 1985. http://dx.doi.org/10.1016/c2012-0-01688-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Plasma polymerization. Orlando: Academic Press, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Yasuda, H. K. Plasma Polymerization. Elsevier Science & Technology Books, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Plasma polymerization"

1

Winter, Patrick M., Gregory M. Lanza, Samuel A. Wickline, Marc Madou, Chunlei Wang, Parag B. Deotare, Marko Loncar, et al. "Plasma Polymerization." In Encyclopedia of Nanotechnology, 2126. Dordrecht: Springer Netherlands, 2012. http://dx.doi.org/10.1007/978-90-481-9751-4_100661.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Gooch, Jan W. "Plasma Polymerization." In Encyclopedic Dictionary of Polymers, 540. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_8804.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Roualdes, Stephanie. "Plasma Polymerization." In Encyclopedia of Membranes, 1–3. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-642-40872-4_1228-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Poncin-Epaillard, F., J. C. Brosse, J. Bretagne, and A. Ricard. "Plasma Induced Polymerization." In Plasma-Surface Interactions and Processing of Materials, 515–17. Dordrecht: Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-009-1946-4_36.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Steele, David A., and Robert D. Short. "Applications of Plasma Polymerization in Biomaterials." In Industrial Plasma Technology, 165–80. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2010. http://dx.doi.org/10.1002/9783527629749.ch13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Roualdes, Stephanie. "Plasma-Enhanced Chemical Vapor Deposition (Plasma Polymerization)." In Encyclopedia of Membranes, 1–2. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-642-40872-4_1226-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Morosoff, Nicholas. "Surface Modification by Plasma Polymerization." In Innovations in Materials Processing, 471–81. Boston, MA: Springer US, 1985. http://dx.doi.org/10.1007/978-1-4613-2411-9_25.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Nitschke, Mirko. "Plasma Modification of Polymer Surfaces and Plasma Polymerization." In Polymer Surfaces and Interfaces, 203–14. Berlin, Heidelberg: Springer Berlin Heidelberg, 2008. http://dx.doi.org/10.1007/978-3-540-73865-7_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Yasuda, H. "Plasma polymerization and plasma modification of polymer surfaces." In New Methods of Polymer Synthesis, 161–96. Dordrecht: Springer Netherlands, 1995. http://dx.doi.org/10.1007/978-94-011-0607-8_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kumar, Avishek, Daniel Grant, Surjith Alancherry, Ahmed Al-Jumaili, Kateryna Bazaka, and Mohan V. Jacob. "Plasma Polymerization: Electronics and Biomedical Application." In Plasma Science and Technology for Emerging Economies, 593–657. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-4217-1_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Plasma polymerization"

1

Cademartiri, Ludovico, Reihaneh Malakooti, Georg von Freymann, Yasemin Akçakir, André C. Arsenault, Srebri Petrov, Andrea Migliori, et al. "Nanocrystal Plasma Polymerization." In PHYSICS OF SEMICONDUCTORS: 28th International Conference on the Physics of Semiconductors - ICPS 2006. AIP, 2007. http://dx.doi.org/10.1063/1.2730258.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Fernandez-Martinez, Ivan, V. Bellido-Gonzalez, B. Daniel, J. Brindley, and H. Li. "Thin Film Vacuum Plasma Polymerization Processes." In Society of Vacuum Coaters Annual Technical Conference. Society of Vacuum Coaters, 2015. http://dx.doi.org/10.14332/svc15.proc.1960.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Cutshall, Daniel, Jae Young Kim, and Sung-O. Kim. "PPPS-2013: Intense atmospheric pressure plasma array for plasma polymerization." In 2013 IEEE 40th International Conference on Plasma Sciences (ICOPS). IEEE, 2013. http://dx.doi.org/10.1109/plasma.2013.6635047.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Zambare, M. S., S. W. Gosavi, and S. A. Gangal. "Electron beam resist preparation by plasma polymerization." In International Conference on Plasma Sciences (ICOPS). IEEE, 1993. http://dx.doi.org/10.1109/plasma.1993.593616.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sadhir, R. K., and H. E. Saunders. "Plasma polymerization: A new process for electronics." In 1985 EIC 17th Electrical/Electronics Insulation Conference. IEEE, 1985. http://dx.doi.org/10.1109/eic.1985.7458625.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Yablokov, M., A. Gilman, N. Surin, M. Augustyniak-Jablokow, K. Tadyszak, and A. Kuznetsov. "DC Discharge Plasma Polymerization of 1-Naphthylamine." In 13th International Conference on Plasma Surface Engineering September 10 - 14, 2012, in Garmisch-Partenkirchen, Germany. Linköping University Electronic Press, 2013. http://dx.doi.org/10.3384/wcc2.266-269.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kim, Dong Ha, Choon-Sang Park, Daseulbi Kim, Heung-Sik Tae, Bhum Jae Shin, and Jeong Hyun Seo. "Atmospheric Pressure Plasma Sources for Plasma Polymerization and Large Area Treatment." In 2017 IEEE International Conference on Plasma Science (ICOPS). IEEE, 2017. http://dx.doi.org/10.1109/plasma.2017.8496154.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Akhavan, B., K. Jarvis, and P. Majewski. "Development of hydrophobic silica powders using plasma polymerization technology." In 2012 IEEE 39th International Conference on Plasma Sciences (ICOPS). IEEE, 2012. http://dx.doi.org/10.1109/plasma.2012.6383876.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Esteve, Jaume, Francesc Benitez, Salvador Bosch, Elena Martinez, Miquel Galan, and Jordi Serrat. "Protective coatings for Al metallizations obtained by plasma polymerization." In International Symposium on Optical Science and Technology, edited by Michael L. Fulton. SPIE, 2000. http://dx.doi.org/10.1117/12.404758.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Guo, Ying, Jing Zhang, Jinzhou Xu, Rongming Zhou, and Jianyong Yu. "PTFE nanocrystallines by oriented plasma polymerization at atmospheric pressure." In Sixth International Conference on Thin Film Physics and Applications. SPIE, 2008. http://dx.doi.org/10.1117/12.792016.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Plasma polymerization' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography