Relevant bibliographies by topics / Plastic

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Plastic'

Author: Grafiati
Published: 4 June 2021
Last updated: 25 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Plastic.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Plastic"

1

Halim, Wandy, and Franky Liauw. "GALERI EDUKASI PLASTIK DENGAN PENDEKATAN METODE PERANCANGAN PLASTIS." Jurnal Sains, Teknologi, Urban, Perancangan, Arsitektur (Stupa) 3, no. 2 (2022): 1361. http://dx.doi.org/10.24912/stupa.v3i2.12297.

Full text
Abstract:
In human life, waste is a problem that will inevitably become, and will never end. This waste problem is caused by high human consumptive behavior. Plastic waste is one of the waste problems that need serious attention because the problem of plastic waste has become a global environmental problem. To be able to overcome this large plastic waste, it takes speed in absorbing plastic waste and its use in the field of processing because plastic waste is waste that is very difficult to decompose. In Indonesia, public awareness and knowledge of plastic waste are still very lacking, so that the proce
APA, Harvard, Vancouver, ISO, and other styles
2

Hadi, Sutopo, Yandri Yandri, and Tati Suhartati. "Penyuluhan Keselamatan Penggunaan Plastik Kemasan pada Makanan Bagi Ibu-Ibu PKK dan Masyarakat Di Desa Bumi Raharjo, Kecamatan Bumi Ratu Nuban, Lampung Tengah." SINAR SANG SURYA: Jurnal Pusat Pengabdian Kepada Masyarakat 6, no. 1 (2022): 210. http://dx.doi.org/10.24127/sss.v6i1.1903.

Full text
Abstract:
ABSTRAK Plastik adalah suatu produk kimia yang telah dikenal dan digunakan secara luas oleh seluruh lapisan masyarakat, baik yang bermukim di pedesaan apalagi yang tinggal di kota-kota besar. Saat ini setiap hari ketergantungan terhadap plastik semakin tinggi, namun bahayanya kurang disadari oleh masyarakat. Sesungguhnya penggunaan bahan plastik dalam konsumsi makanan tidak perlu ditakutkan, asalkan kita tahu cara menggunakannya dengan benar. Bagi masyarakat awam, cara mudah untuk menghindari bahaya plastik, yaitu dengan membedakan antara plastik untuk kemasan makanan dan untuk keperluan lainn
APA, Harvard, Vancouver, ISO, and other styles
3

Aravik, Havis, Hoirul Amri, and Choiriyah Choiriyah. "Operasi Plastik Dalam Perspektif Hukum Islam." Mizan: Journal of Islamic Law 2, no. 2 (2018): 183. http://dx.doi.org/10.32507/mizan.v2i2.296.

Full text
Abstract:
Abstract.This study discusses how the legal position of plastic surgery is in the perspective of Islamic law. The results of this study state that plastic surgery is one of the problems faced by Muslims in the contemporary era. Plastic surgery is generally divided into two parts, namely plastic surgery which is permitted because for the purpose of plastic surgery and surgery that is forbidden because to beautify themselves. The necessity of plastic surgery to beautify oneself because it brings a lot of harm not only to the perpetrator, but also acts that include actions to change Allah's creat
APA, Harvard, Vancouver, ISO, and other styles
4

Kholidah, Neneng Rika Jazilatul, Sarjono Sarjono, Yuniarta Ita Purnama, and Yupita Yupita. "Pemanfaatan Botol Bekas menjadi Tempat Pensil yang Bernilai Seni dan Ekonomis di Kelas V SDN Samberan Kecamatan Kanor Kabupaten Bojonegoro." J-ABDIPAMAS (Jurnal Pengabdian Kepada Masyarakat) 4, no. 1 (2020): 127. http://dx.doi.org/10.30734/j-abdipamas.v4i1.852.

Full text
Abstract:
ABSTRACTThe purpose of this community service program is the utilization of bottles become an aesthetic and economic pancil case at State Elementary School Samberan Kanor Bojonegoro to reduce the negative effect of plastic waste. The aims of this program are: (1) to give the knowledge and training for State Elementary School Samberan students about the utilization of secondhand goods to be beneficial pancil cases; (2) to improve the creativities of State Elementary School Samberan students in the utilization of plastic bottle; (3) to give the creative ideas to students, So  they can follow th
APA, Harvard, Vancouver, ISO, and other styles
5

Kamsiati, Elmi, Heny Herawati, and Endang Yuli Purwani. "POTENSI PENGEMBANGAN PLASTIK BIODEGRADABLE BERBASIS PATI SAGU DAN UBIKAYU DI INDONESIA / The Development Potential of Sago and Cassava Starch-Based Biodegradable Plastic in Indonesia." Jurnal Penelitian dan Pengembangan Pertanian 36, no. 2 (2017): 67. http://dx.doi.org/10.21082/jp3.v36n2.2017.p67-76.

Full text
Abstract:
<p>Plastic is a packaging materials that are widely used but has an adverse impact on the environment because it is difficult to degrade in nature. Production technology of biodegradable plastics from natural resources that have characteristic environmentally friendly has developed. Starch-based biodegradable plastic is a widely developed type because the production process is simple and the raw materials more readily available. The starch of cassava and sago has potential as a raw material of biodegradable plastic because of the availability and its characteristic. Also, to make starch
APA, Harvard, Vancouver, ISO, and other styles
6

Dian Eksana Wibowo, Endaryanta,. "UPAYA MENINGKATKAN KUAT GESER TANAH LEMPUNG DENGAN MEMANFAATKAN LIMBAH PLASTIK." INERSIA lnformasi dan Ekspose Hasil Riset Teknik Sipil dan Arsitektur 12, no. 1 (2016): 1–12. http://dx.doi.org/10.21831/inersia.v12i1.10341.

Full text
Abstract:
ABSTRACTThe objectives of this study was to determine: (1) the effect of the addition of plastic waste ofmineral watercontainers (in some variations and percentages) to qu (the value of unconfined compressive strength) of clay, (2)the effect of the addition of the plastic waste to φ (the shear strength) of clay, (3) the effect of the addition of theplastic waste to c (the adhesiveness) of clay. This study applied anexperiment method. The plastics were cut intothe sizes of 1x1 cm and 1x0,5 cm, then they were mixed in the clay, compacted, and then tested. Theclaysamples were taken from Wates (Jl
APA, Harvard, Vancouver, ISO, and other styles
7

Munggaran, Gilang Anugerah, Ananda Kezia Nashra Rahmadita, and Lisma Dila Samallo. "PEMBERDAYAAN MASYARAKAT SEKITAR UNIVERSITAS MUHAMMADIYAH JAKARTA MELALUI EDUKASI PENGELOLAAN LIMBAH PLASTIK." AS-SYIFA : Jurnal Pengabdian dan Pemberdayaan Kesehatan Masyarakat 5, no. 1 (2024): 46–55. https://doi.org/10.24853/assyifa.5.1.46-55.

Full text
Abstract:
Limbah plastik terus meningkat sebagai akibat dari peningkatan penggunaan plastik oleh masyarakat. Hal ini disebabkan oleh meningkatnya jumlah produk plastik sekali pakai yang digunakan oleh orang-orang tetapi tidak sebanding dengan bagaimana mereka menangani serta mengelola limbah plastik tersebut. Diperlukan upaya edukasi akan pengelolaan limbah plastik yang berwawasan lingkungan agar dapat mengurangi jumlah limbah plastik yang ada. Tujuan dari pemberdayaan masyarakat ini ialah untuk mengetahui sejauh mana pengetahuan Mahasiswa/i UMJ mengenai pengelolaan limbah plastik. Metode yang dilakukan
APA, Harvard, Vancouver, ISO, and other styles
8

Endaryanta, Endaryanta, and Dian Eksana Wibowo. "Pemanfaatan dan Modifikasi Limbah Plastik untuk Perbaikan Sifat Teknik (Kuat-Geser) Tanah Lempung." INERSIA lnformasi dan Ekspose Hasil Riset Teknik Sipil dan Arsitektur 12, no. 2 (2017): 103–13. http://dx.doi.org/10.21831/inersia.v12i2.12585.

Full text
Abstract:
ABSTRACTThis study aims to determine: (1) the value of unconfined compressive strength (qu) clay mixed shredded plastic waste serrated; (2) the value of the internal friction angle (φ) soil mixed shredded plastic waste serrated; (3) the value of soil friction (c) soil mixed shredded plastic waste serrated. This study used an experimental method. Plastic waste is cut by the jagged edges 1x1 cm and 1x0,5 cm then mixed in clay, compacted, and then tested robust free press and direct shear. Clay samples taken at elevation -0.30 m of area from Punukan Kulon Progo and Kasongan Bantul. Waste plastics
APA, Harvard, Vancouver, ISO, and other styles
9

Ousterhout, Douglas K., and Eric J. Stelnicki. "Plastic Surgery’s Plastics." Clinics in Plastic Surgery 23, no. 1 (1996): 183–90. http://dx.doi.org/10.1016/s0094-1298(20)31149-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Haug, R. H. "Plastic surgery's plastics." Journal of Oral and Maxillofacial Surgery 54, no. 12 (1996): 1477. http://dx.doi.org/10.1016/s0278-2391(96)90277-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Plastic"

1

LINDSTRAND, NILS, and KARL THUNELL. "From Plastic to Paper Mapping the real cost of plastics." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-224931.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Sævik, Svein. "On stresses and fatigue in flexible pipes." Norway : Dept. of Marine Structures, the University of Trondheim, 1992. http://catalog.hathitrust.org/api/volumes/oclc/27348152.html.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Zolotaryova, A. "Plastic surgery." Thesis, Сумський державний університет, 2013. http://essuir.sumdu.edu.ua/handle/123456789/33929.

Full text
Abstract:
Plastic surgery is a medical specialty concerned with the correction or restoration of form and function. Though cosmetic or aesthetic surgery is the best-known kind of plastic surgery, most plastic surgery is not cosmetic: plastic surgery includes many types of reconstructive surgery, hand surgery, microsurgery, and the treatment of burns. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/33929
APA, Harvard, Vancouver, ISO, and other styles
4

Kaartinen, Johanna. "A Checklist for Plastic Product Design: Preventing Pitfalls in a Design Process and Premature Failures of Plastic Products." Thesis, Högskolan i Skövde, Institutionen för ingenjörsvetenskap, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-9683.

Full text
Abstract:
Designing an injection molded plastic part requires optimizing the part with respect to various stakeholders’ needs throughout its life cycle. The conditions in which a product is operating in service are often inadequately understood or specified, resulting in wrong material selection, which in turn leads to failure when the product is used. Many aspects interrelate with the initial part design and the essential rules of each should be taken into account to ensure a well-functioning plastic product. Regardless, a part design often passes sequentially from concept development to the manufactur
APA, Harvard, Vancouver, ISO, and other styles
5

Mali, Sarvesh. "Study on plastic and mechanical properties of plastic stabilized returned plastic concretes containing supplementary cementitious materials." Thesis, Curtin University, 2016. http://hdl.handle.net/20.500.11937/1068.

Full text
Abstract:
The growing concern for ready mix concrete industry is the disposal of returned unused concrete. In a plastic state, the concrete is a perishable product and the disposal of any unused concrete provides a set of challenges. However, little is known about the most effective parameters for recycling of returned plastic concrete without adversely affecting its properties. The present research has conducted laboratory trials to establish an optimal process for stabilizing returned plastic concretes using set-retarding admixture called “stabilizer”. Three types of cements, widely used in constructi
APA, Harvard, Vancouver, ISO, and other styles
6

Doshi, Shailesh R. "A novel coextrusion process for the manufacture of short fiber-reinforced thermoplastic pipe /." Thesis, McGill University, 1986. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=72817.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Pitteri, Silvio. "Processing and evaluation of filled thermoplastics." Thesis, Brunel University, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.253309.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Burt, Christopher. "Plastic scintillation spectrometry." Thesis, University of Southampton, 2009. https://eprints.soton.ac.uk/72351/.

Full text
Abstract:
Plastic scintillators provide homeland security organisations with large area, low cost gamma-ray counters at international borders. Currently these detectors connot distinguish between the sources they detect, leading to high false alarm rates during primary screening. These alarms must be followed up by time consuming secondary screening techniques using spectroscopic detectors. Here we review current PVT scintillators and present a range of techniques that optimise their characteristics. By combining these optimisations with Symetrica's spectral deconvolution and isotope identification soft
APA, Harvard, Vancouver, ISO, and other styles
9

Busillo, Eric. "Characterization of plastic hypodermic needles." Thesis, Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/26584.

Full text
Abstract:
Thesis (M. S.)--Mechanical Engineering, Georgia Institute of Technology, 2009.<br>Committee Chair: Colton, Jonathan; Committee Member: Ku, David; Committee Member: Prausnitz, Mark. Part of the SMARTech Electronic Thesis and Dissertation Collection.
APA, Harvard, Vancouver, ISO, and other styles
10

Al-Ati, Tareq. "Oxygen permeation of virgin HDPE films versus recycled HDPE films /." Online version of thesis, 1994. http://hdl.handle.net/1850/11875.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Plastic"

1

Moser, Richard. Plastic Tests Plastics. Springer Fachmedien Wiesbaden, 2015. http://dx.doi.org/10.1007/978-3-658-10530-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Gracco, Luca Scacchi. Pensieri di plastica =: Plastic thoughts. A. Mondadori, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gracco, Luca Scacchi. Pensieri di plastica =: Plastic thoughts. Arnoldo Mondadori Editore, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

M, Finlayson Kier, ed. Plastic film technology. Technomic Pub. Co., 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Mitchell, Melanie. Plastic. Lerner, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Langley, Andrew. Plastic. Wayland, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Mayer, Cassie. Plastic. Heinemann Library, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Langley, Andrew. Plastic. Crabtree Pub., 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Llewellyn, Claire. Plastic. Franklin Watts, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Rau, Dana Meachen. Plastic. Marshall Cavendish Benchmark, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Plastic"

1

Moser, Richard. "Introduction." In Plastic Tests Plastics. Springer Fachmedien Wiesbaden, 2015. http://dx.doi.org/10.1007/978-3-658-10530-3_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Moser, Richard. "Fundamentals of Elasticity." In Plastic Tests Plastics. Springer Fachmedien Wiesbaden, 2015. http://dx.doi.org/10.1007/978-3-658-10530-3_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Moser, Richard. "Design of the Measurement Device." In Plastic Tests Plastics. Springer Fachmedien Wiesbaden, 2015. http://dx.doi.org/10.1007/978-3-658-10530-3_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Moser, Richard. "Pertinent Example Measurements." In Plastic Tests Plastics. Springer Fachmedien Wiesbaden, 2015. http://dx.doi.org/10.1007/978-3-658-10530-3_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Moser, Richard. "Conclusion & Outlook." In Plastic Tests Plastics. Springer Fachmedien Wiesbaden, 2015. http://dx.doi.org/10.1007/978-3-658-10530-3_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Calkins, Meg. "Plastics and Plastic Products." In Details and Materials for Resilient Sites. Routledge, 2025. https://doi.org/10.4324/9781003413974-23.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kruse, Katrin, Katrin Knickmeier, Dennis Brennecke, Bianca Unger, and Ursula Siebert. "Plastic Debris and Its Impacts on Marine Mammals." In Marine Mammals. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-06836-2_4.

Full text
Abstract:
AbstractIn recent decades, global plastic consumption has rapidly increased. Large quantities of plastics enter the environment in various ways, often ending up in the oceans. Plastic debris is nowadays found in any aquatic ecosystems. Due to its long durability, plastics may drift around with ocean currents for decades. Nowadays, plastic debris can be found in any aquatic ecosystem. Eventually, plastics decay into smaller fragments and sink to the seafloor. Marine mammals are affected by plastics in three major ways: They confuse large pieces of plastics with food, they become entangled in fi
APA, Harvard, Vancouver, ISO, and other styles
8

Nørregård-Rasmussen, Asger, Malte Hertz-Jansen, and Felicitas Schmittinger. "Maker—Plastic In, Plastic Out: Circular Economy and Local Production." In Springer Series in Design and Innovation. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-78733-2_6.

Full text
Abstract:
AbstractRecognising the lack of local and economically accessible facilities, technologies, and public engagement in local recycling, the chapter tackles the challenge of introducing Circular Economy to cope with plastic waste in Copenhagen. The need for circular systemic innovation and holistic production models for recycling plastics led to consider how local micro entrepreneurs, SMEs, commercial resellers and citizens can collaborate for a common, sustainable goal. The chapter presents ‘Plastic In, Plastic Out’ (PIPO), a Circular system for local sourcing, recycling and production of sustai
APA, Harvard, Vancouver, ISO, and other styles
9

Woldeamanuel, Mintesnot G. "Plastic bottles; plastic problems." In Urban Issues in Rapidly Growing Cities. Routledge, 2020. http://dx.doi.org/10.4324/9780429344831-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Marron, Donncha. "Plastic Credit, Plastic Lifestyles." In Consumer Credit in the United States. Palgrave Macmillan US, 2009. http://dx.doi.org/10.1057/9780230101517_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Plastic"

1

O'Neal, Sean P., Nerine J. Cherepy, Saphon Hok, Steve A. Payne, and Charles R. Hurlbut. "Bismuth-loaded plastic scintillators." In Hard X-Ray, Gamma-Ray, and Neutron Detector Physics XXVI, edited by Nerine J. Cherepy, Michael Fiederle, and Ralph B. James. SPIE, 2024. http://dx.doi.org/10.1117/12.3029881.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hutton, L. Ted. "AWS Plastic Welding Implementation." In CORROSION 2000. NACE International, 2000. https://doi.org/10.5006/c2000-00536.

Full text
Abstract:
Abstract This paper will discuss the current specifications, thermoplastic welder qualification methods and test procedures for thermoplastic weldments. A listing of numerous sources for thermoplastic specifications will be part of the presentation. This is recommended for engineers, designers, QA personnel, maintenance personnel and others that use, specify or inspect thermoplastic vessels, lined tanks or other thermoplastic assembles that require a weld.
APA, Harvard, Vancouver, ISO, and other styles
3

Guenther, Karl H. "Coating Of Plastics - Coatings On Plastic." In 1988 Los Angeles Symposium--O-E/LASE '88, edited by Max J. Riedl. SPIE, 1988. http://dx.doi.org/10.1117/12.944471.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Shiri, Noel Deepak, Myriam Shankar Krafft, and Wolfram Thurm. "Plastic lumber product development using commingled waste plastics." In EMERGING TRENDS IN MECHANICAL ENGINEERING 2018. Author(s), 2019. http://dx.doi.org/10.1063/1.5092935.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Rattenbury, Tye, Dawn Nafus, and Ken Anderson. "Plastic." In the 10th international conference. ACM Press, 2008. http://dx.doi.org/10.1145/1409635.1409667.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sengar, Vibhuti S., and Jayant R. Haritsa. "PLASTIC." In the 2003 ACM SIGMOD international conference on. ACM Press, 2003. http://dx.doi.org/10.1145/872757.872867.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Elsharafi, Mahmoud, Cody Chancellor, Cameron Duckworth, et al. "Heat Transfer Technology to Convert Plastic Trash to Oil." In ASME 2017 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/imece2017-70953.

Full text
Abstract:
In modern society, plastic waste has become a serious environmental issue. The inability of most hydrocarbon based plastics to naturally decompose quickly causes concern. The material piles up in landfills, waterways, and along the side of the road. One way to combat this issue is the repurposing of the material. Plastic can be converted back into oil (called pyrolysis) and refined to produce fuels. To attempt this, a custom-built steel reactor is to be filled with waste plastic, and will be heated to the plastic’s boiling point in an inert (N2) environment. The resulting vapor will be reconde
APA, Harvard, Vancouver, ISO, and other styles
8

Lindström, Kristina, and Åsa Ståhl. "Plastic imaginaries." In PDC '16: The 14th Participatory Design Conference. ACM, 2016. http://dx.doi.org/10.1145/2948076.2948117.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Jafri, Faiyaz. "Natural Plastic." In ACM SIGGRAPH 2010 Computer Animation Fesitval. ACM Press, 2010. http://dx.doi.org/10.1145/1836623.1836676.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Jiang, Yi, Yikang Wang, Zeyu Liu, and Chanjuan Chen. "Plastic Reduction." In Bridging the Divide. Iowa State University Digital Press, 2024. http://dx.doi.org/10.31274/itaa.17551.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Plastic"

1

Bernard, Sophie, Florence Lapointe, and Julien Martin. Where does our plastic waste go? CIRANO, 2024. http://dx.doi.org/10.54932/fkay1101.

Full text
Abstract:
Last Fall, the Federal Court declared invalid and unlawful the federal government Order that classified plastic articles as toxic under the Environmental Protection Act. The government quickly appealed the decision and the Federal Court of Appeal granted a stay motion which prevents the Federal court ruling from taking effect while the appeal is ongoing. Therefore, the Single-use Plastics Prohibition Regulations remain in force. Despite an acknowledgement that Canada must fight against plastic pollution, Canadian exports of plastic waste amounted to almost 175 thousand tonnes in 2022, hardly a
APA, Harvard, Vancouver, ISO, and other styles
2

Border, Peter. Proposals to increase UK recycling of plastic food packaging. Parliamentary Office of Science and Technology, 2020. http://dx.doi.org/10.58248/pb39.

Full text
Abstract:
Plastic packaging waste has become a key consumer concern. In the UK, over 2.2 million tonnes of plastic packaging enter the consumer market each year. Much of this is used in the food sector because plastic packaging is cheap, light to transport, hygienic, and can be used to extend the product's shelf-life. In the UK around 46% of plastic packaging is collected for recycling, mostly through local authority collections. However several issues with the current systems of plastics recycling persist. This POSTbrief reviews proposals to Defra and HM Treasury to improve plastics recycling in the UK
APA, Harvard, Vancouver, ISO, and other styles
3

Arboleda, Julio, and Evar Umeozor. Plastic to Oil: Saudi Arabia and Global Perspectives. King Abdullah Petroleum Studies and Research Center, 2023. http://dx.doi.org/10.30573/ks--2023-dp09.

Full text
Abstract:
Today, it is impossible to imagine life without plastics due to their flexible characteristics. However, the attractive characteristics of plastic in several industries are generating another global problem: waste plastic disposal. According to the “OECD Global Plastic Outlook” published in 2022, global plastic waste production increased by more than 2.25 times between 2000 and 2019 to 353.3 million tons (MMT). However, only 9% of that plastic waste is recycled.
APA, Harvard, Vancouver, ISO, and other styles
4

Rucevska, Ieva, Natalia Skripnikova, Carina Thomassen, et al. Climate Impacts of Plastics: Global Actions to Stem Climate Change and End Plastic Pollution. GRID-Arendal, 2024. http://dx.doi.org/10.61523/spyl9908.

Full text
Abstract:
Science provides convincing evidence that greenhouse gas emissions generated across the plastics life cycle are estimated to be between 3.8 and 4.5 per cent of global greenhouse gas emissions. This is set to grow with a projected increase in primary plastic production. This report presents the synthesis of an extensive literature review of the plastics life cycle. It analyses the countries’ submissions to the UNFCCC, the Paris Agreement, and the Intergovernmental Committee on plastic pollution. It also suggests measures that co-benefit addressing plastic pollution and achieving the global clim
APA, Harvard, Vancouver, ISO, and other styles
5

Saadeh, Shadi, and Pritam Katawał. Performance Testing of Hot Mix Asphalt Modified with Recycled Waste Plastic. Mineta Transportation Institute, 2021. http://dx.doi.org/10.31979/mti.2021.2045.

Full text
Abstract:
Plastic pollution has become one of the major concerns in the world. Plastic waste is not biodegradable, which makes it difficult to manage waste plastic pollution. Recycling and reusing waste plastic is an effective way to manage plastic pollution. Because of the huge quantity of waste plastic released into the world, industries requiring a large amount of material, like the pavement industry, can reuse some of this mammoth volume of waste plastics. Similarly, the use of reclaimed asphalt pavement (RAP) has also become common practice to ensure sustainability. The use of recycled waste plasti
APA, Harvard, Vancouver, ISO, and other styles
6

Haider, Syed Hussain, and Filippo Giustozzi. Recycled Plastic Waste in Papua New Guinea’s Road Infrastructure. Asian Development Bank, 2025. https://doi.org/10.22617/wps250189-2.

Full text
Abstract:
The use of recycled plastic waste in road construction encourages environmentally friendly infrastructure and promotes a circular economy by converting plastic waste into low-cost construction materials. Utilizing recycled plastics can enhance the performance and durability of roads, especially in hot climates, addressing climate adaptation and mitigation needs. This publication focuses on Port Moresby, Papua New Guinea, to foster a cultural shift toward reusing and recycling rather than relying on landfills, a critical issue in Pacific island countries.
APA, Harvard, Vancouver, ISO, and other styles
7

Bastos de Sousa, Fabiula Danielli. Plastics and the United Nations Sustainable Development Goals. Universidad de los Andes, 2024. https://doi.org/10.51573/andes.pps39.ss.psdgun.1.

Full text
Abstract:
Recent literature on the role of plastics in achieving the United Nations Sustainable Development Goals (SDGs) was analyzed. Despite contributing to the accomplishment of at least 15 SDGs, plastic pollution, especially marine pollution, outweighs the positive contribu tions of plastic to accomplishing the 2030 Agenda. The study, however, emphasized the vital importance of the circular economy, highlighting practices such as recycling as viable solutions to the socio-environmental problems that may be created by plastics.
APA, Harvard, Vancouver, ISO, and other styles
8

Baxter, John, Margareta Wahlstrom, Malin Zu Castell-Rüdenhausen, et al. Plastic value chains. Nordisk Ministerråd, 2014. http://dx.doi.org/10.6027/tn2014-542.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Castillo, T. Plastic encapsulated parts. Office of Scientific and Technical Information (OSTI), 1994. http://dx.doi.org/10.2172/10190938.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Wilson, Tiffany M. S., Michael J. King, and F. Patrick Doty. Plastic neutron detectors. Office of Scientific and Technical Information (OSTI), 2008. http://dx.doi.org/10.2172/946574.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Plastic' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography