Relevant bibliographies by topics / Plastic-composite properties

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Plastic-composite properties'

Author: Grafiati
Published: 4 June 2021
Last updated: 9 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Plastic-composite properties.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Plastic-composite properties"

1

Mitalova, Zuzana, Juliana Litecka, Dusan Mital, et al. "Destructive Testing of Wood Plastic Composite." Materiale Plastice 57, no. 2 (2019): 208–14. http://dx.doi.org/10.37358/mp.20.2.5367.

Full text
Abstract:
The paper deals with destructive testing of �new� group of material - Wood Plastic Composite (in short WPC). WPC emerging from a fusion of two different kinds of components - thermoplastics matrix and natural reinforcement (fibres or flour). Natural fibres offer several advantages - they are renewable, inexpensive, low-density, good isolate a sound and low cost. These components are mixed under the influence of high temperature and then pressed to make various shapes. This material contains cracks localized on the interface between the wood and plastic. These cracks occurred due to inhomogenei
APA, Harvard, Vancouver, ISO, and other styles
2

IIZUKA, Hiroshi, Takeshi KUNII, Akinori HAYASHI, and Kazuyuki KABE. "Mechanical Properties of a Plastic-Rubber Composite Material." NIPPON GOMU KYOKAISHI 73, no. 3 (2000): 152–58. http://dx.doi.org/10.2324/gomu.73.152.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hugot, Françoise, and Gilles Cazaurang. "Mechanical properties of an extruded wood plastic composite." Mécanique & Industries 10, no. 6 (2009): 519–24. http://dx.doi.org/10.1051/meca/2010010.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

TAKAKURA, Tsuyoshi, Takahide KUMAGAI, Shinji INAGAKI, Eisuke YAMADA, and Kazuhiro SONE. "Properties of Fullerene / Thermo plastic Polyurethane Composite Materials." Journal of The Adhesion Society of Japan 45, no. 9 (2009): 338–45. http://dx.doi.org/10.11618/adhesion.45.338.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Shen, De Jun, Zi Sheng Lin, and Yan Fei Zhang. "Study on the Mechanical Properties of Carbon Fiber Composite Material of Wood." Advanced Materials Research 1120-1121 (July 2015): 659–63. http://dx.doi.org/10.4028/www.scientific.net/amr.1120-1121.659.

Full text
Abstract:
through the use of domestic carbon fiber cloth and combining domestic fast-growing wood of Larch and poplar wood, the CFRP- wood composite key interface from the composite process, stripping bearing performance, Hygrothermal effect, fracture characteristics and shear creep properties to conducted the system research . Fiber reinforced composite (Fiber Reinforced Plastic/Polymer, abbreviation FRP) material by continuous fibers and resin matrix composite and its types, including carbon fiber reinforced composite (Carbon Fiber Reinforce Plastic/Polymer, abbreviation CFRP), glass fiber reinforced
APA, Harvard, Vancouver, ISO, and other styles
6

Pakeyangkoon, Pornsri, and Benjawan Ploydee. "Mechanical Properties of Acrylate-Styrene-Acrylonitrile/Bagasse Composites." Advanced Materials Research 747 (August 2013): 355–58. http://dx.doi.org/10.4028/www.scientific.net/amr.747.355.

Full text
Abstract:
Mechanical properties of wood plastic composite, prepared from acrylate-styrene-acrylonitrile (ASA) and bagasse, were investigated. In this study, 10 to 50 phr of bagasse were used in order to obtain the wood plastic composite with superior mechanical properties. The wood plastic composites in the study were prepared by melt-blending technique. All materials were mixed by using a two-roll-mill, shaped into sheets by a compression molding machine and the specimens were cut with a cutting machine. Youngs modulus, flexural strength, flexural modulus, impact strength and hardness of the wood plast
APA, Harvard, Vancouver, ISO, and other styles
7

Cheng, Rui Xiang, Ying Li, Qing Wen Wang, and Zhong Qiu Li. "The Bonding Properties of PVC Wood-Plastic Composite Materials Glued with Two Kinds of Adhesive." Advanced Materials Research 113-116 (June 2010): 1935–39. http://dx.doi.org/10.4028/www.scientific.net/amr.113-116.1935.

Full text
Abstract:
This paper aimed to confirm which adhesive is more suitable to glue the PVC wood-plastic composite materials between epoxy adhesive and J-39 acrylic ester adhesive. This paper tested compression shear strength and aging properties of PVC wood-plastic composite materials glued with these two adhesives. The results show that compression shear strength of PVC wood-plastic composite materials glued with epoxy adhesive is higher than with J-39 acrylic adhesives. Meanwhile, the setting time of two adhesives has effect on compression shearing strength. The results of aging properties after boiled and
APA, Harvard, Vancouver, ISO, and other styles
8

Sung, T. J., Taek Kyun Jung, Mok Soon Kim, and Sung Yi. "Processing and Properties of Al Based Amorphous/Crystalline Alloy Composites." Materials Science Forum 544-545 (May 2007): 431–34. http://dx.doi.org/10.4028/www.scientific.net/msf.544-545.431.

Full text
Abstract:
Three types of composite materials, Al-10Ni-6Ce (at%)/pure Al (Vf=0.3), Al-10Ni- 6Ce/Al-3.6Mn (Vf=0.3) and Al-10Ni-6Ce/Al-5.5Mg (Vf=0.3), and monolithic Al-10Ni-6Ce alloy were successfully fabricated to a fully dense rod-shaped bulk form having a diameter of about 10mm by adopting a powder forging or extrusion process using amorphous Al-Ni-Ce powder together with crystalline pure Al, Al-Mn and Al-Mg powders. The monolithic Al-Ni-Ce specimen forged at 648K showed a very high compressive strength of 1.3GPa without exhibiting any compressive plastic strain. All of the composite specimens forged a
APA, Harvard, Vancouver, ISO, and other styles
9

Zhang, Rong Hui, Jia Liu, Jian Chao Huang, and Yi Fu. "Rubber Modified Asphalt Mixture Properties and Mechanical Testing." Applied Mechanics and Materials 105-107 (September 2011): 810–17. http://dx.doi.org/10.4028/www.scientific.net/amm.105-107.810.

Full text
Abstract:
To solve the high-temperature rutting problem of asphalt pavement, the old rubber of the tire rubber and plastic of general polyethylene waste composite modified asphalt mixture is proposed. The plastic and rubber compound particle was made by the rubber through efficient desulfurization additives, pre-swelling, twin-screw extrusion equipment. The particles mixed with the asphalt mixtures specimen preparation and the dynamic stability experiments, composite beam fatigue experiments, flexural tensile strength and modulus experiments and anti-reflective pavement cracks and other mechanical exper
APA, Harvard, Vancouver, ISO, and other styles
10

Ohuchi, Hiromu, and Masamitsu Nishida. "Preparation and Piezoelectric Properties of Ceramics-Plastic Composite Materials." Japanese Journal of Applied Physics 30, Part 1, No. 9B (1991): 2336–38. http://dx.doi.org/10.1143/jjap.30.2336.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Plastic-composite properties"

1

Hardwick, S. T. "The origins and properties of transcrystalline layers in thermoplastics composites." Thesis, Brunel University, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.379414.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Adhikary, Kamal Babu. "Development of Wood Flour-Recycled Polymer Composite Panels As Building Materials." Thesis, University of Canterbury. Chemical and Process Engineering, 2008. http://hdl.handle.net/10092/1795.

Full text
Abstract:
Wood plastic composites (WPCs) were made using matrices of recycled high-density polyethylene (rHDPE) and polypropylene (rPP) with sawdust (Pinus radiata) as filler. Corresponding WPCs were also made using virgin plastics (HDPE and PP) for comparison with the recycled plastic based composites. WPCs were made through melt compounding and hot-press moulding with varying formulations based on the plastic type (HDPE and PP), plastic form (recycled and virgin), wood flour content and addition of coupling agent. The dimensional stability and mechanical properties of WPCs were investigated. Durabilit
APA, Harvard, Vancouver, ISO, and other styles
3

Guidigo, Jonathan. "Caractérisation physico-mécanique d’un composite bois polymère." Thesis, Université de Lorraine, 2017. http://www.theses.fr/2017LORR0229/document.

Full text
Abstract:
La présente étude fait suite à d’autres qui proposent une solution de récupération des déchets plastiques et de bois pour en faire un matériau de construction en composite bois-polymère. La particularité de ce travail de recherche est que la matrice thermoplastique utilisée est un ensemble de différents polymères pris dans des proportions bien définies. Les pourcentages considérés pour la matrice obtenue représentent les parts de déchets de polymères que l’on retrouve dans la ville de Cotonou (Bénin). Cette étude a consisté à fabriqué des échantillons de composite bois polymère CBP par extrusi
APA, Harvard, Vancouver, ISO, and other styles
4

Gren, Bernhäll Oscar, and Adam Nilsson. "Bestämning av mekaniskaegenskaper för ett bio-kompositmaterial." Thesis, Linnéuniversitetet, Institutionen för byggteknik (BY), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-68998.

Full text
Abstract:
The purpose of the work is the determination of flexural properties for thebiocomposite Durapulp. The study includes laborative tests on Durapulp andreference materials, commonly used in the building sector. Stiffness and strength of Durapulp show that it has the potential as a replacement for conventional wood-based materials.
APA, Harvard, Vancouver, ISO, and other styles
5

Li, Wei 1970 May 26. "Yield and geodesic properties of random elasto-plastic materials." Thesis, McGill University, 2008. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=115877.

Full text
Abstract:
Two topics, i.e., the scale effects and the geodesics of random heterogeneous materials will be discussed in this work.<br>When the separation of scales in random media does not hold, the representative volume element (RVE) of deterministic continuum mechanics does not exist in the conventional sense, and new concepts and approaches are needed. This subject is discussed here in the context of microstructures of two types - planar random chessboards, and planar random inclusion-matrix composites -- with microscale behavior being elastic-plastic-hardening (power-law). The microstructure is assum
APA, Harvard, Vancouver, ISO, and other styles
6

Ben'MBarek, Talel. "Utilisation d’une méthode optique sans contact pour décrire le comportement mécanique de composites bois/plastique ‘WPC’." Thesis, Pau, 2011. http://www.theses.fr/2011PAUU3035/document.

Full text
Abstract:
Dans cette étude, les propriétés mécanique et la microstructure du polyéthylène à haute densité (PEHD)/ fibres de bois (Pinmaritime) ont été caractérisés. Le comportement en traction et en flexion 4 points de composites fibres de bois/polyéthylène(WPC) avec et sans additif a été étudié en utilisant des mesures de champs par stéréo-corrélation d’image numériques. Nousavons tout d’abord comparé les mesures de déformation longitudinale par stéréo-corrélation d’image à celles mesurées parextensométrie mécanique au cours d’un essai de traction simple uni-axial. Les valeurs de déformation macroscopi
APA, Harvard, Vancouver, ISO, and other styles
7

Fan, Kin-ming, and 范健明. "Heat transfer properties and fusion behaviour of polymer based composite powders in selective laser sintering." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2004. http://hub.hku.hk/bib/B31245286.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Chandrashekhara, K. "Geometric and material nonlinear analysis of laminated composite plates and shells." Diss., Virginia Polytechnic Institute and State University, 1985. http://hdl.handle.net/10919/54739.

Full text
Abstract:
An inelastic material model for laminated composite plates and shells is formulated and incorporated into a finite element model that accounts for both geometric nonlinearity and transverse shear stresses. The elasto-plastic material behavior is incorporated using the flow theory of plasticity. In particular, the modified version of Hill's initial yield criterion is used in which anisotropic parameters of plasticity are introduced with isotropic strain hardening. The shear deformation is accounted for using an extension of the Sanders shell theory and the geometric nonlinearity is considered i
APA, Harvard, Vancouver, ISO, and other styles
9

永正, 邵., and Yongzheng Shao. "Study on the effects of matrix properties on the mechanical properties of carbon fiber reinforced plastic composites." Thesis, https://doors.doshisha.ac.jp/opac/opac_link/bibid/BB12902982/?lang=0, 2015. https://doors.doshisha.ac.jp/opac/opac_link/bibid/BB12902982/?lang=0.

Full text
Abstract:
It was found that a significant improvement of mechanical properties of CFRPs can be achieved by the adjustment of the matrix properties such as toughness and CF/matrix adhesion via the chemical modification, as well as the physical modification by a small amount of cheap and environment-friendly nano fibers. Based on investigation of fracture mechanisms at macro/micro scale, the effects of matrix properties and nano fiber on the mechanical properties of CFRP have been discussed. Subsequently, the relationship has been characterized by a numerical model to show how to modulate the parameters o
APA, Harvard, Vancouver, ISO, and other styles
10

Vos, Daniel J. "Engineering properties of wood-plastic composite panels." 1999. http://catalog.hathitrust.org/api/volumes/oclc/42139453.html.

Full text
Abstract:
Thesis (M.S.)--University of Wisconsin--Madison, 1999.<br>Typescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 110-113).
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Plastic-composite properties"

1

Sun, C. T. Characterization of elastic-plastic properties of AS4/APC-2 thermoplastic composite. Langley Research Center, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Adaskin, Anatoliy, Aleksandr Krasnovskiy, and Tat'yana Tarasova. Materials science and technology of metallic, non-metallic and composite materials. INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1143245.

Full text
Abstract:
Book 1 of the textbook consists of two parts. Part I describes the structure of metallic, non-metallic, and composite materials. Technologies of production of metal materials are considered: metallurgical production of ferrous and non-ferrous metals; powder metallurgy; technologies of production of non-metallic materials: polymers, glass, graphite; technologies of production of composite materials, including semi-finished products-prepregs, premixes. &#x0D; Part II is devoted to methods for studying the properties of materials. Metal materials, technologies of their hardening by thermal, chemi
APA, Harvard, Vancouver, ISO, and other styles
3

Cyclic plasticity and low cycle fatigue life of metals. Elsevier, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

International Symposium on Explosion, Shock Wave and Hypervelocity Phenomena (2nd 2007 Kumamoto, Japan). Explosion, shock wave and hypervelocity phenomena in materials II: Selected peer reviewed papers from the 2nd International Symposium on Explosion, Shock Wave and Hypervelocity Phenomena (ESHP-2), 6-9 March 2007, Kumamoto, Japan. Trans Tech Publications, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Characterization of elastic-plastic properties of AS4/APC-2 thermoplastic composite. Purdue University, School of Aeronautics and Astronautics, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Plastic-composite properties"

1

Guillet, Alain, E. Yama Nzoma, and Philippe Pareige. "Fabrication of Copper-Graphite Multifilamentary Composite Wire by Severe Plastic Deformation Microstructures and Electrical Properties." In Materials Science Forum. Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-985-7.817.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kimura, Souta, Jun Koyanagi, Takayuki Hama, and Hiroyuki Kawada. "Evaluation of the Interfacial Properties in Polymer Matrix Composite: Experiments and Elasto-Plastic Shear-Lag Analysis." In Engineering Plasticity and Its Applications. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-433-2.167.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Cui, Yi Hua, Stephen Lee, Bahman Noruziaan, Moe M. S. Cheung, and Jie Tao. "Fabrication and Properties of Absolutely Recycled Plastic Wood Composites." In Advances in Composite Materials and Structures. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-427-8.5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Gunyaev, G. "Effect of Carbon Fiber Properties on Carbon Fiber Reinforced Plastic Strength." In Developments in the Science and Technology of Composite Materials. Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-009-0787-4_73.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ozcan, Soydan, Jale Tezcan, Jane Y. Howe, and Peter Filip. "Study on Elasto-Plastic Behavior of Different Carbon Types in Carbon/Carbon Composites." In Mechanical Properties and Processing of Ceramic Binary, Ternary, and Composite Systems. John Wiley & Sons, Inc., 2009. http://dx.doi.org/10.1002/9780470456361.ch14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

"Appendix D: Plastic section properties for steel–concrete composite sections." In Steel–concrete composite bridges. Thomas Telford Publishing, 2005. http://dx.doi.org/10.1680/sccb.33429.bm04.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hickmann, Thorsten, Toni Adamek, Oliver Zielinski, and Thorsten Derieth. "Key Components in the Redox-Flow Battery: Bipolar Plates and Gaskets – Different Materials and Processing Methods for Their Usage." In Energy Storage Battery Systems - Fundamentals and Applications [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.94863.

Full text
Abstract:
Graphite filled thermoplastic based composites are an adequate material for bipolar plates in redox flow battery applications. Unlike metals, composite plates can provide excellent resistance to the highly aggressive chemical environment at elevated temperatures in combination with an electrochemical potential in battery operation. The chapter therefore gives an overview of the most important requirements for the graphite-plastic composite material and thus also for the bipolar plates, as well as the different characterization methods of the bipolar plates. In the following, both the modern composite materials based on polypropylene (PP) and polyvinylidene fluoride (PVDF) and their general properties are described with a focus on improved long-term stability. Furthermore, recycling is also considered. One section is dedicated to seals, which - as so often - are an underestimated component of redox flow batteries. In this gasket part of the chapter, the most common materials and interactions between gaskets and other stack components are presented, as well as the material properties, characterization and processing methods of the gaskets.
APA, Harvard, Vancouver, ISO, and other styles
8

Barbu, Marius C., Roman Reh, and Mark Irle. "Wood-Based Composites." In Research Developments in Wood Engineering and Technology. IGI Global, 2014. http://dx.doi.org/10.4018/978-1-4666-4554-7.ch001.

Full text
Abstract:
Wood composites are made from various wood or ligno-cellulosic non-wood materials (shape and origin) that are bonded together using either natural bonding or synthetic resin (e.g. thermoplastic or duroplastic polymers), or organic- (e.g. plastics)/inorganic-binder (e.g. cement). This product mix ranges from panel products (e.g., plywood, particleboard, strandboard, or fiberboard) to engineered timber substitutes (e.g., laminated veneer lumber or structural composite lumber). These composites are used for a number of structural and nonstructural applications in product lines ranging from interior to exterior applications (e.g. furniture and architectural trim in buildings). Wood composite materials can be engineered to meet a range of specific properties. When wood materials and processing variables are properly selected, the result can provide high performance and reliable service. Laminated composites consist of wood veneers bonded with a resin-binder and fabricated with either parallel- (e.g. Laminated Veneer Lumber with higher performance properties parallel to grain) or cross-banded veneers (e.g. plywood, homogenous and with higher dimensional stability). Particle-, strand-, or fiberboard composites are normally classified by density (high, medium, low) and element size. Each is made with a dry woody element, except for fiberboard, which can be made by either dry or wet processes. Hybrid composites based on wood wool, particles, and floor mixed with cement or gypsum are used in construction proving high weathering and fire resistance in construction. The mixture with plastics (PP or PE) and wood floor open a new generation of injected or molded Wood Plastic Composites (WPC), which are able to substitute plastics for some utilizations. In addition, sandwich panels with light core made from plastic foams or honeycomb papers are used in the furniture industry.
APA, Harvard, Vancouver, ISO, and other styles
9

Barbu, Marius C., Roman Reh, and Mark Irle. "Wood-Based Composites." In Materials Science and Engineering. IGI Global, 2017. http://dx.doi.org/10.4018/978-1-5225-1798-6.ch041.

Full text
Abstract:
Wood composites are made from various wood or ligno-cellulosic non-wood materials (shape and origin) that are bonded together using either natural bonding or synthetic resin (e.g. thermoplastic or duroplastic polymers), or organic- (e.g. plastics)/inorganic-binder (e.g. cement). This product mix ranges from panel products (e.g., plywood, particleboard, strandboard, or fiberboard) to engineered timber substitutes (e.g., laminated veneer lumber or structural composite lumber). These composites are used for a number of structural and nonstructural applications in product lines ranging from interior to exterior applications (e.g. furniture and architectural trim in buildings). Wood composite materials can be engineered to meet a range of specific properties. When wood materials and processing variables are properly selected, the result can provide high performance and reliable service. Laminated composites consist of wood veneers bonded with a resin-binder and fabricated with either parallel- (e.g. Laminated Veneer Lumber with higher performance properties parallel to grain) or cross-banded veneers (e.g. plywood, homogenous and with higher dimensional stability). Particle-, strand-, or fiberboard composites are normally classified by density (high, medium, low) and element size. Each is made with a dry woody element, except for fiberboard, which can be made by either dry or wet processes. Hybrid composites based on wood wool, particles, and floor mixed with cement or gypsum are used in construction proving high weathering and fire resistance in construction. The mixture with plastics (PP or PE) and wood floor open a new generation of injected or molded Wood Plastic Composites (WPC), which are able to substitute plastics for some utilizations. In addition, sandwich panels with light core made from plastic foams or honeycomb papers are used in the furniture industry.
APA, Harvard, Vancouver, ISO, and other styles
10

A. Dobrzański, Leszek. "Advanced Composites with Aluminum Alloys Matrix and Their Fabrication Processes." In Advanced Aluminium Composites and Alloys [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.98677.

Full text
Abstract:
This chapter introduces advanced aluminum alloy matrix composites and their manufacturing processes. In the beginning, the state of the art is characterized and the general characteristics of aluminum and its practical applications are presented, starting with the history of aluminum. The current approximate distribution of bauxite resources in the world and the production of bauxite and alumina in the leading countries of the world, as well as the production of primary and secondary aluminum and the range of aluminum end products, are presented. Aluminum alloys intended for plastic deformation and castings, and composite materials in general and with a matrix of aluminum alloys in particular, have been characterized in general. Against this background, a detailed review of the results of the Author’s own research included in numerous projects and own publications on advanced composite materials, their production technology, their structure, and properties were done. The range of aluminum alloy matrices of composite materials was adequately characterized, which include AlSi12, AlSi7Mg0.3, AlMg1SiCu, AlMg3, AlMg5, and AlMg9, respectively. Composite materials tested in terms of manufacturing technology include three groups. The first group includes gas pressure infiltration with liquid aluminum alloys of suitably formed porous preforms. Porous frameworks as a reinforcement for pressure-infiltrated composite materials with a matrix of aluminum alloys are produced by three methods. Al2O3 powder with the addition of 30–50% carbon fibers is uniaxially pressed, sintered, and heated to thermally degrade the carbon fibers and create the required pore sizes. In the second case, the ceramic porous skeleton is produced with the use of halloysite nanotubes HNTs by mechanical milling, press consolidation, and sintering. A third method is SLS selective laser sintering using titanium powders. Another group of manufacturing technologies is the mechanical synthesis of the mixture of AlMg1SiCu aluminum alloy powder and respectively, halloysite nanotubes HNTs in a volume fraction from 5 to 15% or multi-wall carbon nanotubes MWCNTs in a volume fraction from 0.5 to 5%, and subsequent consolidation involving plastic deformation. The third group of analyzed materials concerns composite surface layers on substrates of aluminum alloys produced by laser feathering of WC/W2C or SiC carbides. The structure and properties of the mentioned composite materials with aluminum alloys matrices are described in detail. The chapter summary provides final remarks on the importance of advanced aluminum alloy composite materials in industrial development. The importance of particular groups of engineering materials in the history and the development of the methodology for the selection of engineering materials, including the current stage of Materials 4.0, was emphasized. The importance of material design in engineering design is emphasized. Concepts of the development of societies were presented: Society 5.0 and Industry 4.0. The own concept of a holistic model of the extended Industry 4.0 was presented, taking into account advanced engineering materials and technological processes. Particular attention was paid to the importance of advanced composite materials with an aluminum alloy matrix in the context of the current stage of Industry 4.0 of the industrial revolution. Growth in the production of aluminum, its alloys, and composites with its matrix was compared with that of steel. Despite the 30 times less production, aluminum is important due to its lower density. The challenges posed by the development in the Industry 4.0 stage, including the expectations of the automotive and aviation industry, force constant progress in the development of new materials with the participation of aluminum, including the composite materials with an aluminum alloy matrix presented in this chapter.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Plastic-composite properties"

1

Baklanova, O. N., O. A. Knyazheva, and A. V. Lavrenov. "Plastic carbon composite rheological properties." In OIL AND GAS ENGINEERING (OGE-2018). Author(s), 2018. http://dx.doi.org/10.1063/1.5051840.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Mothilal, T., G. Ragothaman, D. Joseph Manuel, S. Socrates, and S. Mathavan. "Analysis on mechanical properties of wood plastic composite." In PROCEEDINGS OF INTERNATIONAL CONFERENCE ON RECENT TRENDS IN MECHANICAL AND MATERIALS ENGINEERING: ICRTMME 2019. AIP Publishing, 2020. http://dx.doi.org/10.1063/5.0024893.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wiegand, D. A. "Mechanical failure properties of composite plastic bonded explosives." In The tenth American Physical Society topical conference on shock compression of condensed matter. AIP, 1998. http://dx.doi.org/10.1063/1.55567.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Deni, Glar Donia, Shalihat Afifah Dhaningtyas, Ibnu Fajar, and Sudarno. "Characterization and evaluation physical properties biodegradable plastic composite from seaweed (Eucheuma cottonii)." In INTERNATIONAL CONFERENCE OF CHEMICAL AND MATERIAL ENGINEERING (ICCME) 2015: Green Technology for Sustainable Chemical Products and Processes. AIP Publishing LLC, 2015. http://dx.doi.org/10.1063/1.4938336.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Baoguo Li, Zhongli Pan, and Yi Zheng. "Properties of Medium-density Composite Particleboard from Creeping Wild Rye and HDPE Plastic." In 2007 Minneapolis, Minnesota, June 17-20, 2007. American Society of Agricultural and Biological Engineers, 2007. http://dx.doi.org/10.13031/2013.23528.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

NK, Sajeel, Karthik Kannan, Mohammad Houkan, Mohamed Ismail Saleh, and Kishor Kumar Sadasivuni. "Thermal, Electrical, and Sensing Properties of Composite Material from Environmental and Industrial Wastage." In Qatar University Annual Research Forum & Exhibition. Qatar University Press, 2020. http://dx.doi.org/10.29117/quarfe.2020.0105.

Full text
Abstract:
This work is an endeavour to contemplate a valueadded conductive plastic composite material derived as recycled plastic depending on Polyethylene (PP)/carbon black. We choose to add Carbon black (CB) as a filler material in order to enhance the electrical conductivity as well as other properties associated with the composite. Solution mixing method was adopted to develop this composite where the consequences of CB loadings on various parameters like processability, morphology and thermal stability of the composites were examined. Electrical conductivity increased with the increasing amount of
APA, Harvard, Vancouver, ISO, and other styles
7

MAKSSOUDI, Aziz EL, Hind ABDELLAOUI, Rachida EL OUATIB, and Mohamed TAHIRI. "Development of composite materials based on expanded perlite and plastic wastes. Mechanic-chemical properties." In Annual International Conference on Chemistry, Chemical Engineering and Chemical Process (CCECP 2014). GSTF, 2014. http://dx.doi.org/10.5176/2301-3761_ccecp14.06.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Solanki, Pranshoo, and Samikaran Bhattarai. "Properties of composite prepared by stabilizing soil with molten post-consumer plastic waste bottles." In Fifth International Conference on Sustainable Construction Materials and Technologies. Coventry University and The University of Wisconsin Milwaukee Centre for By-products Utilization, 2019. http://dx.doi.org/10.18552/2019/idscmt5045.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Nayeb Hashemi, Hamid, Gongdai Liu, Ashkan Vaziri, Masoud Olia, and Ranajay Ghosh. "Mechanical Properties of Biomimetic Leaf Composite." In ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-65503.

Full text
Abstract:
In this paper, we mimic the venous morphology of a typical plant leaf into a fiber composite structure where the veins are replaced by stiff fibers and the rest of the leaf is idealized as an elastic perfectly plastic polymeric matrix. The variegated venations found in nature are idealized into three principal fibers — the central mid-fiber corresponding to the mid-rib, straight parallel secondary fibers attached to the mid-fiber representing the secondary veins and then another set of parallel fibers emanating from the secondary fibers mimicking the tertiary veins of a typical leaf. The terti
APA, Harvard, Vancouver, ISO, and other styles
10

Ashrafi, Mahdi, Masoud Olia, Ashkan Vaziri, and Hamid Nayeb-Hashemi. "Optimizing the Mechanical Properties of Wood Plastic Composites Using Fiber-Glass." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-64043.

Full text
Abstract:
Wood plastic composites (WPC) are widely used in the industry due to its durability, low cost, and anti-moisture properties in comparison with the natural wood. Recently, WPC are also being considered in musical instrument industry. In this research, we have produced flout shaped WPC samples using African black wood powder and Phenolic resin in a hot compression molding set-up. Initial WPC composites were produced by systematically changing the wood volume fraction. The results showed cracks developed in composites with more than 70% wood. This was related to formation of gas in the system dur
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Plastic-composite properties"

1

Mackiewicz, James F., and Gary Proulx. Effect of Fiber-Reinforced Plastic Strength Properties on the Ballistic Performance of Ceramic Composite Armor. Defense Technical Information Center, 1998. http://dx.doi.org/10.21236/ada415841.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Plastic-composite properties' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography