Log in

Relevant bibliographies by topics / Plastic Flakes / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Plastic Flakes.

Dissertations / Theses on the topic 'Plastic Flakes'

Author: Grafiati

Published: 5 June 2025

Last updated: 2 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 22 dissertations / theses for your research on the topic 'Plastic Flakes.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Lechtape-Grüter, Reinhard. "Allotransplantation of free vascularised skin flaps." Thesis, University of Cape Town, 1988. http://hdl.handle.net/11427/26319.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Sjögren, Torsten. "Influences of the Graphite Phase on Elastic and Plastic Deformation Behaviour of Cast Irons." Doctoral thesis, Linköpings universitet, Konstruktionsmaterial, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-8776.

Full text

Abstract:

The amount and morphology of the graphite phase largely controls the resulting properties of cast iron. For instance, in flake graphite cast irons the mechanical properties are low while the thermal conductivity is high. This is in contrast with spheroidal graphite cast irons where the mechanical properties are high and the thermal conductivity is low. These differences are due to the different graphite morphologies and must be accounted for in the design work and material selection of cast iron components. In this work the influence of the graphite phase on the elastic and plastic deformation

APA, Harvard, Vancouver, ISO, and other styles

3

MOTA, Ana Karina Rodrigues da. "Avaliação do suprimento sanguíneo e sua influência na integração de flapes cutâneos para recobrimento de feridas traumáticas em cães (Canis familiaris, L. 1758)." Universidade Federal Rural de Pernambuco, 2009. http://www.tede2.ufrpe.br:8080/tede2/handle/tede2/5122.

Full text

Abstract:

Submitted by (edna.saturno@ufrpe.br) on 2016-07-29T16:28:33Z No. of bitstreams: 1 Ana Karina Rodrigues da Mota.pdf: 3329625 bytes, checksum: 379abeacf4a5e48a081f45029fe5f2cb (MD5)<br>Made available in DSpace on 2016-07-29T16:28:33Z (GMT). No. of bitstreams: 1 Ana Karina Rodrigues da Mota.pdf: 3329625 bytes, checksum: 379abeacf4a5e48a081f45029fe5f2cb (MD5) Previous issue date: 2009-02-26<br>The healing process is a sequence of biochemical and cellular events that starts from the loss of skin integrity, which is called a wound injury, which is considered of great importance in veterinary med

APA, Harvard, Vancouver, ISO, and other styles

4

Pandis, Laura. "SOSTITUTI BIOLOGICI VASCOLARI A BASE DI ACIDO IALURONICO." Doctoral thesis, Università degli studi di Padova, 2014. http://hdl.handle.net/11577/3423493.

Full text

Abstract:

The discovery of an adequate tissue substitute for the regeneration of small vessels has become one of the most debated issues in the last years. This is due to recent advances in regenerative medicine, which offers new cellular types and biomaterials, and the large clinical applications that this product may have, ranging from the replacement of the coronary vessels to correction of peripheral vascular malformations in pediatric patients. The biomaterials used so far for large caliber vascular prostheses have yielded disappointing results when applied in vessels with a smaller diameter than 6

APA, Harvard, Vancouver, ISO, and other styles

5

Lee, Sangjin. "Structure-Property Relationships in Composite Layers Polymeric Film/Foam Systems." Case Western Reserve University School of Graduate Studies / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=case1473444646138984.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Sipahioglu, Melike Bengu. "Effects Of Nanoadditives And Different Conventional Flame Retardants On The Flammability Of Polystyrene." Master's thesis, METU, 2012. http://etd.lib.metu.edu.tr/upload/12614395/index.pdf.

Full text

Abstract:

In this thesis, there were four purposes. The first one was to investigate effects of nanoclays (NC) on the flammability behavior of polystyrene (PS). The second purpose was to investigate contribution of nanoclays to the flame retardancy performance of conventional phosphorus based flame retardant<br>triphenyl phosphate (TPP) and its synergist melamine cyanurate (MCA). For the third purpose contribution of nanoclays to the flame retardancy performance of another conventional halogenated flame retardant<br>brominated epoxy polymer (BE) and its synergist antimony trioxide (AO) was investigated.

APA, Harvard, Vancouver, ISO, and other styles

7

Rawson, Keith William. "Shear controlled orientation effects with injection mouldings produced by the SCORIM process." Thesis, Brunel University, 1997. http://bura.brunel.ac.uk/handle/2438/6380.

Full text

Abstract:

Injection moulding using the process of Shear Controlled Orientation Injection Moulding (SCORIM) to enhance the aesthetic characteristics of plastics was investigated. Unsightly surface weld lines were successfully removed from highly reflective aluminium flake pigmented plastics by the application of a single macroscopic SCORIM shear when used in series with Bright Surface Moulding (BSM). A gonio spectrophotometer (GSP) was used for the quantitative characterisation of the Al flake pigmented mouldings as a measure of surface reflectivity and preferred angle of reflection. The different direct

APA, Harvard, Vancouver, ISO, and other styles

8

Nascimento, Ercilio Guimaraes do. "Neurofibromatose tipo 1: reparaÃÃo imediata com retalhos cutÃneos loco-regionais." Universidade Federal do CearÃ, 2004. http://www.teses.ufc.br/tde_busca/arquivo.php?codArquivo=210.

Full text

Abstract:

Instituto Dr. JosÃ Frota<br>A meta da presente pesquisa foi apresentar tÃcnicas cirÃrgicas associadas ou isoladas, na tentativa de, utilizando cirurgias menos traumÃticas e mais eficientes, proporcionar resultados menos estigmatizantes e deformantes para dar aos portadores da neurofibromatose tipo 1 (NF1) uma qualidade de vida mais digna e melhor integraÃÃo social. Estudou-se neste trabalho 30 pacientes portadores de NF1 por um perÃodo de seis anos, durante os quais se comparou a eficiÃncia de diversas tÃcnicas cirÃrgicas em lesÃes localizadas em vÃrias regiÃes anatÃmicas do corpo e cujas ress

APA, Harvard, Vancouver, ISO, and other styles

9

Donmez, Karadal Sibel. "Silicon-based Preceramic Polymers And Their Uses In Polymer Composites: Synthesis, Characterization And Processing." Master's thesis, METU, 2011. http://etd.lib.metu.edu.tr/upload/12613955/index.pdf.

Full text

Abstract:

The objectives of this study are to synthesize poly(dimethylsilane) (PDMS) preceramic polymer and to investigate its effect on morphology, flame retardant and mechanical properties of polypropylene (PP) based composites. There are mainly two parts in this thesis. In the first part, PDMS was synthesized by electrochemical polymerization of dichlorodimethylsilane, which was dissolved in 1,2 dimethoxyethane (DME) solvent consisting of tetrabutyl ammonium perchlorate (TBAP), as supporting electrolyte. PDMS was obtained in powder form and characterized with Fourier transform infrared, ultraviolet-

APA, Harvard, Vancouver, ISO, and other styles

10

Kilinc, Mert. "Production And Characterization Of Boron-based Additives And The Effect Of Flame Retardant Additives On Pet-based Composites." Phd thesis, METU, 2009. http://etd.lib.metu.edu.tr/upload/3/12610635/index.pdf.

Full text

Abstract:

For the aim of production of poly(ethylene terephthalate), PET based flame retardant composites<br>boron based flame retardant additives, 3.5 mole hydrated zinc borate and boron phosphate were synthesized. Zinc borate was synthesized with the reaction of boric acid and zinc oxide in both laboratory and pilot scale reactors. Effects of reaction parameters on kinetics of reaction and final product particle size were evaluated. Boron phosphate was synthesized via dry, wet and microwave methods. In addition to the synthesized flame retardant additives, several non-halogenated flame retardant addit

APA, Harvard, Vancouver, ISO, and other styles

11

Wong, William Chiu-Kit. "CFD Flame Spread Model Validation: Multi-Component Data Set Framework." Digital WPI, 2012. https://digitalcommons.wpi.edu/etd-theses/918.

Full text

Abstract:

"Review of the literature shows that the reported correlation between predictions and experimental data of flame spread vary greatly. The discrepancies displayed by the models are generally attributed to inaccurate input parameters, user effects, and inadequacy of the model. In most experiments, the metric to which the model is deemed accurate is based on the prediction of the heat release rate, but flame spread is a highly complex phenomenon that should not be simplified as such. Moreover, fire growth models are usually made up of distinctive groups of calculation on separate physical phen

APA, Harvard, Vancouver, ISO, and other styles

12

Montag, Eduardo. "Estudo anatômico comparativo entre o retalho glúteo femoral e o retalho vascularizado pelo vaso perfurante da artéria glútea inferior." Universidade de São Paulo, 2012. http://www.teses.usp.br/teses/disponiveis/5/5132/tde-01032013-133643/.

Full text

Abstract:

A despeito da evolução nos cuidados aos pacientes acamados, as úlceras de pressão encontram-se dentre os problemas que acometem estes indivíduos com grande impacto social e econômico. A reparação através de retalhos se estabeleceu como a terapêutica de escolha nos casos de úlceras em estágios avançados. As freqüentes recidivas devem ser consideradas pelo cirurgião durante todos os momentos do tratamento, de modo a não comprometer alternativas futuras durante a sua correção. O advento dos retalhos fasciocutâneos e vascularizados por artérias perfurantes permitiu o tratamento das úlceras de pres

APA, Harvard, Vancouver, ISO, and other styles

13

Okada, Alberto Yoshikazu. "Estudo crítico da anatomia do retalho neurovascular do músculo oblíquo interno com análise histomorfométrica e da incidência de alterações degenerativas dos seus pedículos arteriais." Universidade de São Paulo, 2014. http://www.teses.usp.br/teses/disponiveis/5/5132/tde-09022015-092532/.

Full text

Abstract:

Em 2002 foi descrito o retalho neurovascular de músculo oblíquo interno com um pedículo vascular e dois pedículos nervosos longos para tratamento em tempo único da paralisia facial, que permitiu a reanimação da região bucal e orbital, simultaneamente. Apesar das inúmeras vantagens teóricas deste retalho, há escassez de informações a respeito de suas características anatômicas. Neste estudo foi realizada dissecção em dezoito cadáveres frescos e não formolizados, num total de 36 retalhos retalhos neurovasculares do musculo oblíquo interno (MOI). Foram realizadas medidas diretas com o uso de paqu

APA, Harvard, Vancouver, ISO, and other styles

14

Ishida, Luiz Carlos. ""Estudo anatômico do retalho perfurante ântero-lateral da coxa"." Universidade de São Paulo, 2006. http://www.teses.usp.br/teses/disponiveis/5/5158/tde-04102006-130436/.

Full text

Abstract:

INTRODUÇÃO: O retalho ântero-lateral da coxa é baseado em vasos perfurantes do ramo descendente da artéria circunflexa lateral femoral. Este retalho tem características muito interessantes para a cirurgia reparadora, como a pequena espessura, pedículo longo e excelente área doadora. No entanto, existem muitas controvérsias na literatura quanto aos vasos perfurantes e ao trajeto do pedículo deste retalho. Neste trabalho procurou-se estabelecer alguns parâmetros anatômicos e esclarecer estas controvérsias. MÉTODO: Estudaram-se 100 coxas de 50 cadáveres quanto aos seguintes aspectos: 1- Número e

APA, Harvard, Vancouver, ISO, and other styles

15

Ishida, Luís Henrique. ""Estudo anatômico comparativo entre o retalho escapular e o retalho perfurante da artéria toracodorsal"." Universidade de São Paulo, 2006. http://www.teses.usp.br/teses/disponiveis/5/5158/tde-16102006-133859/.

Full text

Abstract:

Desde a primeira descrição do retalho perfurante de artéria toracodorsal (TAP), sua indicação tem sido questionada por se tratar de um retalho de características semelhantes aos retalhos fasciocutâneos escapulares baseados na artéria circunflexa escapular, que são bem conhecidos e reprodutíveis. Este estudo visa comparar características anatômicas destes dois retalhos, distinguindo-os para uma melhor indicação. Adicionalmente o estudo visa estudar o posicionamento do pedículo perfurante do retalho TAP. Vinte e um pares de retalhos (TAP e escapular) foram dissecados simultaneamente em cadáveres

APA, Harvard, Vancouver, ISO, and other styles

16

Sieira, Gil Ramón. "Planificación Preoperatoria en Cirugía Reconstructiva Mandibular. Estudio de cohortes prospectivas en planificación preoperatoria de microcirugía reconstructiva mandibular con colgajo libre de peroné, empleando diseño asistido por ordenador (CAD), modelos tridimensionales (3D), y placas de reconstrucción mandibular preformadas." Doctoral thesis, Universitat de Barcelona, 2014. http://hdl.handle.net/10803/291684.

Full text

Abstract:

Presentamos un estudio de tesis doctoral enfocado al estudio de la influencia de la planificación preoperatoria en cirugía reconstructiva de cabeza y cuello, concretamente en cirugía reconstructiva mandibular, valorando su influencia en la reducción del tiempo quirúrgico empleado para estos procedimientos y su influencia sobre la calidad de vida del paciente. La hipótesis de trabajo de este estudio piloto es que la planificación preoperatoria en cirugía reconstructiva mandibular supone una mejora en el tiempo quirúrgico de reconstrucción. Este tiempo quirúrgico de reconstrucción, se define

APA, Harvard, Vancouver, ISO, and other styles

17

Němec, Jaroslav. "Bytový dům v Bystřici nad Pernštejnem." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226694.

Full text

Abstract:

Project documentation in stage construction of the new building a four-storey residential building in,, Bystřice nad Pernštejnem " with establishment of the veterinary ambulance, and 7 bulit garages located in Bystřice Pernštejnem. Block of flats has 8 units. The building is designed as a regular block with projecting first Above ground floor south, north and east. The cladding is made from blocks SENDWIX system with external plastic contact insulation and window construction with triple glazing. The building has a flat roof. Conceptually, the building was designed as a passive house with the

APA, Harvard, Vancouver, ISO, and other styles

18

Hung, Hsiang-Hsin, and 洪祥鑫. "A study on electric conductivity of a conductive paint with silver-coated copper flakes in epoxy and the paint on carbon fiber reinforced plastic surface for copper electroplating in copper sulfate bath." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/90651863168200758407.

Full text

Abstract:

碩士<br>國立中興大學<br>材料科學與工程學系所<br>97<br>The study used different weight percent conductive paint with silver-coated copper flakes in epoxy on carbon fiber reinforced plastic surface , employ the electric conductivity of paint for copper electroplating in copper sulfate bath to avoid the complex processes and surface defects of electro-less plating on carbon fiber reinforced plastic surface. The result of the experiment , the electric resistance of carbon fiber reinforced plastic tube surface is about 1.279x10-3Ω.㎝ 2 , it can’t plated copper with copper sulfate bath. There is not having continuous

APA, Harvard, Vancouver, ISO, and other styles

19

Hung, Jie Sun, and 洪至善. "A Study of High Strength Conductive Plastics by Mixing with Aluminum-flake Fillers." Thesis, 1993. http://ndltd.ncl.edu.tw/handle/66244323825017531906.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Chen, Chien-Yun, and 陳建雲. "Research on Injection Molding and Properties Analysis with ABS+20wt%PC/Al Flake Metallized Plastic Pellets." Thesis, 1999. http://ndltd.ncl.edu.tw/handle/02609464850434093163.

Full text

Abstract:

碩士<br>淡江大學<br>機械工程學系<br>87<br>In present research, ABS+20wt%PC/Al flakes metallized plastic pellets are produced by injection molding. Through the metallized plastic, the material microstructure and Al flakes distribution observations, mechanical properties and EMI shielding effectiveness tests are done under different conditions of melt temperature, injection parameter, coupling agent and Al flake width. While the metallized plastic with 0.8mm Al flakes are injection molded in different melt temperatures (200℃, 240℃ and 270℃) and injection speeds (18%, 25% and 35%), it is found th

APA, Harvard, Vancouver, ISO, and other styles

21

Almutairi, Khalid Mutlag. "Three Dimensional Vascular Supply to Human Skeletal Muscles: An Anatomical Analysis of Potential Donor Muscles for Segmental Muscle Transfer." 2012. http://hdl.handle.net/10222/14594.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Santos, Mariana Louro. "Encerramento primário de defeitos cutâneos: da excisão fusiforme aos defeitos circulares." Master's thesis, 2019. http://hdl.handle.net/10316/89856.

Full text

Abstract:

Trabalho Final do Mestrado Integrado em Medicina apresentado à Faculdade de Medicina<br>Introdução: Os defeitos cutâneos resultantes da excisão de lesões cutâneas são normalmente circulares e o seu encerramento obriga geralmente à necessidade de desperdiçar uma quantidade variável de pele sã. Fatores como as linhas de tensão mínima, a localização do defeito, a elasticidade da pele e as comorbilidades do doente podem dificultar esta tarefa. Várias técnicas de encerramento têm vindo a ser criadas e reinventadas ao longo dos anos, de forma a obter resultados estéticos e funcionais favoráveis.Méto

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!