Relevant bibliographies by topics / Plastic Paper

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Plastic Paper'

Author: Grafiati
Published: 4 June 2021
Last updated: 27 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Plastic Paper.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Plastic Paper"

1

Rättö, Peter. "An investigation of friction mechanisms of paper-to-paper friction of coated papers." Nordic Pulp & Paper Research Journal 27, no. 1 (2012): 122–29. http://dx.doi.org/10.3183/npprj-2012-27-01-p122-129.

Full text
Abstract:
Abstract Different friction mechanisms for coated board were investigated. Friction due to adhesive forces, interlocking of asperities and plastic deformation, respectively, was evaluated for coated board. The measurements of friction were combined with measurements of surface energy and measurements of gloss variations. The samples coated with only latex showed significant frictional forces but no signs of polishing or plastic deformation. Friction seemed here to depend on adhesive forces and a correlation could be observed between the surface energy and the coefficients of friction. Adhesive
APA, Harvard, Vancouver, ISO, and other styles
2

Clutter, McLain. "Paper or Plastic." Journal of Architectural Education 69, no. 2 (2015): 198–99. http://dx.doi.org/10.1080/10464883.2015.1063398.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Moelter, Matthew J. "Paper or plastic?" American Journal of Physics 59, no. 9 (1991): 775–76. http://dx.doi.org/10.1119/1.16724.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

McCormick, Devon. "Paper or plastic?" New Scientist 200, no. 2681 (2008): 21. http://dx.doi.org/10.1016/s0262-4079(08)62818-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Liu, Wei, Huayu Liu, Kun Liu, Haishun Du, Ying Liu, and Chuanling Si. "Paper-based products as promising substitutes for plastics in the context of bans on non-biodegradables." BioResources 15, no. 4 (2020): 7309–12. http://dx.doi.org/10.15376/biores.15.4.7309-7312.

Full text
Abstract:
As a global environmental problem, plastic pollution has attracted worldwide attention. Plastic wastes not only disrupt ecosystems and biodiversity, but they also threaten human life and health. Countries around the world have enacted regulations in recent years to limit the use of plastics. Paper products have been proposed as promising substitutes for plastics, which undoubtedly brings unprecedented opportunities to the pulp and paper industry. However, paper products have some deficiencies in replacing certain plastic products. Research and development to improve paper properties and reduce
APA, Harvard, Vancouver, ISO, and other styles
6

Basale, Kanchan, Pooja Jagtap, Yogita Midgule, and Manjiri Hulpale. "Review Paper on “Manufacturing and Testing of Plastic Tiles”." Journal of Advances and Scholarly Researches in Allied Education 15, no. 2 (2018): 683–85. http://dx.doi.org/10.29070/15/56952.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Moy, Chun-Hung, Lian-See Tan, Noor Fazliani Shoparwe, Azmi Mohd Shariff, and Jully Tan. "Comparative Study of a Life Cycle Assessment for Bio-Plastic Straws and Paper Straws: Malaysia’s Perspective." Processes 9, no. 6 (2021): 1007. http://dx.doi.org/10.3390/pr9061007.

Full text
Abstract:
Plastics are used for various applications, including in the food and beverage industry, for the manufacturing of plastic utensils and straws. The higher utilization of plastic straws has indirectly resulted in the significant disposal of plastic waste, which has become a serious environmental issue. Alternatively, bio-plastic and paper straws have been introduced to reduce plastic waste. However, limited studies are available on the environmental assessment of drinking straws. Life cycle assessment (LCA) studies for bio-plastic and paper straws have not been comprehensively performed previous
APA, Harvard, Vancouver, ISO, and other styles
8

Zhou, Ziheng. "Analysis on Chinas Plastic Control Based on Promotion Challenges of Plastic Ban and Degradable Plastic." Applied and Computational Engineering 3, no. 1 (2023): 305–8. http://dx.doi.org/10.54254/2755-2721/3/20230502.

Full text
Abstract:
The production of plastics has made many aspects of modern life easier, but at the expense of the environment in ways that cannot be reversed. Since every country began enacting its own set of regulations to curb the manufacturing and consumption of conventional plastics, the question of biodegradable polymers has been at the forefront of public discourse. The use of biodegradable plastic is fraught with difficulties that need for decisive measures to be taken in light of extensive research. The paper highlights the urgent need to stress plastic pollution, and it analyzes the progress and curr
APA, Harvard, Vancouver, ISO, and other styles
9

Hasnat, Md Abul, and Mohammad Atikur Rahman. "A review paper on the hazardous effect of plastic debris on marine biodiversity with some possible remedies." Asian Journal of Medical and Biological Research 4, no. 3 (2018): 233–41. http://dx.doi.org/10.3329/ajmbr.v4i3.38461.

Full text
Abstract:
The consequences of plastic debris in the marine environment were reviewed, and possible solutions were presented. The extent of marine plastic debris-related problems surpasses many other marine problems, as plastics may be transported globally and no unaffected areas seem to exist. Many animal species are in risk, most commonly studied are the effects on marine mammals and seabirds. Marine plastic debris creates new concerns such as entanglement, ghost fishing, and impaction of digestive tracts in animals. It also increases the severity of already existing concerns such as transport, exposur
APA, Harvard, Vancouver, ISO, and other styles
10

Rifa, Tasfiea, and Mohammad Belayet Hossain. "Micro Plastic Pollution in Southasia: The Impact of Plastic Pollution over the Unsustainable Development Goals." Lex Publica 9, no. 2 (2023): 01–28. http://dx.doi.org/10.58829/lp.9.2.2022.01-28.

Full text
Abstract:
Abstract.
 One of the most pressing environmental issues facing the world right now is plastic waste. Once in the environment, plastics continuously degrade into microplastics, which are fragments of plastic. There are more national and international promises to reduce microplastic pollution as the world's plastic production rises. National governments are increasingly banning single-use plastic products or imposing taxes on them. Consider the UN Sustainable Development Goals, the UN Environment Assembly Resolutions on Marine Litter and Microplastics, and Addressing Single-Use Plastic Pro
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Plastic Paper"

1

LINDSTRAND, NILS, and KARL THUNELL. "From Plastic to Paper Mapping the real cost of plastics." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-224931.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Mitchell, Jonathan. "Recycled polymers reinforced with paper plastic laminates." Thesis, Imperial College London, 2014. http://hdl.handle.net/10044/1/58274.

Full text
Abstract:
The aim of this research project was to develop new structural materials from the paper plastic laminate (PPL) waste stream. PPLs containing both paper fibre and plastic coatings are problematic for non-thermal recycling options. The current end of life disposal for PPL is primarily landfill. This work focuses on combining PPL wastes with recycled plastics to produce paper plastic composites (PPCs) that can be used as raw materials for a variety of applications. Plastic from a material recycling facility (MRF) consisting of polyolefins, together with polypropylene (PP) from Waste Electrical an
APA, Harvard, Vancouver, ISO, and other styles
3

Parolo, Claudio. "Plastic and paper platforms for nanoparticle based immunosensors." Doctoral thesis, Universitat Autònoma de Barcelona, 2013. http://hdl.handle.net/10803/133317.

Full text
Abstract:
La tesis titulada “Plastic and paper platforms for nanoparticle based immunosensors” presentada como compendio de publicaciones, muestra avances significativos en el campo de los biosensores ópticos y electroquímicos. En la introducción (Capítulo 1) se presenta la importancia que tienen tanto los sensores inmunológicos basados en nanopartículas como los biosensores basados en plataformas de papel y nanomateriales para aplicaciones en diagnóstico. Ambas plataformas destacan por la versatilidad y facilidad de uso, bajo coste y tamaño reducido, lo que hace que sean unos dispositivos excelent
APA, Harvard, Vancouver, ISO, and other styles
4

James, Aaron. "Development of composites materials from waste paper and plastic." Australian Digital Thesis Program, 2006. http://adt.lib.swin.edu.au/public/adt-VSWT20070130.165426/index.html.

Full text
Abstract:
Thesis (PhD) - Swinburne University of Technology, Industrial Research Institute Swinburne - 2006.<br>A thesis submitted for the degree of Doctor of Philosophy, Industrial Research Institute Swinburne, Swinburne University of Technology - 2006. Typescript. "August 2006". Includes bibliographical references (p. 361-389).
APA, Harvard, Vancouver, ISO, and other styles
5

Tiggelman, Ineke. "Migration of organic contaminants through paper and plastic packaging." Thesis, Stellenbosch : Stellenbosch University, 2012. http://hdl.handle.net/10019.1/20269.

Full text
Abstract:
Thesis (MSc)--Stellenbosch University, 2012.<br>ENGLISH ABSTRACT: The presence of mineral oils in dry foodstuff was found to originate from the packaging materials, namely, paperboard manufactured from recovered fibres, and these oils subsequently migrate to the foodstuff via the vapour phase. The presence of mineral oils in food is of concern as it originates from the use of paper products not originally intended for food contact applications, i.e., before the paper is subjected to a suitable recycling process. These mineral oils consist of technical grade compounds which may contain ar
APA, Harvard, Vancouver, ISO, and other styles
6

Officer, Simon J. "Alternative strategies for security labelling/encoding of paper and plastic products." Thesis, Robert Gordon University, 2005. http://hdl.handle.net/10059/983.

Full text
Abstract:
A literature and patent review of current optical security techniques has been carried out and identified a need in the market for an improved optical security label to rival molecular fluorescent dyes. The label proposed was a rare earth (RE) doped borosilicate glass host that was excited and fluoresced in the visible region. Suitable RE dopants were found to be europium, terbium and dysprosium. The ability to triple dope a single glass and to be able to detect all three dopants based on their discrete fluorescence signals and unique fluorescence lifetimes has been achieved with an in-situ de
APA, Harvard, Vancouver, ISO, and other styles
7

Bengtsson, Mattias, Mikael Gustafsson, and Per Leino. "From paper to plastic – En studie om tidningens egenskaper och läsarnas användningsmönster." Thesis, Halmstad University, School of Information Science, Computer and Electrical Engineering (IDE), 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-1828.

Full text
Abstract:
<p>E-papperet är ett medie som i framtiden kan komma att användas för att läsa </p><p>dagstidningar. Istället för att bläck trycks på papperet så visar e-papperet informationen </p><p>genom att små partiklar på papperets yta byter färg vilket innebär att samma e- </p><p>pappersark kan innehålla och visa ett stort antal sidor. Nya medier blir sällan accepterade </p><p>utan att det funnits länkar till tidigare eller existerade tekniker. Denna studie ämnar </p><p>kartlägga tidningsläsarnas användningsmönster och papperstidningens egenskaper för att </p><p>understödja utformningen av morgondagens
APA, Harvard, Vancouver, ISO, and other styles
8

Prall, Katharina. "The Viscoelastic Behavior of Pigmented Latex Coating Films." Fogler Library, University of Maine, 2000. http://www.library.umaine.edu/theses/pdf/PrallK2000.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kawahara, Jun, Ersman Peter Andersson, Kazuya Katoh, and Magnus Berggren. "Fast-switching printed organic electrochemical transistors including electronic vias through plastic and paper substrates." Linköpings universitet, Fysik och elektroteknik, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-92763.

Full text
Abstract:
A novel vertical architecture for all-printed organic electrochemical transistors, based on poly(3, 4-ethylenedioxythiophene):poly(styrene sulfonate), realized on flexible substrates, is reported. The transistors are manufactured along both faces of plastic or paper substrates and via connections are realized using laser ablation or simple punch through using a pin. Successful modulation of the electric current that flows between the two sides of the substrate is achieved using electrolyte-gating and electrochemical modulation of the electronic charge transport of the bulk of the transistor ch
APA, Harvard, Vancouver, ISO, and other styles
10

Rasaratnam, Vallabesan. "Co-processing of coal with high energy fuel recovered from plastic and paper wastes." Thesis, University of Ulster, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.274095.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Plastic Paper"

1

Committee on the Administration of Justice. Plastic bullets: A briefing paper. Committee on the Administration of Justice, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Trieschmann, Werner. Paper or plastic?: A comedy. Dramatic Pub., 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Weizer, William P., and Sarah R. Sphar. Paper versus plastic in packaging. Freedonia Group, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Trieschmann, Werner. Paper or plastic?: A comedy. Dramatic Pub., 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Salzman, Frederick M. Paper or Plastic?: 101 ingenious uses for plastic grocery bags. F.M. Salzman, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Plotkin, L. G. Tekhnologii͡a︡ i oborudovanie propitki bumagi polimerami. 2nd ed. Lesnai͡a︡ promyshl., 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Plastic Laminates Short Course (1992 Atlanta, Ga.). 1992 Plastic Laminates Short Course: Westin Peachtree Plaza Hotel, Atlanta, GA, August 17-20. Tappi Press, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

FILM-PAK, '87 (1st 1987 Atlanta Ga ). Proceedings of Film-Pak '87: First International Conference on Advanced Films, Foils, and Multilayer Structure. Ryder Associates, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

European, Polymers Films Laminations and Extrusion Coatings Conference (8th 2001 Barcelona). 2001, 8th European Polymers, Films, Laminations and Extrusion Coatings Conference. Tappi Press, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Polymers, Laminations, and Coatings Conference (1987 San Francisco, Calif.). 1987 Polymers, Laminations and Coatings Conference: Westin St. Francis, San Francisco, CA, September 9-11. TAPPI Press, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Plastic Paper"

1

Gooch, Jan W. "Plastic Paper." In Encyclopedic Dictionary of Polymers. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_8831.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hwang, Kun. "How to Write a Paper? Plastic Surgeon as an Author." In Good Physician, Good Plastic Surgeon. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-1864-1_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Thornton, E. Lexus, Avery Hartley, Daniel Caudill, Martin Gamesu, Julius Schoop, and Fazleena Badurdeen. "Evaluating the Sustainability of Paper and Plastic Substitute Material LimeX." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-28839-5_120.

Full text
Abstract:
AbstractWith the increasing decline in the environment and natural resources it is important to find new ways in which manufacturing can increase the sustainability of the world. This study seeks to compare LimeX, a state-of-the-art paper and plastic alternative primarily made of limestone, with conventional paper and plastic materials. For a better understanding of LimeX as a material, a brief investigation of the mechanical and chemical properties will be performed through experimentation and analysis. In addition, this paper aims to evaluate the sustainability of LimeX through the analysis
APA, Harvard, Vancouver, ISO, and other styles
4

Bell, John. "Old and New Materials: Wood, Paper, Metal, Plastic, Bone." In American Puppet Modernism. Palgrave Macmillan US, 2008. http://dx.doi.org/10.1057/9780230613768_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Berg, Elena, Pia Wagner, Gonsalves Grünert, et al. "Sustainable Plastic Packaging from Sorted Municipal Waste and Its Life Cycle Assessment Using Digital Product Passports." In Zukunftstechnologien für den multifunktionalen Leichtbau. Springer Fachmedien Wiesbaden, 2024. https://doi.org/10.1007/978-3-658-45889-8_29.

Full text
Abstract:
AbstractPlastic waste from packaging is being repurposed to create new products with similar processing and usage properties as virgin plastics. Understanding its composition, degradation processes, and recycling steps is essential to open up new fields of applications. To shed light on sustainable uses of recycled plastics in packaging, this paper presents interdisciplinary research which investigates and connects three areas to a holistic product view from the material to the end of production. The first area focusses on the exploration of recyclate applications by analysing and processing d
APA, Harvard, Vancouver, ISO, and other styles
6

Shahbazi, Sasha, Patricia van Loon, Martin Kurdve, and Mats Johansson. "Metal and Plastic Recycling Flows in a Circular Value Chain." In Towards a Sustainable Future - Life Cycle Management. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-77127-0_18.

Full text
Abstract:
AbstractMaterial efficiency in manufacturing is an enabler of circular economy and captures value in industry through decreasing the amount of material used to produce one unit of output, generating less waste per output and improving waste segregation and management. However, material types and fractions play an important role in successfulness of recycling initiatives. This study investigates two main fractions in automotive industry, namely, metal and plastic. For both material flows, information availability and standards and regulations are pivotal to increase segregation, optimize the co
APA, Harvard, Vancouver, ISO, and other styles
7

Klotzbach, Annett, Mosarouf Hossain, Dieter Luong, and Philipp Götze. "Fabrication of Media-Tight Connections Between Metal and Plastics Using HyJOIN® Technology." In Zukunftstechnologien für den multifunktionalen Leichtbau. Springer Fachmedien Wiesbaden, 2024. https://doi.org/10.1007/978-3-658-45889-8_3.

Full text
Abstract:
AbstractThermal direct joining with hyJOIN® enables quick and reliable connections between metal and plastics without any additional material like screws, rivets or adhesives. Due to its reversibility, it facilitates the implementation of new repair and recycling strategies while at the same time minimizing the consumption of resources.During joining the parts are pressed together. At the same time, electromagnetically induced eddy currents heat the metal. The plastics softens in the contact area and binds to the metal surface during cooling. As plastics often adhere poorly to metal, the surfa
APA, Harvard, Vancouver, ISO, and other styles
8

Lee, Kevin Jia, and Sook Fun Wong. "Recycled Mixed Plastic Fine Aggregate in Cement Concrete." In Springer Proceedings in Materials. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-72955-3_9.

Full text
Abstract:
AbstractThe literature extensively examines the utilization of sorted single-type plastic waste from post-consumer waste streams as a sustainable substitute for natural sand in cement concrete. However, severe heterogeneity of plastic waste in municipal solid waste streams, including variations in polymer types, grades, shapes, sizes, and cross-contamination with other commingled waste materials, poses a significant challenge in adopting findings from prior research that necessitates high-purity single-type plastic waste for concrete applications. This paper reports the characterization of cem
APA, Harvard, Vancouver, ISO, and other styles
9

Bhaskaran, Vignesh, Harish Gireesan, Supriya Tumkur Shashishekar, Avishkar Kanagaraj, Desigan Vincent Selvaraj Virgindevi, and Bernd Muschard. "Circular Economy Business Model for 3D Printing Filament Production in Vietnam." In Lecture Notes in Mechanical Engineering. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-93891-7_92.

Full text
Abstract:
Abstract This paper explores the sustainability potential of low-cost 3D printing in Vietnam by evaluating the impact of a PET recycler called Polyformer, which converts plastic bottles into filament for 3D printing, creating sustainable business models. It addresses the growing challenge of plastic waste by reducing environmental impacts, creating economic opportunities for low-income individuals, and promoting localized manufacturing to strengthen knowledge transfer on circular economy aspects. The paper presents business case scenarios that demonstrate the economic viability of selling recy
APA, Harvard, Vancouver, ISO, and other styles
10

Wang, Shiyi. "The Conflict Between Paper Industry and Plastic Industry and the Future Development Prospects Under the Background of China’s “Plastic Ban”." In Applied Economics and Policy Studies. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-7826-5_127.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Plastic Paper"

1

Kelley, Don, and Thom Johnson. "Best Practices: the Use of Fiberglass Reinforced Plastic in Pulp and Paper Processing." In CORROSION 2013. NACE International, 2013. https://doi.org/10.5006/c2013-02628.

Full text
Abstract:
Abstract Fiberglass reinforced plastic (FRP) made from epoxy vinyl ester resin is the preferred material of construction for piping, ductwork, tanks, hoods, scrubbers, and stacks in pulp and paper processing plants. The conversion of wood to paper requires the use of highly corrosive bleaching chemicals that have proven to be far too harsh for conventional materials such as stainless steel and tile linings. Furthermore, FRP provides a considerably more economical alternative to high nickel alloys and other expensive specialty metals. The purpose of this paper will be to explore the diverse app
APA, Harvard, Vancouver, ISO, and other styles
2

Hutton, L. Ted. "AWS Plastic Welding Implementation." In CORROSION 2000. NACE International, 2000. https://doi.org/10.5006/c2000-00536.

Full text
Abstract:
Abstract This paper will discuss the current specifications, thermoplastic welder qualification methods and test procedures for thermoplastic weldments. A listing of numerous sources for thermoplastic specifications will be part of the presentation. This is recommended for engineers, designers, QA personnel, maintenance personnel and others that use, specify or inspect thermoplastic vessels, lined tanks or other thermoplastic assembles that require a weld.
APA, Harvard, Vancouver, ISO, and other styles
3

Stephans, Larry C. "The Design of Masonry/Plastic Lining Composite Structures." In CORROSION 1997. NACE International, 1997. https://doi.org/10.5006/c1997-97363.

Full text
Abstract:
Abstract The continued development of plastics with improved corrosion resistance has extended the conditions in which plastics can perform satisfactorily as corrosion resistant linings on steel. The use of a masonry lining over the plastic “membrane” further extends the conditions of service to higher temperatures and more severe mechanical conditions. This type of composite structure consisting of a steel vessel lined with a plastic membrane protected by brick set in resin and/or inorganic mortars presents a number of design challenges. The composite structure must be selected to perform sat
APA, Harvard, Vancouver, ISO, and other styles
4

Al Suwaiei, Fahad, Musab Al Husayni, Saeed Al Ghamdi, and Mohammed Kanwi. "The Transformation of Shipping & Transport Material to Polymer-Based Products. a Case Study of Wooden-to-Plastic Pallets." In MECC 2023. AMPP, 2023. https://doi.org/10.5006/mecc2023-20031.

Full text
Abstract:
Abstract It is assumed that conventional materials such as wood are superior for the transportation and storage of materials. This common misconception is a result of the lack of understanding and awareness about the sustainability effect of wood, the industry baseline, and the lack of knowledge about alternatives such as plastics. In reality, many cases have proven the contrary. For example, the utilization of plastic pallets has been proven to be the best option. This paper will examine the advantages, cost and technical comparisons between wood and plastic pallets. In addition, the transfor
APA, Harvard, Vancouver, ISO, and other styles
5

Kean, Robert T., and Boris A. Miksic. "Improved Packaging Film Incorporating Vapor Phase Corrosion Inhibitors and High Recycle Content." In CORROSION 2016. NACE International, 2016. https://doi.org/10.5006/c2016-07283.

Full text
Abstract:
Abstract Vapor Phase Corrosion Inhibitors (VCIs) are used for safe and cost-effective protection of a wide range of metal articles. One large market includes packaging materials for storage and transportation of metal parts. Plastic packaging films can be readily impregnated with VCIs to provide corrosion protection, in addition to the basic physical barrier (against water, dirt, vapors) afforded by the plastic. Generally, VCI containing plastic films are recyclable. Likewise, they can be made from recycled plastics. However, when manufacturing with commercially available recycle streams, use
APA, Harvard, Vancouver, ISO, and other styles
6

Jain, Eshika, and Ravi Kumar. "Efficient Waste Classification using Deep Learning: A Case Study with Garbage, Paper, and Plastic Bags using the EfficientNetB3 Model." In 2024 International Conference on Sustainable Communication Networks and Application (ICSCNA). IEEE, 2024. https://doi.org/10.1109/icscna63714.2024.10863966.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Bukhari, Muhammad Umaid, Kashif Riaz, Rehan Ahmed, et al. "Enhanced Area Triboelectric Nanogenerator Utilizing Recycled Single Used Plastic Bubble Wrap and Discarded Sketching Paper Ensuring Circularity of Material." In 2025 IEEE Conference on Technologies for Sustainability (SusTech). IEEE, 2025. https://doi.org/10.1109/sustech63138.2025.11025631.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Heffner, Dale K., and Kemal Tuzla. "Plastic Membranes Protected with Chemical Resistant Masonry." In CORROSION 1996. NACE International, 1996. https://doi.org/10.5006/c1996-96402.

Full text
Abstract:
Abstract Chemical Resistant Masonry exhibits excellent resistance to a broad range of corrosive chemical environments, such as dilute or concentrated acids, solvents, or alkalies. Chemical Resistant Masonry can withstand high temperatures that are beyond the limits of most common materials. No other material provides the superior chemical resistance and high thermal stability provided by chemical resistant masonry. Chemical Resistant Masonry itself is not a complete liquid barrier and is part of a three component system which includes brick, mortar, and membrane Many different plastic membrane
APA, Harvard, Vancouver, ISO, and other styles
9

Hillery, F. Edward. "Application and Design of Spring-Energized Plastic Seals." In CORROSION 1992. NACE International, 1992. https://doi.org/10.5006/c1992-92067.

Full text
Abstract:
Abstract The metallic spring-energized PTFE seal is about 35 years old and in it’s current stage of development can solve difficult sealing problems not possible with any other type of seal. This paper covers the history and development of the spring-energized PTFE seal and how the seal works. The effect of high and low temperatures and back pressure are covered for several different types of springs. The "low friction" characteristics of PTFE spring-energized PTFE seals are discussed. The spring-energized PTFE seal has very unique characteristics that make it suitable for many critical applic
APA, Harvard, Vancouver, ISO, and other styles
10

Willander, Magnus, Azam Khan, and Omer Nur. "Photonic devices on paper, plastic and textile fabrics." In SPIE OPTO, edited by Ferechteh Hosseini Teherani, David C. Look, and David J. Rogers. SPIE, 2013. http://dx.doi.org/10.1117/12.2010036.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Plastic Paper"

1

Committee on Toxicity. Position Paper on Ocean Bound Plastic (OBP). Committee on Toxicity, 2025. https://doi.org/10.46756/sci.fsa.mip511.

Full text
Abstract:
The Food Standards Agency (FSA) and Food Standards Scotland (FSS) sought an opinion from the Joint Expert Group for Food Contact Materials (FCMJEG) whether plastic materials from the open environment that are subsequently recycled could be safely utilised in food contact materials (FCMs). The FCMJEG assessed all available information, including all information and data submitted to the FSA following a call for evidence by the end of January 2024. Environmental or ocean bound plastic (OBP) is a relatively new input material for mechanical recycling and use in final recycled FCMs, hence the avai
APA, Harvard, Vancouver, ISO, and other styles
2

Young, Randy S. M-9 Chemical Paper Alternative Plastic Dispenser Feasibility Study. Defense Technical Information Center, 2000. http://dx.doi.org/10.21236/ada391362.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hanks, Andrew, Carolyn Gunther, Dean Lillard, and Robert Scharff. From Paper to Plastic: Understanding the Impact of eWIC on WIC Recipient Behavior. National Bureau of Economic Research, 2018. http://dx.doi.org/10.3386/w25131.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Barrowclough, Diana, and David Vivas Eugui. Plastic Production and Trade in Small States and SIDS: The Shift Towards a Circular Economy. Commonwealth Secretariat, 2021. https://doi.org/10.14217/comsec.10.

Full text
Abstract:
This paper focuses not only on the special needs of small states and small island developing states (SIDS) in the challenge to reduce plastics pollution, production and trade, but also on the opportunities. It draws on new information made available in an UNCTAD prototype database that tracks trade in plastics across the entire life cycle and identifies phases in the plastics industry that could offer export opportunities to small states and SIDS. However, this kind of structural transformation will not happen by itself. Part of the solution will depend upon having coherent trade policies, ind
APA, Harvard, Vancouver, ISO, and other styles
5

Di Mario, Luca, Juergen Von Kories, and Mohammed Haikal. Metals and Plastic Recycling in Maldives. Asian Development Bank, 2023. http://dx.doi.org/10.22617/wps230010-2.

Full text
Abstract:
This working paper shows how Maldives can boost recycling to strengthen its solid waste management strategy, protect its blue ocean economy, and create green business opportunities to support its long-term sustainable growth. Estimating under 2 percent of plastic waste is recycled in the island nation, it outlines how factors including high costs, inefficient collection efforts, and a lack of reprocessing facilities are hobbling recycling efforts. It recommends Maldives set up public-private partnerships with waste exporters and recyclers, incentivize domestic demand, and build a modern waste
APA, Harvard, Vancouver, ISO, and other styles
6

Previtali, Marco, Matteo Ciantia, Saverio Spadea, Riccardo Castellanza, and Giovanni Crosta. Development of a macro-element model for rockfall steel wires using. University of Dundee, 2021. http://dx.doi.org/10.20933/100001232.

Full text
Abstract:
This paper aims to present a few aspects of the development of a plastic-hardening macro-element model for steel wires in flexible protection systems. First, the material behaviour is obtained using uniaxial tensile tests. Successively, the evolution of the elastic and plastic domain is obtained using a combination of physical tests, analytical models, and numerical simulations. Finally, the results obtained with the macro-element model are compared to those obtained using other approaches found in literature.
APA, Harvard, Vancouver, ISO, and other styles
7

Vito, L. F. Di, G. Mannucci, G. Demofonti, et al. CGX-00-003 Tenaris Double Joint for Deep Water Applications Subjected to Large Cyclic Plastic Strains. Pipeline Research Council International, Inc. (PRCI), 1994. http://dx.doi.org/10.55274/r0011808.

Full text
Abstract:
The evaluation of the defect tolerance assessment for girth welded joints of seamless pipes for off-shore applications when subjected to large cyclic plastic strains. The reeling laying technique, which is considered to be the most severe from this point of view, has been considered and studied in depth in order to determine how the several plastic strain cycles suffered by the joint during the laying could affect the defect tolerability. Advanced Engineering Critical Assessment methods have been considered in the analysis as the BS 7910 FAD approach implemented with the corrections recommende
APA, Harvard, Vancouver, ISO, and other styles
8

Oliynyk, Kateryna, and Matteo Ciantia. Application of a finite deformation multiplicative plasticity model with non-local hardening to the simulation of CPTu tests in a structured soil. University of Dundee, 2021. http://dx.doi.org/10.20933/100001230.

Full text
Abstract:
In this paper an isotropic hardening elastoplastic constitutive model for structured soils is applied to the simulation of a standard CPTu test in a saturated soft structured clay. To allow for the extreme deformations experienced by the soil during the penetration process, the model is formulated in a fully geometric non-linear setting, based on: i) the multiplicative decomposition of the deformation gradient into an elastic and a plastic part; and, ii) on the existence of a free energy function to define the elastic behaviour of the soil. The model is equipped with two bonding-related intern
APA, Harvard, Vancouver, ISO, and other styles
9

Melanie, Haupt, and Hellweg Stefanie. Synthesis of the NRP 70 joint project “Waste management to support the energy turnaround (wastEturn)”. Swiss National Science Foundation (SNSF), 2020. http://dx.doi.org/10.46446/publication_nrp70_nrp71.2020.2.en.

Full text
Abstract:
A great deal of energy can be sourced both directly and indirectly from waste. For example, municipal waste with an energy content of around 60 petajoules is incinerated in Switzerland every year. The energy recovered directly from this waste covers around 4 % of the Swiss energy demand. However, the greatest potential offered by waste management lies in the recovery of secondary raw materials during the recycling process, thus indirectly avoiding the energy-intensive production of primary raw materials. In order to optimise the contribution to the energy turnaround made by waste management, a
APA, Harvard, Vancouver, ISO, and other styles
10

Hing, Vutha. The Effects of COVID-19 on the Export Industry and Comparative Advantage of Cambodia. Cambodia Development Resource Institute, 2023. https://doi.org/10.64202/wp.139.202305.

Full text
Abstract:
The repercussions of COVID-19 resulted in global disruptions to supply and demand as well as shocks to the global production networks. This paper employs a trade analysis approach to assess the impacts of coronavirus on Cambodia’s export performance. Utilising Revealed Comparative Advantage (RCA) index, changes were analysed using data pre-and post-pandemic to explore the Kingdom’s competitiveness and dynamic export position during this time. We found evidence that COVID-19 has caused a 6 percent decline in Cambodia’s trade in 2020 and a further 7 percent decline in 2021. However, the effect v
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Plastic Paper' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography