Relevant bibliographies by topics / Plate design

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Plate design'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Plate design.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Plate design"

1

Lovíšek, Ján. "Optimal design of laminated plate with obstacle." Applications of Mathematics 37, no. 5 (1992): 321–42. http://dx.doi.org/10.21136/am.1992.104514.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hammad, Ahmed, Yehia Abdel-Nasser, Cristina Churiaque, and José María Sánchez-Amaya. "Rationally-Based Structural Design of Welded Plate Panels." Metals 11, no. 9 (2021): 1381. http://dx.doi.org/10.3390/met11091381.

Full text
Abstract:
This study predicts the behavior of welded plate panels (unstiffened plates) with different geometrical properties (slenderness ratio and aspect ratio) in order to address a rational structural design procedure, as these parameters are of great importance from a structural design perspective. Nonlinear finite element analysis has been used to simulate the butt-welding process of plate panels, giving the three-dimensional distribution of distortion and residual stresses induced by welding through the design of a moving heat source. The numerical results are validated with published experimental
APA, Harvard, Vancouver, ISO, and other styles
3

Vasilenko, N. V., A. E. Babenko, and A. Yu Chirkov. "Design of plate systems." Strength of Materials 17, no. 2 (1985): 244–50. http://dx.doi.org/10.1007/bf01532375.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Rhodes, J. "Microcomputer design analysis of plate post-buckling behaviour." Journal of Strain Analysis for Engineering Design 21, no. 2 (1986): 71–76. http://dx.doi.org/10.1243/03093247v212071.

Full text
Abstract:
Explicit formulae are presented for the examination of plate post-buckling behaviour. Plates with simply supported loaded ends and having simply supported, fixed, or some intermediate, elastic restraint on edge rotation are considered, and it is assumed that the unloaded edges are free to wave in their own plane. The coefficients used in the equations were derived on the basis of curve fitting to a large number of computer solutions and are applicable to any buckle half wavelength or rotational restraint condition normally found in engineering structures. These equations are sufficiently simpl
APA, Harvard, Vancouver, ISO, and other styles
5

Park, Si-Myung, Soyeon Park, Jieun Park, Minwook Choi, Laehyun Kim, and Gunwoo Noh. "Design process of patient-specific osteosynthesis plates using topology optimization." Journal of Computational Design and Engineering 8, no. 5 (2021): 1257–66. http://dx.doi.org/10.1093/jcde/qwab047.

Full text
Abstract:
Abstract To reduce complications related to the osteosynthesis plating system, the use of a patient-specific plate design was proposed. However, the issue of associated complications is still critical. Because existing patient-specific plate designs have mainly relied on parametric studies, a design method is needed that considers the complex factors influencing the performance of the reconstruction and that can be generalized for various patients. The goal of this study was to propose a design process that can strengthen the advantages of a customized plate to reduce patient discomfort and en
APA, Harvard, Vancouver, ISO, and other styles
6

Orton, Sarah L., David Barrett, Alaa El-Din Elsisi, Andrew Pelikan, and Hani Salim. "Finger-Plate and Flat-Plate Expansion Device Design Evaluation." Journal of Bridge Engineering 22, no. 12 (2017): 04017106. http://dx.doi.org/10.1061/(asce)be.1943-5592.0001156.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ham, Juh-Hyeok. "Design System of Doubler Plate of Ship Plate Members under Various In-plane and Out-of-plane Loads." Journal of the Society of Naval Architects of Korea 55, no. 6 (2018): 521–26. http://dx.doi.org/10.3744/snak.2018.55.6.521.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Hu, Jong Wan, and Jun Hyuk Ahn. "New Bolted End-Plate Connection Design." Advanced Materials Research 1025-1026 (September 2014): 878–84. http://dx.doi.org/10.4028/www.scientific.net/amr.1025-1026.878.

Full text
Abstract:
This paper is principally performed to survey end-plate connection are described in the next part based on ideal limit states. The determination of end-plate based on the full plastic strength of the steel beam in accordance with 2001 AISC-LRFD manual and AISC/ANSI 358-05 Specifications. The bolted connections considered herein were performed to include the end-plate component of moment connections. This study is intended to investigate economic design for end-plate connections. In addition, the proposed end-plate model is evaluated by comparing the required factored bolt strength. The end-pla
APA, Harvard, Vancouver, ISO, and other styles
9

Wu, Ming Qing, and Yi Cui. "A Plate Stamping Mould Design." Advanced Materials Research 912-914 (April 2014): 1580–83. http://dx.doi.org/10.4028/www.scientific.net/amr.912-914.1580.

Full text
Abstract:
The design for a plate of cold stamping die design, Analysis of the technology of first part, determine the mould structure scheme, design choose zero, components, mainly to the punch, concave die, die and punch, design, drawing mould assembly drawing.
APA, Harvard, Vancouver, ISO, and other styles
10

Wang, Rui Feng, Xiao Jin Fu, and Wei Xu. "License Plate Recognition System Design." Applied Mechanics and Materials 738-739 (March 2015): 639–42. http://dx.doi.org/10.4028/www.scientific.net/amm.738-739.639.

Full text
Abstract:
The license plate recognition system is an important part of modern traffic management. application which is very extensive. In this paper, a method to achieve three main modules split from the image pre-processing, license plate location and character. Image pre-processing module of this article is to image gray and step by Roberts operator edge detection. License plate positioning and segmentation using mathematical morphology is used to determine the license plate location method, and then use the license plate color information of color segmentation method to complete the license plate par
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Plate design"

1

Guo, Kunpeng. "Optimisation of plate/plate-fin heat exchanger design." Thesis, University of Manchester, 2015. https://www.research.manchester.ac.uk/portal/en/theses/optimisation-of-plateplatefin-heat-exchanger-design(e019a7a5-4be1-4350-b219-3387fd12f7d1).html.

Full text
Abstract:
With increasing global energy consumption, stringent environmental protection legislation and safety regulations in industrialised nations, energy saving has been put under high priority. One of the most efficient ways of energy reduction is through heat transfer enhancement for additional heat recovery. Applying compact heat exchanger is one of the main strategies of heat transfer enhancement. However, the application of compact heat exchangers is prohibited by the lack of design methodology. Therefore, the aim of this research is to tackle the problem of developing optimisation methodologies
APA, Harvard, Vancouver, ISO, and other styles
2

Jackson, D. O. "The effect of plate geometry upon plate heat exchanger perormance." Thesis, University of Bradford, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.376714.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Dollhopf, Matthew John. "NASCAR RESTRICTOR PLATE EXHAUST MANIFOLD DESIGN STRATEGIES." Master's thesis, University of Central Florida, 2004. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/4456.

Full text
Abstract:
This paper presents the results of a study on exhaust manifold design for a NASCAR Restrictor plate internal combustion engine. A computer simulation model was developed using Ricardo WAVE software. WAVE is a computer-aided engineering code developed by Ricardo to analyze the dynamics of pressure waves, mass flows and energy losses in ducts, plenums and the intake and exhaust manifolds of various systems and machines. [1] The model was validated against experimental data from a current NASCAR Winston Cup restrictor plate motor. The parameters studied have been exhaust manifold diameters and le
APA, Harvard, Vancouver, ISO, and other styles
4

Ober, Eric R. "Simplified design of moment end-plate connections." Thesis, This resource online, 1995. http://scholar.lib.vt.edu/theses/available/etd-08142009-040605/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Han, Hyoseop. "LRFD design of plate girders for buildings." Thesis, Kansas State University, 1985. http://hdl.handle.net/2097/9846.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Baglin, Paul Stuart. "Plate reinforcement for shear : the analysis, design and detailing of plate reinforced concrete beams." Thesis, University of Dundee, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.245280.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Easter, Scott F. "Design of a multi-span plate girder highway bridge using LRFD bridge specifications." Master's thesis, This resource online, 1993. http://scholar.lib.vt.edu/theses/available/etd-04272010-020049/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Al-Zkeri, Ibrahim A. "Flow analysis inside shear and streamlined extrusion dies for feeder plate design." Ohio : Ohio University, 1999. http://www.ohiolink.edu/etd/view.cgi?ohiou1176230815.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hartman, Vile. "Spring and Plate Reverb Techniques In Games." Thesis, Högskolan i Skövde, Institutionen för informationsteknologi, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-12827.

Full text
Abstract:
In games, reverb is used to convey the audial space of game environments. This thesis explores the possibilities of using spring and plate reverb, and if they enhance or detract from the experience compared to a realistic natural reverb. Under evaluation, a quantitative study with a secondary qualitative discussion was carried out where participants played a gameplay prototype that switched between using spring reverb, plate reverb and a realistic natural reverb. A survey was answered relating to the gameplay sequence, which was used to evaluate how players perceived the differences in the dif
APA, Harvard, Vancouver, ISO, and other styles
10

Khorasani, Milad. "Rapid design of steel monosymmetric plate and box girders." Thesis, University of British Columbia, 2010. http://hdl.handle.net/2429/28007.

Full text
Abstract:
This thesis deals with the design process for steel plate girders and box girders. The design of plate girders is quite prescriptive. A more fundamental approach is required for the design of box girders. Equations explicitly for the design of plate and box girders are heavily influenced by empirical data. This work considers pure steel box girders only, and does not include the design of composite box girder sections. CAN/CSA-S6-00 “Canadian Highway Bridge Design Code” provides detailed design requirements for these composite girders. The design of plate girders follows mostly the requireme
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Plate design"

1

Jawad, Maan H. Design of plate and shell structures. ASME Press, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ngao-aram, S. Design methodology of plate heat exchangers. UMIST, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Birman, V. Plate Structures. Springer Science+Business Media B.V., 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Troitsky, M. S. Orthotropic bridges theory and design. 2nd ed. James F. Lincoln Arc Welding Foundation, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Weinand, Yves. Design of Integrally-Attached Timber Plate Structures. Routledge, 2021. http://dx.doi.org/10.1201/9781003139713.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Jawad, Maan H. Theory and Design of Plate and Shell Structures. Springer US, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Jawad, Maan H. Theory and design of plate and shell structures. Chapman & Hall, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Jawad, Maan H. Theory and Design of Plate and Shell Structures. Springer US, 1994. http://dx.doi.org/10.1007/978-1-4615-2656-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Concrete folded plate roofs. Arnold, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Samra, Arpinder Kaur. Optimum design of folded-plate structures subject to buckling constraints. University of Birmingham, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Plate design"

1

Gaddam, Subhash Reddy. "Flat-Plate Components." In Design of Pressure Vessels. CRC Press, 2020. http://dx.doi.org/10.1201/9781003091806-10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Muttoni, A., J. Schwartz, and B. Thürlimann. "Plane Stress, Plate and Shell Elements." In Design of Concrete Structures with Stress Fields. Birkhäuser Basel, 1997. http://dx.doi.org/10.1007/978-3-0348-9047-2_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

M°Kenzie, W. M. C. "Plate Girders." In Design of Structural Steelwork to BS 5950 and C-EC3. Macmillan Education UK, 1998. http://dx.doi.org/10.1007/978-1-349-14612-3_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Abu-Saba, Elias G. "Built-Up Beams: Plate Girders." In Design of Steel Structures. Springer US, 1995. http://dx.doi.org/10.1007/978-1-4615-2079-5_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Cracknell, P. S., and R. W. Dyson. "The three-plate mould." In Handbook of Thermoplastics Injection Mould Design. Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-015-7209-5_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Cracknell, P. S., and R. W. Dyson. "The two-plate mould." In Handbook of Thermoplastics Injection Mould Design. Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-015-7209-5_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Gupta, Abhishek, Akash Kaushik, and Vishwa Goswami. "Glame—Glass Holding Plate Accessory." In Design for Tomorrow—Volume 3. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0084-5_44.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bendsøe, Martin P. "Generalized Plate Models and Optimal Design." In Homogenization and Effective Moduli of Materials and Media. Springer New York, 1986. http://dx.doi.org/10.1007/978-1-4613-8646-9_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hoffman, Edward S., David P. Gustafson, and Albert J. Gouwens. "Two-Way Solid Flat Plate Design." In Structural Design Guide to the ACI Building Code. Springer US, 1998. http://dx.doi.org/10.1007/978-1-4757-6619-6_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Weinand, Yves. "Design optimization in timber plate structures." In Design of Integrally-Attached Timber Plate Structures. Routledge, 2021. http://dx.doi.org/10.1201/9781003139713-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Plate design"

1

Kim, Young-Il, and Cha-Soo Jun. "Hole-Making on a Bent Thick Plate." In ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2005. http://dx.doi.org/10.1115/detc2005-84274.

Full text
Abstract:
A method for cutting non-circular holes on a bent thick plate is proposed. Generally, in order to cut holes on large plates, a special-purpose 5-axis machine is needed. However, such a machine is unavailable in most machine shops. This paper provides a description of a method that utilizes a general-purpose 5-axis water-jet machine in place of the special-purpose machine: First, the bent piece is transformed into a flat plate, where the shape of the holes is reconstructed by considering deformation during bending. Then, after 5-axis NC data is generated, the holes on the flat plate are cut usi
APA, Harvard, Vancouver, ISO, and other styles
2

Navazi, H. M., H. Haddadpour, and M. Rasekh. "An Analytical Solution for Nonlinear Cylindrical Bending of Functionally Graded Plates." In ASME 8th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2006. http://dx.doi.org/10.1115/esda2006-95252.

Full text
Abstract:
In this paper, the nonlinear cylindrical bending of a functionally graded plate is studied. The material properties of the plate are assumed to be graded continuously in the direction of thickness. The variation of the material properties follows a simple power-law distribution in terms of the volume fractions of constituents. The von Karman strains are used to construct the nonlinear equilibrium equations of the plates subjected to in-plane and transverse loadings. The governing equations are reduced to linear differential equation with nonlinear boundary conditions yielding a simple solution
APA, Harvard, Vancouver, ISO, and other styles
3

Wiltse, James C. "Advanced zone plate antenna design." In International Symposium on Optical Science and Technology, edited by R. Jennifer Hwu and Ke Wu. SPIE, 2000. http://dx.doi.org/10.1117/12.422146.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Eaton, Jonathon, and Marcellin Zahui. "Design of Plate Surface Displacement Sensors." In ASME 2014 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/imece2014-37537.

Full text
Abstract:
The present work uses PolyVinyliDene Fluoride (PVDF) film to develop surface displacement sensors for vibrating plates with various boundary conditions. Two constant shape PVDF films are bonded together and to the surface of the plate covering the entire plate. The films are arranged such that the piezoelectric axis 1 of the top film is perpendicular to the piezoelectric axis 2 of the bottom axis. Right angle quadrilaterals patches are etched on the films to create multiple separate sections of the sensors. The output charges of sensor patches covering the same subarea are processed to compute
APA, Harvard, Vancouver, ISO, and other styles
5

Huang, Yu-Hsi, Ching-Kong Chao, and Wan-Ting Chou. "The Application of Electrode Design in Vibrating Piezoceramic Plate for Energy Harvesting System." In ASME 2013 Dynamic Systems and Control Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/dscc2013-3804.

Full text
Abstract:
The energy harvesting system of piezoceramic plate is studied on the electrode configuration to improve the electromechanical transferring efficiency. The piezoceramic plate is used to perform the vibration characteristics by experimental measurements and finite element method (FEM). Thereafter, the dynamic characteristics and the electromechanical coupling efficiency of the piezoelectric energy harvesting system are studied by the electrode design method of the piezoceramic plate. Several experimental techniques are used to measure the dynamic characteristics of piezoceramic plate. First, the
APA, Harvard, Vancouver, ISO, and other styles
6

Luo, Albert C. J., and Hamid R. Hamidzadeh. "The Nonlinear Vibration and Stability of Axially Traveling Thin Plates." In ASME 2003 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/detc2003/vib-48439.

Full text
Abstract:
Frequency and responses for the free vibration of traveling, nonlinear, elastic plates are obtained that are based on a nonlinear plate theory developed by Luo in 2000. The plate theory includes the in-plane inertial forces, the centrifugal forces, curvature effects and the in-plane Coriolis inertia. The critical speeds are obtained while the frequency of the prebuckled plate vanishes, and the critical speed for the mode (1,1) response is not always minimal.
APA, Harvard, Vancouver, ISO, and other styles
7

Özkaya, Ece, Selin Aradag, and Sadik Kakac. "CFD Aided Design of Heat Transfer Plates for Gasketed Plate Heat Exchangers." In ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/esda2014-20063.

Full text
Abstract:
In this study, three-dimensional computational fluid dynamics (CFD) analyses are performed to assess the thermal-hydraulic characteristics of a commercial Gasketed Plate Heat Exchangers (GPHEx) with 30 degrees of chevron angle (Plate1). The results of CFD analyses are compared with a computer program (ETU HEX) previously developed based on experimental results. Heat transfer plate is scanned using photogrammetric scan method to model GPHEx. CFD model is created as two separate flow zones, one for each of hot and cold domains with a virtual plate. Mass flow inlet and pressure outlet boundary co
APA, Harvard, Vancouver, ISO, and other styles
8

Soto, Ciro A., and Alejandro R. Diaz. "Layout of Plate Structures for Improved Dynamic Response Using a Homogenization Method." In ASME 1993 Design Technical Conferences. American Society of Mechanical Engineers, 1993. http://dx.doi.org/10.1115/detc1993-0358.

Full text
Abstract:
Abstract A model to compute average properties for Mindlin plates of rapidly varying thickness was introduced in [SOT93]. The model was designed to be of use in computations of the optimum shape and layout of plates using the technique introduced by Bendsøe and Kikuchi [BEN88]. In this paper we discuss the utilization of the model to determine the optimum layout of plate structures that maximizes a function of the structure’s natural frequencies. A simply supported square plate is used to illustrate the problem of optimization in the presence of repeated natural frequencies. An automotive appl
APA, Harvard, Vancouver, ISO, and other styles
9

Abrate, Serge. "Vibration of Functionally Graded Plates." In ASME 8th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2006. http://dx.doi.org/10.1115/esda2006-95778.

Full text
Abstract:
This article considers the free vibration of plates for which materials properties vary continuously though the thickness. First, an examination of results available in the literature led to the discovery that the natural frequencies of such functionally graded plates are proportional to those of isotropic plates. In the usual formulation of existing plate theories, the midplane is taken as the reference surface and the variation in material properties through the thickness leads to coupling between inplane and bending deformations. The second part of this paper shows that it is possible to se
APA, Harvard, Vancouver, ISO, and other styles
10

Chang, Chiang-Nan, and Thien-Rhei Chen. "A Finite Element Modeling of Higher Order Shear Deformation Theory on a Plate Vibration Problem." In ASME 1991 Design Technical Conferences. American Society of Mechanical Engineers, 1991. http://dx.doi.org/10.1115/detc1991-0347.

Full text
Abstract:
Abstract Higher order Shear Defamation Plate Theories (HSDPT) are improved theories over Mindlin plate theory because their assumptions are closer to reality. However, they are seldom used in solving ordinary engineering works. This is due to the fact that mathematical formulations and computations are so lengthy that time and efforts required are close to solving a exact 3-D model. For problems involving sharp stress variation, higher order theories are anticipated to give better results. The combination of HSDPT and Finite Element Modelings are especially attractive because a finite element
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Plate design"

1

K. Davies and J. H. Jackson. Zirconium Plate Measuring Instrument (ZPMI) Design Report. Office of Scientific and Technical Information (OSTI), 2013. http://dx.doi.org/10.2172/1134416.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Stepanek, G. Uranium Plate Test Stack: Test of CC Design. Office of Scientific and Technical Information (OSTI), 1985. http://dx.doi.org/10.2172/1030019.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

ADAMS, M. R. Design review report, 241-S-102 cover plate review. Office of Scientific and Technical Information (OSTI), 1998. http://dx.doi.org/10.2172/11260.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Hardt, David, Andrew Wright, and Edward Constantine. A Design Oriented Model of Plate Forming for Shipbbuilding. Defense Technical Information Center, 1989. http://dx.doi.org/10.21236/ada450627.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Handler, T., P. K. Job, and T. A. Gabriel. Design considerations for a scintillating plate calorimeter for SDC. Office of Scientific and Technical Information (OSTI), 1991. http://dx.doi.org/10.2172/5320891.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Shmalhausen, V. I. Continuous contour phase plate design. Final report, Project 2. Office of Scientific and Technical Information (OSTI), 1996. http://dx.doi.org/10.2172/237263.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Coryell, E. W., and F. P. Griffin. Preliminary design report for SCDAP/RELAP5 lower core plate model. Office of Scientific and Technical Information (OSTI), 1998. http://dx.doi.org/10.2172/663261.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

JAKA, O. M. Design Review Report for Concrete Cover Block Replaced by Steel Plate. Office of Scientific and Technical Information (OSTI), 2000. http://dx.doi.org/10.2172/804237.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Matsushima, T., D. Ikeda, and H. Kanagawa. Design and performance of tubular flat-plate solid oxide fuel cell. Office of Scientific and Technical Information (OSTI), 1996. http://dx.doi.org/10.2172/460184.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

JAKA, O. M. Design Review Report for Concrete Cover Block Replaced by Steel Plate. Office of Scientific and Technical Information (OSTI), 2001. http://dx.doi.org/10.2172/806011.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Plate design' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography