Log in

Relevant bibliographies by topics / Plate design / Journal articles

To see the other types of publications on this topic, follow the link: Plate design.

Journal articles on the topic 'Plate design'

Author: Grafiati

Published: 4 June 2021

Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Plate design.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Lovíšek, Ján. "Optimal design of laminated plate with obstacle." Applications of Mathematics 37, no. 5 (1992): 321–42. http://dx.doi.org/10.21136/am.1992.104514.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Hammad, Ahmed, Yehia Abdel-Nasser, Cristina Churiaque, and José María Sánchez-Amaya. "Rationally-Based Structural Design of Welded Plate Panels." Metals 11, no. 9 (2021): 1381. http://dx.doi.org/10.3390/met11091381.

Full text

Abstract:

This study predicts the behavior of welded plate panels (unstiffened plates) with different geometrical properties (slenderness ratio and aspect ratio) in order to address a rational structural design procedure, as these parameters are of great importance from a structural design perspective. Nonlinear finite element analysis has been used to simulate the butt-welding process of plate panels, giving the three-dimensional distribution of distortion and residual stresses induced by welding through the design of a moving heat source. The numerical results are validated with published experimental

APA, Harvard, Vancouver, ISO, and other styles

3

Vasilenko, N. V., A. E. Babenko, and A. Yu Chirkov. "Design of plate systems." Strength of Materials 17, no. 2 (1985): 244–50. http://dx.doi.org/10.1007/bf01532375.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Rhodes, J. "Microcomputer design analysis of plate post-buckling behaviour." Journal of Strain Analysis for Engineering Design 21, no. 2 (1986): 71–76. http://dx.doi.org/10.1243/03093247v212071.

Full text

Abstract:

Explicit formulae are presented for the examination of plate post-buckling behaviour. Plates with simply supported loaded ends and having simply supported, fixed, or some intermediate, elastic restraint on edge rotation are considered, and it is assumed that the unloaded edges are free to wave in their own plane. The coefficients used in the equations were derived on the basis of curve fitting to a large number of computer solutions and are applicable to any buckle half wavelength or rotational restraint condition normally found in engineering structures. These equations are sufficiently simpl

APA, Harvard, Vancouver, ISO, and other styles

5

Park, Si-Myung, Soyeon Park, Jieun Park, Minwook Choi, Laehyun Kim, and Gunwoo Noh. "Design process of patient-specific osteosynthesis plates using topology optimization." Journal of Computational Design and Engineering 8, no. 5 (2021): 1257–66. http://dx.doi.org/10.1093/jcde/qwab047.

Full text

Abstract:

Abstract To reduce complications related to the osteosynthesis plating system, the use of a patient-specific plate design was proposed. However, the issue of associated complications is still critical. Because existing patient-specific plate designs have mainly relied on parametric studies, a design method is needed that considers the complex factors influencing the performance of the reconstruction and that can be generalized for various patients. The goal of this study was to propose a design process that can strengthen the advantages of a customized plate to reduce patient discomfort and en

APA, Harvard, Vancouver, ISO, and other styles

6

Orton, Sarah L., David Barrett, Alaa El-Din Elsisi, Andrew Pelikan, and Hani Salim. "Finger-Plate and Flat-Plate Expansion Device Design Evaluation." Journal of Bridge Engineering 22, no. 12 (2017): 04017106. http://dx.doi.org/10.1061/(asce)be.1943-5592.0001156.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Ham, Juh-Hyeok. "Design System of Doubler Plate of Ship Plate Members under Various In-plane and Out-of-plane Loads." Journal of the Society of Naval Architects of Korea 55, no. 6 (2018): 521–26. http://dx.doi.org/10.3744/snak.2018.55.6.521.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Hu, Jong Wan, and Jun Hyuk Ahn. "New Bolted End-Plate Connection Design." Advanced Materials Research 1025-1026 (September 2014): 878–84. http://dx.doi.org/10.4028/www.scientific.net/amr.1025-1026.878.

Full text

Abstract:

This paper is principally performed to survey end-plate connection are described in the next part based on ideal limit states. The determination of end-plate based on the full plastic strength of the steel beam in accordance with 2001 AISC-LRFD manual and AISC/ANSI 358-05 Specifications. The bolted connections considered herein were performed to include the end-plate component of moment connections. This study is intended to investigate economic design for end-plate connections. In addition, the proposed end-plate model is evaluated by comparing the required factored bolt strength. The end-pla

APA, Harvard, Vancouver, ISO, and other styles

9

Wu, Ming Qing, and Yi Cui. "A Plate Stamping Mould Design." Advanced Materials Research 912-914 (April 2014): 1580–83. http://dx.doi.org/10.4028/www.scientific.net/amr.912-914.1580.

Full text

Abstract:

The design for a plate of cold stamping die design, Analysis of the technology of first part, determine the mould structure scheme, design choose zero, components, mainly to the punch, concave die, die and punch, design, drawing mould assembly drawing.

APA, Harvard, Vancouver, ISO, and other styles

10

Wang, Rui Feng, Xiao Jin Fu, and Wei Xu. "License Plate Recognition System Design." Applied Mechanics and Materials 738-739 (March 2015): 639–42. http://dx.doi.org/10.4028/www.scientific.net/amm.738-739.639.

Full text

Abstract:

The license plate recognition system is an important part of modern traffic management. application which is very extensive. In this paper, a method to achieve three main modules split from the image pre-processing, license plate location and character. Image pre-processing module of this article is to image gray and step by Roberts operator edge detection. License plate positioning and segmentation using mathematical morphology is used to determine the license plate location method, and then use the license plate color information of color segmentation method to complete the license plate par

APA, Harvard, Vancouver, ISO, and other styles

11

Spillers, W. R., and Robert Levy. "Optimal Design for Plate Buckling." Journal of Structural Engineering 116, no. 3 (1990): 850–58. http://dx.doi.org/10.1061/(asce)0733-9445(1990)116:3(850).

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

EVANS, HR, and S. MOUSSEF. "DESIGN AID FOR PLATE GIRDERS." Proceedings of the Institution of Civil Engineers 85, no. 1 (1988): 89–104. http://dx.doi.org/10.1680/iicep.1988.110.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Alshabatat, Nabeel. "Design of Corrugated Plates for Optimal Fundamental Frequency." Advances in Acoustics and Vibration 2016 (July 18, 2016): 1–9. http://dx.doi.org/10.1155/2016/4290247.

Full text

Abstract:

This paper investigates shifting the fundamental frequency of plate structures by corrugation. Creating corrugations significantly improves the flexural rigidities of plate and hence increases its natural frequencies. Two types of corrugations are investigated: sinusoidal and trapezoidal corrugations. The finite element method (FEM) is used to model the corrugated plates and extract the natural frequencies and mode shapes. The effects of corrugation geometrical parameters on simply supported plate fundamental frequency are studied. To reduce the computation time, the corrugated plates are mode

APA, Harvard, Vancouver, ISO, and other styles

14

Al-Tamimi, Abdulsalam Abdulaziz, Carlos Quental, Joao Folgado, Chris Peach, and Paulo Bartolo. "Stress analysis in a bone fracture fixed with topology-optimised plates." Biomechanics and Modeling in Mechanobiology 19, no. 2 (2019): 693–99. http://dx.doi.org/10.1007/s10237-019-01240-3.

Full text

Abstract:

Abstract The design of commercially available fixation plates and the materials used for their fabrication lead to the plates being stiffer than bone. Consequently, commercial plates are prone to induce bone stress shielding. In this study, three-dimensional fixation plates are designed using topology optimisation aiming to reduce the risk of bone stress shielding. Fixation plate designs were optimised by minimising the strain energy for three levels of volume reduction (i.e. 25%, 45% and 75%). To evaluate stress shielding, changes in bone stress due to the different fixation plate designs wer

APA, Harvard, Vancouver, ISO, and other styles

15

Wang, Zai Cheng, Wei Ling Yang, and Chun Lan Jiang. "A Design and Numerical Study of Flying-Plate Initiating System." Advanced Materials Research 461 (February 2012): 398–401. http://dx.doi.org/10.4028/www.scientific.net/amr.461.398.

Full text

Abstract:

In order to form plane shock wave in explosive charge after detonation ,a flying-plate initiating system was put forward. The principle of material selection, the shape and incline angle of flying-plate were defined by theoretical analysis and calculations. The velocity of flying-plate, distance of between flying-plate and driving charge was analyzed and calculated according one-dimensional driving theory. The working process of flying-plate initiating system was studied by numerical simulation and the simulation results show flying-plate initiating system is reliable way to initiate main char

APA, Harvard, Vancouver, ISO, and other styles

16

Tsai, Chuen-Jinn, and Hsin-Chung Lu. "Design and Evaluation of a Plate-to-Plate Thermophoretic Precipitator." Aerosol Science and Technology 22, no. 2 (1995): 172–80. http://dx.doi.org/10.1080/02786829408959738.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Fernandez, Rajan. "Multi-Axis Load Cell Designs Employing Multiple Shear Beams." Applied Mechanics and Materials 226-228 (November 2012): 1981–86. http://dx.doi.org/10.4028/www.scientific.net/amm.226-228.1981.

Full text

Abstract:

Binocular and parallel plate structure load cells are very successful designs for strain based measurements of shear loads. In this paper we use finite element methods (FEM) to investigate the suitability of these two load cell designs for use in a force plate and compare the sensitivity of these two force plates to that of the Heglund’s force plate. Each force plate is also sensitive to two moments with axis in the same plane as the force plate. If the force plate is to be used as a two component force-moment sensor, we determine which moment axis is best to use. Finally, a novel six-axis loa

APA, Harvard, Vancouver, ISO, and other styles

18

Shi, Lei Ming, Shun Li Feng, Zhi Hong Wang, Yi Ming Shao, and Xiao Chun Jian. "The Optimization Design and Research of CX20 Clutch Friction Plate." Advanced Materials Research 900 (February 2014): 781–86. http://dx.doi.org/10.4028/www.scientific.net/amr.900.781.

Full text

Abstract:

With the help of the orthogonal experiment and the friction-wear mechanism by car as the research object of the clutch driven platen friction plate of Chongqing Changan CX20 auto power take-off installation, the optimization of clutch friction materials is studied.It was selected for the resin-base fiber materials of clutch driven platen to be commonly used in auto mechanical manufacture. It was analyzed for the abrasion mechanism of the clutch driven platen friction plate between the flywheel and the pressure plate,and discussed for the relationship of driven platen friction-plate heat recess

APA, Harvard, Vancouver, ISO, and other styles

19

Shepherd, D. E. T., C. M. Bolger, J. C. Leahy, K. J. Mathias, and D. W. L. Hukins. "Design of an occipito-cervical fixation device." Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 214, no. 4 (2000): 401–11. http://dx.doi.org/10.1243/0954411001535435.

Full text

Abstract:

Metal plates may be used to stabilize the cervical spine. The plates are attached to the posterior of the vertebra by placing screws into the lateral masses. The plating may be extended, in the form of rod or plate, to connect with and support the occiput. Several problems, such as screw loosening and the plate obscuring the surgeon's view as a screw is being inserted, have been identified with present plate systems. This paper describes the initial design for a cervical fixation device to overcome these problems, and the design and development that was undertaken to enable a prototype device

APA, Harvard, Vancouver, ISO, and other styles

20

Holmes, Samuel, Shankar Bhat, Pierre Beynet, Anil Sablok, and Igor Prislin. "Heave Plate Design With Computational Fluid Dynamics." Journal of Offshore Mechanics and Arctic Engineering 123, no. 1 (2000): 22–28. http://dx.doi.org/10.1115/1.1337096.

Full text

Abstract:

Computational fluid dynamics (CFD) methods are used to predict the hydrodynamic loads on heave plates. A series of numerical simulations for plates undergoing simple harmonic motion is used to determine the force and moment resultant histories. Then a least mean squares method is used to obtain the appropriate Morison coefficients for the plates under a variety of sea conditions. Finally, force and moment histories are predicted for a plate on a floating platform excited by a random sea motion.

APA, Harvard, Vancouver, ISO, and other styles

21

Ilyas, Asif M., Gerald M. Hayward, Jonathan A. Harris, Wenhai Wang, and Brandon S. Bucklen. "Bridge Plate Design Effects on Yield and Fatigue in Distal Radius Fracture Model." Journal of Wrist Surgery 9, no. 06 (2020): 475–80. http://dx.doi.org/10.1055/s-0040-1713419.

Full text

Abstract:

Abstract Background Bridge plating for distal radius fractures is indicated for complex fractures with comminution, extensive articular involvement, and/or cases requiring immediate weight bearing. Bridge plate fixation of distal radius fractures is a well-documented treatment method; however, failures have been reported with repetitive loading through the bridged distal radius fracture. Plate design is implicated as a cause of plate fracture in select clinical studies but few mechanical tests comparing bridge plate designs have been reported. This study sought to determine the impact of plate

APA, Harvard, Vancouver, ISO, and other styles

22

Yang Zejian, 阳泽健, 高福华 Gao Fuhua, 姚欣 Yao Xin, and 郭永康 Guo Yongkang. "Optimized Design of Continuous Phase Plate." Laser & Optoelectronics Progress 47, no. 2 (2010): 022301. http://dx.doi.org/10.3788/lop47.022301.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Tvrda, Katarina. "Probability Aspects in Foundation Plate Design." Applied Mechanics and Materials 837 (June 2016): 64–67. http://dx.doi.org/10.4028/www.scientific.net/amm.837.64.

Full text

Abstract:

The probabilistic design analyses a plate involving uncertain input parameters. These input parameters (geometry, material properties, boundary conditions, etc.) are defined in the software model. The variations of input parameters are defined as random input variables and are characterized by their distribution type (Gaussian, lognormal, etc.) and by their distribution parameters (mean values, standard deviation, etc.). During a probabilistic analysis, software executes multiple analysis loops to compute the random output parameters as a function of the set of random input variables. The valu

APA, Harvard, Vancouver, ISO, and other styles

24

Chen, Kai Jun. "Design of the Plate Heat Exchanger." Advanced Materials Research 912-914 (April 2014): 624–27. http://dx.doi.org/10.4028/www.scientific.net/amr.912-914.624.

Full text

Abstract:

The plate heat exchanger is an ideal heat exchange equipment for liquid - liquid, liquid--gas, it has the characteristics of high heat exchange efficiency, low heat loss, compact structure, small occupation area, convenient installation and cleaning, wide application, long service life etc.. So the design of plate heat exchanger in the relevant state industrial construction is a very important link,

APA, Harvard, Vancouver, ISO, and other styles

25

Paik, Jeom K., Juh H. Ham, and Eul N. Kim. "A New Plate Buckling Design Formula." Journal of the Society of Naval Architects of Japan 1992, no. 171 (1992): 267–74. http://dx.doi.org/10.2534/jjasnaoe1968.1992.267.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Jawad,, MH, and SN Krivoshapko,. "Design of Plate and Shell Structures." Applied Mechanics Reviews 57, no. 5 (2004): B27. http://dx.doi.org/10.1115/1.1818694.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Duerr, David. "Design of Stiffened Plate Lifting Beams." Practice Periodical on Structural Design and Construction 13, no. 2 (2008): 59–66. http://dx.doi.org/10.1061/(asce)1084-0680(2008)13:2(59).

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Law, C. W., and Y. M. Cheng. "Improved Thick Plate Analysis and Design." HKIE Transactions 13, no. 2 (2006): 49–58. http://dx.doi.org/10.1080/1023697x.2006.10668040.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Jaspers, B. C. "Hollow Electrode Loose Plate SOFC Design." ECS Proceedings Volumes 1995-1, no. 1 (1995): 274–81. http://dx.doi.org/10.1149/199501.0274pv.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Mota, Fábio A. S., Mauro A. S. S. Ravagnani, and E. P. Carvalho. "Optimal design of plate heat exchangers." Applied Thermal Engineering 63, no. 1 (2014): 33–39. http://dx.doi.org/10.1016/j.applthermaleng.2013.09.046.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Dmitrienko, �. I., V. M. Dolinskii, L. P. Pertsev, et al. "Optimum design of plate heat exchangers." Chemical and Petroleum Engineering 21, no. 7 (1985): 314–16. http://dx.doi.org/10.1007/bf01149655.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Hinchcliff, Katharine M., Ido Volk, Xenia Ivanova, Sandra Taylor, and Robert M. Szabo. "Impact of Design on Force between Flexor Tendons and Distal Radius Volar Plates." Journal of Wrist Surgery 08, no. 04 (2019): 280–87. http://dx.doi.org/10.1055/s-0039-1683845.

Full text

Abstract:

Background Flexor tendon injury is a rare but serious complication of distal radius volar plating. Purpose This study aims to determine whether the design of distal radius volar plates impacts the amount of force exerted on the flexor digitorum profundus (FDP) and flexor pollicis longus (FPL) tendons when the plates are placed proximal and distal to the watershed line. Methods Three commercially available plates were applied to 10 fresh, matched-pair upper extremity specimens. Cyclical loading was applied to the tendons, and the force generated between tendon and plate was measured. Linear mix

APA, Harvard, Vancouver, ISO, and other styles

33

Liu, Linya, Xuan Wang, Yun-Lai Zhou, and Jialiang Qin. "Vibration Mitigation Effect Investigation of a New Slab Track Plate Design." Sensors 19, no. 1 (2019): 168. http://dx.doi.org/10.3390/s19010168.

Full text

Abstract:

This study proposed a novel vibration mitigation slab track plate design to mitigate the vibration induced in urban rail transit operations. The optimal recipe for the newly designed slab track plate is obtained by a series of laboratory tests, and both newly designed vibration mitigation slab track plates and normal slab track plates are fabricated and hereinafter tested. The newly designed slab track plate was examined with a series of laboratory tests in comparison with the normal slab track plate. The PolyMAX method is then adopted for extracting the modal properties, including resonant fr

APA, Harvard, Vancouver, ISO, and other styles

34

Nakaiwa, Masaru, Masaru Owa, Takaji Akiya, et al. "Design procedure for a plate-to-plate heat-integrated distillation column." KAGAKU KOGAKU RONBUNSHU 12, no. 5 (1986): 535–41. http://dx.doi.org/10.1252/kakoronbunshu.12.535.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Bock, Igor. "Optimal design problems for a dynamic viscoelastic plate. I. Short memory material." Applications of Mathematics 40, no. 4 (1995): 285–304. http://dx.doi.org/10.21136/am.1995.134295.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

ZHOU, Chengxu, Xinglong LIU, Minoru MORITA, and Zhongwei JIANG. "711 Design of Sensor Network Unit for Damage Localization in Plate Structures." Proceedings of Conference of Chugoku-Shikoku Branch 2010.48 (2010): 213–14. http://dx.doi.org/10.1299/jsmecs.2010.48.213.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Zwalnan, Selfa Johnson, Gideon Ayuba Duvuna, Yousif Abdalla Abakr, and Tiyamike Banda. "Design and Performance Evaluation of a Multi-Temperature Flat Plate Solar Collector." International Journal of Renewable Energy Development 10, no. 3 (2021): 537–39. http://dx.doi.org/10.14710/ijred.2021.33213.

Full text

Abstract:

The standard flat-plate solar collector utilises a single copper tube to remove the absorber plate’s heat. This type of collector’s primary purpose is to provide hot water for a single application. Hot water can be required for different applications at different temperatures. Besides, using the standard collector’s configuration may increase thermal demand and increase the collector’s size. Therefore, this study proposes a novel solar water heating configuration that uses three in-line fluid passages. The goal is to design a single collector that provides hot water for various uses: Sterilisa

APA, Harvard, Vancouver, ISO, and other styles

38

Ham, Juh-Hyeok. "Development of Ship Plate Member Design System Reinforced by Doubler Plate Subjected to Biaxial In-plane Compressive Load." Journal of Ocean Engineering and Technology 30, no. 4 (2016): 294–302. http://dx.doi.org/10.5574/ksoe.2016.30.4.294.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Paliwal, D. N., and S. K. Moulick. "Further Investigations in Tubesheet Design for a U-Tube Heat Exchanger." Journal of Pressure Vessel Technology 118, no. 2 (1996): 142–45. http://dx.doi.org/10.1115/1.2842172.

Full text

Abstract:

A tubesheet for U-tubesheet heat exchanger is analyzed as an equivalent solid circular plate having complete isotropy in the plane of the tubesheet with usual effective elastic constants. However, the tubesheet is expected to have different values of modulus of elasticity, modulus of rigidity, and Poisson’s ratio in the thickness direction. This anisotropic behavior of the tubesheet in thickness direction is taken into account by using the anisotropic theory of plates. When performing theoretical analysis, normal stress in thickness direction is also not assumed equal to zero. Hence, the resul

APA, Harvard, Vancouver, ISO, and other styles

40

Sulamet-Ariobimo, Rianti Dewi, Johny Wahyuadi Soedarsono, and Bambang Suharno. "Effect of Casting Design to Microstructure and Mechanical Properties of 4 Mm Twdi Plate." Advanced Materials Research 702 (May 2013): 269–74. http://dx.doi.org/10.4028/www.scientific.net/amr.702.269.

Full text

Abstract:

Casting design is chosen by Soedarsono et al to maintain cooling rate in producing thin wall ductile iron (TWDI). Cooling rate should be maintained to prevent carbide formation. This paper discusses the effect of gating system design on microstructure and mechanical properties of 4 mm TWDI plate. A casting design based on vertical gating system is made to produce TWDI plates with the thickness of 1, 2, 3, 4, and 5 mm. This vertical system allows plates to function as runner which will helps in preventing premature solidification. Three designs were made. These designs are coded as T1, T2, and

APA, Harvard, Vancouver, ISO, and other styles

41

Chen, Xiaozhong. "Parametric design of patient-specific fixation plates for distal femur fractures." Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 232, no. 9 (2018): 901–11. http://dx.doi.org/10.1177/0954411918793668.

Full text

Abstract:

To facilitate the creation, modification, and optimization of patient-specific plates for distal femur fractures, a novel approach was proposed for the rapid and convenient design of patient-specific plates for patients’ fractured femurs using feature parameterization. First, several femur parameter values were obtained for a specific patient and used to construct a restored surface model of the fractured femur. Next, combined with the particular femur anatomy and the fracture, a parameterized plate with a suitable shape was created automatically based on the parameter maps between the femur a

APA, Harvard, Vancouver, ISO, and other styles

42

Chen, Wen-Chin, Pen-Hsi Liou, and Bo-Jui Chen. "An Optimization System Applied in Optical Design of LED Light Guide Plate." Open Mechanical Engineering Journal 7, no. 1 (2013): 108–15. http://dx.doi.org/10.2174/1874155x01307010108.

Full text

Abstract:

Most of the small and medium-sized backlight modules are applied to a small amount of various products. Since the time to design a product is rigid and the light guide plate (LGP) is the key component that affects the quality of backlight modules, photovoltaic industries can enhance the core competence if they are able to develop high standard light guide plates with fast and efficient methods. The study proposes an optical optimal design system of light guide plate (LGP). The optimization design is conducted in the longitudinal structure of the LGP incidence plane with three LED light sources

APA, Harvard, Vancouver, ISO, and other styles

43

Kin, Y., and R. Dubrovsky. "New Power Transmission Chain Design." Journal of Vibration and Acoustics 108, no. 3 (1986): 255–61. http://dx.doi.org/10.1115/1.3269336.

Full text

Abstract:

Precision multiple roller power transmissions are investigated in this work. These chains transfer significant power and move with very high velocity. They are subjected to variable loading with strong vibration and impact components, and require forced stream lubrication. Because of these severe working conditions, chain life is limited by the fatigue, and the chain plates are the weakest elements in many cases. It is shown that fatigue life is significantly decreased by fretting action, high stress concentration in the plates, and the impossibility of maintaining a uniform force distribution

APA, Harvard, Vancouver, ISO, and other styles

44

Safaei, Mohsen, Sylvain Dupre, Elias Hoummadi, and Steven R. Anton. "Design, analysis, and fabrication of a piezoelectric force tray for total knee replacements." Journal of Intelligent Material Systems and Structures 30, no. 20 (2019): 3163–76. http://dx.doi.org/10.1177/1045389x19880003.

Full text

Abstract:

Force plates have been widely adopted in biomechanical gait analysis to measure reaction forces and the center of pressure. In this work, the force plate concept is miniaturized and extended for use within the polyethylene bearing insert of a total knee replacement. A simplified rectangular-shaped force plate with multiple integrated piezoelectric sensors, including designs with six and eight transducers, is presented in this work. The performance of the sensory system is investigated through finite element analysis and experimental validation. Initially, the ability of the two designs in sens

APA, Harvard, Vancouver, ISO, and other styles

45

Jaison, Jerry, Vasudevan Nagaraj, and Arockia Selvakumar A. "A Novel Gripper design for Diaphragm spring plate Pick and Place Cobot." International Journal of Engineering & Technology 7, no. 4.36 (2018): 394. http://dx.doi.org/10.14419/ijet.v7i4.36.23812.

Full text

Abstract:

Robot integrated manufacturing has turned out to be the future of manufacturing automation technology. Worker assisting robots perform simultaneously operation including machining, assembly, inspection, material handling etc. and in some case multiple operations in the same system at a faster and precise rate. Collaborative robots are human and computer controlled hybrid material handling device which facilitates the concept of shared workspace. To exploit its function, gripper mechanisms are inevitable. This project focuses on the design of cobotic grippers for pick and place application. Of

APA, Harvard, Vancouver, ISO, and other styles

46

Seo, Jungil, Amit H. Varma, Kadir Sener, and Deniz Ayhan. "Steel-plate composite (SC) walls: In-plane shear behavior, database, and design." Journal of Constructional Steel Research 119 (March 2016): 202–15. http://dx.doi.org/10.1016/j.jcsr.2015.12.013.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Attaalla, Sayed A. "Inelastic Buckling Strength of Unsymmetrical Tapered Plates." Advances in Structural Engineering 5, no. 3 (2002): 165–71. http://dx.doi.org/10.1260/136943302760228112.

Full text

Abstract:

A comprehensive nonlinear investigation is conducted on tapered plates having unsymmetrical geometry and subjected to five different in-plane compressive loads with the objective of reaching at simple design guidelines. The analyses considered both material and geometrical nonlinear behavior as well as post buckling of thin plates. Simply supported and clamped boundary conditions are considered herein to represent the upper and the lower bounds of most practical situations of tapered web plates in steel girders. The study covers plates with different tapering ratios as compared with the rectan

APA, Harvard, Vancouver, ISO, and other styles

48

Kannan, Mr, Saravanan P, and Srinivasaperumal K P. "Design And Experimental Investigation Of Single Plate Clutch." International Journal of Mechanical Engineering 7, no. 3 (2020): 30–34. http://dx.doi.org/10.14445/23488360/ijme-v7i3p104.

Full text

Abstract:

The Clutch Disk or plate is a part of the manual transmission system for your vehicle that delivers power from the engine to the transmission. It is mounted b/w the pressure plate & the flywheel. For high performance automobiles it is constructed from highly durable steel or sometimes other material. Performance of Vehicle Clutch plates on pad-to-disk interface touch conditions. The purpose of this study is to evaluate the impact on the friction & wear of Clutch Plate material from different material composition. If we use the composite material the cost instead of the traditional mate

APA, Harvard, Vancouver, ISO, and other styles

49

Sensharma, Pradeep K., Malcolm Willis, Aaron Dinovitzer, and Nat Nappi. "Design Guidelines for Doubler Plate Repairs of Ship Structures." Journal of Ship Production 22, no. 04 (2006): 219–38. http://dx.doi.org/10.5957/jsp.2006.22.4.219.

Full text

Abstract:

The use of doubler plates or "doublers" has become routine for temporary ship repairs. It is the preferred method for ship structural repairs for plate corrosion due to its relative ease and low cost of installation over the more costly permanent welded plate insert repair. A lack of performance data and engineering design guidance are the reasons that repairs with doublers are currently considered only temporary. The objective of this study was to develop a set of guidelines for designing and applying doubler plate repairs to ship structures. The guidelines were established using the followin

APA, Harvard, Vancouver, ISO, and other styles

50

Park, Yi-Keun, Ju-Youn Park, and Seong-Mo Park. "Design of Ball and Plate Robot controller using Single Camera." Journal of Korea Multimedia Society 16, no. 2 (2013): 213–25. http://dx.doi.org/10.9717/kmms.2013.16.2.213.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!