To see the other types of publications on this topic, follow the link: Plate temperature field.

Journal articles on the topic 'Plate temperature field'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Plate temperature field.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Song, Jiangnan, Ying Huang, Yi Liu, et al. "Numerical Investigation and Optimization of Cooling Flow Field Design for Proton Exchange Membrane Fuel Cell." Energies 15, no. 7 (2022): 2609. http://dx.doi.org/10.3390/en15072609.

Full text
Abstract:
High temperatures and non-uniform temperatures both have a negative bearing on the performance of proton exchange membrane fuel cells. The temperature of proton exchange membrane fuel cells can be lowered by reasonably distributed cooling channels. The flow field distribution of five different cooling plates is designed, and the temperature uniformity, pressure drop and velocity of each cooling flow field are analyzed by computational fluid dynamics technology. The results show that while the pressure drop is high, the flow channel distribution of a multi-spiral flow field and honeycomb struct
APA, Harvard, Vancouver, ISO, and other styles
2

Erdas, Andrea. "Magnetic field corrections to the repulsive Casimir effect at finite temperature." International Journal of Modern Physics A 31, no. 07 (2016): 1650018. http://dx.doi.org/10.1142/s0217751x16500184.

Full text
Abstract:
I investigate the finite temperature Casimir effect for a charged and massless scalar field satisfying mixed (Dirichlet–Neumann) boundary conditions on a pair of plane parallel plates of infinite size. The effect of a uniform magnetic field, perpendicular to the plates, on the Helmholtz free energy and Casimir pressure is studied. The [Formula: see text]-function regularization technique is used to obtain finite results. Simple analytic expressions are obtained for the zeta function and the free energy, in the limits of small plate distance, high temperature and strong magnetic field. The Casi
APA, Harvard, Vancouver, ISO, and other styles
3

Milošević-Mitić, Vesna, Ana Petrović, Nina Anđelić, and Miloš Jovanović. "The influence of temperature gradient on thin plates bending." FME Transactions 52, no. 1 (2024): 128–35. http://dx.doi.org/10.5937/fme2401128m.

Full text
Abstract:
Within the theory of thermo-elasticity, the temperature field of thin plates is commonly defined via two parameters: temperature in the mid-plane and linear temperature gradient normal to the mid-plane. First, the paper analytically proves the justification of that assumption in machine structures. Then, in an analytical closed form, applying the integral transformation method, the thin plate deflection caused by a constant temperature gradient is defined. It is shown that, in that case, the plate deflection does not depend on its thickness but only on the plate dimensions in the mid-plane. An
APA, Harvard, Vancouver, ISO, and other styles
4

Abiduev, P. L., T. G. Darmaev, and A. S. Buldaev. "Periodic temperature field in a composite plate." IOP Conference Series: Materials Science and Engineering 704 (December 13, 2019): 012010. http://dx.doi.org/10.1088/1757-899x/704/1/012010.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Erdas, Andrea, and Kevin P. Seltzer. "Finite temperature Casimir effect for massive scalars in a magnetic field." International Journal of Modern Physics A 29, no. 17 (2014): 1450091. http://dx.doi.org/10.1142/s0217751x14500912.

Full text
Abstract:
The finite temperature Casimir effect for a charged, massive scalar field confined between very large, perfectly conducting parallel plates is studied using the zeta function regularization technique. The scalar field satisfies Dirichlet boundary conditions at the plates and a magnetic field perpendicular to the plates is present. Four equivalent expressions for the zeta function are obtained, which are exact to all orders in the magnetic field strength, temperature, scalar field mass and plate distance. The zeta function is used to calculate the Helmholtz free energy of the scalar field and t
APA, Harvard, Vancouver, ISO, and other styles
6

Zhang, Xue-biao, Yu-long Yang, and Yu-jun Liu. "The Numerical Analysis of Temperature Field During Moveable Induction Heating of Steel Plate." Journal of Ship Production and Design 28, no. 02 (2012): 73–81. http://dx.doi.org/10.5957/jspd.2012.28.2.73.

Full text
Abstract:
In shipyards, hull curved plate formation is an important stage with respect to productivity and accuracy control of curved plates. Because the power and its distribution of induction heat source are easier to control and reproduce, induction heating is expected to be applied in the line heating process. This paper studies the moveable induction heating process of steel plate and develops a numerical model of electromagneticthermal coupling analysis and the numerical results consistent with the experimental results. The numerical model is used to analyze the temperature changing rules and the
APA, Harvard, Vancouver, ISO, and other styles
7

Zheng, Guochao, Fuli Wang, Baiping Yan, and Runting Cheng. "Temperature suppression of metal panel in electromagnetic field." Circuit World 46, no. 4 (2020): 317–24. http://dx.doi.org/10.1108/cw-07-2019-0069.

Full text
Abstract:
Purpose The purpose of this study is to suppress the temperature rise of high voltage wall bushing metal plate. Design/methodology/approach First, the authors built a model of a traditional metal plate and got the magnetic field intensity distribution by FEA tools. Optimized according to the magnetic field intensity distribution, the authors slot the traditional metal plate and embed permanent magnets in the slot. Finally, the authors got the temperature distribution diagrams of the above three cases at different current levels by FEA tools. Findings Slotted metal plate is beneficial to suppre
APA, Harvard, Vancouver, ISO, and other styles
8

Čajka, Radim. "Numerical Solution of Temperature Field for Stress Analysis of Plate Structures." Applied Mechanics and Materials 470 (December 2013): 177–87. http://dx.doi.org/10.4028/www.scientific.net/amm.470.177.

Full text
Abstract:
In the paper is described the solution of unsteady temperature field of multilayer plane structures. Nonlinear material and thermal properties of each layer for high temperature and fire is used. Defining the boundary conditions and calculation of the temperature at the contact material layers of the conditions of equality thermal flux is performed. The compiled program NONSTAC programmed numerical solution of differential equations modified heat conduction Euler and Runge - Kutta method with a variable integration step length. This computer program solves one dimensional temperature distribut
APA, Harvard, Vancouver, ISO, and other styles
9

Pawlus, Dorota. "Dynamic Response of Three-Layered Annular Plates in Time-Dependent Temperature Field." International Journal of Structural Stability and Dynamics 20, no. 12 (2020): 2050139. http://dx.doi.org/10.1142/s0219455420501394.

Full text
Abstract:
The paper presents a solution to the dynamic response of three-layered, annular plates that are thermo-mechanically loaded. Time-dependent forces are considered to act on the facings of the plate. The thermal loading is defined by a flat, axisymmetric temperature field whose profile is expressed by the stationary or increase in time temperature differences between the plate edges. The cases of the plates loaded only thermally or mechanically have been examined. The problem has been solved analytically and numerically using the approximation methods: orthogonalization and finite difference. The
APA, Harvard, Vancouver, ISO, and other styles
10

Kolahchi, R., M. Esmailpour, and M. Safari. "Magneto-Thermo-Mechanical Buckling Analysis of Mindlin Plate Reinforced with FG-Carbon Nanotubes." Archives of Civil Engineering 62, no. 3 (2016): 89–104. http://dx.doi.org/10.1515/ace-2015-0085.

Full text
Abstract:
Abstract A buckling analysis of temperature-dependent embedded plates reinforced by single-walled carbon nanotubes (SWCNTs) subjected to a magnetic field is investigated. The SWCNTs are distributed as uniform (UD) and three types of functionally graded nanotubes (FG), in which the material properties of the nano-composite plate are estimated based on the mixture rule. The surrounding temperature-dependent elastic medium is simulated as Pasternak foundation. Based on the orthotropic Mindlin plate theory, the governing equations are derived using Hamilton's principle. The buckling load of the st
APA, Harvard, Vancouver, ISO, and other styles
11

Cheng, Tao, and Ke Qin Yan. "Numerical Simulation for the Thermal Stress of Composite Wall Insulation System." Advanced Materials Research 168-170 (December 2010): 875–79. http://dx.doi.org/10.4028/www.scientific.net/amr.168-170.875.

Full text
Abstract:
This paper presents the thermal stress characteristics of polystyrene plate - thin plaster wall. Based on thermal stress analysis module of ANSYS software, a three-dimensional element solid5 is selected to mesh the wall model, which can simulate the coupling effects of thermal stress and structural stress field. The critical temperature of hot and cold cycles is taken as the critical temperature condition, which is imposed on the calculation model. Windowless Wall and window wall were modeled separately. Temperature field, thermal stress, and deformation distribution were proposed after compar
APA, Harvard, Vancouver, ISO, and other styles
12

XIA, XIAN-KUN, and HUI-SHEN SHEN. "COMPARISON OF VIBRATION CHARACTERISTICS FOR POSTBUCKLED FGM PLATES WITH PIEZOELECTRIC FIBER REINFORCED COMPOSITE ACTUATORS." International Journal of Structural Stability and Dynamics 09, no. 03 (2009): 533–59. http://dx.doi.org/10.1142/s021945540900317x.

Full text
Abstract:
Vibration analysis is carried out for compressively loaded and thermally loaded postbuckled functionally graded material (FGM) plates with piezoelectric fiber reinforced composite (PFRC) actuators. The temperature field is assumed to be uniformly distributed over the plate surface but it varies through the thickness. The electric field has a non-zero-valued component EZ. Material properties of the substrate FGM layer are assumed to be graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents. The material properties of b
APA, Harvard, Vancouver, ISO, and other styles
13

Xu, Yang Jian, Ling Ling Wang, and Hai Yang Du. "Analysis of Heating Steady Temperature Field in an Al1100/Ti-6Al-4V/SiC 2D-FGM Plane Plate by FEM." Key Engineering Materials 450 (November 2010): 235–38. http://dx.doi.org/10.4028/www.scientific.net/kem.450.235.

Full text
Abstract:
The steady heat conduction problems under linear temperature load on upper surface in an Al1100/Ti-6Al-4V/SiC 2D-FGM plane plate are analyzed by the FEM. When the variation of the material composition in y-direction is linear, the plane temperature distributions with the changes of composition shape distribution coefficient mx and porosity coefficient Ax in x-direction are obtained. The results show that when mx<0.1, the temperature curve surface is upward convex. The smaller mx is, the bigger relative temperature gradient on the left side of the plate is. When mx>1.0, the temperature cu
APA, Harvard, Vancouver, ISO, and other styles
14

George, Nivish, P. Jeyaraj, and S. M. Murigendrappa. "Buckling and Free Vibration of Nonuniformly Heated Functionally Graded Carbon Nanotube Reinforced Polymer Composite Plate." International Journal of Structural Stability and Dynamics 17, no. 06 (2017): 1750064. http://dx.doi.org/10.1142/s021945541750064x.

Full text
Abstract:
Buckling and free vibration behavior of functionally graded carbon nanotube reinforced polymer composite plate subjected to nonuniform temperature fields have been investigated using finite element approach. The effective material constants of the plate are obtained using the extended rule of mixture along with efficiency parameters of the carbon nanotube (to include geometry-dependent material properties). Influence of boundary conditions, aspect ratio, functional grading of the carbon nanotube, nonuniform thermal loading on thermal buckling and free vibration behavior of the heated plate are
APA, Harvard, Vancouver, ISO, and other styles
15

Vijayalakshmi, E. Arul, Kannana M., and Visuvasam J. "Analysis of Transient MHD Flow Past a Vertical Plate with Periodic Temperature." NeuroQuantology 20, no. 5 (2022): 802–7. http://dx.doi.org/10.14704/nq.2022.20.5.nq22237.

Full text
Abstract:
A mathematical model is used to simulate the effect of the magnetic field on the temporary free convection flow of electrically conductive fluid past a vertical plate under periodic temperatures. Analyzing momentum and energy equations using homotopy perturbations. The analysis of the temperature profile with a constant temperature plate is presented using Homotopy perturbation method and Laplace transform. There is an analysis of the significance of different physical parameters, such as Grashof number, magnetic parameter, Prandtl number, and temperature frequency, on transient velocity and t
APA, Harvard, Vancouver, ISO, and other styles
16

Gerasyutenko, Victoria V., Alexander V. Sharkov, Vladimir A. Korablev, and Dmitry A. Minkin. "Improvement of methods and means of thermal imagers verification and calibration." Izmeritel`naya Tekhnika, no. 6 (2020): 33–39. http://dx.doi.org/10.32446/0368-1025it.2020-6-33-39.

Full text
Abstract:
This paper suggests the verification and calibration method of thermal imagers that consists in comparison of temperature readings obtained by contact and thermal imaging method. The experimental setup has been developed to confirm the reliability of the proposed method. The main element of experimental setup is an emitting surface in the form of rectangular plate that measures 330×200×4 mm. The plate is covered with paint which emissivity factor is not less than 0,96. The paper presents the results of temperature field calculations on the plate emitting surface. The temperature field of the p
APA, Harvard, Vancouver, ISO, and other styles
17

Grigoryan, Edmon R. "ON ONE PROBLEM OF OPTIMAL CONTROL OF VIBRATIONS OF A PLATE-STRIP IN A TEMPERATURE FIELD." Proceedings of the YSU A: Physical and Mathematical Sciences 57, no. 3 (262) (2023): 79–85. http://dx.doi.org/10.46991/pysu:a/2023.57.3.079.

Full text
Abstract:
The problem of optimal control of elastic vibrations of an isotropic plate-strip under the influence of temperature and force fields is studied. The function of changing the external load on the plane of the plate is represented as a control function. Optimal control is also carried out by the distribution function of the temperature of the external field over the plate. The well-known classical hypotheses of thermo-elastic bending of the plate are accepted. The equations of transverse vibrations of the plate and heat conduction in the plate are solved under the boundary conditions of heat tra
APA, Harvard, Vancouver, ISO, and other styles
18

Muthucumaraswamy, R., and V. Visalakshi. "MHD and Thermal Radiation Effects on Exponentially Accelerated Isothermal Vertical Plate with Uniform Mass Diffusion." International Journal of Applied Mechanics and Engineering 18, no. 2 (2013): 599–608. http://dx.doi.org/10.2478/ijame-2013-0037.

Full text
Abstract:
Thermal radiation effects on an unsteady free convective flow of a viscous incompressible flow of a past an exponentially accelerated infinite isothermal vertical plate with uniform mass diffusion in the presence magnetic field are considered. The fluid considered here is a gray, absorbing-emitting radiation but a non-scattering medium. The plate temperature is raised to Tw and the concentration level near the plate is also raised to Cʹw . An exact solution to the dimensionless governing equations is obtained by the Laplace transform method, when the plate is exponentially accelerated with a v
APA, Harvard, Vancouver, ISO, and other styles
19

Musii, Roman, Petro Pukach, Nataliia Melnyk, Myroslava Vovk, and L’udomír Šlahor. "Modeling of the Temperature Regimes in a Layered Bimetallic Plate under Short-Term Induction Heating." Energies 16, no. 13 (2023): 4980. http://dx.doi.org/10.3390/en16134980.

Full text
Abstract:
A mathematical model for determining the temperature field of a bimetallic plate with plane-parallel boundaries during short-term induction heating by a non-stationary electromagnetic field is proposed. Initial boundary value problems for determining the parameters of a non-stationary electromagnetic field and temperature are formulated. The temperature and the component of the magnetic field intensity vector that is tangential to the plate base were selected as defining functions. We used an approximation of the defining functions in each layer of the plate with quadratic polynomials by the t
APA, Harvard, Vancouver, ISO, and other styles
20

Chu, Wan Shun, and Farazila binti Yusof. "Influence of Different Anvil Back Plates on Heat Dissipation Velocity of the Micro-Friction Stir Welding Process." Applied Mechanics and Materials 786 (August 2015): 415–20. http://dx.doi.org/10.4028/www.scientific.net/amm.786.415.

Full text
Abstract:
The objective of this study is to investigate effects of different anvil back plates on heat dissipation velocity of the micro-friction stir welding (micro-FSW or) process. For this purpose, temperature field simulations are conducted for the micro-friction stir welding of AA5083-H323 aluminum alloy thin sheets by using the ceramic anvil back plate and conventional steel anvil back plate, respectively. Comparing the obtained two temperature fields, it is found that the ceramic anvil back plate significantly decreases the heat dissipation velocity of the micro-FSW process.
APA, Harvard, Vancouver, ISO, and other styles
21

Sun, Chuang, Yang Zhao, De Fu Li, Qing Ai, and Xin Lin Xia. "Thermal Response Characteristics of Flat Plate Heated by High Temperature and High Speed Flow." Applied Mechanics and Materials 448-453 (October 2013): 3316–19. http://dx.doi.org/10.4028/www.scientific.net/amm.448-453.3316.

Full text
Abstract:
According to the view of heat transfer, the process of the fluid flow with high temperature and high speed over a flat plate may be considered as the heat transfer process within a compressible thermal boundary layer. Based on the numerical results of thermal isolation assumption, combining the temperature comparison with modification method, a coupled method of convection heat transfer coefficient with temperature field of the plate is established, and the characteristics of the thermal response for the flat plate is dominated. Take some ribbed plates as instances, the convection heat transfe
APA, Harvard, Vancouver, ISO, and other styles
22

Pawlus, Dorota. "Sensitivity of Composite Structure with Directional Properties of Annular Three-Layered Plate Mechanically and Thermally Loaded." Mechanics and Mechanical Engineering 22, no. 3 (2020): 691–702. http://dx.doi.org/10.2478/mme-2018-0054.

Full text
Abstract:
AbstractPaper presents the sensitivity of the three-layered plate structure on the acting of mechanical and thermal loads. The cases of the annular plates, whose individual layers: facings and core have homogeneous building and/or heterogeneous one expressed by the variable material properties in radial direction have been examined. Numerical investigations have been carried out modelling the select examples of plate structure with the use of the finite element method. Plate is loaded in the plane of facings or is subjected to the flat temperature field. The evaluation of the structure sensiti
APA, Harvard, Vancouver, ISO, and other styles
23

Кожушнер, М. А., В. С. Посвянский, Б. В. Лидский, В. Л. Боднева та Л. И. Трахтенберг. "Сверхпроводимость, инициированная электрическим полем в высокотемпературном сверхпроводнике при T>T-=SUB=-c-=/SUB=-". Физика твердого тела 62, № 8 (2020): 1154. http://dx.doi.org/10.21883/ftt.2020.08.49595.059.

Full text
Abstract:
Abstract The theory of occurrence of superconductivity in the plate of high-temperature superconductor under electric field vertical to it, when the carrier concentration lies outside of the region of existence of superconductivity at the temperature T < $$T_{{\text{c}}}^{{\max }}$$ , was developed. The calculation was carried out for the layer of lanthanum strontium cuprate under the fields of 10^–1 V/nm ≥ E ≥ 10^–2 V/nm at various temperatures and hole concentrations. It was demonstrated that the quasi-two-dimensional superconducting layer of several Angstrom in thickness occurs near surf
APA, Harvard, Vancouver, ISO, and other styles
24

Yi, Feng, and Xue Feng Liu. "Numerical Simulation of Temperature Field and Microstructure of a Wide Copper Plate during Warm Mold Continuous Casting." Materials Science Forum 898 (June 2017): 1289–99. http://dx.doi.org/10.4028/www.scientific.net/msf.898.1289.

Full text
Abstract:
Wide plates are mainly prepared through traditional cold mold continuous casting technology. A problem is cracking which caused by the non-uniform temperature field in solidification. Warm mold continuous casting is a new technology. Warm mold continuous casting of wide copper plate (section 500mm×12mm) was studies. Temperature field, solid/liquid interface and microstructure were analyzed by ProCAST software. By simulation, the optimal processing parameters: withdrawing speed was 60-80 mm/min, and the temperature of copper melt, mold and cooling water were 1200°C, 800-900oC and 20 oC, respect
APA, Harvard, Vancouver, ISO, and other styles
25

Sedelnikov, A. V., D. I. Orlov, V. V. Serdakova, and A. S. Nikolaeva. "Investigation of the Stress-Strain State of a Rectangular Plate after a Temperature Shock." Mathematics 11, no. 3 (2023): 638. http://dx.doi.org/10.3390/math11030638.

Full text
Abstract:
In this paper, the temperature shock phenomenon is considered. This phenomenon occurs during the operation of engineering structures on Earth and in outer space. A rectangular plate has been selected as a structural element exposed to temperature shock. It has a rigidly sealed edge and three free edges. A one-dimensional third initial boundary value problem of thermal conductivity was posed and solved to study the stress–strain state of the plate. Fourier’s law was used to solve this problem, taking into account the inertial term, since the temperature shock is a fairly fast-dynamic phenomenon
APA, Harvard, Vancouver, ISO, and other styles
26

Baghdasaryan, G. Y., M. A. Mikilyan, R. O. Saghoyan, and H. S. Grigoryan. "Flutter of flexible plate in an inhomogeneous temperature field." Mechanics - Proceedings of National Academy of Sciences of Armenia 65, no. 4 (2012): 33–54. http://dx.doi.org/10.33018/65.4.4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
27

Zhang, Zhi Min, Wei Yu, and Qing Wu Cai. "Control Basis for Cooling Rate of Plates during Roller Quenching in High-Pressure Zone." Advanced Materials Research 538-541 (June 2012): 2090–94. http://dx.doi.org/10.4028/www.scientific.net/amr.538-541.2090.

Full text
Abstract:
A basis based on temperature field is developed to control the cooling rate of plates during roller quenching in high-pressure zone. In order to determine the optimal cooling rate of plate during roller quenching, temperature field of SPV490 plate during quenching was calculated. Then a formula for calculating cooling rate of the center for plate at a certain cooling intensity during roller quenching in high-pressure zone was put forward and the control basis for cooling rate of plate during roller quenching in high-pressure zone was suggested. The cooling rates and corresponding heat transfer
APA, Harvard, Vancouver, ISO, and other styles
28

Jilavyan, Samvel H., and Edmon R. Grigoryan. "ON OPTIMAL CONTROL OF THERMOELASTIC VIBRATIONS OF A PLATE-STRIP." Proceedings of the YSU A: Physical and Mathematical Sciences 58, no. 1 (263) (2024): 13–21. http://dx.doi.org/10.46991/pysu:a.2024.58.1.013.

Full text
Abstract:
The problem of optimal control of elastic vibrations of an isotropic plate-strip under the influence of temperature and force fields is studied. The function of changing the external load on the plane of the plate is represented as a control function. Optimal control is also carried out by the distribution function of the temperature of the external field over the plate. The well-known classical hypotheses of thermo-elastic bending of the plate are accepted. The equations of transverse vibrations of the plate and heat conduction in the plate are solved under the boundary conditions of heat tra
APA, Harvard, Vancouver, ISO, and other styles
29

Liu, Huawei, and Linxin Niu. "Finite Element Simulation Research on Medium Plate Multi-Pass Welding Temperature Field." Open Mechanical Engineering Journal 9, no. 1 (2015): 786–90. http://dx.doi.org/10.2174/1874155x01509010786.

Full text
Abstract:
V-grooved steel plate 30mm in thickness has been taken into consideration to research on the distribution of temperature field for the multi-pass welding of steel plate with intermediate thickness in the whole process of welding and cooling. With the establishment of a reasonable three-dimensional solid model, the utility of ANSYS software for finite element analysis, the usage of birth-death elements and the setting of normal Gauss heat source, steps have been undertaken to achieve the goal that the process of multi-pass welding about steel plate in intermediate thickness is simulated and the
APA, Harvard, Vancouver, ISO, and other styles
30

Chen, J., Y. Qi, Y. Shi, and Z. Bi. "An analytical model to predict bending angles in high-frequency induction heat forming." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 224, no. 3 (2009): 655–60. http://dx.doi.org/10.1243/09544062jmes1910.

Full text
Abstract:
In induction heat forming, the deformation field of the metal plate is dependent on the temperature field. In the investigations on the temperature field, by defining a dimensionless temperature and a special Y-coordinate, it can be found that temperature distributions in the Y′-direction are similar for different thicknesses. To predict the bending deformation, an analytical model of temperature distribution is derived based on the similarity of temperatures at different thicknesses. An analytical model of the bending angle under the temperature gradient mechanism in the straight-line inducti
APA, Harvard, Vancouver, ISO, and other styles
31

Bawankar, L. C., and G. D. Kedar. "MAGNETO-THERMOELASTIC PROBLEM WITH EDDY CURRENT LOSS OF A THERMOSENSITIVE CONDUCTIVE PLATE." Advances in Mathematics: Scientific Journal 10, no. 1 (2021): 557–70. http://dx.doi.org/10.37418/amsj.10.1.55.

Full text
Abstract:
In this paper a two dimensional magneto-thermoelastic problem of a thermosensitive finite conducting plate with eddy current loss is considered. It is assumed that the plate is influenced by a time-varying external magnetic field and that the heating is caused by Joule heat. The fundamental equations for magnetic field, heat conduction and elastic fields are formulated. Temperature dependent material properties and heat source as eddy current loss is considered in the heat conduction equation. Kirchhoff's variable transformation is employed to convert nonlinear to linear heat conduction equati
APA, Harvard, Vancouver, ISO, and other styles
32

ACAR, Mahmut Caner. "Computational Thermal Analysis of Divergent and Convergent Flow Channels for Cooling Plates in PEM Fuel Cells." Bitlis Eren Üniversitesi Fen Bilimleri Dergisi 12, no. 1 (2023): 180–91. http://dx.doi.org/10.17798/bitlisfen.1220772.

Full text
Abstract:
During the operation of polymer electrolyte membrane fuel cells excess heat is generated as a result of electrochemical reactions. This heat raises the temperature of the polymer electrolyte membrane fuel cells, which can damage the membrane. Homogeneity of the temperature through the fuel cell is important in terms of stability and performance. Thermal management is therefore essential and is provided by the cooling channels formed on the bipolar plates or cooling plates. In this paper, a three-dimensional computational analysis of the cooling plate with divergent and convergent flow field de
APA, Harvard, Vancouver, ISO, and other styles
33

Su, Tianxi, Yongzhi Ma, Baolin Wang, Xiaowen Luan, Hui Li, and Xuelong Zhang. "Numerical Simulation of Airflow Organization in Vulcanization Tanks for Waste Tires." Polymers 17, no. 2 (2025): 232. https://doi.org/10.3390/polym17020232.

Full text
Abstract:
Currently, in the domestic practice of retreading tires using vulcanization tanks, some tanks exhibit uneven temperature distributions leading to low retreading success rates. To address that, this paper simulated the temperature and velocity fields during the heating process of vulcanization tanks for waste tire retreading. The results indicated that a higher heating power reduces the time required for the vulcanizing agent to reach the vulcanization condition, but it also increases the difference in tire temperature in the tank, with a severely uneven distribution of the temperature field. S
APA, Harvard, Vancouver, ISO, and other styles
34

Maurya, Chandra Shekhar, and Chiranjit Sarkar. "Magnetic and Transient Temperature Field Simulation of Plate–Plate Magnetorheometer Using Finite-Element Method." IEEE Transactions on Magnetics 56, no. 4 (2020): 1–9. http://dx.doi.org/10.1109/tmag.2019.2960237.

Full text
APA, Harvard, Vancouver, ISO, and other styles
35

Zhang, Wen, Min Wu, Sheng Du, Luefeng Chen, Jie Hu, and Xuzhi Lai. "Modeling of Steel Plate Temperature Field for Plate Shape Control in Roller Quenching Process." IFAC-PapersOnLine 56, no. 2 (2023): 6894–99. http://dx.doi.org/10.1016/j.ifacol.2023.10.493.

Full text
APA, Harvard, Vancouver, ISO, and other styles
36

Zhou, Guang Tao, Zi Yu Zhao, Guo Li Liang, and Wei Hua Chen. "Investigation on the Welding Temperature Field Measurement in Gas Tungsten Arc Welding." Materials Science Forum 704-705 (December 2011): 786–89. http://dx.doi.org/10.4028/www.scientific.net/msf.704-705.786.

Full text
Abstract:
Based on the gas tungsten arc welding process this paper investigated the welding temperature field measurement and simulation of 945 steel plate and AZ31B magnesium alloy, using a non-contact and fast response measured temperature method-Infrared Radiation (IR)-which utilized the baffle to remove the arc and hot tungsten electrode interference, the top-face temperature of AZ31B magnesium alloy plate and 945 steel plate. The results indicated that the lengthwise isothermal map of 945 steel plate is much longer than that of AZ31B magnesium alloy plate, which leads to the most temperature field
APA, Harvard, Vancouver, ISO, and other styles
37

Sinha, Anuja, and Lipismita Choudhury. "MHD Flow from a Vertical Porous Plate in Presence of Heat Source." Asian Research Journal of Mathematics 20, no. 11 (2024): 177–86. http://dx.doi.org/10.9734/arjom/2024/v20i11869.

Full text
Abstract:
Aim: With a heat source present, this analytical study aims to examine the thermal radiation affects the unsteady MHD free convective mass transfer flow through a semi-infinite vertical porous plate with a changing suction velocity. Study Design: On this plate, a uniform transverse magnetic field is applied perpendicularly. The non-dimensional governing equations are resolved by applying a simple perturbation technique. Place and Duration of Study: Department of Mathematics, The Assam Royal Global University, Guwahati, Assam between January 2024 to August 2024. Methodology: We allow an infinit
APA, Harvard, Vancouver, ISO, and other styles
38

Zhang, Tian Yu, and Hua Chen. "Numerical Simulation of Laser Welding for Different Thickness Aluminum Alloy Plate." Advanced Materials Research 391-392 (December 2011): 642–47. http://dx.doi.org/10.4028/www.scientific.net/amr.391-392.642.

Full text
Abstract:
The temperature field and stress field of laser welding were simulated by "ansys" analysis soft of finite element for different thickness aluminum alloy plate. The results show that quasi steady state temperature field were formed after laser act on aluminum alloy plate for a certain time. Because heating volume of thin plate is small than one of thickness plate under the same amount of heat input, thin plate has greater grads of temperature and melting pool size. Distribution law of heat stress is similarity with common melt welding. However. heat stress filed area and its peak value of thin
APA, Harvard, Vancouver, ISO, and other styles
39

PLESKACHEVSKY, Yuriy M., Eduard I. STAROVOITOV, and Denis V. LEONENKO. "NATURAL OSCILLATIONS OF CIRCULAR SANDWICH PLATES IN THE TEMPERATURE FIELD." Mechanics of Machines, Mechanisms and Materials 4, no. 69 (2024): 70–77. https://doi.org/10.46864/1995-0470-2024-4-69-70-77.

Full text
Abstract:
The effect of a homogeneous temperature field on the frequencies of natural oscillations of a circular sandwich plate is investigated. The hypothesis of a broken line is used as a kinematic one: for identical high-strength thin load-bearing layers, the Kirchhoff hypothesis; for a light incompressible thicker filler, the Timoshenko hypothesis on the straightness and incompressibility of a deformed normal. The differential equations of the transverse vibrations of the plate are obtained by the variational method. The desired functions are plate deflection and displacement in the filler. The anal
APA, Harvard, Vancouver, ISO, and other styles
40

Wessapan, Teerapot, Phadungsak Rattanadecho, Nisakorn Somsuk, Manop Yamfang, Manaporn Guptasa, and Prempreeya Montienthong. "Thermal Effects of Electromagnetic Energy on Skin in Contact with Metal: A Numerical Analysis." Energies 16, no. 16 (2023): 5925. http://dx.doi.org/10.3390/en16165925.

Full text
Abstract:
It has been well recognized that interactions between electromagnetic fields and metals are very strong. The consequence of human tissue in contact with metal, when subjected to an alternating electromagnetic field, is an increase in tissue temperature, which results from metals absorbing the energy obtained through induction. However, the electromagnetic induction characteristics and tissue energy absorbed caused by various electromagnetic field exposure conditions have not been well understood. A computational model was developed and employed in this study to assess the temporal and spatial
APA, Harvard, Vancouver, ISO, and other styles
41

Yang, Xiaoyu, Guizhen Yan, Yanfei Xiu, et al. "Welding Temperature Distribution and Residual Stresses in Thick Welded Plates of SA738Gr.B Through Experimental Measurements and Finite Element Analysis." Materials 12, no. 15 (2019): 2436. http://dx.doi.org/10.3390/ma12152436.

Full text
Abstract:
A numerical and experimental study of welding temperature distribution and residual stresses in thick welded plates of SA738Gr.B was conducted. Within the framework of numerical investigations, the temperature field of SA738 thick plate welding was simulated and analysed by using 2-D modelling technology. The temperature field was checked by using the thermal cycle curve with the aim of increasing the computational accuracy and efficiency, and the temperature field was verified by using the thermal cycle curve and heat affected zone. The welding stress field was analysed based on the temperatu
APA, Harvard, Vancouver, ISO, and other styles
42

Xu, Wen Ji, Jian Cheng Fang, T. Wang, and F. Liu. "A Numerical Simulation for Temperature Field of Plasma Arc Cutting Ceramics." Key Engineering Materials 280-283 (February 2007): 1811–14. http://dx.doi.org/10.4028/www.scientific.net/kem.280-283.1811.

Full text
Abstract:
To solve the difficult problem of selecting processing parameters of plasma arc cutting ceramic (PACC), the heat conduction model of PACC has been established and the calculating formulations of temperature field have been derived. Then, the distributions and influence factors, such as arc power, cutting speed and workpiece thickness, of temperature field of the ceramic plate and the anode plate have been studied. Based on the work above, the required arc power can be calculated. Moreover, the relation between thickness of ceramic plate and anode plate can be determined, which provides a helpf
APA, Harvard, Vancouver, ISO, and other styles
43

Xu, Wei Zheng, Shao Chun Zheng, and Xu Dong Han. "The Line Heating Temperature Field Theory Analysis and Numerical Simulation." Applied Mechanics and Materials 316-317 (April 2013): 1087–93. http://dx.doi.org/10.4028/www.scientific.net/amm.316-317.1087.

Full text
Abstract:
This paper analyzed the endothermic efficiency of the plate in line heating process combing with the need of researching on the recovery of waste heat in the gas flame process. Firstly the non-linear partial differential equations of three-dimensional transient temperature field were derived with the analysis of hexahedron in the plate. Then the temperature field of the plate was numerically simulated using gaussian heat source heat flux model with ANSYS software. Finally the heat absorption efficiency formula of the plate was derived based on the finite volume method. The endothermic efficien
APA, Harvard, Vancouver, ISO, and other styles
44

Rao Kanuri, Venkat, Sridevi Dandu, Santhi Gottumukkala, and Nagubabeswara Rao Cheemalapati. "Steady Natural Convection Heat and Mass Transfer Due to a Horizontal Line Source in the Presence Of Magnetic Field and Chemical Reaction." International Journal of Engineering & Technology 7, no. 3.31 (2018): 168. http://dx.doi.org/10.14419/ijet.v7i3.31.18292.

Full text
Abstract:
Natural convective heat and mass transfer due to a horizontal line source at an adiabatic plate and plane plume flow are analyzed in the presence of magnetic field and chemical reaction. The case of an isothermal plate and a plate of varying temperature are also discussed. Certain qualitatively distinct behaviours of the transport parameters noticed are - for an adiabatic plate as well as an isothermal plate, the transport parameters have exhibited asymptotic behaviour with the Prandtl number and Schmidt number. For Plume flow centre line velocity has exhibited asymptotic behaviour with Prandt
APA, Harvard, Vancouver, ISO, and other styles
45

Ortega, M. A., and J. T. Sielawa. "Thermally Induced Flow in a Rotating Annulus Filled With a Compressible Fluid." Journal of Fluids Engineering 110, no. 2 (1988): 134–39. http://dx.doi.org/10.1115/1.3243525.

Full text
Abstract:
The thermally induced flow field, in a rapidly rotating container consisting of a pair of coaxial cylinders bounded on the top and bottom by horizontal end plates, is considered. The top plate is heated and the bottom plate is cooled, both by small amounts, so that the thermal Rossby number is small, and the cylinders are supposed to be conductive. The induced velocity and temperature fields are determined by subdivision of the flow field; the equation for the central part, the inner core, is solved numerically as well as analytically.
APA, Harvard, Vancouver, ISO, and other styles
46

Pawlus, Dorota. "Three-Layered Annular Plate Made of Functionally Graded Material Under a Static Temperature Field." Materials 17, no. 22 (2024): 5484. http://dx.doi.org/10.3390/ma17225484.

Full text
Abstract:
The presented problem considers the static temperature analysis of a three-layered, annular plate with heterogeneous facings made of material with radially variable parameters. They are defined by the accepted exponent functions. The plate is composed of thin metal facings and a thicker foam core. The plate is loaded with a flat temperature field with a gradient directed across the plate radius. Using the approximation finite-difference method, the eigen-value problem is solved in order to calculate the temperature differences between plate edges, which cause a loss of plate stability. Taking
APA, Harvard, Vancouver, ISO, and other styles
47

Chang, Bin, Tao Yuan, Yansong Wang, et al. "Temperature fields analysis and heat dissipation structure design of an film capacitor in new energy vehicle." Thermal Science, no. 00 (2024): 240. http://dx.doi.org/10.2298/tsci240627240c.

Full text
Abstract:
The high-temperature resistance performance of film capacitors in motor controllers faces greater challenges with the development of high voltage and high power density of new energy vehicles (NEVs). In this study, a typical film capacitor is taken as the object of research; simulations of temperature fields and experiments on temperature rises are conducted. Additionally, a heat dissipation structure is designed to enhance the high-temperature resistance performance of the capacitor. Firstly, the temperature field distributions of the capacitor under different ripple currents and ambient temp
APA, Harvard, Vancouver, ISO, and other styles
48

Treputneva, Tatiana, Oleg Popov, Margarita Moiseenko, Vladislav Maksak, Anatoly Malinovskiy, and Nikita Mescheulov. "Temperature influence on strain state of a flexible plate." MATEC Web of Conferences 143 (2018): 01015. http://dx.doi.org/10.1051/matecconf/201814301015.

Full text
Abstract:
Developing analytical methods for studying the strain state of flexible plates is a relevant issue, especially for complex problems that recognize nonlinear operation and temperature-dependent changes in mechanical properties of materials. The paper analyzes the stress-strain state of a two-field flexible plate with an initial deflection exposed to a non-uniform temperature field. It presents and analyzes the results of the numerical studies based on an algorithm developed by the authors for designing anisotropic rectangular structural elements with discontinuous parameters, taking into accoun
APA, Harvard, Vancouver, ISO, and other styles
49

Xu, Honghai, and Jie Gao. "Temperature field simulation analysis for hot blast valve of blast furnace." Journal of Physics: Conference Series 2862, no. 1 (2024): 012036. http://dx.doi.org/10.1088/1742-6596/2862/1/012036.

Full text
Abstract:
Abstract The hot blast valve of the blast furnace was studied, and combined with the theory of fluid-solid coupling heat transfer, Fluent software was used to simulate and analyze the temperature field of the hot blast valve of the blast furnace under two working conditions: fully opened and fully closed. The analysis result showed that during the fully opened condition of the hot blast valve, the highest temperature of the valve body reached 1, 332.3°C, which is located on the refractory surface of the hot-air valve duct. The highest temperature of the valve plate is 837.2°C, which is located
APA, Harvard, Vancouver, ISO, and other styles
50

Sokolov, A. K. "Temperature field of an infinite plate at small Fourier numbers." Steel in Translation 37, no. 3 (2007): 208–13. http://dx.doi.org/10.3103/s0967091207030084.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!