Relevant bibliographies by topics / Plates

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Plates'

Author: Grafiati
Published: 4 June 2021
Last updated: 25 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Plates.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Plates"

1

Gordienko, Yuri, Elena Zasimchuk, and Rimma Gontareva. "Heterogeneous Pattern Formation at Aluminum Surface — Fourier, Morphology and Fractal Analysis." Materials Science Forum 567-568 (December 2007): 169–72. http://dx.doi.org/10.4028/www.scientific.net/msf.567-568.169.

Full text
Abstract:
Surface analysis of the aluminum thin plates plastically deformed under constrained cyclic deformation was performed by Fourier, morphology and fractal techniques. The plates are used for estimation of deformation damage and fracture in places with a priori known homogeneous and heterogeneous strain distribution. Advantages and disadvantages of Fourier, morphology and fractal techniques for characterization of the intersections and projections are discussed in the context of its applicability to investigation of plastic deformation and fracture (persistent strain planes and directions, strain
APA, Harvard, Vancouver, ISO, and other styles
2

Maquoi, R., and M. Skaloud. "Stability of plates and plated structures." Journal of Constructional Steel Research 55, no. 1-3 (2000): 45–68. http://dx.doi.org/10.1016/s0143-974x(99)00077-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Lim, Teik Cheng. "Auxetic Plates on Auxetic Foundation." Advanced Materials Research 974 (June 2014): 398–401. http://dx.doi.org/10.4028/www.scientific.net/amr.974.398.

Full text
Abstract:
Auxetic solids are materials that exhibit negative Poisson’s ratio. This paper evaluates the maximum stresses in point-loaded (a) auxetic plates on conventional elastic foundation, (b) conventional plates on auxetic elastic foundation, and (c) auxetic plates on auxetic elastic foundation vis-à-vis conventional plates on conventional elastic foundation. Using thick plate theory for infinite plates on elastic foundation, it was found that in most cases the auxetic plates and auxetic foundation play the primary and secondary roles, respectively, in reducing the plate’s maximum stresses. It is he
APA, Harvard, Vancouver, ISO, and other styles
4

VLASKIN, M. S., A. V. GRIGORENKO, E. I. SHKOLNIKOV, and A. S. ILYUKHIN. "GOLD-PLATED TITANIUM VS CARBON-IMPLANTED TITANIUM AS MATERIAL FOR BIPOLAR PLATES IN PEM FUEL CELLS." Surface Review and Letters 26, no. 08 (2019): 1950038. http://dx.doi.org/10.1142/s0218625x19500380.

Full text
Abstract:
Three different types of current-collecting plates for air-hydrogen PEM fuel cell were manufactured and tested: unmodified titanium plates; gold-plated titanium plates and titanium plates treated by carbon ions implantation. It was shown that the applied surface modifications reduce contact resistance between titanium plate and carbon gas diffusion layer. Total ohmic resistance of fuel cell is reduced by 1.8 and 1.4 times in case of gold-plated titanium and carbon-implanted titanium, respectively, in comparison with uncoated titanium. Although gold plating turned out to be more profitable than
APA, Harvard, Vancouver, ISO, and other styles
5

Deng, Lang Ni, Hua Chen, and Kan Kang. "Flexural Strengthening of Reinforced Concrete Beams with Prestressed CFRP Plates." Advanced Materials Research 255-260 (May 2011): 3077–81. http://dx.doi.org/10.4028/www.scientific.net/amr.255-260.3077.

Full text
Abstract:
Four medium -scale reinforced concrete beams were constructed and tested to investigate the effectiveness of external poststrengthening with prestressed carbon fiber reinforced polymer (CFRP) plates. The various variables included the strengthening method and the amount of prestressing. The experiments consisted of one control beam, one nonprestressed CFRP-bonded beam, and two prestressed CFRP-bonded beams, all the beams were subjected to four-point bending tests. In comparison to the control beam and the nonprestressed CFRP-bonded beam, the cracking load, yield load, ultimate load and stiffne
APA, Harvard, Vancouver, ISO, and other styles
6

Fessler, H., and C. Pappalettere. "Plastic-Elastic strains in two-dimensional sections of partial-penetration fillet welds." Journal of Strain Analysis for Engineering Design 24, no. 1 (1989): 15–21. http://dx.doi.org/10.1243/03093247v241015.

Full text
Abstract:
The photoelastic coating technique was used to study plastic strains at the orthogonal intersections of plates, formed by welding two side plates, without weld preparation, to a main plate. Models were cut from this weldment, perpendicularly to the planes of the plates. These models were loaded by tension and pure bending applied to the side plates. Although yielding starts at the weld toes, it remains constrained there due to the greater strength of the heat-affected zone. Plastic collapse occurs in the ‘parent’ plate. This phenomenon is due to the heat affected zone, not due to the notch for
APA, Harvard, Vancouver, ISO, and other styles
7

Ahmad Khan, Muhsin, and J. P Kesari. "Analysis of Mean Plate Temperature of Flat Plates in Ordinary and PVT Setup." International Journal of Science and Research (IJSR) 10, no. 8 (2021): 703–8. https://doi.org/10.21275/sr21818214120.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Soleimani, Ebrahim, Mohammad Reza Tabeshpour, and Mohammad Saeed Seif. "Parametric study of buckling and post-buckling behavior for an aluminum hull structure of a high-aspect-ratio twin hull vessel." Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment 234, no. 1 (2019): 15–25. http://dx.doi.org/10.1177/1475090219868635.

Full text
Abstract:
Metal plates are essential parts of structures such as ship hulls and offshore oil platforms. These plates are typically under compressive axial forces. Hence, one of the main mechanisms for failure and collapse of such structures is buckling of plates. Thus, for safe and secure design, buckling strength of plates should be evaluated. Finite element analysis techniques are perfect tools for this purpose because of the accuracy and flexibility for performing simulations with different variables. In this study, the strength of aluminum plates has been studied using finite element analysis softwa
APA, Harvard, Vancouver, ISO, and other styles
9

Li, Xinhai, Haixin Luo, Lingcheng Zeng, Chenxu Meng, and Yanhe Yin. "Faster R-CNN Algorithm Based Relay Protection Platen State Identification Method." Journal of Physics: Conference Series 2160, no. 1 (2022): 012078. http://dx.doi.org/10.1088/1742-6596/2160/1/012078.

Full text
Abstract:
Abstract Currently, the check of the relay protection pressure plate’s throw-out status is mainly carried out manually, due to the extremely large number of decompression plates, manual methods can cause detection errors due to fatigue. This paper proposes the processing of relay protection pressure plate photographs by using image processing techniques, the Faster R-CNN image recognition algorithm uses the feature of generating detection frames directly using RPN to identify the platen throwback status of the processed platen images, greatly improving the speed and accuracy of the detection f
APA, Harvard, Vancouver, ISO, and other styles
10

Zheng, Yu Fang, Tao Chen, Feng Wang, and Chang Ping Chen. "Nonlinear Responses of Rectangular Magnetoelectroelastic Plates with Transverse Shear Deformation." Key Engineering Materials 689 (April 2016): 103–7. http://dx.doi.org/10.4028/www.scientific.net/kem.689.103.

Full text
Abstract:
With employing the transverse shear deformation theory and von Karman plate theory, the nonlinear static behavior of a simply supported rectangular magnetoelectroelastic plates is investigated. According to the Maxwell’s equations, when applying the magnetoelectric load on the plate’s surfaces and neglecting the in-plane electric and magnetic fields in thin plates, the electric and magnetic potentials varying along the thickness direction of the magnetoelectroelastic plates are determined. The nonlinear differential equations for magnetoelectroelastic plates are established based on the Hamilt
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Plates"

1

Paulos, Yonas Kinfu. "Sedimentation between parallel plates." Thesis, University of British Columbia, 1991. http://hdl.handle.net/2429/30055.

Full text
Abstract:
Settling basins can be shortened by using a stack of horizontal parallel plates which develop boundary layers in which sedimentation can occur. The purpose of this study is to examine the design parameters for such a system and to apply this approach to a fish rearing channel in which settling length is strictly limited. Flow between parallel rough and smooth plates has been modelled together with sediment concentration profile. Accurate description of boundary layer flow requires the solution of Navier-Stokes equations, and due to the complexity of the equations to be solved for turbulent fl
APA, Harvard, Vancouver, ISO, and other styles
2

Ho, Wai Yiu. "License Plate Recognition algorithms and their application to Macao license plates." Thesis, University of Macau, 2010. http://umaclib3.umac.mo/record=b2182850.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Жигилій, Дмитро Олексійович, Дмитрий Алексеевич Жигилий, Dmytro Oleksiiovych Zhyhylii, Володимир Андрійович Хворост, Владимир Андреевич Хворост, and Volodymyr Andriiovych Khvorost. "Laminated composite plates." Thesis, Видавництво СумДУ, 2004. http://essuir.sumdu.edu.ua/handle/123456789/22944.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Lyrio, Mariana Camilo Negreiros 1980. "Analise mecanica e fotoelastica das tecnica de fixação interna rigida da osteotomia sagital utilizando placa convencional e placa com sistema de travamento em avanços mandibulares." [s.n.], 2009. http://repositorio.unicamp.br/jspui/handle/REPOSIP/287896.

Full text
Abstract:
Orientadores: Marcio de Moraes, Luciana Asprino<br>Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba<br>Made available in DSpace on 2018-08-13T02:18:28Z (GMT). No. of bitstreams: 1 Lyrio_MarianaCamiloNegreiros_M.pdf: 2393437 bytes, checksum: f0dfbf68baaeb080347c83445d15e1e9 (MD5) Previous issue date: 2009<br>Resumo: O propósito neste estudo foi realizar avaliação mecânica e fotoelástica de dois diferentes sistemas de fixação interna rígida (FIR): placas convencionais e placas com sistema de travamento. Para avaliação mecânica foi realizado tes
APA, Harvard, Vancouver, ISO, and other styles
5

Yin, Jianfei. "Structure-borne sound transmission between isotropic, homogeneous plates and periodic ribbed plates." Thesis, University of Liverpool, 2012. http://livrepository.liverpool.ac.uk/8193/.

Full text
Abstract:
The prediction of sound and vibration transmission in built-up structures is important for human comfort, health and safety. For structural reasons, engineering structures often incorporate periodic ribbed plates to increase stiffness and stability whilst reducing the weight. However, vibration propagation on periodic ribbed plates is complex due to the existence of stop/pass bands. This thesis is concerned with predicting vibration transmission between isotropic, homogeneous plates and periodic ribbed plates. The objectives are to investigate the use of Statistical Energy Analysis (SEA) and d
APA, Harvard, Vancouver, ISO, and other styles
6

Waddell, John M. "Scattering from rough plates." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 1995. http://handle.dtic.mil/100.2/ADA304997.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Price, Gareth James. "Microchannel plates in astronomy." Thesis, University of Leicester, 2001. http://hdl.handle.net/2381/8638.

Full text
Abstract:
This thesis describes both round-pore microchannel plates (MCPs) used in energetic pho¬ton and particle detectors and their square-pore offspring, micropore optics (MPOs), used to focus x-rays. A Monte Carlo electron raytracing software package is described that is used to predict the energy and angular distribution of electrons (EDOE and ADOE) in a microchannel electron multiplier's output charge cloud, including saturated operation. The model is shown to agree with experimental evidence. The addition of a micromachined electrostatic lens to the end of a microchannel is modelled and found to
APA, Harvard, Vancouver, ISO, and other styles
8

Martinsson, Johan. "Wear of Grate Plates." Thesis, KTH, Materialvetenskap, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-160603.

Full text
Abstract:
This report describe the wear of the protruding areas on the sides of the grate plates in the grate-kiln process in the hematite pellet production in LKAB, Kiruna. The steel plates are exposed to a hostile environment with heat cycles and corrosive atmosphere. An evaluation of the plates was made in co-operation with LKAB Metlab in Luleå and LKAB mechanical workshop in Kiruna. Instruments used are stereomicroscope, LOM, SEM, Spectroscope, Vickers Hardness and a surface nish meter. Results show the protruding areas of the plates are exposed to a tribochemical wear, where tops of the rough areas
APA, Harvard, Vancouver, ISO, and other styles
9

Fletcher, Michael. "Plumes, Plates and Porphyries." Thesis, The University of Sydney, 2022. https://hdl.handle.net/2123/28474.

Full text
Abstract:
This study developed an automated approach to understand plume and plate boundary interactions over time, investigating how flat slab and porphyry development are linked to formation mechanisms of major eastern Pacific Large Igneous Provinces (LIPs). Our method allows us to detail how the Shatsky-Hess conjugate collided with North America from 85 Ma, with the subducting front corresponding to porphyry development and matching divisions between shallow and flat slab areas. Our new formation model for the Enigma Ridge, conjugate to the Tuamotu Plateau, resolves problems for development of the Pe
APA, Harvard, Vancouver, ISO, and other styles
10

Datta, Sripati. "Some linear and nonlinear problems of thin elastic plates placed on elastic foundation." Thesis, University of North Bengal, 1999. http://ir.nbu.ac.in/handle/123456789/664.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Plates"

1

Bhaskar, K., and T. K. Varadan. Plates. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-69424-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bhaskar, K., and T. K. Varadan Retd. Plates. John Wiley & Sons, Ltd, 2014. http://dx.doi.org/10.1002/9781118894705.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Applewhite, Claire. Tennessee plates. L & L Dreamspell, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Sayle, Alexei. Barcelona plates. Sceptre, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Rigg, Annie. Small plates. Ryland Peters & Small, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Massachusetts. General Court. House of Representatives. Committee on Post Audit and Oversight. Repair plates. The Committee, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

(Firm), John Windle. Blake plates. John Windle, Antiquarian Bookseller, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Blaxland, Wendy. Mugs and plates. Marshall Cavendish Benchmark, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Chandrashekhara, K. Theory of plates. Univesity Press, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Foulger, Gillian R. Plates vs. Plumes. John Wiley & Sons, Ltd, 2010. http://dx.doi.org/10.1002/9781444324860.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Plates"

1

Kirchhoff, Gustav Robert. "Plates." In Fourier BEM. Springer Berlin Heidelberg, 2002. http://dx.doi.org/10.1007/978-3-540-45626-1_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Jin, Guoyong, Tiangui Ye, and Zhu Su. "Plates." In Structural Vibration. Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-46364-2_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Häussler-Combe, Ulrich. "Plates." In Computational Methods for Reinforced Concrete Structures. Wiley-VCH Verlag GmbH, 2014. http://dx.doi.org/10.1002/9783433603611.ch6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Freeland, Alan E., Michael E. Jabaley, and James L. Hughes. "Plates." In Stable Fixation of the Hand and Wrist. Springer New York, 1986. http://dx.doi.org/10.1007/978-1-4613-8640-7_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Neugebauer, O. "Plates." In Sources in the History of Mathematics and Physical Sciences. Springer New York, 1995. http://dx.doi.org/10.1007/978-1-4612-5507-9_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Rubinstein, Daniel. "Plates." In Fragmentation of the Photographic Image in the Digital Age. Routledge, 2019. http://dx.doi.org/10.4324/9781351027946-17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

"Plates." In Jewish Identities in Iran. I.B.Tauris, 2011. http://dx.doi.org/10.5040/9780755608614.plates.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

McLuckie, Duncan, Jaya Kandasamy, and Paul Sayers. "Plates." In Strategic Management of Flood Risk. ICE Publishing, 2018. http://dx.doi.org/10.1680/smfr.61378.plates.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

"Plates." In Thermal Insulation Materials for Building Applications. ICE Publishing, 2019. http://dx.doi.org/10.1680/timfba.63518.plates.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

"Plates." In Blue–Green Cities. ICE Publishing, 2020. http://dx.doi.org/10.1680/bgc.64195.plates.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Plates"

1

Beaumont, John, and Andrew Harvey. "2 IN 1 PLATES AND COILS FROM A PLATE STECKEL MILL." In 52º Seminário de Laminação. Editora Blucher, 2015. https://doi.org/10.5151/1983-4764-2015-217-27155.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Matsumura, Masahide, Ryoma Tsuruta, Seiji Okada, and Kiyoshi Ono. "Analytical Study on Ultimate Strength and Deformation of Stiffened Plates Made of Different Steel Grades." In IABSE Symposium, Tokyo 2025: Environmentally Friendly Technologies and Structures: Focusing on Sustainable Approaches. International Association for Bridge and Structural Engineering (IABSE), 2025. https://doi.org/10.2749/tokyo.2025.2690.

Full text
Abstract:
&lt;p&gt;Stiffened plates, consisting of stiffened plate panels, plate panels between longitudinal stiffeners and longitudinal stiffeners, are widely used in steel bridges, but buckling of each plate panel of the stiffened plate results in a sudden decrease in load carrying capacity of the member. Then a hybrid stiffened plate using high-strength steel in longitudinal stiffeners are being investigated to improve their load carrying capacity and deformation performance.&lt;/p&gt;&lt;p&gt;In this study, the load-carrying characteristics of the hybrid stiffened plates of various cross-sections an
APA, Harvard, Vancouver, ISO, and other styles
3

Sancaktar, E., A. Y. Asiri, and G. S. Kumar. "A Novel Economical Method to Improve the Toughness of Carbon/Epoxy Long Fiber Components by the Integration of Tow Loops Cores." In ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-59354.

Full text
Abstract:
In this research, solid and sandwich carbon/epoxy composite plates were developed, fabricated, and tested at two different crosshead speeds of 10 and 500 mm/min, under monotonic penetration tests, which perpendicularly applied a concentrated load to the simply supported plates. The cores of sandwich plates were made of carbon prepreg (with epoxy resin), as well as glass tow loops (without resin). The plates’ lay-up configuration sequence was {[0/90]n}s, where n was 1, 2 or 4. The objectives of this study were to determine the general sandwich plate behavior, as well as to analyze the effects o
APA, Harvard, Vancouver, ISO, and other styles
4

Chen, Yongbo, Masoud Hayatdavoodi, Binbin Zhao, and R. Cengiz Ertekin. "Wave Attenuation by Submerged Oscillating Plates." In ASME 2023 42nd International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2023. http://dx.doi.org/10.1115/omae2023-105070.

Full text
Abstract:
Abstract Submerged oscillating plates are used as heaving plates to reduce the motion of floating objects, in wave energy devices to extract the wave energy, and as breakwaters to attenuate the wave field in shallow water. In this study, we consider a horizontal, submerged plate in shallow water that is allowed to oscillate in the vertical direction due to the wave loads. The plate is attached to a linear spring and damper to control the oscillations. The focus of this study is on the transformation of the wave field by the submerged oscillating plate. To estimate the energy attenuation, wave
APA, Harvard, Vancouver, ISO, and other styles
5

Sang-Woo Choi, GooHwa Kim, Jinsu Bae, and Kwan-Tae Kim. "Ultrasonic plate wave properties in thin steel plates." In 2008 International Conference on Control, Automation and Systems (ICCAS). IEEE, 2008. http://dx.doi.org/10.1109/iccas.2008.4694421.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Cassarly, Bill, and J. Michael Finlan. "Aperture Filling Using Phase Plates At Self-Imaging Planes." In OSA Annual Meeting. Optica Publishing Group, 1989. http://dx.doi.org/10.1364/oam.1989.pd3.

Full text
Abstract:
Coherent arrays of lasers, especially diode lasers, are receiving increasing attention because of their ability to provide high power. However, arrays frequently require large spacings between elements, and this results in an unacceptable number of lobes in the far-field pattern. We demonstrate the use of binary phase plates at self-imaging (sub-Talbot) planes of the array to reduce the number of lobes and to increase the on-axis irradiance in the far field. The phase plates are etched in fused silica.
APA, Harvard, Vancouver, ISO, and other styles
7

Caruntu, Dumitru I., and Iris Alvarado. "Influence of van der Waals Forces on Electrostatically Actuated MEMS/NEMS Circular Plates." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-63798.

Full text
Abstract:
This paper deals with electrostatically actuated micro and nano-electromechanical (MEMS/NEMS) circular plates. The system under investigation consists of two bodies, a deformable and conductive circular plate placed above a fixed, rigid and conductive ground plate. The deformable circular plate is electrostatically actuated by applying an AC voltage between the two plates. Nonlinear parametric resonance and pull-in occur at certain frequencies and relatively large AC voltage, respectively. Such phenomena are useful for applications such as sensors, actuators, switches, micro-pumps, micro-tweez
APA, Harvard, Vancouver, ISO, and other styles
8

Abrate, Serge. "Vibration of Functionally Graded Plates." In ASME 8th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2006. http://dx.doi.org/10.1115/esda2006-95778.

Full text
Abstract:
This article considers the free vibration of plates for which materials properties vary continuously though the thickness. First, an examination of results available in the literature led to the discovery that the natural frequencies of such functionally graded plates are proportional to those of isotropic plates. In the usual formulation of existing plate theories, the midplane is taken as the reference surface and the variation in material properties through the thickness leads to coupling between inplane and bending deformations. The second part of this paper shows that it is possible to se
APA, Harvard, Vancouver, ISO, and other styles
9

"Color plates." In Volume Graphics 2005. IEEE, 2005. http://dx.doi.org/10.1109/vg.2005.194122.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

"Color Plates." In 2008 XXI Brazilian Symposium on Computer Graphics and Image Processing. IEEE, 2008. http://dx.doi.org/10.1109/sibgrapi.2008.50.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Plates"

1

Lemke, Zachariah. HEU Pancake Plates. Office of Scientific and Technical Information (OSTI), 2024. http://dx.doi.org/10.2172/2396850.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Grimley and Grant. PR-015-16601-R01 Variation in Orifice Plate Flow Performance as a Function of Geometric Plate Tolerances. Pipeline Research Council International, Inc. (PRCI), 2016. http://dx.doi.org/10.55274/r0010877.

Full text
Abstract:
Flow measurement tests were conducted with more than 25 API 14.3 compliant orifice plates that had been geometrically characterized. Possible sources for the variability in the flow measurement performance of these plates were investigated relative to the measured plate geometry elements.
APA, Harvard, Vancouver, ISO, and other styles
3

Nored and James. PR-015-07603-R01 Effect of Orifice Plate Manufacturing Variations on Orifice Meter Performance - Blinded. Pipeline Research Council International, Inc. (PRCI), 2013. http://dx.doi.org/10.55274/r0010636.

Full text
Abstract:
An investigation to flow test and measure a large set of orifice plates to determine the proportion of existing orifice plates have measured discharge coefficients outside of the Reader-Harris/Gallagher equation 95% confidence limits. The research determined if the existing tolerance specifications adequately describe the dimensions of an orifice plate required to conform to the Reader-Harris/Gallagher equation calculated discharge coefficient. The testing also underscored the influence of manufacturing variations on orifice plate performance.
APA, Harvard, Vancouver, ISO, and other styles
4

Nored and James. PR-015-07603-R02 Effect of Orifice Plate Manufacturing Variations on Orifice Meter Performance - Unblinded. Pipeline Research Council International, Inc. (PRCI), 2013. http://dx.doi.org/10.55274/r0010829.

Full text
Abstract:
An investigation to flow test and measure a large set of orifice plates to determine the proportion of existing orifice plates have measured discharge coefficients outside of the Reader-Harris/Gallagher equation 95% confidence limits. The research determined if the existing tolerance specifications adequately describe the dimensions of an orifice plate required to conform to the Reader-Harris/Gallagher equation calculated discharge coefficient. The testing also underscored the influence of manufacturing variations on orifice plate performance.
APA, Harvard, Vancouver, ISO, and other styles
5

Babuska, I., and L. Li. Hierarchic Modeling of Plates. Defense Technical Information Center, 1990. http://dx.doi.org/10.21236/ada232754.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Merlin, Roberto, and L. J. Guo. Optical Near-Field Plates. Defense Technical Information Center, 2015. http://dx.doi.org/10.21236/ada623018.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Pitt, Josh, ed. Extinction on our plates. Monash University, 2022. http://dx.doi.org/10.54377/42f4-f24c.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Cooper, J., and M. Evans. Electrochemical Machining of Metal Plates. Office of Scientific and Technical Information (OSTI), 2005. http://dx.doi.org/10.2172/15015141.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

O'Meara, J. E. Design charts for vacuum plates. Office of Scientific and Technical Information (OSTI), 1986. http://dx.doi.org/10.2172/6123482.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Jantzen, Ryan T., Kunihiko Taira, Kenneth O. Granlund, and Michael V. Ol. Vortex Dynamics around Pitching Plates. Defense Technical Information Center, 2014. http://dx.doi.org/10.21236/ada603996.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Plates' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography