Log in

Relevant bibliographies by topics / PLM implementation / Dissertations / Theses

To see the other types of publications on this topic, follow the link: PLM implementation.

Dissertations / Theses on the topic 'PLM implementation'

Author: Grafiati

Published: 5 June 2021

Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'PLM implementation.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Hart, Peter Bartholomew. "A plm implementation for aerospace systems engineering-conceptual rotorcraft design." Thesis, Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/28278.

Full text

Abstract:

The thesis will discuss the Systems Engineering phase of an original Conceptual Design Engineering Methodology for Aerospace Engineering-Vehicle Synthesis. This iterative phase is shown to benefit from digitization of Integrated Product&Process Design (IPPD) activities, through the application of Product Lifecycle Management (PLM) technologies. Requirements analysis through the use of Quality Function Deployment (QFD) and 7 MaP tools is explored as an illustration. A "Requirements Data Manager" (RDM) is used to show the ability to reduce the time and cost to design for both new and legacy/deri

APA, Harvard, Vancouver, ISO, and other styles

2

Cleve, Oscar, and Aleks Durowicz. "Increasing Commitment during PLM Implementation through Change Management : A Case Study at Dassault Systèmes." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-296356.

Full text

Abstract:

Product Lifecycle Management (PLM) is a way for manufacturing companies to counter the challenge of managing product information through its lifecycle. Change management is often overlooked during PLM implementations. This can lead to project failure and negative consequences for organizations. Additionally, one shortcoming of change management in PLM implementation is not considering individual commitment to change. Therefore, this case study’s purpose was to explore how change management can increase end-user commitment and thereby contribute to improved PLM implementations. This was investi

APA, Harvard, Vancouver, ISO, and other styles

3

Studený, Michal. "Implementace nových vzduchových jističů ABB SACE Emax 2 do produktové řady nízkonapěťových rozváděčů MNS." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220989.

Full text

Abstract:

The Master’s Thesis comprises a summary of the differences existing design of MNS switchgear series against AGOMIN project innovative proposal. The introduction deals with the introduction to the CAD program SolidWorks and its extension for enterprise data management SolidWorks Enterprise PDM. The body of the paper deals with a new range of air circuit breakers ABB SACE Emax 2 and their implementation into the product line of low voltage switchgears. Included are other improvements that together with implementation of circuit breakers AGOMIN project brings.

APA, Harvard, Vancouver, ISO, and other styles

4

Kim, Jung Sup, and Myung Jin Jang. "Implementation of A 30-Channel PCM Telemetry Encoder." International Foundation for Telemetering, 2004. http://hdl.handle.net/10150/604960.

Full text

Abstract:

International Telemetering Conference Proceedings / October 18-21, 2004 / Town & Country Resort, San Diego, California<br>The function of a PCM telemetry encoder, installed in moving vehicles such as automobiles, aircraft, missiles, and artillery projectiles, is to transform many physical variables, such as velocity, shock, temperature, vibration and pressure, into digital data. Also, the encoder is required to make a data frame composed of digital input signals and frame synchronous data. The framed data is supplied to the input of a transmitter. There are three critical considerations i

APA, Harvard, Vancouver, ISO, and other styles

5

Loo, Sek Yuen. "Design and implementation of an ISM-band PLL frequency synthesizer." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape4/PQDD_0029/MQ65503.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Tinsley, Laurie Huffman. "District Leadership Supporting PLC Implementation in a Rapid Growth District." Thesis, University of North Texas, 2016. https://digital.library.unt.edu/ark:/67531/metadc955053/.

Full text

Abstract:

A growing body of work has emerged regarding the responsibilities required of district leaders in establishing plans that initiate and create conditions for sustainability of continuous improvement achieved through a systemic reform structure such as professional learning communities. However, limited research exists in respect to sustaining cultures of continuous improvement in rapid growth districts. Rapid growth districts can be described as school systems, which construct and open multiple campuses annually. The underlying premise of this study considered how humans interact with one an

APA, Harvard, Vancouver, ISO, and other styles

7

Nam, Ju-Hun, Byeong-Doo Choi, Sung-Jea Ko, et al. "IMPLEMENTATION OF REAL-TIME AIRBORNE VIDEO TELEMETRY SYSTEM." International Foundation for Telemetering, 2005. http://hdl.handle.net/10150/605038.

Full text

Abstract:

ITC/USA 2005 Conference Proceedings / The Forty-First Annual International Telemetering Conference and Technical Exhibition / October 24-27, 2005 / Riviera Hotel & Convention Center, Las Vegas, Nevada<br>In this paper, we present an efficient real-time implementation technique for Motion-JPEG2000 video compression and its reconstruction used for a real-time Airborne Video Telemetry System. we utilize Motion JPEG2000 and 256-channel PCM Encoder was used for source coding in the developed system. Especially, in multiplexing and demultiplexing PCM encoded data, we use the continuous bit-stream fo

APA, Harvard, Vancouver, ISO, and other styles

8

Bondan, Widyatmoko. "The Implementation of Indonesian Sustainable Palm Oil Certification (ISPO):Opportunity for Inclusion of Palm Oil Smallholder in Riau Province." Kyoto University, 2019. http://hdl.handle.net/2433/242760.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Andersson, Karl. "PLC Lab Station : An Implementation of External Monitoring and Control Using OPC." Thesis, Mittuniversitetet, Avdelningen för elektronikkonstruktion, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-22649.

Full text

Abstract:

The PLC is frequently used when implementing automated control, which is animportant part of many modern industries. This thesis has been carried out incollaboration with ÅF Consult in Sundsvall, who were in need of a PLC labstation for educational purposes. The overall aim of this thesis has been todesign and construct such a lab station and also to implement a solution forexternal monitoring and control possibilities. The methodology of this projecthas included a literary study, followed by the implementation of the actualsolutions and finally an evaluation of the project. The finished lab s

APA, Harvard, Vancouver, ISO, and other styles

10

Tubbs, Casey. "IRIG-106 PCM IMPLEMENTATION UTILIZING CONSULTATIVE COMMITTEE FOR SPACE DATA SYSTEMS (CCSDS)." International Foundation for Telemetering, 1990. http://hdl.handle.net/10150/613777.

Full text

Abstract:

International Telemetering Conference Proceedings / October 29-November 02, 1990 / Riviera Hotel and Convention Center, Las Vegas, Nevada<br>Asynchronous data sources such as those associated with Space Based Radar create a unique problem for Time Division Multiplexed (TDM) Pulse Code Modulation (PCM) frame formats. The problem consists of data arrival based on external occurrences such as target tracking, and not due to sampling polls from internal sequencers. Reserved time slots for asynchronous data must be provided within the synchronous TDM telemetry stream. This increases the required ba

APA, Harvard, Vancouver, ISO, and other styles

11

Stolpe, Pär. "Evaluation and Implementation of SCADA Systems." Thesis, Linköping University, Department of Electrical Engineering, 2001. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-971.

Full text

Abstract:

<p>In this bachelor thesis a comparison and evaluation of six different process visualization programs has been made. The purpose of the comparison is to find a suitable program for an experiment in control, held at Linköpings universitet, but also to get an overview of the market at the time this report was written. </p><p>After the evaluation an implementation is carried out with the programs that were bought. RSLogix, InTouch, InSQL and SuiteVoyager, one programming tool, one visualization tool, a database-manager and a web-portal for interaction over the Internet.</p>

APA, Harvard, Vancouver, ISO, and other styles

12

Tshemese, Nomzamo. "Design and PLC implementation of nonlinear PID cControllers for control of nonlinear processes." Thesis, Cape Peninsula University of Technology, 2014. http://hdl.handle.net/20.500.11838/1180.

Full text

Abstract:

Thesis submitted in fulfillment of the requirements for the degree Master of Technology: Electrical Engineering in the Faculty of Engineering at the Cape Peninsula University of Technology 2014<br>A new control strategy for control of the nonlinear process of Dissolved Oxygen (DO) concentration in the aerobic tank of wastewater treatment process is proposed. It provides means to improve the performance of the Linear Proportional Integration and Derivative (LPID) controller by extending it to a Nonlinear Proportional Integration and Derivative (NLPID) controller. The aim of the thesis is t

APA, Harvard, Vancouver, ISO, and other styles

13

Chavez, Alejandra, and Michael Duberg. "ERP Usage and its Impact on Firm Performance : A Quantitative Study of Swedish SMEs." Thesis, Stockholms universitet, Företagsekonomiska institutionen, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:su:diva-195137.

Full text

Abstract:

Purpose: In literature, there is not sufficient research of the impact of Enterprise Resource planning (ERP) usage on firm performance for small and medium sized Swedish companies. Therefore, the purpose of this paper is to provide clarifications regarding this topic by investigating two research questions: What factors drive ERP usage in small- and medium- sized Swedish enterprises? Does ERP usage affect Firm Performance in small- and medium- sized Swedish enterprises? Design/Methodology/Approach: To approach our research questions 10 hypotheses are constructed based on previous studies. Fur

APA, Harvard, Vancouver, ISO, and other styles

14

Nykrýn, Lukáš. "Implementation of NIS Backend for SSSD." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2013. http://www.nusl.cz/ntk/nusl-236214.

Full text

Abstract:

Tato práce se v první části zabývá představením technologií a nástrojů pro centrální správu a přihlašování uživatelů v GNU/Linux. Ukazuje využití adresářových služeb v síťové infrastruktuře, konkrétně služby NIS a její porovnání s dnes pravděpodobně nejrozšířenější adresářovou službou LDAP. Dále práce popisuje proces autentizace na klientských stanicích, konkrétně použití PAM a NSS a možné rozšíření celého systému zavedením cache díky démonu SSSD. Druhá část popisuje návrh a implementaci NIS provideru pro SSSD.

APA, Harvard, Vancouver, ISO, and other styles

15

Srinivasan, Rangakrishnan. "Design and implementation of a frequency synthesizer for an IEEE 802.15.4/Zigbee transceiver." Texas A&M University, 2003. http://hdl.handle.net/1969.1/5898.

Full text

Abstract:

The frequency synthesizer, which performs the main role of carrier generation for the down-conversion/up-conversion operations, is a key building block in radio transceiver front-ends. The design of a synthesizer for a 2.4 GHz IEEE 802.15.4/Zigbee transceiver forms the core of this work. This thesis provides a step-by-step procedure for the design of a frequency synthesizer in a transceiver environment, from the mapping of standard-specifications to its integrated circuit implementation in a CMOS technology. The results show that careful system level planning leads to high-performance realizat

APA, Harvard, Vancouver, ISO, and other styles

16

Qureshi, Abdul Raheem, and Haris Qazi. "Implementation of Low Power, Wide Range ADPLL for Video Applications." Thesis, Linköping University, Electronics System, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-59307.

Full text

Abstract:

<p>Phase locked loop (PLLs) are the keystone for the electronic as well as for the communication circuits. Without any exaggeration, PLLs are found almost in every electronic and communication devices. Countless research has been performed, for the modification and enhancement of the PLLs circuit. While, due to the numerous advantage of the digital circuitry, the recent research is focusing on the all digital implementation of the PLLs. Therefore, it was competitive to touch with burning research.</p><p>Low power and wide range all digital phase locked loop (ADPLL), for video applications is p

APA, Harvard, Vancouver, ISO, and other styles

17

Cheng, Kai-Chou, and 鄭凱州. "A Study of Competency Analysis on Implementation of PLM." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/94834684465178264824.

Full text

Abstract:

碩士<br>朝陽科技大學<br>工業工程與管理系碩士班<br>98<br>The frequent demands of update and renewal from the consumers have become a regular behavior on the market. All production industries have to face the challenge of the shortest time-to-market value with optimal quality satisfactions. A concept of product lifecycle management (PLM) were established due to the demands, for which will deal with the manipulation information and process of production, usage, and disposal of a product. By concisely connecting the workflows and the essence of the tasks, a product of high efficiency and high quality can be develope

APA, Harvard, Vancouver, ISO, and other styles

18

Liao, Shao-chia, and 廖紹嘉. "PLM Implementation Methodology: A Semiconductor Assembly Industry Case Study." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/26966035743142423508.

Full text

Abstract:

碩士<br>國立中山大學<br>資訊管理學系研究所<br>101<br>Today, many companies have implemented the Product Lifecycle Management (PLM) system to support their new product development activity and coordinate with other stakeholders and resources to increase their product development efficiency. However, the PLM implementation is very complex and challenging. Research has indicated that over 50 percent of the PLM implementation projects fail. A common problem encountered in adopting PLM packages is a lack of detailed guideline for implementing PLM required by the adopting organization. To alleviate the forgoing pro

APA, Harvard, Vancouver, ISO, and other styles

19

Kuo, Ming-Chou, and 郭銘洲. "A Study on Critical Success Factors of PLM Implementation." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/15704071981131208092.

Full text

Abstract:

碩士<br>靜宜大學<br>資訊碩士在職專班<br>98<br>Taiwan is playing a main role in the world on R&D and manufacturing now. As the industry style has changed from generation to generation, Taiwan has transformed from conventional manufacturing into hi-tech and IT industry. And the business model has changed from OEM to ODM, OBM. The new economic style not only emphasizes on technology, but to speed up products’ time to market, to improve R&D efficiency, to lower the operation cost, to accelerate globalization, to respond to customer’s demand quickly, and to constantly keep up competitiveness. PLM is a powerful t

APA, Harvard, Vancouver, ISO, and other styles

20

Lin, Chun-Yi, and 林琚儀. "The critical successful factors of PLM Implementation in Electronic manufacturing industry." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/u4mxz5.

Full text

Abstract:

碩士<br>國立臺北科技大學<br>工業工程與管理研究所<br>99<br>As we know, many companies use the PLM (Product Lifecycle Management) system. The PLM system can integrate the whole product life process like the initial plan, research & development, validation, producing, marketing, recycling and elimination. In addition, the PLM system may be applied to the link suppliers, clients, and other internal ERP systems, especially like the SCM (Supply Chain Management) system, the ERP (Enterprise Resource Planning) system, the CRM (Customer Relationship Management) system. Thereby the company can build well up a knowledge man

APA, Harvard, Vancouver, ISO, and other styles

21

HO, SHAO-CHE, and 何紹哲. "The Research on Implementation of IPDEs Based on PLM System：A Case Study." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/577m3a.

Full text

Abstract:

碩士<br>國立中央大學<br>工業管理研究所在職專班<br>102<br>The worldwide OBM industry's high profitability is also the goal for Taiwanese local OEM and ODM manufacturer. Hence, how to design the product within the shortest period of time which quality, functionality, and price can be all catered to the market's need becomes the major key to corporate's profitability. Product Data Management was rather effective in tracking product designing information in early stage. However, as supply chain globalizes as well as collaborative mode rises, PLM was nurtured and arose. PLM not only fulfills the global business envir

APA, Harvard, Vancouver, ISO, and other styles

22

Tsung, Pei-Tzu, and 叢沛滋. "The Implementation PLM of Semiconductor Assembly Industry – An Example of A Company." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/thg2k2.

Full text

Abstract:

碩士<br>國立中山大學<br>資訊管理學系研究所<br>96<br>As the consumption trend has shifted to personal uniqueness, the traditional mass production of a single product has already been replaced by a small amount of various production to match consumption pattern. To meet challenge imposed by the market, manufacturers must change tactics and methods in their R&D activities. Consumers have already taken the high-quality products or services for granted, hoping to obtain the desired products or services that as soon as possible. The manufacturer expects to push new products or services to the market earlier than

APA, Harvard, Vancouver, ISO, and other styles

23

Tsou, Yuan-Gan, and 鄒源淦. "Quality Function Deployment Implementation Based on Fuzzy Kano Model: An Application in PLM system." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/51583337925720756487.

Full text

Abstract:

博士<br>中華大學<br>科技管理學系(所)<br>96<br>Product Lifecycle Management (PLM), a strategic business system allows more effective communication among different groups at dispersed locations to share ideas and access information needed for developing new products and executing innovative processes. The main function of PLM is to develop an attractive system which ensures customer satisfaction. Therefore, one of the important topics of the PLM system developments is to take customer requirements into consideration. Quality function deployment (QFD) has been widely used for numerous years; it is one of the

APA, Harvard, Vancouver, ISO, and other styles

24

Kuo, Yi-Cherng, and 郭怡成. "A Study of Critical Success Factors on the Implementation of PLM System in Manufacturing Industry." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/28509861289078300295.

Full text

Abstract:

碩士<br>國立高雄第一科技大學<br>資訊管理所<br>94<br>ABSTRACT This study will discover the successful factors of implementing Product Lifecycle Management (PLM) system in manufacturing industry. We adopt deep interviews with candidates and collect data from five companies in manufacturing industry, including one semiconductor company, two LCD companies, one electronics assembly company, and one aerospace industrial company. There are 13 interviewees distributing in the candidates employees setup PLM system, system providers, and implementing consultants. The literature review in this study includes PLM solution

APA, Harvard, Vancouver, ISO, and other styles

25

Ming, X. G., and Wen Feng Lu. "A Framework of Implementation of Collaborative Product Service in Virtual Enterprise." 2003. http://hdl.handle.net/1721.1/3740.

Full text

Abstract:

To satisfy new market requirements, manufacturing industry has shifted from mass production that takes advantage of the scale of production, to quality management that optimizes the internal enterprise functions, to e-manufacturing era that leverage intellectual capital via collaborative innovation. In the same time, the product itself is becoming the most important asset for sustainable business success. Consequently, the effectiveness, efficiency and innovation for the development of the product across the whole product lifecycle are becoming key business factors for manufacturing enterprise

APA, Harvard, Vancouver, ISO, and other styles

26

Li, Yung-hsi, and 黎雍璽. "A Study of success key factor in PLM system implementation-A case study of S technology Inc." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/79011764890179747353.

Full text

Abstract:

碩士<br>國立中央大學<br>企業管理學系碩士在職專班<br>99<br>ABSTRACT This research focuses on not only the conflicts during old and new system processes transfer, which is brought up by DeLone & McLean (1992, 2003), but also the changes of product development procedures and the benefits it brings up. The product is the backbone of PLM, which integrates people, processes and product information as well. PLM consists of it conception, through design and manufacture, to EOL (End of Life). The introduction of the old system encounters too many problems to make the schedule on time; however, the new PLM does improve it.

APA, Harvard, Vancouver, ISO, and other styles

27

CHEN, CHUN-JUNG, and 陳俊融. "The Research of PLM System Implementation In Liquid Crystal Display Module Industry:“T Company” as an Example." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/jq3mr3.

Full text

Abstract:

碩士<br>逢甲大學<br>經營管理碩士在職專班<br>100<br>Product Lifecycle Management(PLM) System enables a corporation to record all important technical data throughout the lifecycle of a product and makes it traceable. In this thesis, the PLM system of a Liquid-Crystal Display Module manufacturer(T-Company) is analyzed and implemented, the required internal procedures as well as the external environment of the industry technical data management and reuse of data were also analyzed and summarized. The research discovered that the efficiency of documentation processing and collaborative design process in product de

APA, Harvard, Vancouver, ISO, and other styles

28

Lee, Hung-Ta, and 李宏達. "A Study of Critical Success Factors on the Implementation Plan of PLM System- Case Study for A Company." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/9e2787.

Full text

Abstract:

碩士<br>國立臺灣大學<br>資訊管理學研究所<br>102<br>With consumer demand changing, product life cycle reducing, business compliance coming to be serious, the products OEM/ODM manufacturers of Taiwan information manufacturing industry are facing lots challenges. The first one challenge is severe price competition at home and abroad, and second one is they have to take multiple regional R&;D and factory management pressure. These two driven them to improve the management of product cycle, improve the efficiency to overcome the challenge. And all this make the PLM system become more and more important to the comp

APA, Harvard, Vancouver, ISO, and other styles

29

Ching, Fang Lung, and 方隆慶. "A study of PLM system development and implementation based on CMⅡ standard - An example of motorcycle industry in Taiwan." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/p8th58.

Full text

Abstract:

博士<br>國立高雄應用科技大學<br>電子工程系碩士班<br>102<br>In today's competitive marketplace, improving the management of engineering changes in new product development can reduce enterprise costs, shorten development times, and improve product quality. Managing engineering change has always been hard in product life cycle management, and is a regular source of inefficiency and irritation for manufacturers. Over the years, many companies have focused on improving the efficiency of change management. Recently, there has been a shift in perspective on change management. Companies now recognize that better change p

APA, Harvard, Vancouver, ISO, and other styles

30

Liu, Min-Kuan, and 劉旻冠. "The Research of PLM System Implementation with Industry 4.0 Concept in TFT/LCD Industry –“H Company” as an Example." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/8tzc4x.

Full text

Abstract:

碩士<br>國立交通大學<br>管理學院資訊管理學程<br>107<br>With IT enable high automation supported by smart manufacturing, the business model of the company can be continuously innovated, and the value capability of the products is continuously improved. The fierce market competition requires company to achieve reduce R&D, manufacture cycletime and cost of products. In addition to manufacturing process control, companies are required to be faster launch products (Time to market). After the concept of “Industry 4.0” (Fourth Industrial Revolution) was introduced in Germany in 2013, companies began to examine their o

APA, Harvard, Vancouver, ISO, and other styles

31

廖柏侖. "Knowledge management in R&D division under the implementation of PLM system: The case of Taiwanese high-tech companies." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/03698946746162777363.

Full text

Abstract:

碩士<br>國立政治大學<br>科技管理研究所<br>97<br>Taiwanese high-tech industry has been emphasized the value of R&D innovation since 2000 in order to survive under the strong competition in globalization environment. The capability of innovation and efficiency of product development have been on the highly priority of companies. Hence, Taiwanese companies implement the product lifecycle management (PLM) system to improve product development schedule. Knowledge is an important intangible asset for companies in the 21th century. Because of PLM system, companies could manage R&D knowledge through collecting and l

APA, Harvard, Vancouver, ISO, and other styles

32

Tsai, Ben, and 蔡本源. "Analysis of the impacts for RD workflow management capability on the implementation of PLM — An empirical study on Hi-Tech Electronics Company." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/35809868128381737007.

Full text

Abstract:

碩士<br>國立政治大學<br>經營管理碩士學程<br>95<br>Taiwan’s economic development track shows that the country in the past 50 years bolstered its national income, and gradually becoming one of the developed countries in the world. And now, Taiwan’s once competitive labor is replaced by cheap labor in Southeast Asia and China. This prompted Taiwanese companies to switch to high tech and high value added industries. In their attempt to maintain its competitive edge in world market, Taiwan electronics and IT companies escalated their research and development ability on enterprise products. Creating values through

APA, Harvard, Vancouver, ISO, and other styles

33

RUI, GI-ZHONG, and 芮奇中. "Computer-aided PLA design and implementation." Thesis, 1986. http://ndltd.ncl.edu.tw/handle/23883216170805918843.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Po-Hwa, Yang, and 楊柏華. "The Design and Implementation of PLL." Thesis, 2005. http://ndltd.ncl.edu.tw/handle/98292339981450461969.

Full text

Abstract:

碩士<br>國立臺灣科技大學<br>電子工程系<br>93<br>In recent years, promote and progress continuously on the integrated circuit manufacturing process technique along with the CMOS, relatively also in addition to more precisely in manufacturing, make high electric circuit of made more extensive in applying.And this is particularly more obvious in lead-in corresponding by letter the system.The most important in high electric circuit of the module of more difficult design for a frequency to match to become useful This text is to aim at first at the present time lately announce the frequency to synthesize the mach

APA, Harvard, Vancouver, ISO, and other styles

35

KE, YUEH-HUNG, and 柯岳宏. "Palm Vein Recognition System and FPGA Implementation." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/fqcqn7.

Full text

Abstract:

碩士<br>國立中正大學<br>電機工程研究所<br>106<br>Entering passwords is a Conventional authentication way. Recently, the use of biometrics has been widely used. The use of human biometrics for authentication reduces the risk of misappropriation of passwords and avoids the possibility of forgetting or losing passwords. Palm vein identification is a recognition technology, it is not easy to be stolen and have high acceptance. In this paper, a palm vein identification system is implemented, using CASIA palm vein imaging database set up by the Institute of Automation, Chinese Academy of Sciences to identify t

APA, Harvard, Vancouver, ISO, and other styles

36

Wang, Ying-Fu, and 王盈富. "Implementation of Siemens PLC E-Learning Platform." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/83446841655446786732.

Full text

Abstract:

碩士<br>吳鳳科技大學<br>應用數位媒體研究所<br>101<br>Programmable Logic Controllers (PLCs), digital equipment with microprocessor, have long been widely used in the field of industrial automation. Unlike the hardware wiring of conventional relay control, the propgraming of PLCs can be designed through the software. Therefore, PLCs have play an important role in the industrial automation due to the advantages of convenience and flexibility. As a result, PLC related courses have been essential courses in the vocational education. To increase learning interests and foster practical skills, many educators design a

APA, Harvard, Vancouver, ISO, and other styles

37

Dehng, Guang-Kaai, and 鄧光鎧. "Implementation and Application of CMOS DLL/PLL." Thesis, 2001. http://ndltd.ncl.edu.tw/handle/99612123418528035964.

Full text

Abstract:

博士<br>國立臺灣大學<br>電機工程學研究所<br>89<br>The rapid and continuous advances of CMOS processes over the past twenty years have led to a highly-integrated level and a fast operation speed in electronic systems. Meanwhile, the issue of synchronization associated with these systems arises and it is often dealt with by delay-locked loops (DLLs) and phase-locked loops (PLLs). This thesis is mainly dedicated to the implementation and application of CMOS DLLs and PLLs. In chapter 2, a novel DLL (NDLL) is presented. It adopts a proposed nested topology, which is different from the conventional one.

APA, Harvard, Vancouver, ISO, and other styles

38

陳俊興. "An Implementation of Applying Distributed System with PLC." Thesis, 2002. http://ndltd.ncl.edu.tw/handle/47376047003661113847.

Full text

Abstract:

碩士<br>國立海洋大學<br>系統工程暨造船學系<br>90<br>PLC ( Programmable Logic Controller ) is a critical role for the automatic-producing system of factories。 It is not only a control center of productive equipment，but also the command center of producing process。As the quickly development of higher-band network technology， the relationship between automatic equipment of factories and internet be come more important。 For the reason of improving the high cost 、low integration and difficult to expand equipment of traditional graphic-monitor system，Therefore，design a complete graphic-monitor system by Visual Bas

APA, Harvard, Vancouver, ISO, and other styles

39

Chen, Wei-Ting, and 陳韋廷. "Design and Implementation of Palm Vein Recognition System." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/50358815432843370656.

Full text

Abstract:

碩士<br>國立中正大學<br>電機工程研究所<br>103<br>With the popularity of credit cards and other payment tools, the recognition system need to memory password, it still inconvenient. The PIN (Personal Identification Number) recognition usually losses because the negligence. Personal Identification in safety is more important. Thus, discarding the annoying password and establishing the uniqueness of identity, return to the “biometric recognition system” which based on the human features have been a new trend. Palm vein is not easy to steal, low repetition rate, easy to use. We use this properties to design a “p

APA, Harvard, Vancouver, ISO, and other styles

40

Ma, Chun-Chiang, and 馬春強. "Implementation of PLC Graphical User Interface its Applications." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/26896113262440583343.

Full text

Abstract:

碩士<br>建國科技大學<br>電機工程所<br>102<br>This presents a traditional programmable logic controller (PLC) to control hardware, and using Visual Basic 6.0 development SCADA application software, to construct a prototype of a graphical control software, graphical control software as the future development purposes. Control system in accordance with the functional diagram is divided into two "Software Engineering" and "Hardware Engineering." This thesis completed SCADA software engineering research and development program, PLC communication modules to build a computer connection. Implement system using cur

APA, Harvard, Vancouver, ISO, and other styles

41

Chien, Hung-Hsuan, and 簡宏軒. "Implementation of PLC Control Servo Motor Using dsPIC30F4011." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/kmra4j.

Full text

Abstract:

碩士<br>國立虎尾科技大學<br>電機工程研究所<br>102<br>My thesis implements the control of PLC servo motor positioning with a dsPIC30F4011 single chip. This system is different from the traditional PLC control servo motor which requires Axis Control Card and Servo Driver. In addition, it can integrate with controllers which were made from different manufactories. The servo control system that was mentioned above uses voltage space vector modulation technology which is installed in a three-phase inverter with six power switch and controls positioning by space vector table method with six-step square wave to achie

APA, Harvard, Vancouver, ISO, and other styles

42

Chung, Kun-Lin, and 鍾坤霖. "Implementation of 802.16d-PKM Protocol On MPC8347 Board." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/76891059243359579671.

Full text

Abstract:

碩士<br>國立中興大學<br>電機工程學系所<br>95<br>WiMAX[14] is a new and developing wireless communication technology, also known as IEEE802.16x standard. This technology is used in many areas such as delivering the last mile wireless broadband connection, hotsp-ots, and provides the high-speed connection for the businesses purpose. T-he concept of WiMAX is similar to WiFi, but WiMAX improved the functions - the maximum connectivity speed is 75Mbps and the maximum co-nnectivity distance could be 50 kilometers. It is an important technology t-hat can achieve long distance connectivity and amend the drawback of

APA, Harvard, Vancouver, ISO, and other styles

43

Chang, Chia-Yang, and 張佳陽. "Chip Implementation of PLL-based Frequency Synthesizer and Applications." Thesis, 2003. http://ndltd.ncl.edu.tw/handle/17999296075006594608.

Full text

Abstract:

碩士<br>淡江大學<br>電機工程學系碩士在職專班<br>91<br>A phase-locked loop (PLL) circuit is a modern interesting electronic building widely usage in electronics, especially in many integrated applications such as communications, frequency synthesis, clock recovery, clock generation. The thesis which divided into four parts is to use standard CMOS processes to implement and the frequency synthesizer and clock recovery based-on PLL: First, in chapter 1, the basic theory of PLL-based frequency synthesizer and system behavior simulation with MATLAB is introduced.Second, In chapter 2, a 3~20MHz CMOS Charge-pump PLL w

APA, Harvard, Vancouver, ISO, and other styles

44

Chang, Huang-Hui, та 張煌輝. "An Implementation of VCO & PLL by 0.18μm process". Thesis, 2012. http://ndltd.ncl.edu.tw/handle/21719978554773551559.

Full text

Abstract:

碩士<br>崑山科技大學<br>電子工程研究所<br>100<br>In this thesis, the VHF and UHF bands oscillator which mainly composed of four cascaded differential double delay ring oscillator. The VCO (Voltage-Controlled Oscillator) is also applied on PLL. The VCO with high tuning range, and low phase noise, Their output frequency will be 3372 MHz, 2272 MHz under 0.9 volts and 1.8 volts respectively. We integrate voltage controlled oscillator and phase frequency detector, charge pump, low-pass filter, and frequency divider to implement a PLL (Phase-Locked Loop) circuit. The VCO circuits are simulated and verified by H-Sp

APA, Harvard, Vancouver, ISO, and other styles

45

Min-HanTsai and 蔡旻翰. "Design and Implementation of a Narrow-band PLC System." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/yamx5e.

Full text

Abstract:

碩士<br>國立成功大學<br>電腦與通信工程研究所<br>104<br>This thesis follows the G3-PLC standard to implement a narrow-band power line communication (PLC) system. The system adopts orthogonal frequency division multiplexing (OFDM) and differential phase shift keying (DPSK) modulation as the main communication techniques. This work contains system simulations and system implementation. In the system simulations, a complete power-line channel model is involved to verify the feasibility and performance of the designed transmission/receiving algorithms. According to the simulation results, we propose some methods to

APA, Harvard, Vancouver, ISO, and other styles

46

Patrick, Danks Nicholas, and 尼克. "A First Glimpse of Predictive PLS: Implementation, Simulation, Visualization." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/4n8er5.

Full text

Abstract:

碩士<br>國立清華大學<br>國際專業管理碩士班<br>104<br>Although previous studies have offered procedures to perform predictive analytics on PLS path models, there are no guidelines for practitioners on what good or bad predictive characteristics are, what kinds of PLS models might benefit from predictive analysis, and how predictive characteristics of PLS models should be displayed and reported in publications. We seek to rectify this gap in academic practice by systematically analyzing the predictive performance of simulated PLS models with varying measurement and structural properties, and by visually examinin

APA, Harvard, Vancouver, ISO, and other styles

47

Wen, Cheng-lun, та 溫政倫. "FPGA Implementation of ΔΣ Modulators in Fractional-N PLL". Thesis, 2010. http://ndltd.ncl.edu.tw/handle/29235907026820955180.

Full text

Abstract:

碩士<br>國立臺灣科技大學<br>電子工程系<br>98<br>Fractional-N synthesizers have many advantages over their conventional counterparts, integer N synthesizers. These include, among others, high frequency resolution, fast channel switching speed, low in-band phase noise, less stringent phase noise requirement on the external VCOs, permitting direct digital modulation. One way of achieving non-integer multiplication of the reference frequency is through switching the division ration of the divider among different integers so that the “average” divider output cycle seen by the phase frequency detector is a non-int

APA, Harvard, Vancouver, ISO, and other styles

48

Chang, Che-wei, and 張哲維. "Parameters Estimation and Power Converter Implementation of PEM Fuel Cells." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/13694428082784206250.

Full text

Abstract:

碩士<br>聖約翰科技大學<br>電機工程系碩士班<br>97<br>This thesis presents two equivalent circuit parameters estimation methods and a power converter for proton exchange membrane fuel cell (PEMFC). The PEMFC system, which is a multi-input multi-output electrochemical system, can be tested or evaluated by estimating its equivalent circuit parameters, which have real importance in the manufacturing, exploitation, and maintenance phase. The proposed equivalent circuit parameters estimation methods contain current switching method and periodic current switching method. Current switching method switches the load curr

APA, Harvard, Vancouver, ISO, and other styles

49

Chen, Yu-Ming, and 陳鈺明. "Design and Implementation of PFM Boost Converterfor White LED Driver." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/r2ttb3.

Full text

Abstract:

碩士<br>國立虎尾科技大學<br>電機工程研究所<br>100<br>In this thesis, we proposed a DC-DC boost converter with high stability, which can be used in the power supply system of LED, such as : EDR,GPS, PDAs, digital speed meter and other electronic displays. The current limit PFM controller has been used in this thesis , and the diode has been replaced by MOSFET, The input voltage and output voltage of this DC-DC boost converter is 1.5v and 3.5v,and it is composed of Hysteresis comparator , current sensing, off-time controller , error amplifier , gate driver , bandgap reference circuit and digital logic control

APA, Harvard, Vancouver, ISO, and other styles

50

Wu, Han-Jun, and 吳漢鈞. "Design and Implementation of PFM Buck Converter for Portable Device." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/m6vnd5.

Full text

Abstract:

碩士<br>國立虎尾科技大學<br>電機工程研究所<br>100<br>This thesis proposed a DC/DC buck converter, which can be used in the portable electronic system, such as: CPU, micro processor and digital signal processor. The main circuit is composed of Bandgap, Hysteresis comparator, current sensing circuit, off-time controller generator, error amplifier, digital logic control circuit and zero current detector. The current limit PFM controller has been used in this thesis, and the diode has been replaced by MOSFET, that can decrease the power consumption efficiently. Portable supply voltage is 3.3V or 5V.The microproc

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!