Log in

Relevant bibliographies by topics / Plywood Manufacturing Plant Report

Contents

Journal articles
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Plywood Manufacturing Plant Report'

Author: Grafiati

Published: 5 June 2025

Last updated: 1 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Plywood Manufacturing Plant Report.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Plywood Manufacturing Plant Report"

1

Solanki, Riya Tudu, S. C. Sahoo, and Akash Anand Solanki. "Copperized Karanj Seed (Pongamia pinnata) Oil as an Alternative to Chemical Preservative in Plywood Manufacturing." Asian Journal of Biology 20, no. 7 (2024): 43–49. http://dx.doi.org/10.9734/ajob/2024/v20i7422.

Full text

Abstract:

Most chemicals used in wood preservation are toxic to the environment. Use of synthetic preservatives are highly prevalent in plywood manufacture. Wood, which is the basic raw material for plywood manufacture, being ligno-cellulosic material is liable to degradation due to microbiological organisms and other biological wood destroying organisms causing significant loss. Therefore, it is necessary to develop an alternate naturally available preservative which will be effective for plywood manufacture. Karanj or Pongamia pinnata is known for its anti-fungal and pesticide properties that make it

APA, Harvard, Vancouver, ISO, and other styles

2

Luppold, William G. "Material-Use Trends in U.S. Furniture Manufacturing." Southern Journal of Applied Forestry 12, no. 2 (1988): 102–7. http://dx.doi.org/10.1093/sjaf/12.2.102.

Full text

Abstract:

Abstract Furniture manufacturers in the United States are major users of a variety of wood products. In the last two decades, traditional wood products, such as hardwood lumber, veneer, and plywood have been, in part, replaced by composite panel products, such as particleboard, hardboard, and medium-density fiberboard. This paper examines the uses of traditional and composite wood products by the wood household, upholstered household, and commercial furniture industries in descriptive and numerical terms. The analysis indicates that the substitution of composite products for traditional hardwo

APA, Harvard, Vancouver, ISO, and other styles

3

Li, Qi, Yanfang Pang, Xiaosheng Liu, Enhua Xi, An Mao, and Hui Wan. "Addition of Polyurethane Foam Waste to Polymeric Diphenyl Methane Diisocyanate to Improve Plywood Binder Performance." Forest Products Journal 70, no. 3 (2020): 262–67. http://dx.doi.org/10.13073/fpj-d-19-00062.

Full text

Abstract:

Abstract The objective of this study was to investigate the feasibility of using polyurethane (PU) foam waste obtained from automobile shredder residue (ASR) in plywood production. The PU foam waste from ASR was cleaned by water and acetone, ground into powder, dried, and mixed with polymeric diphenyl methane diisocyanate (pMDI) resin at various ratios (2.5%, 5%, 7.5%, and 10%, based on the weight of pMDI). The mixed adhesives were examined with Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric (TG) analysis, and evaluated as plywood binders (measured in accordance with Chin

APA, Harvard, Vancouver, ISO, and other styles

4

HUANG, LULU. "TRAINING AND DEVELOPMENT OF EMPLOYEES IN A PLYWOOD MANUFACTURING PLANT IN MINDANAO." International Journal For Research In Social Science And Humanities 8, no. 11 (2022): 1–8. http://dx.doi.org/10.53555/ssh.v8i11.2150.

Full text

Abstract:

Staff training and development has been identified by various scholars to be very crucial to an organization. Organization are therefore encouraged to train and develop their staff in order to enhance their performance. The product department is among the organizations which provide training and develop their staff to ensure that their staff has the request knowledge and skills, to meet the challenges. While the organization is keeping on training their staff, it is necessary to assess the outcome of these training. The study assessed the training and development process and see whether has im

APA, Harvard, Vancouver, ISO, and other styles

5

Doosthoseini, Kazem, and Hamid Zarea-Hosseinabadi. "Using Na+MMT nanoclay as a secondary filler in plywood manufacturing." Journal of the Indian Academy of Wood Science 7, no. 1-2 (2010): 58–64. http://dx.doi.org/10.1007/s13196-011-0012-9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Anderson, Roy C., and Eric N. Hansen. "Determining Consumer Preferences for Ecolabeled Forest Products: An Experimental Approach." Journal of Forestry 102, no. 4 (2004): 28–32. http://dx.doi.org/10.1093/jof/102.4.28.

Full text

Abstract:

Abstract Numerous studies have measured consumers' attitudes about forest products that are certified to have come from well-managed forests. Here we report an experiment that measured actual consumer behavior. During the experiment, conducted at two Home Depot stores in Oregon, consumers were offered a choice between virtually identical “ecolabeled” and unlabeled plywood products. Data were collected by tracking the amount sold of each type. The presence of the label was associated with increased sales when the two products were offered for the same price, but when the certified plywood was p

APA, Harvard, Vancouver, ISO, and other styles

7

King, Stephen A., and David K. Lewis. "A Survey of the Preservative Treated Wood Market in Oklahoma." Southern Journal of Applied Forestry 24, no. 2 (2000): 70–76. http://dx.doi.org/10.1093/sjaf/24.2.70.

Full text

Abstract:

Abstract Retail lumberyards in Oklahoma were surveyed concerning their trade in treated wood products. Results indicate that an estimated producer price value of $39.3 million of treated dimension lumber, landscape timbers, fenceposts, poles, and plywood were sold by retail lumberyards in Oklahoma during 1996. Retail lumberyard managers report that farmers and ranchers are the most important consumer segment for treated wood product sales. Retailers also report that straightness, general appearance, and preservative retention level are the most important attributes that consumers desire in pre

APA, Harvard, Vancouver, ISO, and other styles

8

Suresh Kumar Sahani, Sai Kiran Oruganti, K. Satish Kumar, and Santosh Kumar Karna. "Reliability Assessment of a Plywood Production Facility Utilizing Laplace Transform and Runge-Kutta Fourth-Order Differential Equations: Overview of Industrial Plant." Metallurgical and Materials Engineering 31, no. 4 (2025): 417–23. https://doi.org/10.63278/1453.

Full text

Abstract:

This research offers a thorough reliability analysis of essential machinery in a plywood production facility, employing the Laplace Transform for analytical solutions and the fourth-order Runge-Kutta (RK4) technique for numerical analysis. The study formulates a mathematical model to forecast failure rates and system dependability over time, substantiated by comparing data displayed in tables and graphical representations. The integrated method offers both precise and computationally efficient solutions for reliability optimization in industrial environments i.e. This study conducts a thorough

APA, Harvard, Vancouver, ISO, and other styles

9

Keegan III, Charles E., Daniel P. Wichman, Gerald E. Evans, and Roger D. Fight. "Employment- and Wage-Consumption Ratios for Montana's Forest Products Manufacturers." Western Journal of Applied Forestry 8, no. 2 (1993): 54–57. http://dx.doi.org/10.1093/wjaf/8.2.54.

Full text

Abstract:

Abstract This article presents information on employment and payroll generated per unit volume of timber or wood fiber processed by the various manufacturing sectors of Montana's forest products industry for 1987-1989. Average employment ranged from a high of 117 workers per million cubic feet (mmcf) of wood fiber processed at house log plants, to a low of 12 workers per mmcf at stud mills. Employment-consumption ratios for cedar products plants and producers of utility poles and posts and small poles were 48, 47, and 34 workers per mmcf respectively. At sawmills, employment-consumption ratios

APA, Harvard, Vancouver, ISO, and other styles

10

Li, Qi, Xiaosheng Liu, Huidong Su, An Mao, and Hui Wan. "Development of a Renewable Hybrid Resin System by Blending Isocyanate with Novolac Phenolic Resins." Forest Products Journal 70, no. 3 (2020): 268–74. http://dx.doi.org/10.13073/fpj-d-20-00022.

Full text

Abstract:

Abstract The objective of this study was to develop a performance-competitive bio-based hybrid resin system composed of methylene diphenyl diisocyanate (MDI) resin and novolac phenol-formaldehyde (PF) resin for engineered wood panel manufacturing. A novolac PF resin and a bio-oil–modified PF resin were blended with MDI at weight ratios of PF to MDI of 85:15, 75:25, 50:50, and 25:75, respectively. The obtained hybrid resins were examined with Fourier-transform infrared (FTIR) spectroscopy and thermogravimetric analysis (TGA), and evaluated as plywood binders. The results indicated that the gel

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Plywood Manufacturing Plant Report"

1

Associates, Harbour and, ed. Harbour report 1998 North America: [manufacturing analysis company by company, plant by plant]. Harbour and Associates, 1998.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

(Firm), American Standard, Ontario. Ministry of Environment and Energy., and CH2M Hill Engineering Limited, eds. Reuse of clay and ceramic glaze at a bathroom fixture manufacturing plant: Report. Ontario, Ministry of Environment and Energy, 1994.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Drinkwater, Theodore J. Environmental and safety considerations at a paint manufacturing plant: An environmental studies intern report. Huxley College of Environmental Studies, Western Washington University, 1995.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

American Apparel Manufacturers Association. Technical Advisory Committee. The changing apparel plant: Responding to the new realities of manufacturing : 1993 report of the Technical Advisory Committee, American Apparel Manufacturers Association. American Apparel Manufactures Assoc., 1993.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Plywood Plant Glue Wastes Disposal Progress Report. BiblioGov, 2013.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Parker, Philip M. The 2007 Report on Manufacturing Veneer, Plywood, and Engineered Wood Products: World Market Segmentation by City. ICON Group International, Inc., 2006.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Emission testing at a structural brick manufacturing plant: Final emission test report for testing at Belden Brick Company Plant 6, Sugarcreek, OH, November 8 to 12, 1993. U.S. Environmental Protection Agency, Office of Air and Radiation, Office of Air Quality Planning and Standards, 2001.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Plywood Manufacturing Plant Report"

1

Pugazhendhi, Aarthi. "PROSPECTS OF ALOE VERA IN FMCG PRODUCTS." In Futuristic Trends in Biotechnology Volume 3 Book 6. Iterative International Publishers, Selfypage Developers Pvt Ltd, 2024. http://dx.doi.org/10.58532/v3bjbt6p2ch1.

Full text

Abstract:

This report explores the prospects of incorporating Aloe vera in FMCG products.Aloe vera, a plant renowned for its therapeutic and cosmetic advantages, has experienced a surge in popularity within the FMCG sector. With increasing awareness, customers are seeking natural and herbal options for their skincare and personal care products. The antimicrobial qualities and skin-soothing and nourishing abilities of aloe vera present a significant prospect for FMCG companies.The antibacterial characteristics of aloe vera make it a significant component in skincare and personal care products. It possess

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Plywood Manufacturing Plant Report"

1

Buksans, Edgars, and Ilze Kalnina. "Influence of different veneer soaking technological factors on reaction to fire performance of birch plywood." In 24th International Scientific Conference Engineering for Rural Development. Latvia University of Life Sciences and Technologies, Faculty of Engineering and Information Technologies, 2025. https://doi.org/10.22616/erdev.2025.24.tf055.

Full text

Abstract:

A study of the influence of different technological factors on the reaction to fire performance of birch plywood made by the veneer soaking method was conducted and reported in this research paper. Technological parameters like the fire-retardant salt concentration level, temperature and soaking time were investigated to find the best technological parameters for manufacturing fire-retardant birch plywood. The aim of this work is to find the optimal technological parameters for manufacturing fire retardant birch plywood with the best possible reaction to fire class B-s1,d0 for wood-based produ

APA, Harvard, Vancouver, ISO, and other styles

2

Imano, Shinya, Naoya Sato, and Hironori Kamoshida. "Development and Trial Manufacturing of Ni-Base Alloys for Coal Fired Power Plant with Temperature Capability 800°C." In AM-EPRI 2013, edited by D. Gandy and J. Shingledecker. ASM International, 2013. http://dx.doi.org/10.31399/asm.cp.am-epri-2013p0202.

Full text

Abstract:

Abstract Large scale components of the conventional 600°C class steam turbine were made of the ferritic steel, but the steam turbine plants with main steam temperatures of 700°C or above (A-USC) using the Ni-base superalloys are now being developed in order to further improve the thermal efficiency. The weight of the turbine rotor for the A-USC exceeds 10ton. A lot of high strength superalloys for aircraft engines or industrial gas turbines have been developed up to now. But it is difficult to manufacture the large-scale parts for the steam turbine plants using these conventional high strength

APA, Harvard, Vancouver, ISO, and other styles

3

Shiokawa, T. "Application of HIP-NNS to Large Complex Products Using Super Duplex Stainless Steel Powder." In Hot Isostatic Pressing. Materials Research Forum LLC, 2023. http://dx.doi.org/10.21741/9781644902837-6.

Full text

Abstract:

Abstract. In recent years, the productivity of offshore plants has been improved and the field of production from shallow water to deep sea has been expanded. Along with this, it is required that the plant equipment be upsized and maintenance-free. The conventional manufacturing method for duplex stainless steel parts such as valves for plant equipment was mainly forging. There is a problem though, it is difficult to obtain homogeneity with the physical characteristics. One solution to this problem is powder sintering using HIPed near net-shaped (HIP-NNS) products. However, near-net manufactur

APA, Harvard, Vancouver, ISO, and other styles

4

Kolb, Gregory J., Roger Davenport, David Gorman, Ron Lumia, Robert Thomas, and Matthew Donnelly. "Heliostat Cost Reduction." In ASME 2007 Energy Sustainability Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/es2007-36217.

Full text

Abstract:

Power towers are capable of producing solar-generated electricity and hydrogen on a large scale. Heliostats are the most important cost element of a solar power tower plant. Since they constitute ∼50% to the capital cost of the plant it is important to reduce the cost of heliostats to as low as possible to improve the economic viability of power towers. In this study we evaluate current heliostat technology and estimate a price of $126/m2 given year 2006 materials and labor costs. We also propose R&D that should ultimately lead to a price of less than $100/m2. Approximately 30 heliostat an

APA, Harvard, Vancouver, ISO, and other styles

5

Rassamakin, Boris, Michael Ducheiko, Nikolay Bayskov, et al. "Experince in creating nanosatellites of the "cubesat" "PolyITAN" standard in Igor Sikorsky Kyiv Polytechnic Institute: mission, development and exploitation results." In 11th International Conference on Electronics, Communications and Computing. Technical University of Moldova, 2022. http://dx.doi.org/10.52326/ic-ecco.2021/el.04.

Full text

Abstract:

This article gives general information about the goals, requirements of missions and describe show these requirements are expressed in the development of nanosatellites (NS) of the PolyITAN series of CubeSat standard. The report also discusses the integration of electronics with the design and payload, provides information on the applied manufacturing methods and tests of NS of various modifications for performing tasks in orbit. The analysis of the results of flight tests of the NS (PolyITAN-1 and PolyITAN-2) and potential capabilities of the developed NS "PolyITAN-3" (assessment of the quali

APA, Harvard, Vancouver, ISO, and other styles

6

Escobar, Rodrigo, and Teresita Larrai´n. "Net Energy Analysis for Concentrated Solar Power Plants in Chile." In ASME 2008 International Mechanical Engineering Congress and Exposition. ASMEDC, 2008. http://dx.doi.org/10.1115/imece2008-67481.

Full text

Abstract:

The Chilean Energy Policy calls for 15 percent of new power generation capacity to come from renewable energy sources from 2006 to 2010, and then a 5% of electric energy generated from renewable energy sources with gradual increases in order to reach 10% by 2024. Concentrated solar power is an interesting alternative to help achieving those objectives, as it is estimated that northern Chile has high radiation levels, coupled with high values of the local clearness index and availability of flat terrain. The present report investigates the net energy attributes of parabolic trough plants instal

APA, Harvard, Vancouver, ISO, and other styles

7

Tominaga, Kazuo, Sohei Fukui, Motoi Tanaka, Tomoharu Hashimoto, and Ryuichi Tayama. "Development of New Organic Iodine Filter for FCVS." In 2020 International Conference on Nuclear Engineering collocated with the ASME 2020 Power Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/icone2020-16416.

Full text

Abstract:

Abstract All of the boiling water reactors in Japan were required to install filtered containment venting system (FCVS) for restart after the accident of Fukushima Daiichi Nuclear Power Plant. FCVS is composed of alkaline water and a metal fiber filter (MFF). Alkaline water has the function of reducing aerosol and inorganic iodine (I2). MFF is constituted for the purpose of removing the aerosol which was not able to be removed with alkaline water. With the above system, the released aerosol can be removed with DF1000 and inorganic iodine DF100. On the other hand, organic iodine that cannot be

APA, Harvard, Vancouver, ISO, and other styles

8

Schmidt, Karl, and Jack Little. "Development of Microwave Interferometry Nondestructive Testing Solution for Complex Materials." In ASME 2011 Pressure Vessels and Piping Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/pvp2011-57965.

Full text

Abstract:

Application of engineered ceramic materials in high temperature environments of advanced propulsion systems in high performance aircraft; structural demands in ceramic-composite armor; application of high density polyethylene in piping, and reinforced rubber in nuclear power service; and fiber reinforced resin overwraps for piping, all present demanding nondestructive testing challenges. A new technology, Evisive Scan™, has been recently developed that allows condition monitoring in these challenging materials. The internationally patented Evisive Scan™ method is based on microwave interferome

APA, Harvard, Vancouver, ISO, and other styles

9

Rieg, Claude, Ralf Ahlstrand, Michel Bieth, et al. "Neutron Embrittlement of VVER 1000 and 440/213 RPVs: Learning From EC Projects on RPV Integrity." In ASME/JSME 2004 Pressure Vessels and Piping Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/pvp2004-2970.

Full text

Abstract:

Since 1991 the European Commission has financed a significant number of Technical Assistance Projects to the Commonwealth of Independent States (TACIS) and EURATOM R&D actions addressing the main safety issues on RPV material embrittlement and integrity assessment. Since the VVER 440 reactors of the reference series 213 are made from recognised neutron embrittlement resistant materials and include comprehensive surveillance programmes, a standard plant life management procedure can be applied to address long-term concerns, mostly aiming at reducing uncertainties in the assessment technique

APA, Harvard, Vancouver, ISO, and other styles

10

Kovesdi, Casey. "Revisiting the Brief Nuclear Usability Measure: A Preliminary Evaluation of its Validity and Reliability using Licensed Operators." In 2024 AHFE International Conference on Human Factors in Design, Engineering, and Computing (AHFE 2024 Hawaii Edition). AHFE International, 2024. http://dx.doi.org/10.54941/ahfe1005661.

Full text

Abstract:

Global energy consumption is expected to increase through 2050 (EIA, 2023). Global population grown, increased manufacturing, and higher living standards are cited as key drivers to pushing energy consumption beyond energy efficiency advances. In order to circumvent such grim projections, the role of nuclear electricity generation has a pivotal role in providing carbon-free electricity generation across the world. Within the United States, there have been thrusts in extending the operational lifespan of the existing light water reactor fleet through significantly modernizing these existing pla

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Plywood Manufacturing Plant Report"

1

Reichmuth, David, Jessica Dunn, and Don Anair. Driving Cleaner: Electric Cars and Pickups Beat Gasoline on Lifetime Global Warming Emissions. Union of Concerned Scientists, 2022. http://dx.doi.org/10.47923/2022.14657.

Full text

Abstract:

Passenger cars and trucks are one of the largest sources of global warming emissions in the US. Electric vehicles (EVs) have the potential to dramatically reduce these emissions, especially when charged by low-carbon renewable electricity. New UCS analysis finds that over its lifetime—from manufacturing to operation to disposal—the average new battery electric vehicle produces more than 50 percent less global warming pollution than a comparable gasoline or diesel vehicle. Based on the most recently available data on power plant emissions and EV sales, driving the average EV in the US produces

APA, Harvard, Vancouver, ISO, and other styles

2

Health hazard evaluation report: evaluation of dermatitis among sanders in a furniture manufacturing plant. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, 2013. http://dx.doi.org/10.26616/nioshheta201101803193.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Health hazard evaluation report: evaluation of work-related health concerns at a tire manufacturing plant. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, 2013. http://dx.doi.org/10.26616/nioshheta201201143185.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Health hazard evaluation report: evaluation of health symptoms and exposures among employees at a flooring manufacturing plant. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, 2018. http://dx.doi.org/10.26616/nioshhhe201601263301.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Health hazard evaluation report: evaluation of occupational exposures to noise and chemicals at an automobile parts manufacturing plant. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, 2016. http://dx.doi.org/10.26616/nioshhhe201501583262.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Health hazard evaluation report: HETA-2008-0155-3131, lung function (spirometry) testing in employees at a flavorings manufacturing plant - Indiana. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, 2011. http://dx.doi.org/10.26616/nioshheta200801553131.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Health hazard evaluation report: HETA-2008-0074-3081, ergonomic evaluation at a steel grating manufacturing plant, Tru-Weld Grating, Inc., Litchfield, Illinois. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, 2009. http://dx.doi.org/10.26616/nioshheta200800743081.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Health hazard evaluation report: HETA-2007-0033-3074, report on fixed obstructive lung disease in workers at a flavoring manufacturing plant, Gold Coast Ingredients, Inc., Commerce, California. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, 2008. http://dx.doi.org/10.26616/nioshheta200700333074.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Health hazard evaluation report: HETA-2007-0201-3086, evaluation of health concerns at a printed circuit board manufacturing plant, Sanmina-SCI� Corporation, Huntsville, Alabama. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, 2009. http://dx.doi.org/10.26616/nioshheta200702013086.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Health hazard evaluation report: HETA-2007-0124-3060, ergonomic evaluation of workers at a piston and cylinder liner manufacturing plant, Federal-Mogul, Lake City, Minnesota. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, 2008. http://dx.doi.org/10.26616/nioshheta200701243060.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!