Academic literature on the topic 'PMS Objekt'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'PMS Objekt.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "PMS Objekt"
1
Lebedeva, T. V., E. V. Zuev, and A. N. Brykova. "PROSPECTS OF EMPLOYING MODERN EUROPEAN CULTIVARS OF SPRING BREAD WHEAT IN THE BREEDING FOR POWDERY MILDEW RESISTANCE IN THE NORTHWESTERN REGION OF RUSSIA." Proceedings on applied botany, genetics and breeding 180, no. 4 (January 8, 2020): 170–76. http://dx.doi.org/10.30901/2227-8834-2019-4-170-176.
Full textAbstract:
Background. Powdery mildew of bread wheat caused by the fungus Blumeria graminis (DC.) E.O. Speer f. sp. tritici Em. Marchal is a widespread foliar disease of wheat in regions with cool and wet climate. It infects the foliage, stem and spike of the wheat host and causes yield reduction. Breeding for resistance is the economical way to control this disease. The object of this work was to analyze spring cultivars of wheat (Triticum aestivum L.) for powdery mildew resistance and some productivity indicators.Materials and methods. The study involved 150 European spring bread wheat cultivars whose resistance to the fungus was assessed at the seedling, heading and flowering phases of plant development. The population of the fungus manifested virulence to Pm1, Pm2, Pm3a-d, Pm4a-b, Pm5a, Pm6, Pm7, Pm8, Pm9, Pm16 and Pm19, and avirulence to Pm12. The damage to seedlings was evaluated using the scale from 0 (no damage) to 4 (abundant pustules). Resistance of the adult plants was analyzed according to the scale from 9 (no damage) to 1 (abundant pustules).Results and conclusions. Of the 150 cultivars, resistance at the seedling stage was shown by 12,7%, and at the adult stage by 20,1%. The cultivars ‘Dacke’, ‘SW Estrad’, ‘Sparrow’ and ‘Aranka’ were resistant in all phases of plant growth. ‘Naxos’ was characterized by a short period from seedlings to heading. The cultivars ‘Aranka’, ‘Zuzana’, ‘Septima’, ‘Tercia’ and ‘Sparrow’ had short stems, while ‘Torka’, ‘Sparrow’ and ‘Pasteur’ – large grains.
2
Mizuguchi, Takashi, and Kuniaki Sugai. "Object-Related Knowledge and the Production of Gestures with Imagined Objects by Preschool Children." Perceptual and Motor Skills 94, no. 1 (February 2002): 71–79. http://dx.doi.org/10.2466/pms.2002.94.1.71.
Full text
3
Stefanatos, Gerry A., Ester S. Buchholz, and Nancy Fay Miller. "Mental Rotation: A Task for the Assessment of Visuospatial Skills of Children." Perceptual and Motor Skills 86, no. 2 (April 1998): 527–36. http://dx.doi.org/10.2466/pms.1998.86.2.527.
Full textAbstract:
7 girls and 5 boys, ranging in age from 7 to 12 years, participated in the pilot testing of a mental rotation task developed for use in a comprehensive test battery of visuoperceptual abilities. Two asymmetric, three-dimensional objects were constructed from wood strips such that one object was the mirror-image of the other. Black and white photographs were taken of these objects in various spatial orientations along a horizontal plane. 16 photographs depicted the object right-side-up and in 16 the object was upside-down (rotated 180° in the vertical plane). These photographs were presented to the children who were asked to match each with the corresponding object. Analysis indicated correct judgements of the right-side-up images occurred more frequently than the upside-down images ( t11=4.73, p<.001). Using these data, adjustments were made to the task instructions to provide greater clarity for the young participants.
4
Harrington, Thomas L., and Denise Quon. "A Method of Stereoptically Simulating Manifolds of Three-Dimensional Objects Using Only a Single Display Pattern: A Shape-Depth-Texture Invariance." Perceptual and Motor Skills 68, no. 3_suppl (June 1989): 1163–75. http://dx.doi.org/10.2466/pms.1989.68.3c.1163.
Full textAbstract:
A means of conceptualizing and generating visual displays that are “self-stereoptic manifolds” is described. First, single patterns that can replace pairs of stereograms to produce illusions of depth are defined and an example is shown. Patterns such as these produce illusory three-dimensional objects hanging in space before or behind the display surface. It is further demonstrated geometrically that such a display actually has three-dimensional information embedded in it peculiar to each of a family, or manifold, of objects that can be experienced one at a time. Each object of the family appears when the viewer looks in space where it “exists.” The others remain invisible unless their locations are fixated. If any member of a specific manifold of three-dimensional illusory objects is physically duplicated as a real object and textured in the same way that the illusory object appeared to be, then this new real object will, in turn, generate an illusion of each of the other objects of the manifold when the observer fixates in space where each “exists.” Also, if then the viewer looks where the original display previously was, the newly constructed object will disappear and the display will reappear. The geometry and the advantages and disadvantages in relation to a stereoptic pair are discussed.
5
Triebenbacher, Sandra Lookabaugh, and Deborah W. Tegano. "Children's Use of Transitional Objects during Daily Separations from Significant Caregivers." Perceptual and Motor Skills 76, no. 1 (February 1993): 89–90. http://dx.doi.org/10.2466/pms.1993.76.1.89.
Full textAbstract:
Attachment behaviors of 105 toddlers were observed as the children separated from significant caregiver(s) at child care. Analysis indicated that children attached to a transitional object and using the object when separating engaged in ritualistic touching behaviors directed at a variety of targets. Results lend some support to the notion of transitional objects facilitating separation and reducing anxiety in mildly stressful situations.
6
Ridley, Dennis R. "A Neo-Whorfian Revisitation of Color Memory." Perceptual and Motor Skills 64, no. 1 (February 1987): 103–16. http://dx.doi.org/10.2466/pms.1987.64.1.103.
Full textAbstract:
A neo-Whorfian viewpoint on the effects of color names on color memory was tested in two studies with 140 undergraduate subjects. The controlling conception was that stimulus shapes of objects which have characteristic colors (e.g., tomato—red) can function like labels when viewing conditions are difficult. Hypothesized effects were that recognition or reproduction of the colors of such shapes would tend toward the best typical choices for the primary color term linguistically associated with the object. Exps. 1 and 2 pitted the major hypothesis against a prediction derived from Bruner's perceptual theory that familiar shapes would induce reproduction of a color toward the average object color. Two colors, actual average object colors, and best typical instances of associated color terms were made the overlapping segments of a variable color mixer on which color matches were made. Target stimuli from the middle ranges of the overlapping color-wheel segments were tachistoscopically presented either as familiar “red” or “green” objects or as plain circular stimuli. Reproductions consistently averaged toward best instances of primary color terms “red” or “green” rather than toward average object colors. Alternative interpretations of the data are discussed.
7
Ben-Tovim, David I., and M. Kay Walker. "Recall of the Visual Body Image Using a Novel Boundary Detection Task." Perceptual and Motor Skills 85, no. 2 (October 1997): 625–30. http://dx.doi.org/10.2466/pms.1997.85.2.625.
Full textAbstract:
A new task for eliciting a pictorial mental image of the body or other objects is described. The task involved relating a pair of crosses to the boundary of a mental image ‘projected’ onto a computer screen. Responses were assessed for accuracy defined as identifying a relationship between a cross and an image that would hold when a photograph (of the same object) was substituted for the mental image. A group of 30 female students achieved between 70 to 80% accuracy when using this task to assess mental images of their own faces, torsos, or a familiar nonbody object. Accuracy was similar for body and nonbody objects. The presence of some kind of quasipictorial representation of the body is confirmed. Its characteristics await further elucidation.
8
Noda, Mitsuru. "Imagery and Perceptual Basis of Matching Tasks in Young Children." Perceptual and Motor Skills 107, no. 2 (October 2008): 419–38. http://dx.doi.org/10.2466/pms.107.2.419-438.
Full textAbstract:
Object identification in perceptual tests may include constituents of mental rotation. A matching-to-sample task was conducted with same or different objects to look for evidence of rotation. Elementary schoolchildren (6 to 8 years old) in Grades 1 to 4 ( N = 264) participated, using the inclined Flags Test and the Water Level Test to ensure that children can use kinematic imagery for the Flags Test even if they used static imagery for the Water Level Test. Performance on the inclined Flags Test varied by age group. Use of implicit mental rotation of the inclined object was inferred in recognition. Also, children at the pre-operational stage showed a rotational effect, i.e., they could transform the object by turning it, thereby confirming kinematic imagery is used from age 6. As a consequence, solving both rotation tasks may require not only recognition of object frames but also objects internal to the frame.
9
Hardi, Eja Armaz. "Filantropi Islam: Zakat Saham di Pasar Modal Syariah Indonesia." Jurnal Bimas Islam 13, no. 1 (July 21, 2020): 51–72. http://dx.doi.org/10.37302/jbi.v13i1.106.
Full textAbstract:
Abstrak
Perkembangan kajian filantropi Islam beberapa dekade terakhir telah memberikan kontribusi signifikan terhadap perluasan implemetasi objek zakat. Objek harta kena zakat menjadi fokus diskusi oleh beberapa sarjana, lembaga sosial keagamaan, dan pemerintah dalam mempercepat pertumbuhan zakat di Indonesia. Harta kekayaan perusahaan, zakat profesi, dan kepemilikan saham tidak luput menjadi objek harta kena zakat, hal ini didiskusikan dan diputuskan pada Muktamar ke-3 yang diselenggaran oleh Majelis Ulama Indonesia (MUI) pada tahun 2009 di Sumatera Barat, kemudian pada tahun 2017 gagasan tersebut direalisasikan dengan kesepakatan kerjasama antara Badan Amil Zakat Nasional (BAZNAS), Pasar Modal Syariah Indonesia Bursa Efek Indonesia (PMS-BEI) dalam program Sedekah dan Zakat Saham Nasabah (SAZADAH). Dalam realisasinya, program tersebut membebankan kewajiban zakat kepada akumulasi portofilio investor bukan pada kekayaan perusahaan. Disamping itu program tersebut melibatkan berbagai pihak yang menjadikan alur distribusi zakat menjadi kompleks. Oleh karena itu menarik untuk melihat hubungan relasi sosial di antara pelaku filantropis dalam program SAZADAH di PMS-BEI tersebut. Dengan menggunakan pendekatan teori relasi sosial, artikel ini berkesimpulan bahwa implentasi zakat saham di PMS-BEI merupakan relasi yang saling menguntung kedua belah pihak, walaupun pola relasi dalam program tersebut masuk dalam kategori mediated-engagement strategies dengan pola contributory dan brokering philanthropy.
Abstract
The development of Islamic philanthropic studies in the last few decades has contributed significantly to the expansion of zakat objects implementation. The object of property subject to zakat becomes the focus of discussion by several scholars, religious social institutions, and the government in accelerating the growth of zakat in Indonesia. Company property, professional zakat and share ownership are zakat property objects, this matter was discussed and decided at the 3rd Congress held by the Indonesian Ulama Council (MUI) in 2009 in West Sumatra, then in 2017 the idea realized by a cooperation agreement between the National Amil Zakat Agency (BAZNAS) and the Indonesian Sharia Capital Market Indonesian Stock Exchange (PMS-BEI) in the Customer's Stock Alms and Zakat program (SAZADAH). In its realization, the program imposes zakat obligations on the accumulation of investor portfolios rather than on the company's wealth. Besides that the program involved various parties who made the distribution channel of zakat complex. Therefore, it is interesting to see the relationship of social relations among philanthropic actors in the SAZADAH program on the PMS-BEI. Using a social relations theory approach, this article concludes that the implementation of zakat shares on the PMS-BEI is a mutually beneficial relationship for both parties, even though the pattern of relations in the program falls within the category of mediated-engagement strategies with contributory and philanthropic brokering pattern.
10
Russeler, Jascha, Thomas F. Münte, and Frank Rösler. "Influence of Stimulus Distance in Implicit Learning of Spatial and Nonspatial Event Sequences." Perceptual and Motor Skills 95, no. 3 (December 2002): 973–87. http://dx.doi.org/10.2466/pms.2002.95.3.973.
Full textAbstract:
The serial reaction time task has been widely used to investigate implicit learning mechanisms. In the present study, we investigated the effect of stimulus distance on learning of a spatial sequence independent of a sequence of responses. Participants had to respond to objects appearing at four different locations. The objects were presented in a sequence of nine elements, whereas the location at which an object was presented followed a sequence of eight elements. Thus, the spatial and the object sequences were independent of each other. Four groups of subjects for whom the distances of the locations chosen to present objects on the computer screen (3 cm, 6 cm, 12 cm, or 22 cm) differed were tested. Only the nonspatial sequence was learned as indicated by enhanced response latencies in nonsequenced random blocks. Stimulus distance had no effect on the amount of sequence learning. Additional analyses for subgroups of subjects who did not show explicit knowledge of the sequences after completion of the task indicated that for implicit learners also, sequence learning was not influenced by stimulus distance. The results are discussed with respect to current theories of implicit serial learning.
Dissertations / Theses on the topic "PMS Objekt"
1
Borhani, Khomami Arash, and Pour Jonas Adel. "PMS Objekt vs ERAPAVE-ME : Design of pavement." Thesis, KTH, Byggteknik och design, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-296541.
Full textAbstract:
There are two types of superstructures in superstructure design, rigid and flexible. Rigid superstructures have higher load-bearing capacity than flexible superstructures. In Sweden, rigid superstructures are used for slow and heavy traffic roads such as bus stations and parking lots. A common example of rigid superstructures is cement-bound superstructures that have cement-bound layers instead of bitumen. Flexible superstructures can be bitumen bonded layers or unbound structures.The program PMS Object (Pavement Management Systems) is used in Sweden for designing highway constructions, new as well as maintenance / reinforcement of existing highways. PMS Object is based on linear elastic theory and the calculation methods are based on analytical - empirical dimensioning method. According to TRVK, the calculation method only works for the conditions and material that the designer chose during the design process. This makes it difficult for the designer when the material is to be replaced.The National Road & Transport Research Institute "VTI" started the process to develop a new program based on multilayer elastic theory and the calculation method is based on a mechanical analytical method. This means there are more alternatives for input data in the form of climate data as well as more models for calculating traffic loads and structures compared to when using the analytical - empirical dimensioning model PMS Object.The purpose of this thesis is to compare two highway design programs, PMS Object and ERAPAVE. During this work, we have studied the models and methods on which the software is based. For three realistic roads results are presented, compared, and discussed to determine in what way the software differ.The result shows that ERAPAVE shows more output, which gives you a better overall picture of the project. The program used more in-depth data and other models than PMS object. In ERAPAVE you can calculate the track depth development for all layers. PMS assumes that the rutting comes from the terrace, not from other layers. ERAPAVE can characterize traffic in different ways as standard axels or more detailed alternatives such as WIM data and that program considers the traffic's lateral distribution and more.Det finns två typer av vägöverbyggnader, styva och flexibla. Styva överbyggnader har högre bärighetsförmåga än flexibla. I Sverige används oftast styva överbyggnader vid långsamma och tungt trafikerande vägar som till exempel busstationer och parkeringar. Ett vanligt exempel på styva överbyggnader är cementbundna överbyggnader som har cementbundna lager istället för bitumen. Flexibla överbyggnader kan vara bitumenbundna lager eller obundna konstruktioner och det finns inga cementbundna lager i flexibla överbyggnader.PMS Objekt (Pavement Management Systems) används i Sverige vid dimensionering av vägöverbyggnader, nybyggda vägar såväl som underhåll/förstärkning av befintliga. PMS Objekt är baserat på linjärelastisk teori och beräkningsmetoderna på analytisk - empirisk dimensionering. Enligt TRVK väg fungerar beräkningsmetoden endast för dessa förhållanden och för materialet som konstruktören valde vid dimensioneringen. Det gör det svårt för konstruktören när materialen ska ersättas.Statens Väg- & Transportforsknings Institut “VTI” har börjat utvecklingen av ett nytt program som är baserat på elastisk teori för flerskikt och beräkningsmetoden är baserad på en mekanisk analytisk metod. Det betyder att det finns fler alternativ för beräkning av trafiklaster och strukturer jämfört med den analytisk – empirisk dimensioneringsmodellen.Syftet med examensarbetet är att jämföra två vägdimensioneringsprogram. Under detta arbete jämförs indata som används till varje program vid beräkning av olika projekt och deras skillnader. I nästa steg studeras hur modeller och metoder som programvarorna baseras på påverkar slutresultatet, dvs. dimensioneringen. Resultat presenteras för tre realistiska objekt där överbyggnaden dimensioneras med PMS Objekt och ERAPAVE varpå en kort diskussion följer.Resultatet visar att ERAPAVE visar mer utdata vilket gör att man får en bättre helhetsbild över projektet. Programmet använde fler ingående data och andra modeller än PMS objekt. I ERAPAVE kan man beräkna spårdjupsutveckling för alla lager. PMS antar att spårbildningen kommer från terrassen, inte från andra lager. ERAPAVE kan karakterisera trafiken på olika sätt som standardaxlar eller mer detaljerade alternativ som WIM data samt att programmet tar hänsyn till trafikens sidolägesfördelning med mera.
2
Ander, Julia. "Coating actions for an intersection affected by repeated rutting." Thesis, Linköpings universitet, Medie- och Informationsteknik, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-94551.
Full textAbstract:
Korsningar, busshållplatser, söderbackar och lastkajer är ytor med extrem påkänning på grund av hög trafikbelastning, låg hastighet, accelerationer, inbromsningar, svängningar, spårbundenhet och utsatthet för höga temperaturer. Den speciella lastsituationen riskerar orsaka spårbildning, vilket är det vanligaste problemet i korsningar. Genom att anpassa beläggningen efter den utsatta ytan så kan projektören påverka vägens funktion och livslängd. Syftet med detta examensarbete var att studera vilka beläggningsåtgärder som är lämpliga för utsatta körytor såsom korsningar och busshållplatser samt att se vad som orsakar skadebilden i en skadedrabbad korsning. Vidare var syftet att jämföra tre beläggningsalternativ för att se vilket som var mest fördelaktigt ur ett livslängds- och kostnadsperspektiv. Frågeställningarna var följande: 1. Vilka beläggningar är lämpliga för särskilt utsatta körytor såsom korsningar och busshållplatser? 2. Vad orsakar skadebilden vid frånfarten på Malmslättsvägen vid korsningen Malmslättsvägen/ Kaserngatan? 3. Vilken beläggningsåtgärd av ABS11, Densiphalt och PMA är bäst ur ett livslängd- och kostnadsperspektiv under 20 år för korsningen Malmslättsvägen/ Kaserngatan? För att besvara frågeställningarna gjordes litteraturstudier samt en fallstudie i form av okulär bedömning och balkanalys i det aktuella vägsnittet. Dessutom jämfördes livslängd och kostnader mellan beläggningsalternativen i PMS Objekt respektive genom en ekonomisk beräkningsmetod. Resultatet visade att ett bindlager kan uppta de skjuvkrafter som uppstår på utsatta ytor och förhindrar därmed sprickbildning och deformationer. CBÖ och platsgjuten betong har i studier visat begränsa spårbildning. Densiphalt är lämplig som beläggning på utsatta ytor och ger samtidigt ytan motståndskraft mot olja och bensin. IM är starkare, styvare och mindre deformationsbenägen än en vanlig asfalt och är därför lämplig på högtrafikerade vägar. Fallstudien på det aktuella vägsnittet visade att skadebilden hade två orsaker. Dels fanns ett ytslitage som var orsakat av den spårbundna dubbdäckstrafiken. Dessutom förekom plastisk deformation i det andra och tredje asfaltlagret till följd av otillräcklig stabilitet i asfaltmassan med hänsyn till den långsamtgående och stillastående trafiken. De obundna lagren var till synes opåverkade vid balkanalysen. Jämförelsen mellan beläggningsalternativen visade att Densiphalt hade längst livslängd följt av PMA och ABS11. Kostnadsmässigt hade PMA lägst annuitet följt av Densiphalt och ABS11. Orsaken till att ABS11 var dyrast var troligen behovet av mellanliggande akutåtgärder i form av gjutasfalt. Slutsatsen var att kompletterande bindlager, CBÖ, PMA, Densiphalt, betong och IM var lämpliga beläggningar för särskilt utsatta ytor. Skadebilden vid det undersökta vägsnittet bedömdes bero på ytslitage på grund av spårbunden dubbdäckstrafik samt plastisk deformation till följd av tung trafik. Densiphalt hade längst livslängd och PMA hade lägst annuitet. Konventionell ABS11 var sämst ur både livslängds- och kostnadsperspektiv, vilket bedömdes bero på behovet av mellanliggande akutåtgärder i form av gjutasfalt.
3
Helmersson, Elin, and Tim Nestéus. "Dimensionering av vägens bärlager : Hur påverkar asfaltbetongblandningen och hur effektiv är svensk dimensioneringsmetod?" Thesis, KTH, Byggteknik och design, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-142367.
Full textAbstract:
Det här arbetet handlar om asfaltbetongblandningar och hur variationen av dessa vid projektering påverkar vägarnas dimensionering i överbyggnaden mer specifikt bärlagret. Arbetet är baserat på litteraturstudier av den senaste teorin kring dimensionering av asfaltbetongblandningar i väglager samt tillhörande kravskrifter både från svenska och amerikanska myndigheter. Den inledande delen i examensarbetet omfattar bakgrunden till vägdimensionering. Inledningsvis behandlas materialet asfaltbetong och derss egenskaper för att sedan gå vidare till allmänt om vägar, hur de utformas, vägens funktionella egenskaper och skador som kan uppstå. Detta ska ge läsaren tillräckligt med bakgrund för att följa med i resten av arbetet där man kan läsa mer ingående om deformationsskador och vilka parametrar som är till stor vikt när man studerar skador som uppstår i asfaltbetongen samt relationen till dem egenskaper bitumen har. Rapporten avslutas med att resonera kring eventuella problem kring dimensioneringsmetoder samt betydelsen av blandningens hållfasthetsegenskaper och hur de påverkar vägarnas tjocklek. Slutsatsen i rapporten är att asfaltbetongblandningen har en betydelse för dimensionering av bärlager och att det kan vara någonting att beakta oftare vid vägdimensionering speciellt vid blandningar som skiljer sig mycket från standardvarianterna.This essay is about bitumen concrete pavement mixtures and how the variation of these affects the design of the superstructure of the road during the design-stadium, more specifically the pavement. The essay is based upon studies of literature written about the latest theory of asphalt concrete design for roads as well as the texts with regulations from Swedish and American government agencies. The introductory parts of the essay consist of the background to road design. Initially bitumen concrete and its characteristics are discussed and move on to general information about roads, how they are designed, the roads serviceable characteristics and finally the damage that can develop. This is meant to give the reader enough background to follow the rest of the essay where you can read more about deformation and which parameters that are of importance when you study deformation in bitumen concrete as well as the relation between the characteristics of bitumen concrete and bitumen. The essay is then finished with a argumentation about eventual problems with design methods and the significance of the bitumen concrete mixture’s strength parameters and how they affect the thickness of the road superstructure. The conclusion is that the asphalt concrete mixture has an impact on the design of the pavement of the road and that it should be something to take into account more often in road design, especially when you are using a mixture that differs much from the standard mixtures.
4
Elmehög, Hampus. "Uppföljning av absoluta tjälrörelser : En fallstudie av väg E10 i Kiruna." Thesis, Luleå tekniska universitet, Geoteknologi, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-72057.
Full textAbstract:
Detta examensarbete har haft som mål att undersöka tjällyftningen hos en väg i en fältstudie och utvärdera reliabiliteten hos två olika modeller för skattning av tjällyftning. Modellerna som har studerats är Trafikverkets nuvarande, vilken är implementerad i deras vägdimensioneringsverktyg PMS Objekt, samt segregation potential theory. Den studerade vägsträckan är belägen i Kiruna. I vägen har borrkärneprover tagits och vägens obundna lager, inklusive terassmaterial, har blivit analyserade i laboratorium. Dessa tester inkluderar både geoteknisk klassificering och endimensionella frysförsök på terassmaterialet. Materialets tjälfarlighet har klassificerats enligt både Trafikverkets eget och det amerikanska USACEs system. Alla prover, inklusive terrassmaterialet, består huvudsakligen av grus och sand. Enligt båda de använda klassificeringssystemen bedöms alla prover som icke tjälfarliga. Nivåmätningar utförda på vägen visar dock att tjällyftning ändå förekommer i vägen. Denna tjällyftning har inte kunnat modelleras framgångsrikt i PMS Objekt, där ingen tjällyftning alls fås trots att en dimensionerande vinter tillämpas i analysen. Däremot har en god överensstämmelse mellan bakåträknad och empiriskt beräknad tjälfarlighetsklassificering med SP0-värde enligt segregation potential theory kunnat ses. Även när detta beräknas utifrån utförda frysförsök fås en relativt god överensstämmelse. Studiens främsta fynd är att den visar på att även material som bedöms som ej tjällyftande enligt de två systemen för tjälfarlighetsklassificering faktiskt orsakar tjällyftning och att detta omfattar både terrass- och överbyggnadsmaterial. Studien visar att detta tjällyft främst beror på primärt lyft, varför klassificeringarna stämmer ganska väl om endast det sekundära lyftet avses. Studien har även visat på att Trafikverkets nuvarande modell är otillräcklig när det kommer till att modellera tjällyftning för grovkorniga jordar. Slutligen har studien även visat på möjligheten att bedöma jords tjälfarlighet med hjälp av segregation potential theory, även om också denna metod endast kan användas för att modellera sekundärt lyft.The aim of the master thesis has been to examine the frost heaving of a road in a field study and to evaluate the reliability of two different models for estimation of frost heaving. The studied models are the current one of the Swedish Transport Administration, which is implemented in their road design tool PMS Objekt, and the segregation potential theory. The studied road section is located in Kiruna, in the northern part of Sweden. The road has been cored and the unbound layers of it, including the subgrade, have been analyzed in laboratory. These analyses include both geotechnical characterization and one-dimensional frost heave tests of the subgrade material. The frost susceptibility of the collected material has been classified according to both the Swedish Transport Administrations system and the American USACE’s system. All samples, including the subgrade, consist mainly of gravel and sand. According to both the used classification systems all samples are classified as not frost susceptible. However, the elevation measurements of the road show that frost heaving occurs in it despite this. This heaving has not been possible to model successfully in the program PMS Objekt. In it the frost heave prediction yields no heave at all, despite applying a design winter (worst case) in the analysis. A good conformity has however been observed between back-calculated and empirically evaluated frost susceptibility using segregation potential theory. A quite good conformity has also been observed when the same thing is evaluated from the preformed freeze tests. The most important finding of the study is that even material that is categorized as non-frost susceptible according to the two studied systems actually does heave. This finding includes both subgrade aswell as the unbound material in the superstructure. It has been found that the total frost heave observed in this study originates mainly from primary heaving, meaning the studied systems are quite correct in their frost susceptibility classification if only secondary heaving is intended. The study has also shown that the current model applied in PMS Objekt is poor in predicting the amount of heaving in coarse subgrades. Finally, the study has also shown the possibility to evaluate a soils frost susceptibility using segregation potential theory, although this model aswell is only applicable to secondary heave
5
Šuba, Pavel. "Polyfunkční objekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227643.
Full textAbstract:
This thesis solves the design of multifunctional building. The building is situated on the outskirts of Mikulov in the cadastral area Mikulov in Moravia. Plot number is the 5087th. Multifunctional house will be used for housing of 26 people and providing commercial services. There are considered groceries and hairdressing salon. The building is designed without a basement, four-storey, with a gabled roof. It is based on the footings of plain concrete. The structural system consists of wall formwork system from VELOX.
6
Törnå, Niklas, and Erik Segerstedt. "Rekommendationer för vägkonstruktion i betong eller asfalt : Med hänsyn på lågtrafikerad väg sett för koldioxidutsläpp samt sprickor uppkomna av tjällyft vid subarktiskt klimat." Thesis, Luleå tekniska universitet, Institutionen för samhällsbyggnad och naturresurser, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-70352.
Full textAbstract:
Skandinavien har en lång tradition att bygga vägar i asfalt framför att konstruera dem i betong. Examensarbetets syfte är att ta reda på om alternativet betong är mer lönsamt och miljövänligare ur ett livscykelperspektiv. Som jämförelse har en möjlig omläggning av Väg 97 i Norrbotten studerats. Programmen som använts för dimensionering och klimatanalys är PMS Objekt och Trafikverkets Klimatkalkyl. Rapporten har utrett hur beläggningsmaterialen asfalt och betong fungerar i ett subarktiskt klimat, där betongens styvhet kan vara en nackdel eftersom den är mer känslig för sprickbildning vid tjällyft i jämförelse med asfalt (men detta kan förändras om klimatet blir varmare). En fördel med betongen är dess livslängd på 40 år jämfört med asfaltens livslängd på 8 år. Asfalten behöver underhållas och bytas oftare samtidigt som kostnaden för bytet är mindre och enklare att genomföra jämfört med betongvägar. Därutöver har examensarbetet studerat tjälsprickor, hur de uppkommer, preventiva metoder och underhåll. Det sker även ett klargörs vad en Livscykelanalys är och hur den genomförs för att beräkna en teoretisk mängd koldioxid vid produktion av vägen. Resultatet har delats upp i tre fallstudier: tjällyft i PMS Object, handberäkningar av spänningar i betong och storlek på möjlig tjälspricka och CO2 som generas vid produktion av vägkropp i de två olika materialen. Betongen klarar av 20 mm tjällyft och det beräknas bli 6 mm medan asfalt klarar av upp till 50 mm och har en beräknat värde på 41 mm. Därutöver släpper asfalten bara 39 136 ton vilket är en mindre mängd än betongen. Asfalten vinner därför över betongen i det här fallet, men när vägarna blir mer trafikerade eller/och om tjälen blir mindre på grund av klimatförändringar kan detta förändras. En av de mest bidragande faktorerna till att asfalten vinner är att betongen klarar av mindre deformation på grund av sina styva egenskaper. När två fall studerades och jämfördes med betongens tryckhållfasthet klarades sig enbart det ena (spänningar på 10 kPa/m och 2,21 kPa/m uppstår i betongen på grund av temperaturskiftningar, detta jämfört med betongens tryckhållfasthet på 4,1 kPa/m). För det värsta fallet, där plattan beräknas spricka på mitten, har en teoretisk spricka beräknats till ca 0,3 mm. En felkälla vid dessa beräkningar är att det enbart tar hänsyn till 16 års tjällyft, trots att betongen är beräknad att ligga i 40 år. Vår rekommendation är därför att bygga vägen i asfalt eftersom det i dagsläget är för få trafikanter (<9000 ÅDT) och att beläggningen belastas av för mycket deformationer av temperaturskiftningar. Att betong även genererar mer koldioxid spelar även in, men vi misstänker att detta kan bero på att denna skillnad kan bero på för generella dimensioneringsprogram. Vi har resonerat kring möjliga merkostnader med att bygga med ett mer koldioxidgenererande material vilket kan orsaka stora kostnader för samhället på grund av dess inverkan på klimatförändringar i efterhand trots att den initiala kostnaden kan bli lägre. Dock är denna kostnad problematisk att beräkna på grund av många okända faktorer. Det som skulle vara intressant att studera vidare i framtida forskning är att med handberäkningar, alternativ skapa ett nytt program, som på ett mer rättvisande sätt kan beräkna de två olika materialen skillnader och styrkor. I dagsläget är det för många generaliseringar för att verkligen ställa de två materialen mot varandra. Däröver skulle det också vara intressant att se hur betong och asfalt kan användas tillsammans, i hybridvägar. Att till exempel använda asfalt på det generella vägnätet och betong i rondeller, korsningar, eller busshållplatser där belastningen på beläggningen är större (mer specifikt undersöka hur fogarna mellan dessa material skulle utformas).Scandinavia has a long tradition of building roads in asphalt rather than constructing them in concrete. Therefore, this report's purpose is to find out which material would be more profitable in an environmentally perspective while building an extension of the regional Road 97 located in the subarctic county of Norrbotten. Software’s the industry use to design roads are, among others, PMS Object and Trafikverkets Klimatkalkyl. The report analyzes how asphalt and concrete differ in subarctic climate, and concludes that concrete has great disadvantage because it cannot deform sufficiently enough as needed to due to frost heaves, especially compared to asphalt. The concrete should last for 40 years compared with asphalts estimated lifespan of 8 years. This means that the asphalt needs a shorter maintenance plan and if something goes wrong in the production it’s not the same amount money wasted. The report concluded what frost cracks are, how they occur and are counteracted (during the construction phase and maintenance). Furthermore it clarifies what a Life Cycle Analysis is and how it is implemented to calculate the amount of carbon dioxide in the production of a road. The result has been divided into three cases: 1. PMS Object Simulations of frost heaves, 2. hand calculations of tension in concrete resulting and the size of the formed frost cracks, 3. the amount of CO2 generated in the production. Those three cases gives the outcome that concrete has a frost heave capability of 20 mm and a calculated value of 6 mm thermal expansion while asphalt is able to handle 50 mm and have a calculated 41 mm expansion. The asphalt releases only 39 136 tons of CO2, which is less than the concrete. Asphalt therefore wins over the concrete, but the tables might turn if the roads get more traffic and frost heave reduces due to climate changes. The decisive factor in making asphalt the winner in this race is that the concrete can handle less deformation due to its stiffed properties. In order to show this phenomena two cases were studied and compared to the standardized compressive strength of the concrete (4,1 kPa/m for C50); the worst case scenario ended up with 10 kPa/m (and would crack) and the normal case created a tension of 2.21 kPa/m. The crack of the worst case scenario has about a 0,3 mm theoretical crack width. A source of error in these calculations is that it only takes into account the 16 seasons of frost heaves, despite that the concrete is estimated to last for 40 years. Our recommendation is therefore to build the road in asphalt since the current traffic on the road is below 9000 AADT and the pavement is greatly affected by frost heaves. Concrete would also increase release more carbon dioxide during its production, but we suspect this may be because of insufficient amount of critical factors in the design software. We have discussed the possible additional costs of building the road with a material that generates high amount carbon dioxide, and studied the future costs for the society due to its impact on climate change. However, this cost is problematic to calculate due to its many unknown factors. It would be interesting to do further research and determine what hand calculations should be used, or alternatively, create a new program that can calculate the differences between the two materials more accurately. At present, there are too many generalizations that makes it nearly impossible to compare the two materials against each other. Moreover, it would also be interesting to see how concrete and asphalt can be used together, in hybrid roads. For example, using asphalt on the general road network and concrete in roundabouts, intersections, or bus stops where the load on the pavement can be greater (more specifically, examine how the joints between these materials should be designed).
7
Sun, C. P., X. F. Liu, D. L. Zhou, S. X. Yu, and Andreas Cap@esi ac at. "Localization of Macroscopic Object Induced by the Factorization of." ESI preprints, 2000. ftp://ftp.esi.ac.at/pub/Preprints/esi958.ps.
Full text
8
Kurmann, Christian A. "Zero copy strategies for distributed CORBA objects in clusters of PCs /." [S.l.] : [s.n.], 2002. http://e-collection.ethbib.ethz.ch/show?type=diss&nr=14950.
Full text
9
Evanko, Liberty Rae. "Development of an H alpha index for the detection of PMS candidates in young open clusters /." Diss., CLICK HERE for online access, 2007. http://contentdm.lib.byu.edu/ETD/image/etd1715.pdf.
Full text
10
Giraud, Thibaut. "Il y a des choses qui n'existent pas : en défense d'un meinongianisme logiquement cohérent et ontologiquement économe." Paris, EHESS, 2016. http://www.theses.fr/2016EHES0004.
Full textAbstract:
Il y a toutes sortes de choses dont nous pouvons parler ; et, parmi ces choses de toutes sortes, il y a des choses qui n'existent pas (comme le monstre du Loch Ness ou le rond carré). L'essentiel de ma thèse consiste à formuler avec rigueur et précision des théories qui expriment une telle intuition, théories que j'appellerai des meinongianismes, puis à les défendre contre deux types d'objection : d'abord des objections qui remettent en cause leur cohérence logique, ensuite des objections qui accusent leur coût ontologique. Je défendrai donc d'une part qu'il y a des théories meinongiennes logiquement cohérente : différentes approches ont déjà été développée et je montrerai ce qu'elles ont en commun ainsi que les avantages et les inconvénients de chacune. D'autre part, dans une seconde partie plus originale, je défendrai que ces théories meinongiennes cohérentes peuvent être formulées de façon à ce que leur engagement ontologique soit acceptable. Autrement dit, je montrerai pourquoi les objets meinongiens ne correspondent pas forcément à des entités meinongiennes. La prise de conscience du fait que les logiques meinongiennes n'engagent pas forcément envers une ontologie meinongienne devrait permettre de renouveler d'une façon beaucoup plus large l'intérêt pour ces logiques : si la preuve est faite que les théories meinongiennes peuvent être logiquement cohérentes et ontologiquement économes, une telle approche étant de surcroît féconde du point de vue philosophique (de nombreuses applications en témoignent), alors il semble bien que la charge de la preuve ne soit plus du côté des défenseurs de ces théories mais revienne à ses adversairesThere are all sorts of things we can talk about; and, among these things of all sorts, there are things that do not exist (such as the Loch Ness Monster or a round square). A theory that makes sense of this intuition is what I call a Meinongian theory. The purpose of my dissertation is to expound different kinds of Meinongian theories and to defend them against two main objections: first, a logical objection according to which Meinongian theories are inconsistent; then, an ontological objection according to which the ontological cost of these theories is unacceptable. In a first part, I will show that Meinongian theories can be consistent: different accounts have already been developed by various authors and will show what they have in common as well as the advantages and disadvantages of each. Then, in a second and more original part, I will show how these consistent Meinongian theories can be formulated in such a way that their ontological commitment becomes acceptable. In other words, I will show why Meinongian objects do not necessarily correspond to Meinongian entities. This result could bring a much broader interest in Meinongian logic among philosophers: if a Meinongian theory can be logically consistent and ontologically parsimonious, since it is also a fruitful approach from a philosophical point of view (Meinongian logic has indeed many applications to many fields, especially in relation with intentionnality), it seems that the onus would no longer be on the side of the defenders of Meinongianism but should return to their opponents
Books on the topic "PMS Objekt"
1
Antiques roadshow 20th-century collectibles: The complete guide to collecting 20th-century toys, glassware, costume jewelry, memorabilia, ceramics & more, from the most-watched series on PBS. New York: Workman Pub, 2003.
Find full text
2
Miville-Deschênes, François. Quand ils ne faisaient pas la guerre: Ou, L'aspect domestique de la vie militaire au fort Chambly pendant le régime français d'après les objets archéologiques. Ottawa: Lieux et parcs historiques nationaux, Environnement Canada, 1987.
Find full text
3
Farb, Benson, and Dan Margalit. A Primer on Mapping Class Groups (PMS-49). Princeton University Press, 2017. http://dx.doi.org/10.23943/princeton/9780691147949.001.0001.
Full textAbstract:
The study of the mapping class group Mod(S) is a classical topic that is experiencing a renaissance. It lies at the juncture of geometry, topology, and group theory. This book explains as many important theorems, examples, and techniques as possible, quickly and directly, while at the same time giving full details and keeping the text nearly self-contained. The book is suitable for graduate students. It begins by explaining the main group-theoretical properties of Mod(S), from finite generation by Dehn twists and low-dimensional homology to the Dehn–Nielsen–Baer–theorem. Along the way, central objects and tools are introduced, such as the Birman exact sequence, the complex of curves, the braid group, the symplectic representation, and the Torelli group. The book then introduces Teichmüller space and its geometry, and uses the action of Mod(S) on it to prove the Nielsen-Thurston classification of surface homeomorphisms. Topics include the topology of the moduli space of Riemann surfaces, the connection with surface bundles, pseudo-Anosov theory, and Thurston's approach to the classification.
4
Jullien, François. La grande image n'a pas de forme ou du non-objet par la peinture. Seuil, 2003.
Find full text
5
Rodríguez, Marcelo. Subjetividade, manipulação e pós-verdade: EUA e Irã pelos olhos da CNN em Espanhol. Editora Vecher, 2020. http://dx.doi.org/10.47585/9786599324208.
Full textAbstract:
Esta obra tem como fato gerador o assassinato do general iraniano Qasem Soleimani por parte dos Estados Unidos, sob as ordens do presidente Donald Trump. A partir daí, é feita uma revisão bibliográfica relacionada às discussões jornalísticas sobre objetividade, mercado e agenda-setting, além da comunicação como cultura, a manipulação e o fenômeno da pós-verdade. Tudo, tendo como objeto de uma análise de conteúdo a cobertura realizada pela CNN em Espanhol na sua conta do Twitter, com foco, fundamentalmente, na construção narrativa e semântica. Foi possível identificar, nesse contexto, a subjetividade do discurso jornalístico pró-Estados Unidos e anti-Irã, principalmente a partir de recursos característicos da pós-verdade, com a finalidade de manipular a opinião pública, principalmente ocidental.
6
Textor, Mark. A Brief Conclusion. Oxford University Press, 2017. http://dx.doi.org/10.1093/oso/9780199685479.003.0014.
Full textAbstract:
I would like the reader to take away from this book the following morals.First, Brentano was wrong to say that intentionality is the most distinctive mark of mental phenomena (see PES, 75 [I, 137]). Our conception of mental phenomena in not unified by the thesis that all and only mental acts have an object. It cannot be so unified because the notion of direction or of-ness itself is neither unified nor generally applicable to mental phenomena. Even if intentionality is a first-person concept that one can only come to grasp if one can instantiate and introspectively access mental acts, propositional and interrogative attitudes pose insuperable problems for Brentano’s Thesis....
7
Tan, Jingzhi, and Brian Hare. Prosociality among non-kin in bonobos and chimpanzees compared. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780198728511.003.0010.
Full textAbstract:
Models of the origin of human prosociality towards non-kin have been primarily developed from chimpanzee studies. Substantially less effort has been made to consider the prosociality of bonobos. Like chimpanzees, bonobos cooperate with non-kin extensively but, unlike chimpanzees, immigrating members are central to bonobo cooperation. In experiments bonobos are tolerant during encounters with strangers and during co-feeding. They help strangers without immediate tangible reward, and forfeit monopolizable food to facilitate a physical interaction with them. Such prosociality seems proactive as it is not elicited by solicitation. Bonobos also seem to prefer sharing food over non-food objects, while chimpanzees reliably transfer non-food objects rather than food. These findings highlight the possibility that human sharing with strangers might have also evolved as a mutualistic endeavour to initiate a long-term partnership. Future models of human prosociality will need to incorporate findings from both Pan species. Les modèles de l’origine de la prosocialité humaine entre non-parents ont été développées en majorité à partir d’études de chimpanzé. Beaucoup moins d’efforts ont été faits pour considérer la prosocialité des bonobos. Comme les chimpanzés, les bonobos coopèrent extensivement avec non-parents mais, contrairement au chimpanzés, les membres immigrants sont au centre de la coopération bonobo. Les bonobos sont tolérants, en expérimentation, durant les rencontres avec des étrangers et durant la co-alimentation. Ils aident les étrangers sans récompense immédiate, et abandonnent la nourriture monopolisable pour faciliter une interaction physique avec eux. Une prosocialité pareille paraît proactive vu qu’elle n’est pas sollicitée. Les bonobos, il paraît, préfèrent partager la nourriture que d’autres objets, alors que les chimpanzés préfèrent partager les objets non-aliments que la nourriture. Ces résultats soulignent la possibilité que le partage humain avec les étrangers a pu évoluer comme une enquête mutuelle pour initier un partenariat à longue durée. Les modèles futurs de la prosocialité humaine doivent inclure les résultats des deux espèces Pan.
8
Sáenz, Carmen López. The Phenomenal Body Is Not Born; It Comes to Be a Body-Subject. Oxford University Press, 2017. http://dx.doi.org/10.1093/oso/9780190608811.003.0011.
Full textAbstract:
Phenomenology distinguishes body-object (Körper) from lived body (Leib). It is interested in the latter, in the body that manifests itself to us in our lived experiences and gives them expression. Beauvoir’s phenomenology of sexual difference shares this starting point. This contribution continues Beauvoir’s hermeneutic by focusing on her well-known declaration: “On ne naît pas femme: on le devient,” keeping in mind that interpretations are given from and for certain situations; our situation is that of the 21st century and of phenomenological and feminist investigations. Given that translation is itself a mode of interpretation, this paper will show how The Second Sex has contributed to an understanding of the becoming of woman, first by giving an account of the hermeneutic understanding of translation, and next the phenomenological “style” of Beauvoir and the reciprocal influence between her and Merleau-Ponty, which opens the possibility of sexual difference without determinisms.
9
Egan, Frances. Representationalism. Edited by Eric Margolis, Richard Samuels, and Stephen P. Stich. Oxford University Press, 2012. http://dx.doi.org/10.1093/oxfordhb/9780195309799.013.0011.
Full textAbstract:
The article gives an overview of several distinct theses demonstrating representationalism in cognitive science. Strong representationalism is the view that representational mental states have a specific form, in particular, that they are functionally characterizable relations to internal representations. The proponents of strong representationalism typically suggest that the system of internal representations constitutes a language with a combinatorial syntax and semantics. Braddon-Mitchell and Jackson argued that mental representations might be more analogous to maps than to sentences. Waskan argued that mental representations are akin to scale models. Fodor and Fodor and Pylyshyn argued that certain pervasive features of thought can only be explained by the hypothesis that thought takes place in a linguistic medium. A physical symbol system (PSS) hypothesis is a version of strong representationalism, the idea that representational mental states are functionally characterizable relations to internal representations. The representational content has a significant role in computational models of cognitive capacities. The internal states and structures posited in computational theories of cognition are distally interpreted in such theories. The distal objects and properties that determine the representational content of the posited internal states and structures serve to type-individuate a computationally characterized mechanism. Strong Representationalism, as exemplified by the PSS hypothesis, construes mental processes as operations on internal representations.
10
Robaina, José Vicente Lima, Roniere dos Santos Fenner, Léo Anderson Meira Martins, Renan de Almeida Barbosa, and Jeferson Rosa Soares. Fundamentos Teóricos e Metodológicos da Pesquisa em Educação em Ciências. Editora BAGAI, 2021. http://dx.doi.org/10.37008/978-65-89499-05-3.05-01-21.
Full textAbstract:
A ideia de elaboração do livro Fundamentos Teóricos e Metodológicos da Pesquisa em Educação em Ciências, teve sua origem a partir da realização de uma disciplina de Metodologia da Pesquisa, ministrado pelos professores organizadores desta obra em 2019/01 no Programa de Pós-Graduação em Educação em Ciências (PPGEC) da Universidade Federal do Rio Grande do Sul (UFRGS). Como avaliação da referida disciplina, os alunos foram divididos em grupos e coletivamente escreveram um texto sobre cada tipo de pesquisa que costumeiramente são abordadas em Educação em Ciências. O livro está divido em seis seções, que apresentam os principais tipos de pesquisa trabalhados em Educação em Ciências: quanto a abordagem, quanto a Natureza, quanto aos objetivos, quanto aos procedimentos ou escolha do objeto de estudo, quanto a Técnica de Coleta de Dados (Instrumentos) e quanto aos Métodos de Análise de Dados. Com essa obra, esperamos contribuir com os estudos de nossos alunos (Mestrandos e Doutorandos) que vierem a cursar essa disciplina no futuro bem como proporcionar a comunidade acadêmica uma nova obra para ser utilizada nas pesquisas em Educação em Ciências.
Book chapters on the topic "PMS Objekt"
1
Morini, M., D. Maccagni, L. Maraschi, D. Molteni, E. G. Tanzi, and A. Treves. "X-Ray Variability of the Bright BL LAC Object PKS 2155-304." In X-Ray Astronomy in the Exosat Era, 601–6. Dordrecht: Springer Netherlands, 1985. http://dx.doi.org/10.1007/978-94-009-5448-9_81.
Full text
2
Maccagni, D., L. Chiappetti, L. Maraschi, D. Molteni, M. Morini, E. G. Tanzi, A. Treves, and A. Wolter. "X-Ray Bursting Activity in the BL Lacertae Object PKS 2155-304." In Quasars, 267–68. Dordrecht: Springer Netherlands, 1986. http://dx.doi.org/10.1007/978-94-009-4716-0_68.
Full text
3
Wall, J. V., I. J. Danziger, M. Pettini, R. S. Warwick, and W. Wamsteker. "PKS 2005-489: A Very Bright BL LAC Object in a Nearby Galaxy." In Quasars, 59–60. Dordrecht: Springer Netherlands, 1986. http://dx.doi.org/10.1007/978-94-009-4716-0_12.
Full text
4
Stadler, Daniel, Lars Wilko Sommer, and Jürgen Beyerer. "PAS Tracker: Position-, Appearance- and Size-Aware Multi-object Tracking in Drone Videos." In Computer Vision – ECCV 2020 Workshops, 604–20. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-66823-5_36.
Full text
5
Nakamura, Yasuaki, Hiroyuki Dekihara, and Ryo Furukawa. "Spatio-Temporal Data Management for Moving Objects Using the PMD-Tree." In Advances in Database Technologies, 496–507. Berlin, Heidelberg: Springer Berlin Heidelberg, 1999. http://dx.doi.org/10.1007/978-3-540-49121-7_44.
Full text
6
Sacriste, Valérie. "Prologue : la guerre du quotidien n’aura pas lieu !" In Nos vies, nos objets, 127–30. Presses universitaires du Septentrion, 2018. http://dx.doi.org/10.4000/books.septentrion.20993.
Full text
7
Teil, Geneviève, Sandrine Barrey, Pierre Floux, and Antoine Hennion. "Pour conclure. Un objet qui ne tient pas." In Le vin et l’environnement, 75–82. Presses des Mines, 2011. http://dx.doi.org/10.4000/books.pressesmines.529.
Full text
8
Sánchez-Fernández, María Dolores, Rosa María Vaca-Acosta, and Alfonso Vargas-Sánchez. "Socially Responsible Practices in Hotels." In Corporate Social Responsibility in the Hospitality and Tourism Industry, 28–45. IGI Global, 2016. http://dx.doi.org/10.4018/978-1-4666-9902-1.ch003.
Full textAbstract:
The objective of this study is to analyze the influence of institutional pressures (normative, coercive and mimetic) according to gender in the implementation of social responsibility in hotels. The object of this study is three, four and five-star hotels located in the Euro region (Galicia and North of Portugal). To achieve these objectives a quantitative study is carried out. The proposed model of research; the Technical Partial Least Square (PLS), methodology based on Structural Equations Models (SEM) using the software Visual-PLS has been applied. A questionnaire consisting of existing validated scales was drawn up and used for the collation of data.
9
Favre, Liliana María. "MDA-Based Object-Oriented Reverse Engineering." In Advances in Computer and Electrical Engineering, 199–229. IGI Global, 2010. http://dx.doi.org/10.4018/978-1-61520-649-0.ch010.
Full textAbstract:
Reverse engineering is the process of analyzing software systems to extract software artifacts at a higher level of abstraction so that it is easier to understand them, e.g., for reengineering, modernizing, reuse, migration or documenting purposes. This chapter describes an approach to reverse engineering object oriented code. A central idea in reverse engineering is exploiting the source code as the most reliable description both of the system behavior and of the organization and its business rules. We propose an approach for MDA-based object oriented reverse engineering that integrates classical compiler techniques, metamodeling techniques and formal specification for recovering designs and architectures. We analyze reverse engineering of PSMs and PIMs from object-oriented code. Models are expressed using UML and OCL. On the one hand, the subset of UML diagrams, that are useful for platform-dependent models, includes class diagram, object diagram, state diagram, interaction diagram (collaboration diagram and sequence diagram) and package diagram. On the other hand, a PIM can be expressed by means of use case diagrams, activity diagrams, interaction diagrams to model system processes and state diagrams to model lifecycle of the system entities.
10
Tisseron, Serge. "Les objets numériques ne sont pas des doudous : penser le processus plutôt que les objets." In Les nouveaux objets transitionnels, 77. ERES, 2016. http://dx.doi.org/10.3917/eres.marce.2016.01.0077.
Full textConference papers on the topic "PMS Objekt"
1
Erdim, Hu¨seyin, and Horea Ilies¸. "A Point Membership Classification for Sweeping Solids." In ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/detc2007-34827.
Full textAbstract:
Sweeps are considered to be one of the basic representation schemes in solid modeling, and have numerous applications in very diverse fields ranging from engineering design and manufacturing to computer graphics. Despite their prevalence, many properties of the general sweeps are not well understood. Furthermore, boundary evaluation algorithms for 3-dimensional solid objects currently exist only for reasonably simple objects and motions. One of the main reasons for this state of affairs is the lack of a generic point membership test for sweeps. In this paper we describe a point membership classification (PMC) for sweeping solids of arbitrary complexity moving according to one parameter affine motions such that the initial and final configurations of the moving object do not intersect. Our PMC test is defined in terms of inverted trajectory tests against the original geometric representation of the generator object. This PMC test provides complete geometric information about the set swept by the 3-dimensional moving object, and can play a fundamental role in sweep boundary evaluation and trimming algorithms, as well in a number of practical applications such as contact analysis of higher pairs in design and manufacturing. Since our PMC is formulated in terms of intersections between inverted trajectories and the generator, it can be implemented for any geometric representation that supports curve-solid intersections.
2
Guo, Zhenyu, Yujuan Sun, and Muwei Jian. "Three Dimensional Surface Reconstruction Based on the Reference Object and PMS." In 2017 IEEE International Conference on Computational Science and Engineering (CSE) and IEEE International Conference on Embedded and Ubiquitous Computing (EUC). IEEE, 2017. http://dx.doi.org/10.1109/cse-euc.2017.142.
Full text
3
Wu, Xiaoyue, and Bo Guo. "An Object-Oriented Simulation Model for Reliability of PMS with Time Redundancy." In 2017 IEEE International Conference on Software Quality, Reliability and Security Companion (QRS-C). IEEE, 2017. http://dx.doi.org/10.1109/qrs-c.2017.36.
Full text
4
Roth, Martin M., Thomas Becker, Andreas Kelz, and Petra Bohm. "Faint object 3D spectroscopy with PMAS." In SPIE Astronomical Telescopes + Instrumentation. SPIE, 2004. http://dx.doi.org/10.1117/12.552003.
Full text
5
Narsoo, Jeetendre, and Nawaz Mohamudally. "Identification of Design Patterns for Mobile Services with J2ME." In InSITE 2008: Informing Science + IT Education Conference. Informing Science Institute, 2008. http://dx.doi.org/10.28945/3274.
Full textAbstract:
The functional approach to software development has been used for years and new methodologies have evolved, including, object-oriented approach. Objects are sharing an important part in the software business. They have become the building blocks of many systems whether commercial applications, real-time applications or embedded systems applications. As objects represent an abstraction of the real world, systems modelled using objects can be easily read and interpreted. Design patterns have been used on desktop systems. Today, the trend is towards building applications on small hand-held devices like mobile phones, PDAs or pocket PCs. Due to the limitations of hand-held devices, applications should be optimised and design pattern is the right choice to cater for this need. In this paper, the design pattern chosen for mobile services using J2ME is the One-function structure design patterns. Although it resembles the behavioural design pattern, the One-function structure name has been given because the pattern is made up of other classes and objects and is performing a single task. The patterns have been used in two applications with basic management functions namely add, edit, erase and search and the result obtained proves their re-usability and reliability.
6
Erdim, Hu¨seyin, and Horea T. Ilies¸. "Contact Analysis Between a Moving Solid and the Boundary of Its Swept Volume." In ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/detc2008-49447.
Full textAbstract:
The modeling of many practical problems in design and manufacturing involving moving objects relies on sweeps and their boundaries, which are mathematically described by the envelopes to the family of shapes generated by the moving object. In many problems, such as the design and analysis of higher pairs or tool path planning, contact changes between the moving object and the boundary of its swept volume become critical because they often translate into functional changes of the system under consideration. However, the difficulty of this task quickly escalates beyond the reach of existing approaches as the complexity of the shape and motion increases. We recently proposed a sweep boundary evaluator for general sweeps in conjunction with efficient point sampling and surface reconstruction algorithms that relies on our novel point membership classification (PMC) test for general solid sweeps. In this paper we describe a new approach that automates the prediction of changes in the state of contact between a shape of arbitrary complexity moving according to an affine motion, and the boundary of its swept set. We show that we can predict when and where such contact changes occur with only minimal additional computational cost by exploiting the data output by our sweep boundary evaluator. We discuss the problem and the associated computational issues in a 2D framework, and we conclude by discussing the extension of our approach to 3D moving objects.
7
Ramos, Juan Jose´, and Miquel A`ngel Piera. "PML: An Object-Oriented Language for Modelling Automation." In ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-59516.
Full textAbstract:
To cope with the growing demands for simulation models of ever increasing complex industrial systems, the research community effort has been mainly focused in creating different software tools which simplify the modeling process. This work describes how the Object-Oriented Modeling language PML (Physical Modeling Language) automates the modeling process by using physical knowledge in order to set the mathematical model of the system. PML introduces new modular structures to represent the physical knowledge required to model a system, making a clear separation between the physical behaviour representation (declarative knowledge) and the computational aspects of model simulation (procedural knowledge).
8
Gliozzi, Mario, Iossif Papadakis, and Wolfgang Brinkmann. "RXTE monitoring of the radio‐loud NLS1 galaxy PKS 0558‐504." In THE MULTICOLORED LANDSCAPE OF COMPACT OBJECTS AND THEIR EXPLOSIVE ORIGINS. American Institute of Physics, 2007. http://dx.doi.org/10.1063/1.2774947.
Full text
9
Klein, S. A. "IEEE/PES committee report object registration overview and status final report of the object registration working group." In 2006 IEEE Power Engineering Society General Meeting. IEEE, 2006. http://dx.doi.org/10.1109/pes.2006.1709144.
Full text
10
Imamura, Kousuke, Naoki Kubo, and Hideo Hashimoto. "Automatic moving object extraction using x-means clustering." In 2010 Picture Coding Symposium (PCS). IEEE, 2010. http://dx.doi.org/10.1109/pcs.2010.5702477.
Full textReports on the topic "PMS Objekt"
1
Koegler, Wendy S. One User's Report on Sandia Data Objects: Evaluation of the DOL and PMO for use in Future. Office of Scientific and Technical Information (OSTI), November 2003. http://dx.doi.org/10.2172/820203.
Full text
2
Koegler, Wendy S., and W. Philip, Jr Kegelmeyer. One user's report on Sandia data objects : evaluation of the DOL and PMO for use in feature characterization. Office of Scientific and Technical Information (OSTI), November 2003. http://dx.doi.org/10.2172/918321.
Full text