Relevant bibliographies by topics / Polyester Composite

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Polyester Composite'

Author: Grafiati
Published: 3 June 2025
Last updated: 23 June 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Polyester Composite.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Polyester Composite"

1

Nifant’ev, Ilya, Alexander Tavtorkin, Pavel Komarov, et al. "Dispersant and Protective Roles of Amphiphilic Poly(ethylene phosphate) Block Copolymers in Polyester/Bone Mineral Composites." International Journal of Molecular Sciences 24, no. 13 (2023): 11175. http://dx.doi.org/10.3390/ijms241311175.

Full text
Abstract:
Composites of synthetic bone mineral substitutes (BMS) and biodegradable polyesters are of particular interest for bone surgery and orthopedics. Manufacturing of composite scaffolds commonly uses mixing of the BMS with polymer melts. Melt processing requires a high homogeneity of the mixing, and is complicated by BMS-promoted thermal degradation of polymers. In our work, poly(L-lactide) (PLLA) and poly(ε-caprolactone) (PCL) composites reinforced by commercial β-tricalcium phosphate (βTCP) or synthesized carbonated hydroxyapatite with hexagonal and plate-like crystallite shapes (hCAp and pCAp, respectively) were fabricated using injection molding. pCAp-based composites showed advanced mechanical and thermal characteristics, and the best set of mechanical characteristics was observed for the PLLA-based composite containing 25 wt% of pCAp. To achieve compatibility of polyesters and pCAp, reactive block copolymers of PLLA or PCL with poly(tert-butyl ethylene phosphate) (C1 and C2, respectively) were introduced to the composite. The formation of a polyester-b-poly(ethylene phosphoric acid) (PEPA) compatibilizer during composite preparation, followed by chemical binding of PEPA with pCAp, have been proved experimentally. The presence of 5 wt% of the compatibilizer provided deeper homogenization of the composite, resulting in a marked increase in strength and moduli as well as a more pronounced nucleation effect during isothermal crystallization. The use of C1 increased the thermal stability of the PLLA-based composite, containing 25 wt% of pCAp. In view of positive impacts of polyester-b-PEPA on composite homogeneity, mechanical characteristics, and thermal stability, polyester-b-PEPA will find application in the further development of composite materials for bone surgery and orthopedics.
APA, Harvard, Vancouver, ISO, and other styles
2

Noor Najmi, Bonnia, Sahrim Haji Ahmad, Surip Siti Norasmah, S. S. Nurul, Noor Azlina Hassan, and Hazleen Anuar. "Mechanical Properties and Environmental Stress Cracking Resistance of Rubber Toughened Polyester/Clay Composite." Advanced Materials Research 576 (October 2012): 318–21. http://dx.doi.org/10.4028/www.scientific.net/amr.576.318.

Full text
Abstract:
Crosslinked polyester clay nanocomposites were prepared by dispersing originically modified montmorillonite in prepromoted polyester resin and subsequently crosslinked using methyl ethyl ketone peroxide catalyst at different clay concentration. Cure process and the mechanical properties of rubber toughened polyester clay composite have been studied. Rubber toughened thermoset polyester composite were prepared by adding 3 per hundred rubber (phr) of liquid natural rubber (LNR) was used in the mixing of producing this composite. Modification of polyester matrix was done due to the brittle problem of polyester composite. Addition of LNR will increase the toughness of composite and produce ductile polyester. Two types of composites were produced which is clay-lnr polyester composite and clay polyester composite. Addition of liquid natural rubber significantly increased the impact strength and flexural properties. Result shows that addition of 6% of clay-lnr composite give good properties on impact, strength and flexural. From the ESCR test, both composites showed good resistance to environmental.
APA, Harvard, Vancouver, ISO, and other styles
3

Karataş, Mukaddes, and Ercan Aydoğmuş. "Use of Inorganic Wastes as Fillers in Production of Polyester Composites and Evaluation of Properties of Obtained Composite." International Journal of Advanced Natural Sciences and Engineering Researches 7, no. 4 (2023): 20–24. http://dx.doi.org/10.59287/ijanser.538.

Full text
Abstract:
The use of industrial factory wastes as a filler in polymer composite materials is becoming more and more common. In this way, these wastes that cause environmental pollution are eliminated and new composite materials are developed. Polymer composites with low cost and high thermal stability are preferred in many sectors. In this research, some physical and chemical properties of inorganic waste reinforced polyester composites have been evaluated. The use of industrial inorganic wastes as fillers in polyester composites develops some thermophysical properties of composites. In particular, such industrial wastes are dried before being used in the composite, the particle size is reduced, and it is ensured to have a homogeneous structure. This type of waste, which is used as filler, is used in the polyester composite in optimum proportions. The use of high inorganic fillers in polyester both weakens the mechanical strength of the composites and negatively affects the matrix structure. Besides, inorganic waste reinforcement raises the surface hardness of polyester composites. Such fillers are improved both the thermal stability and non-flammability of the polyester composite. High-density inorganic fillers are used to obtain a high-density and economical polyester composite. Low-density inorganic industrial wastes also reduce the density of composites. However, the reinforcement of inorganic fillers into polyester at a high rate adversely affects both the surface morphology and the workability of the produced composites.
APA, Harvard, Vancouver, ISO, and other styles
4

Bello, T. K., M. O. Oladipo, A. Idris, F. B. Beka, U. P. Unachukwu, and A. Bukar. "Production of Reinforced Polyester Composite from Okra Fibre and Sawdust." Nigerian Journal of Technological Development 18, no. 4 (2022): 288–95. http://dx.doi.org/10.4314/njtd.v18i4.4.

Full text
Abstract:
This research presents properties of okra and sawdust reinforced polyester composite. The compatibility of the simple woven okra and sawdust with polyester was enhanced with stearic acid treatment. FTIR analysis confirmed decrease in hydrophilicity of the fibre and dust. Six composite samples; pure polyester, sawdust reinforced polyester composite, okra reinforced polyester composite, 10% sawdust in okra fibre reinforced composite, 20% sawdust in okra fibre reinforced composite and 30% sawdust in okra fibre reinforced composites were fabricated and characterized. The morphological analysis showed that the homogeneity of polyester in the samples reduces with increase in sawdust filler (10-30 wt%). Water absorption was highest (1.6%) in 30% sawdust in okra. The densities of all the composites were between 3.5 – 4.5 kg/m3. The sawdust reinforced composite recorded low impact energy of 0.25 J while the woven okra fibre reinforced polyester recorded the highest impact energy of 9.9 J. Hardness property reduced as the biomass content increased. Unreinforced polyester recorded the highest average elongation of 25% (1400 µm) and reduced elongation as filler increased. The storage modulus was highest for unreinforced composite at 40oC but as the temperature reached 81oC the storage modulus of unreinforced polyester dropped lower than the sawdust composite. The damping factor (1.41) was highest for 20 wt% sawdust/okra polyester composite. This research concludes that sawdust and okra are suitable for lightweight and energy damping materials in automobile applications.
APA, Harvard, Vancouver, ISO, and other styles
5

Karataş, Mukaddes, and Ercan Aydoğmuş. "Physical and Chemical Properties of Organic Waste Reinforced Polyester Composites." International Journal of Advanced Natural Sciences and Engineering Researches 7, no. 4 (2023): 16–19. http://dx.doi.org/10.59287/ijanser.536.

Full text
Abstract:
Organic wastes constitute an important part of environmental pollution. Disposal of these wastes can be achieved either by using recycling methods or as reinforcement material. In this study, research has been carried out on the use of organic wastes in composite materials. For example, the effects of organic fillers on the physical and chemical properties of polyester composites have been investigated. Organic wastes (biomass) are prepared as fillers after drying and grinding. Especially, biomass samples with a fibrous structure improve the mechanical properties of composites. The use of such organic wastes in polyester composites is preferred for obtaining both economical and low-density materials. However, such fillers should be used in optimum proportions in the composite. Because the use of these wastes at a high rate negatively affects both the surface morphology and the pore structure of polyester composites. Besides, the evaluation of these wastes in the production of polyester composites reduces the carbon footprint. Such fillers interact physically in the polyester composite. If no chemical modification is made, it does not react with polyester components and does not make a chemical bond. According to the evaluated results, it reduces the density and hardness of the polyester composite. Also, it decreases the thermal conductivity coefficient and thermal stability, albeit slightly.
APA, Harvard, Vancouver, ISO, and other styles
6

Ojha, Somanath, Himanshu Bisaria, Smita Mohanty, and Krishnan Kanny. "Static and dynamic mechanical analysis of e-glass polyester composite used in mass transit system." Emerging Materials Research 12, no. 1 (2023): 1–10. http://dx.doi.org/10.1680/jemmr.22.00092.

Full text
Abstract:
Composite materials have distinct properties such as a high strength-to-weight ratio, high corrosion resistance, a high modulus-to-weight ratio, and wear resistance. The potential, strong mechanical properties and lower cost properties of E-glass fibre motivated us for this work. Tensile, flexural, and Izod impact tests were used in the current study to conduct a static analysis of E-glass reinforced isophthalic polyester composite and E-glass reinforced general purpose (GP) or orthophthalic polyester composite. Thermal-mechanical behaviour was investigated using thermogravimetric analysis and dynamic mechanical analysis tests. Furthermore, the surface morphology of the tested composites was examined using a scanning electron microscope. When compared to E-glass reinforced GP polyester composite, E-glass/isophthalic polyester composite demonstrated superior flexural properties and thermal stability. However, the tensile and impact properties of E-glass/GP polyester composite were found to be higher than those of E-glass/isophthalic polyester composite. SEM images show fibre pull-out, matrix cracking, and fibre breakage, among other things. The loss modulus and damping values for E-glass reinforced GP polyester composite were found to be greater than those for E-glass reinforced isophthalic polyester composite. The current composite can be used in marine applications, particularly the hull: frame or body of the boat.
APA, Harvard, Vancouver, ISO, and other styles
7

Tioua, Tahar, Djamel Djeghader, and Bachir Redjel. "The Mechanical properties and statistical analysis of the Charpy impact test using the Weibull distribution in jute-polyester and glass-polyester composites." Frattura ed Integrità Strutturale 16, no. 62 (2022): 326–35. http://dx.doi.org/10.3221/igf-esis62.23.

Full text
Abstract:
In recent years, the use of natural fiber composites to provide a possible replacement for synthetic fiber composites for practical applications has been the subject of several studies. This study deals with the fabrication and investigation of jute-polyester composites and the comparison of it with glass-polyester composites. The static mechanical properties of the composites is obtained by testing the composite lamina for tensile and flexural strength. The dynamic mechanical properties of the composites is determined by using the Charpy impact test. By the Williams method based on the principle of linear elastic fracture mechanics, the impact toughness of the composites is deduced. The experimental results were statistically analyzed by using the Weibull theory to better understand the impact behavior of the composites. It is found that the glass-polyester composite has better properties than the jute-polyester composite.
APA, Harvard, Vancouver, ISO, and other styles
8

Sakthivel, S., S. Senthil Kumar, N. Mekala, and G. Dhanapriya. "Development of Sound Absorbing Recycled Nonwoven Composite Materials." IOP Conference Series: Materials Science and Engineering 1059, no. 1 (2021): 012023. http://dx.doi.org/10.1088/1757-899x/1059/1/012023.

Full text
Abstract:
Abstract The Sound absorbent textile materials, especially nonwoven composite structure of reclaimed materials which have low manufacturing costs, low relative density and are more attractive. In this research the use of reclaimed cotton and polyester fiber for production of sound absorption nonwoven composite materials has been investigated. Three different blend ratios of reclaimed cotton and polyester fibers that is 25:75, 40:60 and 50:50 have been used. The reclaimed cotton and polyester nonwoven composites are specified for their physical properties, such as thickness, areal density, bulk density, porosity and sound absorption characteristics in the frequency range of 250HZ-2KHZ. The values of the sound absorption coefficient and noise reduction coefficient acquired signifies that the reclaimed polyester fiber nonwoven composite holds excellent sound absorption behavior in the entire frequency range. Before compressed reclaimed cotton/polyester nonwoven composite of 25:75 blend ratios with greater bulk density and lower porosity is seen to give excellent performance while using the provided air gap behind the reclaimed cotton/polyester nonwoven composites.
APA, Harvard, Vancouver, ISO, and other styles
9

Kyzioł, Lesław, Katarzyna Panasiuk, Michał Barcikowski, and Grzegorz Hajdukiewicz. "The influence of manufacturing technology on the properties of layered composites with polyester–glass recyclate additive." Progress in Rubber, Plastics and Recycling Technology 36, no. 1 (2019): 18–30. http://dx.doi.org/10.1177/1477760619895003.

Full text
Abstract:
The article describes the technologies of recycling polyester–glass waste and the influence of manufacturing technology on the properties of layered composites with polyester–glass recyclate additive. Milled polyester–glass waste was used as the recyclate. Polyester–glass composites with a specific content of recyclate were manufactured by means of manual laminating and vacuum bagging. The influence of the recyclate content and manufacturing method on the mechanical properties of composites was determined with the aid of specimens exposed to static tensile testing. Test results indicated that the composite without recyclate additive manufactured by means of vacuum bagging exhibits higher strength properties than the same composite manufactured by means of manual laminating. Additionally, its plasticity is much higher than that of the composite manufactured by means of manual laminating. The tests indicated that the tensile properties of the composite are, essentially, influenced by the content of recyclate (apart from the manufacturing method). Adding recyclate to the manufactured composite in the amount of 10% and 20% causes a significant decrease in its tensile properties in relation to the composite without the recyclate.
APA, Harvard, Vancouver, ISO, and other styles
10

BHASKAR, K. B., V. SANTHANAM, and A. DEVARAJU. "DIELECTRIC STRENGTH ANALYSIS OF ACACIA NILOTICA WITH CHEMICALLY TREATED SISAL FIBER REINFORCED POLYESTER COMPOSITE." Digest Journal of Nanomaterials and Biostructures 15, no. 1 (2020): 107–13. http://dx.doi.org/10.15251/djnb.2020.151.107.

Full text
Abstract:
This work focuses on utilizing the chemically treated and untreated sisal fiber along with Acacia Nilotica as a secondary reinforcement in the polyester matrix. Composite specimens were prepared by using different volume percentage of the reinforcements. Dielectric properties of untreated and NaOH, KMnO4, C18H36O2 and C4H6O5 treated sisal fiber reinforced polyester composites were studied initially. Test results have shown that the composite material incorporated with 20% v/v treated sisal fiber has higher dielectric strength. Further investigations were carried out on the effect of the Acacia Nilotica natural filler in the Dielectric and water absorption properties of the sisal fiber/ polyester composite. The Composites were fabricated by incorporating the Acacia Nilotica filler in 5, 10, 15 and 20 volume percentages with the NaOH treated sisal fiber reinforced polyester composite. It is found that the addition of natural filler and surface treatment enhanced the dielectric properties of the composites.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Polyester Composite"

1

Haghdan, Shayesteh. "Energy absorbing ability of wood/polyester composite laminates." Thesis, University of British Columbia, 2015. http://hdl.handle.net/2429/54552.

Full text
Abstract:
Currently used energy absorbers in transportation industries are made of synthetic fiber/polymer composites as an alternative to their metal counterparts. These composites are stiff and strong but are somewhat brittle when subjected to impact load which limits their application when high energy absorbing ability is required. Wood, in contrast, has a high stiffness and strength to weight ratio and exhibits a higher deflection before failure. Despite the extensive research on the mechanical properties of synthetic fiber/polymer composites few researches are available on the effects of wood composite configuration and densification and its lamination set-up on its impact and compressive properties. This research focused on the use of wood in the form of thin veneer to reinforce polyester and composites of them were fabricated using hand lay-up and compression molding, in different thicknesses. Various wood configurations were used to create unidirectional, cross-ply, and woven mats. The effects of each mat configuration on the impact properties of wood/polyester composites and the lamination and curing processes were investigated and discussed. The gap of knowledge on the wettability of wood to the polyester resin was informed in this dissertation using contact angle measurements and roughness tests. Energy absorbing behavior and dominant fracture mechanisms of wood/polyester laminates subjected to quasi-static compression and shear loading were examined and the results were compared with the lab-made glass fiber/polyester composites. Findings of this study demonstrated that the effect of wood configuration on the impact properties of the polyester composites was significant. Wood densification improved the impact performance of composites but this improvement was not statistically significant. It was found that wood composites had an impact energy equivalent to that of glass fiber laminates.<br>Forestry, Faculty of<br>Graduate
APA, Harvard, Vancouver, ISO, and other styles
2

Fehervari, Sylvie. "Propriétés mécaniques d'une résine polyester, influence d'une pression de confinement : application à un composite polyéthylène-polyester." Lille 1, 1995. http://www.theses.fr/1995LIL10001.

Full text
Abstract:
La plasticité de la résine polyester a été évaluée en traction et en compression à vitesse de déformation constante et en fluage. L'analyse thermodynamique de la déformation à vitesse de déformation imposée indique que la barrière locale d'énergie <go à la propagation des microzones cisaillées est la même en traction et en compression. En outre, la différence des volumes d'activation dans ces deux modes de sollicitation traduit une différence de contrainte d'écoulement. Les cinétiques de fluage en traction et en compression sont exprimées par une loi de type =atm. Nous mettons en évidence le rôle joue par les mobilités moléculaires et le vieillissement physique sur le comportement en fluage du polyester. Comme pour les essais a vitesse de déformation constante, une différence de comportement entre traction et compression est observée. Des essais complémentaires de compression sous pression de confinement conduisent à rendre compte de l'ensemble de nos résultats expérimentaux par un critère de plasticité de Coulomb. La connaissance de la plasticité de réseau polyester permet, dans le cas des composites à fibres de polyéthylène et matrice polyester d'identifier les contributions respectives de la matrice et de renfort dans la réponse mécanique globale du matériau.
APA, Harvard, Vancouver, ISO, and other styles
3

Davallo, Mehran. "Mechanical behaviour of glass-polyester composite formed by resin transfer moulding." Thesis, Manchester Metropolitan University, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.301045.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

DESLANDES, NATHALIE. "Etude des interactions de solvants avec un materiau composite a matrice polyester." Paris, ENSAM, 1996. http://www.theses.fr/1996ENAM0018.

Full text
Abstract:
Le bmc (bulk molding compound) est un materiau composite injecte, a matrice polyester-styrene renforcee par des fibres de verre courtes et chargee en carbonate de calcium. Il est utilise dans l'industrie automobile pour la fabrication de panneaux de carrosserie. Lors de la mise en peinture, il apparait parfois des defauts d'aspect constitues par des macropores de quelques centaines de microns de diametre. Notre etude porte sur la comprehension du phenomene et les interactions entre le materiau composite et les solvants contenus dans les peintures. La compensation du retrait de la matrice est assuree par la creation de microvides/microfissures dont la taille est de l'ordre du micron. Contrairement a la composition globale du materiau, la taille et la distribution des microvides varient en fonction de la longueur d'ecoulement. Les concentrations des microvides et des macropores varient en sens oppose. Nous avons trace des cartes bidimensionnelles des parametres de solubilite permettant de predire l'activite d'un solvant quelconque envers le materiau composite
APA, Harvard, Vancouver, ISO, and other styles
5

Afzal, Muhammad Ali. "Development of a coaxial composite fiber." Thesis, Mulhouse, 2016. http://www.theses.fr/2016MULH0599/document.

Full text
Abstract:
Les filaments composites cœur/peau ont été développés dans le but de proposer des capteurs et de effecteurs textiles pour des applications « smart textiles ». Le filage des filaments a été effectué avec une technique de type extrudeuse à piston. Le travail a porté sur la modification d’une machine de filage par fusion, de la caractérisation de polymères, de la caractérisation des filaments développés et de l’optimisation des techniques d’obtention des filaments. La conception du procédé ainsi que son optimisation ont été effectués avec du PET. La modification de la machine a consisté à concevoir les filières, modifier le piston et à introduire un canal d’alimentation sous forme de tube en inox pour sécuriser le passage du filament métallique d’âme dans le four. Ainsi, 10 filières différentes et trois pistons ont été conçus en se fondant sur les règles industrielles puis leurs performances ont été optimisées. Les polymères ont été caractérisés par DSC, par rhéologie et par techniques analytiques. Ces résultats ont montré la forte influence de la température en particulier une forte réduction de la cristallinité du filament composite. L’optimisation des paramètres d’extrusion a pris en compte la vitesse du piston, la vitesse de bobinage, les modifications de la machine dont le nombre de trous des filières, la position du tube dans la filière, les dimensions internes du tube, le diamètre de sortie de la filière. Il a été montré que la conception de la filière a une influence significative sur la forme des filaments obtenus ainsi que sur la concentricité de l’âme. Les propriétés physiques, morphologiques, tribologiques et mécaniques des filaments ont été mesurés. Ainsi, les filaments ont des diamètres compris entre 350 et 500 µm et peuvent être de formes elliptique, triangulaire, rectangulaire ou circulaire et les meilleures propriétés mécaniques sont obtenues avec les filaments le plus réguliers tandis que les filaments irréguliers présentent un coefficient de frottement plus important. Les résultats concernant la rigidité en flexion se sont avérés peu fiables. A partir des paramètres optimisés, un filament composite de polymère ferroélectrique (PVDF 70%-TrFE 30%) avec une âme cuivre a été filé et a montré de parfaites caractéristiques de forme et de concentricité. Ce filament composite peut maintenant être utilisé pour développer des capteurs et des effecteurs, des transmetteurs de signaux, des boucliers électromagnétiques et de l’électronique intégrable dans les vêtements<br>A coaxial composite fiber has been developed for the intended application in textile based sensors, actuators and eletric signal transmissions in wearable textile products. The work focuses on melt extrusion machine modification, characterization of polymers, characterization of developed filaments and optimization techniques for obtaining required results. Melt extrusion machine has been used having piston based mechanism. The process design and optimization was done using polyester polymer. The machine modification includes design of spinnert, piston end modification and introduction of separate feeding channel for core filament in the oven. A number of 10 spinnerets designs were developed according to industrial die design rules and optimized for their performance. The piston end designs developed were 3 in number. A stainless steel tube has been introduced into the oven for a separate secure passage of core filament. The polymer characterization was done by thermal, rheological and analytical techniques. The obtained results exhibited thermal attibutes of the polymer and showed reduction in degree of crystallanity in composite filament. The optimization of extrusion parameters including piston speed, winding speed ; and modifications in machine which includes design parameters of number of holes, tube position, tube internal diameter and spinneret exit diameter were done. It was observed that design parameters have significant effect on cross-sectional shape, eccentricity of core and morphology of filament. The characterization of composite filament has been carried out by physical, morphological, mechanical, tribology and bending techniques. The composite filaments developed were in range of 350-500 µm diameter. The filaments developed have elliptical, triangular, rectangular and circular shapes. The regular filaments showed higher tenacity and breaking strength than irregular shaped filaments. The frictional coefficient values were found higher for irregular shapes. Bending stiffness results obtained were not reliable for irregular cross-sectional shapes. The optimized parameters wers used to develop composite filament using ferroelectric polymer (PVDF-TrFE) having 70 :30 ratio copolymer. The developed filament was very regular in shape with good eccentricity of core. The developed Cu/PVDF-TrFE core/sheath filament can be used for development of sensors and actuators. The Cu/Polyester core/sheath filament can be used for electrical signal transmission lines in wearable electronic textiles and for development of electromagnetic shielding effectiveness fabrics
APA, Harvard, Vancouver, ISO, and other styles
6

Kayatin, Matthew Jay Davis Virginia A. "Rheology, structure, and stability of carbon nanotube-unstaturated polyester resin dispersions." Auburn, Ala, 2008. http://hdl.handle.net/10415/1421.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Tsoi, Marvin S. "Modeling of thermal properties of fiber glass polyester resin composite under thermal degradation condition." Master's thesis, University of Central Florida, 2011. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/4711.

Full text
Abstract:
Composites, though used in a variety of applications from chairs and office supplies to structures of U.S. Navy ships and aircrafts, are not all designed to hold up to extreme heat flux and high temperature. Fiber-reinforced polymeric composites (FRPC) have been proven to provide the much needed physical and mechanical properties under fire exposure. FRPC notable features are its combination of high specific tensile strength, low weight, along with good corrosion and fatigue resistance. However FRPC are susceptible to thermal degradation and decomposition, which yields flammable gas, and are thus highly combustible. This property restricts polymeric material usage. This study developed a numerical model that simulated the degradation rate and temperature profiles of a fiber-reinforced polyester resin composite exposed to a constant heat flux and hydrocarbon fire in a cone calorimeter. A numerical model is an essential tool because it gives the composite designer the ability to predict results in a time and cost efficient manner. The goal of this thesis is to develop a numerical model to simulate a zonal-layer polyester resin and fiber-glass mat composite and then validate the model with experimental results from a cone calorimeter. By inputting the thermal properties of the layered composite of alternating polymer and polymer-infused glass fiber mat layers, the numerical model is one step closer to representing the experimental data from the cone calorimeter test. The final results are achieved through adding a simulated heat flux from the pilot ignition of the degraded gas of the polyester resin. The results can be coupled into a mechanical model, which may be separately constructed for future study on the mechanical strength of composites under fire conditions.<br>ID: 030646184; System requirements: World Wide Web browser and PDF reader.; Mode of access: World Wide Web.; Thesis (M.S.M.E.)--University of Central Florida, 2011.; Includes bibliographical references (p. 53-54).<br>M.S.M.E.<br>Masters<br>Mechanical and Aerospace Engineering<br>Engineering and Computer Science<br>Mechanical Engineering; Thermo-Fluids Track
APA, Harvard, Vancouver, ISO, and other styles
8

Smith, Kevin Jackson. "Compression creep of a pultruded E-glass/polyester composite at elevated service temperatures." Thesis, Georgia Institute of Technology, 2005. http://hdl.handle.net/1853/7195.

Full text
Abstract:
This thesis presents the results of an experimental investigation into the behavior of a pultruded E-glass/polyester fiber reinforced polymer (FRP) composite under sustained loads at elevated temperatures in the range of those that might be seen in service. This investigation involved compression creep tests of material coupons performed at a constant stress level of 33% of ultimate strength and three temperatures levels; 23.3°C (74°F), 37.7°F (100°F), and 54.4°C (130°F). The results of these experiments were used in conjunction with the Findley power law and the Time- Temperature Superposition Principle (TTSP) to formulate a predictive curve for the longterm creep behavior of these pultruded sections. Further experiments were performed to investigate the effects of thermal cycles in order to better simulate service conditions.
APA, Harvard, Vancouver, ISO, and other styles
9

Riopel, Sébastien. "Étude expérimentale de la cuisson d'un composite unidirectionnel verre/polyester de grande épaisseur." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp03/MQ53598.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Speake, Stephen David. "Prediction of the rate of degradation of a polyester glass composite by water." Thesis, Kingston University, 1986. http://eprints.kingston.ac.uk/20509/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Polyester Composite"

1

Stoĭko, Fakirov, ed. Handbook of thermoplastic polyesters: Homopolymers, copolymers, blends, and composites. Wiley-VCH, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

GangaRao, Hota V. S. Reinforced concrete design with FRP composites. CRC Press, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Narendra, Taly, and Vijay P. V, eds. Reinforced concrete design with FRP composites. CRC Press, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Tarvainen, Kyllikki. Occupational dermatoses from plastic composites based on polyester resins, epoxy resins and vinyl ester resins. Finnish Institute of Occupational Health, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Zhou, Weixing. The effects of spiro ortho carbonates on properties of unsaturated polyester resin and its fibre composites. National Library of Canada = Bibliothèque nationale du Canada, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Vapour: Pigment ink prints on aluminium composite panel and backlit polyester film, March 2-19, 2005. The Guild, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Thomas, Sabu, Mahesh Hosur, and Cintil Jose Chirayil. Unsaturated Polyester Resins: Blends, Interpenetrating Polymer Networks, Composites, and Nanocomposites. Elsevier, 2019.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Fakirov, Stoyko. Handbook of Thermoplastic Polyesters: Homopolymers, Copolymers, Blends and Composites. Wiley & Sons, Incorporated, John, 2020.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Fakirov, Stoyko. Handbook of Thermoplastic Polyesters: Homopolymers, Copolymers, Blends and Composites. Wiley & Sons, Limited, John, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Fakirov, Stoyko. Handbook of Thermoplastic Polyesters, Homopolymers, Copolymers, Blends and Composites. Wiley-VCH, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Polyester Composite"

1

Chidi Ezika, Anthony, Emmanuel Rotimi Sadiku, Suprakas Sinha Ray, Henry Chukwuka Oyeoka, Martin Emeka Ibenta, and Victor Ugochukwu Okpechi. "Wood Fiber-Reinforced Polyester Composite." In Polyester-Based Biocomposites. CRC Press, 2023. http://dx.doi.org/10.1201/9781003270980-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Thompson, S. J., R. T. Hartshorn, and J. Summerscales. "Strain Gauges on Glass Fibre Reinforced Polyester Laminates." In Composite Structures 3. Springer Netherlands, 1985. http://dx.doi.org/10.1007/978-94-009-4952-2_53.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Suriano, Raffaella, Andrea Mantelli, Gianmarco Griffini, Stefano Turri, and Giacomo Bonaiti. "Styrene-Free Liquid Resins for Composite Reformulation." In Systemic Circular Economy Solutions for Fiber Reinforced Composites. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-22352-5_6.

Full text
Abstract:
AbstractThree different classes of thermosetting styrene-free resins were investigated to assess their suitability to constitute the matrix phase in the reformulation of composites reinforced with mechanically recycled glass fibers. Resin reactivity and mechanical properties after curing were compared to commercial styrene-based, unsaturated polyester resins. The polymeric resin, acting as a binder, could be properly selected depending on the desired reactivity, processability, and mechanical behavior. Some prototypal examples of reformulated composites with different types and contents of recycled glass fibers were produced and mechanically tested. The combination of the epoxy resin with up to 60 wt% of mechanically recycled glass fibers resulted in an increase of elastic modulus up to 7.5 GPa.
APA, Harvard, Vancouver, ISO, and other styles
4

Mohamad Sakdun, Noor Syafeekha, Nur Azrin Azlan, Nik Farhanim Imran, and Hafizah Muhamad Azlan. "Tensile Strength of Polyester Composite Filled with Bamboo Fiber." In Charting the Sustainable Future of ASEAN in Science and Technology. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-3434-8_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Velde, K. Van de, and P. Kiekens. "Chemical resistance of pultruded E-glass reinforced polyester composites." In Recent Developments in Durability Analysis of Composite Systems. CRC Press, 2021. http://dx.doi.org/10.1201/9781003211181-58.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Mamo, Yesheneh Jejaw, and Ramesh Babu Subramanian. "Analysis of Flexural Strength of Jute/Sisal Hybrid Polyester Composite." In Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-15357-1_48.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Shaikh, A. A., and S. A. Channiwala. "Strength Prediction for Jute Polyester Composite for Transverse Fiber Reinforcement." In Materials Science Forum. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-462-6.799.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kelly, John F. "Some Geometric and Component Interaction Effects during the Axial Collapse of Glass/Polyester Tubes at Force Levels Compatible with Rail Vehicle Design." In Composite Structures 5. Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-1125-3_19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Easwara Prasad, G. L., B. S. Keerthi Gowda, and R. Velmurugan. "A Study on Mechanical Properties of Treated Sisal Polyester Composites." In Mechanics of Composite and Multi-functional Materials, Volume 6. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-63408-1_18.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Vaghela, Harpalsinh M., Nikunj V. Rachchh, and Dhaiwat N. Trivedi. "Mechanical Characterization and Acoustic Insulation of Wool-Polyester-Glass Hybrid Composite Material." In Composites Science and Technology. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-1854-3_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Polyester Composite"

1

Ramos Junior, Carlos Eduardo Alves, Murilo Carneiro Chagas, Stephanie Barbosa da Silva Matos, et al. "DEVELOPMENT OF POLYESTER COMPOSITE FOR DLC COATING ON WIND TURBINE BLADES." In X Simpósio Internacional de Inovação e Tecnologia. Editora Blucher, 2024. https://doi.org/10.5151/siintec2024-389415.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Pokaad, Alif Zulfakar bin, Nur Arif bin Nor Azman, Ramlee bin Adnan, and Ahmad Zaifazlin Zainordin. "Investigate the Crashworthiness Behavior of Polyester/Epoxy Composite Tubes Under Quasi-Static Loading." In 2024 Multimedia University Engineering Conference (MECON). IEEE, 2024. https://doi.org/10.1109/mecon62796.2024.10776378.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Prabhakaran, R. T. Durai, James Thomason, and Liu Yang. "Recycled glass fibre/polyester resin system - interface characterization." In Brazilian Conference on Composite Materials. Pontifícia Universidade Católica do Rio de Janeiro, 2018. http://dx.doi.org/10.21452/bccm4.2018.14.03.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Baila, Diana Irinel, Razvan Pacurar, and Ancuta Pacurar. "MECHANICAL BEHAVIORS OF POLYESTER RESINS REINFORCED WITH UNIFILO FIBERGLASS." In 22nd SGEM International Multidisciplinary Scientific GeoConference 2022. STEF92 Technology, 2022. http://dx.doi.org/10.5593/sgem2022/6.1/s24.05.

Full text
Abstract:
In the last years, composite materials are increasingly used in automotive, aeronautic, aerospace, construction applications. Composite materials have been used in aerospace in applications such as engine blades, brackets, interiors, nacelles, propellers/rotors, single aisle wings, wide body wings. The fields of use of composite materials have multiplied with the improvement of material properties, such as stability and adaptation to the environment, mechanical tests, wear resistance, moisture resistance, etc. The composite materials are classified concerning type of matrix materials, as metallic, polymeric and ceramic based composites and are grouped according to the reinforcement type as fibre, obtaining particulate and laminate composites. Production of a better material is made more likely by combining two or more materials with complementary properties. The best combination of strength and ductility may be accomplished in solids that consist of fibres embedded in a host material. Polyester is a suitable component for composite materials, as it adheres so readily to the particles, sheets, or fibres of the other components. The important properties of the reinforcing fibres are their high strength and high modulus of elasticity. For applications, as in automotive or in aeronautical domain, in which a high strength-to-weight ratio is important, non-metallic fibres such as fiberglass have a distinct advantage because of their low density. In general, the glass fibres content varied between 9 to 33% wt. in the composites. In this article, high-performance types of composite materials glass-epoxy and glasspolyester used in automotive domain will be analyzed, performing tensile and flexural tests and SEM analyzes.
APA, Harvard, Vancouver, ISO, and other styles
5

Rocha, Vinicius M. K., Heitor L. Ornaghi Júnior, Sandro C. Amico, Daniel M. Oliveira, and Kelly C. C. Benini. "DIFFERENT APPROCHES TO KINETICS DEGRADATION OF POLYESTER RESIN FROM RENEWABLE RESOURCES." In Brazilian Conference on Composite Materials. Pontifícia Universidade Católica do Rio de Janeiro, 2018. http://dx.doi.org/10.21452/bccm4.2018.04.02.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Cech, Vladimir, Adam Babik, Antonin Knob, and Erik Palesch. "Plasma polymers used for controlled interphase in polymer composites." In 13th International Conference on Plasma Surface Engineering September 10 - 14, 2012, in Garmisch-Partenkirchen, Germany. Linköping University Electronic Press, 2013. http://dx.doi.org/10.3384/wcc2.51-55.

Full text
Abstract:
The performance of fiber-reinforced composites is strongly influenced by the functionality of composite interphases. Sizing, i.e. functional coating (interlayer), is therefore tailored to improve the transfer of stress from the polymer matrix to the fiber reinforcement by enhancing fiber wettability, adhesion, compatibility, etc. The world market is dominated by glass reinforcement in unsaturated polyester. However, commercially produced sizing (wet chemical process) is heterogeneous with respect to the thickness and uniformity, and hydrolytically unstable. Companies search for new ways of solving the above problems. One of the alternative technologies is plasma polymerization. Plasma polymer films of hexamethyldisiloxane, vinyltriethoxysilane, and tetravinylsilane, pure and in a mixture with oxygen gas, were engineered as compatible interlayers for the glass fiber/polyester composite. The interlayers of controlled physicochemical properties were tailored using the deposition conditions with regard to the elemental composition, chemical structure, and Young’s modulus in order to improve adhesion bonding at the interlayer/glass and polyester/interlayer interfaces and tune the cross-linking of the plasma polymer. The optimized interlayer enabled a 6.5-fold increase of the short-beam strength compared to the untreated fibers. The short-beam strength of GF/polyester composite with the plasma polymer interlayer was 32% higher than that with commercial sizing developed for fiber-reinforced composites with a polyester matrix. The progress in plasmachemical processing of composite reinforcements enabled us to release a new conception of composites without interfaces.
APA, Harvard, Vancouver, ISO, and other styles
7

Lin, Chun-Liang, Timothy Loew, and C. Dharan. "Low-cost ceramic/polyester foam composite material." In 40th Structures, Structural Dynamics, and Materials Conference and Exhibit. American Institute of Aeronautics and Astronautics, 1999. http://dx.doi.org/10.2514/6.1999-1333.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bonnia, N. N., M. M. Mahat, S. N. Surip, H. Anuar, N. A. Hassan, and S. Ahmad. "Polyester/kenaf composite; effect of matrix modification." In 2012 IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA). IEEE, 2012. http://dx.doi.org/10.1109/isbeia.2012.6422940.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Sun, Xinyu, Yong Bai, Xiaojie Zhang, Chang Liu, and Jiannan Zhao. "Analysis of Polyester Reinforced Flexible Composite Pipe Under Internal Pressure." In ASME 2019 38th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/omae2019-95903.

Full text
Abstract:
Abstract In recent years, petroleum and natural gas industry technology continues to develop, so the market demand for polyester fiber reinforced flexible composite pipe is increasing. Polyester reinforced flexible composite pipe is widely used in practical production, which is based on thermoplastic material and winded by polyester fiber. Based on the anisotropic uniformity of polyester reinforced flexible composite pipes, this paper focuses on the mechanical behavior of flexible composite pipes under internal pressure. By using numerical analysis method, the stress-strain change and burst pressure model of polyester reinforced pipe under internal pressure are established. The short-term burst pressure test is carried out to obtain the burst pressure of the reinforced pipe. The finite element analysis software ABAQUS is used to establish finite element model for simulation analysis. According to the generated test data, the correctness of the finite element analysis results is verified. The sensitivity of winding angle and diameter-thickness ratio to the pressure was studied to further understand the mechanical properties of polyester reinforced composite pipe.
APA, Harvard, Vancouver, ISO, and other styles
10

Teixeira, Linconl A., Vilson D. L. Junior, Rosineide M. Leão, and Sandra Luz. "EFFECT OF FIBERS ALKALI TREATMENT ON THERMAL BEHAVIOUR OF CURAUÁ/ POLYESTER COMPOSITES." In Brazilian Conference on Composite Materials. Pontifícia Universidade Católica do Rio de Janeiro, 2018. http://dx.doi.org/10.21452/bccm4.2018.10.07.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Polyester Composite"

1

Guess, T. R., E. D. Jr Reedy, and M. E. Stavig. Characterization of E-glass/polyester woven fabric composite laminates and tubes. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/203488.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Thompson, David N., Robert W. Emerick, Alfred B. England, et al. Final Report: Development of Renewable Microbial Polyesters for Cost Effective and Energy-Efficient Wood-Plastic Composites. Office of Scientific and Technical Information (OSTI), 2010. http://dx.doi.org/10.2172/991213.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Thompson, David N., Robert W. Emerick, Alfred B. England, et al. Final Report: Development of Renewable Microbial Polyesters for Cost Effective and Energy- Efficient Wood-Plastic Composites. Office of Scientific and Technical Information (OSTI), 2010. http://dx.doi.org/10.2172/974527.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Polyester Composite' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography