Relevant bibliographies by topics / Polymer-abrasive tools

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Conference papers

Academic literature on the topic 'Polymer-abrasive tools'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Polymer-abrasive tools.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Polymer-abrasive tools"

1

BELOTSERKOVSKY, Marat A., Anastasia O. GRISHCHENKO, and Igor I. TARAN. "USING FLAME SPRAYING TECHNOLOGY IN THE MANUFACTURE OF TOOLS WITH ABRASIVE-CONTAINING POLYMER COATING." Mechanics of Machines, Mechanisms and Materials 4, no. 69 (2024): 88–96. https://doi.org/10.46864/1995-0470-2024-4-69-88-96.

Full text
Abstract:
The possibility of forming abrasive-containing coatings based on ultra-high molecular weight polyethylene by flame spraying has been studied. Using the method of differential scanning calorimetry, it is shown that in the process of gas-flame spraying, particles do not reach the temperature range of thermal-oxidative destruction, and the basic structure of UHMWPE is preserved. The dependence of the adhesion strength of abrasive-containing coatings on their cooling rate and the composition of the propane-air mixture has been determined. Spraying modes have been determined for coatings containing
APA, Harvard, Vancouver, ISO, and other styles
2

Abrashkevich, Yury, Hrigoriy Machyshyn, Oleksandr Marchenko, and Svitlana Komotska. "Mechanized processing of building equipment by abrasive working bodies." Gіrnichі, budіvelnі, dorozhnі ta melіorativnі mashini, no. 97 (July 29, 2021): 36–46. http://dx.doi.org/10.32347/gbdmm2021.97.0302.

Full text
Abstract:
Carrying out of the clearing operations at carrying out mechanized processing of construction equipment from paints and varnishes, rust, various kinds of pollution belongs to mass labour-consuming operations [1]. To carry out these operations, widespread use of hand-held machines, working bodies that have abrasive wheels and metal brushes. The versatility and versatility of these machines, combined with the correct selection of the desired abrasive work tool, can significantly accelerate and facilitate the performance of cleaning and grinding operations with the desired effect.
 However,
APA, Harvard, Vancouver, ISO, and other styles
3

Tamarkin, M. A., Eh Eh Tishchenko, A. V. Verchenko, and V. M. Troitskii. "Formation of surface layer quality under abrasive treatment of polymer-composite materials." Advanced Engineering Research 20, no. 3 (2020): 235–42. http://dx.doi.org/10.23947/2687-1653-2020-20-3-235-242.

Full text
Abstract:
Introduction. The study results of the abrasive processing of parts made of polymer-composite materials are presented. The features of processing polymer composites and the technology of preforming through waterjet cutting are described. The stages of preparation of a part made of polymer-composite material for the “glueing” operation are investigated.Materials and Methods. Dependences for determining the surface roughness under waterjet cutting of polymercomposite material are considered. Research is carried out to achieve the required surface roughness under adhesive bonding of workpieces. T
APA, Harvard, Vancouver, ISO, and other styles
4

Kumar S, Santhosh, and Somashekhar S. Hiremath. "Temperature-dependent rheological properties of viscoelastic polymer based flexible abrasive media for finishing process." Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 235, no. 4 (2021): 973–85. http://dx.doi.org/10.1177/0954408920987904.

Full text
Abstract:
The objective of the present investigation is to develop and study the thermal and rheological properties of the in-house developed flexible abrasive media. It is a mixer of viscoelastic polymer and plasticizer mixed with micro-abrasive particles, used for removing debris and irregularities present on internal and external complex surfaces used in the aerospace, automotive and medical industries. This paper presents, morphology of the developed abrasive media is captured using the Scanning Electron Microscope (SEM), thermal properties of the abrasive media are studied using Thermo Gravimetric
APA, Harvard, Vancouver, ISO, and other styles
5

Kapłonek, Wojciech, Krzysztof Nadolny, Krzysztof Rokosz, et al. "Internal Cylindrical Grinding Process of INCONEL® Alloy 600 Using Grinding Wheels with Sol–Gel Alumina and a Synthetic Organosilicon Polymer-Based Impregnate." Micromachines 11, no. 2 (2020): 115. http://dx.doi.org/10.3390/mi11020115.

Full text
Abstract:
The development of modern jet engines would not be possible without dynamically developed nickel–chromium-based superalloys, such as INCONEL® The effective abrasive machining of above materials brings with it many problems and challenges, such as intensive clogging of the grinding wheel active surface (GWAS). This extremely unfavorable effect causes a reduction in the cutting ability of the abrasive tool as well as increase to grinding forces and friction in the whole process. The authors of this work demonstrate that introduction of a synthetic organosilicon polymer-based impregnating substan
APA, Harvard, Vancouver, ISO, and other styles
6

Pavlo, Tryshyn, Honchar Natalia, Kondratiuk Eduard, and Stepanov Dmytro. "Development of technological restrictions when operating disc polymer-abrasive brushes." Eastern-European Journal of Enterprise Technologies 6, no. 1(108) (2020): 27–33. https://doi.org/10.15587/1729-4061.2020.212820.

Full text
Abstract:
Polymer-abrasive brush rotating tools are increasingly used for finishing operations in automated manufacturing. Given this, studying the process of their fibers’ wear has become important; and such a type of wear as the detachment of a whole fiber at the point of fixing has not been investigated in detail up to now. This phenomenon can lead to the disruption of stable equipment operation and the catastrophic wear of brushes. Therefore, it is a relevant task to search for and identify those limitations that could prevent fibers from detachment. This study involved the disc and cylindrica
APA, Harvard, Vancouver, ISO, and other styles
7

Ji, Shi Ming, Xi Zeng, and Ming Sheng Jing. "Soft-Consolidation Abrasives Pneumatic Wheel Technology Oriented to Finishing of High-Hardness Free-Form Surface." Key Engineering Materials 523-524 (November 2012): 149–54. http://dx.doi.org/10.4028/www.scientific.net/kem.523-524.149.

Full text
Abstract:
In order to improve the efficiency of high-hardness laser strengthening mold polishing, especially to the free-form surface, a new precision finishing method based on soft-consolidation abrasives pneumatic wheel is brought forward. The pneumatic wheel is constituded by flexible rubber maxtrix, combined with the robbet control. The abrasives group is bond to the rubber matrix by the polymer binder. In the way, compared with those free abrasives used in other polishing method, the soft-consolidation abrasives can get more stable surpport from nearby polymer to form effective cutting. On the othe
APA, Harvard, Vancouver, ISO, and other styles
8

Prajwal, H. V., Wasif Mumtaz Wani, Madhav Murthy, and S. Srinivas. "Machinability and Delamination Studies on Glass Fiber Reinforced Polymer Matrix Composite Cut by Abrasive Water Jet Machine." Solid State Phenomena 305 (June 2020): 122–28. http://dx.doi.org/10.4028/www.scientific.net/ssp.305.122.

Full text
Abstract:
Abrasive water jet machining possesses inherent technological and manufacturing advantages unmatched by most machine tools. They are generally used in automotive, marine and aerospace industries for machining of composites. However, abrasive water jet cutting of GFRP laminates possesses several challenges, such as surface finish and delamination of the cutspecimen. Henceforth, more experimental work is needed to provide sufficient machinability databases for manufacturing industries. This paper presents an experimental study for cutting GFRP laminates. Different AWJM conditions including press
APA, Harvard, Vancouver, ISO, and other styles
9

Han, Sheng Chao, Yan Chen, Jiu Hua Xu, and Jing Wen Zhou. "Experimental Study of Tool Wear in Milling Multidirectional CFRP Laminates." Materials Science Forum 770 (October 2013): 276–80. http://dx.doi.org/10.4028/www.scientific.net/msf.770.276.

Full text
Abstract:
This study aims to investigate the wear of coated end mills when milling Carbon fiber reinforced polymer (CFRP) composites. Four different types of end mills are used in the milling experiments to identify the influence of tool geometry and material on tool wear. Cutting forces and wear mechanisms of coated mills are also discussed. Through the contrast experiment, diamond coated multitooth router shows the best performance with the smallest cutting force and the least wear extent under the same cutting parameter. The major failure mechanisms of coated tools are breakthrough of coating, coatin
APA, Harvard, Vancouver, ISO, and other styles
10

Kepczak, Norbert, Piotr Zgorniak, Paweł Lajmert, Radoslaw Rosik, and Malgorzata Sikora. "Influence of machining parameters on the polymer concrete milling process." International Journal of Advanced Manufacturing Technology 106, no. 7-8 (2020): 3017–32. http://dx.doi.org/10.1007/s00170-019-04811-x.

Full text
Abstract:
AbstractThe paper examines the wear of end mill cutters, the parameters of a workpiece’s surface layer and the values of cutting forces during the machining of polymer concrete, which is one of the most difficult-to-cut materials. Increased abrasive wear of the active cutting edges is a result of the heterogeneous structure of this material, and it has a negative effect on the cutting process, the durability of the cutting tools as well as the roughness of the workpiece. It is very important to determine the machining parameters for this material from a tool durability and quality of machining
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Polymer-abrasive tools"

1

Степанов, Д. Н. "Повышение качества финишной обработки сложнопрофильных деталей, изготовленных из различных материалов, и ее механизация при помощи щеточных полимерно-абразивных инструментов". Thesis, Сумский государственный университет, 2014. http://essuir.sumdu.edu.ua/handle/123456789/38142.

Full text
Abstract:
В настоящее время одной из проблем машиностроительного производства является повышение качества и производительности финишного этапа изготовления деталей. Особенные трудности вызывают сложнопрофильные детали, требующие точного позиционирования инструмента по отношению к обрабатываемой поверхности, и тонкостенные детали, которые нельзя подвергать высокому силовому давлению. Финишная обработка таких деталей вызывает необходимость применения или дорогостоящего специального оборудования, или ручного труда различной степени тяжести, который к тому же является продолжительным и монотонным, и требует
APA, Harvard, Vancouver, ISO, and other styles
2

Внуков, Ю. Н., та Д. Н. Степанов. "Шероховатость поверхностей титановых образцов после обработки полимерно-абразивным инструментом". Thesis, Видавництво СумДУ, 2010. http://essuir.sumdu.edu.ua/handle/123456789/11261.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Du, Chih-wei, and 杜致緯. "Studies on the electrochemical abrasive polishing of cylindrical rod using a conductive polymer tool." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/5gy558.

Full text
Abstract:
碩士<br>國立中山大學<br>機械與機電工程學系研究所<br>102<br>In this study, a carbon-fiber-type non-directional conductive polymer (ESD 410C) was employed as a tool electrode to compositely electrolyze and abrasive polish the cylindrical surface of stainless steel workpiece using a horizontal electrochemical abrasive polishing machine self-developed. The effects of alumina abrasive particle size (1 ~ 9 μm), load (0.015 ~ 0.15 N), current (0 ~ 300 mA) and polishing time (0 ~ 10 min) on the surface roughness of workpiece were investigated. Experimental results of abrasive polishing showed that the surface roughness R
APA, Harvard, Vancouver, ISO, and other styles
4

Lee, Yu, and 李昱. "Studies of Electrochemical Abrasive Polishing on the Cylindrical Surface of Aluminum Using Conductive Polymer Tool." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/25514026468869412924.

Full text
Abstract:
碩士<br>國立中山大學<br>機械與機電工程學系研究所<br>104<br>Pure aluminum is often applied in various advanced industry due to its excellent mechanical properties. Two polishing methods are usually used, including chemical polishing and electro-polishing, but the solutions used by them are generally toxic and not recyclable. In this study, a non-toxic electrolyte is used to conduct the electrolytic polishing and the composite electrolytic abrasive polishing. In the electrolytic experiments for aluminum plate, the phosphoric acid and ethanol solution is the optimal electrolyte to obtain the best surface roughness.
APA, Harvard, Vancouver, ISO, and other styles
5

Hung, Wei-Kang, and 洪維綱. "Studies of Electrochemical Abrasive Polishing on Inner Surface of Alloy Steel using a Conductive Polymer Tool." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/43919398149790886408.

Full text
Abstract:
碩士<br>國立中山大學<br>機械與機電工程學系研究所<br>103<br>In this study, a horizontal machining was employed to compositely electrolytic-abrasive polish the inner surface of Cr-Mo alloy steel, where a carbon-fiber-type non-directional conductive polymer (ESD 410C) as a tool electrode and alumina (Al2O3) as abrasives with sodium sulfate as the electrolyte. Effects of grit size (1, 3, 5 µm), load (0.05, 0.15, 0.25 N), and current (0 ~ 300 mA) on the surface roughness of workpiece were investigated. Experimental results of abrasive polishing with non-feeding condition showed that the surface roughness Rmax and Ra w
APA, Harvard, Vancouver, ISO, and other styles
6

Chuang, Yi-ting, and 莊貽婷. "Studies on Electrolytic Abrasive Polishing of Square Inner Surface of Die Steel Using Conductive Polymer Tool." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/j29c36.

Full text
Abstract:
碩士<br>國立中山大學<br>機械與機電工程學系研究所<br>106<br>In this study, a square shape of conductive polymer (ESD 410C) was employed as a tool electrode to electrolytic abrasive polishing the inner surface of SKD61 steel with the square hole 12 and 8 mm in length using a polishing machine with multi-axis motions. Experiments were carried out to understand effects of the alumina abrasive particle size (3, 1, and 0.3 μm), load (0.3 ~ 0.5 N), current (0 ~ 200 mA) and polishing time (0 ~ 8 min) on the surface roughness of the polished surface. In the abrasive polishing under a load of 0.4 N and the abrasive size of
APA, Harvard, Vancouver, ISO, and other styles
7

Chen, Jin-Qian, and 陳晉虔. "Studies on Electrolytic Composite Abrasive Polishing of Cylindrical Surface Using Conductive Polymer Tool with Self-electrolytic Dressing." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/2a373p.

Full text
Abstract:
碩士<br>國立中山大學<br>機械與機電工程學系研究所<br>107<br>When the round rod workpiece of SUS 304 stainless steel is polished, it causes problems with residual microchips of metal on the tool surface. In order to solve these problems, composite electrolytic abrasive polishing machine with self-electrolytic dressing is designed and fabricated. Effects of load (0.05 N~0.25 N), abrasive particle size (1~3 μm), current (0~300 mA), NaNO3 electrolyte concentration (0~40 wt.%), dressing current (0~600 mA) and processing time (0~10 min) on the surface roughness of workpiece are investigated. In the electrolyti
APA, Harvard, Vancouver, ISO, and other styles
8

Lee, Chih-hung, and 李智弘. "Studies of Electrochemical Abrasive Polishing on the Inner Surface of Hole of Die Steel Using Conductive Polymer Tool." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/30042849163134653098.

Full text
Abstract:
碩士<br>國立中山大學<br>機械與機電工程學系研究所<br>104<br>Abstract In this study, a conductive polymer (ESD 410C) was employed as a tool electrode to compositely electrolyze and abrasive polish the inner surface of workpiece made of SKD61 die steel using a polishing machine with multi-axis motions. The effects of tool electrode shape (cylindrical and square thread), alumina abrasive particle size (3, 1, and 0.3 μm), load (0.1 ~ 0.5 N), current (0 ~ 600 mA), and polishing time (0 ~ 10 min) on the inner surface roughness of workpiece were investigated. In the electrolytic polishing, the decreased rate of surface r
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Polymer-abrasive tools"

1

Beamish, Michael, and William Corbett. "Correlating Qualitative Surface Profile Assessment Methods to Quantitative Methodology on Prepared Concrete." In CONFERENCE 2022. AMPP, 2022. https://doi.org/10.5006/c2022-17606.

Full text
Abstract:
Abstract Proper bonding of coatings and linings to concrete surfaces requires proper cleaning and frequently requires the concrete to be roughened to increase the surface area. The roughness, also known as surface profile, can be imparted into concrete by abrasive blast cleaning, acid etching, or various impact/scarifying power tools. The resulting surface profile depth can influence coating/lining adhesion and performance. Coating/lining manufacturers and/or facility owners frequently specify cleaning and roughening of the concrete surface prior to product installation. The surface profile (r
APA, Harvard, Vancouver, ISO, and other styles
2

Podashev, D. "Control of Deformation of Elastic Polymer-Abrasive Circles at their Wear." In Modern Trends in Manufacturing Technologies and Equipment. Materials Research Forum LLC, 2022. http://dx.doi.org/10.21741/9781644901755-58.

Full text
Abstract:
Abstract. The article is devoted to the study of the wear intensity of elastic polymer-abrasive circles when processing the surfaces of parts made of high-strength aluminum alloys. Empirical dependencies of wear on cutting speed and tool deformation are obtained, on the basis of which method of tool deformation correction with long-term, continuous surface treatment is proposed. In practice, such a procedure is necessary due to the loss of process performance that occurs due to the reduction of tool deformation due to wear. The proposed technique allows to effectively control the finishing pro
APA, Harvard, Vancouver, ISO, and other styles
3

Barone, D., G. Stanziale, A. Lamarina, et al. "Successful Deployment of Combined Mechanical and Chemical Solutions Enabled by Real-Time Coiled Tubing Services to Address Watered Out Well in Southern Europe." In ADIPEC. SPE, 2024. http://dx.doi.org/10.2118/222482-ms.

Full text
Abstract:
Abstract An innovative intervention strategy is discussed, which was designed to enhance precision and reliability and optimize the performance of a well plagued by excessive water production. Through the unique combination of a mechanical tool, custom chemistry, and state-of-the-art real-time technology, the operator successfully isolated the old, completely watered-out zone and opened a new layer to deliver sustained oil production with 0% water cut (WC). This well presented several challenges; the main one was to ensure effective and reliable isolation of old layers, both inside and outside
APA, Harvard, Vancouver, ISO, and other styles
4

Yudin, A., M. Dawoud, W. Arshad, et al. "Addressing Multiple Challenges of Hydraulic Fracturing in HPHT Sandstone Reservoirs. A Case Study from Saudi Arabia." In SPE Conference at Oman Petroleum & Energy Show. SPE, 2025. https://doi.org/10.2118/224877-ms.

Full text
Abstract:
Abstract Hydraulic fracturing in tight and deep gas formations presents significant challenges, particularly when near-wellbore stresses reduce injectivity. Drilling fluids can exacerbate near-wellbore damage, increasing rock breakdown limits alongside high local stresses. This study aimed to identify the main contributing factors and propose a comprehensive workflow to minimize occurrences and non-productive time (NPT) associated with these challenges. It also addressed the optimization of fracturing fluid design based on tubulars and formation cool-down effects. The study was based on statis
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Polymer-abrasive tools' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography