Relevant bibliographies by topics / Pool boiling

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Pool boiling'

Author: Grafiati
Published: 4 June 2021
Last updated: 16 June 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Pool boiling.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Pool boiling"

1

Wadekar, Vishwas V., and John G. Collier. "2.7.2 BOILING AND EVAPORATION: Pool boiling." Heat Exchanger Design Updates 5, no. 1 (1998): 24. http://dx.doi.org/10.1615/heatexchdesignupd.v5.i1.30.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kamel, Mohammed Saad, and Ferenc Lezsovits. "Experimental Study on Pool Boiling Heat Transfer Performance of Magnesium Oxide Nanoparticles Based Water Nanofluid." Pollack Periodica 15, no. 3 (2020): 101–12. http://dx.doi.org/10.1556/606.2020.15.3.10.

Full text
Abstract:
This study aims to experimentally investigate the nucleate pool boiling heat transfer performance of magnesium oxide nanoparticles MgO based deionized water nanofluid at the atmospheric pressure condition. Dilute volumetric concentrations within a range of 0.001% to 0.01% Vol. were used to examine the pool boiling heat transfer performance represented by pool boiling curve, and pool boiling heat transfer coefficient. The heating element was a horizontal copper heated tube with a typical diameter 22 mm submerged inside the cubic boiling chamber. Efforts have been made to measure the surface temperatures along the heated tube to ensure the proper and accurate heat transfer coefficient calculations in this work. The results indicated that the pool boiling heat transfer coefficient enhancement ratio (PBHTC /PBHTC ) was intensified for volume fractions i.e. 0.001%, 0.004%, and 0.007% Vol. while it was degraded for volume concentrations i.e. 0.01%, and 0.04% Vol. compared to deionized water as baseline case.
APA, Harvard, Vancouver, ISO, and other styles
3

Wang, Cong, Yalong Kong, Zhigang Liu, Lin Guo, and Yawei Yang. "A Novel Pressure-Controlled Molecular Dynamics Simulation Method for Nanoscale Boiling Heat Transfer." Energies 16, no. 5 (2023): 2131. http://dx.doi.org/10.3390/en16052131.

Full text
Abstract:
Pool boiling, enabling remarkable phase-change heat transfer, has elicited increasing attention due to its ubiquitous applications in solar thermal power stations. An explicit understanding of the effect of system pressure on pool boiling is required to enhance the phase-change heat transfer. Despite its wide application when exploring the potential mechanism of boiling, the molecular dynamics method still needs to be improved when discussing the working mechanism of system pressure. Therefore, in the present study, a novel molecular dynamics simulation method of nanoscale pool boiling was proposed. This method provides a way to change and control pressure during the phase-change process. Furthermore, the bubble nucleation and growth in nanoscale pool boiling are quantitatively investigated through pressure-control molecular dynamics simulations. We expect that this study will improve the present simulation method of pool boiling and provide useful insights to the physics of the process.
APA, Harvard, Vancouver, ISO, and other styles
4

Hegde, Ramakrishna, Shrikantha Rao, and Ranapratap Reddy. "Flow visualization and study of CHF enhancement in pool boiling with Al2O3 - Water nano-fluids." Thermal Science 16, no. 2 (2012): 445–53. http://dx.doi.org/10.2298/tsci100511095h.

Full text
Abstract:
Pool boiling heat transfer characteristics of Al2O3-Water nanofluids is studied experimentally using a NiCr test wire of 36 SWG diameter. The experimental work mainly concentrated on i) change of Critical Heat Flux(CHF) with different volume concentrations of nanofluid ii) flow visualization of pool boiling using a fixed concentration of nanofluid at different heat flux values. The experimental work revealed an increase in CHF value of around 48% and flow visualization helped in studying the pool boiling behaviour of nanofluid. Out of the various reasons which could affect the CHF enhancement, surface roughness plays a major role in pool boiling heat transfer.
APA, Harvard, Vancouver, ISO, and other styles
5

Baldwin, Michael, Ali Ghavami, S. Mostafa Ghiaasiaan, and Alok Majumdar. "Critical heat flux of liquid hydrogen, liquid methane, and liquid oxygen: a review of available data and predictive tools." IOP Conference Series: Materials Science and Engineering 1301, no. 1 (2024): 012165. http://dx.doi.org/10.1088/1757-899x/1301/1/012165.

Full text
Abstract:
Abstract Available experimental data dealing with critical heat flux (CHF) of liquid hydrogen (LH2), liquid methane (LCH4), and liquid oxygen (LO2) in pool and flow boiling are compiled. The compiled data are compared with widely used correlations. Experimental pool boiling CHF data for the aforementioned cryogens are scarce. Based on only 25 data points found in five independent sources, the correlation of Sun and Lienhard (1970) is recommended for predicting the pool CHF of LH2. Only two experiments with useful CHF data for the pool boiling of LCH4 could be found. Four different correlations including the correlation of Lurie and Noyes (1964) can predict the pool boiling CHF of LCH4 within a factor of two for more than 70% of the data. Furthermore, based on the 19 data points taken from only two available sources, the correlation of Sun and Lienhard (1970) is recommended for the prediction of pool CHF of LO2. Flow boiling CHF data for LH2 could be found in seven experimental studies, five of them from the same source. Based on the 91 data points, it is suggested that the correlation of Katto and Ohno (1984) be used to predict the flow CHF of LH2. No useful data could be found for flow boiling CHF of LCH4 or LO2. The available databases for flow boiling of LCH4 and LO2 are generally deficient in all boiling regimes. This deficiency is particularly serious with respect to flow boiling.
APA, Harvard, Vancouver, ISO, and other styles
6

Kruse, C., A. Tsubaki, C. Zuhlke, et al. "Secondary pool boiling effects." Applied Physics Letters 108, no. 5 (2016): 051602. http://dx.doi.org/10.1063/1.4941081.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Bergles, Arthur E. "Enhancement of pool boiling." International Journal of Refrigeration 20, no. 8 (1997): 545–51. http://dx.doi.org/10.1016/s0140-7007(97)00063-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Abe, Yoshiyuki, and Akira Iwasaki. "Pool boiling under microgravity." Advances in Space Research 13, no. 7 (1993): 165–68. http://dx.doi.org/10.1016/0273-1177(93)90368-l.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Qi, Yusen, and James F. Klausner. "Comparison of Nucleation Site Density for Pool Boiling and Gas Nucleation." Journal of Heat Transfer 128, no. 1 (2005): 13–20. http://dx.doi.org/10.1115/1.2130399.

Full text
Abstract:
It has been well established that the rate of heat transfer associated with boiling systems is strongly dependent on the nucleation site density. Over many years attempts have been made to predict nucleation site density in boiling systems using a variety of techniques. With the exception of specially prepared surfaces, these attempts have met with little success. This paper presents an experimental investigation of nucleation site density measured on roughly polished brass and stainless steel surfaces for gas nucleation and pool boiling over a large parameter space. A statistical model used to predict the nucleation site density in saturated pool boiling is also investigated. The fluids used for this study, distilled water and ethanol, are moderately wetting and highly wetting, respectively. Using distilled water it has been observed that the trends of nucleation site density versus the inverse of the critical radius are similar for pool boiling and gas nucleation. The nucleation site density is higher for gas nucleation than for pool boiling. An unexpected result has been observed with ethanol as the heat transfer fluid, which casts doubt on the general assumption that heterogeneous nucleation in boiling systems is exclusively seeded by vapor trapping cavities. Due to flooding, few sites are active on the brass surface and at most two are active on the stainless steel surface during gas nucleation experiments. However, nucleation sites readily form in large concentration on both the brass and stainless steel surfaces during pool boiling. The pool boiling nucleation site densities for ethanol on rough and mirror polished brass surfaces are also compared. It shows that there is not a significant difference between the measured nucleation site densities on the smooth and rough surfaces. These results suggest that, in addition to vapor trapping cavities, another mechanism must exist to seed vapor bubble growth in boiling systems.
APA, Harvard, Vancouver, ISO, and other styles
10

Sakurai, A., M. Shiotsu, and K. Hata. "A General Correlation for Pool Film Boiling Heat Transfer From a Horizontal Cylinder to Subcooled Liquid: Part 1—A Theoretical Pool Film Boiling Heat Transfer Model Including Radiation Contributions and Its Analytical Solution." Journal of Heat Transfer 112, no. 2 (1990): 430–40. http://dx.doi.org/10.1115/1.2910396.

Full text
Abstract:
A rigorous numerical solution of a theoretical model based on laminar boundary layer theory for pool film boiling heat transfer from a horizontal cylinder including the contributions of liquid subcooling and radiation from the cylinder was obtained. The numerical solution predicted accurately the experimental results of pool film boiling heat transfer from a horizontal cylinder in water with high radiation emissivity for a wide range of liquid subcooling in the range of nondimensional cylinder diameters around 1.3, where the numerical solution was applicable to the pool film boiling heat transfer from a cylinder with negligible radiation emissivity. An approximate analytical solution for the theoretical model was also derived. It was given by the sum of the pool film boiling heat transfer coefficient if there were no radiation and the radiation heat transfer coefficient for parallel plates multiplied by a nondimensional radiation parameter similar to the expression for saturated pool film boiling given by Bromley. The approximate analytical solution agreed well with the rigorous numerical solution for various liquids of widely different physical properties under wide ranges of conditions.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Pool boiling"

1

Sriraman, Sharan Ram. "Pool boiling on nano-finned surfaces." [College Station, Tex. : Texas A&M University, 2007. http://hdl.handle.net/1969.1/ETD-TAMU-2091.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Pascual, Christopher C. "EHD enhancement of nucleate pool boiling." Diss., Georgia Institute of Technology, 1999. http://hdl.handle.net/1853/19027.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ghiu, Camil-Daniel. "Pool Boiling from Enhanced Structures under Confinement." Diss., Georgia Institute of Technology, 2007. http://hdl.handle.net/1853/16229.

Full text
Abstract:
A study of pool boiling of a dielectric liquid (PF 5060) from single-layered enhanced structures was conducted. The parameters investigated were the heat flux, the width of the microchannels and the microchannel pitch. The boiling performance of the enhanced structures increases with increase in channel width and decrease in channel pitch. Simple single line curve fits are provided as a practical way of predicting the data over the entire nucleate boiling regime. The influence of confinement on the thermal performance of the enhanced structures was also assessed. The main parameter investigated was the top space (0 mm { 13 mm). High-speed visualization was used as a tool . For the total confinement ( = 0 mm), the heat transfer performance of the enhanced structures was found to depend weakly on the channel width. For >0 mm, the enhancement observed for plain surfaces in the low heat fluxes regime is not present for the present enhanced structure. The maximum heat flux for a prescribed 85 oC surface temperature limit increased with the increase of the top spacing, similar to the plain surfaces case. Two characteristic regimes of pool boiling have been identified and described: isolated flattened bubbles regime and coalesced bubbles regime. A semi-analytical predictive model applicable to pool boiling under confinement is developed. The model requires a limited number of empirical constants and is capable of predicting the experimental heat flux within 30%.
APA, Harvard, Vancouver, ISO, and other styles
4

Rice, Elliott Charles. "Sub-Cooled Pool Boiling Enhancement with Nanofluids." Scholar Commons, 2011. http://scholarcommons.usf.edu/etd/3310.

Full text
Abstract:
Phase-change heat transfer is an important process used in many engineering thermal designs. Boiling is an important phase change phenomena as it is a common heat transfer process in many thermal systems. Phase change processes are critical to thermodynamic cycles as most closed loop systems have an evaporator, in which the phase change process occurs. There are many applications/processes in which engineers employ the advantages of boiling heat transfer, as they seek to improve heat transfer performance. Recent research efforts have experimentally shown that nanofluids can have significantly better heat transfer properties than those of the pure base fluids, such as water. The objective of this study is to improve the boiling curve of de-ionized water by adding aluminum oxide nanopthesiss in 0.1%, 0.2%, 0.3% and 0.4% wt concentrations in a sub-cooled pool boiling apparatus. Enhancement to the boiling curve can be quantified in two ways: (i) the similar heat fluxes of de-ionized water at smaller excess temperature, indicating similar quantity of heat removal at lower temperatures and (ii) greater heat fluxes than de-ionized water at similar excess temperatures indicating better heat transfer at similar excess temperatures. In the same fashion, the secondary objective is to increase the convective heat transfer coefficient due to boiling by adding different concentrations of aluminum oxide nanopthesiss.
APA, Harvard, Vancouver, ISO, and other styles
5

Bertsch, George M., Stephen B. Memory, and P. J. Marto. "Nucleate pool boiling characteristics of R-124." Thesis, Monterey, California: Naval Postgraduate School, 1993. http://hdl.handle.net/10945/24202.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kim, Sung Joong Ph D. Massachusetts Institute of Technology. "Pool boiling heat transfer characteristics of nanofluids." Thesis, Massachusetts Institute of Technology, 2007. http://hdl.handle.net/1721.1/41306.

Full text
Abstract:
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Nuclear Science and Engineering, 2007.<br>Includes bibliographical references (leaves 79-83).<br>Nanofluids are engineered colloidal suspensions of nanoparticles in water, and exhibit a very significant enhancement (up to 200%) of the boiling Critical Heat Flux (CHF) at modest nanoparticle concentrations (50.1% by volume). Since CHF is the upper limit of nucleate boiling, such enhancement offers the potential for major performance improvement in many practical applications that use nucleate boiling as their prevalent heat transfer mode. The nuclear applications considered are main reactor coolant for PWR, coolant for the Emergency Core Cooling System (ECCS) of both PWR and BWR, and coolant for in-vessel retention of the molten core during severe accidents in high-power-density LWR. To implement such applications it is necessary to understand the fundamental boiling heat transfer characteristics of nanofluids. The nanofluids considered in this study are dilute dispersions of alumina, zirconia, and silica nanoparticles in water. Several key parameters affecting heat transfer (i.e., boiling point, viscosity, thermal conductivity, and surface tension) were measured and, consistently with other nanofluid studies, were found to be similar to those of pure water. However, pool boiling experiments showed significant enhancements of CHF in the nanofluids. Scanning Electron Microscope (SEM) and Energy Dispersive Spectrometry (EDS) analyses revealed that buildup of a porous layer of nanoparticles on the heater surface occurred during nucleate boiling. This layer significantly improves the surface wettability, as shown by measured changes in the static contact angle on the nanofluid-boiled surfaces compared with the pure-water-boiled surfaces. It is hypothesized that surface wettability improvement may be responsible for the CHF enhancement.<br>by Sung Joong Kim.<br>S.M.
APA, Harvard, Vancouver, ISO, and other styles
7

Athavale, Advait D. "EXPERIMENTAL STUDY OF SATURATED NUCLEATE POOL BOILING IN AQUEOUS POLYMERIC SOLUTIONS." University of Cincinnati / OhioLINK, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1314758640.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zeng, Yi. "Effect of peripheral wall conduction in pool boiling." Thesis, University of Ottawa (Canada), 1985. http://hdl.handle.net/10393/22397.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Lüttich, Torsten. "Modeling and identification of pool boiling heat transfer /." Düsseldorf : VDI-Verl, 2005. http://bvbr.bib-bvb.de:8991/F?func=service&doc_library=BVB01&doc_number=014597255&line_number=0001&func_code=DB_RECORDS&service_type=MEDIA.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Glavin, Nicholas R. "Photonically Enhanced and Controlled Pool Boiling Heat Transfer." University of Dayton / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=dayton1343401685.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Pool boiling"

1

Bertsch, George M. Nucleate pool boiling characteristics of R-124. Naval Postgraduate School, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Engineering, Foundation Conference on Pool and External Flow Boiling (1992 Santa Barbara Calif ). Pool and external flow boiling: Proceedings of the Engineering Foundation Conference on Pool and External Flow Boiling, Santa Barbara, California, March 22-27, 1992. Published on the behalf of the Engineering Foundation by The Society, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

United States. National Aeronautics and Space Administration., ed. Environmental qualification testing of the prototype pool boiling experiment. National Aeronautics and Space Administration, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

National Institute of Standards and Technology (U.S.), ed. Enhancement of R123 pool boiling by the addition of hydrocarbons. U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

National Institute of Standards and Technology (U.S.), ed. The effect of lubricant concentration, miscibility, and viscosity on R134a pool boiling. U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

United States. National Aeronautics and Space Administration., ed. Electrical design of Space Shuttle Payload G-534: The pool boiling experiment. National Aeronautics and Space Administration, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

National Institute of Standards and Technology (U.S.), ed. The effect of lubricant concentration, miscibility, and viscosity on R134a pool boiling. U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

National Institute of Standards and Technology (U.S.), ed. The effect of lubricant concentration, miscibility, and viscosity on R134a pool boiling. U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bode, Andreas. Heat transfer, vapour bubble dynamics and sound emission in subcooled nucleate pool boiling. Shaker Verlag, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

John, Benton, Kucner Robert, and NASA Glenn Research Center, eds. Subcooled pool boiling heat transfer mechanisms in microgravity: Terrier-improved orion sounding rocket experiment. National Aeronautics and Space Administration, Glenn Research Center, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Pool boiling"

1

Todreas, Neil E., and Mujid S. Kazimi. "Pool Boiling." In Nuclear Systems Volume I. CRC Press, 2021. http://dx.doi.org/10.1201/9781351030502-12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Dhir, Vijay K. "Nucleate Pool Boiling." In Handbook of Thermal Science and Engineering. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-26695-4_41.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Herwig, Heinz. "Behältersieden (pool boiling)." In Wärmeübertragung A-Z. Springer Berlin Heidelberg, 2000. http://dx.doi.org/10.1007/978-3-642-56940-1_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Zudin, Yuri B. "Nucleate Pool Boiling." In Non-equilibrium Evaporation and Condensation Processes. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-13815-8_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Gorenflo, Dieter, and David Kenning. "H2 Pool Boiling." In VDI Heat Atlas. Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-540-77877-6_45.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Zudin, Yuri B. "Nucleate Pool Boiling." In Non-equilibrium Evaporation and Condensation Processes. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-67553-0_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Dhir, Vijay K. "Nucleate Pool Boiling." In Handbook of Thermal Science and Engineering. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-32003-8_41-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Saha, Sujoy Kumar, Hrishiraj Ranjan, Madhu Sruthi Emani, and Anand Kumar Bharti. "Pool Boiling Enhancement Techniques." In Two-Phase Heat Transfer Enhancement. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-20755-7_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Das, Sarit Kumar, and Dhiman Chatterjee. "Types of Boiling—The Pool Boiling Curve." In Vapor Liquid Two Phase Flow and Phase Change. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-20924-6_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Das, Sarit Kumar, and Dhiman Chatterjee. "Pool Boiling Crisis, Critical Heat Flux and Film Boiling." In Vapor Liquid Two Phase Flow and Phase Change. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-20924-6_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Pool boiling"

1

Shi, Shangyang, Jianyu Du, Ran Hu, et al. "Pool Boiling Enhancement via Surface Engineering for Thermal Management." In 2024 25th International Conference on Electronic Packaging Technology (ICEPT). IEEE, 2024. http://dx.doi.org/10.1109/icept63120.2024.10668608.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Straub, Johannes. "POOL BOILING IN MICROGRAVITY." In Microgravity Fluid Physics & Heat Transfer. Begellhouse, 2023. http://dx.doi.org/10.1615/mfpht-1999.140.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Lee, Ho Sung, and Herman Merte, Jr. "POOL BOILING MECHANISMS IN MICROGRAVITY." In Microgravity Fluid Physics & Heat Transfer. Begellhouse, 2023. http://dx.doi.org/10.1615/mfpht-1999.150.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bergles, Arthur E. "Bora Mikic and Pool Boiling." In ASME 2005 Summer Heat Transfer Conference collocated with the ASME 2005 Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems. ASMEDC, 2005. http://dx.doi.org/10.1115/ht2005-72787.

Full text
Abstract:
Even though Bora Mikic did his doctoral thesis on contact conductance, it was natural that he became involved immediately thereafter with the boiling group in the MIT Heat Transfer Laboratory. After all, contact conductance depends on randomly spaced points of contact between two surfaces, while nucleate pool boiling depends on randomly spaced cavities on a surface covered by liquid. Bora worked actively in boiling in the 1960s and 1970s. Collaborating with Warren Rohsenow, he developed what still is one of the most fundamental models for saturated pool boiling.
APA, Harvard, Vancouver, ISO, and other styles
5

Villa, Fabio, Anastasios Georgoulas, Marco Marengo, Paolo Di Marco, and Joël De Coninck. "Pool Boiling Versus Surface Wettability Characteristics." In The World Congress on Momentum, Heat and Mass Transfer. Avestia Publishing, 2016. http://dx.doi.org/10.11159/icmfht16.110.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Tanger, G. E., R. I. Vachon, and R. B. Pollard. "POOL BOILING RESPONSE TO PRESSURE DECAY." In International Heat Transfer Conference 3. Begellhouse, 2019. http://dx.doi.org/10.1615/ihtc3.1140.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hu, Robert Y. Z., and James P. Hartnett. "NUCLEATE POOL BOILING TO VISCOELASTIC FLUIDS." In International Heat Transfer Conference 9. Begellhouse, 1990. http://dx.doi.org/10.1615/ihtc9.80.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zhao, Yaohua, Takaharu Tsuruta, and Chaoyue Ji. "Bubble Behaviors in Subcooled Pool Boiling." In International Heat Transfer Conference 12. Begellhouse, 2002. http://dx.doi.org/10.1615/ihtc12.2320.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Brumfield, Lance Austin, Jeong Tae Ok, and Sunggook Park. "Pool Boiling Enhancement via Micro Ratchets." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-63736.

Full text
Abstract:
Preliminary experiments on nucleate pool boiling using asymmetric micro ratchets with de-ionized (DI) water as the working fluid were investigated. Two brass surfaces were tested for comparison; one surface was manually polished while the second was composed of asymmetric ratchets with 30μm height and 150 μm period. Small test aquariums (114.8 mm × 54 mm × 152.4 mm) were fabricated and tested on a hot plate. Results show that the ratchet surface made significant heat transfer improvements over the polished surface.
APA, Harvard, Vancouver, ISO, and other styles
10

Ose, Yasuo, and Tomoaki Kunugi. "Numerical Study on Subcooled Pool Boiling." In ASME/JSME 2011 8th Thermal Engineering Joint Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/ajtec2011-44401.

Full text
Abstract:
This study focuses on the clarification of the heat transfer characteristics of the subcooled pool boiling, the discussion on its mechanism, and finally the establishment of a boiling and condensation model for numerical simulation on the subcooled pool boiling phenomena. In this paper, the boiling and condensation model is improved by introducing the following models based on the quasi-thermal equilibrium hypothesis; (1) a modified phase-change model which consisted of the enthalpy method for the water-vapor system, (2) a relaxation time derived by considering unsteady heat conduction. Resulting from the numerical simulations on the subcooled pool boiling based on the MARS (Multi-interface Advection and Reconstruction Solver) with improved boiling and condensation model, the numerical results regarding the bubble growth process of the subcooled pool boiling show in good agreement with the experimental observation results and the existing analytical equations.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Pool boiling"

1

Kedzierski, Mark A. Enhancement of R123 pool boiling by addition of hydrocarbons. National Institute of Standards and Technology, 1998. http://dx.doi.org/10.6028/nist.ir.6244.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kedzierski, Mark A. Enhancement of R123 pool boiling by addition of N-Hexane. National Institute of Standards and Technology, 1996. http://dx.doi.org/10.6028/nist.ir.5780.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Jung, C., and A. Bergles. Evaluation of commercial enhanced tubes in pool boiling: Topical report. Office of Scientific and Technical Information (OSTI), 1989. http://dx.doi.org/10.2172/5885134.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kedzierski, Mark A. Calorimetric and visual measured of R123 pool boiling on four enhanced surfaces. National Institute of Standards and Technology, 1995. http://dx.doi.org/10.6028/nist.ir.5732.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kedzierski, Mark A. The effect of lubricant concentration, miscibility, and viscosity on R134a pool boiling. National Institute of Standards and Technology, 2000. http://dx.doi.org/10.6028/nist.ir.6450.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kedzierski, Mark A. Use of fluorescence to measure the lubricant excess surface density during pool boiling. National Institute of Standards and Technology, 2001. http://dx.doi.org/10.6028/nist.ir.6727.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Moreno, J. B., G. C. Stoker, and K. R. Thompson. X-ray observations of boiling sodium in a reflux-pool-boiler solar receiver. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/5784067.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kedzierski, M. A. Effect of bulk lubricant concentration of the excess surface density during R123 pool boiling. National Institute of Standards and Technology, 2001. http://dx.doi.org/10.6028/nist.ir.6754.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kedzierski, Mark A. Effect of CuO nanoparticle concentration on R134alubricant pool boiling heat transfer with extensive analysis. National Institute of Standards and Technology, 2007. http://dx.doi.org/10.6028/nist.ir.7450.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kedzierski, Mark A., and Lingnan Lin. Pool boiling of HFO-1336mzz(Z) on a reentrant cavity surface; extensive measurement and analysis. National Institute of Standards and Technology, 2018. http://dx.doi.org/10.6028/nist.tn.2022.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Pool boiling' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography