Academic literature on the topic 'Portevin-Le Châtelier effect'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Portevin-Le Châtelier effect.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Portevin-Le Châtelier effect"

1

Noronha, S. J., G. Ananthakrishna, L. Quaouire, C. Fressengeas, and L. P. Kubin. "Chaos in the Portevin–Le Châtelier Effect." International Journal of Bifurcation and Chaos 07, no. 11 (November 1997): 2577–86. http://dx.doi.org/10.1142/s0218127497001734.

Full text
Abstract:
We report the verification of the prediction of chaos in the Portevin–Le Châtelier effect or the jerky flow by analyzing the stress signals obtained from samples of polycrystalline Al–Mg alloys subjected to a constant strain rate test. Particular care is taken to obtain reasonably long and accurate stress signals. The analysis of these signals is carried out by using several complementary methods such as calculation of correlation dimension, singular value decomposition and the spectrum of Lyapunov exponents. The analysis shows the existence of a finite correlation dimension and a positive Lyapunov exponent. Using the existence of a positive Lyapunov exponent and finite correlation dimension as a discriminator, we also carry out a surrogate analysis of the time series to ascertain that the signals are not from a power law stochastic process. The analysis provides an unambiguous support for the existence of chaos in Portevin–Le Châtelier effect thus verifying the prediction of the model. Further, from the analysis we find that the minimum number of variables required for a dynamical description of the jerky flow appears to be four or five consistent with the model.
APA, Harvard, Vancouver, ISO, and other styles
2

Quaouire, L., and C. Fressengeas. "Dynamical Analysis of the Portevin - Le Châtelier Effect." Solid State Phenomena 42-43 (April 1995): 293–302. http://dx.doi.org/10.4028/www.scientific.net/ssp.42-43.293.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Brechet, Y., and Y. Estrin. "Pseudo-portevin-le châtelier effect in ordered alloys." Scripta Materialia 35, no. 2 (July 1996): 217–23. http://dx.doi.org/10.1016/1359-6462(96)00126-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Mansouri, L. Z., J. Coër, S. Thuillier, H. Laurent, and P. Y. Manach. "Investigation of Portevin-Le Châtelier effect during Erichsen test." International Journal of Material Forming 13, no. 5 (September 12, 2019): 687–97. http://dx.doi.org/10.1007/s12289-019-01511-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Hähner, P. "On the critical conditions of the Portevin-Le Châtelier effect." Acta Materialia 45, no. 9 (September 1997): 3695–707. http://dx.doi.org/10.1016/s1359-6454(97)00066-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Hähner, Peter. "Modelling the spatiotemporal aspects of the Portevin-Le Châtelier effect." Materials Science and Engineering: A 164, no. 1-2 (May 1993): 23–34. http://dx.doi.org/10.1016/0921-5093(93)90640-z.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

D'Anna, Gianfranco, and Franco Nori. "Critical Dynamics of Burst Instabilities in the Portevin-Le Châtelier Effect." Physical Review Letters 85, no. 19 (November 6, 2000): 4096–99. http://dx.doi.org/10.1103/physrevlett.85.4096.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zhang, Rui, Chenggang Tian, Chuanyong Cui, Yizhou Zhou, and Xiaofeng Sun. "Portevin-Le Châtelier effect in a wrought Ni–Co based superalloy." Journal of Alloys and Compounds 818 (March 2020): 152863. http://dx.doi.org/10.1016/j.jallcom.2019.152863.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Müller, Alexandra, Christian Segel, Mikhail Linderov, Alexei Vinogradov, Anja Weidner, and Horst Biermann. "The Portevin–Le Châtelier Effect in a Metastable Austenitic Stainless Steel." Metallurgical and Materials Transactions A 47, no. 1 (May 28, 2015): 59–74. http://dx.doi.org/10.1007/s11661-015-2953-x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Li, Chao, Jianwei Teng, Biaobiao Yang, Xianjue Ye, Lan Huang, Yong Liu, and Yunping Li. "Portevin-Le Châtelier Effect in a Powder Metallurgy Co-Ni-Based Superalloy." Materials 15, no. 8 (April 11, 2022): 2796. http://dx.doi.org/10.3390/ma15082796.

Full text
Abstract:
The Portevin-Le Châtelier (PLC) effect in a powder metallurgy (PM) Co-Ni-based superalloy was systematically investigated via the tensile tests at temperatures ranging from 200 to 600 °C and strain rates at 1.0 × 10−4 to 1.0 × 10−2. Both normal and inverse PLC effects were observed in the PLC regime, and the former appeared in the A and B types at a low temperature, whilst the latter appeared in the C type at an elevated temperature. Both positive and negative strain rate sensitivities (SRS) were shown in PLC regime, and SRS should be derived from same types of serrations. Based on the calculated activation energy, the substitutional atom Mo is considered to take primary responsibility for the PLC effect in present alloy.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Portevin-Le Châtelier effect"

1

Nogueira, de Codes Rodrigo. "Vieillissements statique et dynamique et instabilités associées : expérimentation, modélisation et simulations numériques." Phd thesis, École normale supérieure de Cachan - ENS Cachan, 2011. http://tel.archives-ouvertes.fr/tel-00846955.

Full text
Abstract:
L'objectif de cette thèse est d'étudier expérimentalement les phénomènes de vieillissement dus à la diffusion des atomes en solution dans les alliages d'aluminium et les instabilités qui leur sont associées comme le phénomène Portevin-Le Châtelier ou les bandes de Lüders et de proposer une modélisation de ces phénomènes dans le cadre de la thermodynamique des processus irréversibles. Une étude expérimentale détaillée est alors entreprise sur les alliages d'aluminium AA5083-H116 et AA5182-O. Le comportement du premier présente l'effet PLC de façon prononcée et les deux types d'instabilités sont observées simultanément pour le second. La corrélation d'images numériques et la thermographie infrarouge sont essentiellement employées pour détecter et caractériser les aspects spatiotemporels des instabilités observées. La déformation non homogène due à l'apparition et la propagation de bandes de localisation est mise en évidence. Ces bandes de déformation sont visualisées, permettant à leurs diverses caractéristiques (vitesse, orientation, largeur, vitesse de déformation à l'intérieur des bandes, augmentation de la température à l'intérieur des bandes) d'être mesurées sur des éprouvettes lisses (plates, cylindriques ou prismatiques). Dans le cas des éprouvettes plates, l'effet des épaisseurs de l'éprouvette a aussi été examiné. Les caractéristiques des bandes sont aussi analysées sur d'autres géométries d'éprouvette (entaillées avec divers types d'entailles) à des vitesses de déformation différentes pour exhiber leur morphologie en présence de chargements multiaxiaux. Des simulations non linéaires et tridimensionnelles ont été effectuées en utilisant le modèle de McCormick pour montrer comment la prise en compte des phénomènes de vieillissement, même partielle, permet de décrire les hétérogénéités et le mouvement des bandes de déformation ainsi que de prévoir leurs différentes caractéristiques. Enfin, en se basant sur les mécanismes physiques à la base des phénomènes de vieillissement et en soulignant les limites du modèle de McCormick, un modèle élasto-viscoplastique prenant en considération les phénomènes de vieillissement est proposé dans le cadre de la thermodynamique des processus irréversibles.
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Portevin-Le Châtelier effect"

1

Jarfors, Anders E. W., Nils-Erik Andersson, Toni Bogdanoff, Mostafa Payandeh, Salem Seifeddine, Alexander Leickt, and Aron Tapper. "The Portevin-Le Châtelier Effect in a Rheocast Al-Si-Cu Alloy." In Light Metals 2015, 321–25. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-48248-4_54.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Søreng, A., and H. J. Roven. "In situ Investigation of the Portevin-Le Châtelier Effect in AlZnMg Alloys." In Advanced Light Alloys and Composites, 369–74. Dordrecht: Springer Netherlands, 1998. http://dx.doi.org/10.1007/978-94-015-9068-6_47.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hähner, Peter. "Modelling the spatiotemporal aspects of the Portevin-Le Châtelier effect." In Fundamental Aspects of Dislocation Interactions, 23–34. Elsevier, 1993. http://dx.doi.org/10.1016/b978-1-4832-2815-0.50007-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Chmelik, F., Z. Trojanová, Z. Převorovský, and P. Lukáč. "The Portevin–Le Châtelier effect in Al–2.92%Mg–0.38%Mn alloy and linear location of acoustic emission." In Fundamental Aspects of Dislocation Interactions, 260–65. Elsevier, 1993. http://dx.doi.org/10.1016/b978-1-4832-2815-0.50041-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography