Relevant bibliographies by topics / Positioning tools / Journal articles
To see the other types of publications on this topic, follow the link: Positioning tools.

Journal articles on the topic 'Positioning tools'

Author: Grafiati
Published: 4 June 2021
Last updated: 18 June 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Positioning tools.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Bauer, Joerg, Dominik Kern, Serdal Ayhan, et al. "Planar positioning stage for micro machining." Production Engineering 7 (July 3, 2013): 511–16. https://doi.org/10.1007/s11740-013-0474-2.

Full text
Abstract:
The following article presents an approach for a novel positioning stage as basic component of a small machine tool. It is a parallelkinematic machine (BiGlide mechanism), which converts the linear motion of two linear axes into a planar motion. The novel features, which were identified to be crucial for the transition from conventional machine tools to small ones, are: compact and precise feed axes, backlash free motion transmission, and direct measurement of the tool-center-point position and the ability of additional fine positioning. The proposed implementations are: hydraulic feed units, dry slide bearings as rotational joints, highly precise radar sensors and active variable-length struts of the parallelkinematic machine. Some of the simulation results are presented along with measurements of a currently designed prototype.
APA, Harvard, Vancouver, ISO, and other styles
2

Попова, Н. Е., Д. И. Слугин, and Е. С. Панина. "Marketing tools for university positioning." Bulletin of Pedagogical Sciences, no. 4 (May 13, 2024): 16–25. http://dx.doi.org/10.62257/2687-1661-2024-4-16-25.

Full text
Abstract:
в статье анализируются статистические данные, полученные на основе анкетирования абитуриентов, приходящих в вузы на дни открытых дверей. При анализе сделан акцент на художественные выставки, которые смогут показать не только направления и стили живописи, но и сориентировать абитуриента в том, какие компетенции формируют в процессе обучения в вузе, и в том, готов ли он обучаться в данном вузе. Для привлечения абитуриентов в вузы художественно-эстетической направленности раскрыты инструменты маркетинга и обращено особое внимание на таргетированность, индивидуализацию и персонификацию коммуникаций. Для позиционирования вуза использованы средства PR: издание методической и научной литературы, участие в мастер-классах, конференциях и творческой деятельности. Особое внимание обращено на такие инструменты маркетинга, которые способствуют продвижению выставочной деятельности в вузе и привлечению экспонентов и абитуриентов к сотрудничеству с вузом. Высказан ряд предложений по позиционированию вуза на основе внедрения выставочной деятельности. В частности: определен интерес абитуриентов к тематике выставок, поэтому перед организацией выставки нужно готовить экспонента к правильному оформлению выставки; по окончании выставки проводить конференции с абитуриентами по обмену мнениями и мастер-классы под руководством экспонента; изготавливать бейдж с логотипом вуза для экспонента и абитуриента-посетителя выставки; материализовать выставку в виде буклета; вручать диплом экспонентам и сертификат посетителям выставки; издавать журнал с репродукциями картин художника и его биографией; пользоваться услугами байера. the article analyzes statistical data obtained from a survey of applicants coming to universities for open days. The analysis focuses on art exhibitions that can show not only the directions and styles of painting, but also orient the applicant in what competencies are formed during the process of studying at a university, and whether he is ready to study at this university. To attract applicants to universities of artistic and aesthetic orientation, marketing tools are revealed and special attention is paid to targeting, individualization and personification of communications. PR means were used to position the university: publication of methodological and scientific literature, participation in master classes, conferences and creative activities. Particular attention is paid to marketing tools that help promote exhibition activities at the university and attract exhibitors and applicants to cooperate with the university. A number of proposals were made for positioning the university based on the introduction of exhibition activities. In particular: the interest of applicants in the topics of exhibitions has been determined, therefore, before organizing the exhibition, it is necessary to prepare the exhibitor for the correct design of the exhibition; at the end of the exhibition, hold conferences with applicants to exchange opinions and master classes under the guidance of the exhibitor; produce a badge with the university logo for the exhibitor and applicant-visitor of the exhibition; materialize the exhibition in the form of a booklet; present diplomas to exhibitors and certificates to exhibition visitors; publish a magazine with reproductions of the artist’s paintings and his biography; use the services of a buyer.
APA, Harvard, Vancouver, ISO, and other styles
3

Ruiz, Antonio Ramon, Jorge Rosas, Fernando Granja, et al. "A Real-Time Tool Positioning Sensor for Machine-Tools." Sensors 9, no. 10 (2009): 7622–47. http://dx.doi.org/10.3390/s91007622.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Teif, Vladimir B. "Nucleosome positioning: resources and tools online." Briefings in Bioinformatics 17, no. 5 (2015): 745–57. http://dx.doi.org/10.1093/bib/bbv086.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Adeyeye Oshin, Michael, and Nobaene Sehloho. "An Indoor Positioning System Using Multiple Methods and Tools." International Journal of Information, Communication Technology and Applications 4, no. 1 (2018): 11–22. http://dx.doi.org/10.17972/ijicta20184134.

Full text
Abstract:
With many different studies showing a growing demand for the development of indoor positioning systems, numerous positioning and tracking methods and tools are available for which can be used for mobile devices. Therefore, an interest is more on development of indoor positioning and tracking systems that are accurate and effective. Presented and proposed in this work, is an indoor positioning system. As opposed to an Ad-hoc Positioning System (APS), it uses a Wireless Mesh Network (WMN). The system makes use of an already existing Wi-Fi infrastructure technology. Moreover, the approach tests the positioning of a node with its neighbours in a mesh network using multi-hopping functionality. The positioning measurements used were the ICMP echos, RSSI and RTS/CTS requests and responses. The positioning method used was the trilateral technique, in combination with the idea of the fingerprinting method. Through research and experimentation, this study developed a system which shows potential as a positioning system with an error of about 2 m to 3 m. The hybridisation of the method proves an enhancement in the system though improvements are still required.
APA, Harvard, Vancouver, ISO, and other styles
6

Vught, Frans van, and Jeroen Huisman. "Institutional Profiles: Some Strategic Tools." Tuning Journal for Higher Education 1, no. 1 (2014): 21. http://dx.doi.org/10.18543/tjhe-1(1)-2013pp21-36.

Full text
Abstract:
In this paper we argue that both internal and external pressures and conditions urge contemporary higher education institutions to carefully think through their institutional profiles positions in domestic and global higher education contexts. We subsequently analyse strategic positioning from the strategic management literature and offer four tools — mapping, multi-dimensional ranking, benchmarking and degree profiling — to assist higher education institutions in their profiling and positioning strategies.
APA, Harvard, Vancouver, ISO, and other styles
7

Li, Senyuan, and Mingju Chen. "An Electric Power Tools Localization Algorithm Based on Active RFID." Journal of Engineering System 2, no. 1 (2024): 17–23. http://dx.doi.org/10.62517/jes.202402104.

Full text
Abstract:
In order to solve the problems of low positioning accuracy and poor stability of indoor electric power tools positioning technology in practical applications, this paper proposes a spatial positioning algorithm based on active Radio Frequency Identification (RFID). The algorithm first uses the Received Signal Strength Indicator (RSSI) ranging model to convert the signal strength of the target position to the distance from the target position to the locator, then obtains more accurate position information through the multilateral positioning model, and finally reduces the positioning error through the least squares estimation algorithm. In addition, a localization software system is designed for the algorithm, which displays the target's position and detailed coordinate information on top of the system interface, providing an intuitive display for indoor localization. The experimental results show that the algorithm can meet the basic needs of indoor positioning of electric apparatus, and the designed positioning software system can accurately display the position coordinates of electric apparatus.
APA, Harvard, Vancouver, ISO, and other styles
8

Zou, Hua Bing, Xin Du Chen, and Hong Jian Xia. "Modeling of the Positioning Error in Ultra-Precision Machine Tools." Key Engineering Materials 679 (February 2016): 33–36. http://dx.doi.org/10.4028/www.scientific.net/kem.679.33.

Full text
Abstract:
The positioning error of ultra-precision machine tools is the primary factor directly affecting the machining accuracy. It mainly depends on the machine tools guide. And its variation trend contains the same inertia as that of the machine tools movement. The variation trend of the positioning error is the derivative of a function fitted with the positioning errors of three adjacent testing points. The variation trends function is fitted with the variation trend of many points. The model of positioning error is the integral of the variation trends function. Because the variation trend of positioning error has certain inertia, the model of positioning error which is obtained in this way is more precise and more reliable than error function model which is directly fitted with limited discrete data.
APA, Harvard, Vancouver, ISO, and other styles
9

MIZUMOTO, Hiroshi. "Positioning Technology for Ultra-precision Machine Tools." Transactions of the Japan Society of Mechanical Engineers Series C 76, no. 769 (2010): 2167–75. http://dx.doi.org/10.1299/kikaic.76.2167.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Savolainen, T., D. Beeckmann, P. Groumpos, and H. Jagdev. "Positioning of modelling approaches, methods and tools." Computers in Industry 25, no. 3 (1995): 255–62. http://dx.doi.org/10.1016/0166-3615(94)00043-p.

Full text
APA, Harvard, Vancouver, ISO, and other styles
11

Sriyono, Sriyono, Hakim Zulkarnain, Erna Dwi Wahyuni, Wikan Purwihantoro Sudarmaji, Jujuk Proboningsih, and María Pilar Mosteiro-Diaz. "Nurses Experience of Prone Position in The Absence of Positioning Tool, and Suggestion of Prone Position Tool: A Phenomenology Study." JURNAL INFO KESEHATAN 22, no. 2 (2024): 289–99. http://dx.doi.org/10.31965/infokes.vol22.iss2.1542.

Full text
Abstract:
During the COVID-19 pandemic which is a non-natural disaster, the ARDS cases (Acute Respiratory Disease Syndrome) rocketed. Despite the advantages of prone positioning for ARDS care, ICU staff seldom use it due to the unavailability of positioning tools, making it a challenging task for nurses. This study aims to investigate nurses' experiences with manual prone positioning and propose ICU-friendly prone position tools. This research method used a qualitative phenomenology theory study to 15 ICU nurses who were experienced in prone positioning at least 10 times to intubated patients and had complaints about the intervention. The experience was gathered using structured questions and recorded. The data was analyzed following Colaizzi’s thematic method, and all the emerged themes were collected and reported. The research results show that fifteen interviewed nurses noted that prone positioning is physically demanding and requires a coordinated team with a minimum of three staffs, 2 handles patient positioning, 1 leader securing the intubation tube. Before starting, the team assesses the difficulty level. Recommended tools include a slide sheet with handles, a modified Vollman prone positioner, and a crane-like prone harness. The conclusion is nurses find tools highly beneficial for prone positioning but will improvise with available resources like underpads as a ring-shaped pillow if tools are unavailable.
APA, Harvard, Vancouver, ISO, and other styles
12

Sweeney, John. "Climate change: Positioning Ireland, positioning geography." Irish Geography 44, no. 1 (2014): 1–5. http://dx.doi.org/10.55650/igj.2011.32.

Full text
Abstract:
The exposed location of Ireland has always rendered it vulnerable to weather and climate extremes. Awareness that future climate change will pose a complex mix of impacts necessitates strategic thinking on how best adaptation to future conditions can be achieved for Ireland. This extended introduction to seven papers examines how different perspectives and tools can be brought to bear on the problem. First, a historical context is needed to learn from past mistakes and inform future strategy. Current uncertainties are then addressed with reference to hydrological modelling where the need to act in advance of scientific certainty is emphasised. Analytical techniques involving satellite remote sensing and climate envelope modelling are then shown to have considerable utility for managing valuable habitats and biodiversity change. Weaknesses in governance systems are highlighted with reference to the Cork floods of November 2009, and at a local government level, where an urgent need for leadership at a central government level to drive the climate change agenda is identified. The interdisciplinary position of geography is seen to offer many advantages to contribute to progress in the climate change arena.
APA, Harvard, Vancouver, ISO, and other styles
13

Sun, Guangming, Gaiyun He, Dawei Zhang, and Bohui Ding. "Experimental study on the repeatability of positioning of linear axes of machine tools." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 234, no. 4 (2019): 739–51. http://dx.doi.org/10.1177/0954405419887258.

Full text
Abstract:
This study presents experimental investigations on the mechanisms of the repeatability of positioning of linear axes of computer numerical control machine tools. First, the factors affecting the repeatability of positioning of linear axes are obtained based on orthogonal experiments. Second, the mechanism of each factor affecting the repeatability of positioning is studied based on single-factor experiments. Finally, an assembly method to improve the repeatability of positioning of linear axes is proposed. The method can provide designers and workers with informative guidelines for improving the repeatability of positioning in design and assembly processes.
APA, Harvard, Vancouver, ISO, and other styles
14

Modi, Sandeep. "Positioning ADMET in silico tools in drug discovery." Drug Discovery Today 9, no. 1 (2004): 14–15. http://dx.doi.org/10.1016/s1359-6446(04)02956-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
15

Ji, Zhao Ping. "Research on Measurement and Compensation of Backlash in CNC Machine." Solid State Phenomena 279 (August 2018): 72–76. http://dx.doi.org/10.4028/www.scientific.net/ssp.279.72.

Full text
Abstract:
The machining accuracy of parts depends greatly on the positioning accuracy and repeated positioning accuracy of the machine tools, which can be affected by the transmission backlash. Therefore, it is of great importance to measure and compensate the transmission reverse clearance of NC machine tools at regular intervals. This paper mainly studies how to eliminate the reverse clearance of NC machine tools.
APA, Harvard, Vancouver, ISO, and other styles
16

Ishchenko, Ihor, and Olena Bashkeieva. "Positioning and Rebranding as a State Security Tools in Global Space." Środkowoeuropejskie Studia Polityczne, no. 2 (June 15, 2021): 99–117. http://dx.doi.org/10.14746/ssp.2021.2.6.

Full text
Abstract:
The purpose of this article is to explore positioning and rebranding as tools for state security in global space, using the methodology of constructivism in international relations. The author hypothesizes that positioning the country as safe will be attractive only if there is a unifying factor based on the principles of consocial democracy. To achieve this purpose, the authors used several scientific approaches and methods: constructivism as a scientific paradigm; dialectical method; content analysis, and comparison. The article covers the following issues: Positioning and rebranding in modern conditions; Level of branding effectiveness in Ukraine; National identity as the basis for rebranding and state security; Rebranding states in the face of new challenges and threats. The essence of the conclusions is as follows: States will choose a partner for economic cooperation under difficult conditions in terms of political risks, benefits, and costs. This trend is about renewed positioning and rebranding to facilitate decisions on cooperation. The effectiveness of the existing state brand depends not only on creating an attractive external picture of the country’s positioning. Without a genuine alignment of the declared brand with the internal situation of the state, the political system as a whole, the congruent of the mental construct of the main political structures and the social environment, the brand will not be attractive to investors and the country will remain in an unstable environment.
APA, Harvard, Vancouver, ISO, and other styles
17

SHIBUKAWA, Tetsuro, and Kazuhiko SUGITA. "Special Issue on Ultra-precision Positioning Technologies. High-precision Positioning Technology on Recent Machine Tools." Journal of the Japan Society for Precision Engineering 57, no. 10 (1991): 1717–21. http://dx.doi.org/10.2493/jjspe.57.1717.

Full text
APA, Harvard, Vancouver, ISO, and other styles
18

Stan, G., and A. Stoica. "Influence of the positioning accuracy given by the positioning encoder of the CNC machine tools." IOP Conference Series: Materials Science and Engineering 1182, no. 1 (2021): 012072. http://dx.doi.org/10.1088/1757-899x/1182/1/012072.

Full text
Abstract:
Abstract The CNC machine tools are present at a large extent worldwide, for machining by cutting all kinds of work pieces. Their machining accuracy and quality are crucial to obtaining very accurate and intricate work pieces. The accuracy of a CNC machine tool is given by the quality of each and every kinematic linkage/coupling in its structure. This work aims at researching the influence of several constructive and functional factors on the positioning accuracy of a kinematic coupling in the structure of a CNC machine tool. The influence caused by noncompliance with the Abbé principle on the positioning accuracy of a feed kinematical linkage is analysed into detail, both at idle and load running. Out of this research useful conclusions are resulting for the CNC machine tool designers and builders, with respect to optimising several constructive factors, such as the location of the position encoder, location of the ball screw, stiffness of the directional guideways etc., in order to improve the accuracy of the CNC machine tool. The results of the theoretical research have been validated through experimental trials, confirming the impossibility of full compliance with the Abbé on the CNC machine tools.
APA, Harvard, Vancouver, ISO, and other styles
19

Stejskal, Tomáš, Miroslav Štofa, Jozef Svetlík, Martin Pituk, and Adam Žilinský. "Production Aspects Affecting the Final Precision Machining of Advanced Materials." Key Engineering Materials 756 (September 2017): 155–61. http://dx.doi.org/10.4028/www.scientific.net/kem.756.155.

Full text
Abstract:
When creating products of modern construction materials has a great influence on their endpoints right way and the quality of working on machine tools. The article deals with positioning accuracy of machine tools which is carried out in an unloaded condition, according to international standard ISO 230-2. Overall accuracy of working machining is determined mainly static rigidity, geometrical accuracy of mechanical components, positioning accuracy and dynamic stiffness. Static stiffness is defined in new machine tools in a limited workspace. Therefore, the article deals with the definition of static stiffness in the expanded work area and also defines its impact on the positioning accuracy at individual points in workspace of the machine tool.
APA, Harvard, Vancouver, ISO, and other styles
20

Hansen, H. "SP-0580: Patient education - tools to improve patient positioning." Radiotherapy and Oncology 123 (May 2017): S307. http://dx.doi.org/10.1016/s0167-8140(17)31020-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
21

Subotina, Julia, and Alexander Sergienko. "APPROACHES TO AGRICULTURAL ENTERPRISES POSITIONING." Three Seas Economic Journal 2, no. 1 (2021): 85–90. http://dx.doi.org/10.30525/2661-5150/2021-1-14.

Full text
Abstract:
With the development of market economic relations and the intensification of competition in Ukraine, the problem of adequate positioning of enterprises among competitors, as well as in the consumers` minds becomes relevant. The author summarizes scientific approaches of foreign and domestic scientists to the interpretation of the concept of "positioning", which are reflected in the following: F. Kotler (positioning as a way of identifying goods), J. Trout, E. Reiss (as a certain position of the enterprise among competing goods), Belyaeva N.S. (as an element of the enterprise strategic management system). Three basic components to understanding the essence of positioning are generalized and allocated: positioning as a concept that defines the ideological aspect in its definition (ideas and views), which are the basis of the enterprise product proposal; positioning as a strategy that involves the development of a competitive position of the enterprise product and the relevant marketing complex; positioning as a set of actions that characterizes a set of measures, specific ways to convey the position to the target segment in the implementation of marketing programs; so it is a set of tools to help forming a brand image that should strongly differ from competitors. Due to the fact that the agricultural component is important to the Ukrainian economy development, it is necessary to ensure the effective positioning of agricultural enterprises in foreign markets, which is the source of their sustainable competitive advantage. The opinions of Ukrainian scientists on the agricultural enterprises products positioning were summarized: Kozak L.V., who proposes strategies for the agricultural enterprises development; Kosharna P.S., who offers strategic tools for the agricultural enterprises; Artyukhova K.V. and Bondarenko V.V., who substantiate the necessary market position of agricultural enterprises. Approaches and factors for positioning of agricultural products that should be taken into account in the foreign economic activity of enterprises such as planning, staff, practice, partners that can strengthen opportunities, positioning, protection are analyzed. Peculiarities of agricultural enterprises products positioning were determined: production seasonality, high level of natural and climatic conditions dependence, role and value of products, variety of management organizational forms, time discrepancy in finished products growing and manufacturing, level of state participation in agro-industrial complex development. The author has formed a structural and logistical scheme of agricultural enterprises product positioning, which has the following main elements: purpose, means, conditions of activity, support (including the development of enterprise products positioning strategy) and marketing tools. The main marketing tools that must be used in positioning the products of agricultural enterprises include: the type of product, its quality, functional properties, type of packaging, guarantees; price formation conditions; logistics sales channels used in the delivery of products to the customer; products promotion; qualification of the personnel carrying out marketing support of agricultural enterprises production.
APA, Harvard, Vancouver, ISO, and other styles
22

Rooker, Tim, Graeme Potts, Keith Worden, Nikolaos Dervilis, and Jon Stammers. "Comparing approaches for multi-axis kinematic positioning in machine tools." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 235, no. 10 (2021): 1698–711. http://dx.doi.org/10.1177/09544054211019668.

Full text
Abstract:
Maintaining minimal levels of geometric error in the finished workpiece is of increasing importance in the modern production environment; there is considerable research on the identification, verification and calibration of machine tool kinematic error, and the development of Postprocessor implementations to generate NC-code optimised for machining accuracy. The choice of multi-axis positioning function at the controller, however, is an often-overlooked potential source of kinematic error which can be responsible for costly mistakes in the production environment. This paper presents an investigation into how mis-management of the positional error parameters that define the rotary-axes’ pivot point can lead to unintended variations in multi-axis positioning. Four approaches for kinematic positioning on a Fanuc-based controller are considered, which reference two separate parameter locations to define the pivot point – managing the kinematics within the Postprocessor itself, full five-axis positioning with a fixture offset, full five-axis with rotation tool centre point control and 3+2-axis with a tilted workplane. Error vectors across four sets of rotary-axis indexations are simulated based on the theoretical kinematic model, to highlight the expected differences in geometric error attributable to mismatched pivot point parameters. Finally, the simulation results are verified experimentally, demonstrating the importance of maintaining a consistent approach in both programming and operation environments.
APA, Harvard, Vancouver, ISO, and other styles
23

Yang, Yi, Tao Wang, Jun Ge, Zhengzhong Zeng, and Yuzhou Chang. "Evaluation and Expression of Measurement Uncertainty of Axis Positioning Accuracy of Machine Tools." Highlights in Science, Engineering and Technology 56 (July 14, 2023): 229–33. http://dx.doi.org/10.54097/hset.v56i.10201.

Full text
Abstract:
Measure the axis bidirectional positioning accuracy of machine tools with guide rails of 2m, 4m and 10m in length, establish an evaluation model of Measurement uncertainty, and analyze the sources of each uncertainty. Combined with the measurement example, the evaluation process of Measurement uncertainty of axis positioning accuracy of machine tools is expounded, and the linear expression formula of Measurement uncertainty is given.
APA, Harvard, Vancouver, ISO, and other styles
24

Sun, Tao, Wen Wang, Zhanfeng Chen, et al. "Positioning Errors Measurement of CNC Machine Tools Based on J-DBB Method." Applied Sciences 11, no. 24 (2021): 11770. http://dx.doi.org/10.3390/app112411770.

Full text
Abstract:
Due to the errors of the servo system and the errors of the ball screw drive system, the positioning errors inevitably occur in the process of CNC machine tools. The measurement of traditional equipment is limited by a fixed measurement radius and a single degree of freedom, which can only be measured within a fixed plane. In this paper, four different positioning errors of CNC machine tools are first measured at full scale by using J-DBB (a modified double ball bar with one spherical joint connecting two bars) method. The J-DBB device uses a three-degree-of-freedom spherical joint as a connecting part, which realizes that the measurement radius can be continuously changed, and the measurement space is a spatial sphere. First, the principle of the J-DBB method is briefly introduced. Next, four typical positioning errors of CNC machine tools are analyzed and examined, which contain the uniform contraction error of ball screw and linear grating, periodic error of the ball screw and linear grating, interference of measurement devices error, and opposite clearance error. In the end, the trajectories of the CNC machine tool spindle with a single positioning error are simulated by using the J-DBB method. The results reveal that this method can be used for the positioning error of machine tools, which helps to better understand the spatial distribution of CNC machine tool errors and provides guidance for the reasonable selection of working areas to improve the machining accuracy of parts.
APA, Harvard, Vancouver, ISO, and other styles
25

Chen, Liang, and Masaomi Tsutsumi. "Compensation for Positioning Error of CNC Machine Tools Using Neural Network. Compensation for Multivariant Positioning Error." Transactions of the Japan Society of Mechanical Engineers Series C 61, no. 583 (1995): 1224–29. http://dx.doi.org/10.1299/kikaic.61.1224.

Full text
APA, Harvard, Vancouver, ISO, and other styles
26

Zhuykov, D. A., A. A. Churakova, and O. M. Perminova. "STRATEGIC TOOLS DEVELOPMENT TO ENSURE PRODUCT COMPETITIVENESS IN THE GLOBALIZATION CONTEXT." Social’no-ekonomiceskoe upravlenie: teoria i praktika 19, no. 4 (2023): 6–13. http://dx.doi.org/10.22213/2618-9763-2023-4-6-13.

Full text
Abstract:
The article studies the development of new methodological support for marketing activities in the context of globalization for innovative enterprises with a wide range of products. Today, manufacturers are winning over consumers in conditions of high competition and decreasing response time to market needs. It is necessary to structure the needs of the target audience according to purchase decision-making patterns. Based on the analysis of approaches to ensuring competitiveness, it was revealed that it is necessary to study consumer behavior and motivation for purchasing goods. The theories of purchasing decisions and motivation for choosing a product are analyzed. It is noted that globalization has transformed the consumer environment and consumer behavior, and the motives for self-positioning in society and joining new social groups are highlighted. The article proposes a “needs - interests - values” systematization, which highlights the special properties of a product. The proposed systematization is included in the algorithm for choosing a positioning strategy based on a ranking pyramid, taking into account: price, quality, functionality, design, exclusivity, brand status and brand spirit, which allow influencing the choice of the target audience. The developed seven-level ranking pyramid is a tool for making decisions on choosing a product positioning strategy. The proposed methodological approach to positioning of goods will ensure the competitiveness of the organization.
APA, Harvard, Vancouver, ISO, and other styles
27

Rohozian, Yu S. "USE OF LUHANSK AND DONETSK REGIONS POSITIONING TOOLS THROUGH AMALGAMATED TERRITORIAL COMMUNITIES DEVELOPMENT PRISM." Visnyk of Donetsk National University of Economics and Trade named after Mykhailo Tugan-Baranovsky, no. 1 (72) 2020 (2020): 40–48. http://dx.doi.org/10.33274/2079-4819-2020-72-1-40-48.

Full text
Abstract:
Objective. The objective of the article is to research the current provisions of the development strategies of the amalgamated territorial communities in the context of using the positioning tools of Luhansk and Donetsk regions in order to form a positive image of the territories and increase their competitiveness. Methods. To achieve the objective an abstract logical method is used (when substantiating the use of a marketing approach for the development of local territories); the method of structural and logical analysis (when determining the prerequisites for positioning the communities of the Lu­hansk and Donetsk regions) and the method of logical generalization (when revealing the value of the positioning process for the amalgamated territorial communities of the Luhansk and Donetsk regions) are applied. Results. The use of a marketing approach to the development of local territories is justified, the use of a territorial-sectoral concept as a classic for positioning the administrative-territorial units of Ukraine is noted. The provisions of the development strategies of the amalgamated territo­rial communities of Ukraine in the context of using positioning tools are investigated, and regional results have been clustered. Using the mapping method, the presence of deep asymmetries in the process of positioning the amalgamated territorial communities of Ukraine is proved, and the presence of only two marketing tools in their strategic documents (SWOT-analysis and assessment of the competitiveness of the territory) is ascertained. The main prerequisites for positioning the amalgamated territorial communities of Luhansk and Donetsk regions, which have difficult condi­tions for the formation of a positive image of their territories in connection with the continuation of hostilities in the east of the country, are identified and analysed. It is argued that the issues of increasing the image of the communities of Luhansk and Donetsk regions require attention to the unique available characteristics of the area, which makes us think about the modern redistribution of resources in favour of high-tech industries, the development of small and medium-sized busi­nesses, and tourism.
APA, Harvard, Vancouver, ISO, and other styles
28

Rakic, Beba, and Mira Rakic. "The positioning of Serbia." Zbornik Matice srpske za drustvene nauke, no. 123 (2007): 123–54. http://dx.doi.org/10.2298/zmsdn0723123r.

Full text
Abstract:
The need to attract tourists, companies (foreign direct investment) and talented people and to find markets for their exports requires that countries adopt strategic marketing management tools and conscious positioning. Serbia?s successful economic development requires radical reforms on multiple fronts simultaneously. The whole basis of Serbia?s national competitiveness must be transformed. This requires changing organizations? marketing strategies as well as new requirements for the Serbia?s business environment. Improving marketing activities of our enterprises require: the demise of marketing intuition and the rise of marketing science, the rise of holistic marketing the rise of partner relationship marketing and customer relationship marketing, discovering new points of differentiation and positioning on the base of consumption chain analysis, customer-centered brand management creating and sustaining a market-driven organization through a successful change program.
APA, Harvard, Vancouver, ISO, and other styles
29

Korokoshko, Julia V. "Competitive positioning: analysis and generalization of the enterprise's experience." Theoretical and Practical Aspects of Management, no. 9 (August 24, 2020): 102–22. http://dx.doi.org/10.46486/0234-4505-2020-9-102-122.

Full text
Abstract:
At present time, product positioning, research and analysis of external and internal environment factors that influence the competitive positioning of an enterprise are a necessary attribute of marketing for a modern company. The relevance of the material considered in the article, devoted to competitive positioning of the enterprise, is determined by the fact that the publication presents the results of research on the competitive positioning of products of one of the leading enterprise of the alcohol industry in Russia based on the use of modern methods of marketing analysis. The designated features of the process competitive positioning. The use of analytical marketing tools allowed us to analyze and to complete of experience competitive positioning of certain segments alcoholic products of LVZ «Saransky». The purpose of the research is complete of successful experience competitive positioning of the enterprise based on the analysis its development for positioning and promotion of alcoholic products on the marcet. The tasks of this work involve the analysis of external and internal environment factors that affect the choice of competitive positioning strategies for alcoholic products of the enterprise; research of the processes of strategic competitive positioning of the main types of alcoholic products of LVZ «Saransky»; assessment of the effectiveness of competitive positioning of alcoholic products of the enterprise. The results of the research are that by analysis of competitive positioning, using various marketing tools (analysis of the macro and micro environment of the enterprise, building maps of the positioning of the main types of products enterprise and its competitors, conducting segmentation analysis on various parameters, etc.), is revealed the practice of successful experience of competitive positioning and promotion of alcoholic products of the enterprise on the market of the Republic of Mordovia.
APA, Harvard, Vancouver, ISO, and other styles
30

Funaru, Marian, and Gheorghe Stan. "Influence of Resistant Forces on the Positioning Precision of Kinematic Feed Chains Used on CNC Machine Tools." Applied Mechanics and Materials 657 (October 2014): 495–99. http://dx.doi.org/10.4028/www.scientific.net/amm.657.495.

Full text
Abstract:
Many researches from the international literature and also those of the specialised companies from the machine tools domain, have focused in the past years on increasing the positioning precision and implicitly, the manufacturing precision of the numerically controlled machine tools. The results of these efforts have led to the elimination or compensation of different factors which affect the positioning precision of the kinematic feed chains. Nevertheless, the effects of some factors still find themselves in the positioning error of the kinematic feed chains, an important component of this error being represented by the cutting and friction force induced error (resistant errors). This paper presents a new method of experimental analysis for establishing the influence of resistant forces on the positioning precision of the kinematic feed axis. Due to the fact that measuring the positioning precision during the cutting process is difficult to achieve, the experiments were carried out using a simulated force. In order to simulate an axial force, a hydraulic system was adopted, composed of a hydraulic cylinder, a distributor valve and a check valve.
APA, Harvard, Vancouver, ISO, and other styles
31

Stoica, A., and G. Stan. "Influence of the ball screw stiffness on the positioning accuracy of the CNC machine tools." IOP Conference Series: Materials Science and Engineering 1182, no. 1 (2021): 012076. http://dx.doi.org/10.1088/1757-899x/1182/1/012076.

Full text
Abstract:
Abstract This work is researching the ball screw stiffness influence on the positioning accuracy of the feed kinematic linkage of a CNC machine tool fitted with an indirect type measuring system for positioning the moving element. Because the machine tool is equipped with an indirect measuring system, backlashes and elastic deformations in the kinematic linkage cannot be offset by the position loop, consequently these are directly affecting the positioning accuracy. In this context, methods are used for diminishing their influence as well as compensation methods with a view to improve the positioning accuracy. Ways to preloading the ball screws and bearings of the ball screw are presented as well, by focussing on the optimisation, through calculations, of the preloading force value. An important component, analysed in this work, consists of the research of the ball screw–nut stiffness that depends on the strategy being used on the axial bearing of the two ends of the ball screw. The experimental tests have been performed at idle running on the CNC milling machine (CPFH 500), fitted with three controlled axes (X, Y and Z). Based on the experimental results, it may be noticed that, once increased the ball screw stiffness, within the limits stated by the ball screw supplier, the positioning accuracy will increase as well.
APA, Harvard, Vancouver, ISO, and other styles
32

Filippov, Rostislav, and Dmitriy Khort. "Multifunctional Robotic Device with Intelligent Positioning System." E3S Web of Conferences 493 (2024): 01003. http://dx.doi.org/10.1051/e3sconf/202449301003.

Full text
Abstract:
At the present stage of agricultural production development, Smart farming is widely used as a systematic transition from managing a separate technological operation to managing processes that ensure the achievement of the required level of overall profitability of production through the use of new decision-making tools and automated management technologies. This approach involves expanding the scope of machines, equipment and software, including the widespread use of robotic tools in horticultural production and processing technologies, in order to increase production efficiency, eliminate the “human factor” in the production of products, replace human participation in production processes with a large proportion of heavy manual labor and minimize harmful effects chemical protection products for humans and the environment. Another reason for the intensification of the development and implementation of robotic tools with intelligent control systems in agriculture is the shortage of technologists and engineers in farms, due to the unattractiveness of labor in the agro-industrial complex. The article discusses the issues of increasing the efficiency of industrial gardening, through the development and implementation of robotic systems and electric drive transformer modules in various technological processes. The features of the designs and practical application of robots with intelligent motion control systems on garden plantations are analyzed. The application of the block-modular principle of the layout of robotic machines is justified to increase the efficiency and productivity of their work in industrial gardening in various technological operations: plant care (spraying, milling of aisles) and harvesting.
APA, Harvard, Vancouver, ISO, and other styles
33

Chen, Da Ming, Kuo Liu, Xin Li, and Zhi Tan. "Test Research of Vertical Machine Center's Geometrical Accuracy Stabilization." Advanced Materials Research 852 (January 2014): 437–40. http://dx.doi.org/10.4028/www.scientific.net/amr.852.437.

Full text
Abstract:
Domestic CNC machine tool and NC machine tools abroad's main gap is accuracy stabilization rather than accuracy. Accuracy stabilization test is done on some three-axis vertical machining center aiming at the status. Laser interferometer is used to test X, Y, Z axis's positioning accuracy, repeat positioning accuracy and reverse gap. The test is done taking 80 days as the period. The accuracy test results is analyzed. From the positioning accuracy, repeat positioning accuracy and reverse gap curves we can see that, because of the factors of machine's use and temperature's change, X, Y, Z axis's positioning accuracy changes violently, repeat positioning accuracy and reverse gap change a little.
APA, Harvard, Vancouver, ISO, and other styles
34

Ustymenko, V. A., I. V. Zablodska, S. О. Burbelo, D. V. Zablodska, and P. O. Saenko. "IDENTIFICATION AND POSITIONING OF THE UNITED TERRITORIAL MUNICIPALITIES: METHODICAL TOOLS." Economics and Law, no. 1 (April 3, 2019): 44–50. http://dx.doi.org/10.15407/econlaw.2019.01.044.

Full text
APA, Harvard, Vancouver, ISO, and other styles
35

Jung, Suk-Hoon, Gunwoo Lee, and Dongsoo Han. "Methods and Tools to Construct a Global Indoor Positioning System." IEEE Transactions on Systems, Man, and Cybernetics: Systems 48, no. 6 (2018): 906–19. http://dx.doi.org/10.1109/tsmc.2016.2626797.

Full text
APA, Harvard, Vancouver, ISO, and other styles
36

Kanzaki, Kazuhiro, Masaomi Tsutsumi, and Liang Chen. "Evaluation Method of Accuracy of Positioning for CNC Machine Tools." Transactions of the Japan Society of Mechanical Engineers Series C 59, no. 560 (1993): 1286–91. http://dx.doi.org/10.1299/kikaic.59.1286.

Full text
APA, Harvard, Vancouver, ISO, and other styles
37

UHLMANN, Eckart, and Joerg ESSMANN. "D2 Compensation of Dynamic Dislocation for Micro Milling Machine Tools(Precision positioning and control technology)." Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2009.5 (2009): 167–72. http://dx.doi.org/10.1299/jsmelem.2009.5.167.

Full text
APA, Harvard, Vancouver, ISO, and other styles
38

Hlynskyy, Nazar, and Olha Hirna. "Positioning of low-urbanized territories based on self-identification: The case of Ukraine." Problems and Perspectives in Management 20, no. 1 (2022): 229–46. http://dx.doi.org/10.21511/ppm.20(1).2022.20.

Full text
Abstract:
In the context of competition for limited resources for the development of territorial communities in Ukraine, the use of marketing tools in managing local development is becoming increasingly important. One of these tools is positioning. In the case of territorial communities, it is a communicative expression of their identity. This study aims to determine the positioning characteristics of small territorial communities in Ukraine (low-urbanized territories – communities with a predominantly rural population) in formulating their positioning criteria. The subject of the analysis was the strategic visions formulated in the long-term planning documents of low-urbanized territories. Descriptive information was evaluated and grouped using expert methods. It was determined that low-urbanized territories in Ukraine use a multi-criteria approach in the positioning process: the number of applied criteria reached 26 (an average of 6 criteria). Each of them is focused on specific target audiences – residents, investors/local businesses, and tourists/visitors (48% for each of the target audiences). At the same time, less than half of the surveyed communities (44%) position themselves as “territories of developed agriculture”. Since little research has been done on the positioning of territorial communities in the Ukrainian context, this study has contributed new knowledge in this field.
APA, Harvard, Vancouver, ISO, and other styles
39

Liu, Xue Peng, and Dong Mei Zhao. "The Study on CNC Machine Tools Reform and Error Analysis." Applied Mechanics and Materials 299 (February 2013): 16–18. http://dx.doi.org/10.4028/www.scientific.net/amm.299.16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
40

Zanazanian, Paul. "History Teaching and Narrative Tools." Articles, no. 7 (May 19, 2016): 70–96. http://dx.doi.org/10.7202/1036417ar.

Full text
Abstract:
Based on an analysis of five English-speaking students’ written narratives on Quebec’s history, this article proposes a pedagogical tool for better integrating and vitalizing these students’ language community in Quebec. Despite tendencies of reliance and opposition emerging from their historical consciousness, these students do not employ clearly articulated and coherent English-speaking storylines for positioning themselves as a minority group. To this end, I suggest the creation of schematic narrative templates of English-speaking Quebec’s collective historical experiences for offering students workable springboards to develop personal narratives of belonging, while taking Francophone concerns of linguistic and cultural fragility into account.
APA, Harvard, Vancouver, ISO, and other styles
41

КИРИЛЛОВА, Л. К. "MARKETING TOOLS OF BRAND MANAGEMENT." Экономика и предпринимательство, no. 2(151) (May 31, 2023): 801–3. http://dx.doi.org/10.34925/eip.2023.151.2.155.

Full text
Abstract:
Рассматривается сущность бренд-менеджмента. Раскрывается роль позиционирования в создании устойчивых конкурентных преимуществ товара. Обоснована роль лояльности покупателей в повышении ценности бренда. Представлена типология покупателей по уровню лояльности к бренду и рекомендуемый набор действий. Обобщены методы оценки стоимости бренда. The essence of brand management is considered. The role of positioning in creating sustainable competitive advantages of the product is revealed. The role of customer loyalty in increasing brand value is substantiated. The typology of buyers by the level of loyalty to the brand and the recommended set of actions are presented. The methods of brand value estimation are generalized.
APA, Harvard, Vancouver, ISO, and other styles
42

Rónai, László, and József Lénárt. "Laser Interferometric Measurement of Machine Tools." Design of Machines and Structures 12, no. 2 (2022): 103–9. http://dx.doi.org/10.32972/dms.2022.019.

Full text
Abstract:
This paper deals with a positioning accuracy measurement on a machine tool to perform calibration. The principle of laser interferometric measurement is introduced, a Renishaw XL-80 laser interferometer is applied to perform measurements. The methodology of using the system is presented through a practical measurement. The deviations in certain positions are determined, thus the pitch error table of the machine tool can be refreshed. Thereafter a test running is performed in order to check the accuracy of the machining centre.
APA, Harvard, Vancouver, ISO, and other styles
43

S., Tabakovic, Budimir A., Zivanovic S., and Dimic Z. "Analysis of Positioning Accuracy of Prototype Machine Tools with Hybrid Kinematics." Journal of Mechatronics, Automation and Identification Technology 7, no. 1 (2022): 13–18. https://doi.org/10.5281/zenodo.8369682.

Full text
Abstract:
Machine tools with a hybrid kinematic structure represent an unconventional type of machine tools whose characteristics depend on the kinematic configuration. Therefore, it is necessary to perform a separate accuracy analysis for each machine configuration. The analysis of the characteristic values obtained by examining the accuracy of positioning is the starting point for further improvement and calibration of this type of machine. In the case of conventional machine tools with a serial kinematic structure, appropriate standards and recommendations are used to evaluate the state of the machine through testing the positioning accuracy. The paper describes the preliminary measurement of the condition of the machine tool with the hybrid kinematic structure "O-X glide" according to the ISO 230-2 standard, carried out in order to adjust the mechanical subassemblies of the machine, which precedes the process of calibrating the machine's control system.
APA, Harvard, Vancouver, ISO, and other styles
44

Funaru, Marian, and Gheorghe Stan. "Influence of Guideways Misalignment on the Positioning Precision of Kinematic Feed Chains Used on CNC Machine Tools." Applied Mechanics and Materials 657 (October 2014): 539–43. http://dx.doi.org/10.4028/www.scientific.net/amm.657.539.

Full text
Abstract:
The main goal of the kinematic feed chains used on numerically controlled machine tools is to ensure the relative position between the manufactured part and the cutting tool tip with a high accuracy. Therefore, the positioning precision is a major performance criterion for CNC machine tools. The guidance system of the machine table, together with the actuation system and the closed-loop control system, represents a key factor in manufacturing high precision machine tools. Mounting and alignment errors of guideways, both in vertical and horizontal directions, directly affect the table positioning precision and implicitly, the manufacturing precision of the machine tool. Guideways misalignment also generates stresses, plays and excessive run-out. The present paper contains a method of experimental analysis regarding the influence of guideways alignment errors on the positioning precision of the kinematic feed chains, which takes into account the alignment of the two guide rails, both in vertical and horizontal plans. The feed axis used in the experimental setup is closed-loop controlled, making use of an indirect position measurement system.
APA, Harvard, Vancouver, ISO, and other styles
45

LIGOMENIDES, PANOS A. "TOOLS FOR EXPERIENTIAL RECOGNITION." International Journal on Artificial Intelligence Tools 01, no. 03 (1992): 427–61. http://dx.doi.org/10.1142/s0218213092000272.

Full text
Abstract:
Our objective in the interactive formulation of the "formal description schema - fds" model is the modeling of the prototypical, i.e. the subjective, perceptual ability of a human "expert", the ultimate human or robotic decision maker. In this paper, we present our fds-approach and methodology for solving the problem of modeling and exercising perceptual recognition [3–6]. We limit our discussion to one-dimensional variational profiles. We view the fds-model as a two-stage procedural model. Concerning the "early" (pre-attentive) recognition stage, we define the "structural identity of a k-norm class, k∈K" — SkID — as a tool for quick shadowing of sensory data and positioning instantiations of sufficient resemblance to interactively pre-defined spatio–temporal norm classes. Attentive recognition tools follow for assessing conformity of SkID-pointed occurrences.
APA, Harvard, Vancouver, ISO, and other styles
46

Chiew, T. H., Z. Jamaludin, A. Y. Bani Hashim, N. A. Rafan, and L. Abdullah. "Identification of Friction Models for Precise Positioning System in Machine Tools." Procedia Engineering 53 (2013): 569–78. http://dx.doi.org/10.1016/j.proeng.2013.02.073.

Full text
APA, Harvard, Vancouver, ISO, and other styles
47

IBARAKI, Soichi, and Yusuke TANIZAWA. "Vision-Based Measurement of Two-Dimensional Positioning Errors of Machine Tools." Journal of Advanced Mechanical Design, Systems, and Manufacturing 5, no. 4 (2011): 315–28. http://dx.doi.org/10.1299/jamdsm.5.315.

Full text
APA, Harvard, Vancouver, ISO, and other styles
48

Li, Jie, Bin Mei, Chaolin Shuai, Xin-jun Liu, and Dawei Liu. "A volumetric positioning error compensation method for five-axis machine tools." International Journal of Advanced Manufacturing Technology 103, no. 9-12 (2019): 3979–89. http://dx.doi.org/10.1007/s00170-019-03745-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
49

Shinoda, Masahiro, Shinnosuke Hirata, and Hisayuki Aoyama. "Development of Wire-Connected Mechanism for Precise Positioning." Key Engineering Materials 523-524 (November 2012): 645–49. http://dx.doi.org/10.4028/www.scientific.net/kem.523-524.645.

Full text
Abstract:
Micro/nano positioning is one of important techniques to operate bio-cell and micro assembly. For realizing the precise positioning, the various piezo-driven stages have been already proposed and micro/nano scale resolution has been achieved. However, it is pointed out that the existing precision positioning tools are too large compared to operating area. Their devices are too difficult to combine other devices and use in tight environment like under microscope. In this paper, a precise positioning method with wire connected mechanism under microscope is proposed. The proposed positioning system is simply composed actuators including piezoelectric element and super extra-fine wires. By applying wire connected mechanism, the saving of larger work environment compared to traditional devices is hoped.
APA, Harvard, Vancouver, ISO, and other styles
50

Dr., Amadi Lawrence, and Ray Obasi Dr. "BRAND PRICE POSITIONING STRATEGY AND SALES TURNOVER OF FOOD AND BEVERAGE MANUFACTURING COMPANIES IN RIVERS STATE NIGERIA." GPH-International Journal of Social Science and Humanities Research 05, no. 01 (2022): 36–49. https://doi.org/10.5281/zenodo.6966810.

Full text
Abstract:
<em>The study investigated the relationship between brand price positioning strategy and sales turnover of food and beverage manufacturing firms in the Small and Medium Enterprises (SMEs) sector in Rivers State, Nigeria. The study adopted a descriptive research design. Data were drawn through questionnaires from 66 small-scale operators, 40 medium-scale operators making a total of 106 food and beverage manufacturing Entrepreneurs in the SMEs sector in Rivers State, and 384 customers of the said firms. The data collection instrument was validated by experts drawn from Entrepreneurship, Marketing, and Statistics and thereafter subjected to a reliability test using the Cronbach Alpha test which gave an average coefficient value of 0.764. A combination of descriptive and inferential statistical tools was employed to analyze the data with the aid of SPSS (version 21.0). The descriptive tools employed were tables, frequencies, percentages, mean, and standard deviation while Pearson Product Moment correlation analysis constituted the inferential tools employed for data analysis. The study findings revealed that brand price positioning strategy was critical in determining the outcome of sales turnover. It was found to have significant predictive capabilities on sales turnover. In conclusion, brand price positioning strategies had a significant statistical influence on sales turnover by food and beverage manufacturing&nbsp; SMEs in Rivers State. Precisely, 37.5%, changes in sales turnover were significantly predicted by brand price. Therefore, this study advocated the adoption of a brand price positioning strategy that will enhance the affordability of their products in the marketplace.</em>
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the bibliographies on the topic 'Positioning tools' for other source types:
Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography