To see the other types of publications on this topic, follow the link: Povrchový plazmon.
Dissertations / Theses on the topic 'Povrchový plazmon'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 30 dissertations / theses for your research on the topic 'Povrchový plazmon.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
1
Novák, Martin. "Vliv podleptání plazmonických antén na jejich optickou odezvu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-319862.
Full textAbstract:
Influence optical response on underetching of plasmonic antennas is observed in this thesis. When light falls with resonant wavelength on the optical antennas, the electromagnetic field is amplified near this antennas. The resonant wavelength depends on the length of the antenna and on effective refractive index given by the ambient properties around the antenna. The contact surface with substrate (dielectric) is reduced by underetching the antenna and the effective refractive index is changed and thus the optical response of the antenna is changed.
2
Valkovičová, Jiřina. "Syntéza koloidních zlatých nanotyčinek pro biomedicínské aplikace." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-221142.
Full textAbstract:
Diplomová práce se zabývá výrobou a využitím zlatých koloidních nanotyčinek v biomedicínských aplikacích. Konkrétně se zaměřuje na tři základní funkce nanočástic v analýze - transportní, separační a především zobrazovací. V části o využití nanočástic pro zobrazování je hlavní zájem věnován zejména povrchové plazmonové rezonanci zlatých nantyčinek. Dále je práce zaměřena na využití nanotyčinek pro termální terapii. Následující část je věnována vhodným modifikacím povrchu, hlavně za účelem zmírnění toxicity částic. Závěrem teoretické části jsou způsoby přípravy zlatých koloidních nanotyčinek a techniky jejich následné analýzy. V navazující experimetální části jsou uvedeny postupy, podmínky a výsledky provedených pokusů.
3
Kvapil, Michal. "Lokalizované povrchové plazmony: principy a aplikace." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229109.
Full textAbstract:
The diploma thesis deals with plasmonic nanostructures for visible eventually near-infrared region of electromagnetic spectrum. At first, there are discussed basic terms which are necessary for description of plasmonic nanostructures and their properties. Then the resonant properties of gold nanoantennas on a fused silica substrate and in proximity of nanocrystalline diamond are addressed. FDTD simulations are used for an assesment of resonant properties and local electric field enhancement of these nanostructures. Possible manufacturing methods of the antennas and techniques for the measurement of their properties are mentioned at the end of the thesis.
4
Hrtoň, Martin. "Modelování šíření povrchových plazmonů v grafenu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230614.
Full textAbstract:
The diploma thesis provides an introduction to electronic and optical properties of graphene, emphasizing thier tunability through the ambipolar field effect. Furthermore, an experiment, which would demonstrate the possible utilization of graphene in active plasmonics, is presented. The author focuses on light scattering simulations involving hybrid plasmonic structures made of noble metals and graphene. The scattering properties of those structures and their dependence on the density of free charge carriers in graphene are investigated. The author concludes that the proposed tuning of the response of a single metallic antenna through the electrostatic doping of graphene proves to be inefficient, and a more elaborate configuration will be required to enhance the effect and achieve the desired control.
5
Sedlák, Filip. "Povrchové úpravy skleněných vláken s využitím plazmové nanotechnologie." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2017. http://www.nusl.cz/ntk/nusl-295727.
Full textAbstract:
Diploma thesis is aimed at deposition of thin films on glass fibers using plasma-enhanced chemical vapor deposition from tetravinylsilane as a monomer. Such surface modified glass fibers were used as reinforcements for fabrication of polymer composites with unsaturated polyester resin as a matrix. Chemical and optical properties of prepared thin films were characterized using infared spectroscopy and spectroscopic ellipsometry. An influence of deposited thin films on the shear strength of composite material was observed using short-beam shear test.
6
Beránek, Jiří. "Povrchové plazmonové rezonance na koloidních nanočásticích." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230613.
Full textAbstract:
The presented diploma thesis is focused on the Localized Surface Plasmons (LSP). The far-field optical response of the colloidal solutions of gold nanoparticles caused by LSP was investigated and compared with the numerical calculations. For the simulations, the Discrete Dipole Approximation (DDA) and Finite-Difference Time Domain (FDTD) techniques were employed. In particular, the shape and size effects of spherical particles and nanorods were studied. The simulations performed by both methods are in a good agreement for the spheres. For the nanorods, the resonance was found to be affected markedly by their geometry. Also, broader resonance peaks were found. This effect was assigned to the sample size distribution and its influence is discussed by comparing the simulations with experiments. In addition, synthesis of nanorods was carried out as well. Finally, the results on the study of optical properties of silver clusters formed under equilibrium conditions are presented.
7
Širjovová, Veronika. "Optimalizace plazmatických povrchových úprav skleněných vláken." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2019. http://www.nusl.cz/ntk/nusl-401847.
Full textAbstract:
Diploma thesis deals with glass fiber surface modification using plasma-enhanced chemical vapor deposition in order to prepare functional interface that enhances the properties of polymer composites. The effect of deposition conditions on shear strength was observed with respect to the chemical composition of the deposited film. Thin films were deposited on planar substrates and fibers using monomer tetravinylsilane in a mixture with oxygen at selected power of plasma discharge. Chemical composition of prepared material was analyzed by infrared spectroscopy. Planar substrate film adhesion was measured using the scratch test. The composite sample was prepared by embedding the surface modified fibers in unsaturated polyester resin, followed by the curing process. The cured composite sample underwent the short beam shear test.
8
Veteška, Jaromír. "Plazmatické povrchové úpravy skleněných vláken na bázi organokřemičitanů." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2008. http://www.nusl.cz/ntk/nusl-216223.
Full textAbstract:
This thesis is aimed at preparation of thin plasma-polymerized films deposited on glass fibers by Plasma-Enhanced Chemical Vapor Deposition (PE CVD) from a mixture of tetravinylsilane (TVS) and oxygen gas. Plasma-polymerized films which were deposited on silicon wafers were used to characterize chemical properties and optimization of deposition process with respect to reproducibility.
9
Dvořák, Petr. "Studium vlastností povrchových plazmonových polaritonů na magnetických materiálech." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229810.
Full textAbstract:
The diploma thesis deals with the experimental study of surface plasmon polaritons (SPPs) on nano-structures with the Au/Co/Au multilayer. Plasmonic structures were prepared by the electron beam lithography and by the focused ion beam. A Scanning optical near-field microscope was used for detection of surface plasmon polaritons. SPPs were confirmed by the experiment with different polarizations of the illuminating light. Furthermore, differences in plasmon interference wavelengths was measured for different surface dielectric functions. Finally, the decantation of the SPPs interference image was measured in dependence on the external magnetic field.
10
Plichta, Tomáš. "Povrchová topografie a mechanické vlastnosti tenkých vrstev na bázi tetravinylsilanu." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2016. http://www.nusl.cz/ntk/nusl-240521.
Full textAbstract:
Proposed diploma thesis is focused on preparation and characterization of the plasma polymer thin films based on tetravinylsilane monomer (TVS). Plasma enhanced chemical vapour deposition (PECVD) method involving pulse and continual plasma discharge modes were used for thin film deposition on silicon wafer pieces. Reactive plasma composition was containing pure TVS or mixtures of TVS and argon or oxygen gas. Atomic force microscopy was used for surface topography and roughness characterization. Cyclic nanoindentation was involved to measurements to determine the Young’s modulus and hardness of prepared films and scratch test was performed to evaluate the degree of adhesion. Special attention was drawn to the characterization of films with a Young’s modulus below 10 GPa. Tip geometry of indenter influence on scratch test was also commented. Surface and mechanical properties of thin films in relation to the deposition conditions were correlated to the obtained results and final analysis of deposition conditions influence is proposed.
11
Blažková, Naďa. "Povrchová topografie a-CSi:H vrstev připravených v kontinuálním režimu PECVD." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2018. http://www.nusl.cz/ntk/nusl-376884.
Full textAbstract:
The thesis describes surface topography of a-CSi:H films deposited by continuous wave plasma enhanced chemical vapor deposition (PECVD) based on tetravinylsilane monomer (TVS). Thin films are completely used in many fields of modern technologies and their physical and mechanical properties are affected by thin film preparation techniques. In this thesis the thin films were deposited by PECVD method on silicon wafers with the pure TVS monomer. Deposited samples were topographically described and analyzed using atomic force microscopy (AFM). The main characteristics which were described are RMS roughness, autocorrelation function and a size distribution of grains on the thin film surface. Analysis was realized with two sets of samples with different powers and thickness. The main results were statistically evaluated like a mixture of object on the surface prepared in different deposition conditions.
12
Édes, Zoltán. "Fotoluminiscence zesílená plazmonovými polaritony." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230270.
Full textAbstract:
Diplomová práce se zabývá fotoluminiscencí polovodičových materiálů zesílené plazmonovými polaritony. Je popsána základní teorie interakce mezi lokalizovanými povrchovými plazmonovými polaritony a fotoluminiscenčními látkami. Dva mechanismy, které mohou vést k fotoluminiscenci zesílené plazmonovými polaritony jsou diskutovány. Následně je popsán návrh aparatury pro měření fotoluminiscence a způsob její realizace. Funkčnost aparatury je ověřena měřením fotoluminiscenčních spekter objemového GaN, nanokrystalického Si a CdTe kvantových teček. Nakonec je zkoumána metoda přípravy vzorků sestávajících z kovových nanokuliček a fotoluminiscenčně aktívních CdTe kvantových teček.
13
Dvořáková, Eva. "Využití plazmové trysky pro hojení ran." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2021. http://www.nusl.cz/ntk/nusl-444544.
Full textAbstract:
This diploma thesis was focused on the possibility of using a plasma nozzle to accelerate the wound healing process. The benefits of using low-temperature plasma in medicine or biomedical applications are known from many studies, and low-temperature plasma is already used to sterilize medical devices, materials or surgical instruments. Some studies also report a high potential of usinh plasma nozzle in the treatment of skin wounds. In the experimental part of this work, an in vitro wound healing test was performed using two different low-temperature plasma sources. Source No. 1 was a surface wave microwave discharge and source No. 2 was a torch microwave discharge. An in vitro scratch healing test was performed on a monolayer of HaCaT keratinocytes and testing was performed using various parameters. The influence of the plasma treatment time was monitored, as well as the influence of the plasma discharge power and also the influence of the argon working gas flow. Especially when using a torch microwave discharge, faster wound healing was recorded at most of the parameters used compared to the control. Thus, it can be said that this source appears to be potentially suitable for faster wound healing. Furthermore, in the work using the MTT cytotoxicity test, the viability of skin cells after their plasmination was also monitored using the same conditions as in the in vitro wound healing test. When performed in the standard MTT assay, none of the settings or sources used showed any cytotoxic effects on keratinocytes. LDH cytotoxicity tests were also performed concurrently to verify the accuracy of the MTT assays. The results of both tests agreed and the use of low-temperature plasma in skin treatment can be considered as safe. Overall, the results show that the plasma nozzle can find use in medicine in the healing of skin wounds and chronic defects as a potentially fast, inexpensive and effective method.
14
Kucserová, Aneta. "Příprava a charakterizace vrstev deponovaných metodou plazmové polymerace na bázi 2-ethyl-2-oxazolinu." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2020. http://www.nusl.cz/ntk/nusl-414168.
Full textAbstract:
The diploma thesis deals with the deposition of layers of 2-ethyl-2-oxazoline monomer in a dielectric barrier discharge in a nitrogen atmosphere. The theoretical part describes polyoxazolines, dielectric barrier discharge, plasma polymerization and diagnostic methods that describe the characteristics of the prepared layers. The experimental part deals with the deposition of layers and the determination of physicochemical properties. Finally, the results are compared with layers that were made of 2-methyl-2-oxazoline.
15
Biolek, Vladimír. "Optická odezva infračervených plazmonických antén za přítomnosti tenké vrstvy oxidu křemičitého." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-319933.
Full textAbstract:
The diploma thesis deals with the optical response of resonant infrared antennas on silicon dioxide thin film. At first, theory of electromagnetism at metal/dielectric interfaces is described. In the next part, experimental and numerical methods used in the thesis are described and strong coupling between two systems is explained. In the final part of the thesis, the optical response of resonant infrared antennas on a silicon dioxide thin film is studied by Fourier transform Infrared Spectroscopy and FDTD simulations which both show the strong coupling between localized plasmons and phonons in silicon dioxide.
16
Horák, Michal. "Elektronová mikroskopie a spektroskopie v plazmonice." Doctoral thesis, Vysoké učení technické v Brně. CEITEC VUT, 2020. http://www.nusl.cz/ntk/nusl-409364.
Full textAbstract:
Tato práce se zabývá mikroskopickými technikami využívajícími elektronový a iontový svazek pro přípravu a charakterizaci plazmonických nanostruktur. Analytická elektronová mikroskopie je představena se zaměřením na aplikace v oblasti plazmoniky. Důraz je kladen na spektroskopii energiových ztrát elektronů (EELS) a katodoluminiscenci. Dále je diskutována výroba plazmonických vzorků pro transmisní elektronovou mikroskopii, přičemž je kladen důraz na litografii iontovým svazkem a na přípravu vzorků za použití chemicky syntetizovaných částic ve vodném roztoku. Hlavní výzkumné výsledky práce jsou rozděleny do čtyř částí. První část se věnuje komparativní studii plazmonických antén vyrobených elektronovou a iontovou litografií. Přestože obě techniky jsou vhodné pro výrobu plazmonických antén, elektronová litografie by měla být upřednostňována před iontovou litografií díky lepší kvalitě výsledných antén a jejich silnější plazmonické odezvě. Antény vyrobené iontovou litografií mají neostré okraje, vykazují výrazné kolísání tloušťky a jsou také silně kontaminovány nejen organickými kontaminanty, ale také rezidui po iontové litografii včetně implantovaných iontů z iontového svazku a atomů titanové adhezivní vrstvy. Ve druhé části je zkoumán Babinetův princip komplementarity pro plazmonické nanostruktury na sérii zlatých diskových antén a komplementárních apertur ve zlaté vrstvě s různými průměry. Komplementarita je potvrzena pro základní plazmonické vlastnosti jako rezonanční energie, ale rozdíly způsobené omezenou platností Babinetova principu jsou patrné například pro prostorové rozložení blízkého pole plazmonových polaritonů. Třetí část shrnuje studii nanostruktur s funkčními vlastnostmi souvisejícími s lokálním zesílením elektrického a magnetického pole. Obzvlášť silné lokální zesílení pole vykazují plazmonické antény tvaru bowtie a diabolo, a to jak ve formě částic, tak ve formě apertur. Naše studie umožnila identifikovat několik módů lokalizovaných povrchových plazmonů v těchto anténách a charakterizovat jejich vlastnosti včetně energie módu, rozložení elektrické a magnetické složky blízkého pole módu, a kvalitativní rozložení uzlů náboje a proudu souvisejících oscilací elektronového plynu. Dále jsme studovali laditelnost energií módů v blízké infračervené a viditelné spektrální oblasti a zaměřili jsme se na Babinetovskou komplementaritu mezi přímými a invertovanými anténami. Poslední část je zaměřena na stříbrný amalgám, nový a velmi perspektivní plazmonický materiál. Změnou velikosti stříbrných amalgámových nanostruktur může být jejich plazmonová rezonance laděna od oblasti ultrafialového záření přes celou viditelnou až po infračervenou oblast. Jelikož stříbrný amalgám je dobře prozkoumán v oblasti elektrochemie, stříbrné amalgámové nanočástice otevírají možnost kombinovat plazmoniku a elektrochemii dohromady.
17
Břínek, Lukáš. "Plazmonické rezonanční antény." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228250.
Full textAbstract:
Tato diplomová práce se zabývala plazmonickými anténami pro infračervenou oblast spektra elektromagnetického záření. K hledání zesílení pole bylo použito FDTD (Finite-Difference Time-Domain Method) simulací. Podle očekávání, byla shledána lineární závislost rezonanční vlnové délky na délce raménka platinové antény na křemíkovém povrchu. Diplomová práce se také zabývala výrobou antén pomocí fokusovaného iontového svazku (FIB) a následným měřením rezonančních vlastností pomocí mikroskopické metody FT-IR (Fourier Transform Infrared Spectroscopy). Posun rezonanční vlnové délky byla registrována pouze pro negativní antény. Nakonec se tato práce zabývala vysvětlením saturace křivky závislosti rezonanční vlnové délky na rozměru raménka platinové antény na substrátu ze SRONu (silicon-rich oxynitride).
18
Vorel, Pavel. "Vlastnosti betonů s přídavkem plazmatem upravených polypropylenových vláken." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-225879.
Full textAbstract:
Master‘s thesis focuses on concrete combined with polypropylen fibres produced commercially, fibres without surface modifications and fibres modificated by plasma. Most important topic of the thesis is experimental verification of influence of plasma modificated fibres on attributes of fresh concrete and physical-mechanical attributes of solidified concrete. Based on the results of the tests perfomed on examin units compares results and anylyses applicability of different fibre surface modifications.
19
Adam, Pavel. "Povrchové plasmony v optických mikrostrukturách a jejich senzorové aplikace." Doctoral thesis, 2013. http://www.nusl.cz/ntk/nusl-330368.
Full textAbstract:
Title: Surface plasmons in optical microstructures and their sensor applications Author: Pavel Adam Institute: Institute of Photonics and Electronics AS CR, v.v.i., Department of Optical Sensors Supervisor of the doctoral thesis: doc. Ing. Jiří Homola, CSc., DSc. Abstract: This work is focused on the study of surface plasmon resonance (SPR) sensor platforms based on wavelength division multiplexing (WDM) of multiple surface plasmons (SPs). These sensors are based on advanced diffraction gratings supporting either conventional or Bragg-scattered SPs, which are simultaneously excited at different wavelengths. These SPs are studied both analytically and numerically using rigorous coupled-wave analysis and an integral approach. WDM of two and three SPs is presented and followed by the method for the analysis of the resolution, noise and cross-sensitivity. This method is employed to analyze the ability of different SPR sensor platforms (supporting WDM of two SPs) to discriminate refractive index (RI) changes in a thin layer at the sensor surface from background RI changes. The WDM SPR sensors based on advanced diffraction gratings prepared by interferometric holography are developed and tested in a model biosensing experiment consisting of the layer-by-layer growth of protein multilayers. The linear WDM of two...
20
Piliarik, Marek. "Mikroskopie využívající povrchové plazmony." Doctoral thesis, 2008. http://www.nusl.cz/ntk/nusl-292736.
Full text
21
TROUP, František. "Povrchová funkcionalizace materiálů s využitím plazmových technologií." Master's thesis, 2014. http://www.nusl.cz/ntk/nusl-252594.
Full textAbstract:
This thesis deals with the plasma functionalization of nanofiber materials for biomedical applications. Nanofibers of SiO2 and PCL was functionalized using a microwave plasma in order to establish amine functional groups. The work includes theoretical assumptions selection of these materials, their properties and current use with emphasis on biomedical applications. The paper also presents the theoretical foundations of plasma technology, their principles and practical applications. The experimental part of the work includes the optimization of process parameters for each nanofiber materials, review hydrophilisation surface and material degradation through SEM and private functionalization. In conclusion outlines proposals for further action beyond the experiments of this work.
22
Vala, Milan. "Komplexní difraktivní struktury pro senzory s povrchovými plazmony." Doctoral thesis, 2015. http://www.nusl.cz/ntk/nusl-333785.
Full textAbstract:
Title: Complex diffractive structures for surface plasmon resonance sensors Author: Milan Vala Institute of Photonics and Electronics ASCR, v.v.i. Supervisor of the doctoral thesis: Prof. Jiří Homola, Ph.D., DSc. Institute of Photonics and Electronics, ASCR, v.v.i. Abstract: Nowadays, biosensors based on surface plasmon resonance (SPR) present one of the most advanced label-free optical biosensor technologies. These sensors are based on the monitoring of refractive index changes in the vicinity of a plasmonic metal and enable both rapid and sensitive detection of various biological or chemical agents as well as the analysis of biomolecular interactions in real time. This doctoral thesis presents the results of research of advanced diffractive structures having benefits for SPR biosensor technology. In addition to a theoretical analysis, this work consists of the fabrication and characterization of selected diffractive structures, and furthermore, the development of novel types of SPR biosensors based on these structures. In particular, the results presented in this thesis include the development of a novel method of fabrication of periodic plasmonic arrays based on multiple-beam interference lithography, the development of compact high-resolution diffraction grating-based SPR devices, and development of...
23
Darebník, Peter. "Studium a využití povrchových plazmonů v terahertzové spektrální oblasti." Master's thesis, 2016. http://www.nusl.cz/ntk/nusl-346978.
Full textAbstract:
Title: Study and application of surface plasmons in terahertz spectral range Author: Peter Darebník Department: Department of Chemical Physics and Optics Supervisor: doc. RNDr. Petr Kužel, Dr., department of Chemical Physics and Optics - external employee Abstract: The goal of this thesis is analytical, numerical and experimental study of surface plasmons in terahertz spectral range The description of the surface plasmon propagation along metal/dielectric interface can be done purely analytically. Our goal is to obtain the description of the surface plasmon propagating in more complex dielectric layered structures which are in contact with metallic layer. Analysis of the surface plasmon dispersion curves in anisotropic layered structure was done numerically. Existing transmission terahertz spectroscopy experiment was expanded by an arrangement that allows us to excite the surface plasmon on the metallic layer and allows us to measure its characteristics after the transmission of samples, that are in contact with this layer. Obtained theoretical and experimental data were then evaluated, so we could conclude to which extent can the surface plasmon be used for spectroscopic purposes in terahertz range. We concluded, that we were able to describe surface plasmons in layered structures including anisotropic...
24
HRUŠKOVÁ, Iveta. "Modifikace povrchových vlastností plasmatem u semen." Master's thesis, 2009. http://www.nusl.cz/ntk/nusl-47850.
Full textAbstract:
Aim of diploma work is research of plasma influence on seed germination in some plant species (wheat and oat). The complex work includes parts both physical-technological and biological. The work discusses a selection of useful seeds for the plasma treatment and describes parameters of plasma processing. It discusses results of germination testing and early growth of seedlings. Parts of the work are electron microscopy output, data processing result, and appendix.
25
Vaidulych, Mykhailo. "Plazmové opracování porézních povrchů." Doctoral thesis, 2019. http://www.nusl.cz/ntk/nusl-409252.
Full textAbstract:
Title: Plasma treatment of porous structures Author: Mykhailo Vaidulych Department / Institute: Department of Macromolecular Physics Supervisor of the doctoral thesis: Prof. Assist. Jan Hanuš, Ph.D., Department of Macromolecular Physics Abstract: The thesis is focused on the implementation of low-temperature plasma for the modification of porous materials. Two main strategies are involved: functionalization through the deposition of functional nanocomposite coatings and low-pressure plasma etching. In the first case, a gas-phase step-by-step deposition process based on the combination of deposition of nanoparticles and thin films was developed to obtain super-wettable nanocomposite coatings on filtration membranes. It was shown that the deposition parameters of thin films and particles of plasma polymer can tune the wetting characteristic of the membranes whereas embedding copper nanoparticles endows them with antibacterial properties. As a result, highly efficient superhydrophobic/superoleophilic and smart superamphiphilic membranes were successfully fabricated for oil/water separation. Plasma processing in the atmosphere of argon, oxygen or nitrogen was utilized to modify hard metal/polymer nanocomposites (Ag/a-C:H) with potential to be used as functional coatings for bone implants. An anisotropic etching...
26
PEKÁREK, Michal. "Optimalizace depozičních parametrů za účelem vytvoření fotokatalytických titanoxidových vrstev metodou PECVD." Master's thesis, 2013. http://www.nusl.cz/ntk/nusl-153375.
Full textAbstract:
This thesis presents Photocatalytic TiOx layers created by own PECVD reactor assembled in the building of Department of Applied Physics and Technics. Parameters of depositions were optimalized as well as the PECVD reactor itself. Final layers are compared to layers made by Degussa P25. As a result based on the included measurements, this thesis tries to answer the question whether PECVD is the suitable method for depositions of photocatalytic layers.
27
Bocková, Markéta. "Multifunkční biomolekulární soubory pro paralelizovanou analýzu biomolekulárních interakcí." Doctoral thesis, 2019. http://www.nusl.cz/ntk/nusl-404427.
Full textAbstract:
Title: Multifunctional biomolecular assemblies for parallelized analysis of biomolecular interactions Author: Markéta Bocková Department / Institute: Institute of Physics, Charles University Supervisor of the doctoral thesis: Prof. Jiří Homola, Ph.D., DSc., Institute of Photonics and Electronics, The Czech Academy of Sciences Abstract: Surface plasmon resonance (SPR) biosensors represent the most advanced optical method for the direct, real-time monitoring of biomolecular interactions without the need for labelling. This doctoral thesis aims to advance the SPR biosensor method and to expand its utility in the investigation of biomolecular interactions. This encompasses activities on two major fronts of SPR biosensor research - immobilization methods and biosensing methodologies. Methods for the immobilization of biomolecules were researched with the aim of enabling the immobilization of a broad range of biomolecules on the SPR biosensor surface in a spatially controlled manner. The development of novel biosensing methodologies was pursued in order to address the current limitations of SPR biosensors associated with non-specific adsorption and limited analyte transport, and thus to improve the accuracy and robustness of SPR biosensor measurements. Finally, advances in the development of immobilization...
28
KALA, Jaroslav. "Gliding Arc." Master's thesis, 2012. http://www.nusl.cz/ntk/nusl-136169.
Full textAbstract:
The thesis is focused on increasing the surface tension of polyethylen, using plasma. A gliding arc was chosen for this surface modi cation. The theoretical part includes an overview of gas discharges, their classi cation, properties and technical applications, and deals with an in uence of surface tension on surface modi cations of materials. The experiment is explained in the practical part, a jet analysis carried out before the experiment is described. Results of the experiment are presented.
29
HOUSER, František. "Plazmatický výboj generovaný surfatronem s frekvencí 2,45 GHz." Master's thesis, 2007. http://www.nusl.cz/ntk/nusl-46787.
Full textAbstract:
This diploma thesis deals mainly with utilization of plasma in technological aplications. The introductory part is apllied to the theoretical description of plasma generated by the surfatron. This launcher works with the frequency of 2,45 GHz and it is able to excite the surface wave, that sustains plasma column in a quartz tube. Plasma generated by surfatron was used for modification of surface properties of polyethylen to change its surface energy. By changing of surface energy it was reached of higher hydrophilicity. Plasma generated by surfatron was diagnosed in detail during experiments in a continual regime as well as in a pulse one with a help of a single {--} probe and a double {--} probe Langmuir measurement. In this diploma thesis there is discussed influence of pressure, power and other experimental options.
30
GÜNZEL, Martin. "Metody depozice tenkých vrstev pomocí nízkoteplotního plazmatu." Master's thesis, 2013. http://www.nusl.cz/ntk/nusl-156150.
Full textAbstract:
This thesis is focused on the description of selected deposition methods of thin films using low-temperature plasma. Currently, many various technologies of thin films are developed and there are many applications in various industrial sectors. This thesis first gives a brief overview of deposition methods, plasma behavior during deposition and subsequent description of the selected methods of application due to the physical and chemical processes. They also discussed the advantages and disadvantages of the described coating technologies, and several examples of their use. The thesis should thus contribute to the overall view of modern coating technologies, their development and use currently, or possible use in the future.