Log in

Relevant bibliographies by topics / Powder Characterization

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Powder Characterization'

Author: Grafiati

Published: 4 June 2021

Last updated: 14 March 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Powder Characterization.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Powder Characterization"

1

McCauley, James. "Standardizing Powder Characterization." Materials and Processing Report 2, no. 11 (February 1988): 1–2. http://dx.doi.org/10.1080/08871949.1988.11752132.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Ramakrishnan, P. "Powder Characterization Techniques." Materials Performance and Characterization 9, no. 4 (April 1, 2020): 20190162. http://dx.doi.org/10.1520/mpc20190162.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Li, B., Xin Long Wang, B. Guo, Yu Mei Xiao, Hong Song Fan, and Xing Dong Zhang. "Preparation and Characterization of Nano Hydroxyapatite." Key Engineering Materials 330-332 (February 2007): 235–38. http://dx.doi.org/10.4028/www.scientific.net/kem.330-332.235.

Full text

Abstract:

The aim of this study is to prepare nano hydroxyapatite powder. Hydroxyapatite powder was prepared via co-precipitated method with the addition of citric acid at pH 9-11 in ambient environment. The precipitates were aged for 24hs, and then milled into powder after washed and dried. The particle morphology and particle size of as prepared HA powders were characterized. The results showed that hydroxyapatite powder with width of 10-30nm and length of 30-100nm was prepared by wet co-precipitation.

APA, Harvard, Vancouver, ISO, and other styles

4

Gorji, N. E., R. O’Connor, and D. Brabazon. "XPS, SEM, AFM, and Nano-Indentation characterization for powder recycling within additive manufacturing process." IOP Conference Series: Materials Science and Engineering 1182, no. 1 (October 1, 2021): 012025. http://dx.doi.org/10.1088/1757-899x/1182/1/012025.

Full text

Abstract:

Abstract Powder recycling and reducing the waste metallic powder is EU’s key provision in waste framework directive (2008/98/EC). The aim of this investigation is to analyse the correlation between the surface and morphology properties of (virgin and recycled) powders and the microstructure and mechanical properties of the 3D printed parts (made of three powders). Two biomedical Tibia implants have been 3D printed from virgin and 3-5 times recycled powders of stainless steel 316L. For this, the surface composition and microstructure of the powders has been characterized and correlated to the nanoindentation measurements carrier out on these implants. X-ray surface spectroscopy (XPS) has been used to analyse the oxidation level on the powder’s surface revealing less than 10% more oxygen on the surface of recycled powders. SEM analysis shows less than 5 μm difference in powder size distribution even though the shape and circularity of the recycled powders seem to be affected under several reusing cycles. The size of the powder particles does not show much difference but satellites and binding between the powders increased in recycled powder. The hardness and effective modulus of the parts from recycled powders are significantly smaller than the virgin-made implants, which could be due to higher porosity present in the recycled powder or due to oxygen increment on recycled powder. The surface roughness (AFM analysis) has slightly increased on part made of recycled powders. However, the overall morphology shows little difference between the two parts.

APA, Harvard, Vancouver, ISO, and other styles

5

Berger, L.-M. "Powder characterization by adsorption." Metal Powder Report 47, no. 10 (October 1992): 51. http://dx.doi.org/10.1016/0026-0657(92)91908-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Condruz, Mihaela Raluca, Gheorghe Matache, and Alexandru Paraschiv. "Characterization of IN 625 recycled metal powder used for selective laser melting." Manufacturing Review 7 (2020): 5. http://dx.doi.org/10.1051/mfreview/2020002.

Full text

Abstract:

Additive manufacturing of high-quality materials by Selective Laser Melting depends not only on establishing appropriate process parameters, but also on the characteristics of the metal powders used and their stability over time or after recycling. The aim of the research was to characterize the IN 625 powder used over multiple manufacturing cycles with a Lasertec 30 SLM machine. In order to achieve the research's goal, virgin and recirculated powder's physical and technological characteristics were investigated. A decrease in all D-values (D10, D50, D90) of the powder size distribution was observed after multiple recirculation cycles showing a decrease of the powder dimensional range over time. Both virgin and recirculated powders are composed of mainly spherical particles, but elongated particles and satellite particles were observed as well. The dimensional evolution analysis showed a deviation from the powder ideal roundness, deviation that is more pronounced over multiple recirculation cycles. It was experimentally determined that the powders present a good flowability based on the flow rate value obtained for both virgin and recirculated powders, confirmed also by the Hausner ratio and angle of repose.

APA, Harvard, Vancouver, ISO, and other styles

7

Li, Hui Qin, Ji Xian Gong, and Yi Zhang. "Characterization of Protein Powder from Waste Rabbit Hair." Advanced Materials Research 194-196 (February 2011): 407–10. http://dx.doi.org/10.4028/www.scientific.net/amr.194-196.407.

Full text

Abstract:

Rabbit hair is an important animal fiber in China, making up 90% of the total output in the world. Fuds is one of familiar problems in the processing of rabbit hair, which lead to plenty of waste fibers. Recently, there has been interest in converting protein fibers into powder to develop their new uses. This provides great opportunities for waste rabbit hair. In this study, rabbit hair powders have been produced and the structure and properties were characterized at multi-level. Surface morphology of rabbit hair powders was observed by scanning electron microscopy (SEM) and the majority of rabbit hair powders appear to be small fibrous particles. The FTIR spectrum of rabbit hair and rabbit hair powders was detected. Although no new chemical bonds were produced in the rabbit hair powders, the result showed that some absorbing peaks of rabbit hair powder become stronger than that of rabbit hair. Absorption of rabbit hair powders was also investigated. The result showed that rabbit hair powder had higher moisture retention rate than that of rabbit hair, wool fiber and cotton fiber. Moreover, rabbit hair powder showed remarkable sorption ability for metal ions. The characterization of rabbit hair powder will provide useful basal data for the further application of rabbit hair in novel areas.

APA, Harvard, Vancouver, ISO, and other styles

8

Chike, Onuchukwu Godwin, Norhayati Binti Ahmad, and Uday Basheer Al-Naib. "Taxonomy on the production processes and characterization of powder metallurgy used in additive manufacturing process." Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, no. 6 (December 25, 2022): 52–58. http://dx.doi.org/10.33271/nvngu/2022-6/052.

Full text

Abstract:

Purpose. This article presents a concise and comprehensive review of the technologies that are typically used for manufacturing metal powders as well as the implications that particle features have on the properties of additive manufacturing (AM) techniques. Methodology. We surveyed various experiments that have taken place on the effects of the qualities of the powder and how to guarantee the dependability and reproducibility of the parts that are manufactured as well as ways of optimizing a powders performance. We classified the methods for producing metallic powders and highlighted the benefits, limitations, and image analysis of major production techniques. Findings. The usage of different approaches to metallic powder characterization for the analysis of the physical, mechanical, and chemical processes has contributed to major steps in powder optimization. The characterization of these powders is critical for ensuring adequate additive material dimensions and specifications and recording the properties of powders used in an AM and bridging the gap of comprehension concerning the end output in AM. Originality. This paper provides a thorough analysis of the efforts made in the powder characterization of AM components for the interpretation of the impact on the part materials qualities and characteristics. Metallic powder characterization has contributed to substantial progress toward powder optimization in the analysis of particle structures. Practical value. As the application of AM technology is moving away from the creation of prototypes and toward the production of finished products, it becomes important to understand the powder properties necessary to manufacture high-quality elements consistently.

APA, Harvard, Vancouver, ISO, and other styles

9

Young, Benjamin, Joseph Heelan, Sean Langan, Matthew Siopis, Caitlin Walde, and Aaron Birt. "Novel Characterization Techniques for Additive Manufacturing Powder Feedstock." Metals 11, no. 5 (April 27, 2021): 720. http://dx.doi.org/10.3390/met11050720.

Full text

Abstract:

Additive manufacturing is a rapidly expanding field, encompassing many methods to manufacture parts and coatings with a wide variety of feedstock. Metal powders are one such feedstock, with a range of compositions and morphologies. Understanding subtle changes in the feedstock is critical to ensure successful consolidation and quality control of both the feedstock and manufactured part. Current standards lack the ability to finely distinguish almost acceptable powders from barely acceptable ones. Here, novel means of powder feedstock characterization for quality control are demonstrated for the solid-state AM process of cold spray, though similar methods may be extrapolated to other additive methods as well. These characterization methods aim to capture the physics of the process, which in cold spray consists of high strain rate deformation of solid-state feedstock. To capture this, in this effort powder compaction was evaluated via rapidly applied loads, flowability of otherwise non-flowable powders was evaluated with the addition of vibration, and powder electrical resistivity was evaluated through compaction between two electrodes. Several powders, including aluminum alloys, chromium, and cermet composites, were evaluated in this effort, with each case study demonstrating the need for non-traditional characterization metrics as a means of quality control and classification of these materials.

APA, Harvard, Vancouver, ISO, and other styles

10

Lapčík, Lubomír, Martin Vašina, Barbora Lapčíková, David Hui, Eva Otyepková, Richard W. Greenwood, Kristian E. Waters, and Jakub Vlček. "Materials characterization of advanced fillers for composites engineering applications." Nanotechnology Reviews 8, no. 1 (December 31, 2019): 503–12. http://dx.doi.org/10.1515/ntrev-2019-0045.

Full text

Abstract:

Abstract Four different minerals were investigated; hollow spheres of calcium carbonate, platy mica, needle like wollastonite and glassy perlite and characterized via iGC for surface energy, Freeman powder rheology for flow characterization, cyclic uniaxial die compaction for modulus of elasticity and frequency dependent sound absorption properties. Particle surface energy and particle shape strongly affected the packing density of powder beds. In the case of higher porosity and thus lower bulk density, the powders acoustic absorption was higher in comparison with higher packing density materials. Surface energy profiles and surface energy distributions revealed clear convergence with powder rheology data, where the character of the powder flow at defined consolidation stresses was mirroring either the high cohesion powders properties connected with the high surface energy or powder free flowing characteristics, as reflected in low cohesion of the powder matrix.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Powder Characterization"

1

Cordts, Eike [Verfasser]. "Advanced Powder Characterization Techniques for Inhalation Powder Mixtures / Eike Cordts." Kiel : Universitätsbibliothek Kiel, 2014. http://d-nb.info/1064175279/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Markusson, Lisa. "Powder Characterization for Additive Manufacturing Processes." Thesis, Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-62683.

Full text

Abstract:

The aim of this master thesis project was to statistically correlate various powder characteristics to the quality of additively manufactured parts. An additional goal of this project was to find a potential second source supplier of powder for GKN Aerospace Sweden in Trollhättan. Five Inconel® alloy 718 powders from four individual powder suppliers have been analyzed in this project regarding powder characteristics such as: morphology, porosity, size distribution, flowability and bulk properties. One powder out of the five, Powder C, is currently used in production at GKN and functions as a reference. The five powders were additively manufactured by the process of laser metal deposition according to a pre-programmed model utilized at GKN Aerospace Sweden in Trollhättan. Five plates were produced per powder and each cut to obtain three area sections to analyze, giving a total of fifteen area sections per powder. The quality of deposited parts was assessed by means of their porosity content, powder efficiency, geometry and microstructure. The final step was to statistically evaluate the results through the analysis methods of Analysis of Variance (ANOVA) and simple linear regression with the software Minitab. The method of ANOVA found a statistical significant difference between the five powders regarding their experimental results. This made it possible to compare the five powders against each other. Statistical correlations by simple linear regression analysis were found between various powder characteristics and quality of deposited part. This led to the conclusion that GKN should consider additions to current powder material specification by powder characteristics such as: particle morphology, powder porosity and flowability measurements by a rheometer. One powder was found to have the potential of becoming a second source supplier to GKN, namely Powder A. Powder A had overall good powder properties such as smooth and spherical particles, high particle density at 99,94% and good flowability. The deposited parts with Powder A also showed the lowest amount of pores compared to Powder C, a total of 78 in all five plates, and sufficient powder efficiency at 81,6%.

APA, Harvard, Vancouver, ISO, and other styles

3

Tao, Runzhi. "Preparation and Characterization of Ultrafine Si3N4 Powder." Doctoral thesis, Universite Libre de Bruxelles, 1996. http://hdl.handle.net/2013/ULB-DIPOT:oai:dipot.ulb.ac.be:2013/212344.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Barnhart, Bradley K. Barnhart. "Characterization of Powder and the Effects of Powder Reuse in Selective Laser Melting." Case Western Reserve University School of Graduate Studies / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=case1500493469109699.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Dombrowski, David E. "Rapidly solidified Nb-Al powder : production and characterization." Thesis, Massachusetts Institute of Technology, 1991. http://hdl.handle.net/1721.1/13690.

Full text

Abstract:

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 1991.
Includes bibliographical references (leaves 271-275).
by David Edward Dombrowski.
Ph.D.

APA, Harvard, Vancouver, ISO, and other styles

6

Zeybek, Asim. "Characterization of industrial powder metallurgy produced 410L ODS steel." Thesis, Open University, 2012. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.580143.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Karaagac, Hakan. "Electrical, Structural And Optical Properties Of Aggase2-xsx Thin Films Grown By Sintered Powder." Phd thesis, METU, 2010. http://etd.lib.metu.edu.tr/upload/12612362/index.pdf.

Full text

Abstract:

In the present study, the effect of S and Se substitution on structural, electrical and optical properties of AgGa(Se2-xSx) thin films has been investigated. AgGa(Se0.5S0.5 )2 thin films were prepared by using the thermal evaporation method. X-ray diffraction (XRD) analysis has revealed that the transformation from amorphous to polycrystalline structure took place at about 450 oC. The detailed information about the stoichometry and the segregation mechanisms of the constituent elements in the structure has been obtained by performing both energy dispersive X-ray analysis (EDXA) and X-ray photoelectron spectroscopy (XPS) measurements. AgGaSe2 thin films were deposited by using both electron-beam (e-beam) and sputtering techniques. In e-beam evaporated thin films, the effect of annealing on the structural and morphological properties of the deposited films has been studied by means of XRD, XPS, scanning electron microscopy (SEM) and EDXA measurements. Structural analysis has shown that samples annealed between 300 and 600 oC were in polycrystalline structure with co-existance of Ag, Ga2Se3, GaSe, and AgGaSe2. The variation of surface morphology, chemical composition and bonding nature of constituent elements on post-annealing has been determined by EDXA and XPS analyses. AgGaSe2 thin films were also prepared by using sputtering technique. XRD measurements have shown that the mono-phase AgGaSe2 structure is formed at annealing temperature of 600 oC. The crystal-field and spin-orbit splitting levels were resolved. These levels around 2.03 and 2.30 eV were also detected from the photospectral response measurements. Thin films of Ag-Ga-S (AGS) compound were prepared by using AgGaS2 single crystalline powder and deposition of the excess silver (Ag) intralayer with double source thermal evaporation method. As a consequence of systematic optimization of thickness of Ag layer, Ag(Ga,S) with the stoichiometry of AgGa5S8 and AgGaS2 were obtained and systematic study to obtain structural, electrical and optical properties was carried out.

APA, Harvard, Vancouver, ISO, and other styles

8

Pan, Qi. "Laser ablative production of metallic and ceramic ultrafine powders : plasma plume analysis and powder characterization." HKBU Institutional Repository, 1998. http://repository.hkbu.edu.hk/etd_ra/170.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Çelik, Emrah Güden Mustafa Thesis advisor. "Preparation and characterization of sintered Ti-6A1-4V powder compacts/." [s.l.]: [s.n.], 2004. http://library.iyte.edu.tr/tezler/master/malzemebilimivemuh/T000472.doc.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Schiano, Serena. "Dry granulation using roll compaction process : powder characterization and process understanding." Thesis, University of Surrey, 2017. http://epubs.surrey.ac.uk/813905/.

Full text

Abstract:

In recent years, dry granulation using roll compaction (DGRC) attracts considerable interest of engineers and researchers, especially in the pharmaceutical industry, due to its distinct feature that no liquid binder is needed. It is generally anticipated that as a size enlarge process, DGRC would improve properties of feed powders (such as flowability and bulk density), but it was also reported that DGRC could cause a reduction in powder compactibility. A wide range of powder properties, such as size, shape, flowability, compactibility and compressibility, were analysed for several pharmaceutical excipients using the state of art techniques. Elastic-plastic properties of single component powders and mixtures were also determined using the Drucker Prager Cap (DPC) model and an example of FEM application was presented. All the properties determined were used to investigate: 1) the prediction of ribbon milling from friability tests and 2) the effect of granule size on die filling and die compaction behaviour of pharmaceutical powders. A new and easy method was developed for predicting fines produced during ribbon milling. An exponential relation between the filling ratio and the shoe speed was found. Furthermore, it is shown that flowability is strongly influenced by the granule size, and there is a decrease in the tensile strength with the increase of the granule size. Additionally, for all the materials analysed a strong correlation between the flow indexes and the critical filling speed was observed and an empirical equation is obtained.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Powder Characterization"

1

Y, Zavalij Peter, ed. Fundamentals of powder diffraction and structural characterization of materials. New York: Springer, 2005.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Y, Zavalij Peter, ed. Fundamentals of powder diffraction and structural characterization of materials. Boston: Kluwer Academic Publishers, 2003.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Y, Zavalij Peter, ed. Fundamentals of powder diffraction and structural characterization of materials. 2nd ed. New York: Springer, 2009.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Kolb, Ute. Uniting Electron Crystallography and Powder Diffraction. Dordrecht: Springer Netherlands, 2012.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Workshop on Synthesis and Characterization of Inorganic Powders (2011 Kunming, China). Chinese ceramics communications II: Selected, peer reviewed papers from the 2011 Workshop on Synthesis and Characterization of Inorganic Powders, July 20-22, 2011,Kunming, China. Durnten-Zurich, Switzerland: Trans Tech Publications, 2012.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

J, Lavernia Enrique, Henein Hani, Anderson Iver, and TMS Synthesis and Analysis in Materials Processing Committee., eds. Synthesis & analysis in materials processing: Characterization & diagnostics of ceramics & metal particulate processing : proceedings of a symposium. Warrendale, Pa: Minerals, Metals & Materials Society, 1989.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Ali, M. El Sayed. Practical application of stepwise isothermal dilatometry for characterization of sinterability of powder compacts. Roskilde: Riso National Laboratory, 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Ceramic Powder Science and Technology: Synthesis, Processing, and Characterization Conference (1986 Boston, Mass.). Ceramic powder science [proceedings of the Ceramic Powder Science and Technology: Synthesis, Processing, and Characterization Conference, August 3-6, 1986, Boston, Massachusetts]. Westerville, Ohio: American Ceramic Society, 1987.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Stoner, Troy A. Preparation of Extinction Free Gamma Ti-51at.%Al Alloy Powder and Characterization by X-ray Diffraction. Monterey, California: Naval Postgraduate School, 1992.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

B, Gurganus T., Walker J. A. 1939-, and Langley Research Center, eds. Development and characterization of powder metallurgy (PM) 2XXX series Al alloy products and metal matrix composite (MMC 2XXX Al/SiC materials for high temperature aircraft structural applications. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1992.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Powder Characterization"

1

Sigmund, Wolfgang, Vasana Maneeratana, and Shu-hau Hsu. "Powder Characterization." In Ceramics Science and Technology, 337–68. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2014. http://dx.doi.org/10.1002/9783527631940.ch44.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Sigmund, Wolfgang, Vasana Maneeratana, and Shu-hau Hsu. "Powder Characterization." In Ceramics Science and Technology, 337–68. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2012. http://dx.doi.org/10.1002/9783527631957.ch13.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Endoh, Shigehisa. "Particle Shape Characterization." In Powder Technology Handbook, 19–26. Fourth edition. | Boca Raton, FL : Taylor & Francis Group, LLC, 2020.: CRC Press, 2019. http://dx.doi.org/10.1201/b22268-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Hassan, Rubia, and Kantesh Balani. "Powder Characterization and Synthesis." In Fundamentals of Thermal Spraying, 131–63. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003321965-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Kong, Ling Bing, Yizhong Huang, Wenxiu Que, Tianshu Zhang, Sean Li, Jian Zhang, Zhili Dong, and Dingyuan Tang. "Powder Characterization and Compaction." In Transparent Ceramics, 191–290. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-18956-7_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Ishida, Naoyuki, and Vincent S. J. Craig. "Characterization by Atomic Force Microscope." In Powder Technology Handbook, 53–58. Fourth edition. | Boca Raton, FL : Taylor & Francis Group, LLC, 2020.: CRC Press, 2019. http://dx.doi.org/10.1201/b22268-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Kaye, Brian H. "Particle Size Characterization." In Handbook of Powder Science & Technology, 1–34. Boston, MA: Springer US, 1997. http://dx.doi.org/10.1007/978-1-4615-6373-0_1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Kaye, Brian H. "Particle Shape Characterization." In Handbook of Powder Science & Technology, 35–52. Boston, MA: Springer US, 1997. http://dx.doi.org/10.1007/978-1-4615-6373-0_2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Aranda, M. A. G., A. G. De la Torre, and L. León-Reina. "Powder-diffraction characterization of cements." In International Tables for Crystallography, 855–67. Chester, England: International Union of Crystallography, 2019. http://dx.doi.org/10.1107/97809553602060000986.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Stavitski, Eli. "Infrared Spectroscopy on Powder Catalysts." In In-situ Characterization of Heterogeneous Catalysts, 241–65. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118355923.ch9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Powder Characterization"

1

Søgaard, Søren, Mette Bryder, Morten Allesø, and Jukka Rantanen. "Characterization of powder properties using a powder rheometer." In The 2nd Electronic Conference on Pharmaceutical Sciences. Basel, Switzerland: MDPI, 2012. http://dx.doi.org/10.3390/ecps2012-00825.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Schmid, Manfred, Marc Vetterli, and Konrad Wegener. "Polymer powders for laser-sintering: Powder production and performance qualification." In MATERIALS CHARACTERIZATION USING X-RAYS AND RELATED TECHNIQUES. Author(s), 2019. http://dx.doi.org/10.1063/1.5088258.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Hou, T. H., and T. L. St. Clair. "Characterization of a Semicrystalline Polyimidesulfone Powder." In SAE International Congress and Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1988. http://dx.doi.org/10.4271/880112.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Lyckfeldt, Ola. "Metal Powder Characterization for 3D Printing." In Proceedings of the 4M/ICOMM2015 Conference. Singapore: Research Publishing Services, 2015. http://dx.doi.org/10.3850/978-981-09-4609-8_142.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Manickavasagam, Siva, Craig Saltiel, M. P. Menguec, Martin L. Sadowski, and Zbigniew M. Drozdowicz. "Fractal characterization of nanoscale powder agglomerates." In Workshop on Nanostructure Science, Metrology, and Technology, edited by Martin C. Peckerar and Michael T. Postek, Jr. SPIE, 2002. http://dx.doi.org/10.1117/12.438491.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Aizawa, Tatsuhiko, and Takashi Iwai. "Granular Modeling for Powder-Binder Compound Characterization in Powder Injection Molding." In ASME 1998 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/imece1998-0463.

Full text

Abstract:

Abstract New granular modeling is proposed to deal with the powder morphology. The simple shear viscosity testing is utilized to computationally measure the variation of relative viscosity with increasing shear strain or solid loading ratio of particles. Abrupt increase of non-newtonian viscosity with increasing the loading ratio has close relationship with the forced orientation of irregularly-shaped particles. This interparticle interaction reveals on the effect of powder morphology on the actual viscous behavior of the powder-binder compound in the powder injection molding.

APA, Harvard, Vancouver, ISO, and other styles

7

Barbuta, Marinela. "CHARACTERIZATION OF POLYMER CONCRETE WITH CALCAREOUS POWDER." In 14th SGEM GeoConference on NANO, BIO AND GREEN � TECHNOLOGIES FOR A SUSTAINABLE FUTURE. Stef92 Technology, 2014. http://dx.doi.org/10.5593/sgem2014/b62/s26.008.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Chernenkoff, R. A., D. W. Hall, S. Mocarski, and M. Gagné. "Material Characterization of Powder-Forged Copper Steels." In International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1991. http://dx.doi.org/10.4271/910155.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Deumie, Carole, Nathalie Destouches, Michel Cathelinaud, Gerard Albrand, C. Cassagne, and Claude Amra. "Optical materials in powder forms: characterization techniques." In Optical Systems Design and Production, edited by Claude Amra and H. Angus Macleod. SPIE, 1999. http://dx.doi.org/10.1117/12.360110.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Kishimura, Hiroaki, and Hitoshi Matsumoto. "Characterization of shock-loaded nanocrystalline silicon powder." In SHOCK COMPRESSION OF CONDENSED MATTER - 2011: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. AIP, 2012. http://dx.doi.org/10.1063/1.3686545.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Powder Characterization"

1

Tennery, V. (Ceramic powder characterization). Office of Scientific and Technical Information (OSTI), October 1988. http://dx.doi.org/10.2172/5651036.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Klotz, Bradley R., Franklyn R. Kellogg, Eric M. Klier, Robert J. Dowding, and Kyu C. Cho. Characterization, Processing, and Consolidation of Nanoscale Tungsten Powder. Fort Belvoir, VA: Defense Technical Information Center, December 2009. http://dx.doi.org/10.21236/ada538261.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Luther, Erik Paul. Report on Characterization and Processing of MDD Powder. Office of Scientific and Technical Information (OSTI), August 2012. http://dx.doi.org/10.2172/1049345.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Sadergaski, Luke, Sarah Graham, Jeremy Malmstead, Andrew Miskowiec, and James Klett. Synthesis and Characterization of Silicon Carbide Ceramic Composites with CeO2 Powder. Office of Scientific and Technical Information (OSTI), June 2022. http://dx.doi.org/10.2172/1874641.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Sudderth, Laura, Lu Cai, Joshua Zelina, and James Jewell. Characterization of Preliminary Powder Production and Consolidation for Advanced LEU Fuel Concepts. Office of Scientific and Technical Information (OSTI), May 2022. http://dx.doi.org/10.2172/1877386.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Vigil, M. G. Conical shaped charge pressed powder, metal liner jet characterization and penetration in aluminum. Office of Scientific and Technical Information (OSTI), May 1997. http://dx.doi.org/10.2172/486089.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Corbin, D. R., M. M. Eddy, L. Abrams, G. A. Jones, and G. D. Stucky. Flexibility of the Zeolite RHO Framework. Neutron Powder Structural Characterization of Ca-Exchanged Zeolite RHO. Fort Belvoir, VA: Defense Technical Information Center, July 1988. http://dx.doi.org/10.21236/ada197195.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Lockwood, Steven John, Emily Diane Rodman-Gonzales, James A. Voigt, and Diana Lynn Moore. Chem-prep PZT 95/5 for neutron generator applicatios : powder preparation characterization utilizing design of experiments. Office of Scientific and Technical Information (OSTI), July 2003. http://dx.doi.org/10.2172/917119.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Sen-Britain, S. T., N. D. Keilbart, K. E. Kweon, T. A. Pham, C. A. Orme, B. C. Wood, and A. J. Nelson. Chapter 5. Characterization of Surface Oxide Chemistry of New and Recycled Ti-Al Alloy Powders used in Laser Powder Bed Fusion Additive Manufacturing. Office of Scientific and Technical Information (OSTI), July 2020. http://dx.doi.org/10.2172/1644249.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Malghan, Subhas G., Subhas G. Malghan, and Stephen M. Hsu. Ceramic powders characterization. Gaithersburg, MD: National Institute of Standards and Technology, 1995. http://dx.doi.org/10.6028/nist.sp.879.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!